Hello,
Haven't used GPG with TB since v8.X, just tried on v9 and it seems like TB! is
not calling Pinentry properly if user's key is on a card.
```
gpg: using "and...@savchenko.net" as default secret key for signing
gpg: signing failed: Bad PIN
gpg: [stdin]: clear-sign failed: Bad PIN
```
The
Hello,
While trying to make sense of the appalling connection success rate in
v9.2.3.0, I have looked at the TLS session and observed the following:
1. After receiving ACK, TB! starts ClientHello advertising support of 26
different cipher suits. Some of them look questionably at best and
Hello,
Seeing that lately TB! gets stuck on receiving mail more often than it
actually manages to complete the transaction, I have decided to try it via
IMAP.
Surprisingly, I can't quite figure out how to do it... Any hints?
In account properties, under the "Transport" tab I can change the
Hello Stefan & All,
Is it possible (...or would it be possible...) to increase verbosity in TB's
log? Client often gets stuck while trying to establish TLS v1.2 connection.
Thanks.
--
v9.2.3.0 x64 on Windows 10 18363
Current version is 9.1.18
Hello,
1. Select an e-mail in "Sent" folder that is reply to a letter stored _not_
under the main "Inbox" folder.
2. Use either an option in the right-click menu or hit +
3. TheBat! crashes instantly without producing an error message / etc.
POP3 account, OTFP (on-the-fly-encrypted) mail
Hello Stefan,
Sunday, August 2, 2020, 4:44:13 AM, you wrote:
> Actually, you can adjust it in the preferences - Viewer/Editor -
> Header fields - To/CC/BCC - Complete automatically...
My goal is not to disable autocomplete, but to avoid user input being
automatically over-written by the
Steps to reproduce:
1. Select a sent message
2. Use "edit as new"
3. Start adjusting "To" field with an address that is similar to one
present in an address book
4. TB silently replaces your edit with one from the address book
Work-around: type address in a text editor and paste into TB
Hello,
Subj. Steps to reproduce
1. Create main toolbar layout as on the screenshot #1
2. Observe the result as on the screenshot #2
3. Restart TheBat!
4. Observe "new" tooldbar layout as on the screenshots #3 and #4
Mantis link: https://bt.ritlabs.com/view.php?id=2063
P.S. Please do not
Hello,
Clicking the subj. button does nothing.
Could someone confirm before I fill the bug report?
--
v9.2.2.1 (BETA) x64 on Windows 10 18363
Current version is 9.1.18 | 'Using TBUDL' information:
Hello,
Thursday, July 16, 2020, 10:03:24 PM, I wrote:
> After this week's "patch Tuesday", v9.2.2 silently crashes upon launch.
Fixed by:
1. Launching v9.2.X voyager and running it under WinDbg to catch the
moment it crashes during import
2. Removing virtual folder which appeared to be a
Hello Stefan,
Thursday, July 16, 2020, 3:41:51 AM, you wrote:
> most of the problems were fixed for sure as I was experiencing them
> before the release and do not see them after the release.
That's a well-substantiated statement. To quote MFPA who has sent this
using v9.2.2:
> My
Hello,
Just wondering if any fellow TBUDL members have switched and/or using
Thunderbird in parallel. Any best practises to share?
Thinking of exporting each folder as *.mbox, re-importing them all in
Thunderbird and be done with the daily bugs plaguing the e-mail client.
--
With regards,
A
Hello,
After resurrecting TB! by reverting back to v9.1.X I have noticed it
has started re-downloading all e-mails again. This is a well-known bug
and affects number of people at random. You can find more details at
https://bt.ritlabs.com/view.php?id=1779.
After logging into the Webmail
Hello,
After this week's "patch Tuesday", v9.2.2 silently crashes upon launch.
Reverted back to v9.1.16 as it seems to work... Minus the toolbars that
are traditionally broken.
Any confirmations? Created support ticket #87841, feel free to quote.
--
v9.1.16 x64 on Windows 10 18363
Hello Susanne,
Wednesday, July 15, 2020, 5:38:02 AM, you wrote:
> Is the toolbar customization problem fixed?
No.
--
Regards,
A
Current version is 9.1.18 | 'Using TBUDL' information:
http://www.silverstones.com/thebat/TBUDLInfo.html
Hello,
If you are running v9.2.2.0, could you please try to create a custom
folder and add some actions to it? I have tried a few times and observe
the following:
1. Folder is not visible on toolbar even with the icon assigned
2. Actions can't be added under the folder
Screenshot attached.
Hello Thomas,
Monday, July 13, 2020, 10:16:21 AM, you wrote:
> Known bug, it happens rarely vbut does happen:
Can confirm, has happened to me twice during the past week.
--
Regards,
A
Current version is 9.1.18 | 'Using TBUDL' information:
Hello MFPA,
Thursday, July 9, 2020, 5:55:06 AM, you wrote:
> I find that in v 9.2.1 my menu customisation is lost each time I
> restart TB!.
Same. Hence I have reverted back to the DevExpress builds.
--
Regards,
A
Current version is 9.1.18 |
Hello Stefan,
Saturday, July 4, 2020, 9:24:49 PM, you wrote:
> Use Ctrl+Shift+ Plus to expand all threads and Ctrl+Shift+Minus to
> collapse all threads, Asterisk toggles the expanded state of all threads.
Thanks, this works. It also collapses date-based threading though,
perhaps the latter
Hello,
Surely there is a button to collapse all threads... Somewhere. I have
used "menu navigator", but so far was unable to find one. Any hints?
--
v9.1.18.3 (BETA) x64 on Windows 10 18363
Current version is 9.1.18 | 'Using TBUDL'
Hello,
Subj. says it all.
I remember this being an issue some time ago during the transition to
DevExpress widgets... Solution was to launch TB! with a certain
parameter, decrypt user settings file and nuke a set of relevant lines.
...Does anyone have this recipe handy?..
--
v9.2.1.0 x64 on
Hello Thomas,
Sunday, June 21, 2020, 12:43:06 PM, you wrote:
> Mine is set to 10 characters (so your example above is not
> highlighted), but you set it to any value that makes sense to you.
Works. Shouldn't there be a more robust detection of the reply symbol?
Currently TheBat seems to use:
Hello,
This string of text is incorrectly highlighted as reply:
```
X.X. Some text ">" that must not be highlighted as the reply...
```
Before I create bug report, could someone please confirm?
Screenshot attached.
--
v9.1.18 x64 on Windows 10
Hello Jack,
Sunday, June 21, 2020, 8:21:34 AM, you wrote:
> Using TB! 6.0.12
> OS: Win 10 v6 Build: 9200
Are these versions correct?..
--
Regards,
A
Current version is 9.1.18 | 'Using TBUDL' information:
Hello,
Is there a way to set preferred message view on per-folder basis?
Say mailing lists and some others would default to text and news will
default to HTML.
--
v9.1.18 x64 on Windows 10 18363
Current version is 9.1.18 | 'Using TBUDL'
Hello,
Is there a way to delete attachments from a bunch of messages?
I have checked the "actions", but can't find anything suitable.
--
v9.1.18 x64 on Windows 10 18363
Current version is 9.1.18 | 'Using TBUDL' information:
Hello MFPA,
Wednesday, May 20, 2020, 7:41:55 AM, you wrote:
> Type in the "from" field of the message editor.
As indicated in the 1st message, this is what I do now.
> One way is to set up "accounts" in The Bat! for the most-used sending
> addresses.
Appreciate the idea, but the 1st sentence
Hello,
How can I change "From" field under a single account?
Picture this:
1. Several domains are pointing to a single MX/MTA
2. I receive and send e-mails for/from using the MX in question
Currently, when in need to send an e-mail from postmaster@, I have to
change "From" field in the "Edit
Hello MFPA,
Sunday, May 17, 2020, 11:22:49 PM, you wrote:
> I was thinking of the macros you use in message templates, etc.
Excuse me, how is this relevant to the question asked?
> Try an internet search for: regex "number greater than"
Have tried. I am mostly used to PCRE which is (AFAIK!)
Hello MFPA,
Saturday, May 16, 2020, 2:52:29 AM, you wrote:
> If you mean the value of a specific header field is greater or smaller
> than "X", maybe the %IF or %IFN macro?
Could you please clarify? Would you use it via "matches all as RegExp"
selector?
Screenshot attached (hopefully will
Hello Jack,
Friday, May 15, 2020, 12:07:31 AM, you wrote:
> There was no attachment.
Here we go, 2Kb file: https://i.imgur.com/6BtdEB5.png
Marck, could you please check on your (aka server's) end?
--
Regards,
A
Current version is 9.1.18 |
Hello,
Is there a way to test if header field is greater or smaller than "X"?
Attaching screenshot of the current "solution" which is obviously
non-optimal and tedious to maintain if the range of values is large.
--
Cheers,
A
Current version
Hello MAU,
Monday, May 11, 2020, 8:52:27 PM, you wrote:
> ,- [ Here you are ]
> | Content-Type: text/html; charset=utf-8
> | Content-Transfer-Encoding: quoted-printable
> `-
...and which macros is that? :)
--
Regards,
A
Current
Hello Marck,
Monday, May 11, 2020, 8:53:20 PM, you wrote:
> There are 2 more QTs you need to complete the set for this to work
> properly.
Thanks, done. I wonder how you include it, on folder or account level? I
have tested as the reply template for a folder - works fine now.
Have to
Hello Marck,
Monday, May 11, 2020, 8:08:00 PM, you wrote:
> ,--/ Initials \--
Getting there! Surprisingly, it returns ">Cfa" for all senders. Is this
a normal PCRE?
Before I dig into it, is there a syntax highlighting for TB macros
available? VIM, Notepad++, etc...
Lastly, from a
Hello Marck,
Monday, May 11, 2020, 7:47:40 PM, you wrote:
> ,--/ I use this very mature example \--
Not bad! Unfortunately does not work on HTML and returns
```
Cannot find a quick template "Initials"
```
P.S. After using this Macro, TheBat! decided to re-download all mail.
Bizarre.
Hello,
How do *you* automatically detect and remove "greetings line" when
replying to a message?
I would think of %SETPATTREGEXP manipulation, but surely there are some
ready-made recipes out there.
--
Cheers,
A
Current version is 9.1.18 |
Hello MFPA,
Sunday, May 10, 2020, 9:49:05 PM, you wrote:
> Would that lead to more help for ordinary users' TB! issues? Or would
> their messages simply get lost among all the beta testers' messages?
> It would certainly be massively increased traffic compared to the
> current TBUDL, and most
Hello Gunivortus,
Sunday, May 10, 2020, 5:16:43 PM, you wrote:
> I don't have that option between 'Reply to All' and 'Forward'.
I wonder why... Perhaps try messaging RitLabs support directly?
It is available by default.
--
Regards,
A
Current
Hello All,
It is 2020 out there and TB mailing lists seem to be a little outdated.
Screenshots being stripped from the messages unless it all fits in 25Kb,
famous "Current version is 8.0.18 | 'Using TBUDL' information" footer
attached to all messages... Perhaps it is time for a maintenance?
Hello Thomas,
Sunday, May 10, 2020, 11:27:45 AM, you wrote:
> Your contect menu is different from mine. What viwer/editor do you
> use? I use MicroEd.
MicroEd, v9.1.18. No changes made to the menu on my side.
--
Regards,
A
Current version is
Hello MAU,
Sunday, May 10, 2020, 6:07:47 AM, you wrote:
> Sorry, no attachment. Can you upload the screenshot to
> http://www.canyonero.com/ and send the link? thanks a lot.
Here we go: https://i.imgur.com/YoFRdGV.png
--
Regards,
A
Hello Miguel,
Saturday, May 9, 2020, 5:45:04 PM, you wrote:
> Excuse my ignorance and/or blindness. Where can I find that option?
Please refer to the screenshot attached.
--
Regards,
A
Current version is 8.0.18 | 'Using TBUDL' information:
Hello Susanne,
Monday, May 4, 2020, 8:18:02 AM, you wrote:
> If there are both html and text available, it doesn't work in text view.
I have tried the same action here and it works. Perhaps try on another
message to be sure? Also, are you using v9.1.18?
> By the way, is there a short cut for
Hello Susanne,
Monday, May 4, 2020, 2:55:41 AM, you wrote:
> Sorry, it's actually the exact opposite.
> Works in Html view, but not in Text.
Just tried using v9.1.18, works fine.
Check that you are not using regular "reply using selected text as the
quote" function, one that is on F4 by
Hello Susanne,
Sunday, April 19, 2020, 12:35:49 AM, you wrote:
> Thanks for checking!
> I just discovered that I can reach the site on my phone, when not using my
> home network.
> Deleting cookies, restarting pc, and turning off virus protection have not
> helped.
> Very strange. Will have to
Hello Susanne,
Sunday, April 19, 2020, 12:22:04 AM, you wrote:
> since yesterday, I haven't been able to access the Ritlabs site.
> Tried 2 different browsers.
>
> Is anyone else having this problem?
Seems to be up:
> $ http --headers https://www.ritlabs.com | head -1
> HTTP/1.1 302
Hello Thomas,
Thursday, April 16, 2020, 7:54:41 PM, you wrote:
> This is getting off-topic. Anyway, I am not a beta tester for Windows,
> and the update is automatic. I am not following the Win10 version
> numbers and never had a desire to go back to any beta version before
> the release version
Hello Thomas,
Thursday, April 16, 2020, 10:40:58 AM, you wrote:
> There is never a reason for someone who is not a beta tester to
> download any beta version.
> Once the release version is out, there is no need to revert back to a
> beta version.
Those are rather broad statements.
> Message
Hello Thomas,
Tuesday, April 14, 2020, 7:57:55 PM, you wrote:
> Good to hear. Don't download from unauthrotised sites.
Generally good advice, however in this case it would be prudent to
actually look at the content.
> Here are the release versions:
>
Hello Luca,
Tuesday, April 14, 2020, 7:50:31 PM, you wrote:
> It won't work! A new 8.x release should be issued to solve the problem. I
> cannot see any on the beta list.
Ah, that was a thread re. TLS issues. Pardon.
--
Regards,
A
Current
Hello Paul,
Saturday, April 11, 2020, 9:08:37 PM, you wrote:
> It is a "where is the horse" issue.
Precisely.
--
Regards,
A
Current version is 8.0.18 | 'Using TBUDL' information:
http://www.silverstones.com/thebat/TBUDLInfo.html
Hello Thomas,
Saturday, April 11, 2020, 8:35:35 PM, you wrote:
> There are newer betas... ;-)
of v8? Please share.
--
Regards,
A
Current version is 8.0.18 | 'Using TBUDL' information:
http://www.silverstones.com/thebat/TBUDLInfo.html
Hello Thomas,
Saturday, April 11, 2020, 1:58:28 PM, you wrote:
> Why would you want to download an old beta version?
Because newer "release" version is not production ready. Check all the
complains about UI in v9 branch posted to this list in the past weeks.
--
Regards,
A
Hello Thomas,
Saturday, April 11, 2020, 1:19:35 PM, you wrote:
> May I suggest to not download beta versions from any unauthorised
> sites. If you want to use beta versions, please become a member of the
> TBBETA discussion group and downlaod the official betas from the
> Ritlabs website only.
Hello,
Under "features" section, RitLabs claims:
> The Bat! uses Windows Address Space Layout Randomization (ASLR) and
> Data Execution Prevention (DEP) to protect your computer from viruses
> and malware spread via email.
However, looking at executable, it sits at the default image address
Hello All,
Friday, April 10, 2020, 12:13:02 AM, I wrote:
> [2] Column width is constantly changing when switching between folders
> that share the same "View Mode". I have no logical explanation here.
Possible workarounds, either:
A) Create new viewing mode for each folder
Hello Paul,
Friday, April 10, 2020, 7:43:01 AM, you wrote:
>>> I'm comfy with the late v.8, I would appreciate very much if I could
>>> downgrade
>>> and keep on with that while v.9 grows mature.
S>> I wholeheartedly agree!
S>> The customization, where even available, doesn't stick. It reverts
Hello,
I am fighting the battle with the quirks of TheBat! interface and it
seems like I am not exactly winning here.
The interface is not adaptive and riddled with tiny annoying glitches
that get on your nerves daily. I am aware of the "switch to summary view"
option, that is not it.
If I
Hello,
If someone is running TheBat! with master password enabled, could you
please check:
1. $MAILDIR/UserDics contains *.udc files with unencrypted user
dictionaries (words added to the dict.)
2. $MAILDIR location and username in .TBK backup are stored in
cleartext. Try `string *.TBK* |
Hello Christopher,
Saturday, March 28, 2020, 11:33:06 AM, you wrote:
> I've never used it, nor do I know if The Bat! can use this mode let
> alone it's compatibility with other email clients.
Possible with clients that support easy(ish) passing of key-data
handling to pinentry.
Also, I should
Hello Christopher,
Thank you for the well-constructed and informative message, I just
wanted to add one small point to the below:
>> What I would like to be able to do is send password-protected
>> messages that can only be opened by the receiving party who has the
>> password. Is that what this
Hello,
Where can I change things like a font declaration in HTML message and
CSS styling of reply (by default - with #ff border) ?
I am aware of Account Properties --> Templates and Viewer templates, but
using these I can tweak only plain-text representaiton, surely HTML is
adjustable...
Hello,
I am unsure as to how many of us actually use SmartBat for scheduling,
but wouldn't it be neat to sync it with an external CalDav or "Windows
Calendar"?
I have looked around and it seems like such option is currently not
available.
@Ritlabs,
Was this ever requested / discussed / on
Hello Andrew,
Sunday, October 20, 2019, 10:56:30 PM, you wrote:
> * Is anyone aware of a way to disable automatic tabs creation?
> * ...or maybe there is a way to close them all automatically?
> * ...or (as the last resort) create a hotkey that nukes them all?
Two things:
1. Screenshots are
Hello All,
Every time I search for something using a "Quick Search" toolbar,
small tab with the results appears underneath the message list.
Those tabs are not deleted automatically and stay there as a useless
reminder of past attempts to find something. Worse, entering new text
in the "Quick
Windows 10 has default contacts location set to ~/Contacts
Has anyone came across a way to synchronize Bat's contacts with the
said folder?
Current version is 8.0.18 | 'Using TBUDL' information:
http://www.silverstones.com/thebat/TBUDLInfo.html
Greetings,
As an avid Zimbra user (as well the TheBat user!), I wonder if anyone
else is missing "tabs" in the interface?
Imagine fairly typical situation: you are working on several letters at the
same
time and need to quickly skim through something in the Inbox.
On *nix, one could use
Hello MFPA,
Sunday, October 6, 2019, 3:41:41 AM, you wrote:
>> Good to know... Here is the same image:
>> https://i.imgur.com/nYgAZfH.png
> If it's always about the same amount of space, you could alter the
> column widths (or add extra columns to the display).
I was looking for an option
Hello MFPA,
Friday, October 4, 2019, 8:34:38 AM, you wrote:
>> Is there a way to make column(s) automatically fill
>> the horizontal
>> space of the message list?
> Not that I know of.
Ok, created support request with Ritlabs...
>> Please see the screenshot
>> attached.
> I'm not sure the
Hello,
Is there a way to make column(s) automatically fill the horizontal
space of the message list? Please see the screenshot attached.
--
Cheers,
A
Current version is 8.0.18 | 'Using TBUDL' information:
Hello MFPA,
Friday, September 13, 2019, 4:16:03 AM, you wrote:
> Immediately after deleting several messages one at a time, I would
> expect Ctrl+Z to restore the last one deleted, then another Ctrl+Z to
> restore the previous one deleted, and so on until no further actions
> are stored to undo.
Hello MFPA,
Thursday, September 12, 2019, 3:59:15 AM, you wrote:
> The browse deleted messages and undelete function is neat. But not so
> intuitive as a simple CTRL+Z.
Precisely!
Current version is 8.0.18 | 'Using TBUDL' information:
Hello MAU,
Wednesday, September 11, 2019, 1:28:03 AM, you wrote:
> Hello Andrew,
>> CTRL-Z is a mnemonic for "Undo". I was expecting that it would undo
>> the deletion and move message back to where it was.
> And it works as such when you are in the Editor window.
> When you delete a
Hello Thomas,
Tuesday, September 10, 2019, 8:19:15 PM, you wrote:
> Hello Andrew,
> On Tue, 10 Sep 2019 20:14:01 +0930 GMT (10-Sep-19, 17:44 +0700 GMT),
> Andrew Savchenko wrote:
>> Hi,
>> Is that something weird on my end or TheBat! does not support CTRL+Z
>> for
Hi,
Is that something weird on my end or TheBat! does not support CTRL+Z
for deleted messages?.. Deleted as moved into "Trash", not wiped.
Thanks.
Current version is 8.0.18 | 'Using TBUDL' information:
Hello Jack,
Sunday, September 1, 2019, 8:39:48 AM, you wrote:
> I just noticed that the sig cutoff "-- " doesn't seem to work when I reply, or
> maybe I am not understanding what it's for.
I am admittedly late to the party, but... How do you turn on the
signature cut-off? :)
Hello All,
I am evaluating TheBat for a bit more than a week and, so far, have
mixed feelings. While software certainly has a sheer amount of
user-exposed functions and allows fair amount of adaption for a
particular workflow, there are bugs that make me question QC process
at RitLabs. Concerning
78 matches
Mail list logo