At 10:13 AM 4/17/2002 -0700, Shuping Lew wrote:
>---I created netlist for each sheets. There are total 25 sheets. I then
>loaded them individaully. There were no problem.

If the problem was, for example, that you had an incorrect scope such that 
some net names were duplicated between sheets even though you did not 
intend to connect them, or there were duplicate designators, with one on 
one sheet and another on another sheet, each sheet would still load 
correctly, but the combination would fail in some way.

A common error is the use of flat hierarchy with named nets on each sheet, 
but the sheet numbers are not added to the net names. This will cause 
duplicate net names, quite a mess.

What Mr. Velander wrote should also be noticed.

I'd be interested to see that net list. Mr. Lew, if he is concerned about 
proprietary data, could make a copy of his .ddb, edit the schematic to 
remove all type data, generate a net list -- which should still crash 
Protel, that should be verified -- and send it to me or to anyone else 
interested. Don't send it to the list!

(A net list without data regarding the types of parts contains zero IP. I 
would not reveal the data to anyone else anyway, even if it did contain 
type data.)

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to