instinct is to say no, this card will not work under XFree86.
I'm gonna buy a cheapo trident and try again. This h/w incompatibility
is the only thing that will keep linux from being accepted by the
masses. This card works under Windows.
-Kevin
[EMAIL PROTECTED] wrote:
Hey, I am new here and I
declaration of function
`FT_MODULE_CLASS'
fcfreetype.c:542: error: dereferencing pointer to incomplete type
fcfreetype.c:542: error: invalid type argument of `-'
fcfreetype.c:542: error: dereferencing pointer to incomplete type
Could anyone help me? Thanks in advance!
Regards,
Kevin
Dear Marc,
The version is 4.6.0. Thanks!
Regards,
Kevin
Solomon Systech Limited
Direct line: 86169830
Ext: 8830
Email: [EMAIL PROTECTED]
Website: http://www.solomon-systech.com
-Original Message-
From: Marc Aurele La France [mailto:[EMAIL PROTECTED]
Sent: 2007年6月28日 11:22
To: kevin
Cc
directory `/home/kevinzhu/TinyXR46/build/fonts'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/kevinzhu/TinyXR46/build'
make: *** [install] Error 2
Regards,
Kevin
Solomon Systech Limited
Direct line: 86169830
Ext: 8830
Email: [EMAIL PROTECTED]
Website: http://www.solomon-systech.com
Hi,
Please visit http://www.xfree86.org/4.2.0/XF86Config.5.html. May be helpful.
Regards,
Kevin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Rolf Ofsti
Sent: 2007年7月26日 17:51
To: xfree86@XFree86.Org
Subject: [XFree86] using dell 2407 WFPb
Not yet, I'm still working on it.
Regards,
Kevin
Solomon Systech Limited
Direct line: 86169830
Ext: 8830
Email: [EMAIL PROTECTED]
Website: http://www.solomon-systech.com
-Original Message-
From: wile [mailto:[EMAIL PROTECTED]
Sent: 2007年8月7日 10:48
To: [EMAIL PROTECTED]
Subject
file is pretty ugly, so
it's hard to tell too much from it.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
From: [EMAIL PROTECTED]
Date: Tue, 28 Jan
XF86Config file? What is in it? What do you see in the log file when
it fails?
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
No, you're correct, that chipset may be supported by the s3 driver, but
not the s3virge.
Paul Anthony Judd wrote:
Version:
Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/README.sgml,v
3.113.2.4 2001/06/05 20:11:08 dawes
The S3virage driver in does not support a S3
From: Juha Korhonen [EMAIL PROTECTED]
Date: 06 Feb 2003 20:46:53 +0200
Sender: [EMAIL PROTECTED]
On Thu, 2003-02-06 at 02:56, Kevin Oberman wrote:
From: Juha Korhonen [EMAIL PROTECTED]
Date: 06 Feb 2003 00:58:50 +0200
Sender: [EMAIL PROTECTED]
Hi!
I have troubles
From: Michel =?ISO-8859-1?Q?D=E4nzer?= [EMAIL PROTECTED]
Date: 06 Feb 2003 20:54:13 +0100
Sender: [EMAIL PROTECTED]
On Don, 2003-02-06 at 20:44, Juha Korhonen wrote:
On Thu, 2003-02-06 at 21:06, Kevin Oberman wrote:
From: Juha Korhonen [EMAIL PROTECTED]
Date: 06 Feb 2003 20:46:53
else on your OS)
To avoid the problem, switch to a character display before suspending.
Maybe BIOS will fix this some day or someone will come up with a
work-around.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E
please unsubscribe me.
_
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
___
XFree86 mailing list
[EMAIL PROTECTED]
. I have several.
What version are you running and why do you believe it does not
support the 7500?
4.3 (just out today) does have MUCH improved support for these with
many performance enhancements and bug fixes.
In you configuration, the device should specify 'Driver0 ati'.
R. Kevin Oberman
Known bug in line drawing acceleration in Radeon driver prior to
4.3. It is supposed to be fixed in that release, but I have not tried
it yet.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED
Hi, I have been running X without glx entensions for the longest time
because of this problem, but now I need to have it working. I'm running
this on a FreeBSD 5.0 machine with GeForce2 card. The problem is when I
uncomment the glx line, the server core dumps and tells me:
Symbol
Date: Fri, 7 Mar 2003 09:54:59 -0800 (PST)
From: B. Levin [EMAIL PROTECTED]
--- Kevin Oberman [EMAIL PROTECTED] wrote:
If you are not doing so, could you please keep the FreeBSD port
maintainer (Eric Anholt [EMAIL PROTECTED]) up to date on what you find?
And, are you using his patches
-or-
option novbe
?
I believe they are valid in the monitor section, iirc. You should only
try this if you have already set the monitor parameters to valid ranges
in the config file.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman
The ViRGE cards support a max of 4M RAM. You might be able to install
it, although you could probably buy a ViRGE DX on ebay for $5(US) with
4M already. I've never heard of BIOS updates for the ViRGE family, and
probably isn't needed for use with XFree86.
--
Kevin
. This
will pop up a menu where the top item is 'Enable Scrollbar'. Select it and
release the button(s) and the control key.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED
functions keys to select the X vty. On FreeBSD it is Fn-F9 by
default.
Note: The display must be tuned off. Just turning off the back-light by
closing the lid will not work!
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E
.
I attach the config file, the log file with 4.3.0 and the log file with
4.2.1.
Thank you for any attention!
Hmm. What happens if you add
BusID 0:8:0
to your Device section in the config?
It appears either this is now required or the default device logic has
changed.
--
Kevin
,
removing from list!
Could not init font path element /usr/share/fonts/ISO8859-9/misc,
removing from list!
-
--
Kevin Chen
http://www.sneswhiz.com/
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
be
subscribed to devel. (http://www.xfree86.org/mailman/listinfo) If you
get to much traffic from this list, but are primarily interested in
trouble reports, you might try following the list through an archive
like MARC instead of subscribong.
(http://marc.theaimsgroup.com/?l=xfree86r=1b=200304w=2)
--
Kevin
don't think you'll find it very
usable.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
this is incentive to start learning to use Linux in text mode
only, huh?
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
, that would be
helpful. (But please don't send a screen capture to the list.) We need
more information.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
-install with the
config flag in host.def set to install as suid root.
For example, for startx to work on Linux, it needs the properties to
look like:
-rws--x--x1 root root 2019033 2003-06-25 12:49
/usr/X11R6/bin/XFree86*
--
Kevin
___
XFree86
Kernel 2.4.21
XFree86-4.2.1 (compiled from a patched version of the XFree86-4.2.0 source)
I am willing to try development versions or anything else available,
although the CVS version I tried 2 days ago wouldn't compile.
Any suggestions or fixes would be appreciated.
Thank you for your time.
-Kevin
to specify their layout with the ServerLayout
section (if you are doing multi-head). Most of what you need should be
in 'man XF86Config' for the keywords.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
guys can take a look.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hulshoff
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
be interacting with
DGA. Do you want to be able to run 3D accel using dri/drm?
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Kevin Brosius wrote:
Pieter Hulshoff wrote:
On Saturday 01 November 2003 15:03, Peter \ wrote:
That's for the slow DGA setup, right?
Yes, and luckily I just managed to get the Morphix cd to allow me to mount my
drives. :) Here's the files from Morphix.
Regards,
Pieter
I'm using Freebsd 5.1 installed using "standard
install"from the mini-install. ive been able to install xfree86 basically. Im
trying to install Gnome as my desktop. It downloads many packages then i get an
error saying it has "failed" and "the filesystem is full". i have it installed
on a
It appears the S3 maintenance isn't very active at the moment. You're
reports are helpful, as this much detail may make it possible for
someone else to touch up the drawline code. Not sure though I haven't
looked at the s3 myself.
Kevin
Keith Tang wrote:
Klaus,
My system has the same
Thomas Winischhofer wrote:
Kevin Brosius wrote:
I know the s3virge series doesn't have a breshenham compliant engine,
and doubt the s3 variety does either. Their may be logic in the s3
driver to try and simulate bresenham lines with the s3 engine though.
That wouldn't make sense
/modules/drivers/ by default. Thomas would likely provide
you a s3.o module you could swap with your existing driver.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
timed out(3:3).
s3v: warning: VerticalRetraceWait timed out(1:3).
s3v: warning: VerticalRetraceWait timed out(3:3).
Yes, this is a debug message. You can ignore it. Does your card work
properly?
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http
: ps2EnableDataReporting: succeeded
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
, as I tend to
run depth 16 most of the time myself, and I don't think anyone else has
really looked at it recently.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
see the streaking on the virge head while
performing window operations on the other head, do you?
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
operations on the other head, do you?
No, I now have Xinerama working quite nicely (although not at the res I
would have liked). My next problem is to match the colours accross the
two monitors.
Thanks again for all your help!
Glad we improved it :)
--
Kevin
Hello,
I am having a problem in that when X Windows starts and I don't have a mouse
connected (sometimes I use a touchscreen and don't need a mouse), then the
keyboard will not function. X Windows starts fine, but then I just can't do
anything. I tried adding the AllowMouseOpenFail to the
not fully up to speed with what was in the 3.3
series, I suspect. There's been some work on it, but not much recent
contributions I've heard of. It was one of the last to be (partially)
migrated to the 4.x architecture. Contributions are always welcome. :)
--
Kevin
I'm trying to push a linux alternative to sun workstations. We have a
proprietary viewing system that runs in 256 color mode. I've got a
fujitsu lifebook n3010 with red hat 9 installed on it and nothing else.
The application boots but throws a Cannot allocate colormap entry for
default
of it
by using depth 16 also, which is what I generally run on virge dx
cards. These are low end graphics cards, and short of limiting the
depth 24 resolution further in the driver, I don't think there are any
other good solutions at this point. (Well, some driver tuning might
help.)
--
Kevin
in for
ViRGE GX, so it sounds like we still have some trouble there.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
of the cheap memory on some of those virge cards.
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
I am running Gentoo GNU/Linux, kernel 2.4.22.
I have an ATI All in Wonder Radeon 7500 AGP 64mb video card. When I startx
I receive a "No screens found" error. ShouldI post my
XF86Config.0.log file? Thank you.
Kevin
freezes. I must hard reboot to exit.
Kevin
XFree86 Version 4.3.0Release Date: 27 February 2003X Protocol
Version 11, Revision 0, Release 6.6Build Operating System: Linux
2.4.21-pfeifer-r1_pre4 i686 [ELF] Build Date: 13 September
2003Before reporting problems, check http://www.XFree86.Org/to make
Title: Suse Linux 9 problem.
Here's the XFree86.0.0.log file. Please take a look at it and let me know what might be the problem.
Thanks.
...
Kevin Martin
[EMAIL PROTECTED]
XFree86.0.0.log
Description: Binary data
for thier schoolwork.
tommy
If Windows 98 does not have the driver already, you may be able to find
them at http://www.s3graphics.com . Follow the drivers link, which
leads to this agreement page http://ranger.s3graphics.com/swlib/
--
Kevin
___
XFree86
.
This list is primarily for XFree86 on various operating systems.
You may find windows drivers at http://www.s3graphics.com
--
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
included my XF86Config file and the log file. I am hoping
that someone could point out what I have done wrong. XFree86 is
successfully driving the built in LCD.
Thanks,
Kevin
XF86Config:
# XFree86 4 configuration created by redhat-config-xfree86
Section ServerLayout
Identifier Default
for
the driver afterwards. I'm using Debian Sid with XFree86 4.3.0.1
Any help appreciated,
Kevin Börgens
--
http://www.boergens.de
Freedom requires effort if it is to be won and vigilance if it is to be main-
tained. People just don't value freedom until it's taken away Terry Goodkind
Official Supporter
number.
Kevin Benstead
Senior Engineer
RD Division
Thermo Electron Corporation
Radiation Measurement Protection
Beenham, UK
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
et a list of drivers that are installed.
The string you put in quotes is the
file name without the _drv.o on the end.
Hope I'm not teaching you to suck
eggs.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original
Message-
From: colin higgs
[mailto:[EMAIL PROTECTED]]
on the optimum refresh rate
for your LCD and just have that rate specified in your XF86Config file.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Miller, Marlena [mailto:[EMAIL PROTECTED]
Sent: 08 July 2004 14:05
To: [EMAIL PROTECTED]
Subject
Can you send your XF86Config file.
There is something strange going on there. The log file indicates that you
have a virtual screen that is smaller than your actual screen. A virtual
desktop would allow you to display say a 1024x768 layout on a 640x480 screen
and pan around.
Kevin
email
to.
Hope this helps.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Pleased to be of help.
Good luck with the rest of your project.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Miller, Marlena [mailto:[EMAIL PROTECTED]
Sent: 09 July 2004 13:48
To: Benstead, Kevin; [EMAIL PROTECTED]
Subject: RE: [XFree86
.
If the file that X says you need to delete is there then delete it.
Type rm .X0.
X creates this file so that it knows that it is running and deletes it when
it exits. This prevents two copies of X running on the same system.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971
to the modules/drivers directory and then
copy the radeon_drv.o file from there to /usr/X11R6/lib/modules/drivers/
directory.
Then you should be able to start X.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Carlos Figueiredo [mailto:[EMAIL
If you want to use the later driver than you will need to update to
Xfree4.4.0
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Carlos Figueiredo [mailto:[EMAIL PROTECTED]
Sent: 12 July 2004 17:15
To: [EMAIL PROTECTED]
Subject: Re: [XFree86
.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Alexander Gordeyev [mailto:[EMAIL PROTECTED]
Sent: 27 July 2004 12:56
To: [EMAIL PROTECTED]
Subject: [XFree86] Mice with absolute-coordinates?
Hello!
In accordance with mouse sources, all
.log you get returned something like:
total 4
drwxr-xr-x2 root root 48 2004-08-19 09:20 .
drwxrwxrwt 58 root root 4288 2004-08-19 09:20 ..
Is this the case? If so, rm the directory and then try your startx.
Kevin Martin
Your log file indicates you can't set colour depth of 16 so try setting
colour depth to 8.
In your config file look for the Screen0 section and change the default
depth to 8.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: [EMAIL PROTECTED
If you are using a 3M SC3 or SC4 touch controller you don't really want to
be using the microtouch driver.
There is a much better driver at http://www.cdp1802.org/mmmtouch/ which has
a calibration routine that does all the work for you.
The version for Xfree4.3.0 works for 4.4.0 as well.
Kevin
on the
serial protocol so you can work out how to find the X and Y co-ordinates for
each touch.
If only there were a calibration routine as part of X. Perhaps one day
someone will write one. I'm not volunteering I've got enough to do.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971
formed (i.e has 6 bytes instead of 5) its
wise to ignore it.
If you download the EX11-1000SC controller technical reference from the 3M
website at http://www.3m.com/3MTouchSystems/downloads/PDFs/19252V21.pdf this
information is on page 24.
Hope this helps.
Kevin
-Original Message-
From
of the program running on a 400MHz EDEN processor with a
Savage graphics chip takes less than 1% of CPU time.
Is it just that the geode driver is not very good or is there some other
problem. If windoze drivers can draw the charts quick enough why cant the
xfree drivers do the same thing.
Kevin
Some thoughts.
(B
(BWe use a system which has a touch screen but no mouse which works OK.
(B
(BI'm not sure if you want to have a mouse on your system sometimes.
(B
(BIf you don$B!G(Jt need a mouse at any time just comment out both the line in the
(BServerLayout section which references
font server is running before you attempt to start X.
This FAQ (which Mark Vojkovich suggested you read earlier today) should tell
you what you need to know.
http://xfree86.linuxwiki.org/FAQ
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From
you a clock and a terminal window.
If you want other windows managers (KDE Gnome etc) try looking on their
websites for advice on getting them running.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Zeljko Djuricic [mailto:[EMAIL PROTECTED
to install KDE. It also
gives you the chance to download the latest version (if you want).
Best of luck.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Zeljko Djuricic [mailto:[EMAIL PROTECTED]
Sent: 30 September 2004 12:29
To: [EMAIL PROTECTED
Try using the void driver
Look here for details
http://www.xfree86.org/4.2.0/void.4.html
I only found this myself a day or so ago.
It says it can also be used as a keyboard driver.
Be aware that your application will have to cope with out a mouse.
Kevin
email: [EMAIL PROTECTED]
Tel
explains how to get your X running without using a Font Server.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Andrew Haninger [mailto:[EMAIL PROTECTED]
Sent: 07 January 2005 13:40
To: xfree86@xfree86.org
Subject: Re: [XFree86] Xfree86 log error
my VideoRAM setting in the config file is
8192 (8M x 1024).
Hope this helps.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: John Puri [mailto:[EMAIL PROTECTED]
Sent: 15 January 2005 03:57
To: Benstead, Kevin
Subject: RE: [XFree86] Troubleshoot
Device
Identifier VideoCard0
Driver Savage
VendorName VideoCard vendor
BoardName S3 Prosavage KM133
Option UseBIOS False
VideoRAM 32764
EndSection
Hope this helps.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message
presume the Activboard does.
You will need to delve into the serial protocol between the Activboard and
the PC. You may have to nag them for them to give it to you.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Grant Sewell [mailto:[EMAIL
sales by not supporting Linux it might spur them into
action.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Grant Sewell [mailto:[EMAIL PROTECTED]
Sent: 21 January 2005 08:53
To: xfree86@XFree86.Org
Subject: Re: [XFree86] Interactive Whiteboard
you have chosen.
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Alex Mavrogonatos [mailto:[EMAIL PROTECTED]
Sent: 09 March 2005 11:20
To: xfree86@XFree86.Org
Subject: [XFree86] External Lcd Problems with laptop! Aaaargh!
Hi, I'm kinda
To get the full server message, check /var/log/Xfree86.0.log
X10 : fatal IO error 104 (connection reset by peer) on X server : 0.0 after 0 requests (0 known processed) with 0 events remaining.
Your help will be highly appreciated.
Yours faithfully
Kevin Mas
Find local movie times
PC
environment or have I botched something else?
Thanks in advance
Kevin
Below is my XFree86confg
+
Section
ServerLayout
Identifier XFree86
Configured
Screen 0 Screen0 0
0
InputDevice Mouse0
CorePointer
I have a Samsung Syncmaster 3 display and I use
31.5-40 for Horizontal and
50-100 for Vertical refresh
This gives me 1024x768 without any extra configuration on my system.
- Original Message -
From: Brijesh Bhaskaran [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, February 19,
I'm wondering what KDE would have to do with this.
I see you have many small problems. You most likely also just installed a newer
version of X and upgraded from a 3.3.x server. The /etc/X11/XF86Config file for
the 3.3.x server uses the keyword device in ways that the newer 4.x.x Xserver
This is NOT a bug. The ATI Rage128 chipset on the All-In-Wonder 128 Pro
video card is actually locked into a refresh rate of 60 Hz at 800X600
resolution when TV is enabled. The card itself cannot produce two different
refresh rates at the same time to satisfy both your monitor and the TV
signal.
: Saturday, February 22, 2003 5:23 AM
Subject: Re: [XFree86] Re: TV-out messes up things when TV is plugged in
On Sat, 2003-02-22 at 10:16, Kevin B. Payne wrote:
This is NOT a bug. The ATI Rage128 chipset on the All-In-Wonder 128 Pro
video card is actually locked into a refresh rate of 60 Hz
I recently installed Red Hat Linux 7.3 on my system, but X fails to
start up properly. When X attempts to start up, it prints the
following message:
XIO: fatal error 104 (Connection reset by peer) on X server :0.0
after 0 requests (0 known processed) with 0 minutes remaining
[repeats 9 more
that or it requires Xinerama, in
which case it shouldn't get built if Xinerama isn't enabled. A bug
either way.
It was missing a few #ifdef PANORAMIX's. Those have now been fixed.
Kevin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org
command error'
I'm not a Linux Guru by any stretch of the imagination, but learning quickly,...can anyone provide me with some guidance on what might be causing these 2 quirks, and how I might correct them??
Thanks in Advance for any and all help,
Kevin Merrill
[EMAIL PROTECTED]
, but then use 'sw_cursor' option, does the
noise still appear?
--
Kevin
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
mode
needs?
No, I think you should leave fbOffset at 0 and add the 32M to the
pScrn-memPhysBase (and pass that to xf86MapPciMem) instead.
The virge supports a seperate config for little/bigendian memory
mapping, so this might be a better choice than adding 32M as you
suggest.
--
Kevin
David Dawes wrote:
On Sat, Jan 25, 2003 at 02:42:57PM -0500, Kevin Brosius wrote:
I've upgraded a machine from an early version of 4.2.99 (.1 I think) and
find a couple problems. I am unable to kill the server with
Ctr-Alt-BkSpc as mentioned in several earlier list emails, although
David Dawes wrote:
On Sun, Jan 26, 2003 at 03:06:36AM -0500, Kevin Brosius wrote:
Does the server work correctly other than the key sequence not
working? If it is stuck somewhere, it might explain both why
SIGTERM and SIGHUP didn't do anything and why the terminate key
sequence
David Dawes wrote:
On Mon, Jan 27, 2003 at 09:52:48PM -0500, Kevin Brosius wrote:
I'd like to be able to add/remove an XVideo interface on the fly during
mode switches. Is this possible with the existing interface? I don't
see anything in the DESIGN doc other than the xf86XVScreenInit
- no option for that? OK, will just hardcode it and see.
Some options that are general to all drivers are only documented in 'man
XF86Config' not 'man s3virge'. You should find that 'videoram 2048'
works for the s3virge driver in the Device section.
--
Kevin
Marc Aurele La France wrote:
On Wed, 29 Jan 2003, Kevin Brosius wrote:
Is there a known problem with accelerated fills on some ATI cards at
depth 24? Using an ATI Rage XL (depth 16 log available at
http://kevb.net/files/XFree86_ATI_16.log) at depth 24, I notice
corrupted
Mark Vojkovich wrote:
It's not there anymore.
Mark.
Seems to be there now, temporary problem?
http://cvsweb.xfree86.org/cvsweb/
--
Kevin
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo
1 - 100 of 289 matches
Mail list logo