would give such info...
-------
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http://br.linkedin.com/in/lrosalen
Em qua, 15 de ago de 2018 às 08:27, Jake Anderson
escreveu:
> Hi
>
> Any documentation or manual which can help
,
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http://br.linkedin.com/in/lrosalen
2018-07-06 1:02 GMT+02:00 Jackson, Rob :
> That's because if the origi
Right tool for the right job.
Read about WTO (REXX) command in Netview commands manual.
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http
Thanks Kees, that's exactly what I tried to say and failed miserably :)
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http://br.linkedin.com
e resolved in the executing LPAR (even
with SYSAFF=*);
I also don't know about the documentation, just learned from a colleague
that had worked on our issue.
-------
*Lucas Rosalen*
Hi Anne,
It's been a long time I played with that, but have you tried to configure
it to write messages to (if I recall it correclty) /dev/console?
Regards,
---
*Lucas
Hello Sean,
Are you sure you're running on a z/OS version AND class that allows symbols
substitution? Apparently the original was no replaced.
Regards,
---
*Lucas
Does this work for you?
http://www-01.ibm.com/common/ssi/ShowDoc.wss?docURL=/common/ssi/rep_sm/1/760/ENUS2964-_h01/index.html_locale=en#Header_34
On Wed, Jun 6, 2018, 08:30 Gadi Ben-Avi wrote:
> The 2964 is the z14.
> Go to www.redbooks.ibm.com and search for z14.
> Look for the Technical
The ALIAS must be in the same catalog as the actual dataset.
I think you could bypass this in a very "strange" way by:
1. definig an ALIAS XX35.SYS3 in your CATALOG.USERTSO poiting to
CATALOG.USERSYS.
2. Then, definig your ALIAS with the SYMBOLICRELATE in CATALOG.USERSYS.
Regards, Lucas
On Tue,
I'm glad!
Hot and sunny day here, it's a pity I had some work to do during the night
and only woke up now very late in the afternoon.
How is it in Łódź?
Lucas
On Sat, May 26, 2018, 12:38 R.S. <r.skoru...@bremultibank.com.pl> wrote:
> W dniu 2018-05-26 o 11:51, Lucas Rosalen pisze:
&
In jes parms, check jobclass definitions for syssym=allowed.
Maybe they run in different job classes
Lucas
On Sat, May 26, 2018, 11:40 R.S. wrote:
> I have some job with the above symbols. It works fine on one system, but
> on another symbols are not
Hello Art,
I think $DSPOOL(vv),UNITDATA would show that information in ATTRIBUTE
parm.
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http
now), but following the manuals is always a good idea.
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http://br.linkedin.com/in/lrosalen
2018-05-16 19:44 GMT+02
ce i
parse arg mtxt
SAY 'DATASET NAME IS' MTXT
MVS "SEND '"MTXT"' USER(USR54) NOW"
exit
Here you would have:
MSGID =
DSET =
MTXT = USR54LST - STARTED - TIME=07.54.54
Good luck!
------
uot;
EXIT
==
-------
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http://br.linkedin.com/in/lrosalen
2018-05-14 9:28 GMT+02:00 Werner Kuehnel <werner.kueh...@mannheimer.de>:
> Hello Venkat,
> this is ho
Hi Venkat,
What about using the syntax below?
"MVS SEND 'your_message' USER(user) NOW"
-------
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ib
Try changing FDIREXX script to the following:
/* REXX */
"SUBMIT 'USR1.REXX.CNTL(REXXJCL)'"
-------
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ib
like a new generation. Here =>
http://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe_ID=101120
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...
to the support group
- still no change, but that was 3 days ago.
Maybe it's worth a try with the Operating Systems as well?
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal
No, it was introduced on z/OS 1.12.
https://books.google.pl/books?id=NBrCAgAAQBAJ=PA99=PA99=autorxx+z/os=bl=15cjhopIc9=VC-uC5ETns_Ag623hjC5tk6doy4=pt-BR=X=2ahUKEwj_iPOq7p7ZAhUB3iwKHeEDCL8Q6AEwCHoECAcQAQ#v=onepage=autorxx%20z%2Fos=false
Thanks, Lucas
On Feb 11, 2018 22:47, "Tony Thigpen"
Ah, yes, you're right... in this case you have to change the CONTENT ...
most likely you have CONTENT(ALL) and that's what should be changed
---
*Lucas Rosalen*
rosalen.lu
,
---
*Lucas Rosalen*
rosalen.lu...@gmail.com / lucas.rosal...@ibm.com
http://br.linkedin.com/in/lrosalen
2018-02-01 10:23 GMT+01:00 Gadi Ben-Avi <gad...@malam.com>:
Long shot, but maybe check if the OUTDISP for this class is set to
WRITE,WRITE. Some sysout archiving softwares need that.
Regards, Lucas
On Jan 30, 2018 07:10, "Elardus Engelbrecht"
wrote:
> Peter wrote:
>
> >We have updated the output class D in our JES output
Hello Hobart,
Do you have any RFE already opened for that? I would surely vote for it
(plus this might be a good place to broadcast its ref. number)!
Thanks, Lucas
On Nov 16, 2017 14:36, "Hobart Spitz" wrote:
Someone on TSO-REXX wrote:
> Yes and if IBM would give us PIPES
I think Lionel's question was more about mounting filesystems for non-IBM
products under /service directory. Not really about service (APAR/PTF) for
products.
Anyway, I've never seen any recommendation for the original subject, thus
I'm also interested.
Lucas
On Oct 13, 2017 18:01, "ITschak
Back to my desk, it looks like APAR that I refer to is OA51343.
Lucas
On Oct 6, 2017 12:44, "Lucas Rosalen" <rosalen.lu...@gmail.com> wrote:
> If you're running z/OS 2.2 (maybe 2.1 as well) there's an JES2/WLM APAR
> that might be of interest.
> I don't have its numbe
If you're running z/OS 2.2 (maybe 2.1 as well) there's an JES2/WLM APAR
that might be of interest.
I don't have its number now, but you might find it in some discussions on
this forum.
Lucas
On Oct 6, 2017 12:22, "Tommy Tsui" wrote:
> Hi all,
> We are running in wlm mode
RACF errors in syslog?
On Aug 24, 2017 11:48, "גדי בן אבי" wrote:
> That’s the user id and password that shopzseries created :-)
>
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of ITschak Mugzach
> Sent:
I second you in every word.
So, by my own previous personal experience, having a PC weenie manager is
not necessarily a no go.
---
*Lucas Rosalen*
Emails: rosalen.lu
2.
Thanks,
-------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-08-21 12:22 GM
Planned GA is Sep 13th
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
We use 2 methods at the same time with System Automation:
- INGLKUP REQ=JOB COMMAND=STOP to perform a P AXRxx,A=
- P AXR
---
*Lucas Rosalen*
Emails: rosalen.lu
Yes, it is.
In my previous and current shops we're using it.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn
Ah, nice to know - I tested on 2.13.1
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linked
,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-07-17 13:08 GMT+02:00 R.S. <r.skoru...@bremultibank.com.pl>
fun,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-07-07 20:42 GMT+02:00 Patrick Falcone <
01252608064
=yyy
4. SETPROG LNKLST,ACTIVATE,NAME=name
Regards,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn
Yes!
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 7
send those to an Application sys (releasing space
on Ksys vols).
Could you share your experiences with Ksys SYSLOG/NETLOG archives? (May be
off-list if you'd prefer)
Thank you,
----
ya,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-06-23 11:49 GMT-03:00 Dirceu Bi
do whatever you like.
-------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-06-19 14:30 GMT
Maybe this dataset is allocated by XCF and LLA in another system of the
sysplex, you might wanna check that.
Lucas
On Jun 17, 2017 10:53, "Edward Finnell" <
000248cce9f3-dmarc-requ...@listserv.ua.edu> wrote:
>
> Example 2:
> To display resource information about all resources whose major
True, I also don't see it.
However, my research returned some results =>
https://communities.ca.com/search.jspa?q=NetMaster
---
*Lucas Rosalen*
Emails: rosalen
-community/content?filterID=contentstatus%5Bpublished%5D~category%5Bca-tpx-session-management-for-zos%5D
Regards,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa
y OFF for
everything.
-------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +
data), which I found to be a very good tool to discover who/what
used which software/version when. Very granular data in a distance of a
mouse click.
---
*Lucas Rosalen
Hello Dean,
I think what you need is this doc =>
https://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/FLASH10863
Thanks,
---
*Lucas Rosalen*
Emails: rosalen
,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-04-28 10:54 GMT+02:00 Elardus Engelbrecht <
elardus.engelbre...@sita.co.za>:
,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-04-28 9:59 GMT+02:00 ibmm...@foxmail.com <ibmm...@foxmail.com>:
>
>
Just for correctness, if I recall correctly CA-View is the old SAR and just
do syslog/joblog archival/retrieval.
I'm quite sure my former customer used CA-Dispatch for report distribution.
Lucas
On Apr 10, 2017 16:37, "Lizette Koehler" wrote:
There are products out
Hi Gadi,
Did you have AUTOIPL statements coded in the in-use DIAGxx member?
Anything in Hardware Messages?
Lucas
On Apr 9, 2017 09:56, "גדי בן אבי" wrote:
Hi,
We IPL’s one of our systems last night and using the V
XCF,,OFFLINE,REIPL to remove it from the Sysplex, and
$DJjobnumber,LONG might give you some tips
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linked
,IFBSEXIT)
//DIRECTWK DD UNIT=SYSDA,SPACE=(CYL,50)
//TOURIST DD SYSOUT=$,DCB=BLKSIZE=133
//EREPPT DD SYSOUT=$,DCB=BLKSIZE=133
//SYSINDD DUMMY
Regards,
---
*Lucas
Yes, they can. Done this some times before.
Regards, Lucas
On Mar 16, 2017 21:32, "Herring, Bobby" wrote:
> I am in the process of receiving a large RSU maintenance order. I have
> filled up three SMPPTS datasets that were not defined large enough.
>
> Can these be
s ago, huh? :)
-------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-02-24 13:51 GMT-03:00 Tom Marchant <
000
on a smaller shop where all users' directories were
defined in one single filesystem. In this case, we didn't use automount.
Thanks,
---
*Lucas Rosalen*
Emails: rosalen.lu
, refer to *
z/OS V2R3 Planning for Installation* (GA32-), when available.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.
task.
I can't say this is the way I "prefer". It just had "always been like that"
(yes, I hate this excuse!) and I didn't feel like changing at the time :).
See ya,
-------
I think the key here is the SYSAFF=(IND,ANY)...
Try to take INDependent off before purging, with $TJQx,SYSAFF=(-IND)
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2017-01-05 10:39 GMT+01:00 Ravi Gaur <gaur.ravi2...@gmail.com>:
> Delete datasets from Disk/3390 which are having e
Check if JES2 are running in Independent Mode. Can't remember the command
for that.
It had been suggested before, but I also think $DJ,LONG is the place to
start
On Dec 5, 2016 01:58, "John McKown" wrote:
> On Sun, Dec 4, 2016 at 3:13 PM, Vitullo, Carmen P <
>
n you have described sounds WaD (work as designed).
-------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http:/
uot; category.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-11-15 10:42 GMT+01:00 Edward Finnell <
000248cce9f3-dmarc-requ...@listserv.ua.edu>:
> As of righ
,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-10-28 11:59 GMT-02:00 van der Grijn, Bart (B) <bvandergr...@dow.com>:
> Jake, we
this...
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-10-18 15:35 GMT+02:00 Vernooij
I know that some IBM sites are designed to not respond to a ping
request not sure if this is the case though.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com
of not being able to open it
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Maybe
http://www-969.ibm.com/software/reports/compatibility/clarity/index.jsp can
have good reports?
Regards,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa
It looks like in z/OS 2.2 (not sure about other versions) you can use:
F AXR,SYSREXX REXXLIB ADD DSN(data_set_name) VOL(volume)
Regards,
---
*Lucas Rosalen*
Emails
Exactly /usr/lpp/hzc/include/IBM/
I've also checked in some PMR before applying in my systems.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
I think Andy nailed it. Wrong parenthesis in start command.
Lucas
On Aug 2, 2016 21:01, "Lizette Koehler" wrote:
> The sample JES2 Start up proc contains a HASPPARM DD Statement.
>
> I do not see one in your expanded JCL.
>
> //JES2 PROC N=SYS1,L=SHASLNKE,
>
Now I've read again. This looks like a HFS dataset (PS), not a ZFS (VSAM
LDS). Try the DELETE command with IKJEFT01 pgm, not IDCAMS. Or simply D in
front of the dataset name on 3.4.
Lucas
On May 27, 2016 17:31, "Lucas Rosalen" <rosalen.lu...@gmail.com> wrote:
> Looks like thi
Looks like this is only a catalog entry, no dataset anymore (if ever).
Try DEL 'dataset.name' NSCR
Lucas
On May 27, 2016 17:20, "Sai M" wrote:
> Hi,
>
> I am not able to delete DSN. I am getting below error.
>
> ENTRY ..XXX.HFS NOT FOUND+
> ** ENTRY ..XXX.HFS
had an
issue with the regions.
-----------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-05-27 16:06 GMT+02:00 John McKown <john.archie.mck...@gmail.com>:
&g
I know of IBM Tivoli Asset Discovery for z/OS (TADz).
It does a very good job and can show you many different graphical reports
in a web application called Analyzer (of course you also need to have this
part installed/configured) getting data straight from OMVS.
I don't know the price of it, as we
Complete description of S077 can be found here:
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.ieah700/m014885.htm
Regards,
---
*Lucas Rosalen
enough, there could be comments in the
JCLs (if any uses this/these product(s)).
Regards,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lr
,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-05-07 8:39 GMT+02:00 Lucas Rosalen <rosalen.lu...@
H maybe MemLimit and SHMemMax on OMVS segment are also good parms to
check/increase.
Lucas
On May 7, 2016 06:06, "Phil Smith III" wrote:
> Rob Schramm offered:
> >ASSIZE will set the user limit for storage. Set via RACF.
>
> Still no, unless I misunderstood (quite
or something else...
Regards,
-----------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-
If I recall it correctly, it's either MAXSHAREPAGES and/or SHRLIBRGNSIZE
parms in BPXPRMxx.
Regards,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa
ADRDSSU copy with RENAME and either DDDEF update on SMPE or DD statement in
JCL will do the trick.
However, this could (and should?) be "automated" somehow, for example by
using SYSRES name as part of the dataset name, thus using symbol in
BPXPRMxx.
Regards, Lucas
On May 6, 2016 19:23, "George
+1 for REPRO MERGECAT.
I've done this for Netview's datasets - with all Netview's STCs down
because I'm a chicken :)
Lucas
On May 5, 2016 19:05, "Peter" wrote:
What if if is a db2 datasets ? I believe to have safer move a shutdown is
necessary ?
On May 5, 2016 10:19 PM,
.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-04-22 16:04
though...
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 7
...
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 (71) 792 809 198
2016-04-20 11:40 GMT+02:00 Vince Getgood <getgo...@hotmail.com>:
>
apply.
Hope this helps a bit.
Regards,
-------
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin
ot;
might change
end
return
With small enhancements, this would let you get the "MVS C taskname,A="
command issued
-----------
*Lucas Rosalen*
Emails: rosale
...
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 792 809 198
2016-02-04 18:31 GMT+01:00 zos reader &l
.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 792 809 198
2016-02-04 19:08 GMT+01:00 Mike Schwab <mike.a.sch...@
Disregard this email... I've read the original post wrong... multitasking
is not so easy, after all
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 792 809 198
2016-02-01 16:17 GMT+01:00 Lizette Koehler <stars...@mindspring.com>:
> If you have the latest hold data, then you can use
tml
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 792 809 198
2016-02-01 14:31 GMT-02:00 John Eells <ee...@us.ibm.com>:
> Liz
TSO ISRFIND as well...
On Feb 2, 2016 06:10, "Paul Gilmartin" <
000433f07816-dmarc-requ...@listserv.ua.edu> wrote:
> On Mon, 1 Feb 2016 22:57:24 -0600, Ed Gould wrote:
>
> >Sounds like a SHARE requirement to me.
> >
> ??? Fixing a bug shouldn't be a SHARE requirement; it should be an SR.
>
>
,
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 792 809 198
2016-01-22 11:58 GMT+01:00 Brian Westerman <brian_wester...@syzygyinc.com>:
>
Both my current and previous customers used CPCs "nicknames" on HMC.
It was already setup like that in both cases, so don't ask me how to do it
:)
Regards,
----
.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 792 809 198
2015-12-23 17:13 GMT-02:00 Carl Edwards <
00df3759e3e7-dmarc-requ...@listserv.ua.edu>:
> I have a client that
Looks like $DINTRDR would suffice or $DINTRDR,C. Check this out:
https://www-01.ibm.com/support/knowledgecenter/mobile/#!/SSLTBW_2.1.0/com.ibm.zos.v2r1.hasa200/dintrdr.htm
Lucas
On Dec 7, 2015 15:33, "Gabor Hoffer" wrote:
> How can I inquire the internal reader
You got the right command, go for it.
Lucas
On Dec 7, 2015 15:16, "Richards, Robert B." wrote:
> I make such infrequent changes to my CF policy that I never remember how
> to clear the "POLICY CHANGE PENDING - DELETE" condition. I issued a SETXCF
> START,REALLOCATE
.
---
*Lucas Rosalen*
Emails: rosalen.lu...@gmail.com / *lrosa...@pl.ibm.com
<lrosa...@br.ibm.com>*
LinkedIn: http://br.linkedin.com/in/lrosalen
Phone: +48 792 809 198
2015-12-01 14:56 GMT-02:00 Steve Thompson <ste...@c
1 - 100 of 174 matches
Mail list logo