Robert,
Off topic but...
I love your quote at the end of your email, "On the 8th day. God created
Amateur Radio and Baseball."
Read it to the xyl and she rolled her eyes and said that you forgot to add
"beer" to your lineHihi. Check out my QRZ page.
73,
Steve KS6PD
Kx3 #3604
On Saturd
The last batch of PP's I purchased were pre welded together, which is very
convenient. A spot of super glue also works well.
Steve
W1SFR
Sent from my iPad
On Jun 17, 2013, at 5:35 AM, "Fred Smith" wrote:
> When I first tried my hand at power poles they came apart as soon as I put
> them toget
Thanks for all the feed back! Looks like I'll be taking the 30 minute drive
to Watsonville this week.
Steve KS6PD
On Saturday, June 15, 2013, Donald Butler wrote:
> I have two W2 meters and I like them .. But I do not rely upon them for
> accurate power readings.. My more practical use is to us
Greetings,
Thinking of picking up the W2 wattmeter to go in the shack with the rest of
my gear (and future K3 and KPA500some day). I was reading the reviews on
eham, but still had a few questions I didn't see there.
I was curious about the accuracy of the meter and how well the peak hold
func
'Mr Mark' sounds rather oriental to me
73 Stephen G4SJP
On 12 June 2013 07:38, Keith Heimbold wrote:
> Looks like a scam to me too.
>
> Sent from my iPhone please excuse typos
>
> On Jun 11, 2013, at 11:37 PM, "Scott Manthe"
> wrote:
>
> >
Greetings,
I too can not hear the nets at my QTH 50 miles south of San Francisco. Only
once did I hear a station down in Southern California who was able to relay
for me, but other than that, nada. I know it's not my antenna (okay maybe
it is a little) because I work and can hear other states and
Good morning,
I believe it leaves it the mic bias on but turns off the compression. If
your using a signalink USB, you need to have the mic bias off UNLESS you
are using their prefab jumper board. If you're using their board, you can
leave mic bias on. If you're using wire jumpers, it needs to be
Totally agree. I've had a Yaesu radio and customer service is nonexistent. I've
owned a K2, K1 and KX1 and just ordered a KX3 and I actually look forward to
talking the the folks at Elecraft because it's such a refreshing change from
the usual fare of people that know nothing reading from a cust
I'm with you, the building without solder smoke didn't appeal too much to me so
I ordered my KX3 factory built ;-)
Steve
W1SFR
On May 28, 2013, at 1:52 PM, Hisashi T Fujinaka wrote:
> I agree with George. I'd jump at the chance to build another kit like
> the K2, but the K3 really didn't do a
Check this out.
I got one and it works great.
http://acmeqrp.com
73
Steve
W1SFR
On May 27, 2013, at 6:50 PM, Lee Stephens wrote:
>
> Thanks John,
>
> That satisfies my need on several levels.
>
> 1. I can set the output voltage and then lock the set screw so it doesn't
> move if bumped.
A little help, please.
I am using a MacBook Pro for shack computer. I am getting the K3 and KPA 500
firmware updates with no problem using this computer.
However, the KAT 500 tuner will not recognize the MAC for the initial utility
download. I am using the SerialPort 2 for K3 firmware whi
Call me crazy, but after many QRP contacts, both DX and US, I'm thinking I
could be happy with just a KX3 instead of my K2/100. Is that just nutty
thinking? Maybe just get a HFpacker amp for the occasional QRO boost. The SDR
aspects of the KX3 are really appealing to me.
Signed,
Can't have it
I agree. I built most of the add ons and never had any problems except for the
occasional brain malfunction where I installed the wrong component HiHi.
By the book and you'll be fine.
73
Steve
W1SFR
Sent from my iPad
On May 21, 2013, at 1:54 AM, Stan AE7UT wrote:
> I'm just starting a K2 bui
I can't believe u guys are bugging Wayne for hats. Do u have any clue what is
involved in preparing and managing a trade show? Give it a rest and wait until
he gets back to the office.
Note to Wayne:
Extending your brand through promotional items makes good sense financially and
from a marketin
Anyone have one I could buy? I know I can get one at HRO but they want as much
for shipping as the cost of 2 connectors. I checked my local RS and no luck
there.
73
Steve
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
Hi, Don:
While using K3 (S/N 855) today, the power out of the K3 dropped to
'0' in mid-sentence. I was putting out about 50 watts
driving an ACOM 2000A. I checked all the obvious things, short of
resetting the rig. From the rig straight to a dummy load
(by passing the ACOM amp, etc.) there is
Yeah boysme too!!
On May 14, 2013, at 6:53 PM, Harlan wrote:
> Maybe the "bosses" can make both hats and shirts available for a nominal fee
> on the website.. 8>)
>
> Sent from my Verizon Wireless 4G LTE DROID
>
> Rick Robinson wrote:
>
>> I'd like one also and some t shirts. Looked
Anyone have an extra they can sell me?
73
Steve Roberts-W1SFR
Sudbury, VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth
time!
If I may add my indirect experience of the KPA500 in that a good friend of
mine bought one, he too very quickly followed up with an order for the
KAT500 and is, I believe, very happy with its performance.
73 Stephen G4SJP
On 12 May 2013 20:35, Bill wrote:
> I received many direct emai
Skip,
I can hear no difference on FM between the K3 and the KX3. 1uV from the
XG3 on 50.120 MHz gives much the same level of smooth noise from both
radios. My KX3 is #434 so yours is not an 'age' issue, there must be
something else wrong.
73 Stephen G4SJP
On 4 May 2013 02:56,
, but I
wasn't brave enough to try and remove it as Fred suggested in case I
trashed the board. So far I don't need to make that change. Phew!
Thanks again to the list for helping me with this issue.
73
Steve
M0BPQ
On 17 April 2013 12:59, STEPHEN BUNTING wrote:
> Hi,
>
> I
I'm with you Mark. A123's are the bees knees. I also use them for RC planes and
they can put out 30A no sweat and you can charge them much faster than Lipo's.
Steve
Sent from my iPad
On Apr 26, 2013, at 1:54 PM, Mark Goldberg wrote:
> I am very big on LiFePO4 battery packs, 4 Genuine A123 ce
Hi,
I have a K2/100 on my bench that is behaving strangely and I’d like some
advice. This has the SSB board and Z1 buffer amp and 2.04P firmware.
That radio hasn’t been used for some time and I am told it was stored in an
attic space so will have been subject to temperature swings. Initial
s
I have an excess KFL4 K1 board so it's got to go.
$100
Steve
W1SFR
paypal to steve...@shoreham.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elec
I have a 4 band board for a K1 that I want to sell, but not sure what bands are
on it. How can I identify which board this is? I'm pretty sure it's 40, 30, 20,
15
Steve
W1SFR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Anyone?
Steve
W1SFR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help suppor
It took some finding on the Elecraft site and in the end I had to use the
site's search tool, but the information (and more besides) is at
http://www.elecraft.com/K3/k3_operating_tips.htm
I agree that something so important should be in the main manual.
73 Stephen G4SJP
On 3 April 2013
The latest firmware for the KX3 has completely transformed operation of the
internal speaker - an amazing improvement!
73 Stephen G4SJP
KX3 #0434
On 31 March 2013 10:02, Johnny Siu wrote:
> **
>
>
> I put the KX3 in the heat of CQ WPX in 10m. The audio from the internal
>
Put me on the list of devotees. Thanks Don for your unfailing assistance. You
are such a great example of the true spirit of amateur radio!
Steve
W1SFR
On Mar 30, 2013, at 2:13 PM, Ariel Jacala wrote:
> I have, likewise, been looking for the same opportunity. I would venture to
> guess tha
I am using a PC headset with good results (good reports) with my KX3.
I am using a Cyber Acoustics AC-200 3.5MM Plug Stereo Speech Headset Boom
Mic from Amazon.com ($8.64). (16 left)
"This AC-200B Stereo Headset with noise canceling microphone is Voice
Recognition Certified."
Bias OFF
PTT off (use
I wholeheartedly agree with Joe, such a change would completely remove the
value of the feature.
73 Stephen G4SJP
On 21 March 2013 19:13, Joe Subich, W4TV wrote:
>
> Please *DON'T!* disable CW in SSB when SSB VOX is off. I never use
> VOX on phone and use CW in SSB regularly.
with the
>> K3 and other modern transceivers the switch should be in the low impedance
>> position.
>> From the schematic, I cannot understand an "out" label on the switch.
>> If you have an MC-60A, then "out" would be reasonable referring to the
>> preamp e
matic that I see on the G4WPW website indicates that
>> the switch changes from low impedance to high impedance. For use with the
>> K3 and other modern transceivers the switch should be in the low impedance
>> position.
>> From the schematic, I cannot understand an "out&qu
d mic
> and has been used with a lot of other transceivers by replacing
> the cable from the base to the rig with one wired appropriately.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 3/14/2013 3:35 PM, Stephen Roberts wrote:
>> I was recently given an MC-60 mic and
I was recently given an MC-60 mic and I read that the MC-60 was perfectly
compatible with the K2, but I plugged it in and it doesn't work, so what should
I check for?
73
Steve
W1SFR
__
Elecraft mailing list
Home: http://mailman.qth.n
I would really like to have dual receive capability while I'm using my K2 split
for DX. What do you think is the most practical way to approach that without
buying another radio and installing another antenna?
I have an old Kenwood TS-430 available that I was thinking of using for an
additiona
I agree, the KAT2 is the bomb!
Sent from my iPad
On Mar 10, 2013, at 10:04 AM, Don Wilhelm wrote:
> Don,
>
> Welcome to the Elecraft list. You must be posting properly, your post made
> it to the list.
>
> When you hold the TUNE button, there is only a brief 'beep' not a tone.
>
> During a
Good point Rick. I worked them on 20m at about 1400 UTC with my K2 at 80w into
an OCF Dipole. He asked for my call about 8 times, but we finally connected.
73
Steve, W1SFR
On Mar 7, 2013, at 8:11 AM, Rick McClelland, AA5S wrote:
> Something that should be heartening for the less well-heeled a
I get just the same, I believe it is the built in preamp clicking in and
out. However, it does seem to do it more often that it used to, but that
could be my imagination!
73 Stephen G4SJP
On Thursday, 7 March 2013, Howard Hoyt wrote:
> My P3 works well, however sometimes (like right now)
ck on and the SVGA loaded okay - it could have been
coincicidence of course. I had similar issues last upload as well which is
very much in contrast to the troublefree uploads I have done on the K3 and
KX3 over the years.
73 Stephen G4SJP
On 5 March 2013 06:03, Bill Frantz wrote:
> I just
. As
fldigi and Rumlog are not completely integrated I don't have the option of
CAT control for PTT in the data modes, hence the need for the VOX to be
enabled.
Having said that, it's a very minor irritation that I can easily live with!
Thanks for taking the trouble to reply,
73
SET function for VOX but the programmer's reference implies that it
is not yet available.
I'd appreciate any comments from folks more used to doing this type of
thing - it is relatively new territory for me.
Thanks
Ste
I'm a mac guy and have a 27" iMac which has MacLoggerDeluxe on it. After using
a couple of different programs over the last year, I'm thinking that it might
be more useful to have a notebook or laptop (small) that will fit into my small
space with my radio (a K2). Seems like logging software on
Mark,
You will have to enlighten us (well, me anyway) - just what pre-beta
software are you referring to?
73 Stephen G4SJP
On 13 February 2013 04:10, Mark wrote:
> Just a report that I used the pre beta low bandwidth fsk software on both
> k3s during the
> WPX RTTY contest. Made
the one that disables the external display.
I am running firmware version 1.25.
Any ideas?
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I've had absolutely no issues with my P3 and a 2m ssb transceiver just
inches from it. This will doubtless be the exception rather than the
rule. There must be something not quite right somewhere.
73 Stephen G4SJP
On 11 February 2013 07:37, Tim Hague wrote:
> I'd be interest
it would if CWT
were not selected.
I've had a dig through the manual but come up with nothing, but as my xyl
would say, I'm useless at finding anything!!
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/
Crazy like the rest of us poor souls!
On Feb 1, 2013, at 8:20 AM, Paul Roche wrote:
> I was having so much fun building it that I kept on chugging along. Now it
> is finished and works great. My first two QSOs were with EW7LO and CR23V on
> 40 meters.
>
> But now I am kind of sad, I think BUILD
You just need a good reason, not a US ticket. However, I'm not sure that
Elecraft would endorse marine operation!
I was sent a file to open mine for 60m use some years ago.
73 Stephen G4SJP
On 21 January 2013 12:50, Tom H Childers wrote:
>
> The K3 can be opened up, but I belie
I have the upload sorted now. I was power cycling the P3 as suggested but
that did nothing. Power cycling the K3 as well caused the problem to go
away.
I don't know why I hadn't thought of doing it earlier.
73 Stephen G4SJP
On 19 January 2013 11:01, Fred Smith wrote:
> Same
quot; verified
08:49:57 FPGA 4 programming failed.
Verify file source and version.Turn the P3 off and back on, then re-try the
firmware load.
08:49:57 FPGA 4 firmware load failed
08:50:04 P3 is not responding.
All advice gratefully received!
73 Stephen G4SJP
On 19 January 2013 08:43, Stephe
I have a very similar problem. Some files get transferred and the P3
reports that it is on 1.24 but other FPGA files fail with the utility
claiming that it is not responding.
Stephen G4SJP
On 19 January 2013 06:32, Charlie Delta wrote:
> Hi Paul
>
> I have had all sorts of proble
been many months since the last firmware upgrade.
Having said that, the P3 has become an integral part of the way that I
operate and I cannot imagine being without it.
73 Stephen G4SJP
On 17 January 2013 22:11, Gary Gregory wrote:
> Dave,
>
> The P3 NEEDS the upgrade to monitor the
I would agree with Don's most recent statement. My K2 is my shack rig and the
KPA100 is built in and the rig sits on top of the KAT100. A fantastic
combination to be sure. When I first built the KPA100 I ran the K2 with an
outboard LDG auto tuner and there's simply no comparison. Sounds like you
I have the same from here at work. . I'm not sure that our network
manager would be too pleased to be told that our school IP address is dodgy!
It worked fine for me from home this morning (BTInternet). A fantastic
site, really comprehensive information.
73 Stephen G4SJP
On 15 January
:-)
73 Stephen G4SJP
On 10 January 2013 23:22, K7JLTextra wrote:
> I will try again, did not work the first time I tried it. Needs to be
> added to the manual.
>
> John Hendricks K7JLT
>
> On Jan 10, 2013, at 14:46, Chuck Shefflette - AA3CS wrote:
>
> > VOX works fine in
I to have had similar issues with the PF2 touch keyer. For whatever reason, it
is unusable in my shack as it is currently set up. It works just perfect for a
while, then goes haywire. Others swear by it and it does have a very
interesting "action". You almost get the sensation that the finger pi
! I thoroughly
appreciated it on my Icom 7400.
73 Stephen G4SJP
On 6 January 2013 04:31, Lance Collister, W7GJ wrote:
> Me too!!! My IC746 works that way and it is very handy for moving up the
> band...seems like it would be very well suited to a firmware enhancement
> ;-) VY 73, Lance
>
Anyone?
Off list please
steve...@shoreham.net
73
Steve, W1SFR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list host
I'm looking for a vary-speed attachment for my newly acquired 1943 Vibroplex
Original plus a couple of extra weights to experiment with.
Anyone?
Off list please.
73
Steve
W1SFR
__
Elecraft mailing list
Home: http://mailman.qth.net/mai
A well thought out ridiculous post. Sorry.
You want 11m, get a radio for that purpose.
Maybe Elecraft could put a microwave oven in the KX3 as well.
73
Steve
W1SFR
On Dec 14, 2012, at 7:50 AM, Gary Gregory wrote:
> Nope, not allowed in VK either!
>
> On 11M band you need to learn a foreig
Gil-
If you just do CW portable, why not get a KX1 with the included paddles? Much
less expensive than the KX3. And you can keep your K2! Why sell something
that you put so much into?
With the K1, I carry three items, a battery, the K1, and my paddles.
With the KX3, I'll have only one, usi
I think I recently saw a post about an inexpensive travel case for the K1, but
I can't find it. Can someone help me out here? I'm looking for a less expensive
case than the Pelican 1400/1520.
Best 73
Steve
W1SFR
__
Elecraft mailing li
Is it possible to get a narrower filter than 400?
---
Steve Roberts-W1SFR
Sudbury, VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mai
A small drop of cyano (crazy) glue is my choice for keeping them together. Of
course once you do that, they will never be taken apart or move again. I make
up sets ahead of time.
Steve, W1SFR
On Dec 4, 2012, at 12:31 PM, Terry Schieler wrote:
> I don't use the metal PP roll pins for the sa
Weird, the REC function stopped working on my K2. Everything else works as
normal. Suggestions?
Steve
---
Steve Roberts-W1SFR
Sudbury, VT
__
Elecraft mailing list
Home: http://mail
Those of us (well most of us, anyway) living on this side of the pond would
need to remove the front passenger seat from our cars to get the room to
install a K3!!
But I do get 70mpg on a run... :-)
73 Stephen G4SJP
On 26 November 2012 04:39, Ham Radio wrote:
> After a very nice mob
As a new ham, and very new to DX (just a couple of months) I was really turned
off by stations like PT0S at first, but it seems to me that if you really want
a particular station then you have to take whatever comes and be patient. I
spent over an hour just listening on 80m and ultimately there
I agree. I have a house full of CFLs and have had for many years. I don't
believe I have every come across a noisy one. Some of the LED lamps are
horrendous however.
73 Stephen G4SJP
On 18 November 2012 18:02, hawley, charles j jr wrote:
> Seems unlikely. I have a number of these
Looks like you've gone and broken it Don, the nowzerodays website has
exceeded its bandwidth allowance! What a great idea though...
73 Stephen G4SJP
On 17 November 2012 14:26, Don Wilhelm wrote:
> Get on the air for your last QSO!
> QSLs are available, but whether or not th
Sent directly to Tim - I forgot how this reflector works :-(
-- Forwarded message --
From: Stephen Prior
Date: 13 November 2012 14:50
Subject: Re: [Elecraft] OT: LED RFI?
To: Tim Hague
I have some 12V ones in an outside eating area that are absolutely
dreadful. However, I
That's definitely a 'me too'. I find myself doing that all of the time.
73 Stephen G4SJP
On 11 November 2012 15:59, Rick Prather wrote:
> I often wish for the same function.
>
> Would save some time when chasing the typical DX pileup.
>
>
> Rick
> K6LE
>
Well I've been at it for about 8 months now and have worked only CW (about 1100
QSOs to date) since I got my ticket . I'm just beginning to be able to put down
the pen and copy in my head. Sure I miss a couple of words here and there, but
for the most part I'm getting much better. I think I'm at
Got them on right now and love them.
On Oct 30, 2012, at 5:47 PM, Terry Posey wrote:
> Headphones are a highly personal radio accessory - after all they attach
> directly to your body. But, after decades of radio broadcasting and ham
> radio use my all time favorite headset is the Senneheiser HD
I have a brand new Signalink with cables for K2 for sale. Digital modes not my
cup of tea.
$95 shipped in original box with cables, manuals etc.
Reply off list to
steve...@shoreham.net
---
Steve Roberts-W1SFR
Sudbury, VT
_
Anyone have a K1 for sale? I'm looking for one with 40 and 15M.
Thanks
73
Steve
---
Steve Roberts-W1SFR
Sudbury, VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
I have a k2/100 and have a rechargeable 13.8 battery on the low power input and
a 35A power supply for main power to the 100w amp. I assume it's ok to run
power from the 35a power supply to both the low power input and the amp at the
same time right? Would I need a fuse on the low power input?
the P3's display. Perhaps this is a known
issue? This is happening at my usual 20-25 wpm rate.
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I'm finding this a bit of an issue too!
73 Stephen G4SJP
On 1 October 2012 21:11, ai6ii wrote:
> When running split CW and a particularly small bandwidth setting like Span
> 10, the VGA monitor freq indicator is huge, and unlike the P3's screen not
> as 'trans
Does Elecraft have a balun solution for balanced feeders for the KAT500 at 500
watts?
Steve Barry
University at Buffalo Police
Bissell Hall, Amherst Campus
Tel: 716,645-2228 or 645-8910
Cell: 716,207-9494
FAX: 716,645-3758
__
Elecraft
Hi All:
I received my KX3 s/n 1690 about 10 days ago and have been putting it to work
on many modes. It's got best receiver I've ever used, although the highest end
xcvr I've owned previous to it was a TS850 with narrow filters - not quite
high-end compared to the $5K radios on today's market.
Maybe this will help from the manual...
Day/Night Selection: If you're operating outdoors, use the menu
to select L C D DA Y , which turns off the LCD backlight and puts
the bargraph into high-brightness mode. Indoors or at night, use
L C D NI T E , which turns the backlight on and reduces the
bar
Hi
Is there any indication of a release date for these ... and also
estimate of cost?
Will the control interface support other transceivers .. any
preliminary design and/or interface
information ?
Thanks
de zl1any
--
Stephen Pearce
Here's the skinny on A123's
http://www.greencarreports.com/news/1078364_battery-startup-a123-rescue-plan-chinese-firm-to-own-80
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Both of the 3.5 to 2.5mm pigtail adapters I bought from Amazon were not
wired correctly, with no connection at all to the ring (if I remember
correctly). Cheap doesn't always pay in my Experience!
73 Stephen G4SJP
On Saturday, 18 August 2012, Ignacy wrote:
> I got the same results i
I've got a KX3 on order, with the idea of replacing my K2-100 as the primary
radio at home. So, the PA is something I'll be watching for.
I wonder what Wayne and others think about using push-pull mosfet finals as
opposed to the BJT used in the K2-100 PA. Mosfets are almost universally used
in
I have a K2 and recently tested a WMR Clrdsp unit and was very disappointed
with the results. I think the unit was defective and I returned it. But I
wanted to ask the list what outboard DSP units you might use and whether you
think they're worth it or not. I have a hard time forking over $250 f
ay and would happily lose panadaptor
function whilst in data mode.
73 Stephen G4SJP (discovering his K3/P3 again after infatuation with the KX3!)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
Hi, Dick:
Thanks so much for the quick reply.
Of course, I didn't update the info in the cache so it only showed my
last upload (4.39). I
HATE getting old.
Both K3s updated to 4.51...smooth as silk.
Is there a list of menu items current through 4.51 or do I just print
the software update list
I have routinely been able to update software in both K3s in the
usual manner. I tried to update
to 4.51 today and the latest K3 urility that comes up on the Elecraft
site is 1.12.3.28. This utility
will not allow me to update to 4.51. I see that Elecraft recommends
K3 utility 1.3.9.2 but I can
Hey...I resemble that remark!
Ok...well I'm one of those poor recruits that happened to score well in the cw
aptitude test although I had absolutely no prior knowledge of the code. After 6
months at CT school in Pensecola, I was merrily copying away with...yes...wait
for it...a typewriter. NO w
'Colorado' (near Apt)
which could explain it!
20C warmer here today than in the UK. We had to retreat to the air conditioning
of the VW at one point!
73 Stephen F/G4SJP
KX3 #434 en vacances
Full of typos from my iPhone
On 18 Jul 2012, at 18:36, Dave KK7SS wrote:
> The BBC
Hi
Are there any design specs and or likely cost estimate and eta for the kx3
100 pa and atu
(Particularly the control interface)
Thanks
de zl1any
--
Stephen Pearce
Critical Care
Whangarei
ph 021 390 997
__
Elecraft mailing list
Home
Guys, can I say that I'm sick of hearing about KX3 shipments cuz I am...really.
On Jul 11, 2012, at 6:30 PM, Jim Lowman wrote:
> Has anyone received a notice that his KX3 kit will ship soon?
> I haven't heard a word on either the Elecraft list or the KX3 group.
> Nor have I seen anyone in the s
light.
Stephen F/G4SJP
KX3 in the Vaucluse (where it's a little warm for an Englishman!)
On Tuesday, 10 July 2012, Kevin Luxford wrote:
> Thanks to all who responded to my post. I will now gently remove the
> film. It was reassuring to learn that some LCDs were shipped with the
>
Just got a KTA100 from someone on the list and have some problems. Tuning seems
to progress along nicely, but always indicates SWR off the charts. Any ideas
what I'm doing wrong?
Steve
---
Steve Roberts-W1SFR
Sudbury, VT
___
I just purchased a KPA100 from someone on the list and got it installed and
working fine, but I can't seem to get the KI02 going. I'm using a Mac and
Aether software. I set everything correctly in the software and nothing. I
tried Mac logger deluxe and the same result. Checked the KUSB cable tha
Anyone have a built or kit they want to sell?
Steve
---
Steve Roberts-W1SFR
Sudbury, VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://m
I have just ordered the Begali Expedition direct from Italy. It was a
rather rash moment I'm afraid, hope I don't regret it! It just looks so
cute in the photo on the Begali website! I love my Schurr Profi 2 but it's
too big and heavy to leave my desk!
73 Stephen G4SJP
On 25
I'm getting my KPA100 today and now I need to save up for a tuner. I'm
wondering if it would be better to get an external tuner that could be used for
other rigs, or get the KAT100. What are the pros and cons of the KAT100?
Anybody have a KAT 100 for sale out there?
Steve
---
301 - 400 of 1097 matches
Mail list logo