Re: [AFMUG] OT: firewall maintenance

Are you saying what I think you're saying here? If so, that really sucks. On Jun 12, 2017 6:23 PM, "Steve Jones" wrote: > kernel panic > > On Tue, Jun 6, 2017 at 7:39 PM, Steve Jones > wrote: > >> apparently, God had other plans >> >> On

Re: [AFMUG] new Cambium 450 CPE's

Is it cheaper than a 450 SM + 27RD? On Wed, Jun 14, 2017 at 6:37 PM, Gino A. Villarini wrote: > Easier to assemble, looks way better (professional) 40 mbps key included, > less pieces to stock > > From: Af on behalf of Bill Prince < >

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

A basic would work, along with about anything other than an aux or timing port version On Jun 15, 2017 11:01 AM, "Paul McCall" wrote: > We had moved away from SyncPipes for the most part, bought the SPJ Basics > instead of pipes the past few times we needed that. > > > >

Re: [AFMUG] laser based coms

I did free space lasers between sky scrapers in Mexico City in 1990. Buildings more a whole bunch more than you think they do. Products have been out there for years. The TV network used them for the Spain Olympics in 1992. Not sure if any of these systems are in the visible range. They were

Re: [AFMUG] laser based coms

You still have some of the old players but it’s still a very short range technology. It just costs a boatload of money to keep the beams aligned the farther out you go. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jaime Solorza Sent: Thursday, June 15, 2017 9:07 AM To: Animal Farm

Re: [AFMUG] laser based coms

IR as well, sorry my bad On 06/15/2017 09:18 AM, Chuck McCown wrote: I did free space lasers between sky scrapers in Mexico City in 1990. Buildings more a whole bunch more than you think they do. Products have been out there for years. The TV network used them for the Spain Olympics in 1992.

Re: [AFMUG] laser based coms

We did LACE install for Johnson and Johnson in 90s ... blazing 100MBps ... across in Cd. Juarez..two blocks.. Jaime Solorza On Jun 15, 2017 10:18 AM, "Chuck McCown" wrote: > I did free space lasers between sky scrapers in Mexico City in 1990. > Buildings more a whole bunch

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

How would a SBJ Basic work? It only has a RJ45 connector…. With no timing ports, it can’t feed anything. Thought it was just a Sync Pipe basic replacement ? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Forrest Christian (List Account) Sent: Thursday, June 15, 2017 12:12 PM To: af

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

The rj45 has the equivalent of a timing port on pins 123 and 6. I don't have access to the full pinout but I'll see if I can pull it up when I get to more Internet On Jun 15, 2017 11:27 AM, "Paul McCall" wrote: > How would a SBJ Basic work? It only has a RJ45 connector….

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

Which syncbox? On Jun 15, 2017 8:51 AM, "Paul McCall" wrote: > Guys, > > > > We need to providing timing on a single FSK AP and it is fed up the tower > through fiber to a UBNT S16. (so its powering off the S16). I want to use > one timing port to output timing to the FSK

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

What type of fsk radio do you gave that doesn't do ups power? On Jun 15, 2017 9:04 AM, "Paul McCall" wrote: > Syncbox Junior Timing Port Version > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Forrest Christian > (List Account) > *Sent:* Thursday, June 15, 2017

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

There is no RJ45 input on the SBJTP version. We power lots of other RJ45 devices of the S16 with special cables. This is a different animal From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Baird Sent: Thursday, June 15, 2017 10:21 AM To: af@afmug.com Subject: Re: [AFMUG] Powering a

Re: [AFMUG] OT: firewall maintenance

So sorry to hear that, best wishes from The Deep South. On 6/15/2017 9:28 AM, Steve Jones wrote: Yeah, found out last week at ultrasound, in ER since like 3 this morning cause it went south, its a rough deal for her. Sorry, no good analogy today On Jun 15, 2017 4:28 AM, "Forrest Christian

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

One FSK AP? Just put a Parasitic pipe on it. The 4-port SBJ aux & timing port versions are basically identical. Aux = RJ45. Timing port = RJ12. Obviously requires UGPS power capable radios. You can always do a regular SBJ deluxe which has a dedicated SyncInjector/power port. If it was me,

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

Syncbox Junior Timing Port Version From: Af [mailto:af-boun...@afmug.com] On Behalf Of Forrest Christian (List Account) Sent: Thursday, June 15, 2017 10:03 AM To: af Subject: Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device Which syncbox? On Jun 15, 2017 8:51 AM,

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

H….. let me try again. I have a single FSK AP that is getting powered/ethernet successfully connected to a UBNT S16. I need to get sync to that radio. I want to power the SB Junior Timing Port Version by making a cable that I can connect to the S16 that will connect to one of the SBJTP

[AFMUG] Powering a Syncbox Junior without a uGPS type device

Guys, We need to providing timing on a single FSK AP and it is fed up the tower through fiber to a UBNT S16. (so its powering off the S16). I want to use one timing port to output timing to the FSK (as normal) and one port to receive power from the S16 and need to figure out the pinout

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

If I understand your question.. just use the Canopy PoE pinout. We power SyncBox's from Netonix using this scheme. On Thu, Jun 15, 2017 at 10:19 AM, Paul McCall wrote: > H….. let me try again. > > > > I have a single FSK AP that is getting powered/ethernet successfully >

Re: [AFMUG] OT: firewall maintenance

Yeah, found out last week at ultrasound, in ER since like 3 this morning cause it went south, its a rough deal for her. Sorry, no good analogy today On Jun 15, 2017 4:28 AM, "Forrest Christian (List Account)" < li...@packetflux.com> wrote: > Are you saying what I think you're saying here? > > If

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

AFAIK All semi-modern fsk radios provide uGPS power. Just connect the radio and box together and turn on uGPS power in the radio. Use whatever cable cambium recommends for a uGPS probably just a 6p6c straight through cable, although it might make sense to skip the factory reset pin. On Jun

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

I don't have a single P10 or P11 FSK AP that has UGPS power control on the config page. Perhaps it's just always on? On 6/15/2017 9:35 AM, Forrest Christian (List Account) wrote: AFAIK All semi-modern fsk radios provide uGPS power. Just connect the radio and box together and turn on uGPS

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

That’s what it appears. Am wondering if Forrest has a different voltage range for input since he built it himself Paul From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup Sent: Thursday, June 15, 2017 11:29 AM To: af@afmug.com Subject: Re: [AFMUG] Powering a Syncbox Junior

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

What else you got laying around? Deluxe pipe? Rev F/G/H will work fine with 12-56VDC. On 6/15/2017 10:34 AM, Paul McCall wrote: That’s what it appears. Am wondering if Forrest has a different voltage range for input since he built it himself Paul *From:*Af [mailto:af-boun...@afmug.com]

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

Nope, that's all you need. No, they don't have any built in GPS, but you don't really need it if you're just doing one link and it doesn't need to sync with anything else. If you do need sync, then you'd need to get some type of GPS for the Master radio... they support both sync over power and

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

We had moved away from SyncPipes for the most part, bought the SPJ Basics instead of pipes the past few times we needed that. From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup Sent: Thursday, June 15, 2017 11:37 AM To: af@afmug.com Subject: Re: [AFMUG] Powering a Syncbox Junior

[AFMUG] laser based coms

A friend is doing research into laser based space and atmosphere laser coms and pinged me as to who is producing product in the visible wavelengths these days. They already have contacts at NASA and FB on work being done there and I though I would ask AFMUG as to info that people have about

Re: [AFMUG] laser based coms

Lawrence Livermore (spelling?) Is one where an engineer friend of mine works...near SF , California Jaime Solorza On Jun 15, 2017 10:03 AM, "Robert Andrews" wrote: A friend is doing research into laser based space and atmosphere laser coms and pinged me as to who is

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

We scoured the vans and found a Parasitic to use, so its less of an emergency From: Af [mailto:af-boun...@afmug.com] On Behalf Of Forrest Christian (List Account) Sent: Thursday, June 15, 2017 12:34 PM To: af Subject: Re: [AFMUG] Powering a Syncbox Junior without a uGPS type

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

Not so... the 900mhz variety is 450i, and they do support sync over power (according to Cambium... I haven't actually tried it). On Thu, Jun 15, 2017 at 12:34 PM, George Skorup wrote: > The PTP450 is just SM hardware (900 included). Sync over power is not on > the

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

The PTP450 is just SM hardware (900 included). Sync over power is not on the board. Timing port only. On 6/15/2017 10:48 AM, Mathew Howard wrote: Nope, that's all you need. No, they don't have any built in GPS, but you don't really need it if you're just doing one link and it doesn't need to

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

I've tried it a couple times and it never really works quite right (even with 1 AP and 1 PTP link) Personally I'd try another band but it sounds like a possible NLOS for both PTP and PMP in the original post. On Thu, Jun 15, 2017 at 12:23 PM Mathew Howard wrote: > Well,

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

Also it's usually pretty hard to sync a PTP with PMP in the same band. It can be done but you have to make a lot of concessions to both systems and if one reboots everything is outa sync for a bit. 2 cents On Thu, Jun 15, 2017 at 11:34 AM George Skorup wrote: > The

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

There are issues getting PTP and PMP to sync with eachother... something to do with the differences in how they handle the distance settings, if I remember correctly. On Thu, Jun 15, 2017 at 12:48 PM, Josh Luthman wrote: > You just put them on the same timing system

[AFMUG] PMP450 SM ethernet jack

Anyone know the Digikey etc. part number for the ethernet jack on a standard 5.7 PMP450 SM?

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

The particular link I'm looking to replace is relatively short (0.46 miles) through tons of trees. It is running right now with ePMP 2.4 GHz radios with a Force 200 on one end and a 24 dBi Rocket Dish on the other. Channel size is 5 MHz and signal floats around -80 dBm. I am entertaining the 900

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

There is no way to set "max miles" on the PTP system. So hopefully you can set the AP to the mileage of the PTP link. Otherwise your only left with downlink % and control slots to make the timing match. It can be done but it's hard and you make a lot of concessions (mostly on the PMP system) to

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

Well, that's probably not too terrible if you're only dealing with one AP and one PTP link... unless the distance of the PTP link is too shorter than some of the PMP links. On Thu, Jun 15, 2017 at 1:10 PM, Sean Heskett wrote: > There is no way to set "max miles" on the PTP

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

You just put them on the same timing system and then do 75/25 split for everything. Wouldn't be that crazy. IMO sync for ptp is kind of dumb, though - I'd prefer flexible ratios and lower latency. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373

[AFMUG] Netonix/Mimosa compatibility.

Has anyone experience a compatibility problem when using Mimosa radios with Netonix for power? We've got a problem with gigabit link negotiation issues where link will alternate between a gig and no link. We've upgraded to Cat 6 and are still seeing the issue.

Re: [AFMUG] stock of mccown tech gigess-hv surge protectors?

Found them... 5th vendor I tried. On Thu, Jun 15, 2017 at 2:35 PM, Eric Kuhnke wrote: > I need to buy eight units today, my usual source is failing me... Anyone > know who might have them in stock? >

Re: [AFMUG] Netonix/Mimosa compatibility.

Does this tower have an FM radio station located on it?? -sean On Thu, Jun 15, 2017 at 4:58 PM Jay Weekley wrote: > At the moment it's two Mimosa radios at one tower and one radio at > another that have the issue. We replaced our Shireen Cat 5 with Shireen > Cat 6

Re: [AFMUG] Netonix/Mimosa compatibility.

One is 127 feet another is 167 feet and the third is 206 feet. Sean Heskett wrote: how long is the cat6 cable run? -sean On Thu, Jun 15, 2017 at 5:33 PM, Jay Weekley > wrote: Too my knowledge there is no wireless other than

Re: [AFMUG] PacketFlux shunts

Assuming they were EXACTLY the same resistance. Otherwise there will be an uneven division of currents. I prefer to use #10 wire. 1 foot is .001 ohms. Make your own shunt. Assuming 20 mV full scale is enough. 20 gauge (which is hard to find) is close to .01 ohms per foot. However that

Re: [AFMUG] Netonix/Mimosa compatibility.

Also, the Netonix cable diagnostics will show the cable as being good on one test and then detect an abnormal termination on pair 7 and 8 then 5,6,7 and 8 and then good again. Jay Weekley wrote: Has anyone experience a compatibility problem when using Mimosa radios with Netonix for power?

[AFMUG] Conduit Supplier

Anyone have a recommendation for a HDPE conduit supplier in the Illinois​ area? Freight is an issue.

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

That sounds like a pretty good use for a 900mhz PTP link. You never quite know what 900mhz is going to do until you try it, but I'd expect it to work better than what you have now for that kind of a link. I'd just put up the PTP link without sync on it and see how it works. If it screws up the

Re: [AFMUG] PacketFlux shunts

This may be a bozo approach, but if you took two 10 amp shunts and connected them in parallel, you would get a 20 amp shunt out of the deal. bp On 6/15/2017 3:47 PM, George Skorup wrote: Forrest, Would you be willing to make a 20A shunt? Would the traces on your

Re: [AFMUG] Netonix/Mimosa compatibility.

Oh, and no surge protector at the moment. Faisal Imtiaz wrote: have not seen that issue ... Are you using 48VH port ? or just 48V ? and is there a surge protector in the middle ? Regards Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232

[AFMUG] Cambium Vulnerability Published

This just hit my mailbox. https://ics-cert.us-cert.gov/advisories/ICSA-17-166-01 Apologies if this has already been posted TT Cambium Networks ePMP | ICS-CERT ics-cert.us-cert.gov

[AFMUG] stock of mccown tech gigess-hv surge protectors?

I need to buy eight units today, my usual source is failing me... Anyone know who might have them in stock?

Re: [AFMUG] Netonix/Mimosa compatibility.

hmm.. sounds like you have some other issue going on ... Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net - Original Message - > From: "CBB - Jay Fuller"

Re: [AFMUG] OT: firewall maintenance

I'm sorry to hear that :( - Josh On Jun 15, 2017 9:28 AM, "Steve Jones" wrote: > Yeah, found out last week at ultrasound, in ER since like 3 this morning > cause it went south, its a rough deal for her. Sorry, no good analogy today > > On Jun 15, 2017 4:28 AM,

Re: [AFMUG] Netonix/Mimosa compatibility.

>. Netonix still shows cable errors though a > standard cable tester shows if you are testing the cable with the radio plugged in, then this is normal.. Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option

Re: [AFMUG] Cambium Vulnerability Published

Odd. The post says we should be running 3.4-RC7 or later, but 3.4 Final was released a few days ago, and the release notes don't seem to mention this vulnerability. I may be missing something, but the concern seems to be about the fact that the platform responds to SMNP get and set commands,

Re: [AFMUG] Netonix/Mimosa compatibility.

We tried the Mimosa brick and it didn't help but that was prior to trying Mimosa's suggestion of moving to Cat6 . We've tried locking it to 100 meg full duplex and it held a connection but I am not sure if we tried 1 gig half. Faisal Imtiaz wrote: Here is what I would suggest. 1) Use the

Re: [AFMUG] Netonix/Mimosa compatibility.

We tried it on one radio of the four in question. Faisal Imtiaz wrote: hmm.. sounds like you have some other issue going on ... Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email:

Re: [AFMUG] Netonix/Mimosa compatibility.

how long is the cat6 cable run? -sean On Thu, Jun 15, 2017 at 5:33 PM, Jay Weekley wrote: > Too my knowledge there is no wireless other than us at either location. > > Sean Heskett wrote: > >> Does this tower have an FM radio station located on it?? >> >> -sean >>

Re: [AFMUG] Netonix/Mimosa compatibility.

Here is what I would suggest. 1) Use the Mimosa Brick, for testing, and see if that fixes your issue if it does then consider, using a different port or 48VH power etc to see if the issue is on then netonix side. if you still have the same issue with Mimosa Brick then you know the problem

Re: [AFMUG] OT: firewall maintenance

My most sincere condolences. I didn't put that together. It isn't easy for anyone but it is especially hard on women. It rightfully affects them on a deeper level. What is your address? Off list if you are worried about dissolve firebombing your house. On Thu, Jun 15, 2017, 9:32 AM Jerry Head

Re: [AFMUG] Netonix/Mimosa compatibility.

Have you just plugged into a laptop or anything besides the Netonix? We've had at least one situation with a bad port on a Netonix switch that had symptoms similar to this. bp On 6/15/2017 3:44 PM, Jay Weekley wrote: We tried it on one radio of the four in

[AFMUG] PacketFlux shunts

Forrest, Would you be willing to make a 20A shunt? Would the traces on your current design handle it? Reason I'm asking is... I'm stupid. I had a 10A shunt on the batt negative side of a Traco BCMU360. Didn't occur to me that 230 watts @ ~12VDC can get up to 20A. So the shunt went kaput

Re: [AFMUG] Netonix/Mimosa compatibility.

have not seen that issue ... Are you using 48VH port ? or just 48V ? and is there a surge protector in the middle ? Regards Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

Re: [AFMUG] Netonix/Mimosa compatibility.

We have allways using 48VH (port 1-4) and have no issues at all, also as Faisal mention check surge protector (if you using) Edilberto Gotay RF Manager Tel.787.273.4143 Ext. 209 Cel.787.403.7539 Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

Re: [AFMUG] Conduit Supplier

I need one for Texas. I can find who I used to use. It head the word underground I think but can't find them now. On Thu, Jun 15, 2017, 5:09 PM Jason McKemie < j.mcke...@veloxinetbroadband.com> wrote: > Anyone have a recommendation for a HDPE conduit supplier in the Illinois​ > area? Freight is

Re: [AFMUG] Netonix/Mimosa compatibility.

At the moment it's two Mimosa radios at one tower and one radio at another that have the issue. We replaced our Shireen Cat 5 with Shireen Cat 6 and Shireen connectors and the link negotiation problem seems to have gotten better but the Netonix still shows cable errors though a standard cable

Re: [AFMUG] Netonix/Mimosa compatibility.

48V (0.75A) is how it's listed on the port tab. Faisal Imtiaz wrote: have not seen that issue ... Are you using 48VH port ? or just 48V ? and is there a surge protector in the middle ? Regards Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48

Re: [AFMUG] Netonix/Mimosa compatibility.

Too my knowledge there is no wireless other than us at either location. Sean Heskett wrote: Does this tower have an FM radio station located on it?? -sean On Thu, Jun 15, 2017 at 4:58 PM Jay Weekley > wrote: At the moment

Re: [AFMUG] Netonix/Mimosa compatibility.

hmm, one does. one does not - Original Message - From: CBB - Jay Fuller To: af@afmug.com Sent: Thursday, June 15, 2017 8:29 PM Subject: Re: [AFMUG] Netonix/Mimosa compatibility. That is not the case for our other five Mimosa radios Sent from my Verizon 4G LTE

Re: [AFMUG] Conduit Supplier

Millennium - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Jason McKemie" To: af@afmug.com Sent: Thursday, June 15, 2017 5:08:59 PM Subject: [AFMUG] Conduit

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

I agree. I went through Cambium support about it and they treated me like 'hmmm, that should work fine'. But it doesn't Jon Langeler Michwave Technologies, Inc. > On Jun 15, 2017, at 2:51 PM, Sean Heskett wrote: > > I've tried it a couple times and it never really works

Re: [AFMUG] Advantage FSK Keys

I have some keys left I think Nate if you need them. We bought them in 25 packs and have some left to sell I believe -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke Sent: Wednesday, June 14, 2017 10:07 AM To: af@afmug.com Subject: Re: [AFMUG] Advantage

Re: [AFMUG] Conduit Supplier

the list stripped my VCF attachments. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Mike Hammett" To: af@afmug.com Sent: Thursday, June 15, 2017 9:34:57 PM

Re: [AFMUG] Netonix/Mimosa compatibility.

That is not the case for our other five Mimosa radios Sent from my Verizon 4G LTE Smartphone - Reply message - From: "Faisal Imtiaz" To: Subject: [AFMUG] Netonix/Mimosa compatibility. Date: Thu, Jun 15, 2017 7:44 PM >. Netonix still shows cable

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

Hmm. ... odd. I know it's in the 450, but I thought it was in the older radios too. I'm traveling, so can't look it up, but what does the uGPS manual say about FSK radios? On Jun 15, 2017 9:42 AM, "George Skorup" wrote: > I don't have a single P10 or P11 FSK AP

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

S… can I power it off an S16 somehow, with the right cable? (24v?) Paul From: Af [mailto:af-boun...@afmug.com] On Behalf Of Forrest Christian (List Account) Sent: Thursday, June 15, 2017 11:04 AM To: af Subject: Re: [AFMUG] Powering a Syncbox Junior without a uGPS type

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

I'm about 63.48% sure that UGPS power is like 5-7VDC which is on one of the serial lines, IIRC. On 6/15/2017 10:15 AM, Paul McCall wrote: S… can I power it off an S16 somehow, with the right cable? (24v?) Paul *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Forrest Christian

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

OK found a short .pdf manual. Looks like the 100 series may not support this. The timing port model needs ugps power. On Jun 15, 2017 9:46 AM, "Forrest Christian (List Account)" < li...@packetflux.com> wrote: > Hmm. ... odd. I know it's in the 450, but I thought it was in the older > radios

[AFMUG] PTP450 900MHz Necessary Hardware?

To setup a PTP450 900 MHz link, is there anything I need other than 2x radios, 2x antennas and power to run a link? Do they come with GPS receivers like ePMP does, or do they need a separate device? Thank you - Chris

Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device

If I had a Parasitic laying around I would. And the timing port version does NOT have an RJ45, it has to run off power fed to it via a timing port (uGPS) which Forrest acknowledge now. I actually had done a straight through cable (minus reset line) just to see if an FSK would turn it on; it

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

For a PTP link? Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell jbroadw...@converge-tech.com > On Jun 15, 2017, at 11:07 AM, Christopher Gray > wrote: > > To setup a PTP450 900 MHz link, is there anything I need other than 2x >

Re: [AFMUG] PTP450 900MHz Necessary Hardware?

Yes, it is for a PTP link. Can they sync with PMP100 hardware? I have an old AP relatively nearby that will eventually be upgraded... so it is not really a necessity, but it could be useful. Do you know if it works with the PacketFlux syncpipe? I already have a couple of those. On Thu, Jun