Was it your motherboard? ;) What hardware component did you "delete"
Tony > -----Original Message----- > From: Shuping Lew [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, April 17, 2002 1:25 PM > To: 'Protel EDA Forum' > Subject: Re: [PEDA] FW: Access violation -- Is it a Protel bug? > > > Thanks for all of your help. > > I found the problem. One hardware component was causing the trouble. I > deleted it and now the program works normal. > > Shuping > > > > -----Original Message----- > From: Abd ulRahman Lomax [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, April 17, 2002 12:25 PM > To: Protel EDA Forum > Subject: Re: [PEDA] FW: Access violation -- Is it a Protel bug? > > > At 10:13 AM 4/17/2002 -0700, Shuping Lew wrote: > >---I created netlist for each sheets. There are total 25 sheets. I then > >loaded them individaully. There were no problem. > > If the problem was, for example, that you had an incorrect scope such that > some net names were duplicated between sheets even though you did not > intend to connect them, or there were duplicate designators, with one on > one sheet and another on another sheet, each sheet would still load > correctly, but the combination would fail in some way. > > A common error is the use of flat hierarchy with named nets on each sheet, > but the sheet numbers are not added to the net names. This will cause > duplicate net names, quite a mess. > > What Mr. Velander wrote should also be noticed. > > I'd be interested to see that net list. Mr. Lew, if he is concerned about > proprietary data, could make a copy of his .ddb, edit the schematic to > remove all type data, generate a net list -- which should still crash > Protel, that should be verified -- and send it to me or to anyone else > interested. Don't send it to the list! > > (A net list without data regarding the types of parts contains zero IP. I > would not reveal the data to anyone else anyway, even if it did contain > type data.) > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *