Re: [PEDA] Export an IPC-D-356 format Netlist for PWB MFGcircuittesting

[Jim Mcgrath]

Mr. Lomax,

This was regarding my reply about Ecam.
Mr. Lomax apparently did not read it thoroughly.

Abd ul-Rahman Lomax wrote:

> At 02:19 PM 5/1/01 -0700, Jim McGrath wrote:
> >[re IPC-D-356 net lists]
> >I've never seen an option to load Just a cam database netlist. I can't see
> >how that would work as gerbers a dumb and don't know a certain group of
> >pads are "U21".
>
> IPC-D-356 includes pad location information, which then allows correlation
> with the gerber data. If a pad is located on the top side at X,Y, then any
> copper at that location is supposedly part of the net associated with that pad.

Of Course it does! Did You read my other posts? I read yours and you indicated
You were NOT up on the D-356 file. Please don't offer what you don't know.

Sorry all, I can take many of these posts but there has to be a limit.

Respectfully,

Jim McGrath
CAD Connections, Inc.


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To join or leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *