(List
Account)
Sent: Friday, April 17, 2015 2:37 AM
To: af
Subject: Re: [AFMUG] Packetflux Gigabit SyncInjector for 24 Volt Cambium Radios
- Ubnt too?
In progress :)
I was going to hold off announcing this until we were sure it was going to
work, since the 'mechanical issues' we're
In progress :)
I was going to hold off announcing this until we were sure it was going to
work, since the 'mechanical issues' we're working through are a side effect
of this, and I'm confident but not 100% sure we're close to solving them.
But since it was brought up I'll give a bit of a
We need one product that does gig for Af5x, epmp and ubnt. That would be
glorious.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 17, 2015 3:36 AM, Forrest Christian (List Account)
li...@packetflux.com wrote:
In progress :)
I was
Tycon makes these little dongles that flip the brown/blues which should
work in the meantime. Also, I believe the Netonix switches can do all
three of those at GigE (where oh where is the DC version).
Josh
On Fri, Apr 17, 2015 at 10:37 AM, Josh Luthman j...@imaginenetworksllc.com
wrote:
We
Why not make the jumper changeable in a web UI? then you don't have to worry
about a new plastic mold for the case?
—
Sent from Mailbox
On Fri, Apr 17, 2015 at 3:36 AM, Forrest Christian (List Account)
li...@packetflux.com wrote:
In progress :)
I was going to hold off announcing
So two products do 2/3 of those products. Augh!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Apr 17, 2015 at 1:55 PM, Forrest Christian (List Account)
li...@packetflux.com wrote:
The gigabit poe injectors do this, but without sync.
It's pretty simple why this isn't in the cards. Today there's a single
switching element per port. To make this switchable there would need to
be eight per port.. One for positive and one for negative for each pair.
Each switching element adds about two dollars to the cost of the product
when
The gigabit poe injectors do this, but without sync. And with some fusing
and wiring issues. This would add the sync and clean up wiring.
On Apr 17, 2015 8:37 AM, Josh Luthman j...@imaginenetworksllc.com wrote:
We need one product that does gig for Af5x, epmp and ubnt. That would be
Not if you use the external GPS pucks for ePMP. You are still out luck for
PMP100, though.
On Fri, Apr 17, 2015 at 2:19 PM, Forrest Christian (List Account)
li...@packetflux.com wrote:
Pretty much. The whole sync thing is the problem.
On Apr 17, 2015 12:13 PM, Josh Luthman
But the gig/sync works on ePMP and not af5x because of the power pinout I
thought?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Apr 17, 2015 at 2:19 PM, Forrest Christian (List Account)
li...@packetflux.com wrote:
Pretty much. The
I wouldn't care if a cover had to be taken off to adjust jumper positions.
On 4/17/2015 12:55 PM, Forrest Christian (List Account) wrote:
The gigabit poe injectors do this, but without sync. And with some
fusing and wiring issues. This would add the sync and clean up wiring.
On Apr 17,
I would pay extra to avoid it.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 17, 2015 6:37 PM, George Skorup (Cyber Broadcasting)
geo...@cbcast.com wrote:
I wouldn't care if a cover had to be taken off to adjust jumper positions.
On
Has anyone tried these syncinjectors for Ubnt Airmax radios? What about
anything else? I'd love to use this one product for all sites from now on.
Is it possible to run the AF5x?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
AFAIK, the 450AP GigE interface is still powered only on pins 4, 5, 7
8. Probably applies to the ePMP Sync radio too.
So, with that in mind.. does the UBNT GigE PoE stuff use all 4 pairs for
power? If it's 4, 5, 7 8, it may be possible, but... you'd have to
flip the blues and browns at one
Yup screwed there :(
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 16, 2015 7:42 PM, Mathew Howard mhoward...@gmail.com wrote:
If I remember right, the AF5x pinout is 1/2 4/5 positive and 3/6 7/8
negative.
Airmax stuff is all 4/5
I saw that too =P
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 16, 2015 at 6:30 PM, George Skorup (Cyber Broadcasting)
geo...@cbcast.com wrote:
You said maxipad.
On 4/16/2015 5:25 PM, Mark Radabaugh wrote:
Sorry - read that
No pinout!?
On 4/16/2015 6:10 PM, Josh Luthman wrote:
It says 24v/1a and is gigabit. It is a bit different than the
Nanobeam POEs. It also doesn't work with an NSM5 for certain.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 16,
Sorry - read that wrong. The gigabit power injector works fine, I don't know
about the syncinjector.
Bah... Loconanogigasyncinjecotorairmaxipad.
Mark Radabaugh
Amplex
27800 Lemoyne, Ste F
Millbury, OH 43447
419-261-5996
On Apr 16, 2015, at 5:55 PM, Josh Luthman j...@imaginenetworksllc.com
Works fine for the air fiber 24hd.
Mark Radabaugh
Amplex
27800 Lemoyne, Ste F
Millbury, OH 43447
419-261-5996
On Apr 16, 2015, at 5:55 PM, Josh Luthman j...@imaginenetworksllc.com wrote:
Has anyone tried these syncinjectors for Ubnt Airmax radios? What about
anything else? I'd love to
Isn't that Apple's next product?
http://money.cnn.com/2015/03/05/technology/12-9-inch-ipad/
Mark
On Apr 16, 2015, at 6:30 PM, George Skorup (Cyber Broadcasting)
geo...@cbcast.com wrote:
You said maxipad.
On 4/16/2015 5:25 PM, Mark Radabaugh wrote:
Sorry - read that wrong. The gigabit
The gigabit UBNT stuff (excluding AF5x and AF) has to have ground on pins 3
6 to connect at a gig.
On Thu, Apr 16, 2015 at 6:02 PM, Mathew Howard mhoward...@gmail.com wrote:
So what we need is a Syncinjector with jumpers like on the Gigabit PoE
injectors...
On Thu, Apr 16, 2015 at 6:57 PM,
What does the AF5x power supply say on the label for pairs or pinouts?
Or is it the same as their other 24V/1A supplies, but gigabit?
On 4/16/2015 5:29 PM, Josh Luthman wrote:
I'm mostly concerned with the Ubnt Airmax stuff (24v) and AF5x.
Obviously the ePMP works.
Josh Luthman
Office:
It says 24v/1a and is gigabit. It is a bit different than the Nanobeam
POEs. It also doesn't work with an NSM5 for certain.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 16, 2015 at 6:39 PM, George Skorup (Cyber Broadcasting)
If I remember right, the AF5x pinout is 1/2 4/5 positive and 3/6 7/8
negative.
Airmax stuff is all 4/5 positive and 7/8 negative, I imagine the 10/100
stuff would work fine with the power pairs swapped, but I don't know what
that would do to gigabit. I don't think it's going to work with AF5x,
So what we need is a Syncinjector with jumpers like on the Gigabit PoE
injectors...
On Thu, Apr 16, 2015 at 6:57 PM, Josh Luthman j...@imaginenetworksllc.com
wrote:
Yup screwed there :(
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr
I'm mostly concerned with the Ubnt Airmax stuff (24v) and AF5x. Obviously
the ePMP works.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 16, 2015 at 6:12 PM, George Skorup (Cyber Broadcasting)
geo...@cbcast.com wrote:
AFAIK, the
You said maxipad.
On 4/16/2015 5:25 PM, Mark Radabaugh wrote:
Sorry - read that wrong. The gigabit power injector works fine, I don't know
about the syncinjector.
Bah... Loconanogigasyncinjecotorairmaxipad.
Mark Radabaugh
Amplex
27800 Lemoyne, Ste F
Millbury, OH 43447
419-261-5996
On
27 matches
Mail list logo
