Roger Lowe wrote:
Have a look at the CF Sizer tool -
http://www-947.ibm.com/systems/support/z/cfsizer/
Now, why didn't I think of that? (Too simple and direct, I suppose.)
Of course, that might well be a resource only for IBM exploiters of the
CF, and there are others.
--
John Eells
z
planning for that tomorrow. But in
my opinion, we won't.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
w, because it does neither one.
SMS might be the OP's friend here, as others have suggested.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instruct
Elardus Engelbrecht wrote:
John Eells wrote:
(With today's disk sizes, it's more sensible in my view to just put all the
target libraries on one volume, but what do I know?)
Similar to Mark Zelden's One Pack solution? ;-D
SMS might be the OP's friend here, as others have suggested
:
https://www.lsoft.com/manuals/16.0/htmlhelp/list%20subscribers/LSCommands.html
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
elardus.engelbre...@sita.co.za (Elardus Engelbrecht) wrote:
John Eells wrote:
Before doing anything at all, though, consider renaming the target libraries
using an HLQ with UACC(NONE) to which nobody else has access, and waiting for
an IPL.
John is talking about usage of RACF to remove
raises a good point. I'd assumed separate zones for the different
levels of CICS. If in fact they are in the same zone, he's entirely
correct. Installing the new one will remove the old one.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
Kurt will be along any minute to remind me of steps I forgot...but I did
remember two: making sure the zones themselves are used only for that
level of CICS and not anything else, and removing deleted zones from the
ZONEINDEX.
ee...@us.ibm.com (John Eells) wrote:
If the CICS CSIs are unique
that and try again.
HTH,
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
the narrowly specific scope of the COD, no IBM product I know of
supports z/OS backups to or restores from DVD.
Anyone who wants this function is welcome to open an RFE, of course.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
SYSCATLG, but what about IGGCATxx?
If these members specify different values for ALIASLEVEL, who wins the thumb
wrestle?
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff
.
snip
One may also choose to specify this in IGGCATxx these days using
ALIASLEVEL(n), where n is a number from 1-4. No matter where
(un)specified, the default is the same.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
CSA to make
sure overt action (such as reducing what's in the LPA list) is not
needed to pull the starting address back far enough to preserve CSA free
space.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
pertinent for you, but
perhaps someone from Innovation will comment.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
ee...@us.ibm.com (John Eells) wrote:
sharon.lo...@nc.gov (Lopez, Sharon) wrote:
How does one do a stand-alone restore with no tape drives attached?
snip
You need to have a tape drive or something that looks like a tape drive
(e.g., a VTS) to use DFSMSdss Standalone Restore.
I don't know
?
Something else?
Perhaps the best question is, "What are you trying to do?"
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send emai
I don't remember what was there originally...but books back to z/OS
V1.9, and library centers back to V1.4 are now available on this page
again: http://www.ibm.com/systems/z/os/zos/library/bkserv/index.html
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
and research what release introduced a
new facility or enhancement.
I'm told they'll be back "soon," probably at the bottom of the page
under a new heading that says, in effect, "Ye Olde Books Below."
--
John Eells
z/OS Technical Marketing
IBM Poughkeep
!
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
elardus.engelbre...@sita.co.za (Elardus Engelbrecht) wrote:
Mind you, max blocksize is 32768, but that info is useless. AMBLIST can
*probably* help you, but ...
The maximum block size for z/OS is actually 32760. (We have to reserve
space for those pesky RDWs and BDWs.)
--
John Eells
z/OS
mation.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of John Eells
Sent: Monday, September 28, 2015 6:30 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IBM Electronic Service Agent V1.2
Richards, Robert B. wrote:
I received a notice that the
,
an alternative approach may be to install the fix on a SYSRES, and IPL
with that SYSRES in the event of an unplanned IPL on or after December
15, 2015. A scheduled IPL should be planned for the fix as soon as
possible afterwards, if not yet installed.
--
John Eells
z/OS Technical Marketing
Why would you think it was delayed?
Richards, Robert B. wrote:
Did I miss an announcement that z/OS 2.2 was being delayed?
It was planned for September 30, 2015 according to preview announcements.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
.
Is there some other product that I should have to provide its functionality in
lieu of a replacement? At least they are giving plenty of lead time to resolve
this.
What are you using it for?
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
stuff. Go figure.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
in the USA).
--
John Eells (catching up from vacation)
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
with ServerPac.
As others have said, the week saved by ordering the CBPDO would be
overcome (and more) by the additional time spent for the vast majority
of people. Moreover, the opportunities for error when installing via
CBPDO are far more numerous than those for installing with ServerPac.
--
John Eells
m other than system programmer procedures and discipline.
Based on the above it's hard to understand why we would write a display
command to show something as fuzzy as an "RSU level"...but you could
always ask formally if you wish.
--
John Eells
z/OS Technical Mar
of the physical mount
contention.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
.
BTW, there are actually *three* limits. Just because we can send
technology /out of/ the United States does not mean it's OK to import it
/into/ a particular country. (I am thankful that I'm not involved in
that end of the business!)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee
int Server is a priced optional feature of z/OS.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with t
an
index-wide lock in z/OS V2.2.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ggest that DFSMSdss could optionally use DS1CREDT to
determine whether a data set with DS1LSTAR set to zero should have its
space released. Or, that an "unknown" flag be added to the F9DSCB. Or...
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
-
t for
z/OS 2.1 to run on a z10 box ?
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
is no longer
minor and it would be equally appropriate that its status should be
re-visited and changed to a Defect APAR worthy of some resolution.
I won't disagree. But, as someone already suggested, R.S. should open a
PMR if he would like us to consider it.
--
John Eells
IBM Poughkeepsie
ee
not check on the rules, a spot check seems
to bear this out.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
), but
as I understand it, it will not yield the same performance gains a V5
recompile can gain.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
John Eells wrote:
Charles Mills wrote:
If you are running *programs compiled with V3 or V4* (and are not in the
mood to recompile them on V5).
It is essentially an alternative to V5 (although I suspect IBM would
not be
happy with that statement).
It is of course an alternative to V5
,
The SU Bit String had been frozen for quite a while when I came along
and caused IHASUBIT and its associated macros to be removed from the
(then) MVS/ESA SP Version 4 product after System Generation was finally
withdrawn in all its flavors.
--
John Eells
IBM
V1.12, so everybody
running on a supported release can use it.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
. As
a workaround, you can RESTART the job from step UCLIN, removing all
updates which were already done the previous run and also removing all
occurences of statement DEL SYSMOD(HQX7790) CIFREQ( (UK96644,UK96643)).
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
Would some kind soul please open a PMR?
An FMID is one type of SYSMOD. SYSMODs include APARS, PTFS, FUNCTIONS
(FMIDs), and USERMODs.
Lizette Koehler wrote:
Sharon,
Is HQX7790 a SYSMOD? I might have thought it is an FMID.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
John Eells wrote:
Lopez, Sharon wrote:
Does anyone remember when IEAIPSxx member went away?
In 2001, whatever release that was...
Sorry, it was 2002, in z/OS V1.3. (We created the IWMINSTL sample for
installing a starter policy a year before V1.3 to ease the migration
slightly and I
Nathan Astle wrote:
Hello,
Can someone please share me a sample JCL on recataloging the IODF dataset ?
Did you try DEFINE RECATALOG?
http://publibz.boulder.ibm.com/epubs/pdf/dgt3i210.pdf
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
book to find that out (if you didn't happen to know already).
A number of other commands (perhaps all of them) are also "passed along"
to IDCAMS by TSO/E, such as DEFINE, ALTER, IMPORT, EXPORT, and LISTCAT.
--
John Eells
IBM Poughkeepsie
ee...@
were going for an even thousand until we weighed the value of "one
more generation" against the cost of updating a bazillion messages to
add space for another digit and decided 999 was close enough!
--
John Eells
IBM Poughkeep
Lopez, Sharon wrote:
Does anyone remember when IEAIPSxx member went away?
In 2001, whatever release that was...
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
oes not wrap.
Has anyone stumbled across a better way to find the member generations?
Using the loop process I've found you have to do an almost infinite limit, or
set it fairly high or you risk missing a generation or 100. And the overhead of
the edit isn't trivial.
--
John Eells
IBM Poughkeepsie
, which contains all of the
Fixcat information that REPORT MISSINGFIX uses.>
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
I checked with someone in ServerPac design, and this is indeed what's
up. They will look at the alternatives for solving this, including the
one below.
John Eells wrote:
So...I infer, perhaps incorrectly, that the RESTORE job is also doing a
ZONEMERGE for the SDSF zone. If that's the case
on why you would need your zFS in
Master for your 1.13 systems.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Tom Marchant wrote:
On Mon, 18 Jan 2016 09:04:53 -0500, John Eells wrote:
- You can use SYMBOLICRELATE on DEFINE ALIAS to point to the catalog
thusly named in the master catalog on the production system.
There used to be a requirement that the alias and the data set name be in
the same
the service you want to have installed on those FMIDs before
running BUILDMCS. Unless they have to be installed in the same zones as
z/OS, consider installing them in their own libraries and zones so that
you don't have to do this again.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
Bob beat me to it! But I'll add this:
...when you specify NOVERIFY (or NVFY) on the RESTORE command.
Robert Haimowitz wrote:
You no longer need an ICKDSF IPL tape with the current DFDSS. Bob
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
ast
Effort solution.
This could provide the safety net the OP (or a later poster) was looking
for.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
on SYSMOD.
Or am I misunderstanding what is written? I read it as saying that you can't
use it
for ++USERMODs.
No, I'm sure it's right. I hadn't looked it up. So it has to be a
++FUNCTION, then.
--
John Eells
IBM Poughkeep
Paul Gilmartin wrote:
So, PRE a FUNCTION which is APPLYed only in the Target zone
which NPREs another function which is ACCEPTed in the DLIB
zone.
Not what I suggested.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
lue than the originally intended purpose. It
happens.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
operation. This difference alone has inhibited
conversion in some shops.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@lists
://service.software.ibm.com/holdata/390holddata.html
That page says what I'd remembered, which is that: "The new FIXCAT
statements are available only in the full.txt and full.bin files."
Those are the 730-day files. Also, I don't find FIXCATs in the "Year" file.
--
John Eells
IBM Poughkeep
., Using ISAM Programs with
VSAM Data Sets, in the Using Data Sets book.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
Tom Marchant wrote:
On Thu, 25 Feb 2016 10:25:56 -0500, John Eells wrote:
Anyone know why I get this trying to follow the link?
"Sorry, you are not authorized to search the archives of the
IBM-MAIN-ARCHIVES list from the email address (ee...@us.ibm.com) you
entered on the login s
or SUP tightened?
http://bama.ua.edu/cgi-bin/wa?A2=ind0110=ibm-main-archives=R58709
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...
it quite straightforward. The hardest part was finding out what
the right IBM internal customer number was and getting authorized to use
it. YMMV, and you know who I work for...but I think the Shopz team has
done a fairly nice job of it.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
For those running Linux on z Systems:
http://www-03.ibm.com/press/us/en/pressrelease/48827.wss
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
' to each of those
prompts (except for the first few IIRC).
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message
heard of only one pathological application so far. Of course, it
was one of ours here at IBM. (You can't make this stuff up.)
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
com/software/support/BlueDiamondRegistration.html
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
So, just to close the loop...do we correctly document the required options?
ESHEL Jonathan wrote:
Thank you John. The problem was found thanks to Tony H. as a wrong HLASM
compile option used by us - COMPAT(SYSLIST).
Regards, Jonathan
On Tue, 8 Mar 2016 12:29:48 -0500, John Eells <
.Z
S0047.CPPSMS.OS220119.SMPE.IMST200.SMPSCDS.pax.Z
S0048.CPPSMS.OS220119.IMS.DLIB.CSI.pax.Z
S0049.CPPSMS.OS220119.IMS.TARGET.CSI.pax.Z
S0050.ROOTIMS.200.pax.Z
S0051.CPPSMS.OS220119.GLOBAL.CSI.pax.Z
3) Do I have to setup unzip JCL for each of these pack files on Order and
content directory separately.
4
to structure them to make it easy to find what you need and to provide
the FIXCATs needed to streamline checking for the PTFs you need.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive
Neale Ferguson wrote:
> For those who saw Connor at SHARE or Hillgang. He spoke at POK today:
>
> https://twitter.com/rossmauri/status/712740819376193536
>
And, it was a lot of fun to hear the story again!
--
John Eells
IBM Poughkeepsie
ee..
survey...there's a write-in box you can use
for the page forward and back function you want.
Here's the link again:
https://www.surveygizmo.com/s3/2626267/IBM-z-OS-Product-Documentation-Survey-2016
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
k, or are too polite to
tell me I'm crazy and aiming at my foot.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with t
, so obviously the resulting LA instruction gets an error.
If we are the only ones having this problem, we must be doing something very
weird ...
Regards, Jonathan
-Message d'origine-----
De : John Eells [mailto:ee...@us.ibm.com]
Envoyé : mercredi 2 mars 2016 17:14
Objet : Re: Problem applying
and use
GROUPEXTEND to pull in the fixes.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
after what IBM sent you), and add a DDDEF entry for it.
As John Eells mentioned you could still have some issues with modules at
differing levels of maintenance. But lets get your buildmcs done, received,
and an applycheck run and see where to go next...
SMP/E APPLY processing wi
://www-01.ibm.com/software/network/commserver/SMCR/
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
/Redbooks.nsf/RedpieceAbstracts/sg248329.html?Open
Forwarded Message
Subject: Re: IMS V14 Installation
Date: Mon, 28 Mar 2016 15:42:17 -0400
From: John Eells <ee...@us.ibm.com>
To: IBM Mainframe Discussion List <ibm-m...@bama.ua.edu>
As you are the one who would sel
new, larger library. This library
will need to have another name.
- Change your logon procedure to use the new library.
If we try the above method, there might be impact to the users who are
logged in.
yes, its in sysplex and it is allocated in non-sms volume
--
John Eells
IBM Poughkeep
). Following the directions in the PSP should pull those
in as needed.
On the other hand, if you followed the directions in the PSP to specify
all the FIXCATs we say you should use, and you were still missing PTFs
needed for your z13s, we need to fix that!
--
John Eells
IBM Poughkeepsie
ee
HFS data sets
- Parmlib concatenation data sets
- XRC Control, Master, or Cluster non-VSAM data sets
This should *not* be read to mean or imply that everything that is not
listed here is supported above the line. It's just the list of things I
know about that don't work.
--
John Eells
et).
Can you elaborate a bit?
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
data sets.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
a "parmlib" in the generic sense, and not "a data set
in the systems parmlib concatenation," then convert away...
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive acces
.
Not quite what you were imagining but at a macro level this is the same
as "get a basic z/OS going," and "use SMP/E to download your" ServerPac
or CBPDO, install it, and customized it for IPL. This has all been
there since z/OS V1.1
on DVD, and you can get z/OS
using either one (ServerPac is, of course, recommended as it's far less
work). A fairly high percentage of ServerPac orders are on DVD. As Jim
posted, z/OS IPL from the HMC is not supported.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
n't see anything in the BUILDSA sections.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
o put dump files of your own on DVD and restore
from them using the HMC's DVD drive, I suggest you put in a requirement
using RFE.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive acc
which
corresponds to phyrec-size*phyrecks/trk * 85344.
I would expect that at least the HI-A-RBA should be 85344 * 56K = 4893966336 ???
=> there is about 0.8 GB wasted in this allocation
In the listcat data displayed, there is nothing saying that there is a waste ?
Can you comment about this ?
Specifically the volser followed the DSN followed by a '1' I assume for format
1 DSCB for by the volser again
Sent from my iPhone
On May 10, 2016, at 2:52 PM, John Eells <ee...@us.ibm.com> wrote:
What information are you trying to get, exactly?
michelbutz wrote:
Hi
I need to obtain dataset
What information are you trying to get, exactly?
michelbutz wrote:
Hi
I need to obtain dataset space information
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
ou can get a hash to verify but can't
verify a signature?
- Anything else to think about?
Lots, I'm sure! It's probably worth also looking at the implementation
of signed SMF data to see how they do it.
Andrew Rowley
--
John Eells
IBM Poughkeepsie
ee...@
e the last.
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
that any use of SHA-1 for anything at all is not acceptable whether
or not it's security related? Something else?
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions
install the feature from a CBPDO.
--
John Eells (reloading brain after vacation)
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
elbow room for day-to-day changes.
You should be able to find my old post in the archives somewhere...
--
John Eells
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send emai
John Eells wrote:
Gibney, David Allen wrote:
If you look back a bit in IBM-MAIN this year, you will find the thread
where I also had missed ordering these FMIDs with z/OS 2.1
IBM was able to send me (via DVD) an z/OS 2.1 order which did contain
them. And I was able to use BUILDMCS to extract
201 - 300 of 564 matches
Mail list logo
