Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Thank you for that suggestion, I will expeditiously follow up! On Saturday, 13 March 2021 at 14:05:03 UTC+13 gjr80 wrote: > So you are back using the original Envoy that was 'tripping the fuse'? > Regards the two beeps from the Envoy I understand the first indicates > successful startup of

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

So you are back using the original Envoy that was 'tripping the fuse'? Regards the two beeps from the Envoy I understand the first indicates successful startup of the processor and the second verifies the installation of the logger so it seems your single beep does point to an issue with the

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

A big THANK YOU to all who helped me out on this, I really appreciate the help and guidancesorry it turned into a wild goose chase! On Friday, 12 March 2021 at 16:24:28 UTC+13 monmul wrote: > Yep fully functional againupdating on the website...WTF!.are these > things sent to us to

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Yep fully functional againupdating on the website...WTF!.are these things sent to us to just test our patience!! On Friday, 12 March 2021 at 13:30:30 UTC+13 monmul wrote: > Hmmm! even more curiouserI notice from my webpage that data was > collected and posted yesterdayafter

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Hmmm! even more curiouserI notice from my webpage that data was collected and posted yesterdayafter having nothing updated for almost 2 weeks! On Friday, 12 March 2021 at 13:06:27 UTC+13 monmul wrote: > So, if it is the RPi then it is either a sofward corruption on the card > caused

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

So, if it is the RPi then it is either a sofward corruption on the card caused by the repeated rebooting after the fuse tripsor else some hardward failure on the board was the cause of the tripping. Its strange that since reassembling the Envoy, RPi etc there has not been a fuse trip. One

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ wee_device --clear-memory Using configuration file /etc/weewx/weewx.conf Using Vantage driver version 3.2.1 (weewx.drivers.vantage) Proceeding will erase all archive records. Are you

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

So, having put the old Envoy back on the Rpi (having shown it worked on the PC) this is what I getlooks like some kind of continuous Loop situation. pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ sudo minicom -b 19200 -D

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

But from the tests on my PC, it seems the old Envoy is workingdoes it not.(so we do not have to worry about the new Envoy for now!)...so it would appear as if the RPi is the culpithave I deducted correctly? On Friday, 12 March 2021 at 02:29:03 UTC+13 tke...@gmail.com wrote: > They did,

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

They did, but it was about 7 or 8 years ago. You really need to call Davis. On Wed, Mar 10, 2021 at 7:22 PM Graham Eddy wrote: > i do recall that davis introduced an incompatability between old firmware > and new datalogger but i don’t recall the details. i’m sure a search of the > forum

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

i do recall that davis introduced an incompatability between old firmware and new datalogger but i don’t recall the details. i’m sure a search of the forum archive would see if that was relevant > On 11 Mar 2021, at 2:17 pm, monmul wrote: > > Yes I am using the original data logger and cable

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Yes I am using the original data logger and cable that came with the old EnvoyI take out the data logger from he old one and put it in the new one...I suspect that the data logger may not be compatible with the new Envoy.the new one was purchased about 3 years ago and was just put in

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

how much is ‘new’ and much much ‘old’? i.e. with the new envoy, are you using the old known-working data logger and cable? > On 11 Mar 2021, at 2:09 pm, monmul wrote: > > New Envoy shows no response to TEST or NVER...so that one is definately dead > I think! -- You received this message

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

I notice the old Envoy beeps twice when I plug it in but the new one only beeps once. On Thursday, 11 March 2021 at 16:01:11 UTC+13 monmul wrote: > New Envoy shows no response to TEST or NVER...so that one is definately > dead I think! > > On Thursday, 11 March 2021 at 15:39:36 UTC+13

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

New Envoy shows no response to TEST or NVER...so that one is definately dead I think! On Thursday, 11 March 2021 at 15:39:36 UTC+13 monmul wrote: > "WRD"<0x12><0x4d>, ACK .not sure hot to use this commandis it just > "WRD"? > This is the old Envoy > > No data as such comes

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

"WRD"<0x12><0x4d>, ACK .not sure hot to use this commandis it just "WRD"? This is the old Envoy No data as such comes backherefrom the first "TEST" is the result of all the commands above in turn. TEST OK 2363 7 0 1316 1 OK

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Ok, that sounds promising. Was that the old or the new Envoy? FYI the other testing commands are: Testing commands "TEST" Sends the string “TEST\n” back. "WRD"<0x12><0x4d>, ACK Responds with a weather station type that is backward compatible with earlier Davis weather products. "RXCHECK"

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

j@pj-selgbuild:~$ sudo lsof /dev/ttyUSB0 lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs Output information may be incomplete. lsof: WARNING: can't stat() fuse.pcloud file system /tmp/.mount_pcloudpeaisz Output information may be incomplete. lsof: WARNING:

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Hmm! nothiing shows...I have a USB port plugged into this pc...and none of the USBs show?!?! pj@pj-selgbuild:~$ sudo lsof /dev/ttyUSB0 [sudo] password for pj: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs Output information may be incomplete. lsof: WARNING:

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Someone who has seen the light! :) On Tuesday, 9 March 2021 at 18:27:36 UTC+10 monmul wrote: > Thanks, I only have Ubuntuand I use VNC client. > > > > On Tuesday, 9 March 2021 at 21:22:57 UTC+13 David wrote: > >> PuTTY (https://www.putty.org/), which is a free SSH/telnet client works >>

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Been MS free since 2008. Never used Apple. Got Lineage on my phone. On Tuesday, 9 March 2021 at 21:55:46 UTC+13 gjr80 wrote: > Someone who has seen the light! :) > > On Tuesday, 9 March 2021 at 18:27:36 UTC+10 monmul wrote: > >> Thanks, I only have Ubuntuand I use VNC client. >> >> >> >>

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Thanks, I only have Ubuntuand I use VNC client. On Tuesday, 9 March 2021 at 21:22:57 UTC+13 David wrote: > PuTTY (https://www.putty.org/), which is a free SSH/telnet client works > on Windows devices and can also connect to serial devices. > > -- > David > > On Tue, Mar 9, 2021 at

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

PuTTY (https://www.putty.org/), which is a free SSH/telnet client works on Windows devices and can also connect to serial devices. -- David On Tue, Mar 9, 2021 at 5:15 PM monmul wrote: > Cool, thanks, will get on that with my laptop in the next day or > sothank you! > > On Tuesday, 9 March

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Cool, thanks, will get on that with my laptop in the next day or sothank you! On Tuesday, 9 March 2021 at 19:37:16 UTC+13 gjr80 wrote: > Anything will do, no grunt needed, all you need is a terminal program of > some sort, minicom will do the job on anything Linux. Windows used to come >

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Anything will do, no grunt needed, all you need is a terminal program of some sort, minicom will do the job on anything Linux. Windows used to come with some sort of terminal program. Not sure about a Mac. Certainly no need to install WeeWX, you just want to run the connectivity test with your

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Hmmm! the only spare RPI I have at the moment is a 3A+ is that likely to have enough grunt to do the job? Oh! do you mean I could attach the "new" Envoy to a PC (running Ubuntu) and do the connectivity test? On Tuesday, 9 March 2021 at 18:47:15 UTC+13 gjr80 wrote: > Possibly, but if you are

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Possibly, but if you are using the same RPi with the same cable as you have used with your new unresponsive Envoy then perhaps the issue is with the RPi or the cable. I would be looking for another RPi or PC (Windows (ugh), Mac or whatever) and run a terminal window/program and do the basic

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Is this telling me that my "old" Envoy is indeed broken? pi@WeatherPi:~ $ wee_device --clear-memory Using configuration file /etc/weewx/weewx.conf Using Vantage driver version 3.2.1 (weewx.drivers.vantage) Unable to wake up console... sleeping Unable to wake up console... retrying Traceback (most

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

*WeeWX generates HTML pages, but it does not update them * On Sat, Mar 6, 2021 at 10:27 PM monmul wrote: > Even curiouserthe photo which is supposed to

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Even curiouserthe photo which is supposed to update every 20 minutes does updatebut not the weather data...still stuck on 21/2/2021 www.wilsonbayweather.com On Sunday, 7 March 2021 at 19:25:07 UTC+13 monmul wrote: > Mar 7 19:20:15 WeatherPi weewx[789] DEBUG weewx.drivers.vantage:

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Mar 7 19:20:15 WeatherPi weewx[789] DEBUG weewx.drivers.vantage: Getting archive packets since 2021-02-21 08:00:00 NZDT (1613847600) Mar 7 19:20:18 WeatherPi weewx[789] DEBUG weewx.drivers.vantage: Retry #0 failed Mar 7 19:20:18 WeatherPi weewx[789] DEBUG weewx.drivers.vantage: Rude wake up

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Weather Underground also not updating and showing station as offline.Hmmm! On Sunday, 7 March 2021 at 19:17:32 UTC+13 monmul wrote: > Hmmm! while it appears to be working with the "old" Envoy (if my reading > of the log is correct)..the website is not updatingso I am > wondering

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Hmmm! while it appears to be working with the "old" Envoy (if my reading of the log is correct)..the website is not updatingso I am wondering if any data is getting through! On Sunday, 7 March 2021 at 18:45:08 UTC+13 monmul wrote: > OK, so I decided to put the "old" Envoy back on

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

OK, so I decided to put the "old" Envoy back on the one that seemed to be causing the tripping of the fuse (the fuse has not tripped since I took this "old" Envoy out...It now looks as if the "old" Envoy is working..is that what this log is saying? Weird or what? Mar 7 18:33:48

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Nothing that we haven't seen before: your RPi cannot connect with the logger. On Fri, Mar 5, 2021 at 7:18 PM monmul wrote: > Thanks for that, I will get around to setting up another Pi in a few days. > In the meantime, does this give us any useful information > > Mar 6 12:53:29 WeatherPi

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Thanks for that, I will get around to setting up another Pi in a few days. In the meantime, does this give us any useful information Mar 6 12:53:29 WeatherPi weewx[870] INFO __main__: Using configuration file /etc/weewx/weewx.conf Mar 6 12:53:29 WeatherPi weewx[870] INFO __main__: Debug is 1

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Yes, you definitely have a connectivity problem that has nothing to do with WeeWX. There is an outside chance the problem is with your RPi. If you have an extra RPi around, try using it to connect through minicom. If nothing works, a call to Davis is in order. -tk On Fri, Mar 5, 2021 at 5:00 PM

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

So everything reseated and restarted...unplugged USB to ensure that the Pi was seeing the USB..used "screen /dev/ttyUSB0 19200" after shutting down weewxstill blank screen (after a number Enters) with no echo back to TEST and NVR On Friday, 5 March 2021 at 17:29:45 UTC+13 monmul wrote:

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ lsusb Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash drive Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

or just note which /dev/ttyUSB* comes and goes once identified i like to put in a udev rule to create a known device file such as /dev/vp2 > On 5 Mar 2021, at 12:33 pm, vince wrote: > > One good way to identify a USB device is to unplug it, plug it back in, and > see what the 'dmesg' command

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

One good way to identify a USB device is to unplug it, plug it back in, and see what the 'dmesg' command reported.You'll tend to be able to figure out which USB port it connected to that way. -- You received this message because you are subscribed to the Google Groups "weewx-user" group.

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

The device "Future Technologies" is probably your Envoy. On Thu, Mar 4, 2021 at 1:35 PM monmul wrote: > Not using serial...using USB. > > On Friday, 5 March 2021 at 10:34:32 UTC+13 monmul wrote: > >> pi@WeatherPi:~ $ lsusb >> Bus 001 Device 006: ID 0403:6001 Future Technology Devices

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Not using serial...using USB. On Friday, 5 March 2021 at 10:34:32 UTC+13 monmul wrote: > pi@WeatherPi:~ $ lsusb > Bus 001 Device 006: ID 0403:6001 Future Technology Devices International, > Ltd FT232 Serial (UART) IC > Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash >

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ lsusb Bus 001 Device 006: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash drive Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 003: ID 0424:ec00

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Well, if you're sure you have the right port (/dev/ttyUSB0), and you have correctly completed the test (a couple of enters, followed by ENTER, all caps) and you got nothing back, then that is as definitive a test that I know of that you have a connectivity problem. Do you have a USB version of

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Yes, apologieswas in a rush typing and did not review."new envoy"..it should be...and "initiation" is the other typo! On Friday, 5 March 2021 at 08:33:36 UTC+13 gjr80 wrote: > ‘new’ envoy? > > Gary > > On Friday, 5 March 2021 at 01:39:10 UTC+10 tke...@gmail.com wrote: > >> What do

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

‘new’ envoy? Gary On Friday, 5 March 2021 at 01:39:10 UTC+10 tke...@gmail.com wrote: > What do you mean by "net Envoy"? If you are using a serial port like > /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a > network connector. Or, are you using an IP logger? > > On

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

‘new’ logger? Gary On Friday, 5 March 2021 at 01:39:10 UTC+10 tke...@gmail.com wrote: > What do you mean by "net Envoy"? If you are using a serial port like > /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a > network connector. Or, are you using an IP logger? > > On

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

What do you mean by "net Envoy"? If you are using a serial port like /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a network connector. Or, are you using an IP logger? On Wed, Mar 3, 2021 at 8:38 PM monmul wrote: > I have not had time to do the reseating

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

After reseating, I get the exact same as before. pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ sudo killall screen screen: no process found pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 lsof: WARNING: can't stat() fuse.gvfsd-fuse

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

I have not had time to do the reseating yethopefully later today. One thing strikes me (probably becuase it has been so long since I set it up) I just switched envoys, how does the net envoy know what to do...I have not gone to any itiation or set up page etcI just plugged and supposed

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Thank you, I will give that a try! On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote: > Reseat means to remove the logger from the Envoy and then reinstall the > logger in the Envoy. Sometimes you can get a dodgy connection between pins > on the logger and the socket in the Envoy (or

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Reseat means to remove the logger from the Envoy and then reinstall the logger in the Envoy. Sometimes you can get a dodgy connection between pins on the logger and the socket in the Envoy (or console) and remaking the connection by reseating can sometimes fix this. Gary On Sunday, 28

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Sorry, I don't quite understand what you mean by "reseat"? On Sunday, 28 February 2021 at 14:40:11 UTC+13 tke...@gmail.com wrote: > You can try reseating the logger. > > On Sat, Feb 27, 2021 at 5:16 PM monmul wrote: > >> Neither TEST nor NVER returns anythingso, I guess I have a >>

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

You can try reseating the logger. On Sat, Feb 27, 2021 at 5:16 PM monmul wrote: > Neither TEST nor NVER returns anythingso, I guess I have a > connectivity problemwhich seems strange as I did a straight swap out > of the Envoys! > > On Sunday, 28 February 2021 at 13:33:34 UTC+13

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Neither TEST nor NVER returns anythingso, I guess I have a connectivity problemwhich seems strange as I did a straight swap out of the Envoys! On Sunday, 28 February 2021 at 13:33:34 UTC+13 tke...@gmail.com wrote: > If the cursor went down the screen, then the console is sending

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

If the cursor went down the screen, then the console is sending something back. Make sure you press a few times, then "TEST", all in capital letters. You can also type "NVER". Again, all in capital letters. This will return the firmware version number. If neither of those work, then you have a

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

The screen shows blank when I get to the point above.after hitting enter a few times, it just sends the cursor down the screen..I tried typing TEST but no response...just a dark screen in the CL window. On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: > That’s a better

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

That’s a better start, did you hit enter a few times and then send TEST as per the wiki article ? You should get a response from the Envoy. Gary On Sunday, 28 February 2021 at 08:04:10

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 minicom: cannot open /dev/ttyUSB0: Device or resource busy pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ sudo killall screen pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 lsof:

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Monmul, we have not definitively heard whether or not you are able to do the test listed under *Establishing connectivity * in the Wiki.That is an essential first step. Use either screen or

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx weather system... Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Initializing weewx version 4.4.0 Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Using Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516]

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

So go ahead and restart it now. On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul wrote: > pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop > [ ok ] Stopping weewx (via systemctl): weewx.service. > pi@WeatherPi:~ $ sudo killall screen > screen: no process found > pi@WeatherPi:~ $ sudo lsof

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ sudo killall screen screen: no process found pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs Output

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

vnc makes no relevant difference. command = ‘screen’ below shows program ‘screen’ has a ‘pi’ user process open on /dev/ttyUSB0 at the moment. not weewxd. probably left over from earlier troubleshooting. kill it with “sudo killall screen”. check if any weewxd’s or screen’s hanging around with “ps

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

I don't know, I'm a SSH only person, I am getting out of my depth now. Gary On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul wrote: > I am using VNC Viewer (and always have) rather than SSHnot sure if > that makes any difference? > > On Thursday, 25 February 2021 at 19:13:29 UTC+13

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

I am using VNC Viewer (and always have) rather than SSHnot sure if that makes any difference? On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 wrote: > Hmm, different to my Davis on my RPi which shows weewxd rather than > screen. I will have to defer to Tom or someone who knows about

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Hmm, different to my Davis on my RPi which shows weewxd rather than screen. I will have to defer to Tom or someone who knows about screen. Gary On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul wrote: > pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop > [ ok ] Stopping weewx (via systemctl):

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs Output information may be incomplete. COMMAND PID USER FD TYPE DEVICE

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

I thought it was installed by default on RPi OS but seems lt it is not - it works on my RPi, I must have installed it manually. Try: $ sudo apt update $ sudo apt install lsof then try running lsof. Gary On Thursday, 25 February 2021 at 14:19:30 UTC+10 monmul wrote: > pi@WeatherPi:~ $ sudo

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ lsof /dev/ttyUSB0 bash: lsof: command not found pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 minicom: cannot open /dev/ttyUSB0: Device or resource busy pi@WeatherPi:~ $ lsof

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Try prefixing lsof with sudo. Gary On Thursday, 25 February 2021 at 14:15:17 UTC+10 monmul wrote: > pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop > [ ok ] Stopping weewx (via systemctl): weewx.service. > pi@WeatherPi:~ $ lsof /dev/ttyUSB0 > bash: lsof: command not found > pi@WeatherPi:~ $

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ lsof /dev/ttyUSB0 bash: lsof: command not found pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 minicom: cannot open /dev/ttyUSB0: Device or resource busy pi@WeatherPi:~ $ lsof

Re: [weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Make sure you stop weewx first before trying minicom. There cannot be anything else using the port. To see what devices are using a port: *lsof /dev/ttyUSB0* On Tue, Feb 23, 2021 at 9:19 PM monmul wrote: > No change in USB port. > > pi@WeatherPi:~ $ > pi@WeatherPi:~ $ minicom -b 19200 -D

[weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

No change in USB port. pi@WeatherPi:~ $ pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 minicom: cannot open /dev/ttyUSB0: Device or resource busy pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop [ ok ] Stopping weewx (via systemctl): weewx.service. pi@WeatherPi:~ $ minicom -b 19200 -D

[weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

OK, so WeeWX cannot connect to your Envoy, I am no Envoy expert but I am told they behave just like a console. First thing I would do is test connectivity from your RPi to the Envoy. Any chance the Envoy is now on a different USB port? Not sure if you remember the Establishing connectivity

[weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Feb 22 22:39:02 WeatherPi systemd[1]: Starting LSB: weewx weather system... Feb 22 22:39:03 WeatherPi weewx[24960] INFO __main__: Initializing weewx version 4.4.0 Feb 22 22:39:03 WeatherPi weewx[24960] INFO __main__: Using Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516]

[weewx-user] Re: Replaced Davis Envoy (tripping) and replaced with another - no connection

Hi, We need to see the log from when you try starting WeeWX. Restart WeeWX and let it run for an archive period or two, then goto the log and take an extract from when WeeWX was restarted through until the two archive periods have passed. Post the log back here without alteration. It’s