nks,
Larry
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
That's typically what I sell them for. I'm about out of UHF ones, but do
have a few VHF ones that I was planning to list there.
LJ
Original Message:
-
From: Chuck Kelsey [EMAIL PROTECTED]
Date: Fri, 31 Dec 2004 11:19:28 -0500
To: Repeater-Builder@yahoogroups.com
S
ed how
well it works.
LJ
Original Message:
-
From: Dakota Summerhawk [EMAIL PROTECTED]
Date: Thu, 30 Dec 2004 21:44:24 -0700
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Mobile Repeaters?
Portables are great but I need the 35W (UHF) and the 50W (VH
owner.
LJ
Original Message:
-
From: Chuck Kelsey [EMAIL PROTECTED]
Date: Fri, 31 Dec 2004 10:49:17 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Mobile Repeaters?
Consider yourself lucky. They usually got for much more than that.
Chuck
WB2EDV
Thanks, everyone - just what I needed.
Larry
Original Message:
-
From: KA9QJG [EMAIL PROTECTED]
Date: Wed, 29 Dec 2004 21:37:23 -0600
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Need S-COMM 5K Info
Bob Has all The Great info on His Site
http
n the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
o just to be a "Repeater Owner".
LJ
Original Message:
-----
From: JOHN MACKEY [EMAIL PROTECTED]
Date: Tue, 21 Dec 2004 11:12:06 -0600
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] HELP: 2 meter repeater intermod problem
frompager transmitters
Soun
Kinda like some of the modern little 4-cylinder cars with wings and coffee
can mufflers, trying to look and sound "fast!" (always trying to get me to
race when they pull up along side of my 'Vette)
LJ
Original Message:
-
From: skipp025 [EMAIL PROTECTED]
Date: T
in the
car and with my 10M Motorola HT-200 handie-talkie. I'll try a different
controller one of these days and have the Remote Base up again!
Larry K7LJ
Original Message:
-
From: Rogers, Ron [EMAIL PROTECTED]
Date: Tue, 7 Dec 2004 15:54:21 -0500
To: Repeater-Builder@yah
Kenwood
- Original Message -
From: "skipp025" <[EMAIL PROTECTED]>
To:
Sent: Friday, December 03, 2004 4:08 PM
Subject: [Repeater-Builder] tone trivia..?
>
>
> OK Smartie Pants...
>
> Who had "Quiet Tone"..?
>
> skipp
>
>
Wow - that's quite a frequency spread! Continuous duty?
LJ
Original Message:
-
From: Barry Thompson [EMAIL PROTECTED]
Date: Fri, 3 Dec 2004 13:49:47 -0800 (PST)
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MSR 2000 PA's 100 watt for uhf 400 - 5
I have a Motorola VHF MSF-5000 Repeater/Base station, with the test set,
RIB and RSS, and am looking for a Service manual for the Repeater.
Yes, I know they're available from Motorola.
Yes, I know they're sometimes on ebay, but none are listed right now.
Thanks,
Larry
[EMAIL
me up with some story, like a
local group some years ago, that "We can't get a MICOR PL Decoder to work
at this site". Or "this repeater isn't for us, it's for the DX stations -
they really depend on it!"
What a mess.
Original Message:
-----
Fro
them.
LJ
Original Message:
-
From: Mike WA6ILQ [EMAIL PROTECTED]
Date: Thu, 02 Dec 2004 00:46:50 -0800
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Wanted! Motorola Mitrek (Lo-Band)Manual
#6881039E70
At 10:25 AM 12/1/04, you wrote:
>I want a Mit
Some, yes. A few, yes. Many, No.
LJ
Original Message:
-
From: Mark Holman [EMAIL PROTECTED]
Date: Wed, 1 Dec 2004 21:41:50 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] ten meter repeater setups
I thought on 10 M. that some are tone access ?
I
ssage:
-
From: Jim B. [EMAIL PROTECTED]
Date: Wed, 01 Dec 2004 14:51:20 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] ten meter repeater setups
Matt wrote:
>
> Its low in the cycle right now for sure. When things are good on 10m
there's
> a new p
er in nearly every little jerkwater
town = a Real mess!
LJ
Original Message:
-
From: Jim B. [EMAIL PROTECTED]
Date: Wed, 01 Dec 2004 14:48:46 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] ten meter repeater setups
[EMAIL PROTECTED] wrote:
>
e's a good place for a low-band repeater system. Lots
more channels available.
Larry
Original Message:
-
From: jhoonbee [EMAIL PROTECTED]
Date: Tue, 30 Nov 2004 06:17:19 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] ten meter repeater setups
He
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
ffers at Best Buy stores.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
-----
From: Mike WA6ILQ [EMAIL PROTECTED]
Date: Thu, 18 Nov 2004 16:10:39 -0800
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Micor Units
At 03:59 PM 11/18/04, you wrote:
>Hello All,
>
>I just inherited a Micor receiver, transmitter and two powersupp
lder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
t;*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
I just took the door off of the Sinclair Duplexer cabinet and measured the
cavities length - they're 24" long.
LJ
Original Message:
-
From: Q [EMAIL PROTECTED]
Date: Sun, 31 Oct 2004 11:39:34 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] H
I'll open up the cabinet this weekend and measure them. I may try to tune
it up on 2-Meters this weekend.
LJ
Original Message:
-
From: Q [EMAIL PROTECTED]
Date: Sun, 31 Oct 2004 11:39:34 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Help n
/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Sorry, folks - I don't know how a different message than the one I was
replying to wound up on this message. It's not the one I replied to! I'm
also getting some duplicate messages on this list.
LJ
Original Message:
-----
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
Da
The duplexer is $550 plus shipping. The rods haven't been cut short, I can
send a .jpg picture via email (later this weekend after I get home and
after the CQWW DX Contest).
LJ
Original Message:
-
From: valleyforge2002 [EMAIL PROTECTED]
Date: Fri, 29 Oct 2004 09:21:11 -00
needs. Contact me off the list if you're interested.
Larry
[EMAIL PROTECTED]
Original Message:
-
From: Q [EMAIL PROTECTED]
Date: Fri, 29 Oct 2004 01:17:56 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Help needed
Also,the words"2mete
Nope, not even close. The MICOR uses a flat metering connector, the MITREK
a round one, like for a MOTRAC/MOTRAN, etc.
LJ
Original Message:
-
From: Neil McKie [EMAIL PROTECTED]
Date: Thu, 21 Oct 2004 12:02:38 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
smit
power, etc. Make sure you have the service manual.
LJ
Original Message:
-
From: Kevin Bednar [EMAIL PROTECTED]
Date: Wed, 20 Oct 2004 18:32:47 -0400
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MSR2000 Question
Anyone know what mods, if any, are needed to b
Worked fine here, too.
LJ
Original Message:
-
From: Coy Hilton [EMAIL PROTECTED]
Date: Tue, 19 Oct 2004 00:24:29 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Clear Speech Speaker
GEE NEIL, It worked okay for me.
73
--- In Repeater-Builder
sign up today!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
I would assume that any winter time servicing of radio equipment/antennas
requires a helicopter for transport, and some big shovels to dig down to a
building entrance door.
Great picture!
LJ
Original Message:
-
From: John W Anderson [EMAIL PROTECTED]
Date: Sat, 2 Oct 2004 23
nnis/W4TCL
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send a
-
From: Mr John Lloyd [EMAIL PROTECTED]
Date: Mon, 20 Sep 2004 21:33:56 -0700 (PDT)
To: [EMAIL PROTECTED], repeater-builder@yahoogroups.com
Subject: [Repeater-Builder] New Sinclair 2M Antenna Question
It sounds like you have a SRL229 antenna. That extra
cable in the mounting tube
--
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Original Message:
-
From: Ken Arck [EMAIL PROTECTED]
Date: Sun, 19 Sep 2004 16:50:29 -0700
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Kinda of a strange question
Hi folks
Is anyone aware of the earliest use of a synthesized remote base on an
amateur repeater
/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
J
Original Message:
-
From: Mike WA6ILQ [EMAIL PROTECTED]
Date: Tue, 14 Sep 2004 20:32:20 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Voters
At 05:13 PM 9/14/04, you wrote:
>A while back, there was some discussion on voters. I have read through all
>of th
FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Yo
Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
uno.com to sign up today!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
re exactly 100 KHz apart.
Anyone know if the Motorola T1507 duplexer (four - pass only cavity
configuration) can be configured to do the job? If so, any recommendations
for cable lengths, etc?
Larry
Original Message:
-
From: lcradio2002 [EMAIL PROTECTED]
Date: Tue, 03 Aug 200
up today!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
is $35 plus postage.
Larry
Original Message:
-----
From: [EMAIL PROTECTED]
Date: Mon, 26 Jul 2004 14:24:06 -0700
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Need VHF LPF for Circulator
I'm looking for a VHF Low Pass Filter that goes on the output of a s
peater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
alone and took what I could get out of it (about 90 watts).
LJ
Original Message:
-
From: Kevin Bednar [EMAIL PROTECTED]
Date: Tue, 20 Jul 2004 22:25:57 -0400
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Micor low band base
Very good Kev. I kind of figur
peedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
I'd like the info, too - especially if someone has modified the 250 Watt
MICOR PA Deck to go down to the 145 MHz range.
LJ
Original Message:
-
From: Frank R. Vondra [EMAIL PROTECTED]
Date: Sat, 17 Jul 2004 18:32:41 -
To: Repeater-Builder@yahoogroups.com
Subject: [Rep
nt to
have to go through a bunch of modifications to one if I really didn't have
to. Hopefully one will turn up!
Thanks,
LJ
Original Message:
-
From: Joe Montierth [EMAIL PROTECTED]
Date: Tue, 8 Jun 2004 22:26:02 -0700 (PDT)
To: Repeater-Builder@yahoogroups.com
Subject: Re:
visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
ts inside.
Thanks,
Larry
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROT
wn (or big City) does NOT need a
10-Meter Repeater! It's not just another band needing "filling up" because
Repeaters are authorized there.
LJ
Original Message:
-
From: russ [EMAIL PROTECTED]
Date: Sun, 6 Jun 2004 16:56:04 -0400
To: Repeater-Builder@yahoogroups.co
LJ
Original Message:
-
From: Charles Miller [EMAIL PROTECTED]
Date: Fri, 4 Jun 2004 20:56:48 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] MSF 5000
They make very good repeaters. If the one you have is close enough to the
HAM band then you can move it without ve
ed with anything.
So if anyone has another set besides the one David needs, I could sure use
one, too. It will finish up another UHF Repeater - everything else works
fine.
LJ
Original Message:
-----
From: David [EMAIL PROTECTED]
Date: Thu, 3 Jun 2004 21:41:39 -0400
To: Repeater-Bui
Original Message:
-
From: Jim B. [EMAIL PROTECTED]
Date: Thu, 03 Jun 2004 10:12:51 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] buillding a repeater
[EMAIL PROTECTED] wrote:
> There was a factory forced air ass'y for MICOR repeaters? (ot
Kenwood radios for 2M, 220, 440 and
1200 MHz.
Larry K7LJ
Original Message:
-
From: Kevin Custer [EMAIL PROTECTED]
Date: Wed, 02 Jun 2004 22:21:49 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] SQ-1000 vs RLC-MOT Squelch
Hi,
The Link Comm unit is m
Neil McKie [EMAIL PROTECTED]
Date: Wed, 02 Jun 2004 20:06:30 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] buillding a repeater
I agree about collecting Micor parts ... goes for GE-cor (Ok, Mastr
II) too. The manufacturers haven't been supporting those radios i
Huh??
Original Message:
-
From: Coy Hilton [EMAIL PROTECTED]
Date: Tue, 01 Jun 2004 02:26:08 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Wacom WP-641, correction on its specs...
The Duplexer will provide a specified amount of isolation. It has
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
avity ones for almost giveaway prices (and sometimes they are actually
giving them away).
LJ
Original Message:
-
From: Ron Stordahl N5IN [EMAIL PROTECTED]
Date: Sun, 30 May 2004 17:37:45 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Wacom WP-641, correcti
eb, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
just
easier and faster to have someone just send me a check in the first place.
But if all you have is Paypal, we can use that.
Thanks,
Larry Johnson
10036 SW 50th Ave.
Portland, OR 97219-5813
[EMAIL PROTECTED]
Original Message:
-
From: Bernie F. Treat [EMAIL PROTECTED]
Date: Sun,
Got some on the way now, thanks to everyone for their help!
Larry
Original Message:
-
From: skipp025 [EMAIL PROTECTED]
Date: Mon, 24 May 2004 22:53:47 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Looking for GE MVP Tone Element - 100.0 Hz
Larry
io CG Board - I have
lots of those, but none for 100 Hz.
Larry
[EMAIL PROTECTED]
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the web, go to:
If you haven't already found the info, let me know and I can arrange to
have a copy made of my ID-1A Manual at a local copy place. I also have a
couple of these ID'ers that I'll be selling at some ham swap meets.
Larry
Original Message:
-
From: lbosard [EMAIL PROTE
! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
t your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
I'm serious - really. I'm not that clever to have come up with something
like that - it sure surprised me the first time I heard it.
LJ
Original Message:
-
From: Fred Flowers [EMAIL PROTECTED]
Date: Sat, 22 May 2004 22:43:27 -0500
To: Repeater-Builder@yahoogroups.c
Or talking to some of the folks in 2-way radios shops down in the South
(dubya fower land) that call them "MASS STAR TWO" series radios.
LJ
Original Message:
-
From: mch [EMAIL PROTECTED]
Date: Sat, 22 May 2004 13:16:48 -0400
To: Repeater-Builder@yahoogroups.com
S
Kinda like the notations I often see for the Motorola "Syntor XX".
(one "X" too many").
LJ
Original Message:
-----
From: mch [EMAIL PROTECTED]
Date: Sat, 22 May 2004 13:16:48 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] GE Mastr
y Repeater,
but necessary cables and connectors are no longer available from ICOM.
Good Luck!
LJ
Original Message:
-
From: Eric Struble [EMAIL PROTECTED]
Date: Thu, 20 May 2004 09:40:08 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Icom IC-RP
It was the same weekend it's always been since they moved it to mid May:
2004 - May 14, 15, 16
2003 - May 16, 17, 18
2002 - May 17, 18, 19
- Original Message -
From: "Dave Schmidt" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, May 18, 2004 3:47 PM
Subject: Re: [[Rep
shipping from
Alabama.
Email [EMAIL PROTECTED]
Thanks to Kevin for the bandwidth.
Dennis/W4TCL
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the w
Found some, thanks. I will probably try to pick up a few more at Dayton
next weekend.
LJ
Original Message:
-
From: robert c ehrhorn [EMAIL PROTECTED]
Date: Thu, 6 May 2004 22:19:18 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WTB: KXN1052A MICOR UHF
or a conversion that we can all use to free up the transmit power
that's already there.
Thanks again,
Larry
Original Message:
-
From: Eric Lemmon [EMAIL PROTECTED]
Date: Thu, 06 May 2004 18:00:10 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re:
--
From: Eric Lemmon [EMAIL PROTECTED]
Date: Wed, 05 May 2004 17:19:59 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Help Needed with UHF Micor PA TLE1713A
Brian,
I, too, have a 2-watt UHF Micor repeater (it was used on an oil
platform) which is essentially a
d
TLE1712A versions).
I also need one or two more KXN1052A UHF MICOR Transmit channel elements.
Larry
Original Message:
-
From: johnmichaelwelton [EMAIL PROTECTED]
Date: Sun, 02 May 2004 01:39:19 -
To: [EMAIL PROTECTED]
Subject: [Micor] Micor PA
Is there a way to use
problem with the can itself or with the
loop/probe elements? Swapped any cables?
Larry K7LJ
Original Message:
-
From: Eric Lemmon [EMAIL PROTECTED]
Date: Sat, 01 May 2004 21:26:29 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] T1504 cavity
Ken,
You
Found several, but could use one or two more. Fortunately, Dayton is soon.
Thanks,
LJ
Original Message:
-
From: robert c ehrhorn [EMAIL PROTECTED]
Date: Thu, 29 Apr 2004 18:22:52 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WTB: KXN1052A MICOR UHF
re receiver and
exciter.
Larry K7LJ
Original Message:
-
From: n9wys [EMAIL PROTECTED]
Date: Mon, 19 Apr 2004 23:41:48 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF MSR2000 tuned down to 440 MHz
Our repeater is an MSR2000 UHF model, Model # C74GBS
Marv - the KLN6210A reeds that I have several each of are:
146.2, 156.7 and 162.2 Hz. I have at least six of each tone.
Larry
Original Message:
-
From: Marvin Hoffman [EMAIL PROTECTED]
Date: Sun, 18 Apr 2004 18:59:32 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re
ame
up one short. Just too impatient to wait until Dayton next month!
Larry
Original Message:
-
From: Maire Company [EMAIL PROTECTED]
Date: Mon, 19 Apr 2004 18:10:02 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WTB: KXN1052A MICOR UHF Transmit Chann
go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Marv - found some here but could use a couple more. Is it KLN6210A reeds
that you're wanting to know which ones I have for trade?
Thanks
Larry
Original Message:
-
From: Marvin Hoffman [EMAIL PROTECTED]
Date: Sat, 17 Apr 2004 15:51:00 -0400
To: Repeater-Builder@yahoogroup
I just came up with an extra station control board, too, so I plan to
modify mine as per Kevin's article.
Larry K7LJ
Original Message:
-
From: Jim Cicirello [EMAIL PROTECTED]
Date: Sun, 18 Apr 2004 15:33:17 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Bu
your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Plenty of Repeaters, but lots fewer users. Most repeaters are quiet
compared to just a few years ago. Take a listen on 2-Meters - Los Angeles,
Seattle, Boston, D.C., Chicago, San Francisco, Denver, Dallas. Anywhere.
LJ
Original Message:
-
From: Jim B. [EMAIL PROTECTED]
Date: Fri
Original Message:
-
From: skipp025 [EMAIL PROTECTED]
Date: Thu, 08 Apr 2004 21:43:42 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] nz9e audio preamp with AGC diagram? Feb 95 QST
Has anyone got a copy of the diagram for the nz9e
audio preamp with AGC diagram?
be reasonable expected, and more,
for not only Eric, but others who have purchased the RC-210. No flames,
just stating facts as we look at them.
Dennis W4TCL and Sonny WD4LPG
Original Message:
-
From: Ken Arck [EMAIL PROTECTED]
Date: Wed, 07 Apr 2004 08:02:51 -0700
To: Repeater
Someday. I hope you
have better luck with your units.
LJ
Original Message:
-----
From: Tom [EMAIL PROTECTED]
Date: Fri, 02 Apr 2004 02:28:00 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] ACC FC900
Does anyone have one in operation now?
Please email me if y
Me too...
LJ
Original Message:
-
From: Micheal Salem [EMAIL PROTECTED]
Date: Tue, 30 Mar 2004 12:11:22 -0600
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Duplexer Cable Legnth
Hi Kevin:
I get a 404 error when I tried to download the Wacom PDF document
rs.
K7LJ
Original Message:
-
From: Steve Bosshard [EMAIL PROTECTED]
Date: Tue, 23 Mar 2004 13:16:01 -0600
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Re: [Re: [Repeater-Builder] Motorola Motrac Radio]]
Did a search on google "solid state replacement" tubes and S
Wanted: TRN 6006A MICOR Audio/Squelch Board for a MICOR Repeater.
Larry
[EMAIL PROTECTED]
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
<*> To visit your group on the web,
Found this site too:
http://www.amalgamate2000.com/radio-hobbies/radio/coaxial_resonators.htm
- Original Message -
From: "David Schornak" <[EMAIL PROTECTED]>
To:
Sent: Monday, March 15, 2004 4:25 PM
Subject: [Repeater-Builder] duplexers
has anyone or does anyone k
/~g4kqu/gb3dx_photos.htm
- Original Message -
From: "David Schornak" <[EMAIL PROTECTED]>
To:
Sent: Monday, March 15, 2004 4:25 PM
Subject: [Repeater-Builder] duplexers
has anyone or does anyone know where tofind the math formulas to help you
design a set of cavities f
201 - 300 of 323 matches
Mail list logo