>The real question is whether dynamic _deletion_ and subsequent
>_replacement_ of a wrongly-defined IPL-time HMCS specification will
>work. On the surface it seems like it ought to work, but I think there's
>a reasonable chance it won't...
Well, it does. :-) The only surprise was that I had to
A good source of information on HMCS is located in redbook "z/OS V2R1 Technical
Update", SG24-8140.
Look on Chapter 14 "Consoles and Auto-Reply", Section 14.2 "z/OS support for
integrated 3270 console".
--
For IBM-MAIN
On 10/17/2016 10:05 AM, Jesse 1 Robinson wrote:
As of z/OS 2.1, consoles can be added or removed dynamically. It certainly
applies to MCS/EMCS consoles, but I don't know about HMCS consoles. This
dynamic process builds control blocks necessary to support a console being
added. For HMCS, you
As of z/OS 2.1, consoles can be added or removed dynamically. It certainly
applies to MCS/EMCS consoles, but I don't know about HMCS consoles. This
dynamic process builds control blocks necessary to support a console being
added. For HMCS, you may need an IPL on each system.
.
.
J.O.Skip
rame Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Tom Conley
Sent: Saturday, October 15, 2016 7:37 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: EXTERNAL: Re: HMCS consoles
On 10/15/2016 10:22 AM, Barbara Nitz wrote:
> Hi Tom,
>
>> I found this forum post, which says you c
>If you need help setting them up, send me an offline email and I can direct
>you through it. It will take you all of about 10 minutes to do the OSA
>changes and another 5 to generate the NIP OS consoles in your IODF.
Thanks Brian, we do have those consoles set up (someone else did it), and
W dniu 2016-10-16 o 11:00, Brian Westerman pisze:
When you ordered your z13, did it not come with at least one OSA-ICC adapter?
If it did, then you have (up to) 120 consoles that you can use at IPL for the
LPARs in your sysplex.
If you need help setting them up, send me an offline email and
-Manager
323-715-0595 Mobile
626-302-7535 Office
robin...@sce.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Brian Westerman
Sent: Sunday, October 16, 2016 2:01 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: HMCS consoles
When you ordered your z13, did it not come with at least one OSA-ICC adapter?
If it did, then you have (up to) 120 consoles that you can use at IPL for the
LPARs in your sysplex.
If you need help setting them up, send me an offline email and I can direct you
through it. It will take you
>> CONSOLE DEVNUM(HMCS) NAME(HMCS) AUTH(MASTER) ROUTCODE(ALL)
>> INTIDS(Y) LEVEL(ALL) UNKNIDS(Y)
>
>I've noticed SHARE and IBM Tech-U presentations full of the same silly
>example that can't possibly work. They recommend exactly what you have:
>CONSOLE DEVNUM(HMCS) NAME(HMCS) etc. which
On 10/15/2016 8:13 AM, Tom Conley wrote:
More silly examples from IBM I thought was SMF id, but I
just found out that apparently there's not a system symbol for SMF
id??
Haha! That's funny. Even their "corrected" example isn't right! SMH>
Our z/OS sysnames are five characters long
On 10/15/2016 10:56 AM, Ed Jaffe wrote:
On 10/15/2016 7:36 AM, Tom Conley wrote:
For example, you could define the HMCS similar to:
CONSOLE DEVNUM(HMCS)
NAME()
I think if you add the SYSNAME to the HMCS name, you should be OK.
Except that SYSNAME is a 1-8 character name. Better to
On 10/15/2016 7:36 AM, Tom Conley wrote:
For example, you could define the HMCS similar to:
CONSOLE DEVNUM(HMCS)
NAME()
I think if you add the SYSNAME to the HMCS name, you should be OK.
Except that SYSNAME is a 1-8 character name. Better to use as
a general rule.
--
Edward E
On 10/15/2016 7:22 AM, Barbara Nitz wrote:
I have this in my (shared) CONSOLxx:
CONSOLE DEVNUM(HMCS) NAME(HMCS) AUTH(MASTER) ROUTCODE(ALL)
INTIDS(Y) LEVEL(ALL) UNKNIDS(Y)
I've noticed SHARE and IBM Tech-U presentations full of the same silly
example that can't possibly work. They
On 10/15/2016 10:22 AM, Barbara Nitz wrote:
Hi Tom,
I found this forum post, which says you can have one HMCS console per
z/OS image (WTW).
I have this in my (shared) CONSOLxx:
CONSOLE DEVNUM(HMCS) NAME(HMCS) AUTH(MASTER) ROUTCODE(ALL)
INTIDS(Y) LEVEL(ALL) UNKNIDS(Y)
I had assumed
Hi Tom,
>I found this forum post, which says you can have one HMCS console per
>z/OS image (WTW).
I have this in my (shared) CONSOLxx:
CONSOLE DEVNUM(HMCS) NAME(HMCS) AUTH(MASTER) ROUTCODE(ALL)
INTIDS(Y) LEVEL(ALL) UNKNIDS(Y)
I had assumed that this definition would
On 10/15/2016 7:56 AM, Barbara Nitz wrote:
When we started working with our z13, IBM recommended to use the integrated
console(s) that are defined as HMCS to z/OS. So we put in the definition and
managed to IPL the first system in each sysplex with the HMCS console instead
of Operating System
On 10/15/2016 7:56 AM, Barbara Nitz wrote:
When we started working with our z13, IBM recommended to use the integrated
console(s) that are defined as HMCS to z/OS. So we put in the definition and
managed to IPL the first system in each sysplex with the HMCS console instead
of Operating System
When we started working with our z13, IBM recommended to use the integrated
console(s) that are defined as HMCS to z/OS. So we put in the definition and
managed to IPL the first system in each sysplex with the HMCS console instead
of Operating System Messages console, which is hard to handle.
19 matches
Mail list logo