Re[3]: [SOGo] sending using different "from" email - how to setup?

2022-06-27 Thread "Martin Bowesman"

Hi Brett,

Do you have the domain property set in sogo.conf ?

SOGoMailCustomFromEnabled = YES;

If this is not set, then when you try and create an identify the text 
entered will be red, and the 'OK' button will remain greyed out - I've 
confirmed this behaviour in my environment.  Make sure this property is 
set, sogo restarted and let us know how you go.


Regards

Martin

-- Original Message --
From: "Bret Watson" 
To: users@sogo.nu
Sent: 15/06/2022 11:07:01 PM
Subject: Re[2]: [SOGo] sending using different "from" email - how to 
setup?



Hi Martin,
is there some good instructions on creating identities? Because 
following them so far has resulted in SoGo refusing to create them :(




On Wednesday, June 15, 2022 05:35 AWST, "\"Martin Bowesman\"" 
(mpb_s...@bowesman.net)  wrote:



Hi Bret,

If you are looking at using multiple domains, then yes, you you do 
need

to create a new mail account in Sogo which references an IMAP server,
which can be the same IMAP server hosting your other domains.

If you are wanting to use different aliases on the same domain, then 
you
just need to create identities under that mail account in Sogo, and 
this

will allow you to define the sender address when composing an email.

Regards

Martin

-- Original Message --
From: "Juergen M. Bruckner" 
To: users@sogo.nu
Sent: 15/06/2022 2:28:10 AM
Subject: Re: [SOGo] sending using different "from" email - how to 
setup?


>Hello Bret,
>
>this depends not only on SOGo but also on the underlying mail server.
>
>So that a SOGo account can use different sender addresses, these 
addresses must also be created at least as aliases for the respective 
mailbox on the mail server.

>
>Since this process is different for each mail server, I have to refer 
you to the documentation for the mail server you are using.

>
>regards
>Juergen
>
>Am 14.06.22 um 07:53 schrieb "Bret Watson" (b...@ticm.com):
>>
>>Trying to work out how to do this..
>>google workplace could allow me to register multiple domains/emails 
into one account and then choose which one I was sending an email as.

>>
>>SoGo appears to be able to do this, but the moment I change the 
"from" email it goes red and refuses to let me send... Doco seems to 
want me to have a separate imap host to allow this?

>>
>>What is the correct way to allow different "from" addresses?
>>
>>Thanks
>
>-- /¯\ No |
>\ / HTML | Juergen Bruckner
> X in | juergen@bruckner.email
>/ \ Mail |

--
users@sogo.nu
https://inverse.ca/sogo/lists

--
users@sogo.nu
https://inverse.ca/sogo/lists
--
users@sogo.nu
https://inverse.ca/sogo/lists

Re[2]: [SOGo] sending using different "from" email - how to setup?

2022-06-15 Thread "Martin Bowesman"

Hi Bret,

If you are looking at using multiple domains, then yes, you you do need 
to create a new mail account in Sogo which references an IMAP server, 
which can be the same IMAP server hosting your other domains.


If you are wanting to use different aliases on the same domain, then you 
just need to create identities under that mail account in Sogo, and this 
will allow you to define the sender address when composing an email.


Regards

Martin

-- Original Message --
From: "Juergen M. Bruckner" 
To: users@sogo.nu
Sent: 15/06/2022 2:28:10 AM
Subject: Re: [SOGo] sending using different "from" email - how to setup?


Hello Bret,

this depends not only on SOGo but also on the underlying mail server.

So that a SOGo account can use different sender addresses, these addresses must 
also be created at least as aliases for the respective mailbox on the mail 
server.

Since this process is different for each mail server, I have to refer you to 
the documentation for the mail server you are using.

regards
Juergen

Am 14.06.22 um 07:53 schrieb "Bret Watson" (b...@ticm.com):


Trying to work out how to do this..
google workplace could allow me to register multiple domains/emails into one 
account and then choose which one I was sending an email as.

SoGo appears to be able to do this, but the moment I change the "from" email it 
goes red and refuses to let me send... Doco seems to want me to have a separate imap host 
to allow this?

What is the correct way to allow different "from" addresses?

Thanks


-- /¯\   No  |
\ /  HTML |Juergen Bruckner
 Xin  |juergen@bruckner.email
/ \  Mail |


--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Updating events via DAVx5 not possible, caused by UTF BOMs everywhere?

2021-10-18 Thread Martin Boonk
Hi,

I am trying to track down a problem during sync with DAVx5 4.0.0 and SOGo 5.2.0 
(Arch linux server).
Downgrading to SOGo 5.1.0 did not change the behaviour.

Creation of an event works without problems. Updating the same event creates an
HTTP 412 by SOGo. DAVx5 gets the following after PUT: 

ETag: "gcs"

But the multistatus received after REPORT contains the following:

gcs

This causes DAVx5 to double quote the ETag for the If-Match-header like so:
if-match: "\"gcs\"". Naturally this does not match and creates the 412.

I have seen these additional UTF BOMs also at the start of VCARD/VCALENDAR.


Are these created by SOGo? I can not see them in my in the database (MariaDB 
utf8mb4).
What can I do, to get my sync with DAVx5 working again?


Best regards

Martin


-- 
users@sogo.nu
https://inverse.ca/sogo/lists


[SOGo] 2 questions on an testsetup

2021-07-21 Thread Martin Kopp

Hi,

We are new to sogo, like it and evaluating the product. We found 2 
topics which are a bit tricky to us.



1) Appointments from external sources are only displayed in the Mailbox. 
They are not written (temporary) in the calendar. So while i am on 
vacation i wouldn't see new appointments over activesync (calendar) or 
caldav without looking in the mailbox. I have to hit the button "add to 
calendar" to see it there.


Is this a topic for the wishlist to automatically add appointments to 
the calendar or did i missed some documentation?



2) Tried to build an postgres HA-Cluster in Background. When switching 
over is there a parameter or possibility to give sogo the information, 
that a db-reconnect should be done? It hangs for some minutes.



Thanks for help

best regards

Martin

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] ANN: SOGo v2.4.0 released!

2021-04-09 Thread Martin Rabl

This is the version with the old Thunderbird-like frontend. :-)

Am 09.04.21 um 15:46 schrieb Tanstaafl (tansta...@libertytrek.org):

2.4?

What is the current version???

On 4/7/2021 2:52 PM, "SOGo Reporter" (flachape...@inverse.ca) wrote

Minor release, but many bug fixes. Download it now!

NEW RELEASE

ANNOUNCEMENT
SOGo v2.4.0

The Inverse Team is pleased to announce the immediate availability of 
SOGo version 2.4.0.
This is a minor release of SOGo which focuses on improved stability 
over previous versions.

—
New features

  * *core:* Support smtps and STARTTLS for SMTP (cd3095e

),
closes #31 
  * *core:* Debian 10 (Buster) support for x86_64 (closes #4775
)

Enhancements

  * replace calls to create GMT NSTimeZone instance (2b33d45

),
closes #3757 

Bug Fixes

  * *addressbook(dav):* add support for macOS 11 (Big Sur) (c65e121

),
closes #5203 
  * *addressbook(dav):* add support for macOS 11 (Big Sur) (0057524

),
closes #5203 
  * *calendar:* fix all-day events in lists (1268e23

)
  * *web:* restored mail threads state of inbox on initial page load
  * *web:* fixed and improved messages list in threads mode
  * *web:* sanitize value of draft auto save timer, defaults to 5 minutes
  * *core:* adjust syntax for Python > 2 (9198fc9

)
  * *core:* synchronize database schema with v5 (a98fe2f

)
  * *tool:* sogo-tool manage-acl not working on v2 (closes #4292
)
  * *packaging:* add dh_makeshlibs back (0fa6947

)
  * *packaging:* disable openchange permenantly (0c47b63

)
  * *packaging:* disabled openchange some more (2911578

)
  * *packaging:* more openchange cleanups (cfd4c7b

)
  * *packaging:* more openchange cleanups (9a0b0cc

)
  * *packaging:* remove deps on openchange (acb2a34

)

Localization

  * update translations (32bc1e8

)

See the closed tickets 
 for this 
release and the complete change log 
.

Download 

Upgrade Instructions → 



What is SOGo

SOGo is a free and modern scalable groupware server. It offers shared 
calendars, address books and emails through your favorite Web browser 
or by using a native client such as Mozilla Thunderbird and Lightning, 
Apple Calendar and Address Book (Mac OS X and iOS) and Microsoft Outlook.


SOGo is standard-compliant and supports CalDAV, CardDAV and reuses 
existing IMAP, SMTP and database servers - making the solution easy to 
deploy and interoperable with many applications.


SOGo features:

  * Scalable architecture suitable for deployments from dozen to many
thousand users
  * Rich, responsible Web-based interface aligned with Google Material
Design guidelines
  * Improved integration with Mozilla Thunderbird and Lightning by
using the SOGo Connector and the SOGo Integrator
  * Two-way synchronization support with any Microsoft
ActiveSync-capable device (Apple iOS, Android, Windows Phone,
BlackBerry 10) or Outlook 2013/2016
  * Excellent native integration with Apple software (OS X and iOS)
and Android-based devices

and many more! SOGo and our connectors are completely free.

Try Online 

Available accounts: *sogo1*, *sogo2* and *sogo3*.
Their password is the same as their username.

Helping

SOGo is a collaborative effort in order to create the best 

Re: [SOGo] Thunderbird with Connector 68.0.x - managing ACLs

2020-02-11 Thread Martin LEUSCH

Hi Markus,

SOGo Connector is only able to manage ACL for calendars and address book.

To manage mail folder ACL there is Imap-ACL-Extension 
(https://addons.thunderbird.net/fr/thunderbird/addon/imap-acl-extension/) 
but this add-on is not yet compatible with Thunderbird 68.


Martin


Le 10/02/2020 à 20:58, Markus Winkler (m...@irmawi.de) a écrit :

Hi all,

I have a general question regarding the SOGo Connector. In the 
documentation I found this:


--- snip ---
Among the supported features of the SOGo Integrator extension, we have :
    Remote administration of folder access control lists (ACL)
--- snip ---

Does that mean, that within Thunderbird I should be able to share some 
of my mail folders with other users?


If yes:

I have installed the new Connector and can, for example, see mail 
folders shared by other users - no problem. Also: I can share my 
calendars with other users, can manage specific access rights for them 
etc. - no problem


But when I click on one of my own mail folders -> properties -> share: 
I can see all _my_ access rights to this folder, among others: 
administer the folder. But _how_ can I do this? I can't see any button 
or something similar for this.


Is the SOGo Connector sufficient for this (and maybe is only missing 
some local or [Dovecot] server side settings)? Or do I need an 
additional TB add-on for this? I hope I didn't only overlook something 
...


It would be nice if somebody could help me.

Thanks and regards,
Markus

P.S.: Sharing the mail folders within the webmail client works without 
any problem.

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Middle name field missing for contacts and not processed correctly when changed.

2020-01-08 Thread Martin Trinks

Hello Joop,

it seems to me that the support of vCard 3.0 is not yet complete. I 
opened the bug 4892 which is one example of that, you now have another one.


You should open a new bug for your problem (or one for complete vCard 
3.0 support in general).


There is also bug 1205 which asked for vCard 4.0 support some time ago.

Best regards
Martin

On 07.01.2020 20:29, Joop Martens (j...@starkriet.nl) wrote:


Hello,

After migrating all my contacts to Sogo I'm running into the issue 
that changing middle names is not handled properly.


When changing the middle name of a contact on an Android smartphone 
using Activesync the middle name field is send to Sogo:


Jan 07 19:50:37 sogod [12325]: 
<0x0x557e5373bbf0[SOGoActiveSyncDispatcher]> EAS - request for device 
androidc1529267344: 
"http://www.microsoft.com/;>


 
  
   1578357780
   vcard%2Fpersonal
   
   1
   10
   
    
 1
 20
    
   
   
    
18E9-5E13A680-5-69F5A700.vcf
 
  
  Eagle, Test Van
  Test
middle
  Eagle
  
  
  
  
  
   1
   
  
 
    
   
  
 


In the raw vcard the displayname (FN) is changed but the middle name 
(3rd value of N) is unchanged.


BEGIN:VCARD
UID:18E9-5E13A680-5-69F5A700.vcf
VERSION:3.0
CLASS:PUBLIC
PROFILE:VCARD
FN:Eagle\, Test middle
N:Eagle;Test;van de
END:VCARD

When changing the middle name of a contact using Thunderbird with 
CardDAV the middle name is changed properly:


BEGIN:VCARD
UID:18E9-5E13A680-5-69F5A700.vcf
VERSION:3.0
CLASS:PUBLIC
PROFILE:VCARD
FN:Test middle Eagle
N:Eagle;Test;middle
BDAY:2020-01-01
END:VCARD

I'm also surprised that the webinterface of Sogo does not provide a 
middle name field for contacts at all during editing, so I am 
wondering if middle names are not supported at all (Sounds unlikely to 
me) or if I'm running into a bug that I should file, or do I have 
misconfigured something?


Searching the mailing lists and bug-tracker does not provide me any 
applicable results so any advise is appreciated.


Best regards,

Joop Martens

--
users@sogo.nu
https://inverse.ca/sogo/lists


--
Dr. Martin Trinks
Basycon Unternehmensberatung GmbH
Welserstraße 1, 81373 München

Telefon: +49 89 890671-48
Mobil: +49 172 8912707

Amtsgericht München HRB 117925
Geschäftsführer: Dr. Alexander Bartmann

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Issues with Apostrophe (Single Quote)

2019-11-26 Thread Anselm Martin Hoffmeister

Hi Andrew,

I just tested writing a mail from SOGo webmail (4.1.0 in this case) to a 
fake version of my private account elsewhere, having inserted an 
apostrophe '. My private server rightfully refuses the (invalid) 
destination address - it seems SOGo does everything correctly here and 
hands through the apostrophe exactly as I would expect.


Trying to replicate the problem, doing the same with both the forward 
and backward tick ´` (single quotation marks or accent over blank, or 
whatever you call them), the same happens, SOGo hands through those 
mails and the destination server then refuses - the forward tick for 
"invalid postbox", the backtick as "restricted characters in address", 
and the non-delivery mail quotes the refused target address including 
the superfluous characters.


So it seems (my) SOGo 4.1.0 works correctly. But there may be other 
parties involved: Usually SOGo hands off the mail to a local running 
exim (or postfix), which then forwards the mail as applicable. There 
may be a different mail path between roundcube and SOGo, depending on 
your local configuration.


Can you find some relevant lines in the mail server logs? In exim case 
and on Debian(ish) Linuxes, /var/log/exim4/mainlog would be the place to 
investigate.


Also having details on the software version involved and perhaps the 
relevant parts of the SOGO config may be helpful.


Best regards

Anselm

Am 26.11.2019 um 13:37 schrieb Andrew Mogg (and...@logicomm.co.uk):


Hi

We are having issues with a particular email address which has a ‘ in 
its email address. Such as Dano’rou...@gmail.com


When the email is sent from SOGo, it removes the ‘ from the email 
address, so the email is actually sent to danorou...@gmail.com 
 and therefore fails (ie bounces). 
Interestingly, when I access the server via Roundcube and send, this 
does not happen, so its SOGo


Has anyone had any experience of this?


This email has been scanned for email related threats and delivered 
safely by Exascale.

For more information please visit https://www.exascale.co.uk


--
users@sogo.nu
https://inverse.ca/sogo/lists

--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Not possible to subscribe in Thunderbird to Personal Calendar of sogo2 at demo.sogo.nu

2019-11-08 Thread Martin Trinks

Hello,

for some testing purposes I want to subscribe in Thunderbird to the 
Personal Calendar of the user "sogo2" at the SOGo-demo (demo.sogo.nu, 
see sogo.nu very below).


There I copied the CalDav URL of that calendar and used it to add a New 
Calendar ("On the network", ...). The calendar appears in Thunderbird, 
but it can not be synchronized.


Does anyone have an idea what is wrong here?

Best regards
Martin
--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Questions about SOGo

2019-11-06 Thread Anselm Martin Hoffmeister

Hi Alwin,


we have quite a similar setup here. As most colleagues here have several 
"identities" (which is, they work for both companies sharing this office 
space) and mail should be sent with the corresponding signature, 
depending on the original incoming address, the mail program must select 
the correct identity on reply.


Luckily for us, Thunderbird does exactly this. As you noticed, the 
webmailer also looks into the original mail and selects an appropriate 
"identity".



So this is obviously a mail user agent thing, in the first place at 
least. I am aware of huge differences between Outlook versions out 
there, and at least that Outlook 2016 that my PC has (and that is not 
opened more than once a year, luckily) seems not to do a proper 
matching. I guess you should look into the options that Outlook 
(+AddOns) might offer here, rather than on the server-side.



It seems that some people achieved to have Thunderbird-like "identities" 
in Outlook by creating more that one account (and disabling all but the 
first one). I did not read though wether the automatic choice of sender 
address came with this.


You might want to have a look at 
https://www.ivasoft.com/smartreply2010.shtml (not affiliated to it, just 
a google result), which seems to quite match your request (add-on comes 
at 50$/workstation). So there seems to be a lack of functionality in 
Outlook, and someone makes a living off this.



For emClient, I cannot tell, as I never used that one, sorry.


On the other hand you can do all kinds of smart or stupid things in 
rewriting outgoing mails on the server. I would recommend against that 
approach, as the reply mail does not necessarily bear the information of 
the original target mail address. You would have to store this on the 
"way in", with the message id, and in the outgoing mail, lookup the 
"Message-Reply-ID" (or similar header field) and find the address to 
insert from your database. Yes this is possible, and a rather ugly hack! 
E.g. in an Exim setup, you might add a "router" there to pass your mail 
into some manipulation scripts, and probably insert some bad bugs into 
mail handling while doing so. BTDT.



BR

Anselm



Am 06.11.2019 um 08:44 schrieb "WebMan [Technik]" (tech...@webman.de):


Hello,

we are currently converting our mailsystem to SOGo. We have a few 
questions. Maybe someone can answer me if this is possible.


In our e-mails, we have tried to create a specific structure:

  * There is a main mailbox with some aliases (created in SOGo)
  * The mails sent to this alias are automatically moved to a
subfolder in the same mailbox

Now it gets difficult:

  * If one of these mails is answered, the client (for example,
Outlook or em Client) should automatically select the address to
which the mail was sent
  o The aliases (as sender addresses) could also be sent
automatically by the server to the client. Then he could make
the choice easily.
  + Is there perhaps a SOGo plugin to do that?
  + Where can I even see / browse the available SOGo plugins?
  o It would be okay to create the addresses manually, but the
client would still have to select them automatically (but
unfortunately that does not work right now).
  + Maybe there is an Outlook plugin?
  o There is this functionality in the webmailer. It just works
like we want it to.

If that does not work:

  * Is there a possibility to set a manually added sender address
(alias) as default? Unfortunately, I couldn’t find anything.
  * Is it possible to manipulate the sender address on server-side
(depending on the user and only if the receiver is external)

Thanks in Advance!

Greetings:
Alwin Sonnemann


--
users@sogo.nu
https://inverse.ca/sogo/lists

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Technical issue with SOGo CardDAV server PROPFIND request

2019-10-04 Thread Martin Trinks

Hello all,

does anyone know why there has not yet been any answer to the below 
question?


We have also users affected by the mentioned problem. There is an 
address book shared by some user with all other users. The other users 
are subscribed to that address book and can use it in the web interface, 
but it is not detected in Thunderbird via TbSync and the log entries are 
analogous to those given below.


Can anyone explain the problem and point in some direction how to fix this?

Thanks in advance and best regards
Martin

On 12.02.2019 23:17, John Bieling (john.biel...@gmx.de) wrote:

Hi,

I am trying to get all resources available for a given user by doing a 
few PROPFIND requests. One includes a request for group-membership and 
I get back a principal URL, but when I PROPFIND that URL, I get a 403.


Does anybody know what I am doing wrong? Here is a complete log of 
what is send and received:


** Sun Feb 10 2019 15:41:22 GMT+0100 (CET) **
[URL Request #1] : https://***/SOGo/dav/user1

** Sun Feb 10 2019 15:41:23 GMT+0100 (CET) **
[REQUEST] : PROPFIND


  
    
    
  


** Sun Feb 10 2019 15:41:23 GMT+0100 (CET) **
[RESPONSE] : 207


  
    /SOGo/dav/user1
    
  HTTP/1.1 200 OK
  
    
  /SOGo/dav/user1/Contacts/
    
    
  xmlns:D="DAV:">/SOGo/dav/user2/calendar-proxy-write/

    
  
    
  


** Sun Feb 10 2019 15:41:23 GMT+0100 (CET) **
[URL Request #1] : https://***/SOGo/dav/user2/calendar-proxy-write/

** Sun Feb 10 2019 15:41:23 GMT+0100 (CET) **
[REQUEST] : PROPFIND


  
    
    
  


** Sun Feb 10 2019 15:41:23 GMT+0100 (CET) **
[RESPONSE] : 403

http://www.w3.org/1999/xhtml;>
An error occurred during object publishingtried to 
access private object (0x0x55bfc2b12b90, 
SoClass=SOGoCalendarProxy)



Thanks for your time,
John

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Automatically Attach File

2019-10-01 Thread Anselm Martin Hoffmeister
Dear Christopher,

this can be done with the same method that also works for some other
mail clients, e.g. Thunderbird, Maildroid...:

Create a mail signature (SOGO-Settings-IMAP accounts-Edit-Signature) and
switch to HTML source code view. Enter your signature, something like
(an anonymized version of a company signature I had in my mailbox):


    My name goes 
here
    Position
    Company
 Inc.
    
Company
 registration HR 4711
VAT-ID: DE47110815


The image data has to be embedded here, behind the "base64,". Get the
base64 for example on the command-line, with
base64 < imagefile.png
and put it instead of the XXX (may be several lines - better
optimize the image you use to have proper size and dimensions).

Best regards

Anselm

Am 01.10.19 um 17:54 schrieb Christopher Wooley
(theonlytalkingg...@gmail.com):
> I am trying to create a signature that will contain a company logo and
> will have the best chance of being displayed, but I need it to show up
> as a "cid" and attachment. I don't want to have to manually attach the
> file every time. Is there a way to get SOGO to automatically attach a
> file?
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists


-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] HTTPS switches to HTTP after login

2019-07-10 Thread Anselm Martin Hoffmeister
Hi Paul,

please check your Apache configuration. As you want https, you might
have to set lines like
  RequestHeader set "x-webobjects-server-port" "443"
  RequestHeader set "x-webobjects-server-name" "%{HTTP_HOST}e" env=HTTP_HOST
  RequestHeader set "x-webobjects-server-url" "https://%{HTTP_HOST}e;
env=HTTP_HOST

In my configuration, those (in /etc/apache2/conf-available/SOGo.conf,
but my box is running Debian - might be a little different) were
surrounded by , so perhaps you also need to
enable that module (a2enmod headers).

Lacking those (or having them disabled, effectively), page redirects
might default to http on port 80, which you seem to experience.

Hope this helps!

Anselm

Am 10.07.19 um 21:25 schrieb "Webb, Paul" (pwebb0...@gmail.com):
>
> OS: Ubuntu 18.04.2 LTS
> Version: SOGo v4 Nightly Build
>
> Hi all,
>
> I've started over and built a SOGo server from the ground up. Apache2,
> MySQL 5.7.26, Postfix (latest from repos), Dovecot, etc.
>
> I've got a wildcard SSL certificate from Comodo and got my Apache2
> configuration working properly. I can visit
> https://[mx.domain.com]/SOGo and get a login page.
>
> I have a test user, sogoadmin, in the Mysql database with a password
> set for it.
>
> When I log in:
>
> https://[mx.domain.com]/SOGo/so/sogoadmin/Mail/
>
> I get "Authenticating" then "Welcome SOGo Admin" and then it spins
> for awhile.
>
> Eventually it errors out and the URL has changed to
>
> http://[mx.domain.com]/SOGo/so/sogoadmin/Mail/view#!/Mail/0/INBOX
>
> instead of
>
> https://[mx.domain.com]/SOGo/so/sogoadmin/Mail/view#!/Mail/0/INBOX.
>
> If I just add the s in after the http, it lets me continue on to the
> user inbox.
>
> Is there somewhere in the configuration that I need to tell SOGo that
> we're requiring HTTPS at all times?
>
> Thanks, all!
>
> -Paul
>
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists


-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Extracting address books and calendars content

2019-06-12 Thread Anselm Martin Hoffmeister
Hallo André,

I guess that CALDAV is the way to go (via HTTPS, preferrably). There are
php snippets that demonstrate Web DAV accesses, for example, so you
could "roll your own", for both data read and write, and have full
flexibility to access single items, while keeping sogo happy with
synchronizing changed data to whichever user/program/device needs it.
For mere backups though, the SQL database dump would be the obvious choice.

I admit that for a certain purpose I was a bit lazy and used a database
dump: We need a plain csv file of phone number and associated names for
our PABX to display caller names. There is some script that I will not
disclose (as it is not pretty at all), but it is fed with the output of

echo "SELECT c_content FROM sogoanshoffm00112288562" | mysql -u
sogodbuser thesogodb | parsevcardscript

where the table name has been hand-picked, obviously, and the mysql uses
an options file (which contains the password in this case).

The data is - you may have guesses - in vcard format, which to me seems
like the shabby brother of an LDAP record - it seems to have been kind
of a standard for some time, or rather, a set of "we use it like this"
that are mostly compatible. Don't trust much on any application to
behave, and with a large range of software and devices accessing your
sogo, you will for example have several TEL;TYPE= and EMAIL;TYPE=
variants that not every program uses in the same way. YMMV.

For restoring the complete dataset, I had to do this with several SOGo
instances a while back when changing hardware, and on that occasion
doing a full software install instead of just moving the root partition.
Just shutting down sogo, exporting the database, importing on the new
server and firing up sogo there with the mostly identical config file
worked as expected.

Best regards
Anselm


Am 12.06.19 um 19:18 schrieb André Rodier (an...@rodier.me):
> Hello, wonderful SOGo team,
>
> I need a way to export and import an address book, and maybe a
> calendar, from the command line.
>
> I am interested even if your answer is partial, for instance just the
> export. The bare minimum would be exporting an address book in a text
> file, in any appropriate format.
>
> I am happy to write SQL as well if this is necessary, although I would
> prefer use the http protocol.
>
> Also, can I restore, still using the command line, the user's data from
> a SOGo backup, or the whole database is the way to go.
>
> Thanks a lot for your hard work, this is great, and thanks to you and
> Debian, my project is taking shape.
>
> Thanks a lot for your hard work and your insights.





-- 
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Send email notifications disabled but "calendar-auto-schedule" announced by server

2019-03-08 Thread Martin Trinks

Hello,

I just want to inform you that I reported an issue for this topic, see 
ID 0004688 <https://sogo.nu/bugs/view.php?id=4688>.


Please add your comments there, if you are effected by this issue as 
well. (Which I thought most of you are, but in view of the little 
response this most likely is not the case.)


Best regards
Martin

On 15.02.2019 16:18, ... wrote:

Hello,

we are using SOGo without the function to send emails notifications to 
meeting participants , i. e.


SOGoAppointmentSendEMailNotifications = NO.

But the CalDAV header indicates with "calendar-auto-schedule", that 
our server is able to send such emails.


Lightning
  CalDAV: DAV header: 1, 2, access-control, calendar-access, 
calendar-schedule,
  calendar-auto-schedule, calendar-proxy, calendar-query-extended, 
extended-mkcol,

  calendarserver-principal-property-search  calDavCalendar.js:1966

Lightning
  CalDAV: Calendar asdf supports calendar-auto-schedule
  calDavCalendar.js:1983

Therefore, all our users have to sent the according Thunderbird 
(version 60) option ("Prefer client-side email scheduling") for each 
of their calendars. Is that how it should be?


Wouldn't it be better if the server did not indicates 
"calendar-auto-schedule" with the SOGo option mentioned above 
disabled? Or is there any other option to disable the notice of 
"calendar-auto-schedule"?


Best regards
Martin


--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Issue with shared calender data retrieval of with tbsync or iOS devices

2019-03-08 Thread Martin Trinks

Hi all,

we have the same problem with such error messages in TbSync.

For us it seems that all users using TbSync are affected, meaning that 
they are missing address books and calendars of other users.


Does anybody now any solution to this. It seems to me that this is a bug 
in SOGo, or am I missing something?


Best regards
Martin


On 06.02.2019 13:48, Andreas Oster (aos...@novanetwork.de) wrote:

Hi all,

I have one additional comment on the issue. Even though the automatic 
retrieval of calendar and contact resources does not work via the 
well-known URLs, manual CALDAV configuration in Lightning via the

calendar links, provided by the web frontend, is working.
In the meantime I have completed a new SOGo server setup. 
Unfortunately the problem does also happen on the new system.


Thank you for your kind help.

Best regards
Andreas


Am 05.02.2019 um 15:57 schrieb Andreas Oster (aos...@novanetwork.de):

Hi all,

We are currently using the latest nightly SOGo release 4.0.5, and 
came all the way from version 2.something. We did not face any major 
issues ever since.
Unfortunately at some point one of the updates seems to have broken a 
part of the calendar sharing functionality.


All users are able to share their calendars and contacts via the web 
frontend. We use Thunderbird in combination with the tbsync plugin to 
integrate calendar and contact resources from SOGo.
For old/existing users this is working without any problem but for 
newly created accounts, retrieving the calendar list fails as soon as 
the users does subscribe to shared calendars.


tbsync error message:

<--

URL:
http://sogo.ad.nova.de/SOGo/dav/caladmin/calendar-proxy-write/ 
(PROPFIND)


Request:
xmlns:card="urn:ietf:params:xml:ns:carddav">/>


Response:

http://www.w3.org/1999/xhtml;>

An error occurred during object publishing
tried to access private object (0x0x55da67cbc960, 
SoClass=SOGoCalendarProxy)




-->

tbsync uses /.well-known/caldav and /.well-known/carddav to fetch the 
available resources.



This is only happening for newly created accounts. For existing users 
retrieval of shared calendars does work.


Does anyone have an idea what could be the cause of the issue ?

Thank you for your kind help.

Best regards
Andreas




--
users@sogo.nu
https://inverse.ca/sogo/lists


[SOGo] Send email notifications disabled but "calendar-auto-schedule" announced by server

2019-02-15 Thread Martin Trinks

Hello,

we are using SOGo without the function to send emails notifications to 
meeting participants , i. e.


SOGoAppointmentSendEMailNotifications = NO.

But the CalDAV header indicates with "calendar-auto-schedule", that our 
server is able to send such emails.


Lightning
  CalDAV: DAV header: 1, 2, access-control, calendar-access, calendar-schedule,
  calendar-auto-schedule, calendar-proxy, calendar-query-extended, 
extended-mkcol,
  calendarserver-principal-property-search  calDavCalendar.js:1966

Lightning
  CalDAV: Calendar asdf supports calendar-auto-schedule
  calDavCalendar.js:1983

Therefore, all our users have to sent the according Thunderbird (version 
60) option ("Prefer client-side email scheduling") for each of their 
calendars. Is that how it should be?


Wouldn't it be better if the server did not indicates 
"calendar-auto-schedule" with the SOGo option mentioned above disabled? 
Or is there any other option to disable the notice of 
"calendar-auto-schedule"?


Best regards
Martin

--
users@sogo.nu
https://inverse.ca/sogo/lists


[SOGo] Issues for SOGo Connector

2019-01-11 Thread Martin Trinks

Hello,

it seems, that there are two places to open issues for SOGo Connector at 
the moment,

- https://sogo.nu/bugs/ (with Project = "SOGo Connector") and
- https://github.com/inverse-inc/sogo-connector/issues.

How are they related? Which one is the correct/better one for opening 
new issues?


Best regards
Martin Trinks

--
Dr. Martin Trinks
Telefon +49 89 890671-48, Mobil +49 172 8912707
Basycon Unternehmensberatung GmbH
Welserstraße 1, 81373 München
Amtsgericht München HRB 117925
Geschäftsführer: Dr. Alexander Bartmann

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Configuration to show nickname of contacts in web interface

2018-12-14 Thread Martin Trinks

Hi,

thank Christian and Hartmut for the reply.

I would like to configure which attributes are shown in the web frontend 
in the view of a single contact (after clicking on one contact in the 
contact/address book list).


It seems to me, that SOGo stores this configuration in some .wox files. 
Does anybody know some (specific) guideline how to modify them correctly?


Best regards
Martin


On 30.11.2018 10:33, Christian Mack (christian.m...@uni-konstanz.de) wrote:

Hello

Am 29.11.18 um 08:51 schrieb Martin Trinks (martin.tri...@basycon.com):

is there an option to configure which informations are shown for
contacts in the web interface? Especially, how can I make the "Nickname"
visible?


I am not sure what you mean.
Do you mean, how to get own attributes from LDAP?
Then you should use "mapping" in SOGoUserSources.
https://sogo.nu/files/docs/SOGoInstallationGuide.html#_ldap_attributes_mapping

Or do you mean showing additional information on autocompletion?
Then use "SOGoLDAPContactInfoAttribute" in SOGoUserSources (restricted
to one attribute).

Or do you mean which Attributes are shown in address book lists?
Then you have to either modify the source code yourself or open a
feature request athttps://sogo.nu/bugs/


Kind regards,
Christian Mack


--
Dr. Martin Trinks
Telefon +49 89 890671-48, Mobil +49 172 8912707
Basycon Unternehmensberatung GmbH
Welserstraße 1, 81373 München
Amtsgericht München HRB 117925
Geschäftsführer: Dr. Alexander Bartmann

--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Configuration to show nickname of contacts in web interface

2018-11-29 Thread Martin Trinks

Hello,

is there an option to configure which informations are shown for 
contacts in the web interface? Especially, how can I make the "Nickname" 
visible?


Best regards
Martin Trinks

--
Dr. Martin Trinks
Telefon +49 89 890671-48, Mobil +49 172 8912707
Basycon Unternehmensberatung GmbH
Welserstraße 1, 81373 München
Amtsgericht München HRB 117925
Geschäftsführer: Dr. Alexander Bartmann

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Thunderbird Plugin

2018-09-04 Thread Martin LEUSCH

Hi,

I did some test with sogo-integrator and I can confirm the two bugs 
mentioned by Patrick.


I also found that I cannot delete a CalDAV calendar added manually from 
an other source. I found the following error in the console:


An error occurred executing the calendar_delete_calendar_command 
command: [Exception... "[JavaScript Error: "getCalendarManager is not 
defined" {file: 
"chrome://sogo-integrator/content/calendar/calendar-overlay.js" line: 
117}]'[JavaScript Error: "getCalendarManager is not defined" {file: 
"chrome://sogo-integrator/content/calendar/calendar-overlay.js" line: 
117}]' when calling method: [nsIController::doCommand]" nsresult: 
"0x80570021 (NS_ERROR_XPC_JAVASCRIPT_ERROR_WITH_DETAILS)"  location: "JS 
frame :: chrome://global/content/globalOverlay.js :: goDoCommand :: line 
84"  data: yes]


I tried to add the global address book manually, I can sync it as a 
regular address book but I cannot remove it after that.


Martin


Le 04/09/2018 à 05:58, Patrick Ben Koetter (p...@sys4.de) a écrit :

It works for me with TB 60 on arch-linux, except for the SOGo public
(global) adressbook, which doesn't show up in the TB adressbook. (It's
still there in the web interface)
I've subscribed to several calendars, which I hide by default. When I
start TB 60 using sogo-integrator-60.0.0-1b3235cbf1-sogo-demo.xpi and
sogo-connector-60.0.0-e12f7705cf.xpi they are not hidden anymore. Hiding
them and restarting TB yields the same result – they will not be hidden
in my calendar view.

p@rick


--
users@sogo.nu
https://inverse.ca/sogo/lists


[SOGo] Dedicated EAS instance with SOGo v4

2018-05-09 Thread Martin LEUSCH

Hi,

I'm testing SOGo v4 on Debian Stretch and try to set up a dedicated 
instance for Activesync clients following this how-to 
.


The dedicated instance fail to start with error "/[ERROR] 
<0x0x563aeac3ed80[WOWatchDog]> unable to listen on specified port, check 
that no other process is already using it/". It seems like it doesn't 
get the configuration from 
"/var/lib/sogoeas/GNUstep/Defaults/.GNUstepDefaults" and try to listen 
on the same port as the main instance. The instance is started with the 
sogoeas user take the custom number of worker correctly (from the init 
script /etc/init.d/sogo-eas).


Is there modification in SOGo v4 that could cause this?


--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Domain migration

2017-09-04 Thread Martin

For answering myself:


  * When I restore users folders and preferences to the new server
with sogo-tool, shared folders and ACL (calendar and address
books) are not restored (from SOGo v2 nightly 2.3.22.20170831-1 to
SOGo v3 nightly 3.2.10.20170706-1 with combined database schema).
Is sogo-tool can restore shared calendars and address books? Is it
support restoring from v2 to v3? Is it support restoring from old
database schema to combined schema?

There is already a bug report  
and a thread in this mailing list about this issue.


  * I have an other mail server to migrate with samba using username
as uid and the new server use full mail address as uid. Is
sogo-tool can restore user backup with an other username?


 * Rename the file according the username you want (mv
   /path/to/backups/username /path/to/backups/usern...@exemple.com)
 * In the backup file, rename your folders in table section (sed -i
   s#/Users/username/#/Users/usern...@exemple.com/#g
   /path/to/backups/usern...@exemple.com)
 * In the preferences section, adjust folders settings according the
   new usernames (sed -i s#:Calendar#/@imrcom.fr:Calendar/#g
   /path/to/backups/usern...@exemple.com; sed -i
   s#:Contacts#/@imrcom.fr:Contacts/#g
   /path/to/backups/usern...@exemple.com)


  * I try to migrate users mailbox with doveadm (/doveadm backup -N -u
u...@exemple.com remote:newserver.exemple.com/) but shared IMAP
folders are not migrated on the new server. How can I migrate
shared IMAP folders?

This is not related to SOGo, in dovecot, ACL module was not enabled for 
doveadm (only enabled for IMAP service) so I just add to add acl in 
mail_plugins setting in donvecot config file.


--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Domain migration

2017-09-01 Thread Martin LEUSCH

Hi,

I'm migrating various domains to a new server and after some tests I 
have encountered some issues:


 * When I restore users folders and preferences to the new server with
   sogo-tool, shared folders and ACL (calendar and address books) are
   not restored (from SOGo v2 nightly 2.3.22.20170831-1 to SOGo v3
   nightly 3.2.10.20170706-1 with combined database schema). Is
   sogo-tool can restore shared calendars and address books? Is it
   support restoring from v2 to v3? Is it support restoring from old
   database schema to combined schema?
 * I have an other mail server to migrate with samba using username as
   uid and the new server use full mail address as uid. Is sogo-tool
   can restore user backup with an other username?
 * I try to migrate users mailbox with doveadm (/doveadm backup -N -u
   u...@exemple.com remote:newserver.exemple.com/) but shared IMAP
   folders are not migrated on the new server. How can I migrate shared
   IMAP folders?

Thanks,

Martin

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Outlook and Caldav

2017-07-28 Thread Martin Rabl
Only Caldav, but mixed with Exchange-Calendars. Addresses I didn't try.
Ah, Outlook 2010


Viele Grüße,
Martin Rabl

(sent from my smartphone - excuse typos)

> Am 28.07.2017 um 20:09 schrieb Bob Wooldridge (bob.wooldri...@edm-inc.com) 
> <users@sogo.nu>:
> 
>  Original Message 
> Subject: Re: [SOGo] Outlook and Caldav
> From: Martin Rabl (martin.r...@rablnet.de) <users@sogo.nu>
> To: users@sogo.nu
> Date: 07/28/2017 12:49 PM
>> Me!
>> I like it very well!
>> Best plugin for Outlook, I worked with.
> Are you using sogo calendar and address book in Outlook exclusively?
> 
> -- 
> Bob Wooldridge
> EDM Incorporated
> http://www.edm-inc.com
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists

-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Outlook and Caldav

2017-07-28 Thread Martin Rabl
Me!
I like it very well!
Best plugin for Outlook, I worked with.


Viele Grüße,
Martin Rabl

(sent from my smartphone - excuse typos)

> Am 28.07.2017 um 18:28 schrieb Bob Wooldridge (bob.wooldri...@edm-inc.com) 
> <users@sogo.nu>:
> 
> I just discovered this interesting plugin which advertises adding caldav sync 
> capabilities to Outlook.  Anyone using it?
> 
> http://caldavsynchronizer.org/
> 
> -- 
> Bob Wooldridge EDM Incorporated http://www.edm-inc.com
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists

-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Alternative SOGo packages repository for Debian and Ubuntu

2016-12-07 Thread &quot;Martin Rahnefeld"

Even the website is down. For those, who are in need of some kind of 
documentation:

there is luckily a recent snapshot: 
http://web.archive.org/web/20161021054540/http://www.openchange.org/


Am Mittwoch, Dezember 07, 2016 12:00 CET, "devteam" (devt...@alpeinsoft.ch) 
 schrieb:
 Hi!

Project openchange stopped all development.

May be somebody have ideas/solutions? @Slavek?

On 07/28/2016 01:30 AM, Slávek Banko (slavek.ba...@axis.cz) wrote:
> Hi all,
>
> I have experience with maintaining packages for multiple versions of Debian
> and Ubuntu distributions. Thanks to this I have ready builder for many
> versions of Debian and Ubuntu for multiple architectures.
>
> I dared to prepare an alternative repository of SOGo packages for Debian and
> Ubuntu. Packages are available not only for SOGo 3.x, but also for SOGo 2.x.
> Distributions are Debian 7 (Wheezy), Debian 8 (Jessie), Ubuntu 14.04 (Trusty)
> and Ubuntu 16.04 (Xenial). Architectures amd64 and i386. If there arises an
> interest, I can try to build also for other architectures (armhf, arm64,...).
>
> Currently, all these SOGo builds are without OpenChange support, because it is
> difficult to build OpenChange. During my attempts to build OpenChange always
> occurs FTBFS...
>
> To install gpg key, use:
> apt-key adv --keyserver sks.labs.nic.cz --recv-key A04BE668
>
> The format of the line to the apt sources is as follows:
>
> For SOGo v.2.x
> deb http://www.axis.cz/linux/debian  sogo-v2
>
> For SOGo v3.x
> deb http://www.axis.cz/linux/debian  sogo-v3
>
> Where  could be: wheezy, jessie, trusty or xenial. Do not
> be fooled by the word 'debian' in the url - this is true even for the Ubuntu
> packages.
>
> The packages numbering follows the usual packaging rules. By the way, packages
> are also ready to properly update during dist-upgrade, because version of
> distribution is a part of the packages version. This is a small advantage
> over the official Inverse packages ;)
>
> Cheers

--
users@sogo.nu
https://inverse.ca/sogo/lists
 
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

AW: [SOGo] Newbie is looking for EASY installation instructions for SOGo on KUBUNTU

2016-11-21 Thread &quot;Martin Rahnefeld"

Hi there,

I have basically used this setup here: http://majentis.com/?p=344 with a few 
modifications for xenial, I could post the install-script, if you like.
Everything should be working then, after you setup postfix to send mail over 
you existing mail account.

You can use Active Sync via simply entering you public IP/Domain, which you 
mailserver is on, to your device.

E.g.
my Sogo install is on my homeserver, which has an incoming port forward (443). 
The domain is some myfritz/dyndsn resolver.
I  have a normal public smtp, to which I forward all my mails from sogo with 
postfix.

in my device I simply put mydomain.myfritz and everything works.

Best Regards,

Martin



Am Samstag, November 19, 2016 23:51 CET, "adg adg82439" (adg82...@live.de) 
<users@sogo.nu> schrieb:
 Hi Keith,

as I want to switch from windows with outlook ( email some accounts some 
provider, contacts, calendar events )

where easily can sync contacts and calendar to my nokia symbina phone, to linux 
and Sogo might be useful.


As I understand SOGo is a Groupware which can sync by active sync.

But I do not find how to use Sogo after installation.


regards

Jo






Von: users-requ...@sogo.nu [users-requ...@sogo.nu] im Auftrag von Keith 
Williams [users@sogo.nu]
Gesendet: Donnerstag, 17. November 2016 20:17
An: users@sogo.nu
Betreff: Re: [SOGo] Newbie is looking for EASY installation instructions for 
SOGo on KUBUNTU

Hey newbie,

I am thankfull that Christian replied on this as I deleted (unplanned)
your original email... x-(

There is no "easy" manual for SOGo.. but I am going to guess that you
are making the same mistake I did.

Don't think of SOGo as a complete email solution. What SOGo does very,
very genios(TM)-ly, is to make almost any email type service a compete
collaborative/business type solution.

SOGo is the extra gear. SOGo basically provides to your already setup
email server ( be that your local mail server or outside service
provider ) and then servers the calendar/contacts Active Sync or DAV. So
no need for a out of box licensed system or propietary system.

So more of a layer to take your average mail system to professional
collaboration. :-)

So if you want to get to grips with SOGo and a mail solution quickly..
there's a awesome solution called iredmail (http://www.iredmail.org/)
that will set up a system from scratch to a complete solution. Check it out.

If this doesn't help, buzz me on my private email addie and we get it
sorted :-)

Regards,


On 17/11/2016 16:22, Christian Mack (christian.m...@uni-konstanz.de) wrote:
> Hello
>
> Am 06.11.2016 um 17:17 schrieb adg adg82439 (adg82...@live.de):
>> Hello,
>>
>> as I tried some installation tips in the Internet,
>> which doesn't bring ME to a solution,
>> most of them make assumption like some kind of servers or static ip address, 
>> ...
>> which I do not have and finally wasn't able to adapt into a working 
>> environment
>>
>>
>> I ask is there some kind of manual available
>> to install SOGo on a single Home Linux PC
>>
>> for the purpose of migrate and serve emails, calendar, contcacts
>> from Windows 7-Outlook to Linux SOGo
>>
>> and be able to synchronize contacts and events to smartphones by activesync 
>> (Symbian,iOS,Android)
>> and receive from several email provider emails stored in SOGo (Dovecot)?
>>
>
> Without a static IP-Address or at least a Dyn-DNS-Setup SOGo is not
> usable, as you cannot access it with your devices.
>
> Whether you use a workstation which runs 24x7 or a server or a VM is
> irrelevant.
>
>
> Kind regards,
> Christian Mack
>
--
users@sogo.nu
https://inverse.ca/sogo/lists
--
users@sogo.nu
https://inverse.ca/sogo/lists
 
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] cannot send message: (smtp) all recipients discarded

2016-11-20 Thread &quot;Martin"
Hello,

I´ve done a trial setup of SOGo a few month ago, everything worked fine,
today i´ve retested a few things and now I can´t send mails via smtp because
I get the message „cannot send message: (smtp) all recipients discarded”

I´ve already rechecked mailserver and I can send mails through smtp so i´m
sure there should be no problem.

Regards Martin

-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] ActiveSync socket shutdown

2016-11-16 Thread &quot;martin"

I dont know where to put in nginx, but you shoulld have a timeout in nginx for 
active sync. Like:ProxyPass /Microsoft-Server-ActiveSync 
\http://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync \retry=60 
connectiontimeout=5 timeout=3600




Am Mittwoch, November 16, 2016 13:34 CET, "Andreas" (list_m...@zero-one.net) 
 schrieb:
  Here is the nginx config for SOGo: 
location ^~/SOGo
   {
      proxy_pass http://127.0.0.1:2;
      proxy_redirect http://127.0.0.1:2 default;
      # forward user's IP address
      proxy_set_header X-Real-IP $remote_addr;
      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_set_header Host $host;
      proxy_set_header x-webobjects-server-protocol HTTP/1.0;
      proxy_set_header x-webobjects-remote-host 127.0.0.1;
      proxy_set_header x-webobjects-server-name $server_name;
      proxy_set_header x-webobjects-server-url $scheme://$host;
      proxy_set_header x-webobjects-server-port $server_port;
      proxy_connect_timeout 90;
      proxy_send_timeout 90;
      proxy_read_timeout 90;
      proxy_buffer_size 4k;
      proxy_buffers 4 32k;
      proxy_busy_buffers_size 64k;
      proxy_temp_file_write_size 64k;
      break;
   }   Am Mi, 16. Nov 2016, um 08:44, schrieb martin:How long does you nginx 
keeps the connection open?Could you post your nginx conf for sogo?  Am 
Dienstag, November 15, 2016 21:57 CET, "Andreas" (list_m...@zero-one.net) 
 schrieb: Hi, I am facing issues with ActiveSync while only 
having one client (1device) on the server. My logs say: mail1 sogo.log: Nov 15 
21:45:36 sogod [17252]: [ERROR]<0x0x56309eb3b0a0[WOHttpTransaction]> client 
disconnected duringdelivery of response for  (len=13): thesocket was 
shutdown Sometimes even my nginx crashes. This is my configuration in 
nginx:location ^~ /Microsoft-Server-ActiveSync 
{proxy_passhttp://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync;proxy_redirect
 http://127.0.0.1:2/Microsoft-Server-ActiveSync/;}location ^~ 
/SOGo/Microsoft-Server-ActiveSync 
{proxy_passhttp://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync;proxy_redirecthttp://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync
 /;} This is my config in sogo.conf WOWorkersCount = 15;SOGoMaximumPingInterval 
= 3540;SOGoMaximumSyncInterval = 3540;SOGoInternalSyncInterval = 30; What could 
be the reason for the crashes? SOGo web interface is workingpretty good ...  
Thanks, Andreas--users@sogo.nuhttps://inverse.ca/sogo/lists  
--users@sogo.nuhttps://inverse.ca/sogo/lists --
users@sogo.nu
https://inverse.ca/sogo/lists
 
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] ActiveSync socket shutdown

2016-11-16 Thread &quot;martin"

How long does you nginx keeps the connection open?
Could you post your nginx conf for sogo?


Am Dienstag, November 15, 2016 21:57 CET, "Andreas" (list_m...@zero-one.net) 
 schrieb:
 Hi,

I am facing issues with ActiveSync while only having one client (1
device) on the server.

My logs say:

mail1 sogo.log: Nov 15 21:45:36 sogod [17252]: [ERROR]
<0x0x56309eb3b0a0[WOHttpTransaction]> client disconnected during
delivery of response for  (len=13): the
socket was shutdown

Sometimes even my nginx crashes.

This is my configuration in nginx:
location ^~ /Microsoft-Server-ActiveSync {
proxy_pass
http://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync;
proxy_redirect http://127.0.0.1:2/Microsoft-Server-ActiveSync
/;
}
location ^~ /SOGo/Microsoft-Server-ActiveSync {
proxy_pass
http://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync;
proxy_redirect
http://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync /;
}

This is my config in sogo.conf

WOWorkersCount = 15;
SOGoMaximumPingInterval = 3540;
SOGoMaximumSyncInterval = 3540;
SOGoInternalSyncInterval = 30;

What could be the reason for the crashes? SOGo web interface is working
pretty good ...


Thanks,

Andreas
--
users@sogo.nu
https://inverse.ca/sogo/lists
 
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Remove Version info on logon page

2016-10-12 Thread &quot;martin"

Awesome,

thanks very much. I will try it in the next few days.
It would be somehow more user friendly if there would be a config option (like 
in apache2: production, testing, ...)


Regards

martin


Am Mittwoch, Oktober 12, 2016 12:03 CEST, "Jan Laufik" (jlau...@gmail.com) 
<users@sogo.nu> schrieb:
 Ho.
   You can do that, just follow the procedure mentioned here:

https://sogo.nu/nc/support/faq/article/how-to-customize-the-html-2.html
 Then open ~sogo/GNUstep/Library/SOGo/Templates/MainUI/SOGoRootPage.wox in your 
favourite editor, look for the line containing "buildDate" and comment it out.
 Jan
Hi,

is there a possibility to remove the "info" Symbol on the logon page? At least 
the detailed version of my sogo install?
If the system is reachable over the web, there is no need to give anyone a hint 
on software, especially if you could use it to implement an attack.

Regards

martin--
users@sogo.nu
https://inverse.ca/sogo/lists
 
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Remove Version info on logon page

2016-10-10 Thread &quot;martin"

Hi,

is there a possibility to remove the "info" Symbol on the logon page? At least 
the detailed version of my sogo install?
If the system is reachable over the web, there is no need to give anyone a hint 
on software, especially if you could use it to implement an attack.

Regards

martin
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] SOGo Interface with two different ports behind NAT?

2016-10-10 Thread &quot;martin"

Found a solution, the error was on my firewall.
It seems it is not possible to forward to different source ports to the same 
destinantion port (there is not error message in my router/firewall).

Therefore I created a second interface on my sogo machine, to which I can 
connect with https. Works great.

Regards
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] SOGo Interface with two different ports behind NAT?

2016-10-06 Thread martin
Is it possible to access Sogo Web-interface with two different ports? Like 443 
and 4430?
I have migrated my exchange (was reachable under 443) to Sogo (4430). Now I 
dont want to reconfigure all devices.
Therefore I would like to access the web-interface with Port 443 and 4430.

In my firewall (home-router) I have a port redirect from 4430 to 443 to my sogo 
vm. There is another one from 443 to 443 to the same sogo vm, but this one isnt 
working (maybe loop).
I think I have to modify my SOGo.conf line RequestHeader set 
"x-webobjects-server-url"

RequestHeader set "x-webobjects-server-url" https://MYDOMAIN.myfritz.net:4430
 
If I have 4430 appended it works for Port 4430. 
If I remove the port nothing works.
If I use RequestHeader set "x-webobjects-server-url" "https://%{HTTP_HOST}e; 
env=HTTP_HOST I can see the logon page. But I get redirected to a blank one if 
I give credentials- because its http instead of https. Somewhere a Redirect 
works wrong.

But I am not familiar enough with Redirects with apache2



Regards

my SOGo.conf

Alias /SOGo.woa/WebServerResources/ \
  /usr/lib/GNUstep/SOGo/WebServerResources/
Alias /SOGo/WebServerResources/ \
  /usr/lib/GNUstep/SOGo/WebServerResources/


AllowOverride None


Order deny,allow
Allow from all

= 2.4>
Require all granted


# Explicitly allow caching of static content to avoid browser specific 
behavior.
# A resource's URL MUST change in order to have the client load the new 
version.

  ExpiresActive On
  ExpiresDefault "access plus 1 year"



ProxyRequests Off
SetEnv proxy-nokeepalive 1
ProxyPreserveHost On

ProxyPass /Microsoft-Server-ActiveSync \
 http://127.0.0.1:2/SOGo/Microsoft-Server-ActiveSync \
 retry=60 connectiontimeout=5 timeout=360

ProxyPass /SOGo http://127.0.0.1:2/SOGo retry=0

http://127.0.0.1:2/SOGo>
## adjust the following to your configuration
## and do not forget to enable the headers module

  RequestHeader set "x-webobjects-server-port" "443"
  

  RequestHeader set "x-webobjects-server-name" "%{HTTP_HOST}e" env=HTTP_HOST
  
  RequestHeader set "x-webobjects-server-url" 
"https://MYDOMAIN.myfritz.net:4430;
  #RequestHeader set "x-webobjects-server-url" "https://%{HTTP_HOST}e; 
env=HTTP_HOST

  RequestHeader set "x-webobjects-server-protocol" "HTTP/1.0"


  RequestHeader set x-webobjects-remote-host %{REMOTE_HOST}e env=REMOTE_HOST
  AddDefaultCharset UTF-8

  Order allow,deny
  Allow from all


# For Apple autoconfiguration

  RewriteEngine On
  RewriteRule ^/.well-known/caldav/?$ /SOGo/dav [R=301]
  RewriteRule ^/.well-known/carddav/?$ /SOGo/dav [R=301]



RewriteEngine On
RewriteRule ^/SOGo/(.*)$ /SOGo/ [env=REMOTE_HOST:%{REMOTE_ADDR},PT]
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

AW: [SOGo] Cant sync with MAPI/Outlook 2007 - EXCEPTION: IOException, reason: IMAP connection failed

2016-10-04 Thread &quot;martin"
Hi there, I have used Exchange 2007 for quite some years, but I am trying to switch to Sogo, Openchange and so on. The most of my install works fine, except for one tiny culprit. I cant use Outlook 2007 or 2010 with "old" users.I have used Outlook 2013 to create and import all mails (5 mailboxes), they are syncing fine with iOS, Windows Phone, Android, SOGO Webmail, Windows 10 Mailapp and Outlook 2013. Therefore I wanted to Switch the testserver with Exchange 2007, but: If I am trying to connect Outlook 2007 to one of these accounts I get an Samba backtrace (and Outlook closes, doesnt sync anything). If I create a new user  (samba-tool user add test && openchange_newuser --create test) I can use Outlook 2007. Therefore I think my install should be OK, but somehow populated Mailboxes with Outlook 2007 are not.Does anyone has an idea? I am out of ideas. Thanks Martin   My config: Ubuntu Server 16.04 with amavisd-new    1:2.10.1-2ubuntu1     dovecot-antispam   2.0+20150222-1build1      dovecot-core   1:2.2.22-1ubuntu2     dovecot-imapd  1:2.2.22-1ubuntu2     dovecot-ldap   1:2.2.22-1ubuntu2     dovecot-lmtpd      1:2.2.22-1ubuntu2     dovecot-managesieved   1:2.2.22-1ubuntu2     dovecot-pop3d  1:2.2.22-1ubuntu2     dovecot-sieve  1:2.2.22-1ubuntu2     fetchmail      6.3.26-2      openchange-ocsmanager  4:2.4-zentyal22       openchange-rpcproxy    4:2.4-zentyal22       openchangeproxy    4:2.4-zentyal22       openchangeserver   4:2.4-zentyal22       postfix    3.1.0-3       postfix-ldap   3.1.0-3       python-samba   2:4.3.9+dfsg-0ubuntu0.16.04.2     samba  2:4.3.9+dfsg-0ubuntu0.16.04.2     samba-common   2:4.3.9+dfsg-0ubuntu0.16.04.2     samba-common-bin   2:4.3.9+dfsg-0ubuntu0.16.04.2     samba-dev  2:4.3.9+dfsg-0ubuntu0.16.04.2     samba-dsdb-modules 2:4.3.9+dfsg-0ubuntu0.16.04.2     samba-libs:amd64   2:4.3.9+dfsg-0ubuntu0.16.04.2     samba-vfs-modules  2:4.3.9+dfsg-0ubuntu0.16.04.2     sogo:amd64 3.1.5.20160919-1      sogo-activesync    3.1.5.20160919-1      sogo-openchange:amd64  3.1.5.20160919-1      spamassassin   3.4.1-3   Backtrace  [...][2016/08/11 22:56:17.589146,  0] ../lib/util/become_daemon.c:124(daemon_ready)  STATUS=daemon 'samba' finished starting up and ready to serve connections[2016/08/11 22:56:19.417073,  0] libmapi/oc_log.c:52(oc_logv)  MAPIPROXY server mode enabled[2016/08/11 22:56:19.428627,  0] libmapi/oc_log.c:52(oc_logv)  mapiproxy/libmapiproxy/dcesrv_mapiproxy_server.c:187(mapiproxy_server_load): MAPIPROXY proxy mode disabled[2016/08/11 22:56:19.428818,  0] libmapi/oc_log.c:54(oc_logv)  mapiproxy/servers/default/nspi/dcesrv_exchange_nsp.c:1609(dcesrv_exchange_nsp_init): dcesrv_exchange_nsp_init[2016/08/11 22:56:19.440522,  0] libmapi/oc_log.c:54(oc_logv)  Using MySQL backend for openchangedb: mysql://openchange-user:MYPASSWORD@localhost/openchange[2016/08/13 23:34:46.936540,  0] libmapi/oc_log.c:52(oc_logv)  mapiproxy/servers/default/emsmdb/dcesrv_exchange_emsmdb.c:304(EcDoRpc_process_transaction): MAPI Rop: 0xfe (0)2016-08-13 23:34:48.824 samba[2878]   registered class 'MAPIStoreCalendarContext' as handler of 'calendar' contexts2016-08-13 23:34:48.828 samba[2878]   registered class 'MAPIStoreTasksContext' as handler of 'tasks' contexts2016-08-13 23:34:48.828 samba[2878]   registered class 'MAPIStoreContactsContext' as handler of 'contacts' contexts2016-08-13 23:34:48.829 samba[2878]   registered class 'MAPIStoreNotesContext' as handler of 'notes' contexts2016-08-13 23:34:48.829 samba[2878]   registered class 'MAPIStoreFallbackContext' as handler of 'fallback' contexts2016-08-13 23:34:48.829 samba[2878]   registered class 'MAPIStoreCalendarContext' as handler of 'calendar' contexts2016-08-13 23:34:48.829 samba[2878]   registered class 'MAPIStoreOutboxContext' as handler of 'outbox' contexts2016-08-13 23:34:48.829 samba[2878] 

[SOGo] Shared calendar with Openchange on Outlook

2016-10-03 Thread Martin LEUSCH

Hi,

I have a SOGo server with samba and Openchange.

I can configure accounts on Outlook (2007 or 2010) clients without 
problem but I cannot access to calendars shared by users who have 
configured their account on Outlook.


I ran SOGo on Debian Jessie with self compiled Samba 4.3.8, Openchange 
2.4-zentyal22 and SOGo 3.1.5.


I not have this problem with old inverse's packages Samba 4.1.18, 
Openchange 2.4-zentyal18 and SOGo 3.1.2.


Anyone else have this problem?

Is shared calendar is working fine on Outlook with inverse's packages on 
Ubuntu Xenial?


Thanks,

--
Martin Leusch

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Flush OpenChange data

2016-09-27 Thread Martin LEUSCH

It worked perfectly.

Thanks.

Le 27/09/2016 à 15:21, Ludovic Marcotte (lmarco...@inverse.ca) a écrit :
How can I remove all OpenChange data from Samba and database? 


First try with openchange_user_cleanup + create a new Outlook profile.


--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Flush OpenChange data

2016-09-27 Thread Martin LEUSCH

Hi,

After some modification in my SOGo configurations, the synchronization 
with exchange client doesn't work anymore. So I wan to try to 
reprovision OpenChange data and recreate user.


How can I remove all OpenChange data from Samba and database?

Thanks,

--
Martin Leusch

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Cannot subscribe to calendar shared to a group

2016-09-20 Thread Martin LEUSCH

How can I get calendar ACL working well with samba group?

Here is part of my sogo configuration:

{
id = directory;
displayName = "myDomain";
canAuthenticate = YES;
type = ldap;
CNFieldName = cn;
IDFieldName = sAMAccountName;
UIDFieldName = sAMAccountName;
MailFieldNames = (mail, otherMailbox);
baseDN = "dc=myDomain,dc=fr";
bindDN = "cn=ldap,cn=Users,dc=myDomain,dc=fr";
bindFields = (sAMAccountName, userPrincipalName);
bindPassword = "myLdapPassword";
hostname = ldap://127.0.0.1:389;
filter = "((mail=\'*\') AND (objectClass=person))";
  },
 {
id = myDomain_groups;
displayName = "Groupes d'utilisateurs";
canAuthenticate = YES;
type = ldap;
CNFieldName = cn;
IDFieldName = sAMAccountName;
UIDFieldName = sAMAccountName;
baseDN = "dc=myDomain,dc=fr";
bindDN = "cn=ldap,cn=Users,dc=myDomain,dc=fr";
bindPassword = "myLdapPassword";
hostname = ldap://127.0.0.1:389;
filter = "((mail=\'*\') AND (objectClass=group))";
  }

My groups defined in samba look like:

   dn: CN=Group1,CN=Users,DC=myDomain,DC=fr
   objectClass: group
   objectClass: securityPrincipal
   objectClass: mailRecipient
   objectClass: top
   cn: Group1
   groupType: -2147483646
   instanceType: 4
   objectCategory: CN=Group,CN=Schema,CN=Configuration,DC=myDomain,DC=fr
   objectSid:: AQUAAAUVIraSP7NOvHzVEyPvXQQAAA==
   sAMAccountName: Group1
   distinguishedName: CN=Group1,CN=Users,DC=myDomain,DC=fr
   mail: gro...@mydomain.fr
   member: CN=User1,CN=Users,DC=myDomain,DC=fr
   member: CN=User2,CN=Users,DC=myDomain,DC=fr
   member: CN=User3,CN=Users,DC=myDomain,DC=fr
   name: Group1
   objectGUID:: ATTfk6r5qUS4xT/ZNEodBg==
   sAMAccountType: 268435456
   uSNChanged: 5251
   uSNCreated: 5251
   whenChanged: 20160915124953.0Z
   whenCreated: 20160915124953.0Z

I can share calendar to a group without problem but cannot subscribe to 
the shared calendar with an user in this group from the GUI.


If I add manually the calendar in the user profile in the data base I 
can see the shared calendar but if I modify something from the GUI like 
ACL for all authenticated users the calendar is not subscribed anymore.


Someone could help me with this issue?

Thanks.


Le 15/09/2016 à 18:02, Martin LEUSCH (sce.t...@imereos.fr) a écrit :

Hi,

I have an installation of SOGo V3 working with a Samba directory as 
users source.


I set few group in Samba using the object class "group" and add a new 
users source for groups in SOGo. Then I can configure shared calendar 
to groups from a super user account but I cannot to calendar shared to 
a group, they are not listed in subscribe dialog. However if I set 
minimal right by default to see all calendar, I can subscribe to it 
and I get the right defined for the group previously and still access 
to it when I disable the default conf. I can also add manually the 
calendar in the user profile in MySQL.


Is it a bug or I missed something in my configuration?



--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Open-change question

2016-09-19 Thread Martin LEUSCH

Hi,

For your sieve problem, by default the sieve server of Dovecot accept 
connection only from the localhost, you have modify Dovecot 
configuration on your external server.


MAPIStore is not trusted by your external IMAP server, to access to IMAP 
accounts of your users, you can add a file with your users password to 
MAPIStore. (see SOGo documention here 
 
and here 
).



Le 17/09/2016 à 10:29, Madars Vitolins (madars.vitol...@gmail.com) a écrit :

Any news?

On 2016.09.15. 13:50, Madars Vitolins wrote:

Hi Guys,


I have installed ZEG virtual machine image and try to reconfigure it 
to use my existing - external STMP/IMAP server. All went ok, the SOGo 
web login does see my imap and see the e-mails in, but problem is 
with OpenChange/MAPI/Outlook. It does logon to account, but it seems 
that it sees the maildir of the ZEG server and not my external IMAP.


1. Can you explain where are OpenChange/MAPIStore object settings, 
how does OpenChange transfer e-mail to Outlook, in to what IP 
address/what folder it looks for settings?



So basically I have changes settings in: /etc/sogo/sogo.conf 
(SOGoIMAPServer, SOGoSieveServer, SOGoSMTPServer). Do I miss anything 
else?



2. Is the sieve critical at this point, does it somehow participates 
in mail delivery to MAPIStore? Because I still debugging Sieve 
support on my existing external IMAP (Dovecot) server.


Sogo version 3.1 used.

Thanks a lot in advance,
Madars







--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Cannot subscribe to calendar shared to a group

2016-09-15 Thread Martin LEUSCH

Hi,

I have an installation of SOGo V3 working with a Samba directory as 
users source.


I set few group in Samba using the object class "group" and add a new 
users source for groups in SOGo. Then I can configure shared calendar to 
groups from a super user account but I cannot to calendar shared to a 
group, they are not listed in subscribe dialog. However if I set minimal 
right by default to see all calendar, I can subscribe to it and I get 
the right defined for the group previously and still access to it when I 
disable the default conf. I can also add manually the calendar in the 
user profile in MySQL.


Is it a bug or I missed something in my configuration?

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Samba conflict on Debian Jessie

2016-07-13 Thread Martin LEUSCH
I successfully build samba 4.3.9 and openchange 2.4-zentyall22 but I 
have an error when I try to build sogo-openchange.
Can I only build only sogo-openchange or I have to build all SOGo 
project to build the openchange part?


There the error I get:

 Linking bundle SOGoBackend ...
   /usr/bin/ld: ne peut trouver -lSOGo
   collect2: error: ld returned 1 exit status
   /usr/share/GNUstep/Makefiles/Instance/bundle.make:205: recipe for
   target 'SOGoBackend.MAPIStore/./SOGoBackend' failed
   make[3]: *** [SOGoBackend.MAPIStore/./SOGoBackend] Error 1
   /usr/share/GNUstep/Makefiles/Instance/bundle.make:193: recipe for
   target 'internal-bundle-run-compile-submake' failed
   make[2]: *** [internal-bundle-run-compile-submake] Error 2
   /usr/share/GNUstep/Makefiles/Master/rules.make:298: recipe for
   target 'SOGoBackend.all.bundle.variables' failed
   make[1]: *** [SOGoBackend.all.bundle.variables] Error 2
   /usr/share/GNUstep/Makefiles/Master/bundle.make:37: recipe for
   target 'internal-all' failed
   make: *** [internal-all] Error 2


Le 11/07/2016 17:16, Patrice Levesque (pleves...@inverse.ca) a écrit :

But of course nothing prevents you from compiling and installing
Samba 4.4 out-of-band on Jessie, then compiling and installing
SOGo/OpenChange yourself.


--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Samba conflict on Debian Jessie

2016-07-11 Thread Martin LEUSCH

Which sources of Openchange must be used, last stable (2.3) or current git?

Le 11/07/2016 17:16, Patrice Levesque (pleves...@inverse.ca) a écrit :

What is the best way to have the SOGo / Samba / OpenChange environment
working on Debian Jessie?

Compilation; see below.



Why there is no sogo-openchange package with sogo 3.1.3? Is SOGo still
working with OpenChange?

SOGo still works with OpenChange when hooked to Samba 4.4.  Of all the
distributions Inverse currently supports (Debian, Ubuntu, RHEL), only
Ubuntu Xenial ships with Samba 4.4.

But of course nothing prevents you from compiling and installing
Samba 4.4 out-of-band on Jessie, then compiling and installing
SOGo/OpenChange yourself.





--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Samba conflict on Debian Jessie

2016-07-11 Thread Martin LEUSCH
What is the best way to have the SOGo / Samba / OpenChange environment 
working on Debian Jessie?


Why there is no sogo-openchange package with sogo 3.1.3? Is SOGo still 
working with OpenChange?


Le 11/07/2016 16:11, Patrice Levesque (pleves...@inverse.ca) a écrit :

Is openchange working well with the Jessie samba packages 4.2.10 ?

Current OpenChange only works with Samba 4.4.x.

Older OpenChange worked with Samba 4.1.x. (and both are now EOL'ed).





--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Samba conflict on Debian Jessie

2016-06-30 Thread Martin LEUSCH

Is openchange working well with the Jessie samba packages 4.2.10 ?

Le 30/06/2016 16:05, Patrice Levesque (pleves...@inverse.ca) a écrit :

I'm trying to install SOGo and Samba on a fresh install of Debian
Jessie but I have a conflict when I try to install samba from the
Inverse SOGo v3 repository.
The Inverse package samba-libs depend of libldb1 < 2:1.1.18 but there
is only 2:1.1.20 in Jessie repository.  How can I solve this?

Jessie samba packages supersede Inverse's (4.2.10 vs. 4.1.18) and very
soon Inverse will stop shipping samba packages for Jessie.

Hence, I suggest you install Jessie's samba packages.





--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Samba conflict on Debian Jessie

2016-06-30 Thread Martin LEUSCH
I solved this conflict by manually install the previous version 
(2:1.1.17-2+deb8u1) of libldb1 and python-ldb downloaded from 
snapshot.debian.org. 
<http://snapshot.debian.org/package/ldb/2%3A1.1.17-2%2Bdeb8u1/>


Le 30/06/2016 11:32, Martin LEUSCH (sce.t...@imereos.fr) a écrit :

Hi,

I'm trying to install SOGo and Samba on a fresh install of Debian 
Jessie but I have a conflict when I try to install samba from the 
Inverse SOGo v3 repository.
The Inverse package samba-libs depend of libldb1 < 2:1.1.18 but there 
is only 2:1.1.20 in Jessie repository.

How can I solve this?

Thanks.


--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Samba conflict on Debian Jessie

2016-06-30 Thread Martin LEUSCH

Hi,

I'm trying to install SOGo and Samba on a fresh install of Debian Jessie 
but I have a conflict when I try to install samba from the Inverse SOGo 
v3 repository.
The Inverse package samba-libs depend of libldb1 < 2:1.1.18 but there is 
only 2:1.1.20 in Jessie repository.

How can I solve this?

Thanks.
--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Set SOGoSieveFilters with sogo-tool

2016-06-21 Thread Martin LEUSCH

I had effectively some errors in my sogo.conf, problem solved.

Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr

Le 21/06/2016 10:15, Christian Mack (christian.m...@uni-konstanz.de) a 
écrit :

As your sieve filter rule does not have 66 lines, it perhaps stumbles on
something in your sogo.conf.


--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Set SOGoSieveFilters with sogo-tool

2016-06-21 Thread Martin LEUSCH

Hi,

I've exactly the  same error when I run this command as sogo user with 
"sogo-tool user-preferences ..." or "sogo-tool restore ...".



Le 21/06/2016 10:15, Christian Mack (christian.m...@uni-konstanz.de) a 
écrit :

Am 20.06.2016 um 18:50 schrieb Martin LEUSCH (sce.t...@imereos.fr):

Hi,

I'm trying to copy the SOGoSieveFilters parameter from a SOGo server to
an other but I've got an error when I try to set this parameter:

2016-06-20 18:36:31.152 sogo-tool[11351] File NSPropertyList.m: 995.
In parsePlItem Missing semicolon in dictionary at line 66 char 2552
2016-06-20 18:36:31.154 sogo-tool[11351] File NSPropertyList.m: 995.
In parsePlItem Missing semicolon in dictionary at line 67 char 2560
<0x0xf5bd80[SOGoCache]> Cache cleanup interval set every 300.00
seconds
<0x0xf5bd80[SOGoCache]> Using host(s) '127.0.0.1' as server(s)
2016-06-20 18:36:31.287 sogo-tool[11351] To update Sieve scripts,
you must provide the "-p credentialFile" parameter
2016-06-20 18:36:31.287 sogo-tool[11351] Error updating sieve
script, not updating database

I tried different value for this parameter and always get exactly the
same error:

sogo-tool user-preferences set defaults martin.leusch
SOGoSieveFilters '{
 >   "SOGoSieveFilters": [
 > {
 >   "actions": [
 > {
 >   "argument": "INBOX/IMR/Technique/Mises a jour",
 >   "method": "fileinto"
 > }
 >   ],
 >   "active": 1,
 >   "match": "any",
 >   "name": "CRON-APT",
 >   "rules": [
 > {
 >   "field": "subject",
 >   "operator": "contains",
 >   "value": "CRON-APT completed"
 > }
 >   ]
 > }]
 > }'

or

sogo-tool user-preferences set defaults martin.leusch
SOGoSieveFilters '{"SOGoSieveFilters": []}'

Any idea?


Did you execute sogo-tool as user sogo?
As your sieve filter rule does not have 66 lines, it perhaps stumbles on
something in your sogo.conf.


Kind regards,
Christian Mack



--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Set SOGoSieveFilters with sogo-tool

2016-06-21 Thread Martin LEUSCH

I have same error when I try to use "sogo-tool restore -l  ".
I report this bug as 3741. <https://sogo.nu/bugs/view.php?id=3741>

Le 20/06/2016 18:50, Martin LEUSCH (sce.t...@imereos.fr) a écrit :

Hi,

I'm trying to copy the SOGoSieveFilters parameter from a SOGo server 
to an other but I've got an error when I try to set this parameter:


2016-06-20 18:36:31.152 sogo-tool[11351] File NSPropertyList.m:
995. In parsePlItem Missing semicolon in dictionary at line 66
char 2552
2016-06-20 18:36:31.154 sogo-tool[11351] File NSPropertyList.m:
995. In parsePlItem Missing semicolon in dictionary at line 67
char 2560
<0x0xf5bd80[SOGoCache]> Cache cleanup interval set every
300.00 seconds
<0x0xf5bd80[SOGoCache]> Using host(s) '127.0.0.1' as server(s)
2016-06-20 18:36:31.287 sogo-tool[11351] To update Sieve scripts,
you must provide the "-p credentialFile" parameter
2016-06-20 18:36:31.287 sogo-tool[11351] Error updating sieve
script, not updating database

I tried different value for this parameter and always get exactly the 
same error:


sogo-tool user-preferences set defaults martin.leusch
SOGoSieveFilters '{
>   "SOGoSieveFilters": [
> {
>   "actions": [
> {
>   "argument": "INBOX/IMR/Technique/Mises a jour",
>   "method": "fileinto"
> }
>   ],
>   "active": 1,
>   "match": "any",
>   "name": "CRON-APT",
>   "rules": [
> {
>   "field": "subject",
>   "operator": "contains",
>   "value": "CRON-APT completed"
> }
>   ]
> }]
> }'

or

sogo-tool user-preferences set defaults martin.leusch
SOGoSieveFilters '{"SOGoSieveFilters": []}'

Any idea?
--
Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr
tel.: 05 63 71 78 79 / mob.: 07 83 20 63 72
--
users@sogo.nu
https://inverse.ca/sogo/lists


--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Set SOGoSieveFilters with sogo-tool

2016-06-20 Thread Martin LEUSCH

Hi,

I'm trying to copy the SOGoSieveFilters parameter from a SOGo server to 
an other but I've got an error when I try to set this parameter:


   2016-06-20 18:36:31.152 sogo-tool[11351] File NSPropertyList.m: 995.
   In parsePlItem Missing semicolon in dictionary at line 66 char 2552
   2016-06-20 18:36:31.154 sogo-tool[11351] File NSPropertyList.m: 995.
   In parsePlItem Missing semicolon in dictionary at line 67 char 2560
   <0x0xf5bd80[SOGoCache]> Cache cleanup interval set every 300.00
   seconds
   <0x0xf5bd80[SOGoCache]> Using host(s) '127.0.0.1' as server(s)
   2016-06-20 18:36:31.287 sogo-tool[11351] To update Sieve scripts,
   you must provide the "-p credentialFile" parameter
   2016-06-20 18:36:31.287 sogo-tool[11351] Error updating sieve
   script, not updating database

I tried different value for this parameter and always get exactly the 
same error:


   sogo-tool user-preferences set defaults martin.leusch
   SOGoSieveFilters '{
>   "SOGoSieveFilters": [
> {
>   "actions": [
> {
>   "argument": "INBOX/IMR/Technique/Mises a jour",
>   "method": "fileinto"
> }
>   ],
>   "active": 1,
>   "match": "any",
>   "name": "CRON-APT",
>   "rules": [
> {
>   "field": "subject",
>   "operator": "contains",
>   "value": "CRON-APT completed"
> }
>   ]
> }]
> }'

   or

   sogo-tool user-preferences set defaults martin.leusch
   SOGoSieveFilters '{"SOGoSieveFilters": []}'

Any idea?

--
Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr
tel.: 05 63 71 78 79 / mob.: 07 83 20 63 72

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Migrate to combined database schema

2016-06-20 Thread Martin LEUSCH

Thanks, it's working fine now.

Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr

Le 17/06/2016 17:37, Ludovic Marcotte (lmarco...@inverse.ca) a écrit :


On 2016-06-17 11:31 AM, Martin LEUSCH (sce.t...@imereos.fr) wrote:

///OCSCacheURL = 
"mysql://openchange:///xxx/@127.0.0.1:3306/openchange/sogo_cache_folder";//

/


That one doesn't exist - it should be OCSCacheFolderURL.
--
Ludovic Marcotte
lmarco...@inverse.ca   ::  +1.514.755.3630  ::http://inverse.ca
Inverse inc. :: Leaders behind SOGo (http://sogo.nu), PacketFence 
(http://packetfence.org) and Fingerbank (http://fingerbank.org)
--
users@sogo.nu
https://inverse.ca/sogo/lists


--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Migrate to combined database schema

2016-06-17 Thread Martin LEUSCH

Hi,

I used the script sql-update-3.0.0-to-combined-mysql.sh to migrate to 
the new database schema.

Since, the calendars and addresses book are unusable. I've errors like this:

   /Jun 17 16:35:42 sogod [8891]:
   [ERROR]<0x7f1f925bd890[SOGoAppointmentFolder]:4832-57455A00-1-356FEC40>
   (-[SOGoAppointmentFolder
   
fetchFields:from:to:title:comp//onent:additionalFilters:includeProtectedInformation:]):
   missing folder for fetch!
   /

Now I have these databases settings in sogo.conf:

   /SOGoProfileURL =
   "mysql://openchange:xxx@localhost/openchange/sogo_user_profile";//
   //OCSFolderInfoURL =
   "mysql://openchange:///xxx/@localhost/openchange/sogo_folder_info";//
   //OCSCacheURL =
   
"mysql://openchange:///xxx/@127.0.0.1:3306/openchange/sogo_cache_folder";//
   //OCSStoreURL =
   "mysql://openchange:///xxx/@127.0.0.1:3306/openchange/sogo_store";//
   //OCSAclURL =
   "mysql://openchange:///xxx/@127.0.0.1:3306/openchange/sogo_acl";//
   //OCSSessionsFolderURL =
   
"mysql://openchange:///xxx/@localhost/openchange/sogo_sessions_folder";
   /

I followed steps describe here 
<https://lists.inverse.ca/sogo/arc/users/2016-05/msg00276.html> in this 
mailing list. I had to make some adjustments, the script can't parse my 
sogo.conf file (may be because I have some special chars in my mysql 
password).


Which database URL I supposed to have in sogo.conf and which tables I 
supposed to have in my database?


The server is in testing for now so I don't care about user data but it 
will be in production soon.


--
Martin Leusch
sce.t...@imereos.fr

--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Configure mailboxes quotas with Samba

2016-06-10 Thread Martin LEUSCH

Hi,

Is there a way to configure mailboxes quotas per user with 
SOGo+OpenChange+Samba server?


I tried to chose randomly an user attribute like "description" on samba 
to configure the quota in dovecot trough LDAP. It working correctly with 
IMAP but the quota information are not shown in Outlook with Exchange.


Is OpenChange does support mailboxes quotas?

--
Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr
tel.: 05 63 71 78 79 / mob.: 07 83 20 63 72

--
users@sogo.nu
https://inverse.ca/sogo/lists


[SOGo] Shared folders in Outlook

2016-04-21 Thread Martin LEUSCH

Hi,

I'm configuring server with SOGo, Samba and OpenChange.
When I share a folder in SOGo interface with an other user, the shared 
folder not appear in Outlook (with Exchange protocol).

I try to subscribe to shared folders in IMAP but it changes nothing.
Inversely, when I share in Outlook, the folder appear in the SOGo interface.

Is there a way to access shared folders in Outlook?

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] INBOX empty in Outlook with OpenChange

2016-04-20 Thread Martin LEUSCH

I just had to restart samba to get it working after fix dovecot.

Le 19/04/2016 23:12, "Qmail" (qm...@top-consulting.net) a écrit :

Great!

Another strange behavior we noticed which might be helpful to others...

If you start sogod and your dovecot doesn't accept authentication from 
the sogo machine ip, sogo won't attempt a second time! This means that 
even if you fix dovecot, it still won't work unless you restart sogod.


Took me a few days to figure this one out.


On Tue, Apr 19, 2016 at 12:27 PM, Martin LEUSCH <users@sogo.nu> wrote:

Thanks, I allow connection without password from localhost in
dovecot and it's work now.

Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr <mailto:sce.t...@imereos.fr>

Le 19/04/2016 16:48, "Qmail" (qm...@top-consulting.net
<mailto:qm...@top-consulting.net>) a écrit :

Did you allow your dovecot to accept any password from the
openchange server ?

This is crucial because openchange/samba doesn't have the user's
password so you must allow that IP to login directly.



On Tue, Apr 19, 2016 at 10:16 AM, Martin LEUSCH <users@sogo.nu>
<mailto:users@sogo.nu> wrote:

Hi,

I'm trying to configure a SOGo server with Samba and
Openchange support.
All working great except mail synchronization between
Openchange's
folders and Dovecot's folders.
In Outlook, INBOX is empty but there are some emails (I can
see emails
from the web interface, IMAP or Activsync) and I can see
emails sent
from Outlook in Sent folder in Outlook but not from others
sources.
There is no error reported by Outlook and logs for Apache
(for rpcproxy)
or Samba (for MAPI) seems OK.
Every things else work great.

Any ideas?

-- 
Martin Leusch

Service Technique IMEREOS
sce.t...@imereos.fr <mailto:sce.t...@imereos.fr>

-- 
users@sogo.nu <mailto:users@sogo.nu>

https://inverse.ca/sogo/lists

-- 
users@sogo.nu <mailto:users@sogo.nu>

https://inverse.ca/sogo/lists


-- 
users@sogo.nu <mailto:users@sogo.nu>

https://inverse.ca/sogo/lists

--
users@sogo.nu
https://inverse.ca/sogo/lists


--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] INBOX empty in Outlook with OpenChange

2016-04-19 Thread Martin LEUSCH
Thanks, I allow connection without password from localhost in dovecot 
and it's work now.


Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr

Le 19/04/2016 16:48, "Qmail" (qm...@top-consulting.net) a écrit :
Did you allow your dovecot to accept any password from the openchange 
server ?


This is crucial because openchange/samba doesn't have the user's 
password so you must allow that IP to login directly.




On Tue, Apr 19, 2016 at 10:16 AM, Martin LEUSCH <users@sogo.nu> wrote:

Hi,

I'm trying to configure a SOGo server with Samba and Openchange
support.
All working great except mail synchronization between Openchange's
folders and Dovecot's folders.
In Outlook, INBOX is empty but there are some emails (I can see
emails
from the web interface, IMAP or Activsync) and I can see emails sent
from Outlook in Sent folder in Outlook but not from others sources.
There is no error reported by Outlook and logs for Apache (for
rpcproxy)
or Samba (for MAPI) seems OK.
Every things else work great.

Any ideas?

    -- 
Martin Leusch

Service Technique IMEREOS
sce.t...@imereos.fr <mailto:sce.t...@imereos.fr>

-- 
users@sogo.nu <mailto:users@sogo.nu>

https://inverse.ca/sogo/lists

--
users@sogo.nu
https://inverse.ca/sogo/lists


--
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] INBOX empty in Outlook with OpenChange

2016-04-19 Thread Martin LEUSCH

Hi,

I'm trying to configure a SOGo server with Samba and Openchange support.
All working great except mail synchronization between Openchange's 
folders and Dovecot's folders.
In Outlook, INBOX is empty but there are some emails (I can see emails 
from the web interface, IMAP or Activsync) and I can see emails sent 
from Outlook in Sent folder in Outlook but not from others sources.
There is no error reported by Outlook and logs for Apache (for rpcproxy) 
or Samba (for MAPI) seems OK.

Every things else work great.

Any ideas?

--
Martin Leusch
Service Technique IMEREOS
sce.t...@imereos.fr

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Some users Can't login since upgrade toV3

2016-04-05 Thread Martin Simovic


> On 05 Apr 2016, at 09:59, Carles Christophe 
> (christophe.car...@ibcg.biotoul.fr) <users@sogo.nu> wrote:
> 
> I have reset browser cache, change work station, make test on over OS, it's 
> allways the same : white page.
> 

Not sure somebody mentioned it here, but have you tried to restart memcached?

Regards
Martin.



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Exchange 2003 -> Sogo

2016-04-01 Thread Martin Simovic
Hi Sergey

> On 01 Apr 2016, at 15:27, sergey (sergey.glad...@gmail.com) <users@sogo.nu> 
> wrote:
> 
> Friends, I've got the issue of migration with the exchange 2007 to Sogo. In
> particular, do you have someone experience?
> If i configure a Sogo, in parallel with the exchange 2007, there can be
> problems connecting users to AD? As I understand it the AD should synchronize
> with the samba 4

You don’t need to synchronise users at all. You can use your existing AD as an 
authentication source (pointing SOGo in sogo.conf to your AD DC).

Best,
Martin.





smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Exchange 2003 -> Sogo

2016-03-15 Thread Martin Simovic
Hi

> On 15 Mar 2016, at 17:19, EFEKT PAWKI <pawec...@gmail.com> wrote:
> 
> Hello.
> Now Exchange 2003 is running on multihomed SBS without a problem on a wooden 
> server - AMD 2x2,2Ghz, 3,5GB RAM (32bit os) with AD, DNS, DHCP, VPN without a 
> problem and performance problems.
> All users files take abut 60GB on server. Archives are out of server on PST 
> files - so outside server.
> You think I have to test it before I will switch whole company? 32+GB RAM 
> will need sogo to run same amount of data? 

Yes - if you plan to use ActiveSync. Alternatively, you can:

1. Not use Outlook. Options left are: Thunderbird + SOGo Connector or Webmail 
client.
2. Use Outlook configured for IMAP. Use some sort of CalDav/CardDav sync tool 
to enable calendars/contacts support.
3. Use Outlook configured for MAPI. For this you need SOGo + Openchange. 
Openchange is an element that enables (in conjunction with SOGo) native Outlook 
support. This, however requires IMO even more testing then EAS. I personally 
don’t know anyone that runs Openchange in production without issues.

> 
> As another option I take Zimbra with z-push - I will have to force them to 
> use Zimbra desktop instead of Outlook.
> Best regards. Pawka

Don’t know anything about Zimbra. Tested Zarafa in the past, with mixed 
results. Good luck forcing your users out of Outlook ;-)

Hope this helps,
Best Regards

Martin.
> 
> 2016-03-10 16:44 GMT+01:00 Martin Simovic <mar...@netson.sk 
> <mailto:mar...@netson.sk>>:
> Hi,
> 
> I recommend you test your setup before the actual migration. ActiveSync can 
> be very resource demanding, especially with large mailboxes. At the moment, 
> every EAS connection requires a separate sogod process, which in your case 
> means you need 32+ GB RAM - assuming your users use Outlook only (and not the 
> phone, etc.) Add one more device per user (e.g. Android phone) and amount of 
> required RAM duplicates.
> 
> Best Regards
> Martin.
> 
>> On 10 Mar 2016, at 15:36, EFEKT PAWKI <pawec...@gmail.com 
>> <mailto:pawec...@gmail.com>> wrote:
>> 
>> Hello.
>> I have to migrate from Exchange 2003 to something else.
>> My users will kill me if I force them to switch from MS Outlook to something 
>> else.
>> 
>> How Sogo behave with account with a lot of data using Active Sync protocol?
>> Especially owner of company - he have 5GB of OST and 45 in PST.
>> 
>> Calendar is full of meettings etc...
>> Will Sogo be able to work fluently with such amount of data?
>> There will be about 100 mailboxes.
>> Best regards. Pawel
>> -- 
>> users@sogo.nu <mailto:users@sogo.nu>
>> https://inverse.ca/sogo/lists <https://inverse.ca/sogo/lists>
> 
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Exchange 2003 -> Sogo

2016-03-11 Thread Martin Simovic
Hi,

> On 11 Mar 2016, at 13:08, Quique <quique...@gmail.com> wrote:
> 
> Hello Martin,
> 
> With OpenChange, you will have support from Outlook 2003 to Outlook 2010. 
> There are users in production with OpenChange. There are rough edges but for 
> a normal usage it will work.

Is automatic Inbox refresh triggered on new mail arrival working? Last time I 
checked it wasn’t.

Best,
Martin.

smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Exchange 2003 -> Sogo

2016-03-10 Thread Martin Simovic
Hi Steve,

You are right - my suggestion does not involve openchange at all. Openchange 
would be certainly better option, but do you know anyone who has *working* 
openchange setup? In production?

Best Regards
Martin.

> On 10 Mar 2016, at 17:08, Steve Ankeny <stev...@cinergymetro.net> wrote:
> 
> Martin . . .
> 
> Am I right in understanding your suggestion does not involve OpenChange?  
> Would that limit a user to Outlook 2013?  It appears to require a lot of 
> resources to implement, and even then, there appear to be limitations.
> 
> pg. 51-55, SOGo Installation and Configuration Guide
> 
> From my view, this is certainly preferable to using OpenChange
> 
> On 03/10/2016 10:44 AM, Martin Simovic wrote:
>> Hi,
>> 
>> I recommend you test your setup before the actual migration. ActiveSync can 
>> be very resource demanding, especially with large mailboxes. At the moment, 
>> every EAS connection requires a separate sogod process, which in your case 
>> means you need 32+ GB RAM - assuming your users use Outlook only (and not 
>> the phone, etc.) Add one more device per user (e.g. Android phone) and 
>> amount of required RAM duplicates.
>> 
>> Best Regards
>> Martin.
>> 
>>> On 10 Mar 2016, at 15:36, EFEKT PAWKI < 
>>> <mailto:pawec...@gmail.com>pawec...@gmail.com <mailto:pawec...@gmail.com>> 
>>> wrote:
>>> 
>>> Hello.
>>> I have to migrate from Exchange 2003 to something else.
>>> My users will kill me if I force them to switch from MS Outlook to 
>>> something else.
>>> 
>>> How Sogo behave with account with a lot of data using Active Sync protocol?
>>> Especially owner of company - he have 5GB of OST and 45 in PST.
>>> 
>>> Calendar is full of meettings etc...
>>> Will Sogo be able to work fluently with such amount of data?
>>> There will be about 100 mailboxes.
>>> Best regards. Pawel
>>> -- 
>>> users@sogo.nu <mailto:users@sogo.nu>
>>> https://inverse.ca/sogo/lists <https://inverse.ca/sogo/lists>
> 
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Exchange 2003 -> Sogo

2016-03-10 Thread Martin Simovic
Hi,

I recommend you test your setup before the actual migration. ActiveSync can be 
very resource demanding, especially with large mailboxes. At the moment, every 
EAS connection requires a separate sogod process, which in your case means you 
need 32+ GB RAM - assuming your users use Outlook only (and not the phone, 
etc.) Add one more device per user (e.g. Android phone) and amount of required 
RAM duplicates.

Best Regards
Martin.

> On 10 Mar 2016, at 15:36, EFEKT PAWKI <pawec...@gmail.com> wrote:
> 
> Hello.
> I have to migrate from Exchange 2003 to something else.
> My users will kill me if I force them to switch from MS Outlook to something 
> else.
> 
> How Sogo behave with account with a lot of data using Active Sync protocol?
> Especially owner of company - he have 5GB of OST and 45 in PST.
> 
> Calendar is full of meettings etc...
> Will Sogo be able to work fluently with such amount of data?
> There will be about 100 mailboxes.
> Best regards. Pawel
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] OpenChange without Samba

2016-02-17 Thread Martin Simovic
Openchange WILL NOT WORK if Samba is joined to AD as member sever and NOT a DC 
AFAIK. 

--
Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk

> On 17 Feb 2016, at 08:39, Dennis Moebus <dmoe...@3pc.de> wrote:
> 
> Hi all,
> 
> I'm sorry for my late response...
> First of all, thank you for your advices!!!
> 
> I joined my Samba4 Server as a Member to my Windows 2012 AD.
> (https://wiki.samba.org/index.php/Setup_Samba_as_an_AD_Domain_Member)
> This worked without any problems.
> 
> This is my smb.conf, hope this will help :-)
> 
> #
> # Sample configuration file for the Samba suite for Debian GNU/Linux.
> #
> #
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options most of which
> # are not shown in this example
> #
> # Some options that are often worth tuning have been included as
> # commented-out examples in this file.
> #  - When such options are commented with ";", the proposed setting
> #differs from the default Samba behaviour
> #  - When commented with "#", the proposed setting is the default
> #behaviour of Samba but the option is considered important
> #enough to be mentioned here
> #
> # NOTE: Whenever you modify this file you should run the command
> # "testparm" to check that you have not made any basic syntactic
> # errors.
> 
> #=== Global Settings ===
> 
> [global]
> 
>   netbios name = SOGo
>   security = ADS
>   workgroup = 3PC
>   realm = 3PC.LOCAL
> 
>   log file = /var/log/samba/%m.log
>   log level = 1
> 
>   dedicated keytab file = /etc/krb5.keytab
>   kerberos method = secrets and keytab
>   winbind refresh tickets = yes
> 
>   winbind trusted domains only = no
>   winbind use default domain = yes
>   winbind enum users  = yes
>   winbind enum groups = yes
> 
>   # idmap config used for your domain.
>   # Choose one of the following backends fitting to your
>   # requirements and add the corresponding configuration.
>   #  - idmap config ad
>   #  - idmap config rid
>   #  - idmap config autorid
> 
>   ###  Configuration required by OpenChange server ###
>dsdb:schema update allowed = true
>dcerpc endpoint servers = epmapper, mapiproxy, dnsserver
>dcerpc_mapiproxy:server = true
>dcerpc_mapiproxy:interfaces = exchange_emsmdb, exchange_nsp,
> exchange_ds_rfr
>   ### Configuration required by OpenChange server ###
> 
>   mapistore:namedproperties = mysql
>   namedproperties:mysql_user = openchange
>   namedproperties:mysql_pass = *
>   namedproperties:mysql_host = localhost
>   namedproperties:mysql_db = openchange
>   mapistore:indexing_backend =
> mysql://openchange:*@localhost/openchange
>   mapiproxy:openchangedb =
> mysql://openchange:*@localhost/openchange
> 
> ## Browsing/Identification ###
> 
> # Change this to the workgroup/NT-domain name your Samba server will part of
> #   workgroup = WORKGROUP
> 
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
> #   wins support = no
> 
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ;   wins server = w.x.y.z
> 
> # This will prevent nmbd to search for NetBIOS names through DNS.
>   dns proxy = no
> 
>  Networking 
> 
> # The specific set of interfaces / networks to bind to
> # This can be either the interface name or an IP address/netmask;
> # interface names are normally preferred
> ;   interfaces = 127.0.0.0/8 eth0
> 
> # Only bind to the named interfaces and/or networks; you must use the
> # 'interfaces' option above to use this.
> # It is recommended that you enable this feature if your Samba machine is
> # not protected by a firewall or is a firewall itself.  However, this
> # option cannot handle dynamic or non-broadcast interfaces correctly.
> ;   bind interfaces only = yes
> 
> 
> 
>  Debugging/Accounting 
> 
> # This tells Samba to use a separate log file for each machine
> # that connects
> #   log file = /var/log/samba/log.%m
> 
> # Cap the size of the individual log files (in KiB).
>   max log size = 1000
> 
> # If you want Samba to only log through syslog then set the following
> # parameter to 'yes'.
> #   syslog only = no
&g

Re: [SOGo] OpenChange without Samba

2016-02-12 Thread Martin Simovic


> On 12 Feb 2016, at 14:21, André Schild  wrote:
> 
> Am 12.02.2016 um 09:00 schrieb Dennis Möbus:
>> Hey guys,
>> 
>> is it possible to install/configure OpenChange without Samba4 and connect
>> directly to a Windows Server 2012 Domain Controller?
> 
> You can reuse the 2012 Domain for this, but samba 4 has still to be present 
> on the box

Better said, you can join Samba4 to the 2012 Domain as a DC. This will 
replicate information already contained in your existing 2012 managed AD.

M.

smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Postfix + Dovecot + mysql + Sogo

2016-01-29 Thread Martin Simovic
https://workaround.org/ispmail/jessie

Very good and explanatory guide, written for debian but easily adaptable for 
other distribution. Unlike howtoforge, also explains WHY is stuff done, not 
only HOW. 

Regards

--
Martin Šimovič

> On 28 Jan 2016, at 22:05, vadiraj joish <vadirajj...@gmail.com> wrote:
> 
> Dear Sogo team,
> 
> 
> As i am very new to the mail server part, i request you to kindly provide 
> complete set of commands and instruction to be able to get the server up and 
> running. 
> I want to deploy mail server with Redhat/Centos, Postfix, Dovecot, Mysql and 
> Sogo. 
> 
> I have gone through iredmail and other few packages. I prefer to have more 
> control on the setup and options to customize. Hence this request.
> 
> 
> Thank you for your time and response.
> 
> Regard
> Vadiraj Joish
>  
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Why have you choosen SOGO?

2016-01-27 Thread Martin Simovic
Hi,

I have tested many groupware solutions out there, Zimbra, Zarafa amongst 
others. SOGo turned out to be the best. 
SOGo is not perfect. But we struggled to find anything closely as good as SOGo.

SOGo plugs into existing infrastructure (IMAP, SMTP server, Authentication 
backed) and does not try to reinvent the wheel.

Best Regards
Martin.

> On 26 Jan 2016, at 20:46, Chris <chris2...@postbox.xyz> wrote:
> 
> Dear All,
> 
> why have you chosen SOGo? I'm looking for a groupware. SOGo is so far my
> favorite, but there are some other (also free) alternatives. Which
> programs have you tested? What were advantages / disadvantages?
> 
> - Chris
> 
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Duplicate Meeting Invitations

2016-01-21 Thread Martin Simovic
Hi,

> On 20 Jan 2016, at 22:31, Alexander Nimmervoll <n...@technikum-wien.at> wrote:
> 
> Are you sure that SCHEDULE-AGENT=CLIENT is set for the ORGANIZER, I believe 
> it doesn't work if it is set for the ATTENDEES.
> Just right-click an event in SOGo UI and view the raw source.

You are correct, this is how event source looks like:

BEGIN:VCALENDAR
PRODID:-//iCal4OL2.15.6
VERSION:2.0
CALSCALE:GREGORIAN
BEGIN:VEVENT
UID:04008200E00074C5B7101A82E00820EBEDF06154D101000
 01000BB3F451BFC71544BA7770AF2635BC008
LAST-MODIFIED:20160121T153902Z
X-MICROSOFT-TASK:20160121T153902Z
SUMMARY:TEST1
DESCRIPTION:TEST
DTSTAMP:20160121T154041Z
CLASS:PUBLIC
LOCATION:Office
ORGANIZER;CN=Martin Simovic:mailto:msimo...@example1.com
DTSTART;VALUE=DATE:20160122
DTEND;VALUE=DATE:20160123
TRANSP:TRANSPARENT
BEGIN:VALARM
ACTION:DISPLAY
DESCRIPTION:TEST1
TRIGGER;VALUE=DURATION:-PT180M
END:VALARM
ATTENDEE;PARTSTAT=NEEDS-ACTION;ROLE=REQ-PARTICIPANT;SCHEDULE-AGENT=CLIENT;R
 SVP=TRUE;CN=Martin Simovic:MAILTO:mar...@example2.sk
END:VEVENT
END:VCALENDAR
But how do I achieve that SCHEDULE-AGENT=CLIENT is set for organiser?

Many thanks for your help

Best Regards
Martin.



smime.p7s
Description: S/MIME cryptographic signature


[SOGo] Duplicate Meeting Invitations

2016-01-20 Thread Martin Simovic
Hi there,

We are experiencing problem with Duplicate Meeting Invitations being sent to 
attendees. The situation is as follows:

1. Meeting organiser creates meeting via Outlook. Outlook is configured for 
email via IMAP and calendars via CalDAV (iCAL4OL sync tool).
2. Outlook sends a meeting invitation immediately to attendees.
3. As soon as the event gets synced to SOGo via iCAL4OL SOGo sends a meeting 
invitation too.
4. This results in duplicate invitation which is confusing to attendees.

All this seems to be related to the bug 
http://www.sogo.nu/bugs/view.php?id=2599 
<http://www.sogo.nu/bugs/view.php?id=2599>

Is there a fix or workaround available? What is the best approach to this 
problem? SOGo version is 2.3.5-1

Many thanks 

--
Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk <mailto:mar...@netson.sk>


smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Duplicate Meeting Invitations

2016-01-20 Thread Martin Simovic
Hi,

> Dňa 20. 1. 2016 o 18:09, Alexander Nimmervoll <n...@technikum-wien.at> 
> napísal:
> 
> Well SOGo honours the SCHEDULE-AGENT=CLIENT so you have to talk to iCAL4OL if 
> this option can be included there.
> Or you can try our Open Source plugin OutlookCalDavSynchronizer, which has 
> this option as default but also allows to set
> X-SOGO-SEND-APPOINTMENT-NOTIFICATIONS:NO which lets SOGo schedule the meeting 
> without sending a second invite
> (same setting is available in the WEB UI of SOGo).

Thanks for your kind reply. Thing is, that iCAL4OL indeed supports 
SCHEDULE-AGENT=CLIENT and I double-checked I have the option enabled.
SOGo itself seems to support this since 2014.

Still, I get duplicate meeting invitations sent when created from Outlook :(

Best Regards
Martin. -- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Fail to login with version 2.3.5-1

2016-01-08 Thread Martin Simovic
You can find older versions of the package in /var/cache/apt/archive or along 
the lines. 

--
Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk

> On 08 Jan 2016, at 19:31, Damien Brémont <damien.brem...@casadevelazquez.org> 
> wrote:
> 
> Hi,
> 
> I keep fighting with my authentication problems.
> But I ail to solve it, and I need to find a solution ASAP.
> 
> is there a way to temporary downgrade to 2.3.4-1?
> 
> sudo apt-get install sogo=2.3.4-1 fails.
> But this version isn't available anymore on the source servers.
> 
> Can I download it somewhere to downgrade?
> 
> O either, do you have any idea to investigate my problems
> 
> Thanks a lot in advance for your help
> 
> Best 
> Damien
> 
> Damien BRÉMONT 
> RESPONSABLE DES SYSTÈMES D'INFORMATION
> ET COMMUNICATION 
> 
>> On 07/01/16 22:22, Damien Brémont wrote:
>> Hi: 
>> 
>> I recently updated my SOGo server from  2.3.4-1 to 2.3.5-1. 
>> 
>> And since the changes, I can't login anymore :( 
>> Before, it was working fine 
>> 
>> I'm using an LDAP authentification. My server is working fine, but I get 
>> rejected with this king of 
>> 
>> When I try with my original configuration, I have the folowing log messages 
>> after a fresh restart 
>> Jan 07 22:11:10 sogod [4264]: [ERROR] <0x0x7fc825ae9360[NGBundleManager]> 
>> could not create bundle for path: 
>> '/usr/share/GNUstep/Libraries/gnustep-base/Versions/1.22/Resources/SSL.bundle'
>> Jan 07 22:11:10 sogod [4264]: [WARN] <0x0x7fc8246bae20[WOxElemBuilder]> 
>> could not locate builders: WOxExtElemBuilder,WOxExtElemBuilder 
>> Jan 07 22:11:10 sogod [4264]: SOGoRootPage Login from '192.168.192.100' for 
>> user 'x...@x.org' might not have worked - password policy: 65535  grace: 
>> -1  expire: -1  bound: 0 
>> Jan 07 22:11:10 sogod [4264]: 192.168.192.100 "POST /SOGo/connect HTTP/1.1" 
>> 403 34/69 0.071 - - 3M 
>> 
>> 
>> I have two sources (openldap) in my configuration 
>> 
>>>   SOGoUserSources = ( 
>>>{ 
>>>   type = ldap; 
>>>   CNFieldName = cn; 
>>>   UIDFieldName = uid; 
>>>   IDFieldName = mail; // first field of the DN for direct binds 
>>>   bindFields = (mail); // array of fields to use for indirect binds 
>>>   baseDN = "ou=x,ou=x,dc=x,dc=org"; 
>>>   bindDN = "uid=x,ou=x,dc=x,dc=org"; 
>>>   bindPassword = x; 
>>>   canAuthenticate = NO; 
>>>   displayName = "Anuario Global"; 
>>>   hostname = ldaps://localhost:636; 
>>>   id = public; 
>>>   isAddressBook = YES; 
>>> }, 
>>> { 
>>>   type = ldap; 
>>>   CNFieldName = cn; 
>>>   UIDFieldName = uid; 
>>>   IDFieldName = uid; // first field of the DN for direct binds 
>>>   bindFields = (uid, mail); // array of fields to use for indirect 
>>> binds 
>>>   baseDN = "ou=x,ou=x,dc=x,dc=org"; 
>>>   bindDN = "uid=x,ou=x,dc=x,dc=org"; 
>>>   bindPassword = x 
>>>   canAuthenticate = YES; 
>>>   hostname = ldaps://localhost:636; 
>>>   id = x; 
>>>   isAddressBook = NO; 
>>> } 
>>>   );
>> 
>> And i'm running an Ubuntu 12.04.5 LTS server 
>> 
>> Sometime I also get this kind of errors 
>> Jan 07 22:15:01 sogod [4264]: [ERROR] <0x0x7fc82601f860[SOGoUserManager]> 
>> Authenticated with multidomain source but login is not an email 
>> 
>> I don't SSL.bundle file, but it seems not to be a pb according to different 
>> forum?? 
>> 
>> So I try to login adding my domain, but nothing 
>> I tried to remove the addressbook, tried to adjust settings, . 
>> Tried to use ldap instead of ldaps... 
>> 
>> In fact I've already tried many things, but I miss ideas... 
>> 
>> So help is welcome 
>> 
>> Thanks in advance 
>> Best 
>> Damien
> 
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Installing on Debian from source

2016-01-07 Thread Martin LEUSCH

Hi,

It's look like your system use systemd.
Try to reload daemon from systemctl:

   #  systemctl|daemon-reload
   |

Then try to start service from systemd:

   #  systemctl start sogo

Take a look on 
https://wiki.debian.org/systemd#Managing_services_with_systemd for 
common usage of systemd.


   ||

Martin Leusch

Le 06/01/2016 22:40, Pidcam a écrit :

Dear all,

I'm trying to install SOGo on Debian (armbian) on a armhf processor. 
But I cannot find a package. Therefore I try to install from source.


So I successfully compiled SOGo by

cd /tmp/SOPE
./configure --with-gnustep --enable-debug --disable-strip
make
make install

cd /tmp/SOGo
./configure --enable-debug --disable-strip
make
make install

Then I copied the sogo.init to /etc/init.d/sogo

But when I start I get

Unit sogo.service failed to load: No such file or directory.

Is this the right way to install? Or do I have to make a .deb package 
and how can I make it?


I see a lot of files in packaging but I don't know how to used it.


--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Repository url for Debian 8?

2016-01-06 Thread Martin Simovic
Hi,

> Dňa 6. 1. 2016 o 8:05, Trepper Thomas <thomas.trep...@blueclaim.com> napísal:
> 
> Thx Martin - is it such a high effort to build 32bit, I always thought it’s 
> an automated process?

Yes - I understand that it is a substantial amount of work required to get (and 
maintain) automated builds working for yet another architecture.

> 
> Is it possible to build by my own? (Even if it is bypassing the idea of a 
> repository?) Or is maybe someone else maintaining a kind of private or back 
> ports repository? 

You can or course build your own deb packages or build SOGo from source and 
install directly. Here you should find instructions about how to build SOGo 
from source: http://www.openchange.org/cookbook/backends/sogo/index.html

> (Upgrading from 32bit to 64bit is not that easy, it’s recommended to do a 
> fresh clean install which is in my case a huge amount of work)

Indeed. Still it is something which you might want to do anyway at some stage.

> 
> Thx in advance and best wishes,
> Thomas

All the best,
Martin


-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Repository url for Debian 8?

2016-01-05 Thread Martin Simovic


> On 05 Jan 2016, at 17:30, Trepper Thomas <thomas.trep...@blueclaim.com> wrote:
> 
> Thanks a lot Christian, 
> 
> I have the same lines and the issue seems to be, that it cannot find 32bit. 
> Why is it only 64bits?
> 
> Thomas

32-bit is so rare to find on servers these days that SOGo team decided to 
provide 64-bit packages only.
I came across this problem with other vendors too, (e.g. Dell OMSA) so upgraded 
all servers to 64bit OS.

Best Regards
Martin.

smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Mini Admin Panel Survey

2015-12-15 Thread Martin Simovic


> On 15 Dec 2015, at 15:00, Michel Memeteau <cont...@ekimia.fr> wrote:
> 
> 
> 
> Le 15/12/2015 10:53, Martin Simovic a écrit :
>> I am asking myself … is there any reason not to use samba4 as authentication 
>> backend and use samba-tool + ldap-utils, or if you require GUI Windows RSAT 
>> tools?
>> 
> Concerning me, We use Sogo/ldap for cloud based email and don't go for 
> outlook support right now, so avoiding Samba4 support seemed a simpler option 
> but I might be wrong.

Samba4 is perfect authentication backend IMO, so no need to re-invent the 
wheel. Even if you don’t use/need native Outlook support now, you might want to 
add it later, with samba4 you’d just extend the ldap schema and you’re fine to 
go. With any other backend (openldap, mysql ..) you’d have to migrate existing 
users beforehand … this might be a pain since it *could* involve password 
changes which, if you have 100+ users … 

Regards
M.

smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Exchange Apple

2015-12-03 Thread Martin Simovic
Hi,

> On 03 Dec 2015, at 07:17, FoxNET Support <i...@foxnet.be> wrote:
> 
> Is Sogo is compatible with Exchange Apple? Since the release of ElCapitan, 
> the Mail application, provides the ability to connect an ActiveSync account, 
> I wonder if it is compatible and how to configure the thank you for your 
> help, Mz

I believe that OS X El Capitan Mail application supports Exchange OWA/EWS 
rather then Exchange Active Sync (EAS). That means that SOGo can not be 
configured for Apple Mail using Exchange option, unless you use SOGo + 
Openchange. 

Still, the preferred way to configure SOGo on OS X would be IMAP for Apple 
Mail, CaLDAV for Calendar and CardDAV for Contacts application. This works well 
and reliably, I am using it myself on El Capitan right now.

Best Regards
Martin.




smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Mailbox migration - Outlook problems

2015-11-20 Thread Martin Simovic
Hi,


> On 20 Nov 2015, at 09:18, petr.sev...@linuxbox.cz wrote:
> 
> Could you give me advice how to migrate user mailboxes to avoid this 
> problems. I have two scenarios of infrastructure:
> - dovecot to dovecot(sogo) 
> - exchange to dovecot(sogo)

Exchange can be accessed via IMAP so in both cases you can use imapcopy or 
imapsync. I used both successfully, whichever you choose is up to you.

Best Regards

--
Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk <mailto:mar...@netson.sk>



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Zentyal packages in Sogo

2015-11-09 Thread Martin Simovic


> On 07 Nov 2015, at 22:09, Johannes Faber <johan...@fundament.org> wrote:
> 
>> The code is available:
>> 
>> https://github.com/zentyal/openchange/tree/master/mapiproxy/services/plugins/dovecot
> 
> What's the trick here?
> 
> Compiling the plugin, enabling and configuring it in dovecot, enabling 
> asyncemsmdb for the mapiproxy so emsmbd does not complain, all leads to 
> "resolver: Not Found" for the plugin. Looking at memcached the neccessary key 
> is never created.
> 
> So I guess this is not the only thing not packaged.

I have got exactly the same problem. Plugin ends up with error message 
resolver: Not Found.

Best Regards
Martin.

smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Zentyal packages in Sogo

2015-11-09 Thread Martin Simovic

> On 05 Nov 2015, at 23:58, Michel Memeteau - EKIMIA <cont...@ekimia.fr> wrote:
> 
>> The difference is that Zentyal COMMERCIAL repository contains a dependency 
>> package which is a dovecot-openchange module. This package is responsible 
>> for notifying openchange about new email arrival and thus triggering mailbox 
>> refresh in outlook.
>> 
>> dovecot-openchange package is not available from other source (SOGo, 
>> Zentyal) only from Zentyal Commercial.
> 
> 
> I'm confused, that would be the first time something goes in Zentyal
> commercial before being in community , why would they do that ?

I believe they do it since it turns commercial version more attractive compared 
to community version.

Best Regards
Martin.



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] activesync mobile device updates

2015-11-07 Thread Martin Simovic
Hi

Rather then expected behaviour, this is a bug. Simply put, if there are too 
many changes (moves, deletes) to the inbox, activesync is unable to catch up, 
resulting in unreal inbox view or duplicates from activesync client. 

Best Regards

--
Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk

> On 07 Nov 2015, at 01:48, Fabian Santiago <fsanti...@garbage-juice.com> wrote:
> 
> Hello,
> 
> I noticed on my iPhone that my email account's inbox, configured as an 
> activesync (exchange) account, with my email server running:
> 
> sogo
> postfix
> Roundcubemail
> Dovecot
> 
> doesn't reflect the massive cleanup I made through my webmail interface, done 
> thru dovecot / roundcubemail.
> 
> If I log into the sogo web ui, all of the changes / moved email are apparent.
> 
> But my phones inbox hasn't reflected the changes until I actually turned my 
> email off / on in mail settings, and then it re-sync'd properly. 
> 
> Am I missing something or is this simply expected behavior?
> 
> Thank you.
> 
> Sincerely,
> 
> Fabian Santiago
> 
> Sent from my iPhone
> 
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Zentyal packages in Sogo

2015-11-05 Thread Martin Simovic
Hi Johannes,

> On 05 Nov 2015, at 13:04, Johannes Faber <johan...@fundament.org> wrote:
> 
> Zentyal and SOGo can do what they want, but it would make things easier to 
> tell people, that they can't expect automatic inbox refresh if they are using 
> the SOGo repositories of OpenChange and don't use EAS or IMAP.
> 
> BECAUSE autorefresh is not working with the Zentyal packages from the SOGo 
> repository.

Yes you’re right, auto refresh does not work. But this problem is not related 
to repository, SOGo repository contains the same packages as Zentyal COMMUNITY.
The difference is that Zentyal COMMERCIAL repository contains a dependency 
package which is a dovecot-openchange module. This package is responsible for 
notifying openchange about new email arrival and thus triggering mailbox 
refresh in outlook.

dovecot-openchange package is not available from other source (SOGo, Zentyal) 
only from Zentyal Commercial.

Best Regards
Martin. 



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] No Joy iOS

2015-11-04 Thread Martin Simovic


--
Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk

> On 04 Nov 2015, at 16:51, Bob Wooldridge <bob.wooldri...@edm-inc.com> wrote:
> 
>> On 11/03/2015 03:18 PM, Martin Simovic wrote:
>> Sure, both calendars and contacts are working fine via CalDAV and CardDAV 
>> (iOS 9.1)
> Are you using SSL?

Yes, with certificate signed by valid CA. 

> 
> -- 
> Bob Wooldridge 
> EDM Incorporated 
> http://www.edm-inc.com
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] No Joy iOS

2015-11-03 Thread Martin Simovic
Sure, both calendars and contacts are working fine via CalDAV and CardDAV (iOS 
9.1)

--
Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk

> On 03 Nov 2015, at 21:22, Bob Wooldridge <bob.wooldri...@edm-inc.com> wrote:
> 
> I have tried several different things I've found on the internet to try and 
> get iPhones and iPad to sync calendars.  The config always appears to work 
> but no calendar events show up.
> 
> Is there anyone out there who has a working iPhone with calendars?
> 
> -- 
> Bob Wooldridge
> EDM Incorporated
> http://www.edm-inc.com
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Zentyal packages in Sogo

2015-10-30 Thread Martin Simovic
Hi,


> On 30 Oct 2015, at 12:46, Johannes Faber <johan...@fundament.org> wrote:
> 
> Hi there,
> 
> what kind of features do the Zentyal OpenChange packages in the Sogo 
> repository provide?
> 
> Do they provide the same features as the free version, where Zentyal removed 
> regular OpenChange features?

Not sure what you mean here. Free version of what? Openchange packages are 
currently built by Zentyal regardless of repository you pull them off (SOGo, 
Zentyal).

What features you thing Zentyal removed from Openchange?! Are you referring to 
the difference between Zentyal Commercial and Zentyal Community edition?

Best Regards
Martin.



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] SOGo and Outlook and samba 4 AD

2015-10-27 Thread Martin Simovic
Hi,

> On 27 Oct 2015, at 08:46, Götz Reinicke - IT Koordinator 
> <goetz.reini...@filmakademie.de> wrote:
> 
> Hi,
> 
> just a short question:
> 
> To use Outlook with SOGo I do need the samba/OpenChange features
> installed? (Share calendars etc …)

Yes. 

> 
> Can I use an existing Samba 4 AD installation for that? (Or add the sogo
> samba as an member?)

You can do either. 

> 
> BTW: Some information on http://wiki.sogo.nu/MS%20Outlook is outdated
> 
> E.g. iCal4OL is not sold anymore.

Unfortunately. Since I haven’t found openchange nor EAS stable enough at the 
time (1 year ago) iCal4OL + IMAP has been our solution for Outlook ever since.

Best Regards
Martin.




smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] SOGo installation with Apache2

2015-10-20 Thread Martin Simovic


> On 20 Oct 2015, at 17:25, Michael Angelozzi <mangelo...@gmail.com> wrote:
> 
> Hi All,
> 
> Firstly, what does SOGo stand for? I have googled intensively and only come 
> up with Society Of  Gas Operators, which I am i sure it does not stand for.
> My guess would be: Super Openexchange Groupware O???

Scalable Open Groupware.

> 
> So I am trying to install SOGo on Ubuntu server 14.04.
> 
> I installed Apache2 which used to serve up a very simple page (as you will 
> see below it is now broken).
> I installed mysql-server.
> I installed Postfix with Dovecot using: sudo apt-get -y install 
> mail-stack-delivery
> I did not install OpenLDAP because at the moment there is just myself in my 
> company. I would rather use a the MySQL database to store the users.
> 
> Then I installed SOGo, and I noticed towards the end of the installation 
> Apache2 fell over:
> Setting up sogo:amd64 (2.3.2-1) ...
> apache2_invoke: Enable configuration SOGo
> Action 'configtest' failed.
> The Apache error log may have more information.
> apache2_reload: Your configuration is broken. Not reloading Apache 2
>  * Starting SOGo sogo [ 
> OK ]
> 
> I checked the Apache log and there was nothing helpful.
> 
> This is what is in the SOGo conf file:
> sudo nano /etc/apache2/conf-enabled/SOGo.conf 
> shows:
> Line 47: ProxyRequests Off
> Line 48: SetEnv proxy-nokeepalive 1
> Line 49: ProxyPreserveHost On
> 
> I ran the following command:
> apachectl configtest
> 
> And got:
> AH00526: Syntax error on line 47 of /etc/apache2/conf-enabled/SOGo.conf:
> Invalid command 'ProxyRequests', perhaps misspelled or defined by a module 
> not included in the server configuration
> Action 'configtest' failed.
> So Commented out line 47, because Off is the default value in the Apache 
> documentation anyway.

Rather commenting stuff out you should enable required apache modules 

a2enmod proxy
a2enmod proxy_http
a2enmod headers

> 
> Then I tried again and this time the same error but for line 49:
> AH00526: Syntax error on line 49 of /etc/apache2/conf-enabled/SOGo.conf:
> Invalid command 'ProxyPreserveHost', perhaps misspelled or defined by a 
> module not included in the server configuration
> Action 'configtest' failed.
> 
> I figured it would be unwise to just keep commenting out stuff.
> Any suggestions?
> 
> The SOGO Installation Guide.pdf page 45 says:
> "The SOGo configuration for Apache is located in /etc/httpd/conf.d/SOGo.conf"
> But I dont have a file there?
> 

This is a location for CentOS. On Ubuntu your config file will be somewhere in 
/etc/apache2/conf-available or /etc/apache2/conf.d/

Regards
Martin.



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Deprovision openchange

2015-10-16 Thread Martin Simovic


> On 15 Oct 2015, at 18:13, Chris Coleman <ch...@espacenetworks.com> wrote:
> 
> 
> 
> On 10/15/2015 10:32 AM, Martin Simovic wrote:
>> 
>> 
>>> On 14 Oct 2015, at 21:06, Chris Coleman < 
>>> <mailto:ch...@espacenetworks.com>ch...@espacenetworks.com 
>>> <mailto:ch...@espacenetworks.com>> wrote:
>>> 
>>> You can try:
>>> sudo openchange_provision --standalone --ignore_already_exists
>> 
>> This command line switch seems to be unimplemented: openchange_provision: 
>> error: no such option: —ignore_already_exists
>> 
>> I am using openchange 3:2.4-zentyal6 package from inverse repository. Maybe 
>> the way to go is to delete the CN=ms-Exch-Access-Control-Map attribute 
>> directly from directory? I am going to find out the hard way ..
>> 
>> Regards
>> Martin.
> Sorry, try --ignore-already-exists (instead of --ignore_already_exists), e.g.
> sudo openchange_provision --standalone --ignore-already-exists

Yes, that works, Thanks. Now I get further but:

root@pdc:~# openchange_provision --standalone --ignore-already-exists
NOTE: This operation can take several minutes
[+] Step 1: Register Exchange OIDs
[+] Step 2: Add Exchange attributes to Samba schema
[+] Step 3: Add Exchange auxiliary classes to Samba schema
[+] Step 4: Add Exchange objectCategory to Samba schema
[+] Step 5: Add Exchange containers to Samba schema
[+] Step 6: Add Exchange *sub* containers to Samba schema
[+] Step 7: Add Exchange CfgProtocol subcontainers to Samba schema
[+] Step 8: Add Exchange mailGateway subcontainers to Samba schema
[+] Step 9: Add Exchange classes to Samba schema
[+] Step 10: Add possSuperior attributes to Exchange classes
No elements to add found in 
/usr/share/samba/setup/AD/oc_provision_schema_possSuperior.ldif
[+] Step 11: Extend existing Samba classes and attributes
No elements to add found in 
/usr/share/samba/setup/AD/oc_provision_schema_modify.ldif
[+] Step 12: Generic Exchange configuration objects
[+] Step 13: Exchange Organization objects
Error: "(64, 'structural objectClass msExchAdminGroup is not a valid child 
class for CN=Administrative Groups,CN=First Organization,CN=Microsoft 
Exchange,CN=Services,CN=Configuration,DC=example,DC=com')" when adding element:

And I continue stuck. Still unable to provision entirely or deprovision either.

Best Regards
Martin.



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Connection error Mail (El Capitan)

2015-10-16 Thread Martin Simovic
Hi,

I am on Capitain but can not see the ActiveSync option in Mail anywhere? Mail 
supports EWS/OWA but not EAS (just like in Yosemite).

Regards
Martin.

> On 16 Oct 2015, at 14:08, FoxNET Support <i...@foxnet.be> wrote:
> 
> Christian, now that El Capitan is up to date and stable it is possible to set 
> this story well connexionn OR SOGo is not compatible with Mac OS X, it is a 
> pity ...
> 
> Thank you
> 
> Michel
> 
> 
>> Le 21 sept. 2015 à 16:42, Christian Mack <christian.m...@uni-konstanz.de> a 
>> écrit :
>> 
>> Hello
>> 
>> Am 17.09.2015 um 17:27 schrieb FoxNET Support:
>>> 
>>> One thing I do not understand, surely you will tell me, El Capitan
>>> is a preview version and it's nothing to do,
>> 
>> Nothing to do for SOGo, as long as OSX El Capitan is not stable.
>> Apple should fix that.
>> 
>> 
>>> but you have not answered my question, why on IOS Mobile 9 is yes, I have 
>>> that to worry.
>>> 
>>> You will tell me is that mobile is the must function normally, okay,
>>> Outlook mobile exists, by cons, Sogo-ActiveSync not working, amazing right?
>>> 
>> 
>> Sorry, but I never used Outlook mobile myself nor do I know anybody
>> using it.
>> 
>> As far as I know, this is a client bought by Microsoft early this year.
>> So it does not have anything to do with Outlook on other platforms.
>> Only the name is alike.
>> 
>> I just skimmed the description of it.
>> There it mentions ActiveSync as syncronisation protocol.
>> So I assume, it should work with SOGo + ActiveSync.
>> 
>> 
>> Kind regards,
>> Christian Mack
>> 
>>> 
>>>> Le 17 sept. 2015 à 13:47, Christian Mack <christian.m...@uni-konstanz.de> 
>>>> a écrit :
>>>> 
>>>> If you really are authenticating, but the authentication information is
>>>> not transfered to SOGo, then this is no Problem of SOGo.
>>>> 
>>>> As El Capitan is a preview version only, it could be a problem with El
>>>> Capitan and your Outlook version.
>>>> You really should contact Apple about that.
>>>> 
>> 
>> 
>> -- 
>> Christian Mack
>> Universität Konstanz
>> Kommunikations-, Informations-, Medienzentrum (KIM)
>> Abteilung Basisdienste
>> 78457 Konstanz
>> +49 7531 88-4416
>> 
> 



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Deprovision openchange

2015-10-15 Thread Martin Simovic


> On 14 Oct 2015, at 21:06, Chris Coleman <ch...@espacenetworks.com> wrote:
> 
> You can try:
> sudo openchange_provision --standalone --ignore_already_exists

This command line switch seems to be unimplemented: openchange_provision: 
error: no such option: —ignore_already_exists

I am using openchange 3:2.4-zentyal6 package from inverse repository. Maybe the 
way to go is to delete the CN=ms-Exch-Access-Control-Map attribute directly 
from directory? I am going to find out the hard way ..

Regards
Martin.

smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Deprovision openchange

2015-10-14 Thread Martin Simovic


> On 14 Oct 2015, at 13:58, Steve Ankeny <stev...@cinergymetro.net> wrote:
> 
> On 10/14/2015 12:25 AM, Chris Coleman wrote:
>> It appears that the openchange.org documentation page is showing an example 
>> of how to setup a zentyal server for an openchange developer to run code 
>> against the server, with  python scripts included to help get it going for 
>> the tutorial.  It seems in a different order but really all it means is you 
>> should do all the things in the sogo PDF setup document for openchange 
>> (native outlook client compatibility PDF) first, which initializes certain 
>> data inside the databases, so that their openchange developer server setup 
>> doesn't produce errors due to uninitialized data.
> 
> forgot to say, I am considering removing ALL of OpenChange (maybe even 
> purging) and starting again
> 
> Would this be the best way around my problem?

Very likely not. Your AD schema has been already altered with Exchange schema 
extensions (introduced by openchange). If this is a test server with not active 
users, I recommend purging samba data (rm /etc/samba/smb.conf, rm -r 
/var/lib/samba/private, rm -r /var/lib/samba/sysvol) and provision new AD 
(samba-tool domain provision). Once you did that, you can run 
openchange_provision —standalone

Best Regards
Martin.

smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Deprovision openchange

2015-10-12 Thread Martin Simovic
I am unable to deprovision openchange with following error:

[+] Step 1: Remove Exchange configuration objects
[!] error while deprovisioning the Exchange configuration objects (32): 
objectclass: Cannot delete CN=C0A,CN=Display-Templates,CN=Addressing,CN=First 
Organization,CN=Microsoft 
Exchange,CN=Services,CN=Configuration,DC=lan,DC=mydomain,DC=com, entry does not 
exist!

Any clues?

Regards
Martin Simovic

> On 12 Oct 2015, at 16:07, Steve Ankeny <stev...@cinergymetro.net> wrote:
> 
> On 10/07/2015 11:23 PM, Chris Coleman wrote:
>> 
>> 
>> On 10/7/2015 4:46 PM, Mario Gruenwald wrote:
>>> Unfortunately this issue is still open. Nobody here who can help me?
>>> 
>>> kindly regards
>>> Mario
>>> 
>>> On Fri, Aug 21, 2015 at 10:15:39AM +0200, Mario Gruenwald wrote:
>>>> Hi
>>>> 
>>>> I guess my openchange config is broken. Therefore i want to cleanup and 
>>>> restart from beginning. Problem is:
>>>> 
>>>> # openchange_provision --deprovision 
>>>> [!] Unable to unregister this server, it's being used for: handling 2 
>>>> mailboxes
>>>> 
>>>> I already searched in documentation and forums without success. There are 
>>>> a 
>>>> lot of commands (openchangeclient, mapiprofile, sogo-tool, ...). I don't 
>>>> know 
>>>> which to use and/or doesn't find the correct options.
>>>> 
>>>> I am even not able to list which users are in openchange and which 
>>>> mailboxes 
>>>> are handled.
>>>> 
>>>> Anyone out there, who can help me?
>>>> 
>>>> regards
>>>> Mario
>> 
>> Mario,
>> Zentyal are the maintainers of openchange.  
>> The exact instructions to deprovision openchange, with explanation, are here:
>> http://labs.zentyal.org/zentyal-openchange-as-an-additional-exchange-server/ 
>> <http://labs.zentyal.org/zentyal-openchange-as-an-additional-exchange-server/>
>> Search in the page for keyword "Step 6".
>> Here is the text, without the screenshots.
>> "Step 6 – Undo the traveled road
>> 
>> If for any reason, you want to uninstall the openchange service, one of the 
>> features added with Zentyal 3.4 is a way to do that. However, to be able to 
>> do it, you should not be using any resource from that server. Basically, you 
>> need to move, disable or remove all mailboxes hosted on it.
>> 
>> OpenChange deprovision fails because there is an active mailbox
>> 
>> Zentyal does not support yet any way to move mailboxes from one server to 
>> other server, so you would need to use Microsoft Exchange tools if you want 
>> to keep those mailboxes. In this guide we are going to just disable it.
>> 
>> OpenChange mailbox deactivation
>> 
>> We are now ready to deprovision OpenChange:
>> 
>> OpenChange deprovision is successful
>> 
>> And we can see that this server is not available anymore from Windows"
>> 
> 
> Was the original poster Mario able to complete the '--deprovision' operation?
> 
> I've not been able to --
> 
> adam@sogo:~$ sudo openchange_provision --deprovision
> [!] Unable to unregister this server, it's being used for: handling 8 
> mailboxes
> adam@sogo:~$
> 
> 



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] ZEG Issue

2015-10-09 Thread Martin Simovic

> On 09 Oct 2015, at 15:49, Gerald Brandt <g...@majentis.com> wrote:
> 
> Hi Martin,
> 
> Awesome, that works.
> 
> Do you know if I can accomplish the same thing with the Windows RSAT tools?  
> Adding user via RSAT has the same issues.
> 
> Gerald

Via RSAT the only possible way is to add user with minimal user information 
first, then change it later. E.g. when adding user ‘jdoe’ you need to set this 
as username / logon name/ and display name too. Once user is created, fill in 
all required attributes (Name, Surname, Display Name, email) as you wish.

Regards
Martin



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Some Questions regarding Contact Fields

2015-10-09 Thread Martin Simovic

> On 09 Oct 2015, at 18:27, Sebastian Pfohl <sebast...@pfohlnet.de> wrote:
> 
> Hello. I'm planning to migrate to Sogo,if this is the right tool for me. But 
> before i must evaluate some things. I have tried the online demo and habe 
> found that there ate some limitations for contacts. 

Migrate from where? What kind of functionality are you expecting to match / 
supersede?

> 
> Is it correct that there are only 2 e-mail fields? It's it possible to sync 
> more than 2 fields with ActiveSync or with Outlook? 

Make sure you test EAS with reasonable amount of data before you call it 
working. I am talking GB’s and thousands of messages here.

> 
> Is it possible to install Sogo on a Shared Webhost where I have only access 
> via FTP?

I think not.

> 
> Are there Skins or Themes available to mimic a more modern look like 
> Outlook.com?

Zentyal has “nicer” theme and I believe that SOGov3 will have one. 

> 
> Can I use a external IMAP and SMTP Server? 

I *think* this should be possible. All three should use the same user 
authentication source though. (which is doable but kind of tricky).

Regards
Martin



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] ZEG Issue

2015-10-09 Thread Martin Simovic
Hi,

> On 08 Oct 2015, at 23:32, Gerald Brandt <g...@majentis.com> wrote:
> 
> Hi,
> 
> I've been having problems with addresses being expanded from 
> em...@example.com to emailfirstn...@example.com and emaillastn...@example.com
> 
> Because of that, the email bounces.
> 
> I've gotten some configs for postfix and dovecot from a sogo user here, but 
> they just don't work for me.
> 
> So I figured, hey, let's see what ZEG does.
> 
> I installed ZEG, logged in and did:
> # samba-tool user add gbr gbr --given-name-Gerald --surname=Brandt
> # openchange-newuser --create gar

Try something like this:

samba tool user add jdoe --use-username-as-cn —given-name=John —surname=Doe 
—mail-address=j...@yourdomain.com <mailto:mail-address=j...@yourdomain.com>

User created this way (CN identical to username) should not give you the 
problems you mentioned.

Best Regards
Martin.




smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] rpcproxy not working with outlook 2007 / 2010

2015-10-05 Thread Martin Simovic
Hi,


> On 04 Oct 2015, at 16:13, <d...@datasoftcomnet.com> <d...@datasoftcomnet.com> 
> wrote:
> 
> Hello all,
> Ive checked thoroughly that outlook is not able to wotj with sogo using native
> mode.
> below are the facts.
> 
> Environment
> Ubuntu LTS trusty, Samba4 native mode., dovecot, postfix,sogo, ocsmanager with
> rpcproxy installed.
> Webmail  - working
> Activesync - working
> IMAP/POP3 - working.
> 
> Outlook 2007/2010 is not able to connect either through IP or name (via hosts
> file) using native MAPI. (does this work on LAN only)
> Outlook 2007/2010 not connecting using Outlook Anywhere either.
> The certificate is a valid paid cert
> this is what I get in the access.log of apache2
> 
> [04/Oct/2015:19:34:51 +0530] "RPC_IN_DATA /rpc/rpcproxy.dll?
> mail.mydomain.com:6004 HTTP/1.1" 401 5757 "-" "MSRPC"
> [04/Oct/2015:19:34:52 +0530] "RPC_OUT_DATA /rpc/rpcproxy.dll?
> mail.mydomain.com:6004 HTTP/1.1" 401 5757 "-" "MSRPC"
> 
> mail.mydomain.com is a placeholder. the 6004 used to be 6002 an hour back so
> it might not be relavent.
> 
> when I use activesync the username is seen
> POST /Microsoft-Server-ActiveSync?
> User=x...@mydomain.com=JF48EU1D7D0LL5QBAWWS3EVDQ0=iPhone=Ping
> HTTP/1.1" 200 825 "-" "Apple-iPhone7C1/1301.404"
> 
> Can someone through some light on this?

I order to help you please post your smb.conf and ocsmanager.ini files. It’d 
also help if you stated how you installed your environment (compiling from 
source, installing from packages - if so, wha is package source (sogo , 
zentyal?)

Regards
Martin.



smime.p7s
Description: S/MIME cryptographic signature


Re: [SOGo] Outlook question . . .

2015-09-28 Thread Martin Simovic
Hi,

> On 25 Sep 2015, at 18:46, Steve Ankeny <stev...@cinergymetro.net> wrote:
> 
> On 09/25/2015 12:16 PM, Martin Simovic wrote:
>> Hi
>> 
>>> On 25 Sep 2015, at 16:43, Steve Ankeny < 
>>> <mailto:stev...@cinergymetro.net>stev...@cinergymetro.net 
>>> <mailto:stev...@cinergymetro.net>> wrote:
>>> 
>>> I am using MariaDB 10.0.21, Ubuntu Trusty 14.04, Dovecot & Postfix, 
>>> OpenChange/OCSManager 2.4
>>> 
>>> What can I do to troubleshoot or resolve this problem?  
>>> OpenChange/OCSManager installed after the recent upgrade but when they're 
>>> initiated by DCERPC calls, they shutdown my Samba AD DC server.
>> 
>> Two questions:
>> 
>> 1. What version of Samba do you use?
>> 2. Have you EVER had working Openchange setup?
>> 
>> Best Regards
>> Martin.
> 
> 1 --
> 
> adam@sogo:~$ sudo apt-cache policy samba
> samba:
>   Installed: 2:4.1.18+dfsg-3~inverse1
>   Candidate: 2:4.1.18+dfsg-3~inverse1
>   Version table:
>  *** 2:4.1.18+dfsg-3~inverse1 0
> 600 http://inverse.ca/ubuntu/ <http://inverse.ca/ubuntu/> 
> trusty/trusty amd64 Packages
> 100 /var/lib/dpkg/status
>  2:4.1.6+dfsg-1ubuntu2.14.04.9 0
> 500 http://us.archive.ubuntu.com/ubuntu/ 
> <http://us.archive.ubuntu.com/ubuntu/> trusty-updates/main amd64 Packages
>  2:4.1.6+dfsg-1ubuntu2.14.04.7 0
> 500 http://security.ubuntu.com/ubuntu/ 
> <http://security.ubuntu.com/ubuntu/> trusty-security/main amd64 Packages
>  2:4.1.6+dfsg-1ubuntu2 0
> 500 http://us.archive.ubuntu.com/ubuntu/ 
> <http://us.archive.ubuntu.com/ubuntu/> trusty/main amd64 Packages
> adam@sogo:~$ 
> 
> 2 --
> 
> I have NEVER had a working OpenChange setup.
> 
> As I said previously, it ran fine all day yesterday until someone attempted 
> to use Outlook.  And, what I mean by that is, "All the appropriate servers 
> and services ran together until I attempted to setup Outlook."
> 
> 

1.This Samba version is not very stable when used together with openchange. 
Version 4.1.17 packaged by Zentyal seems to have much less problems.
2. Does not surprise me. I believe that openchange is not production ready, 
especially not with large mailboxes. Could not get it to sync my 3,5GB mailbox 
reliably ever.

Regards
Martin.


-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Outlook question . . .

2015-09-25 Thread Martin Simovic
Hi

> On 25 Sep 2015, at 16:43, Steve Ankeny <stev...@cinergymetro.net> wrote:
> 
> I am using MariaDB 10.0.21, Ubuntu Trusty 14.04, Dovecot & Postfix, 
> OpenChange/OCSManager 2.4
> 
> What can I do to troubleshoot or resolve this problem?  OpenChange/OCSManager 
> installed after the recent upgrade but when they're initiated by DCERPC 
> calls, they shutdown my Samba AD DC server.

Two questions:

1. What version of Samba do you use?
2. Have you EVER had working Openchange setup?

Best Regards
Martin.-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Samba backend question

2015-09-24 Thread Martin Simovic
Hi

samba-tool has these options, invoke help to list all of them. 

--

Martin Šimovič

NETSON s.r.o.
Mlynská 2238
934 01 Levice
tel: +421 915 393 570
mail: mar...@netson.sk

Dňa 24. 9. 2015, o 1:12, Paul van der Vlis <p...@vandervlis.nl> napísal:

> Hello,
> 
> I am trying to use Sogo with Samba backend. I've created a user with
> samba-tool and it works for authentication.
> 
> But samba-tool does not have options to set the mail address and the
> common name. I've changed those settings using ldapmodify, but is this
> really the good way to do this?
> 
> With regards,
> Paul van der Vlis.
> 
> 
> 
> 
> -- 
> Paul van der Vlis Linux systeembeheer Groningen
> https://www.vandervlis.nl/
> 
> -- 
> users@sogo.nu
> https://inverse.ca/sogo/lists


smime.p7s
Description: S/MIME cryptographic signature


  1   2   3   4   5   6   7   8   9   >