What's wrong with me today - Matrox is here:
http://www.matrox.com/mga/archive_story/jul2002/parhelia_reeftech.cfm
* Tracking #: C9C447FEC5B96E47BAC09A4B698BFFA3A4164B8E
*
***
-- Original Message -
From: "Tony Karavidas" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Wednesday, July 17, 2002 2:17 PM
Subject: Re: [PEDA] Hardware questions (upgrade time - yuk!)
> That card looks impressive. The person who wrote t
> Do you know how the 200 NVS differs from the 550XGL card (both are
> Quadro4-based). There is no good (detailed) info on these cards
> capabilities - in particular the options for driving mix-and-match LCD+CRT,
> CRT+CRT, LCD+LCD is not well defined. I think the 550XGL is clear enough
> that i
mariusrf wrote:
> I'm using 2 17" LCD's at 1280x1024 each, with a dual head card. I wouldn't
> go back to a CRT . 17" LCd's can be had for little money now, paid $1000 for
> both months ago. All things considered, the 2 lcd's give me more viewing
> area for the money, more resolution , take less
> BTW the Mitsubishi 2040u is EOL'ed. The new one is 2060u. Any
> comments? This will cost me about $1900AUD - or about $1060USD on current
> exchange rates. How does that compare to street pricing in nth America?
The 2060u specs are almost identical to the 2040u. Probably just firmware
.
(Ian's question next, reply...)
Brian Guralnick
[EMAIL PROTECTED]
Voice (514) 624-4003
Fax (514) 624-3631
- Original Message -
From: <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Monday, July 15, 2002 11:16 AM
Subject: Re: [PEDA] H
And why is it that the STUPID 17 inch outdoor LCD screen at my local Wendy's
Drive thru has better contrast and color than the
indoor desktop LCD screens? Even when the temperature is -20 outside? (Though,
the pixel transition speed around scrolling text
begins to suffer dramatically.)
Your W
On 01:10 PM 13/07/2002 -0400, Brian Guralnick said:
>Step #1, video card:
>
> If you want dual head, & you want a perfect match, you will need to
> chose a video card where both video outputs are the same.
>If you have a digital flat panel interface, make sure both outputs are
>digital. Nev
al Message -
From: "Tony Karavidas" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Saturday, July 13, 2002 8:23 PM
Subject: Re: [PEDA] Hardware questions (upgrade time - yuk!)
> Careful, Brian might call your LCDs junk as he did mine a few mon
x27;t care.
The limited Photoshop and Illustrator work I do doesn't require very
accurate color.
TOny
> -Original Message-
> From: mariusrf [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, July 13, 2002 4:17 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Hardware
tion , take less desk space and are sharper
than crt's for the same resolution .
Matt Tudor, MSEE
http://www.gigahertzelectronics.com
- Original Message -
From: "Brian Guralnick" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Saturda
i will defer to Brian G on this except to comment that the G550 has one
VGA output and one DVI output
so assuming both monitors are analog the DVI output will need the crappy
convertor dongle and yes that does fuzz it up a bit
also as per Brian, the following is a GOOD THING:
when installing the
only realistic LCD solution:
http://www.cadalyst.com/reviews/hardware/0402lcd/dell.htm
Good luck...
Brian Guralnick
- Original Message -
From: "Ian Wilson" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Saturday, July 13, 2
tors coming up in the next letter...
Brian Guralnick
- Original Message -
From: "Ian Wilson" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Saturday, July 13, 2002 8:05 AM
Subject: [PEDA] Hardware questions (upgrade
--
From: "Ian Wilson" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Saturday, July 13, 2002 8:05 AM
Subject: [PEDA] Hardware questions (upgrade time - yuk!)
> Hello all,
>
> 2) Monitors - I need sharp sharp sharp -
Hello all,
I am looking for specific experiences on certain bits of hardware - throw
in you usual suggestions if you like but I am really interested in these
questions:
1) Dennis S. and others - did you ever sort out the Matrox G550 issue you
had? I know the G550 has pretty poor 3D performan
17 matches
Mail list logo