Kasper_b wrote:
> Hi, first thanks for al the great work.
> I keep getting this: "Error: Couldn't load
> Plugins::ShairTunes2W::Plugin"
> Here's a bit of info:
> ...
Hi I got that error
* Solution was
* sudo apt-get install libssl-dev
* $ sudo perl
Hi, first thanks for al the great work.
I keep getting this: "Error: Couldn't load
Plugins::ShairTunes2W::Plugin"
Here's a bit of info:
System info:
Code:
pi@Rpi3_SBS:~ $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
This not an zero, I should remove that :-)
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000,
ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi
B3, B2, Pi B+, 2xPi A+, Odroid-C1,
Thank you, I understand, you have done a great job so far . I believe my
network is quite stable but will look into. I will use computers wired
to the router. I will also try itunes. If you need to tests scenario or
more information I am happy to provide or help at anytime.
No, it's not because you don't have hardware but if you were not
planning to have SB hardware and are mainly interested in airplay, then
there might be other options. For your tests, I also recommend that you
do not try synchronized players. I agree the solution is temperamental
today and believe
philippe_44 wrote:
> If you don't have real SB hardware, there are other solutions to AirPlay
> to a pi device. I'd recommend looking at these (shairport) as the whole
> AirPlay to SB is a complicated exercice that requires a really solid
> network and wifi setup, I know that for sure :-). Of
If you don't have real SB hardware, there are other solutions to AirPlay
to a pi device. I'd recommend looking at these (shairport) as the whole
AirPlay to SB is a complicated exercice that requires a really solid
network and wifi setup, I know that for sure :-). Of course you should
still use
I am a newbie with Squeezebox. I learnt about it from a site that
explains how to setup a multiroom audio system using rasberry pi's. I
decided to change the set up since I had a computer running as a server
in my house already. After a little bit of search I found a pre-compiled
sbssvn virtual
Verulamius wrote:
> Philippe
>
> Thanks for the new version, it is now working fine with my cc audio.
>
> You also referred to your new aircast program. How do I get that onto
> and running on my RPi? Is it something I can apt-get ?
No quite, but there is only one executable file to
Philippe
Thanks for the new version, it is now working fine with my cc audio.
You also referred to your new aircast program. How do I get that onto
and running on my RPi? Is it something I can apt-get ?
Verulamius's
philippe_44 wrote:
> Sorry now I'm lost - what do you mean by 'now' ? I thought you said in
> your previous post that you have a gigantic delay. So you mean with all
> sync, you have the delay but with only the booms you have 1-2 sec (which
> is normal)? So the culprit is adding the radio?
>
fraho wrote:
> Only my two booms are synchronized and the delay there is now 1-2s no
> matter if sync is turned on or not. Yes, there are some problems as soon
> as activating the second boom in Airfoil. Flac is also working with
> them. The squeezebox Radio however is only working with flac
Only my two booms are synchronized and the delay there is now 1-2s no
matter if sync is turned on or not. Yes, there are some problems as soon
as activating the second boom in Airfoil. Flac is also working with
them. The squeezebox Radio however is only working with flac disabled.
fraho wrote:
> And with debugging enabled
>
> 23554
Interesting - Flac should definitively work. But it seems that you are
using Shairtunes2 to send to 2 synchronized players. Can you please try
with no synchronized player. This has a lot of impact on the way things
are streamed and I'd
And with debugging enabled
23554
+---+
|Filename: server.log |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=23554|
23553
+---+
|Filename: server.log |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=23553|
+---+
fraho wrote:
> The 25 seconds thing happens to both Booms but from performing another
> test with my Squeezebox radio, which usually isn't plugged in, I noticed
> that it's worse with that. Airfoil connects to it without problems but
> no sound at all there and it lasts about over one minute
philippe_44 wrote:
> I did some important changes linked to that. But the 25s thing is just
> baffling. There is no such long buffer anywhere. It happens to any
> player you're sending to?
The 25 seconds thing happens to both Booms but from performing another
test with my Squeezebox radio,
fraho wrote:
> Hi Phillipe, since your latest dev version 0.72.10 Airfoil is working
> again for me, like AirAudio with a delay of 25 seconds but the error
> message is gone and I can hear sound :) Is this just some kind of
> coincidence or did you change some relevant code?
I did some
Hi Phillipe, since your latest dev version 0.72.10 Airfoil is working
again for me, like AirAudio with a delay of 25 seconds but the error
message is gone and I can hear sound :) Is this just some kind of
coincidence or did you change some relevant code?
Philippe
Thanks. I will have a try when I get back home over the weekend.
Thanks for your help.
Verulamius
Verulamius's Profile: http://forums.slimdevices.com/member.php?userid=53119
View this thread:
philippe_44 wrote:
> It's a problem that comes from the new iOS release and the lack of sync
> bit combined with the way they handle playback start. It's causing an
> issue with the chromecast plugin that I don't now yet how to solve.
I found a solution that handles properly the strange (?) way
Thanks, I think my issue with Tidal streaming is solved with version
0.72.9.
I have successfully been listening to Tidal for several hours now.
Before it usually would break the connection within 1 to 10 minutes.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
Verulamius wrote:
> Thanks I will try and download into my RPi and try it out.
>
> I do not use iTunes so unable to confirm, but the same problem arose
> from music stored on my iPhone (FLAC) as well as music streaming via my
> iPhone over my wifi.
It's a problem that comes from the new iOS
Thanks I will try and download into my RPi and try it out.
I do not use iTunes so unable to confirm, but the same problem arose
from music stored on my iPhone (FLAC) as well as music streaming via my
iPhone over my wifi.
Verulamius wrote:
> Philippe
>
> I am having a slight problem with v0.72.8. I can play to my Radio and
> Touch devices fine from my iphone (10.3.3), however I am having problems
> getting the stream to play on my chromecast audio device. There appears
> to be no difference in the shairtunes2
Philippe
I am having a slight problem with v0.72.8. I can play to my Radio and
Touch devices fine from my iphone (10.3.3), however I am having problems
getting the stream to play on my chromecast audio device. There appears
to be no difference in the shairtunes2 log between my Radio and
philippe_44 wrote:
>
> Anyway, how "huuge" is the delay? Wrt AirFoil, I really don't know. I
> use 5.1.7 on Windows and it works just fine
It's about 25 seconds delay
fraho's Profile:
philippe_44 wrote:
> Does it still happen with 0.72.8?
Yes it still happens, but i have found out that it only happens when I'm
streaming from Tidal. If I'm streaming from TuneIn it can play via
ShairTune2w forever.
Unfortunately I don't have another I-thing that I can try to stream
through to
sbp wrote:
> Thanks for your answer.
> Somehow I only have a problem with shairtune as squeezelite keeps
> playing for a long time on this player. A rpi0 zero wifi.
> I just tried shairtunes again and what happens is that on my iPad the
> connection to the player break and it is connected to
Wigster wrote:
> Hi,
>
> I was going to report that the latest release version of Shairport2W
> (0.70.?) had a problem with stuttering, but I've just upgraded to the
> latest dev and that is no longer a problem. However, I am now getting a
> conn_handle_request error in the LMS log. It happens
Hi,
I was going to report that the latest release version of Shairport2W
(0.70.?) had a problem with stuttering, but I've just upgraded to the
latest dev and that is no longer a problem. However, I am now getting a
conn_handle_request error in the LMS log. It happens every time I try to
connect
fraho wrote:
> And how did you find out that? Brilliant work, AirAudio is working
> again, with a huuuge offset between what's on screen/what you're hearing
> and concerning commands, but at least I can hear something and that's
> great :D! Airfoil (5.5.2 MacOS, 5.1.6 Windows) still quits with
philippe_44 wrote:
>
> Long story short, I'v set a workaround that shoudl not impact anything
> else (cross fingers) but you should contatc AirAudio developer and tell
> him
And how did you find out that? Brilliant work, AirAudio is working
again, with a huuuge offset between what's on
fraho wrote:
> I've meanwhile rebooted every single component within my network,
> unfortunately without any change. Besides the audio streaming problem
> depending on the controller there are also differences with the transfer
> of metadata. iTunes Airplay: Audio o.k., Artist/Title o.k., Native
philippe_44 wrote:
> I'll test more but on my setup (LMS on Windows or Pi3) and
> AirFoil/iTunes on Windows they all work. I tried again AirFoil yesterday
> on my Win machine and it worked. I'll get AirAudio on some spare Android
> device
>
> [edit]: I've tried more AirFoil on Windows w/o
fraho wrote:
> The delay with native MacOS Airplay didn't occur a moment ago, but
> Airfoil still doesn't work at all. I am NOT sure that this was not the
> case with 0.72.5, but I am 100% sure Airfoil was working with the stable
> version.
>
> LMS/Shairtunes is running on a Synology NAS
>
philippe_44 wrote:
>
> Seriously, are you sure it was not the case with 0.72.5?
>
> And can you tell me exactly what runs where: LMS, shairtunes, Airfoil,
> iXX devices, itunes ...
The delay with native MacOS Airplay didn't occur a moment ago, but
Airfoil still doesn't work at all. I am NOT
Thanks for your answer.
Somehow I only have a problem with shairtune as squeezelite keeps
playing for a long time on this player. A rpi0 zero wifi.
I just tried shairtunes again and what happens is that on my iPad the
connection to the player break and it is connected to the IPad. The
player
fraho wrote:
> I noticed that with the latest dev Version 0.72.6 native MacOS Airplay
> is working with a delay of about 20-30 seconds and with Airfoil it
> doesn't work no more at all. I've attached a screenshot of the Airfoil
> error message. However, it's working perfectly with iTunes. What a
I noticed that with the latest dev Version 0.72.6 native MacOS Airplay
is working with a delay of about 20-30 seconds and with Airfoil it
doesn't work no more at all. I've attached a screenshot of the Airfoil
error message.23489
sbp wrote:
> Hi I had good success using version 0.72.4 and 0.72.5 - but after
> upgrading to 0.72.6 it tend to randomly stop playing.
> If I then press play it resume playing.
>
I've not changed anything to that piece of the code.
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1
Hi I had good success using version 0.72.4 and 0.72.5 - but after
upgrading to 0.72.6 it tend to randomly stop playing.
If I then press play it resume playing.
The "extra debug log" from one of the stop:
Code:
[21:36:05.799533] http_thread_func:825 [0x1a3c2f8]: HTTP
here we go...23481
+---+
|Filename: server.log.zip |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=23481|
fraho wrote:
> No, nothing else. I tried it once more a moment ago, instead of
> "buffering" there was "connection" or "connecting" but the rest stays
> the same ("Shairtunes Title - Shairtunes Artist")
I need to know what URL the player is trying to grab, can you enable
these logging level to
philippe_44 wrote:
> There is nothing else, like the URL of the trick it tried to get?
No, nothing else. I tried it once more a moment ago, instead of
"buffering" there was "connection" or "connecting" but the rest stays
the same ("Shairtunes Title - Shairtunes Artist")
There is nothing else, like the URL of the trick it tried to get?
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000,
ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi
B3, B2, Pi B+,
philippe_44 wrote:
> Does the screen of the Boom say something?
Yes, it says "Buffering" and "Shairtunes Title - Shairtunes Artist". As
the AirAudio app is also capable transferring audio streams via DLNA I
tried that and it works with, at least with one Boom at the same time.
So that's some
fraho wrote:
> O.k., see attachments...2347523476
A very quick look at the log indicates that the Boom never queries the
audio data, or that such query is blocked by a firewall
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat,
fraho wrote:
> I could do that, but did you mix up AirFoil with AirAudio? AirFoil is
> working fine for me!
Probably. I mean, try the AirPlay controller that does not work with
AirCast or AirUPnP
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz
philippe_44 wrote:
> There is another thing you can do: if you happen to have a chromecast
> device or a upnp device, you can use one of these applications that I
> recently did https://github.com/philippe44/AirConnect/tree/master/bin.
> They share the same refactored-core to handle airplay but
philippe_44 wrote:
> Yes, except that this optional feature was super helpful to have a
> proper inter working between LMS and AirPlay. Without it, pausing is not
> working so well. But I did remove that (wait for sync) and it is
> obviously still not okay. Airfoil is doing something special as
Blue Fishey wrote:
> can i set the ip address to use in a config file somewhere ?
Version 0.72.6 should do the trick. It always uses the IF that LMS is
bound to as the brdocast address for mDNS services
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5,
can i set the ip address to use in a config file somewhere ?
Blue Fishey's Profile: http://forums.slimdevices.com/member.php?userid=15704
View this thread: http://forums.slimdevices.com/showthread.php?t=106289
arha
the server is also a V-host
C:\Users\pebble\Downloads>mdnssd-win.exe _raop._tcp.local
using interface 172.22.142.145
172.22.142.145 58433 HP-Mothership.local FF59B1A6B630@Chris's
Radio._raop._tcp.local
172.22.142.145 58438 HP-Mothership.local B3941FA11A96@Kitchen
Blue Fishey wrote:
> evning well it was working fine, but now nuffin
>
> I can see the helper running x5 for the 5 squezze boxs
>
> turned all the windows firewalls off, running on windows 10
>
> cant see the players on iphone 7 and our old ipad running way old ios
>
> tried to enable
fraho wrote:
> So if understand correctly you kept a feature in Shairtunes that
> actually was optional and now results in AirAudio not working anymore
> whereas native Apple Airplay and Airfoil "ignore" this feature? Isn't it
> possible to just remove the (not mandatory) feature? I have no
evning well it was working fine, but now nuffin
I can see the helper running x5 for the 5 squezze boxs
turned all the windows firewalls off, running on windows 10
cant see the players on iphone 7 and our old ipad running way old ios
tried to enable loggin but doesnt work
any other ideas ?
fraho wrote:
> So if understand correctly you kept a feature in Shairtunes that
> actually was optional and now results in AirAudio not working anymore
> whereas native Apple Airplay and Airfoil "ignore" this feature? Isn't it
> possible to just remove the (not mandatory) feature? I have no
philippe_44 wrote:
> Well unfortunately Apple does not officially publish their protocol, so
> lots of people have to guess how it works and sometimes what we think is
> mandatory is optional or vice-versa. With version of iOS, Apple has made
> some changes and typically decided to not use
fraho wrote:
> I've installed the dev version and tried that without success, still
> can't hear anything via the AirAudio app. It seems to be some kind of an
> unwritten law that something that used to work perfectly doesn't work
> anymore the other day. And then it's working again - until it
philippe_44 wrote:
>
> Long story short, when you uncheck "wait for sync", you'll have this
> pause/play then couple of seconds stop thing in LMS, but it should work,
> still
I've installed the dev version and tried that without success, still
can't hear anything via the AirAudio app. It seems
njr wrote:
> I'm pretty sure this means "Wait for synchro".
>
> I'm having a similar problem on iOS 10 myself and the description does
> seem like it might be related to my problem (which is not even
> consistent, but definitely happens with current iOS 10). Previously, I
> had frequent
fraho wrote:
> If that was an answer to my problem with the AirAudio app: Do you mean
> the latency settings? I've changed that to 2000ms which is also the
> value within the app. But it has no effect, I still can't hear anything
> at all
No, not the latency, in the dev repository there is a
This is the case where it happens, when you restart LMS multiple times.
That happens to me as well and I've not found so far a good solution for
that problem
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC,
philippe_44 wrote:
> This is the part of the helper that does the mDNS announce, not the part
> that handle audio. Normally, when a player is removed from an LMS
> server, this instances are stopped and I've verified that multiple
> times. There are a few cases, when LMS does not explicitly
philippe_44 wrote:
> I did not see this one, but I found the reason and I'll correct that
> soon, thanks for reporting it
Thanks, all settings is kept after a restart of LMS now with the newest
version 0.72.4.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
philippe_44 wrote:
> Change the sync option in the plugin settings
If that was an answer to my problem with the AirAudio app: Do you mean
the latency settings? I've changed that to 2000ms which is also the
value within the app. But it has no effect, I still can't hear anything
at all
Change the sync option in the plugin settings
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000,
ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi
B3, B2, Pi B+, 2xPi A+, Odroid-C1,
Patricia P wrote:
> Is 0.70.4 is current stable version of Shairtunes2?
>
> I have my LMS 7.9.1 on Windows 8.1 with a working instance of
> Shairtunes2. The PC is NUC5i3
>
> The two players which are visible to my Ipad as air devices, can be
> smoothly switched one to the other. It sounds good
Hi Philippe, I don't know since which version exactly: I can't hear no
sound out of my booms anymore when using the Android app "AirAudio"
which was working the last time maybe two weeks ago or so. With native
Apple Airplay via IOS or my Macbook and with Airfoil everything's fine.
I have the
sbp wrote:
> Hi I just noticed that even if I move a player from the LMS server where
> ShairTunes2W is running to another LMS-server without ShairTunes2W
> installed the plugin continue to run and it appear as a valid player on
> my iPAD. Off course I can't connect and play anything on the
sbp wrote:
> Hi Phillipe_44
>
> I noticed that if I change settings for ShairTunes2W not all of them
> will "stick" after a restart of LMS:
> Here is my shairtunes.prefs:
> So the "useFLAC" and "usesync" is changed. I also noticed "squeezelite"
> changes after a restart of LMS
>
> All the
Hi I just noticed that even if I move a player from the LMS server where
ShairTunes2W is running to another server without ShairTunes2W installed
the plugin continue to run and it appear as a player on my iPAD. Off
course I can't connect and play anything on the player.
This is a "top" command
Hi Phillipe_44
I noticed that if I change settings for ShairTunes2W not all of them
will "stick" after a restart of LMS:
Here is my shairtunes.prefs:
Code:
---
00:04:20:2a:d8:53: on
_ts_00:04:20:2a:d8:53: 1503074733
_ts_b8:27:eb:04:e5:28: 1502858704
philippe_44 wrote:
> Version 0.72.2 should work with flac and pcm. I'm doing a lot of code
> refactoring currently to support another project I've done
> (https://github.com/philippe44/AirConnect) so it had a few side effects
> - sorry about that
0.72.2 working great on LMS 7.91, Odroid XU4
Is 70.4 is current stable version of Shairtunes2?
I have my LMS 7.9.1 on Windows 8.1 with a working instance of
Shairtunes2. The PC is NUC5i3
The two players which are visible to my Ipad as air devices, can be
smoothly switched one to the other. It sounds good so I am not going to
update unless
alnames wrote:
> For what it's worth, I'm using picoreplayer 3.21 standard version with
> "use flac" with developer Shairtunes2W and the audio is fine.
Version 0.72.2 should work with flac and pcm. I'm doing a lot of code
refactoring currently to support another project I've done
philippe_44 wrote:
> Issue found - Set "use flac" option till I upload a correction
For what it's worth, I'm using picoreplayer 3.21 standard version with
"use flac" with developer Shairtunes2W and the audio is fine.
philippe_44 wrote:
> Issue found - Set "use flac" option till I upload a correction
Thanks, that is working.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
*Please 'donate'
sbp wrote:
> I have the same issue using LMS (7.9.1) on RPi3 with pCP (3.22 beta)
> AlloDAC Piano and latest testing Shairport.
> It shows up on iPAD and seems to be playing, but only very faint noise
> on playback.
Issue found - Set "use flac" option till I upload a correction
LMS 7.7, 7.8
gegen wrote:
> Same issue using LMS 7.91 on Odroid XU4 playing to Squeezelite on RPI 2
> with IQaudioDAC, players visible but just noise on playback. Reverted to
> stable version which plays fine.
I have the same issue using LMS (7.9.1) on RPi3 with pCP (3.22 beta)
AlloDAC Piano and latest
TroLoo wrote:
> I can confirm that after update to 0.72.1 plugin loads ok to LMS on
> piCorePlayer v3.21 Audio.
>
> But... it doesn't work. Airplay devices show up properly, but when
> streaming to them all I can hear is noise.
>
> Am I the only one to have this issue now? I can try to
TroLoo wrote:
> I can confirm that after update to 0.72.1 plugin loads ok to LMS on
> piCorePlayer v3.21 Audio.
>
> But... it doesn't work. Airplay devices show up properly, but when
> streaming to them all I can hear is noise.
>
> Am I the only one to have this issue now? I can try to
Nautilus wrote:
> Thanks! I'll look into those for sure. I think I did most of the steps
> already (as was explained on some post in this thread), but there were
> still some errors, with this list you provided I'm positive I can
> advance further :)
>
Yes! I can confirm this is working in an
philippe_44 wrote:
> I've found the issue, I'll do an update later today
I can confirm that after update to 0.72.1 plugin loads ok to LMS on
piCorePlayer v3.21 Audio.
But... it doesn't work. Airplay devices show up properly, but when
streaming to them all I can hear is noise.
Am I the only
alnames wrote:
> Noticed in the log after failing to install plugin (rather than failing
> to load):
>
> error: Can't chmod()
> /usr/local/slimserver/Cache/InstalledPlugins/Plugins/ShairTunes2W/AIRPLAY.pm:
> Operation not permitted
> at /usr/local/slimserver/Slim/Utils/PluginManager.pm line
Nautilus wrote:
> Ok, thanks, I think I need to let this one go...:) I have a Ts-259 Pro+
> and it does not support the container station so out of luck with that
> as well ;)
>
> Edit: Just saw your following posts. So there is hope after all :D Can
> you share some details on how you
scala wrote:
> It all seems to work fine!
> In fact, it works directly with automatic helper selection, which I did
> not expect in my QNAP case. I will experiment more and "stress" it for a
> few days and report, but I will be away for the weekend...
Bonjour Philippe, indeed I can confirm it
Nautilus wrote:
> *
> @scala* - maybe you missed the above :) Can you remember any details on
> how you were able to install the needed dependencies?
Hi! Most of the information you need is already available here
Nautilus wrote:
> Ok, thanks, I think I need to let this one go...:) I have a Ts-259 Pro+
> and it does not support the container station so out of luck with that
> as well ;)
>
> Edit: Just saw your following posts. So there is hope after all :D Can
> you share some details on how you
alnames wrote:
> Noticed in the log after failing to install plugin (rather than failing
> to load):
>
> error: Can't chmod()
> /usr/local/slimserver/Cache/InstalledPlugins/Plugins/ShairTunes2W/AIRPLAY.pm:
> Operation not permitted
> at /usr/local/slimserver/Slim/Utils/PluginManager.pm line
I see this in the log at startup
[17-08-14 09:50:13.6419] Slim::Utils::PluginManager::load (323) Error:
Couldn't load Plugins::ShairTunes2W::Plugin
[17-08-14 09:50:14.6793] Slim::Web::Cometd::handler (422)
errorNeedsClient: 00:04:20:22:54:31, status, -, 10, menu:menu,
useContextMenu:1,
Noticed in the log after failing to install plugin (rather than failing
to load):
error: Can't chmod()
/usr/local/slimserver/Cache/InstalledPlugins/Plugins/ShairTunes2W/AIRPLAY.pm:
Operation not permitted
at /usr/local/slimserver/Slim/Utils/PluginManager.pm line 854.
philippe_44 wrote:
> Looks good to me. The shairunes-xxx log only exist when playback starts,
> that the reason why you don't see any. Did you check the firewall status
> of your docker machine? It looks like its blocked
>
>
> Envoyé de mon iPad en utilisant Tapatalk
Thanks Philippe, I
alnames wrote:
> Interesting. There is a way to add picore extensions to the picoreplayer
> software and when I read your last replay, I attempted to load the
> openssl extension, but the software informed me that it was already
> installed. Maybe I did it before a long time ago and forgot about
SMC wrote:
> I can get Shairtunes working on a Windows machine in my home network but
> this is not in use normally. My main LMS install is in a Docker
> container running on a QNAP TS-251 and I have two errors which have been
> present with all versions of Shairtunes including v0.71.0:
> 1)
I can get Shairtunes working on a Windows machine in my home network but
this is not in use normally. My main LMS install is in a Docker
container running on a QNAP TS-251 and I have two errors which have been
present with all versions of Shairtunes including v0.71.0:
1) None of the players are
philippe_44 wrote:
> No but what I've done in 0.71.0 is to let user select which helper is
> used (in plugin settings), so that should do the trick
It all seems to work fine!
In fact, it works directly with automatic helper selection, which I did
not expect in my QNAP case. I will experiment
philippe_44 wrote:
> This is strange, here is why:
>
> The plugin needs some OpenSSL shared libraries. These are binary, not
> perl source, so there must be one per CPU architecture and per perl
> version. These are often not included with default perl or LMS. So, to
> avoid forcing user to
501 - 600 of 951 matches
Mail list logo
