It is not clear to me that the reference to a diffuser there is to a lay-in type in a light hazard flat tile ceiling. But even if it is, the definition makes no sense: DOWNWARD DISCHARGE: "Cylinder with 1'-0" or less radius from edge extending 1'-0" below and 2'-6" above"; "edge" of what?, "2'-6" above", above what? Hep me out here folks, I know it's Friday, but still.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of PCE Sent: Friday, March 30, 2007 2:46 PM To: [email protected] Subject: Re: Curious Bill, I would start with Table 8.3.2.5(a) and go from there. Item 1(c) is for a diffuser. PARSLEY CONSULTING Ken Wagoner, SET 760.745.6181 voice 760.745.0537 fax [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> e-mail www.ParsleyConsulting.com <http://www.ParsleyConsulting.com> website Bill Minkel wrote: > We have an AHJ saying our center-of-tile recessed 155F sprinkler is > too close to the HVAC supply diffuser in an A.T.C. (less than 2') I am > curious as to what section or paragraph in NFPA-13, 2002 references > this requirement? I can't find it, maybe one of y'all can hep me? > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > > > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
