Re: [Elecraft] K3 line out only provides left channel audio
Hi Vic, I just checked my K3s and the line OT is indeed a stereo signal. My MENU settings are exactly like yours. Jim - WS6X -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Victor Rosenthal 4X6GP Sent: Thursday, January 20, 2022 10:02 AM To: Elecraft Reflector Subject: [Elecraft] K3 line out only provides left channel audio For some reason, I am not getting any right channel output from the LIN OUT jack of my K3, either in diversity or normal mode. I hear both receivers properly from the headphone jack, but when I connect my phones to the line output, I can only hear the left channel, which is the main RX. Line out is configured for NOR, level is 10. L-R MIX is set to A B, though it shouldn't matter in diversity mode. It isn't a cabling issue, because I have the problem with the phones directly plugged into the LIN OUT jack. I never tried to use this feature before, so I don't know if it worked before. I hope there is something I'm overlooking here... -- 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 line out only provides left channel audio
For some reason, I am not getting any right channel output from the LIN OUT jack of my K3, either in diversity or normal mode. I hear both receivers properly from the headphone jack, but when I connect my phones to the line output, I can only hear the left channel, which is the main RX. Line out is configured for NOR, level is 10. L-R MIX is set to A B, though it shouldn't matter in diversity mode. It isn't a cabling issue, because I have the problem with the phones directly plugged into the LIN OUT jack. I never tried to use this feature before, so I don't know if it worked before. I hope there is something I'm overlooking here... -- 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line Out audio input to Remote Rig RRC 1258 MKII
Thank you Barry for the great suggestion. VO1HP -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line Out audio input to Remote Rig RRC 1258 MKII
Frank: > On Oct 1, 2020, at 1:53 PM, VO1HPFrank wrote: > > I have a Remote K3 using K3 Mini at my home shack. The audio output from > the remote K3 is taken from the SPKRS jack and fed to the Audio IN jack on > the RR box. I have often wondered about taking audio from the LINE OUT jack > and feed that audio to the RR Box. > > Doing this would allow me to use the radio when I am at the remote site > without having to reach behind the radio in the rack and UNPLUG the audio > cable so I can hear the speaker. Several times I have left the site with > out plugging the audio cable back in which renders the remote useless when I > arrive home. I’m also using the K3/0-mini with Remote Rig. I have a splitter installed on the speaker output port where one connection goes to powered speakers in the shack and the other connection goes to Remote Rig. Nothing to unplug and then forgetting to reconnect and the external speakers provide better fidelity than the K3’s internal speaker. > > I know the level of the LINE OUT is variable in the CONFIG menu. Does the > AF control on the K3 Mini also control the level of the audio to the Mini > speakers --- that audio would be fed to the remote RR box from the LINE OUT > jack on the remote K3.? Keep in mind that the K3/Mini-0 controls what is happening at the K3. So the question is what happens at the shack using the speaker volume knob there. When changing the speaker volume at the K3/0-mini you’re also changing the volume of whatever is happening at the shack’s speaker output. Thus, in my case, if the powered speakers at the shack are left on and I change the volume level on the K3/0-mini, it is also changing the volume level going to the powered speakers in the shack. IF LINE OUT is a variable in the CONFIG menu, whatever you change on the K3/0-Mini when in Config mode for Line Out will control the Line Level going out at the K3. As I understand it, setting LIN OUT includes both volume level and the control of volume. Tapping ‘1’ will change LIN Out to = PHOnES, and the audio level is controlled by the AF/SUB gain controls. In addition, you would need to set SPKR + PH to yES so that audio is still provided to the Speaker when Phones is in use. That way, you don’t have to change the audio output at the K3 when using it either by the K3/0-Mini or directly in the shack. However, this also means that when you’re at the remote site, the K3 Speaker will be active when operating remotely. Presumably you could connect your RR Box to this connection instead of speakers and this may indeed provide what you’re looking for. What you’ll need to determine is whether the provided audio Line Level output will be sufficient to drive the K3/0-Mini internal speaker. I don’t know if the Remote Rig audio will compensate for different levels provided by the the K3 speaker jack versus the K3 Line Out jack. It seems to me that the simplest solution to your concerns is simply insert a splitter in the K3 speaker out jack and share the audio with external speakers at the shack along with the Remote Rig box. With the arrangement, there is nothing to plug/unplug when you’re back in the ham shack and the process for speaker audio level control remains unchanged. FWIW, Barry Baines, WD4ASW/1 (Currently in Boston/Roslindale, MA > > Frank VO1HP > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Line Out audio input to Remote Rig RRC 1258 MKII
I have a Remote K3 using K3 Mini at my home shack. The audio output from the remote K3 is taken from the SPKRS jack and fed to the Audio IN jack on the RR box. I have often wondered about taking audio from the LINE OUT jack and feed that audio to the RR Box. Doing this would allow me to use the radio when I am at the remote site without having to reach behind the radio in the rack and UNPLUG the audio cable so I can hear the speaker. Several times I have left the site with out plugging the audio cable back in which renders the remote useless when I arrive home. I know the level of the LINE OUT is variable in the CONFIG menu. Does the AF control on the K3 Mini also control the level of the audio to the Mini speakers --- that audio would be fed to the remote RR box from the LINE OUT jack on the remote K3.? Frank VO1HP -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3- Line Out Audio
I'm going to second Peter's request, but let me explain it in a different manner. I'll use the terms "Rx audio" to mean the audio from the receivers, and the "Tx Mon" to mean the audio that is being transmitted.; you get a constant audio level output regardless of your AF setting. Currently, the Line Out audio level is adjusted in the Config menu. For recording purposes, IMHO, it works correctly. If you want to record just the receive audio, it is fine. When you want to record the actual contest, though, the receive audio alone isn't enough; you also need the Tx Mon audio. The Tx Mon audio that is mixed into the Line Out audio is varied by the Tx Mon level control on the front panel. If you turn the Mon control fully counterclockwise, you have no Mon audio in your headset and no Mon audio in the recording. Why is this important? As an SO2R operator, I use the Tx Mon audio for two things: make sure I'm not sending gibberish, and as an audio cue that a specific radio is done transmitting. The Mon level is set so that I can barely hear it in the headphone; many SO2R ops use the Mon in just that manner, as does PC2A. If you adjust the Mon gain in that manner, the Tx Mon audio disappears from the recording. In addition, many ops route the mike audio through the soundcard so that they can do on-the-fly recording. Many soundcards introduce enough latency into the process that listening to yourself through the delay is very fatiguing; the easy solution is to turn the Mon level so that you don't hear it. When you do that, the Mon audio disappears from the recording. What we'd like to see is the transmitted audio, be it from cw sidetone or digital signal or ssb audio, to be mixed into the Line Out audio at a level that is not changed when the Mon control is adjusted. The transmitted audio level should be adjusted in step as part of the Line Out Config menu selection. With the new recording needs of CQWW, this should be implemented. Dennis W1UE Copy of PC2A message from several days ago. == Message: 25 Date: Sun, 09 Aug 2015 13:55:23 +0200 From: Peter To: elecraft@mailman.qth.net Subject: [Elecraft] K3 fixed TX audio from the monitor Message-ID: <55c73fab.80...@pi4cc.nl> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hi A long standing wish is to get fixed level audio out from the audio monitor for the K3 Some operators don't like there voice hearing and turn of the audio monitor low or off. Result is a blank or weak TX audio in the recording. See http://mailman.qth.net/pipermail/elecraft/2009-January/102536.html The RX part is done a long time a go but till now no solution for the TX part. With the new rule of audio recording for the upcomming CQWW it pops up again and I like to ask if its possible to add a fixed audio level output for TX From http://www.cqww.com/rules.htm *C. Audio Recordings:* Any single operator entrant (see V.A.1) competing for a top three finish at the (a) World, (b) Continent, or (c) USA levels, must record the transmitted and received audio as heard by the operator for the duration of the contest operation. Are we not al winners in some kind of catagory? :-) Peter PC2A __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3: LINE OUT weirdness
Earlier I reported a problem where the LINE OUT level setting had no effect on the actual output level, but the front panel volume control did. Well, I downloaded and installed latest firmware, which was different from what I downloaded just a few days ago. That fixed both symptoms, except: * While the front panel volume can now be reduced to nothing while the line output level is good and controlled by the menu setting, if I increase the front panel volume above a certain level, it starts to cause increased levels in the line output, as evidenced by the connected laptop's waterfall. * The increased noise is not uniform across the audio spectrum, but appears amplitude modulated with a sine wave so that about two noise maxima are found per 500 Hz. Further increase in speaker volume results in stronger "banding" of the noise. * With external speakers plugged in, the same happens, but disconnecting one speaker leads to a marked reduction of the banding. * When no speaker is connected (uncorded plug in speaker jack), there is no banding. Note that I have disabled the built-in microphone in the connected computer, and the speaker volume - related waterfall noise increase is not diminished when I muffle the radio speaker by putting a book over it; nor do I see any reaction when I whistle into the laptop's microphone. My best guess at this time is that the added noise is caused either inductively by speaker current affecting the radio's isolation transformers, or the speaker amp current draw causing a variation in supply voltage, maybe only in a local part of the radio. I have not yet checked the power supply for hum etc. There might also be some grounding deficiency, as I have not done any bonding between the boxes. The waterfall shows a couple of constant audio tones of moderated strength, located at about 1185 Hz and about 2370 Hz (if I can trust the calibration within MMVARI). Years ago I did the hardware mod's relating to the speaker amp, but I haven't checked for recent mod's. Any comments or suggestions are welcome! Thanks and 73, Erik K7TV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line-Out help needed
My Line-Out level on my K3 was too low, was Set to level of 010 had to increase higher to make things work to level > 022 Thanks. 73 Mike On Sun, 6/7/15, Ed Muns wrote: Subject: Re: [Elecraft] K3 Line-Out help needed To: "Michael Aust" Cc: elecraft@mailman.qth.net Date: Sunday, June 7, 2015, 6:39 AM What level is LIN OUT set to in the CONFIG menu?73,Ed W0YKOn Jun 6, 2015 10:33 PM, Michael Aust wrote: Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to e...@w0yk.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line-Out help needed
What level is LIN OUT set to in the CONFIG menu? 73, Ed W0YK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line-Out help needed
Got it to work, my Line-Out needed to increase to 022 instead of 010 to make it workThanks Mike On Saturday, June 6, 2015 11:12 PM, "wb6r...@mac.com" wrote: Check the setting of LIN OUT in the config menu. Try NOR 010. GL - Steve WB6RSE On Jun 6, 2015, at 10:33 PM, Michael Aust wrote: Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line-Out help needed
Hi Mike, Check the CONFIG:LIN OUT value. It should be about 10 or so. When you are in that menu tap the 1 key to make sure it isn’t =Phones. Good luck. 73, Fred KE7X Author of: "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 – Going for the summit" “The Elecraft KPA500 and KAT500 – the K-Line Dream Station” Printed, coil bound copies of these are all available at www.elecraft.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide KAT500 and KXPA500 Tuner Operation http://www.ke7x.com/home/kat500-and-kxpa100-tuners and brand new “The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” available at www.lulu.com. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Michael Aust Sent: Saturday, June 06, 2015 11:34 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Line-Out help needed Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@ece.montana.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Line-Out help needed
Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 line out
Jim, A shot in the dark here but, is it possible you have line out set to "Phones" ? "Note: Normally, LIN OUT sets a fixed-level receive-only output for main/sub (L/R), compatible with digital modes. Tappingswitches LIN OUT to =PHONES, where the line outputs match headphone audio, audio level is controlled by AF/SUB gain controls, and both RX and TX audio are available." Rick K6LE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 line out
Dear Jim: Something is screwy. I run the same sound card, but usually run around level 10 on the k3 to put the input in the middle of the Tascam input level knob range. Make sure you are using the right input jack on the Tascam, and the line out on the k3. When I used an internal sound card on a laptop with a too-sensitive mic input, I used a cheap Radio Shack headphone cable with an inline volume control. I ran that on EME for years and it worked like a charm. 73, Eric WD6DBM Sent from the metering jack on my Heathkit Twoer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line Out level
On 1/8/2013 1:50 PM, Jim Sheldon wrote: TASCAM US-100 which input are you using on the Tascam? rca or XLRyou should use the RCA and have the input selector switch on back of the tascam set to line. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line Out level
Radio Shack also has one. Look carefully in the stores. 73, ... Joe, W4TV On 1/8/2013 4:32 PM, Ron D'Eau Claire wrote: If you aren't into making up your own, there are cables available that contain a suitable attenuator. A quick net check turned up this one: http://www.core-sound.com/attenuator-cables.html 73 Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of iain macdonnell - N6ML Sent: Tuesday, January 08, 2013 10:57 AM To: Jim Sheldon Cc: Elecraft Mailing List Subject: Re: [Elecraft] [K3] Line Out level I usually run the line out level around 20. If you need it to be less than 1, you must be feeding a mic level input. Sounds like you need to add an attenuator, if you can't use a line-level input. 73, ~iain / N6ML On Tue, Jan 8, 2013 at 10:50 AM, Jim Sheldon wrote: Is there any chance of getting the K3's line out level lowered? Even when set to it's lowest level of 1, it puts out a bit too much audio for my TASCAM US-100 external sound card. The TASCAM has an external input level control and even with it all the way down, the K3 puts out too much audio for all the sound card apps I use (Digipan, MMTTY, FLDIGI, etc). If set to zero, then there's no output at all. The output level for #1 in the menu should be about half or maybe even a quarter of what it is now. That would also allow the various Windows mixers a lot better control over the soundcard input level too. Jim - W0EB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line Out level
If you aren't into making up your own, there are cables available that contain a suitable attenuator. A quick net check turned up this one: http://www.core-sound.com/attenuator-cables.html 73 Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of iain macdonnell - N6ML Sent: Tuesday, January 08, 2013 10:57 AM To: Jim Sheldon Cc: Elecraft Mailing List Subject: Re: [Elecraft] [K3] Line Out level I usually run the line out level around 20. If you need it to be less than 1, you must be feeding a mic level input. Sounds like you need to add an attenuator, if you can't use a line-level input. 73, ~iain / N6ML On Tue, Jan 8, 2013 at 10:50 AM, Jim Sheldon wrote: > Is there any chance of getting the K3's line out level lowered? Even when set to it's lowest level of 1, it puts out a bit too much audio for my TASCAM US-100 external sound card. The TASCAM has an external input level control and even with it all the way down, the K3 puts out too much audio for all the sound card apps I use (Digipan, MMTTY, FLDIGI, etc). > > If set to zero, then there's no output at all. The output level for #1 in the menu should be about half or maybe even a quarter of what it is now. That would also allow the various Windows mixers a lot better control over the soundcard input level too. > > Jim - W0EB > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line Out level
I usually run the line out level around 20. If you need it to be less than 1, you must be feeding a mic level input. Sounds like you need to add an attenuator, if you can't use a line-level input. 73, ~iain / N6ML On Tue, Jan 8, 2013 at 10:50 AM, Jim Sheldon wrote: > Is there any chance of getting the K3's line out level lowered? Even when > set to it's lowest level of 1, it puts out a bit too much audio for my TASCAM > US-100 external sound card. The TASCAM has an external input level control > and even with it all the way down, the K3 puts out too much audio for all the > sound card apps I use (Digipan, MMTTY, FLDIGI, etc). > > If set to zero, then there's no output at all. The output level for #1 in > the menu should be about half or maybe even a quarter of what it is now. That > would also allow the various Windows mixers a lot better control over the > soundcard input level too. > > Jim - W0EB > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line Out level
Jim, I'm not familiar w/ your Tascam, but perhaps it's setup as a mic level input (as opposed to line level)? just a thought... 73, Jeff KC9WSJ On Tue, Jan 08, 2013 at 12:50:05PM -0600, Jim Sheldon wrote: > Is there any chance of getting the K3's line out level lowered? Even when > set to it's lowest level of 1, it puts out a bit too much audio for my TASCAM > US-100 external sound card. The TASCAM has an external input level control > and even with it all the way down, the K3 puts out too much audio for all the > sound card apps I use (Digipan, MMTTY, FLDIGI, etc). > > If set to zero, then there's no output at all. The output level for #1 in > the menu should be about half or maybe even a quarter of what it is now. That > would also allow the various Windows mixers a lot better control over the > soundcard input level too. > > Jim - W0EB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] Line Out level
Is there any chance of getting the K3's line out level lowered? Even when set to it's lowest level of 1, it puts out a bit too much audio for my TASCAM US-100 external sound card. The TASCAM has an external input level control and even with it all the way down, the K3 puts out too much audio for all the sound card apps I use (Digipan, MMTTY, FLDIGI, etc). If set to zero, then there's no output at all. The output level for #1 in the menu should be about half or maybe even a quarter of what it is now. That would also allow the various Windows mixers a lot better control over the soundcard input level too. Jim - W0EB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 line out - Stereo vs Mono
Paul, Now that I have an answer to that I'll go with the recommended K3 RX <--> PC TX and K3 <--> TX to PC RX (solving the exchange of audio) I would not bother connecting the RASCAL's receive side. Simply use the stereo audio cable between the K3 "Line Out" and the PC "Line IN". Reserve the RASCAL for the FSK/PTT connection to the K3's AUX. Can I use the RCA PTT IN jack on the back of the rig to key it for RTTY, PSK, JT65, etc.? I prefer FSK to AFSK and hence would rather use PTT instead of VOX. Sure you can. However, if you already have the RASCAL and it provides a PTT connection to the AUX jack, why not use it for PTT even with PSK/JT65A/etc.? I assume the RASCAL is an FSK interface with RX audio from Line Out and FSK/PTT to AUX (DB15HD). If, on the other hand, RASCAL is a simple passive audio box with a serial control port, connect the PTT line from it to the RCA PTT jack and use two stereo audio cables from the K3 to the computer sound card (you don't want to cascade transformers - it's unnecessary and prone to distortion given the quality of the transformers in some external boxes). 73, ... Joe, W4TV On 12/6/2012 9:42 PM, Paul M Dunphy wrote: On 12/6/2012 9:29 PM, Don Wilhelm wrote: Paul, I believe you may be trying to address too many issues at once. Take then one at a time. As far as the speaker goes, I suggest the safest solution is to re-wire the plug to a stereo plug using only the tip and the shell. Look st the plug - if the plug does not have a ring on it, then it is not a stereo plug. The speakers question does not have any direct relationship with the MMTTY input. 73, Don W3FPR Hi Don, I provided too much info. I do not want to ever use an external speaker. I use stereo headphones 99% of the time, and for the few times I don't, I'll use the K3's stock speakers . . . My concern was the warning in the manual errata saying that if one did use an external speaker with a mono plug, you could damage the right channel amplifier (unless you made the suggested menu changes.) The Line Out is labelled stereo, and like the eternal speaker one, it has the same triangle icon with an exclamation mark beside it. I was concerned that plugging a mono plug into it would risk the same potential danger as plugging a mono plug into the external speak jack. In a subsequent post, Joe W4TV, says the warnings do not apply to the Line Out because it contains current limiting resistors. That was the main reason for my question. I gave too much background and and lead in . . . I should have simply said: Is it OK to use a mono plug in the stereo Line Out K3's jack? Now that I have an answer to that I'll go with the recommended K3 RX <--> PC TX and K3 <--> TX to PC RX (solving the exchange of audio) Next (and hopefully last question): Can I use the RCA PTT IN jack on the back of the rig to key it for RTTY, PSK, JT65, etc.? I prefer FSK to AFSK and hence would rather use PTT instead of VOX. 73, Paul VE1DX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 line out - Stereo vs Mono
On 12/6/2012 9:29 PM, Don Wilhelm wrote: Paul, I believe you may be trying to address too many issues at once. Take then one at a time. As far as the speaker goes, I suggest the safest solution is to re-wire the plug to a stereo plug using only the tip and the shell. Look st the plug - if the plug does not have a ring on it, then it is not a stereo plug. The speakers question does not have any direct relationship with the MMTTY input. 73, Don W3FPR Hi Don, I provided too much info. I do not want to ever use an external speaker. I use stereo headphones 99% of the time, and for the few times I don't, I'll use the K3's stock speakers . . . My concern was the warning in the manual errata saying that if one did use an external speaker with a mono plug, you could damage the right channel amplifier (unless you made the suggested menu changes.) The Line Out is labelled stereo, and like the eternal speaker one, it has the same triangle icon with an exclamation mark beside it. I was concerned that plugging a mono plug into it would risk the same potential danger as plugging a mono plug into the external speak jack. In a subsequent post, Joe W4TV, says the warnings do not apply to the Line Out because it contains current limiting resistors. That was the main reason for my question. I gave too much background and and lead in . . . I should have simply said: Is it OK to use a mono plug in the stereo Line Out K3's jack? Now that I have an answer to that I'll go with the recommended K3 RX <--> PC TX and K3 <--> TX to PC RX (solving the exchange of audio) Next (and hopefully last question): Can I use the RCA PTT IN jack on the back of the rig to key it for RTTY, PSK, JT65, etc.? I prefer FSK to AFSK and hence would rather use PTT instead of VOX. 73, Paul VE1DX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 line out - Stereo vs Mono
Paul, The short answer is the warnings do not apply to Line Out. Line Out is always stereo but both right and left are transformer coupled (you don't need the Rascal) and the primaries of both transformers contain resistors that would limit current from the DAC to a safe level even of the output of the transformer were shorted. I refer you to the K3 Schematic package on the Elecraft web site. 73, ... Joe, W4TV On 12/6/2012 8:15 PM, Paul M Dunphy wrote: Does anyone know if the warning mentioned here in relation an external speaker and a mono speaker applies to the K3's line out (which is also stereo): http://www.elecraft.com/manual/E740107E%20K3%20Owner%27s%20man%20errata%20D10-1.pdf The reason I ask is I have an old Buxcom Rascal circa 2007-2008 that I used for RTTY and PSK on my ICOM PRO3 with great success . . . was thinking of just getting the K3 cable (Part 5DK3) and using it with MMTTY as I had been doing. The concern is the 1/8" plugs on the 5DK3 look to be mono for both audio in and audio out on it's schematic diagram. http://www.packetradio.com/catalog/index.php?main_page=product_info&products_id=2514 It's hard to see because the diagram is so small, but I am 99% sure they are 1/8" mono plugs. I want to do FSK, not AFSK. Otherwise I'd just use a couple of stereo 1/8" inch cables to the computer. Seeing as the Buxcom Rascal and 5DK3 combo will key the RCA PTT as well as handle the TX and RX audio, I was going to go that route. Just switch the old ICOM cable with the 5DK3. Has anyone done this? Seems like a simple way . .. on the PRO3 I used this setup for RTTY, PSK, JT65, etc. I also read that you shouldn't try to key the PTT line using the DB9 serial communications port, and since the Rascal is already working with MMTTY . . . 73, Paul VE1DX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 line out - Stereo vs Mono
Paul, I believe you may be trying to address too many issues at once. Take then one at a time. As far as the speaker goes, I suggest the safest solution is to re-wire the plug to a stereo plug using only the tip and the shell. Look st the plug - if the plug does not have a ring on it, then it is not a stereo plug. The speakers question does not have any direct relationship with the MMTTY input. 73, Don W3FPR On 12/6/2012 8:15 PM, Paul M Dunphy wrote: Does anyone know if the warning mentioned here in relation an external speaker and a mono speaker applies to the K3's line out (which is also stereo): http://www.elecraft.com/manual/E740107E%20K3%20Owner%27s%20man%20errata%20D10-1.pdf The reason I ask is I have an old Buxcom Rascal circa 2007-2008 that I used for RTTY and PSK on my ICOM PRO3 with great success . . . was thinking of just getting the K3 cable (Part 5DK3) and using it with MMTTY as I had been doing. The concern is the 1/8" plugs on the 5DK3 look to be mono for both audio in and audio out on it's schematic diagram. http://www.packetradio.com/catalog/index.php?main_page=product_info&products_id=2514 It's hard to see because the diagram is so small, but I am 99% sure they are 1/8" mono plugs. I want to do FSK, not AFSK. Otherwise I'd just use a couple of stereo 1/8" inch cables to the computer. Seeing as the Buxcom Rascal and 5DK3 combo will key the RCA PTT as well as handle the TX and RX audio, I was going to go that route. Just switch the old ICOM cable with the 5DK3. Has anyone done this? Seems like a simple way . .. on the PRO3 I used this setup for RTTY, PSK, JT65, etc. I also read that you shouldn't try to key the PTT line using the DB9 serial communications port, and since the Rascal is already working with MMTTY . . . __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 line out - Stereo vs Mono
Does anyone know if the warning mentioned here in relation an external speaker and a mono speaker applies to the K3's line out (which is also stereo): http://www.elecraft.com/manual/E740107E%20K3%20Owner%27s%20man%20errata%20D10-1.pdf The reason I ask is I have an old Buxcom Rascal circa 2007-2008 that I used for RTTY and PSK on my ICOM PRO3 with great success . . . was thinking of just getting the K3 cable (Part 5DK3) and using it with MMTTY as I had been doing. The concern is the 1/8" plugs on the 5DK3 look to be mono for both audio in and audio out on it's schematic diagram. http://www.packetradio.com/catalog/index.php?main_page=product_info&products_id=2514 It's hard to see because the diagram is so small, but I am 99% sure they are 1/8" mono plugs. I want to do FSK, not AFSK. Otherwise I'd just use a couple of stereo 1/8" inch cables to the computer. Seeing as the Buxcom Rascal and 5DK3 combo will key the RCA PTT as well as handle the TX and RX audio, I was going to go that route. Just switch the old ICOM cable with the 5DK3. Has anyone done this? Seems like a simple way . .. on the PRO3 I used this setup for RTTY, PSK, JT65, etc. I also read that you shouldn't try to key the PTT line using the DB9 serial communications port, and since the Rascal is already working with MMTTY . . . 73, Paul VE1DX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 line out not working?
Check the RF chokes in the Line Out circuit (KIO3: Audio I/O board). I've seen the choke in the ground (return) circuit fail on a couple occasions. 73, ... Joe, W4TV On 9/30/2011 5:56 PM, David Christ wrote: > I was going to work some digital modes today and was not getting any > waterfall information. the line out level configuration was at 10 as > suggested by Elecraft. > > I plugged a set of stereo earphones into the line out jack and got no > sound at all. > > Any suggestions about what to do next? > > David K0LUM > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 line out not working?
I was going to work some digital modes today and was not getting any waterfall information. the line out level configuration was at 10 as suggested by Elecraft. I plugged a set of stereo earphones into the line out jack and got no sound at all. Any suggestions about what to do next? David K0LUM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 line out
KK7P wrote: > > You can set Line Out=Phones and get the audio mixer, but the output > level will also vary with the AF Gain control in that case. > Beautiful - thanks Lyle (for the response and for coding the feature)! 73, Barry N1EU -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-line-out-tp5925339p5925420.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 line out
It is by design. Line out is Left for main Rx and Right for Sub Rx. You can set Line Out=Phones and get the audio mixer, but the output level will also vary with the AF Gain control in that case. 73, Lyle KK7P > Can some other folks please check their K3 line out and please let me know > if you hear the same thing? Perhaps this is by design. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 line out
I've starting using the K3 line out for the first time driving some powered speakers and really enjoying some great sounds. But I was surprised to find that with my subreceiver turned OFF, there is no audio on the line out right channel. I was expecting mono audio with main rx heard through both L & R channels. The subreceiver audio comes through fine on the right channel when it's turned on. Can some other folks please check their K3 line out and please let me know if you hear the same thing? Perhaps this is by design. Thanks & 73, Barry N1EU -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-line-out-tp5925339p5925339.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
I have another question that's somewhat related to my original post. I know it has been discussed many times over; that one should avoid using a mono plug in the SPKRS jack. What I'd like to know though is this: Would it be OK to use a mono plug in either front panel PHONES output, or rear panel PHONE or LINE output without fear of blowing something up? Manual says it should be fine, but just want to get confirmation beforehand that this is OK to do. Tnx! -- 73 de James K2QI President UNARC/4U1UN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
On Nov 27, 2010, at 11/275:14 AM, Joe Subich, W4TV wrote: > MixW has a dual [RTTY] receive capability - I don't know about any > of the other software. On the Mac OS X side, cocoaModem has two independent receive channels in the "wideband RTTY" and the "dual RTTY" interfaces. There are two identical sets of user interfaces in a single window -- this gets rid of the "window focus" problem of running multiple copies of a software modem. There are two cross ellipses, independent mark and space tones, baud rate, and filter settings -- you can even run 75 baud and Mark-only on one decoder, while running 45.45 baud and Mark/Space decoding on the other. In the case of "wideband RTTY," there are independent waterfalls. Dual RTTY decode has been in practice in some time now. In the old days, it was done with multiple TU -- this is one of the reasons why normally sane people have multiple HAL ST-8000 in the shack. Just like other modes, having concurrent receive capability on on both the DX and a split pile reduces "doubling." Using multiple TU back then required manually scanning the pileup using the VFO knob. If you have a waterfall that is watching the pile, you can pretty much pinpoint the DX's QSX by watching where a signal appears in the pileup waterfall right after the DX finishes sending his exchange. A software modem that is capable of agile transmit can then pounce on that QSX (or find the next hole in the direction the DX is tuning). It used to be like shooting fish in a barrel for people with two RTTY decoders and agile receive (e.g., waterfall tuning) to work the split RTTY pileups. Just ask RTTY DXers who have been using cocoaModem's "wideband RTTY" interface. But more people have that capability today (what with the Flex-5000 and the LP-PAN), to the point that if you don't have dual decoding and agile tuning capability, you are now at a distinct disadvantage. Of course you need a sound card that has two or more inputs (or a digital interface like the microKeyer/digiKeyer). Some of the cheaper digital interfaces are only wired for a single input channel, even when the codec is a stereo one. 73 Chen, W7AY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
> I just looked into MMTTY and saw (for the first time) the ability to > select mono, left, or right. Kewl! :-P Yes, if you're not trying to copy both signals at the same time (e.g., split RTTY DX), you can use MMTTY's ability to select Left or Right to select Main/Sub without running two copies. 73, ... Joe, W4TV On 11/27/2010 10:45 AM, Mike wrote: > I'm not suggesting mixing signals, in fact I'm trying to arrive at a method of > conveniently eliminating one of them. > > I just looked into MMTTY and saw (for the first time) the ability to select > mono, > left, or right. Kewl! :-P > > 73, Mike NF4L > > > On 11/27/2010 9:26 AM, Joe Subich, W4TV wrote: >>> I suppose the Windoze mixer could be used to set the balance. Or cut >>> a wire in the audio cable. >> >> You don't want to mix the signals ... they would QRM each other. I >> can't see any reason for mixing them and running independent copies >> of MMTTY or MixW in the dual channel mode is the best way to "select" >> the signal. >> >> 73, >> >> ... Joe, W4TV >> >> On 11/27/2010 8:58 AM, Mike wrote: >>> Joe, if you mean stand alone MMTTY, I don't understand. I wouldn't want to >>> copy copy >>> both signals. >>> Each copy of MMTTY could use a different sound card (given 2 sound cards) >>> but still >>> no way to direct sound by channel. >>> >>> I suppose the Windoze mixer could be used to set the balance. Or cut a wire >>> in the >>> audio cable. >>> >>> All that strikes me as a kludge, but I certainly don't have a better >>> solution. :-( >>> >>> Mike NF4L >>> >>> >>> On 11/27/2010 8:14 AM, Joe Subich, W4TV wrote: >>> I don't have a sub rx, so it's never been a problem for me, but I'm >> thinking of adding one. How does that work if there's a RTTY >> signal on both VFO's (simplex)? Would you have to tap A>B? The best way to handle RTTY with signals on both receivers is to run two copies of MMTTY (or other decoder) - one for reach receiver. MixW has a dual receive capability - I don't know about any of the other software. In general, one decoder uses the soundcard left channel and the second uses soundcard right channel audio. Mixing the two audio streams does not work ... it merely results in QRM. 73, ... Joe, W4TV > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
Richard, The problem is, as usual, my lack of understanding of how something works. Now that I realize that MMTTY can select either channel, I get it. Unfortunately my PSK software can't do that. :-( Thanks to both you and Joe for the guidance. 73, Mike NF4L On 11/27/2010 10:54 AM, Richard Ferch wrote: > Mike, > > I don't understand why you think there is a problem. I guess I don't > understand what you are trying to do. > > The hardware setup to use both receivers in RTTY is simple, and no > different from what you use with a single receiver - a single stereo > cable from the K3's LINE OUT to the sound card's LINE IN for receive, a > single mono (or stereo) cable from the sound card's LINE OUT to the K3's > LINE IN for AFSK transmit, and use RTS on the radio control port for > PTT. Or, if you prefer FSK, replace the AFSK transmit cable with FSK and > PTT keying circuits to the AUX input. > > There is no need for a second sound card, no need to cut cables, no need > to use a mixer to adjust balance. > > You set up one copy of MMTTY to receive using only the left channel of a > single sound card, and a separate copy of MMTTY to receive using only > the right channel of the same sound card. The two operate entirely > independently. One decodes the signal from the main receiver, the other > one from the sub receiver. If you only want to copy one signal, just > don't look at the output from the other copy of MMTTY, or if you find it > distracting, just turn SUB off and/or close down the second copy of MMTTY. > > From N1MM Logger, you can open two Entry windows, one for each VFO, and > open a separate Digital Interface window from each Entry window, with > separate copies of MMTTY each configured to use the appropriate channel > of the sound card. You can receive on both receivers at once, and choose > which one to transmit to with the "\" key. Or, if you only want to use > one VFO, just close down the second Entry window. > > 73, > Rich VE3KI > > > NF4L wrote: > >> All that strikes me as a kludge, but I certainly don't have a better >> solution. :-( >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
Mike, I don't understand why you think there is a problem. I guess I don't understand what you are trying to do. The hardware setup to use both receivers in RTTY is simple, and no different from what you use with a single receiver - a single stereo cable from the K3's LINE OUT to the sound card's LINE IN for receive, a single mono (or stereo) cable from the sound card's LINE OUT to the K3's LINE IN for AFSK transmit, and use RTS on the radio control port for PTT. Or, if you prefer FSK, replace the AFSK transmit cable with FSK and PTT keying circuits to the AUX input. There is no need for a second sound card, no need to cut cables, no need to use a mixer to adjust balance. You set up one copy of MMTTY to receive using only the left channel of a single sound card, and a separate copy of MMTTY to receive using only the right channel of the same sound card. The two operate entirely independently. One decodes the signal from the main receiver, the other one from the sub receiver. If you only want to copy one signal, just don't look at the output from the other copy of MMTTY, or if you find it distracting, just turn SUB off and/or close down the second copy of MMTTY. From N1MM Logger, you can open two Entry windows, one for each VFO, and open a separate Digital Interface window from each Entry window, with separate copies of MMTTY each configured to use the appropriate channel of the sound card. You can receive on both receivers at once, and choose which one to transmit to with the "\" key. Or, if you only want to use one VFO, just close down the second Entry window. 73, Rich VE3KI NF4L wrote: > All that strikes me as a kludge, but I certainly don't have a better > solution. :-( > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
I'm not suggesting mixing signals, in fact I'm trying to arrive at a method of conveniently eliminating one of them. I just looked into MMTTY and saw (for the first time) the ability to select mono, left, or right. Kewl! :-P 73, Mike NF4L On 11/27/2010 9:26 AM, Joe Subich, W4TV wrote: > > I suppose the Windoze mixer could be used to set the balance. Or cut > > a wire in the audio cable. > > You don't want to mix the signals ... they would QRM each other. I > can't see any reason for mixing them and running independent copies > of MMTTY or MixW in the dual channel mode is the best way to "select" > the signal. > > 73, > > ... Joe, W4TV > > On 11/27/2010 8:58 AM, Mike wrote: >> Joe, if you mean stand alone MMTTY, I don't understand. I wouldn't want to >> copy copy >> both signals. >> Each copy of MMTTY could use a different sound card (given 2 sound cards) >> but still >> no way to direct sound by channel. >> >> I suppose the Windoze mixer could be used to set the balance. Or cut a wire >> in the >> audio cable. >> >> All that strikes me as a kludge, but I certainly don't have a better >> solution. :-( >> >> Mike NF4L >> >> >> On 11/27/2010 8:14 AM, Joe Subich, W4TV wrote: >> I don't have a sub rx, so it's never been a problem for me, but I'm > thinking of adding one. How does that work if there's a RTTY > signal on both VFO's (simplex)? Would you have to tap A>B? >>> The best way to handle RTTY with signals on both receivers is to run >>> two copies of MMTTY (or other decoder) - one for reach receiver. MixW >>> has a dual receive capability - I don't know about any of the other >>> software. In general, one decoder uses the soundcard left channel >>> and the second uses soundcard right channel audio. Mixing the two >>> audio streams does not work ... it merely results in QRM. >>> >>> 73, >>> >>>... Joe, W4TV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
> I suppose the Windoze mixer could be used to set the balance. Or cut > a wire in the audio cable. You don't want to mix the signals ... they would QRM each other. I can't see any reason for mixing them and running independent copies of MMTTY or MixW in the dual channel mode is the best way to "select" the signal. 73, ... Joe, W4TV On 11/27/2010 8:58 AM, Mike wrote: > Joe, if you mean stand alone MMTTY, I don't understand. I wouldn't want to > copy copy > both signals. > Each copy of MMTTY could use a different sound card (given 2 sound cards) but > still > no way to direct sound by channel. > > I suppose the Windoze mixer could be used to set the balance. Or cut a wire > in the > audio cable. > > All that strikes me as a kludge, but I certainly don't have a better > solution. :-( > > Mike NF4L > > > On 11/27/2010 8:14 AM, Joe Subich, W4TV wrote: > I don't have a sub rx, so it's never been a problem for me, but I'm thinking of adding one. How does that work if there's a RTTY signal on both VFO's (simplex)? Would you have to tap A>B? >> The best way to handle RTTY with signals on both receivers is to run >> two copies of MMTTY (or other decoder) - one for reach receiver. MixW >> has a dual receive capability - I don't know about any of the other >> software. In general, one decoder uses the soundcard left channel >> and the second uses soundcard right channel audio. Mixing the two >> audio streams does not work ... it merely results in QRM. >> >> 73, >> >> ... Joe, W4TV >> >> >> On 11/27/2010 5:34 AM, Mike wrote: >>> Re: point #2. >>> >>> I don't have a sub rx, so it's never been a problem for me, but I'm >>> thinking of >>> adding one. How does that work if there's a RTTY signal on both VFO's >>> (simplex)? >>> Would you have to tap A>B? >>> >>> The manual sez "Use CONFIG: LIN OUT to set the level, or to switch from a >>> fixed-level >>> setting to =PHONES." Does that give you a level control using the AF knob? >>> >>> 73, Mike NF4L >>> >>> On 11/26/2010 11:52 PM, Richard Ferch wrote: James, I hope your daughter is feeling better soon. Re your questions (based on my observations using sound card software on both channels from the LINE OUT jack, and stereo headphones plugged into the SPKRS jack): 1. The CONFIG:SPKRS setting only affects the rear panel SPKRS jack. It has no effect on LINE OUT. 2. None of the audio mixing or level controls has any effect on the LINE OUT signal, as far as I can tell. The left channel always carries the main RX output, and the right channel always carries the sub RX output. The LINE output is "raw" unmixed audio from the two receivers at a fixed level set by CONFIG:LIN OUT. 3. When CONFIG:SPKRS = 2, the SPKRS jack behaves the same as the headphone jacks. With SUB off, the main RX is in both channels, and with SUB on and the normal L-MIX-R setting, the main RX and sub RX are in left and right channels respectively. Changing the L-MIX-R setting affects the SPKRS the same way as it affects the PHONES output. When CONFIG:SPKRS = 1, the only speaker output is on the left channel of the SPKRS jack, i.e. it disables the right channel output even when SUB is on. If SUB is on, the external mono speaker on the left channel carries audio from both receivers mixed together, the same as the internal speaker. The purpose of the CONFIG:SPKRS = 1 option is to protect the speaker amp if a mono plug is plugged into the SPKRS jack. 73, Rich VE3KI > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
Joe, if you mean stand alone MMTTY, I don't understand. I wouldn't want to copy copy both signals. Each copy of MMTTY could use a different sound card (given 2 sound cards) but still no way to direct sound by channel. I suppose the Windoze mixer could be used to set the balance. Or cut a wire in the audio cable. All that strikes me as a kludge, but I certainly don't have a better solution. :-( Mike NF4L On 11/27/2010 8:14 AM, Joe Subich, W4TV wrote: I don't have a sub rx, so it's never been a problem for me, but I'm >>> thinking of adding one. How does that work if there's a RTTY >>> signal on both VFO's (simplex)? Would you have to tap A>B? > The best way to handle RTTY with signals on both receivers is to run > two copies of MMTTY (or other decoder) - one for reach receiver. MixW > has a dual receive capability - I don't know about any of the other > software. In general, one decoder uses the soundcard left channel > and the second uses soundcard right channel audio. Mixing the two > audio streams does not work ... it merely results in QRM. > > 73, > > ... Joe, W4TV > > > On 11/27/2010 5:34 AM, Mike wrote: >> Re: point #2. >> >> I don't have a sub rx, so it's never been a problem for me, but I'm thinking >> of >> adding one. How does that work if there's a RTTY signal on both VFO's >> (simplex)? >> Would you have to tap A>B? >> >> The manual sez "Use CONFIG: LIN OUT to set the level, or to switch from a >> fixed-level >> setting to =PHONES." Does that give you a level control using the AF knob? >> >> 73, Mike NF4L >> >> On 11/26/2010 11:52 PM, Richard Ferch wrote: >>> James, >>> >>> I hope your daughter is feeling better soon. >>> >>> Re your questions (based on my observations using sound card software on >>> both channels from the LINE OUT jack, and stereo headphones plugged into >>> the SPKRS jack): >>> >>> 1. The CONFIG:SPKRS setting only affects the rear panel SPKRS jack. It >>> has no effect on LINE OUT. >>> >>> 2. None of the audio mixing or level controls has any effect on the LINE >>> OUT signal, as far as I can tell. The left channel always carries the >>> main RX output, and the right channel always carries the sub RX output. >>> The LINE output is "raw" unmixed audio from the two receivers at a fixed >>> level set by CONFIG:LIN OUT. >>> >>> 3. When CONFIG:SPKRS = 2, the SPKRS jack behaves the same as the >>> headphone jacks. With SUB off, the main RX is in both channels, and with >>> SUB on and the normal L-MIX-R setting, the main RX and sub RX are in >>> left and right channels respectively. Changing the L-MIX-R setting >>> affects the SPKRS the same way as it affects the PHONES output. >>> >>> When CONFIG:SPKRS = 1, the only speaker output is on the left channel of >>> the SPKRS jack, i.e. it disables the right channel output even when SUB >>> is on. If SUB is on, the external mono speaker on the left channel >>> carries audio from both receivers mixed together, the same as the >>> internal speaker. The purpose of the CONFIG:SPKRS = 1 option is to >>> protect the speaker amp if a mono plug is plugged into the SPKRS jack. >>> >>> 73, >>> Rich VE3KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
Mike, Thanks for pointing that out - I had completely forgotten about that option. I guess it's time I printed out a new copy of the manual! Of course, that changes the answer to James' question #2; if you want the LINE output to be a clone of the headphones output, set CONFIG:LIN OUT to =PHONES. With CONFIG:LIN OUT =PHONES, when the subRX is off, the main RX is in both channels. This setting seems tailor-made for James' situation (listening to speakers through a sound card). For digital modes, as Joe has pointed out, when SUB is on, you use the two channels to feed two independent copies of MMTTY (or other software). You do not want any mixing of the two signals. Also, you do not want the volume control to affect the audio level going into the decoder. If you use the audio pitch as a tuning aid, you want the ability to turn the audio down or to change the balance between the two channels without interrupting the ongoing decoding of both signals. When SUB is off, you only use (or need) one channel in the sound card. The right channel waterfall just goes black when the sub RX is off. You can use two different decoding algorithms on a single signal by running two (or more) independent decoding programs (e.g. two or more separate copies of MMTTY using different profiles) from a single channel in the sound card. 73, Rich VE3KI NF4L wrote: > Re: point #2. > > I don't have a sub rx, so it's never been a problem for me, but I'm thinking > of > adding one. How does that work if there's a RTTY signal on both VFO's > (simplex)? > Would you have to tap A>B? > > The manual sez "Use CONFIG: LIN OUT to set the level, or to switch from a > fixed-level > setting to =PHONES." Does that give you a level control using the AF knob? > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
>> I don't have a sub rx, so it's never been a problem for me, but I'm >> thinking of adding one. How does that work if there's a RTTY >> signal on both VFO's (simplex)? Would you have to tap A>B? The best way to handle RTTY with signals on both receivers is to run two copies of MMTTY (or other decoder) - one for reach receiver. MixW has a dual receive capability - I don't know about any of the other software. In general, one decoder uses the soundcard left channel and the second uses soundcard right channel audio. Mixing the two audio streams does not work ... it merely results in QRM. 73, ... Joe, W4TV On 11/27/2010 5:34 AM, Mike wrote: > Re: point #2. > > I don't have a sub rx, so it's never been a problem for me, but I'm thinking > of > adding one. How does that work if there's a RTTY signal on both VFO's > (simplex)? > Would you have to tap A>B? > > The manual sez "Use CONFIG: LIN OUT to set the level, or to switch from a > fixed-level > setting to =PHONES." Does that give you a level control using the AF knob? > > 73, Mike NF4L > > On 11/26/2010 11:52 PM, Richard Ferch wrote: >> James, >> >> I hope your daughter is feeling better soon. >> >> Re your questions (based on my observations using sound card software on >> both channels from the LINE OUT jack, and stereo headphones plugged into >> the SPKRS jack): >> >> 1. The CONFIG:SPKRS setting only affects the rear panel SPKRS jack. It >> has no effect on LINE OUT. >> >> 2. None of the audio mixing or level controls has any effect on the LINE >> OUT signal, as far as I can tell. The left channel always carries the >> main RX output, and the right channel always carries the sub RX output. >> The LINE output is "raw" unmixed audio from the two receivers at a fixed >> level set by CONFIG:LIN OUT. >> >> 3. When CONFIG:SPKRS = 2, the SPKRS jack behaves the same as the >> headphone jacks. With SUB off, the main RX is in both channels, and with >> SUB on and the normal L-MIX-R setting, the main RX and sub RX are in >> left and right channels respectively. Changing the L-MIX-R setting >> affects the SPKRS the same way as it affects the PHONES output. >> >> When CONFIG:SPKRS = 1, the only speaker output is on the left channel of >> the SPKRS jack, i.e. it disables the right channel output even when SUB >> is on. If SUB is on, the external mono speaker on the left channel >> carries audio from both receivers mixed together, the same as the >> internal speaker. The purpose of the CONFIG:SPKRS = 1 option is to >> protect the speaker amp if a mono plug is plugged into the SPKRS jack. >> >> 73, >> Rich VE3KI >> >> >> >> >> >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
Re: point #2. I don't have a sub rx, so it's never been a problem for me, but I'm thinking of adding one. How does that work if there's a RTTY signal on both VFO's (simplex)? Would you have to tap A>B? The manual sez "Use CONFIG: LIN OUT to set the level, or to switch from a fixed-level setting to =PHONES." Does that give you a level control using the AF knob? 73, Mike NF4L On 11/26/2010 11:52 PM, Richard Ferch wrote: > James, > > I hope your daughter is feeling better soon. > > Re your questions (based on my observations using sound card software on > both channels from the LINE OUT jack, and stereo headphones plugged into > the SPKRS jack): > > 1. The CONFIG:SPKRS setting only affects the rear panel SPKRS jack. It > has no effect on LINE OUT. > > 2. None of the audio mixing or level controls has any effect on the LINE > OUT signal, as far as I can tell. The left channel always carries the > main RX output, and the right channel always carries the sub RX output. > The LINE output is "raw" unmixed audio from the two receivers at a fixed > level set by CONFIG:LIN OUT. > > 3. When CONFIG:SPKRS = 2, the SPKRS jack behaves the same as the > headphone jacks. With SUB off, the main RX is in both channels, and with > SUB on and the normal L-MIX-R setting, the main RX and sub RX are in > left and right channels respectively. Changing the L-MIX-R setting > affects the SPKRS the same way as it affects the PHONES output. > > When CONFIG:SPKRS = 1, the only speaker output is on the left channel of > the SPKRS jack, i.e. it disables the right channel output even when SUB > is on. If SUB is on, the external mono speaker on the left channel > carries audio from both receivers mixed together, the same as the > internal speaker. The purpose of the CONFIG:SPKRS = 1 option is to > protect the speaker amp if a mono plug is plugged into the SPKRS jack. > > 73, > Rich VE3KI > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
Thank you Rich, My daughter had a severe case of bronchiolitis. I'm happy to say that she's on the mend back at home. Also, I'm grateful for your reply to my questions. You have confirmed my assumptions. 73 and Happy Holidays, James K2QI Sent via BlackBerry from T-Mobile -Original Message- From: Richard Ferch Sender: elecraft-boun...@mailman.qth.net Date: Fri, 26 Nov 2010 23:52:09 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings... James, I hope your daughter is feeling better soon. Re your questions (based on my observations using sound card software on both channels from the LINE OUT jack, and stereo headphones plugged into the SPKRS jack): 1. The CONFIG:SPKRS setting only affects the rear panel SPKRS jack. It has no effect on LINE OUT. 2. None of the audio mixing or level controls has any effect on the LINE OUT signal, as far as I can tell. The left channel always carries the main RX output, and the right channel always carries the sub RX output. The LINE output is "raw" unmixed audio from the two receivers at a fixed level set by CONFIG:LIN OUT. 3. When CONFIG:SPKRS = 2, the SPKRS jack behaves the same as the headphone jacks. With SUB off, the main RX is in both channels, and with SUB on and the normal L-MIX-R setting, the main RX and sub RX are in left and right channels respectively. Changing the L-MIX-R setting affects the SPKRS the same way as it affects the PHONES output. When CONFIG:SPKRS = 1, the only speaker output is on the left channel of the SPKRS jack, i.e. it disables the right channel output even when SUB is on. If SUB is on, the external mono speaker on the left channel carries audio from both receivers mixed together, the same as the internal speaker. The purpose of the CONFIG:SPKRS = 1 option is to protect the speaker amp if a mono plug is plugged into the SPKRS jack. 73, Rich VE3KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
James, I hope your daughter is feeling better soon. Re your questions (based on my observations using sound card software on both channels from the LINE OUT jack, and stereo headphones plugged into the SPKRS jack): 1. The CONFIG:SPKRS setting only affects the rear panel SPKRS jack. It has no effect on LINE OUT. 2. None of the audio mixing or level controls has any effect on the LINE OUT signal, as far as I can tell. The left channel always carries the main RX output, and the right channel always carries the sub RX output. The LINE output is "raw" unmixed audio from the two receivers at a fixed level set by CONFIG:LIN OUT. 3. When CONFIG:SPKRS = 2, the SPKRS jack behaves the same as the headphone jacks. With SUB off, the main RX is in both channels, and with SUB on and the normal L-MIX-R setting, the main RX and sub RX are in left and right channels respectively. Changing the L-MIX-R setting affects the SPKRS the same way as it affects the PHONES output. When CONFIG:SPKRS = 1, the only speaker output is on the left channel of the SPKRS jack, i.e. it disables the right channel output even when SUB is on. If SUB is on, the external mono speaker on the left channel carries audio from both receivers mixed together, the same as the internal speaker. The purpose of the CONFIG:SPKRS = 1 option is to protect the speaker amp if a mono plug is plugged into the SPKRS jack. 73, Rich VE3KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Line out, speakers, and L-mix-R settings...
No suggestions? Hope everyone had a good thanksgiving. I know mine is about to start; my 11mo daughter just came home from pediatric ICU. I am thankful for that. 73, James K2QI On Wed, Nov 24, 2010 at 10:19 PM, James Sarte (K2QI) wrote: > Curious thing I noticed today; plugged in my headphones only to continue > hearing monoraul audio coming out of my PC's speakers. It took me a second > to realize that audio from the K3 was being piped out of the LINE OUT jack > in the rear, into my PC's input, and out to the two speakers I have sitting > on my desk. > > At first I thought it was strange that the audio I was hearing was only > coming out of the left speaker rather than both. I checked the manual and > after a few minutes of reading realized that under normal situations, > activating the SUB would provide the right channel. I then started playing > around a bit more, and figured I'd post this question to the group just to > make sure I understand how these functions work properly. > > My experimentation led me to the SPKRS settings which was currently set at > 1. With the SUB off, I changed the speaker setting to 2 but no change; > audio was still being heard on the left speaker and not the right. Am I > then correct in my assumption that the speakers setting has no bearing on > the actual number of channels being output from the LINE OUT jack? > > This brings me to my second question - is there a way to get both L and R > channel audio output to the LINE OUT jack just from the main receiver > without the SUB being activated? > > My last question, does the SPEAKERS setting only affect the SPKR OUT jack > on the rear panel? According to the manual, leaving it at 1 will only > provide one channel of audio. Would setting it to 2 provide both L&R > channels to the speakers regardless of SUB activation? > > Mni tnx es happy thanksgiving. > -- > 73 de James K2QI > President UNARC/4U1UN > > -- 73 de James K2QI President UNARC/4U1UN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] Line out, speakers, and L-mix-R settings...
Curious thing I noticed today; plugged in my headphones only to continue hearing monoraul audio coming out of my PC's speakers. It took me a second to realize that audio from the K3 was being piped out of the LINE OUT jack in the rear, into my PC's input, and out to the two speakers I have sitting on my desk. At first I thought it was strange that the audio I was hearing was only coming out of the left speaker rather than both. I checked the manual and after a few minutes of reading realized that under normal situations, activating the SUB would provide the right channel. I then started playing around a bit more, and figured I'd post this question to the group just to make sure I understand how these functions work properly. My experimentation led me to the SPKRS settings which was currently set at 1. With the SUB off, I changed the speaker setting to 2 but no change; audio was still being heard on the left speaker and not the right. Am I then correct in my assumption that the speakers setting has no bearing on the actual number of channels being output from the LINE OUT jack? This brings me to my second question - is there a way to get both L and R channel audio output to the LINE OUT jack just from the main receiver without the SUB being activated? My last question, does the SPEAKERS setting only affect the SPKR OUT jack on the rear panel? According to the manual, leaving it at 1 will only provide one channel of audio. Would setting it to 2 provide both L&R channels to the speakers regardless of SUB activation? Mni tnx es happy thanksgiving. -- 73 de James K2QI President UNARC/4U1UN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 - Line Out
Dick, The line out level is fixed by the menu (CONFIG: LIN OUT), and the SPKRS or PHONES output is variable - controlled by the AF gain. They can be used simultaneously. Both/either will work into a high impedance load. I have been using the SPKRS output to drive a soundcard, a mixer or a set of amplified speakers at various times in the past with no problem - just plug it in and set the AF Gain appropriately. Remember there is a HI and a LO setting for the headphone or speaker outputs available in the menu, you may have to set it to LO. Does that meet your needs? 73, Don W3FPR Edward Dickinson, III wrote: > Using my K3 with a computer and outboard sound as well sound based programs, > both a Fixed-Level and Variable-Level (AF Gain Knob) Line Output > simultaneiously could be useful to me. > > Has a mod been developed that provides both? > > > 73, > > Dick - KA5KKT > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.730 / Virus Database: 271.1.1/2644 - Release Date: 01/25/10 > 02:36:00 > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 - Line Out
Using my K3 with a computer and outboard sound as well sound based programs, both a Fixed-Level and Variable-Level (AF Gain Knob) Line Output simultaneiously could be useful to me. Has a mod been developed that provides both? 73, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Line Out level
> have found that a line output level of 50 is pretty good. Hi James. I use "Audacity" with the "Lame" MP3 plug-in to record beacons and intruders. With the PC sound card mic level at max, I need the K3 Line out at about 20 to get enough audio for Audacity. Can't hear any distortion but I'm not a hi-fi buff. I don't even own any oxygen-free copper mains cables! 73 Gary ZL2iFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Line Out level
James, You will not hurt the K3, but if the transformers saturate, you will get distortion. As long as the level of distortion is OK to your ears, I would judge everything to be OK. 73, Don W3FPR James Sarte wrote: > Greetings to the group! > > Quick question: I normally keep the line out set to 5 or 10; I haven't seen > the need until now to increase it. I recently discovered a recording > utility built in to HRD, and leaving the line out level at 5 or 10 usually > results in a low-volume recording. I've fiddled around with the setting and > have found that a line output level of 50 is pretty good. However, I just > want to make sure that doing so is safe for the K3. I've monitored the > audio from the PC, and I haven't noticed any sort of overdrive condition. > On the other hand, the manual states that setting the line out to anything > above 10 may cause saturation of the KIO3's isolation transformers. > > Thoughts? > Vy 73 and a Happy New Year to all! > > James K2QI > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3: Line Out level
Greetings to the group! Quick question: I normally keep the line out set to 5 or 10; I haven't seen the need until now to increase it. I recently discovered a recording utility built in to HRD, and leaving the line out level at 5 or 10 usually results in a low-volume recording. I've fiddled around with the setting and have found that a line output level of 50 is pretty good. However, I just want to make sure that doing so is safe for the K3. I've monitored the audio from the PC, and I haven't noticed any sort of overdrive condition. On the other hand, the manual states that setting the line out to anything above 10 may cause saturation of the KIO3's isolation transformers. Thoughts? Vy 73 and a Happy New Year to all! James K2QI -- 73 de James K2QI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Line Out in Data Mode?
Dave, Thanks for the suggestion. I'm using a level of "8" ---the manual recommends no more than 10. In sideband I get a good level to the programs I mentioned. In data modes there is absolutely nothing showing on the programs displays. It's like there is absolutely no output from the Line Out on the K3. Have a good day and 73. Jim, W0EM Date: Fri, 16 Oct 2009 11:19:16 +0800 Subject: Re: [Elecraft] K3 Line Out in Data Mode? From: lowb...@gmail.com To: w...@q.com CC: elecraft@mailman.qth.net check your line out setting, maybe you set too low... 73 de ba4rf/Dave On Fri, Oct 16, 2009 at 10:40 AM, Jim Harris wrote: Hi, I've been able to transmit and receive PSK and RTTY in USB & LSB on my new K3. That includes sound out of the Line Out on the rear panel to my computer's sound card. However, in all data modes there is no sound from Line Out to the computer. I've used MMTTY, MMVARI and Hamscope with the same results. I've read everything related in the operators manual without finding anything that will help. Looking for working ideas. Thanks, have a good day and 73. Jim, W0EM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Line Out in Data Mode?
check your line out setting, maybe you set too low... 73 de ba4rf/Dave On Fri, Oct 16, 2009 at 10:40 AM, Jim Harris wrote: > > Hi, > > I've been able to transmit and receive PSK and RTTY in USB & LSB on my new > K3. That includes sound out of the Line Out on the rear panel to my > computer's sound card. However, in all data modes there is no sound from > Line Out to the computer. I've used MMTTY, MMVARI and Hamscope with the > same results. I've read everything related in the operators manual without > finding anything that will help. > > Looking for working ideas. > > Thanks, have a good day and 73. > > Jim, W0EM > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Line Out in Data Mode?
Hi, I've been able to transmit and receive PSK and RTTY in USB & LSB on my new K3. That includes sound out of the Line Out on the rear panel to my computer's sound card. However, in all data modes there is no sound from Line Out to the computer. I've used MMTTY, MMVARI and Hamscope with the same results. I've read everything related in the operators manual without finding anything that will help. Looking for working ideas. Thanks, have a good day and 73. Jim, W0EM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Line out level and Digikeyer
Thanks for that Joe, reassuring to know that levels higher than 10 can be accommodated without problem. >as long as the AGC is set to >reasonably limit audio levels. Well, I use AGC-S and have never felt the need to change any of the other agc parameters so they are all set to default values - presumably this is ok ??? Trevor G0KTN Original Message Trevor, If you have AGC enabled in the K3, the Line Out level can be increased considerably beyond 10. Although I find Line Out at 10 works very well with the DigiKeyer input level at 3:00, I have run the Line Out as high as 70 without distortion as long as the AGC is set to reasonably limit audio levels. 73, ... Joe, W4TV > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Trevor Smithers > Sent: Thursday, October 01, 2009 6:49 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 Line out level and Digikeyer > > > For digimodes like WSPR I use a Microham Digikeyer and set > the K3 Line Out level to 10, which > is the maximum recommended before the possibility of > distortion is introduced. At this level I have > to set the Digikeyer RX input control to max to obtain proper > decoding etc and being at maximum > leaves no room for further adjustment. > > I usually like to set in/out controls to around 50% but in > this case it would mean setting the K3 > Line Out to around 40 to be able to reduce the Digikeyer input by 50% > > So, is Line Out level 10 still the max before > distortion/saturation of the output transformers occurs > or is there any headroom. If 10 is still the number then > fine, as the object is to provide the > cleanest signal to the DigiKeyer soundcard even if the input > does have to be set to max. > > 73 > Trevor G0KTN > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Line out level and Digikeyer
Trevor, If you have AGC enabled in the K3, the Line Out level can be increased considerably beyond 10. Although I find Line Out at 10 works very well with the DigiKeyer input level at 3:00, I have run the Line Out as high as 70 without distortion as long as the AGC is set to reasonably limit audio levels. 73, ... Joe, W4TV > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Trevor Smithers > Sent: Thursday, October 01, 2009 6:49 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 Line out level and Digikeyer > > > For digimodes like WSPR I use a Microham Digikeyer and set > the K3 Line Out level to 10, which > is the maximum recommended before the possibility of > distortion is introduced. At this level I have > to set the Digikeyer RX input control to max to obtain proper > decoding etc and being at maximum > leaves no room for further adjustment. > > I usually like to set in/out controls to around 50% but in > this case it would mean setting the K3 > Line Out to around 40 to be able to reduce the Digikeyer input by 50% > > So, is Line Out level 10 still the max before > distortion/saturation of the output transformers occurs > or is there any headroom. If 10 is still the number then > fine, as the object is to provide the > cleanest signal to the DigiKeyer soundcard even if the input > does have to be set to max. > > 73 > Trevor G0KTN > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Line out level and Digikeyer
For digimodes like WSPR I use a Microham Digikeyer and set the K3 Line Out level to 10, which is the maximum recommended before the possibility of distortion is introduced. At this level I have to set the Digikeyer RX input control to max to obtain proper decoding etc and being at maximum leaves no room for further adjustment. I usually like to set in/out controls to around 50% but in this case it would mean setting the K3 Line Out to around 40 to be able to reduce the Digikeyer input by 50% So, is Line Out level 10 still the max before distortion/saturation of the output transformers occurs or is there any headroom. If 10 is still the number then fine, as the object is to provide the cleanest signal to the DigiKeyer soundcard even if the input does have to be set to max. 73 Trevor G0KTN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
> The microKeyer II, for example, has the Master control grayed > out but the left and right channels are independently adjustable. Correct, microKEYER II uses the Micronas UAC2556B codec which has independent left and right attenuators for the line input. Some operating system drivers show them as independent controls while some map them as a gain/balance pair. The Micronas also has a single channel (left channel in the USB data stream) mic input. > My digiKeyer uses the Burr-Brown PCM2902; when using Core Audio, > there is no master, left nor right controls. All DigiKeyers use the TI (Burr-Brown) PCM2902 CODEC. The TI has a single dual channel audio input. There are no electronic level controls on the input (chip design). I'm not aware of on-chip attenuators on any of the TI/BB USB products. 73, ... Joe, W4TV > -Original Message- > From: Kok Chen [mailto:c...@mac.com] > Sent: Sunday, February 01, 2009 12:40 AM > To: Elecraft Reflector > Cc: Leigh L. Klotz, Jr WA5ZNU; li...@subich.com > Subject: Re: [Elecraft] K3 LINE Out mixes KRX3 and main output? > > > > On Jan 31, 2009, at 9:16 PM, Joe Subich, W4TV wrote: > >> For the device in question, Griffin iMic, this doesn't > seem to be the > >> case. It does not separate enumerations for independently setting > >> left > >> and right input gain. It does support stereo input, just not two > >> mic/line gain controls. > > > > I don't know about the iMic - Chen would though. > > It depends on the generation of the Griffin Technology iMic. > > I have three generations of iMic, dating back from more than 5 years > ago. The are the grey disk shaped ones, not the current-generation > white ones. > > The oldest one had a 20 bit input codec, with no digital attenuator, > no left, no right, no Master. > > The next generation is also 20 bits, but it has independent left and > right attenuators (as seen from Core Audio -- I don't use > Port Audio), > but no master attenuator. > > Both of the above have 20 bit codecs in them, but uses the USB Audio > Interface class and you can only see 16 bits (they don't need > special > drivers, but you also don't see 20 bits, HI). > > After that (and I believe it is true with the white bodied > ones) they > went to a 16 bit codec. Mine (still a gray body) only has a master > level control but no individual left and right controls. > > If you are using Mac OS X, the easiest thing is to launch the Audio > MIDI Setup utility that is in /Applications/Utilities. Audio MIDI > Setup also uses Core Audio. There are three slider associated with > each sound card's "volume," a Master slider, and channels 1 > (left) and > 2 (right). If a control is not available, it will be grayed out. > > The microKeyer II, for example, has the Master control grayed > out but > the left and right channels are independently adjustable. My > digiKeyer uses the Burr-Brown PCM2902; when using Core Audio, > there is > no master, left nor right controls. > > 73 > Chen, W7AY > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
On Jan 31, 2009, at 9:16 PM, Joe Subich, W4TV wrote: >> For the device in question, Griffin iMic, this doesn't seem to be the >> case. It does not separate enumerations for independently setting >> left >> and right input gain. It does support stereo input, just not two >> mic/line gain controls. > > I don't know about the iMic - Chen would though. It depends on the generation of the Griffin Technology iMic. I have three generations of iMic, dating back from more than 5 years ago. The are the grey disk shaped ones, not the current-generation white ones. The oldest one had a 20 bit input codec, with no digital attenuator, no left, no right, no Master. The next generation is also 20 bits, but it has independent left and right attenuators (as seen from Core Audio -- I don't use Port Audio), but no master attenuator. Both of the above have 20 bit codecs in them, but uses the USB Audio Interface class and you can only see 16 bits (they don't need special drivers, but you also don't see 20 bits, HI). After that (and I believe it is true with the white bodied ones) they went to a 16 bit codec. Mine (still a gray body) only has a master level control but no individual left and right controls. If you are using Mac OS X, the easiest thing is to launch the Audio MIDI Setup utility that is in /Applications/Utilities. Audio MIDI Setup also uses Core Audio. There are three slider associated with each sound card's "volume," a Master slider, and channels 1 (left) and 2 (right). If a control is not available, it will be grayed out. The microKeyer II, for example, has the Master control grayed out but the left and right channels are independently adjustable. My digiKeyer uses the Burr-Brown PCM2902; when using Core Audio, there is no master, left nor right controls. 73 Chen, W7AY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
> For the device in question, Griffin iMic, this doesn't seem to be the > case. It does not separate enumerations for independently setting left > and right input gain. It does support stereo input, just not two > mic/line gain controls. I don't know about the iMic - Chen would though. We've been using TI and Micronas USB sound devices that are directly supported by the native "Windows Audio." The TI devices do not have an input mixer - sounds a lot like the iMic - but they still provide two channels of receive audio and an application can hook either channel or force the driver into mixed mono. I've used both the TI and Micronas based devices in stereo (separate left/right) for dual receive or right only (sub RX only) with MMTY, MMVARI, and MixW. Unfortunately, I see the issue with FLdigi ... it uses mixed mono with either the TI or Micronas CODECs. I can handle that by turning down the input level to the CODECS (manual gain controls) but that still does not permit dual receive. Interestingly, DM780 handles both the TS and Micronas in left channel (Main RX) only. 73, ... Joe, W4TV > -Original Message- > From: Leigh L. Klotz, Jr WA5ZNU [mailto:le...@wa5znu.org] > Sent: Saturday, January 31, 2009 7:51 PM > To: li...@subich.com > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 LINE Out mixes KRX3 and main output? > > > Joe Subich, W4TV wrote: > >> It doubles the data transfer to capture both sound channels > >> and discard one. > >> > > > > Why would you bother to capture both? Your software should > > be able to select left, right or mixed input from the soundcard. > > > > Hmmm...I'm looking at the multi-platform PortAudio v19 API here: > http://www.portaudio.com/docs/v19-doxydocs/structPaStreamParam eters.html Currently, we're using PaStreamParameters::channelCount=1, which doesn't offer the opportunity to specify a left or right. With channelCount=2, we could of course get two channels and discard one, as I mentioned. PulseAudio, which is Linux only, doesn't seem to support it either, but I believe ALSA and OSS do. So, if we use a Linux only solution it's possible to specify single-channel capture without discarding one channel, but for the cross-platform APIs, it doesn't seem possible. I know you know more about sound device manufacture than I do, so maybe you can point us at something we've overlooked in PortAudio, so at least we could get portable sound capture support for single-channel input. > Even relatively basic USB sound codecs provide control over the > input configuration. > For the device in question, Griffin iMic, this doesn't seem to be the case. It does not separate enumerations for independently setting left and right input gain. It does support stereo input, just not two mic/line gain controls. This seems to be the case on Linux (see http://seehuhn.de/pages/imic ) as well as Vista. On Vista, it's even worse, and won't capture in stereo at all. Leigh/WA5ZNU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
Joe Subich, W4TV wrote: >> It doubles the data transfer to capture both sound channels >> and discard one. >> > > Why would you bother to capture both? Your software should > be able to select left, right or mixed input from the soundcard. > Hmmm...I'm looking at the multi-platform PortAudio v19 API here: http://www.portaudio.com/docs/v19-doxydocs/structPaStreamParameters.html Currently, we're using PaStreamParameters::channelCount=1, which doesn't offer the opportunity to specify a left or right. With channelCount=2, we could of course get two channels and discard one, as I mentioned. PulseAudio, which is Linux only, doesn't seem to support it either, but I believe ALSA and OSS do. So, if we use a Linux only solution it's possible to specify single-channel capture without discarding one channel, but for the cross-platform APIs, it doesn't seem possible. I know you know more about sound device manufacture than I do, so maybe you can point us at something we've overlooked in PortAudio, so at least we could get portable sound capture support for single-channel input. > Even relatively basic USB sound codecs provide control over the > input configuration. > For the device in question, Griffin iMic, this doesn't seem to be the case. It does not separate enumerations for independently setting left and right input gain. It does support stereo input, just not two mic/line gain controls. This seems to be the case on Linux (see http://seehuhn.de/pages/imic ) as well as Vista. On Vista, it's even worse, and won't capture in stereo at all. Leigh/WA5ZNU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
> It doubles the data transfer to capture both sound channels > and discard one. Why would you bother to capture both? Your software should be able to select left, right or mixed input from the soundcard. Even relatively basic USB sound codecs provide control over the input configuration. 73, ... Joe, W4TV > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Leigh > L. Klotz, Jr WA5ZNU > Sent: Saturday, January 31, 2009 1:24 AM > To: a...@cablespeed.com > Cc: Elecraft Reflector > Subject: Re: [Elecraft] K3 LINE Out mixes KRX3 and main output? > > > Yes, so my request would be to be able to mute one of them. > Using a cable to connect only left is the best solution if > the rig can't > mute one. > It doubles the data transfer to capture both sound channels > and discard one. I agree though it's not that high priority. > Leigh/WA5ZNU > > When the SUB is turned on the Line Out audio is Main=left and > > Sub=Right. > > > > - > > 73, > > Greg - AB7R > > Whidbey Island WA > > NA-065 > > > > > > On Fri Jan 30 11:12 , Iain MacDonnell - N6ML sent: > > > > > >> Leigh L. Klotz, Jr WA5ZNU wrote: > >> > >>> Is it possible to control whether the sub rx goes to the > line out or > >>> not? It seems that both main and sub rx are always going to line > >>> out; I guess they're on left/right channels? If not, I > guess I need > >>> to make a cable to cut out one channel so I don't see > both with my > >>> mono sound card line input. > >>> > >> That doesn't quite make sense. If your line-in is really mono, the > >> right channel would not be connected to anything. Are you > sure it's > >> not the software you're using that's mixing the two > channels together > >> ? > >> > >> Also check your audio recording volume control settings (assuming > >> this is on Windoze) - maybe you're recording the "Mono > Mix" instead > >> of "Line In" ? > >> > >> ~Iain > >> ___ > >> Elecraft mailing list > >> Post to: Elecraft@mailman.qth.net > >> You must be a subscriber to post to the list. > >> Subscriber Info (Addr. Change, sub, unsub etc.): > >> http://mailman.qth.net/mailman/listinfo/elecraft > >> > >> Help: http://mailman.qth.net/subscribers.htm > >> Elecraft web page: http://www.elecraft.com > >> > > > > > > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
Yes, so my request would be to be able to mute one of them. Using a cable to connect only left is the best solution if the rig can't mute one. It doubles the data transfer to capture both sound channels and discard one. I agree though it's not that high priority. Leigh/WA5ZNU > When the SUB is turned on the Line Out audio is Main=left and Sub=Right. > > - > 73, > Greg - AB7R > Whidbey Island WA > NA-065 > > > On Fri Jan 30 11:12 , Iain MacDonnell - N6ML sent: > > >> Leigh L. Klotz, Jr WA5ZNU wrote: >> >>> Is it possible to control whether the sub rx goes to the line out or not? >>> It seems that both main and sub rx are always going to line out; I guess >>> they're on left/right channels? >>> If not, I guess I need to make a cable to cut out one channel so I don't >>> see both with my mono sound card line input. >>> >> That doesn't quite make sense. If your line-in is really mono, the right >> channel would not be connected to anything. Are you sure it's not the >> software you're using that's mixing the two channels together ? >> >> Also check your audio recording volume control settings (assuming this >> is on Windoze) - maybe you're recording the "Mono Mix" instead of >> "Line In" ? >> >> ~Iain >> ___ >> Elecraft mailing list >> Post to: Elecraft@mailman.qth.net >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> > > > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
I took a quick look at it and I think I need to capture 2x the data and discard half of it in order to get just one channel out of the sound device. So I think fixing it in hardware makes more sense... Leigh/WA5ZNU > I think the right place to fix it would be in whatever software is > using the captured audio - the driver is OK, but the software needs to > let you select channels you want. > > In lieu of that, an adapter cable makes sense... > > ~Iain > > > > Leigh L. Klotz, Jr WA5ZNU wrote: > >> Sorry for the confusion on the sound card side: It's a stereo input, >> but I don't get software control of the balance or independent gain. >> It's not on Windows. The Griffin iMic device specs say stereo, but the >> driver appears to be supporting only mono gain controls. >> >> If I go to LIN OUT menu and tapping button 1 to get =PHONES then I can >> use the audio gain controls to control the mix, but if I use NOR mode >> LIN OUT then it's always mixed. Probably easiest for me to make a cable >> than (a) fix the driver or (b) ask for firmware changes. >> >> Leigh/WA5ZNU >> >>> Leigh L. Klotz, Jr WA5ZNU wrote: >>> >>> Is it possible to control whether the sub rx goes to the line out or not? It seems that both main and sub rx are always going to line out; I guess they're on left/right channels? If not, I guess I need to make a cable to cut out one channel so I don't see both with my mono sound card line input. >>> ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
I think the right place to fix it would be in whatever software is using the captured audio - the driver is OK, but the software needs to let you select channels you want. In lieu of that, an adapter cable makes sense... ~Iain Leigh L. Klotz, Jr WA5ZNU wrote: > Sorry for the confusion on the sound card side: It's a stereo input, > but I don't get software control of the balance or independent gain. > It's not on Windows. The Griffin iMic device specs say stereo, but the > driver appears to be supporting only mono gain controls. > > If I go to LIN OUT menu and tapping button 1 to get =PHONES then I can > use the audio gain controls to control the mix, but if I use NOR mode > LIN OUT then it's always mixed. Probably easiest for me to make a cable > than (a) fix the driver or (b) ask for firmware changes. > > Leigh/WA5ZNU >> Leigh L. Klotz, Jr WA5ZNU wrote: >> >>> Is it possible to control whether the sub rx goes to the line out or >>> not? >>> It seems that both main and sub rx are always going to line out; I >>> guess they're on left/right channels? >>> If not, I guess I need to make a cable to cut out one channel so I >>> don't see both with my mono sound card line input. >>> >> >> That doesn't quite make sense. If your line-in is really mono, the right >> channel would not be connected to anything. Are you sure it's not the >> software you're using that's mixing the two channels together ? >> >> Also check your audio recording volume control settings (assuming this >> is on Windoze) - maybe you're recording the "Mono Mix" instead of >> "Line In" ? >> >> ~Iain >> ___ >> Elecraft mailing list >> Post to: Elecraft@mailman.qth.net >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
When the SUB is turned on the Line Out audio is Main=left and Sub=Right. - 73, Greg - AB7R Whidbey Island WA NA-065 On Fri Jan 30 11:12 , Iain MacDonnell - N6ML sent: > > >Leigh L. Klotz, Jr WA5ZNU wrote: >> Is it possible to control whether the sub rx goes to the line out or not? >> It seems that both main and sub rx are always going to line out; I guess >> they're on left/right channels? >> If not, I guess I need to make a cable to cut out one channel so I don't >> see both with my mono sound card line input. > >That doesn't quite make sense. If your line-in is really mono, the right >channel would not be connected to anything. Are you sure it's not the >software you're using that's mixing the two channels together ? > >Also check your audio recording volume control settings (assuming this >is on Windoze) - maybe you're recording the "Mono Mix" instead of >"Line In" ? > > ~Iain >___ >Elecraft mailing list >Post to: Elecraft@mailman.qth.net >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
Sorry for the confusion on the sound card side: It's a stereo input, but I don't get software control of the balance or independent gain. It's not on Windows. The Griffin iMic device specs say stereo, but the driver appears to be supporting only mono gain controls. If I go to LIN OUT menu and tapping button 1 to get =PHONES then I can use the audio gain controls to control the mix, but if I use NOR mode LIN OUT then it's always mixed. Probably easiest for me to make a cable than (a) fix the driver or (b) ask for firmware changes. Leigh/WA5ZNU > Leigh L. Klotz, Jr WA5ZNU wrote: > >> Is it possible to control whether the sub rx goes to the line out or not? >> It seems that both main and sub rx are always going to line out; I guess >> they're on left/right channels? >> If not, I guess I need to make a cable to cut out one channel so I don't >> see both with my mono sound card line input. >> > > That doesn't quite make sense. If your line-in is really mono, the right > channel would not be connected to anything. Are you sure it's not the > software you're using that's mixing the two channels together ? > > Also check your audio recording volume control settings (assuming this > is on Windoze) - maybe you're recording the "Mono Mix" instead of > "Line In" ? > > ~Iain > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
Leigh L. Klotz, Jr WA5ZNU wrote: > Is it possible to control whether the sub rx goes to the line out or not? > It seems that both main and sub rx are always going to line out; I guess > they're on left/right channels? > If not, I guess I need to make a cable to cut out one channel so I don't > see both with my mono sound card line input. That doesn't quite make sense. If your line-in is really mono, the right channel would not be connected to anything. Are you sure it's not the software you're using that's mixing the two channels together ? Also check your audio recording volume control settings (assuming this is on Windoze) - maybe you're recording the "Mono Mix" instead of "Line In" ? ~Iain ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 LINE Out mixes KRX3 and main output?
Is it possible to control whether the sub rx goes to the line out or not? It seems that both main and sub rx are always going to line out; I guess they're on left/right channels? If not, I guess I need to make a cable to cut out one channel so I don't see both with my mono sound card line input. Leigh/WA5ZNU K3#51, K2#3121, KX1#712 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: Line out level in 'CONFIG:LIN OUT = PHONES' mode
Thanks Lyle. Looking forward to it ! -- Enno, PF5X Lyle Johnson wrote: > >> I am experimenting with recording QSOs. If I want to record my own >> transmission too, I have to set CONFIG: LIN OUT =PHONES... > > A means to get tx audio without having to be in =PHONES is on the list. > > 73, > > Lyle KK7P > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/K3%3A-Line-out-level-in-%27CONFIG%3ALIN-OUT-%3D-PHONES%27-mode-tp1451780p1454195.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: Line out level in 'CONFIG:LIN OUT = PHONES' mode
I am experimenting with recording QSOs. If I want to record my own transmission too, I have to set CONFIG: LIN OUT =PHONES... A means to get tx audio without having to be in =PHONES is on the list. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3: Line out level in 'CONFIG:LIN OUT = PHONES' mode
Hi all, I am experimenting with recording QSOs. If I want to record my own transmission too, I have to set CONFIG: LIN OUT =PHONES. This links the line out level to the AF pot meter settings. However, the level is too low for a decent recording unless I want to blow my eardrums. When in LIN OUT = NOR mode I can set the level to 15 and I get a reasonable line out level ... Any ideas or any plans to include a "gain factor" between AF setting and line out level when in = PHONES mode ?? -- Enno, PF5X -- View this message in context: http://n2.nabble.com/K3%3A-Line-out-level-in-%27CONFIG%3ALIN-OUT-%3D-PHONES%27-mode-tp1451780p1451780.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com