Re: [WISPA] Ceragon, Dragonwave and whatelse?

Wella couple of notes... I personally would use an all ODU version because it makes servicing a breeze and also swapping out a bad radio quick and simple. No guessing about is it the indoor unit, is it the outdoor unit, is it the interface cable??? Get an all ODU like the Dragonwave

[WISPA] Think Personal Disaster Recovery..... (was... PING)

I think it is important to note something here. For all you guys out there that are running their business, or any business for that matter, an event like this could easily shut down your business. Think about the situation at hand. You own a business and a good part of it revolves around

Re: [WISPA] Tower accident

That's correct. Not required if there is a cage around the ladder. I would still use one though 3-dB Networks wrote: I'll confirm that... the cage is supposed to prevent you from actually falling... so it is consider fall restraint and no other protection is technically needed (although

Re: [WISPA] Tower accident

In the eye of the government the fall arrest cable system must meet the design requirement of the ladder it serves. S... You can't really just throw up a cable system on a ladder and use it. It needs to be designed so it will meet all the fall requirements, anchor standards, etc, etc.

Re: [WISPA] Do you provide backup services?

Wow Bitch and complain about WISPA's position and actions (your view) and complain about sucking up for federal funds but you are real quick to use this WISPA sponsored and paid for list for your own self benefit. Talk about self-righteous bullshit! Practice what you preach dude! Go jump

[WISPA] Tower Info FYI

http://www.agl-mag.com/newsletter/Sept_16_Federal.htm WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List:

Re: [WISPA] coax cables

Dude That is not what I was commenting on. You made the following blanket statement regarding radio links and waveguide: If you have any distance at all to go, and you want it to work, you have no choice. That is the statement YOU made with your 5 million years of experience. THAT statement

Re: [WISPA] Fwd: Dateline NBC Special on TowerDogs

Can't be any worse than it is right now.like $104 per $100 of salary in NY -B- On 7/18/08 12:19 AM, Larry Yunker [EMAIL PROTECTED] wrote: according to figures cited by OSHA, these so-called tower dogs have the highest death rate per capita of any occupation in the country OUCH!!! I

Re: [WISPA] Lightning Surge Suppressers

At $10 each its probably a lot easier and safer to just replace the tube when in doubt. A whole new arrestor is only $25! On 5/20/08 3:39 PM, Chuck McCown - 2 [EMAIL PROTECTED] wrote: The way I test the surge suppressors I manufacture is to place a high voltage across the suppression device

Re: [WISPA] UL 1Gbps Link

List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ Bob Moldashel [EMAIL PROTECTED] WISPA Wants You! Join today

Re: [WISPA] UL 1Gbps Link

Sorry..That should have been Terror Beam :-) Bob Moldashel [EMAIL PROTECTED] WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] MTI Antennas

Winncom in Chicago Brian Rohrbacher wrote: MT-485025/SVH/E I am looking for these from MTI. Anyone know of a US distributer that might have stock? It is a dual pol 23 dbi that goes on the 1 foot enclosure. I am making some backhauls. Brian

Re: [WISPA] tower install

Mike, Really depends on your foundation and crane availability where you live. If there are no cranes available you will pay more for a crew with a winch and gin pole. 200' is a safe price for $12-15K. Foundation depends on type of soil, rock, etc. Also accessibility to the area being

[WISPA] Bye-Bye Wi-Fi..........

http://www.rcrnews.com/apps/pbcs.dll/article?AID=/20080208/FREE/ 498388084/1018/FREE Bob Moldashel [EMAIL PROTECTED] WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] Tornado

/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ Bob Moldashel [EMAIL PROTECTED

Re: [WISPA] Wireless Video connection

: http://lists.wispa.org/pipermail/wireless/ -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell

Re: [WISPA] OT......Question

/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ Bob Moldashel [EMAIL PROTECTED

[WISPA] OT......Question

on one partition and load XP without doing anything to the Vista OS??? If yes is there a freeware or other program available to assist my non-OS compliant butt??? :-) If you want to reply offlist thats fine. Tnx. -B- Bob Moldashel [EMAIL PROTECTED

Re: [WISPA] OT......Question

for OSXL and used the remaining space for linux. Mike Bushard, Jr Wireless Network Engineer 320-256-WISP (9477) 320-256-9478 Fax -Original Message- From: [EMAIL PROTECTED] [mailto:wireless- [EMAIL PROTECTED] On Behalf Of Bob Moldashel Sent: Sunday, December 09, 2007 10:29 AM To: WISPA General

Re: [WISPA] OT......Question

Wireless Network Engineer 320-256-WISP (9477) 320-256-9478 Fax -Original Message- From: [EMAIL PROTECTED] [mailto:wireless- [EMAIL PROTECTED] On Behalf Of Bob Moldashel Sent: Sunday, December 09, 2007 10:29 AM To: WISPA General List Subject: [WISPA] OT..Question Sorry for this one guys

Re: [WISPA] Orinoco AP with packet loss (AP-1000)

today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ Bob Moldashel

Re: [WISPA] LMR600 Vendor?

Jason How many do you need. Contact me offlist. I should be able to help you. Bob Moldashel Lakeland Comm [EMAIL PROTECTED] On Nov 12, 2007, at 8:27 PM, Jason Wallace wrote: Gang, I am looking for some 15' LMR600 cables, N-type males both ends, one end 90°. Anyone know where

Re: [WISPA] Sprint and Clearwire scrap WiMax deal

://lists.wispa.org/pipermail/wireless/ -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell

Re: [WISPA] Thoughts on 900MHz mesh networks

://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell

Re: [WISPA] Water Tower Mounts

. -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell Would you like to see

Re: [WISPA] Water Tower Mounts

the WISPA Board know your feelings about allowing advertisements on the free WISPA lists. The current Board is taking this under consideration at this time. We want to know your thoughts. -- Bob Moldashel

Re: [WISPA] QuickMounts

JohnnyO wrote: Anyone ever use these ? http://www.towerstructures.com/catalog/rooftop_products/qwikmounts.html JohnnyO Put up a heavy duty non pen. Those things cost a bundle. Don't forget your promise. :-) -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group

Re: [WISPA] Tower standoff

:] WHAT DOG? That pic was taken by an OIB employee and that is how Harish's employee's see him - - That is RICK! :-) Mac -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585

Re: [WISPA] Licensing my BH Links

equipment to use. -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org

Re: [WISPA] 5.4 Ghz

Computing Solutions http://www.ics-il.com -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe

Re: [WISPA] FCC requests .. Bob M. what about FSO

George, i have done very few optical links. I have installed a ton of wireless links to either replace them or back them up over the years. I have not done one in about 2 years so I really can't comment on present new technology, if any. Regards -B- George Rogato wrote: Hey Bob M.

Re: [WISPA] LMR600, LMR900, Heliax

OK.Lets talk cable 1. You can't use 1 1/4 or 1 5/8 heliax at 5 Ghz anything. Can't use 7/8 heliax there either. You canbut it won't work right 2. You can use 5/8 heliax at 5.8 Ghz and below. 3. LMR900 is the largest Times cable you can use at 5.8Ghz. 4. You can use 1 1/4

Re: [WISPA] LMR600, LMR900, Heliax

OK.Now for the lesson in CABLE :-P You can't use 1 5/8 heliax above 2.5 Ghz. Its not rated for it. And forget 5 Ghz. Won't work. 5/8 heliax MAX at 5 Ghz and above. -B- Ralph wrote: You can buy them at Tessco, I'm pretty sure. Stick with Heliax (r) type cables (hard

Re: [WISPA] LMR600, LMR900, Heliax

Inline Ralph wrote: If EVERYONE is misled, then EVERYONE needs a lesson in radio- especially you Jonny-O. My BS as you call it comes from over 30 years in 2 way and data radio and over 10 years in RF Engineering. But before you tell folks to leave radios on the ground, you'd

Re: [WISPA] Walmart RFID update

That's great Ray Can you post the contact info here in case someone else runs into this issue?? Thanks and good luck with them Bob Ray Jean wrote: Hello Everyone Wanted to update you on our walmart rfid problem.We spent hours on monday trying to talk to someone on their rfid deployment

Re: [WISPA] walmart rfid

If their signal occupies the whole band it is probably FHSS in nature. So changing to a 5 or 10 Mhz. channel will not be possible. Also, it may not be possible to turn down the power. So it may not be that simple. A certified letter from an attorney is probably more in order.

Re: [WISPA] tower climbing

Looks like someone was not paying attention when they installed it. You just gotta get balls of steel and slide over. Down one cross member and up another. We do it all the time. BTW: Be careful... :-) -B- Travis Johnson wrote: Hi, I am looking for some advice on the proper

Re: [WISPA] License Wireless Link. Microwave Networks

Rumor has it they are up for sale... FYI Marlon K. Schafer (509) 982-2181 wrote: I've known them for a long time. Not one of the big guys but never heard anything at all bad about them either. Really good folks. Marlon (509) 982-2181 Equipment

Re: [WISPA] License Wireless Link. Microwave Networks

Marlon K. Schafer wrote: Hey there Bob! How the heck have you been? I called a couple of times to say hello but never made it past your voice jail. I was starting to wonder if you'd fallen off a ladder or something! laters, marlon Not me. Sorry for not getting back to you but you

Re: [WISPA] Point To Point Link - What is it?

Mike, We have installed 25+ links of Exalt. Feel free to contact me if I can help. 516-551-1131 Bob Moldashel Lakeland Comm 516-551-1131 Mike Delp wrote: http://www.midconqc.com/images/IMG_1372.JPG http://www.midconqc.com/images/IMG_1375.JPG Something doesn't work at this location

Re: [WISPA] Point To Point Link - What is it?

Alsonothing like going to the costs of buying a dual polarity antenna for a radio that has 2 antenna ports then not putting a cable to connect it! :-) Gotta luv it -B- Mike Delp wrote: http://www.midconqc.com/images/IMG_1372.JPG http://www.midconqc.com/images/IMG_1375.JPG

Re: [WISPA] Power cables???

. Eric Albert Application Engineer Alvarion, Inc. 650-641-0072 CA Office 866-836-3844 Fax [EMAIL PROTECTED] Skype: rericalbert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Moldashel Sent: Sunday, January 14, 2007 6:41 AM To: WISPA General List

[WISPA] Power cables???

Anyone have a source for PC power cables that are around one foot in length. I need about 40 of them. Tnx. -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551

Re: [WISPA] FW: Notice That Public Release of FCC Form 477 Data Has Been Sought

No Comment.. :-) It was just a matter of time -B- Rick Smith wrote: nope :) Guess why. Right. No one's getting my info from that data. -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479

Re: [WISPA] Fw: Happy Holidays from Redline Communications

Christian but there are also other holidays during this time of the year so Happy Holidays is not unreasonable -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551

Re: [WISPA] 25 pr Outdoor cat5

the cable is every bit of 330'...maybe a bit more. Best, Brad -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless

Re: [WISPA] high throughput backhaul options

- Original Message - From: Bob Moldashel [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Tuesday, December 12, 2006 10:11 PM Subject: Re: [WISPA] high throughput backhaul options Matt Liotta wrote: Matt Liotta wrote: Its not greedy; efficient maybe, but not greedy

Re: [WISPA] high throughput backhaul options

. But let's hear it. What would ya do?. -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org

Re: [WISPA] high throughput backhaul options

! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: Bob Moldashel [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Wednesday, December 13, 2006 1:55 PM Subject: Re: [WISPA] high throughput backhaul options OK

Re: [WISPA] high throughput backhaul options

- Original Message - From: Bob Moldashel [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Wednesday, December 13, 2006 4:55 PM Subject: Re: [WISPA] high throughput backhaul options OK...Lets look at this whole issue with one other twist. Let's say you need a large pipe to carry

Re: [WISPA] high throughput backhaul options

the sweet spot for us. -Matt -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http

Re: [WISPA] high throughput backhaul options

I have a handful of these in NYC and Wash DC. They kick ass and the company backs them 150%. They are my first licensed choice. Ceragon is my second. -B- Bob Moldashel wrote: 170 Mb FD Dragonwave... About $20K Matt Liotta wrote: Guys, We are now exceeding Orthogon's capacity

Re: [WISPA] high throughput backhaul options

200Mbps full duplex. -Matt -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe

Re: [WISPA] high throughput backhaul options

-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350

Re: [WISPA] high throughput backhaul options

very efficient -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http

Re: [WISPA] high throughput backhaul options

There is a matching network that goes on the rear of the antenna. At higher freqs the loss is much lower than on lower freqs. -B- Matt Liotta wrote: Bob Moldashel wrote: You can do that now with 3 Ceragon or Dragonwave radios phased into 1 antenna with much better redundancy. If one

Re: [WISPA] high throughput backhaul options

INTERFERENCE BY ANYONE. So please don't say I am Good luck! -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless

Re: [WISPA] high throughput backhaul options

BTW:: While we are talking responsibility and efficiency how many of you guys and gals drive SUV's, Pick-Up trucks, Vans and other 8 cylinder vehicles Put your hands up. You know who you are.. :-) -B- Bob Moldashel wrote: OK...Lets have a review.. It does not use

Re: [WISPA] high throughput backhaul options

http://www.exaltcom.com/ BTW: What kind of truck do you have :-P Marlon K. Schafer wrote: I thought that they did. How much do they use? - Original Message - From: Bob Moldashel [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Tuesday, December 12, 2006

Re: [WISPA] Anyone using Exalt radios????

and extended warranties. http://www.connectronics.com/exalt/ Regards, Dawn DiPietro Paul Hendry wrote: Interesting. Any idea what the retail value on the 5GHz kit is? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Moldashel Sent: 14 November 2006 02:00

Re: [WISPA] Anyone using Exalt radios????

Paul Hendry wrote: Interesting. Any idea what the retail value on the 5GHz kit is? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Moldashel Sent: 14 November 2006 02:00 To: WISPA General List Subject: [WISPA] Anyone using Exalt radios Just

Re: [WISPA] Re: Anyone using Exalt radios????

Scrivner writes: Bob, Tell us about your experiences with these. Work as advertised? Approximate cost per pair? Thanks, Scriv Bob Moldashel wrote: Just looking for experiences Personally I think they rock but just looking to see if anyone else has any pros/cons www.exaltcom.com 100 Mb

[WISPA] Anyone using Exalt radios????

Just looking for experiences Personally I think they rock but just looking to see if anyone else has any pros/cons www.exaltcom.com 100 Mb FD 2.4 Ghz. radio. H. I bet Marlon would love to have one of these for a neighbor! :-) -B- -- Bob Moldashel Lakeland

Re: [WISPA] OTARD

/edocs_public/attachmatch/FCC-06-157A2.txt http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-06-157A3.txt -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell

Re: [WISPA] wireless fiber revisited

OK.Yeah I have installed one and it's working fine... :-) ButI have also replaced 2 troublesome links for another VAR and replaced them with Bridgewave. Also...there was an issue with the GUI with Win XP if I remember correctly. Just FYI. -- Bob Moldashel Lakeland

Re: [WISPA] Cat5 cable

block that is CAT5 rated. Otherwise, the plenum cable directly to the equipment outside will last you several years without issue. You could also install it inside pvc conduit on sleepers off the roof surface to extend life. Good Luck, -B- -- Bob Moldashel Lakeland Communications, Inc

Re: [WISPA] fiber connection for bridgewave

--- [This e-mail was scanned for viruses by our AntiVirus Protection System] --- [This e-mail was scanned for viruses by our AntiVirus Protection System] -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195

Re: [WISPA] Tsunami MP.11 5054-R Bad Ethernet

-- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo

Re: [WISPA] 18Ghz through power lines?

-Eric You should be fine.Done plenty of these with no issues. -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless

Notice to the Board..... Was: [WISPA] Why's WISPA silent about this?

really appreciate what they are doing for him and his business. And the Fed's never sent us (past and present board members) any financial compensation. They did say that we could make Alberto Gonzales our legal adviser pro bono though.. -- Bob Moldashel Lakeland Communications, Inc

Re: [WISPA] Is this legit email from eBay or a phishing scam?

Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. eBay and the eBay logo are trademarks of eBay Inc. eBay is located at 2145 Hamilton Avenue, San Jose, CA 95125. Thanks -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment

Re: [WISPA] Is this legit email from eBay or a phishing scam?

they should go to the E-Bay home page and sign in thru govt. relations at the bottom -B- Jack Unger wrote: How did you determine that? Bob Moldashel wrote: It's a scam George George Rogato wrote: http://www.ebaymainstreet.com/takeaction/?campaign_id=neutrality1 I just got an email from

Re: [WISPA] 4ft 5.8Ghz dual polarized grid

Tessco, Hutton, Winncom, Alliance, Talley,.. Radiowave, Gabriel, RFS and Andrews all make 4' dual polarity dishes. -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax

Re: [WISPA] 4ft 5.8Ghz dual polarized grid

Matt Liotta wrote: Those are dishes; not grids. -Matt No one makes 4' dual polarity grids that I have ever seen. -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516

Re: [WISPA] 4ft 5.8Ghz dual polarized grid

Matt Liotta wrote: I am looking for grids!!! -Matt Bob Moldashel wrote: Tessco, Hutton, Winncom, Alliance, Talley,.. Radiowave, Gabriel, RFS and Andrews all make 4' dual polarity dishes. They don't make grids! :-P -- Bob Moldashel Lakeland Communications, Inc. Broadband

[WISPA] [Fwd: [Tower-pro] Tower Climber dies in PA]

I thought this was important enough to cross-post it accross the above addresses This is from the Tower-Pro list -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax

Re: [WISPA] Pioneering Wi-Fi City Sees Startup Woes

3500 registered users using a network that costs $400K per year to maintain!!! That's $114 per subscriber! Why not just pay to give them DSL! LOL -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll

Re: [WISPA] Members List

anyday... Hi V! -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http

Re: [WISPA] Crimp or solder?

times EZ connectors with the captive center pins for years and have never had a connector not sweep to specs. Forget the soldering and go with the EZ's -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195

Re: [WISPA] Applying for Licensed Spectrum

Walton Systems Engineer Micronet Communications, Inc. 720 F Ave., Suite 100 Plano, TX 75074 [EMAIL PROTECTED] ph: (972) 422-7200 fax: (972) 422-1900 -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll

Re: [WISPA] 5.4 very close now

. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA

[WISPA] I know you guys will appreciate this...

http://video.google.com/videoplay?docid=1514168659738935009 :-) Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless

Re: [WISPA] Tranzeo

and reliable. Ive looked at this, Ceragon and Waverider. Any insights are much appreciated. Chris Cooper Intelliwave -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631

Re: [WISPA] FCC Form 477 Due March 1st

cha' think -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http

Re: [WISPA] commscope 3227 coax

Mario Pommier wrote: has anyone used Comm-scope Cable 3227 LMR400-type coax? it is reliable? Thanks. Mario We have used this with Times connectors without any issues... -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York

Re: [WISPA] Wi-Fi causes leukemia and brain tumors

started Boggs! :-) What Up Rog' ? Welcome back. Ya didn't miss anything.. Hope all is well. -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551

Re: [WISPA] FCC Form 477 Due March 1st

Marlon K. Schafer wrote: - Original Message - From: Bob Moldashel [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Tuesday, February 21, 2006 6:28 PM Subject: Re: [WISPA] FCC Form 477 Due March 1st Oh Marlon, Marlon, Marlon.. Hey Scott

Re: Fw: [WISPA] FCC Form 477 Due March 1st

11:30 PM To: Ellen Burton Subject: Fw: [WISPA] FCC Form 477 Due March 1st Hiya Ellen, Remember when I asked what the penalty is for not filing the 477? Got an answer for me yet? thanks! marlon - Original Message - From: Bob Moldashel [EMAIL PROTECTED] To: WISPA General List wireless

Re: [WISPA] 5.8ghz low power distance limitations

WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com Do the math.. +13 +24 +24 - 125 -3 = (-)67 Radio + Antenna + Antenna - FSL - Cable/connector Loss = Rx Level Soo...RX is -67. Is this legal??? Hh.. :-) -B- -- Bob Moldashel Lakeland Communications

Re: [WISPA] FCC Form 477 Due March 1st

- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo

Re: [WISPA] FCC Form 477 Due March 1st

in radio/antenna combinations, etc., when there are so few willing to stand up and be counted. Please, file honestly. I need your vote for the above things. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net http://www.nwwnet.net/ -- Bob

Re: [WISPA] Flawed Spectrum Analysis (I think!)

a spectrum analysis, find a clear channel, build on it and then smile and walk away only to have one of the existing operators change channels and rain on your parade. Its a game of chance but with the proper engineering you can move the odds more in your favor. Good Luck! -B- -- Bob Moldashel

Re: [WISPA] Flawed Spectrum Analysis (I think!)

don't think a properly engineered link is chance luck. We don't just pick a channel out of thin air and go with it. Alot of engineering goes into it. Spectrum analysis is just not a factor 99.999 percent of the time. -B- Dustin -- Bob Moldashel Lakeland Communications, Inc. Broadband

Re: [WISPA] Flawed Spectrum Analysis (I think!)

some shots to a website if Cliff thinks that it is helpful. Dustin Jurman Rapid Systems Corporation 1211 North Westshore Blvd Tampa, FL 33607 813--232-4887 Building Better Infrastructure! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Moldashel

Re: [WISPA] Flawed Spectrum Analysis (I think!)

good for the date it was taken and does not guarantee interference free operation in the future. The last thing you need is to have the customer pay you to do an analysis today and deploy 90 days from now only to find issues. Otherwise...good luck with your customer. -B- -- Bob Moldashel

Re: [WISPA] Good news and bad news today

they want to do is deal with the stress that the utilities will dump on them -B- Jeromie Reeves wrote: Can you explain how it is not available? Yes the insurance is killer. Jeromie Reeves Bob Moldashel wrote: Jeromie Reeves wrote: Right of Way access is available to anyone right now

Re: [WISPA] FCC Form requirement

and location. -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org

Re: [WISPA] Good news and bad news today

You, Brian Webster www.wirelessmapping.com Free World Dialup #481416 -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless

Re: [WISPA] Good news and bad news today

refer to spectrum not already auctioned which could mean whitespace. We probably have a chance to spin this to our advantage unless you guys all would rather just bitch and moan. Scriv -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook

Re: [WISPA] To Break the Law or Not toBreak theLaw...That is theQuestion

! -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List

<    1   2   3   4   >