I use some notes on every schematic project. So I created a schematic symbol
named "note" for it. To avoid the warning of missing footprint, I also
created a footprint named "blank" to associate with that symbol. For some
reason, Protel does not like the footprint "Blank"(there is not primitive on
the footprint at all). I deleted component "note" from the netlist, it seems
ok now...

Shuping

-----Original Message-----
From: Matt Pobursky [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 17, 2002 2:23 PM
To: Protel EDA Forum
Subject: Re: [PEDA] FW: Access violation -- Is it a Protel bug?


On Wed, 17 Apr 2002 14:07:39 -0700, Tony Karavidas wrote:
>Was it your motherboard? ;)
>
>What hardware component did you "delete"

Lew --
Yes, please elaborate. Telling us exactly what the problem was
and how you fixed it might help some other list member in the
future. It might also be seen by Altium personnel trolling the
list... ;-)

Matt Pobursky
Maximum Performance Systems


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to