As noted by Ken, you typically set the timezone during the installation
process. If you need to adjust the timezone post-install then you can do so
from the cli:
admin:set timezone ?
Syntax:
set timezone zone
zone mandatory This is the new time zone. Enter the appropriate string
Ricardo,
If I follow your question, I believe this is normal. DNA won't resolve Standard
Local Route Group to the actual route group assigned to the device's DP. At
least in version 7.x. In CUCM 8.5, it does resolve the actual route group name.
Regards,
Bill
On Feb 6, 2012, at 7:05 PM, Ricardo
Ricardo,
IIRC, the stop routing on unallocated number flag was actually first
introduced for ICT call flows. However, it can be applied to other call flows.
In normal call handling, when the CUCM receives a notification that a call
failed to complete due to unallocated number it will stop
in a lab scenario).
One reason is that if you are running a 2-node UCM cluster then replication
transactions could be happening and vmware recommends that for clustered apps,
you should take the snapshot offline, if possible.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
connecting to a session but couldn't.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jul 23, 2012, at 9:52 AM, Nicolas MICHEL wrote:
Hey guys,
Just jumping into the CCIE Voice playground even if I was in Vik's bootcamp
4 weeks ago (highly recommended by the way, I
vouchers. If you
are unsure of whether you have vouchers or not, work with your IPexpert sales
person.
Regards,
Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jul 23, 2012, at 4:05 PM, Kadambari Shrinivas wrote:
Hello,
I am new to the group and recently purchased ip
available) is a more accurate
state and that is probably why I use this method. I just wanted to check with
others to see if there is some consideration I am not accounting for.
Thanks in advance.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
speed as it is about knowledge. So, picking configuration
methods/habits that help improve efficiency *and* maintain flexibility to
support different lab scenarios is a good thing.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 2, 2012, at 11:17 AM
Eliot is correct. After you install the servers you can drop them back to 1GB
RAM. At the scale we are dealing with in the lab, that shouldn't be a problem.
I have a UCS C200 M1 and I am able to run all 5 IE lab VMs along with other VMs
without issue.
-Bill
--
William Bell
blog: http
, it has been quick and
painless.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 8, 2012, at 2:53 AM, nehal ahmed wrote:
Hi All,
I have been looking for an efficient way of doing CUCM, UNITY etc Backup
Restore to progress with the Lab Practice.
Right now
According to the 5x SRND (which should apply to 7x, too) the UCCX software does
not mark packets with DSCP values. This information is provided in Chapter 7 /
page 7-13. Relevant/recommended values are provided in Table 7-10.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter
-on-hold.au
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 11, 2012, at 11:55 PM, Krishna wrote:
hi folks,
i ran into a new issue with the bacd.. but with your help i could able to get
the welcome prompt and i understand the bacd structure... here is my bacd
and what benefits
it is actually provided above/beyond Workbook 2?
I am looking for consumer feedback.
Thanks,
Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
___
For more information regarding industry leading CCIE Lab
will also want a new VM profile just for the transfer. You
want to avoid sending the asterisk (or whatever prefix/feature code you
chose) in the call setup to VM. To clarify, on the VM profile add a mask.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 20
Woops. That would be 0 points! Thanks for the correction.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 20, 2012, at 5:12 PM, Dan Quinlan (daquinla) wrote:
One correction: step 4 should say *5002.
DQ
d...@cisco.com
Sent from my iPhone
On Aug 20
Yes, they refer to the same feature.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 28, 2012, at 12:11 AM, Krishna wrote:
hi folks,
i was wondering slrg and lrg are same in terms of functionality... can both
viewed as same ..??? please advise me on this query
will be a number in the range
of 16384 and 16424, inclusive).
In terms of QoS, if you are asked to deal with port ranges I would use the
superset (16384 32767).
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 30, 2012, at 9:01 AM, Krishna wrote:
hi folks
.
- Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Aug 30, 2012, at 12:18 PM, abollgoog ccie wrote:
One thing more ...
when i use debug isdn q931; i can see the (+) in the calling number; but its
not showing in the phones' screen !!
On Thu, Aug 30, 2012 at 8:13 PM
Outstanding! Congratulations.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Sep 21, 2012, at 10:52 AM, Justin McIntyre wrote:
I just wanted to say thanks to everyone that helped me throughout this
journey. It has been a very humbling and all inspiring experience
with this?
Good question. I just downloaded the .zip file from ipExpert and it doesn't
have an .aef for Lab 2. It has 6,7,8,9, and 10.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Sep 22, 2012, at 7:47 PM, Randall Crumm wrote:
Hello,
1. I am trying to get music
desktop admin
or http://uccxIP:6293/teamadmin/login.cda. Look for the fields section under
Enterprise Data.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Sep 28, 2012, at 3:21 PM, Randall Crumm wrote:
Hello,
I was working the new 5 labs lab 1. It asks to modify
Steffen,
I saw that note as well and (erroneously or not) dismissed it. I go with 16384
in my lab tests and my gear is 100% in my lab. It works and, unless the IE lab
requirements state something that suggests using something different I plan to
stick with 16384.
-Bill
--
William Bell
blog
ran into this a few times and I have seen
it on the list numerous times.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Oct 4, 2012, at 11:28 AM, Hector Gonzalez (ABT) wrote:
Hi have a constant problem with SRST doing my labs I can get SRST to work ok
This may be an oversimplified approach, but couldn't you remove the MeetMe
softkey from the ephone via an ephone-template?
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote:
Hello,
I am working on a CME Meet-me question(See
can upload this prompt file into
ipcc right?
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
William
the two
methods. It could be they are basically the same from an efficiency standpoint.
So, let's call my opinion an hypothesis or somewhat wild a** guess (SWAG).
-BIll
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Nov 17, 2012, at 11:13 AM, Mohamed Gazzaz wrote
slot.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Nov 19, 2012, at 5:25 PM, Ramcharan Arya wrote:
Hello,
Need help on setting up presence in CME for call park. I have enable presence
and BLF Speeddial when I park call BFL does not glow.
Can you
it is more
likely the proctor is making a good judgement call based on a richer set of
data.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Nov 30, 2012, at 2:05 AM, otunola.aker...@gmail.com wrote:
Hi guys,
I just wish to confirm this, is it true
in advance.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
is in the queue you will hear a - 1 after the
decrement, don't know whether there is also an increment step.
At the end it is your choice how you get your script working. Not the way,
only the result is graded.
Regards
Steffen
Am Freitag, 30. November 2012 schrieb William Bell :
I have
On Fri, Nov 30, 2012 at 4:05 PM, William Bell b...@ucguerrilla.com wrote:
I have a question that may really just come down to a matter of preference.
However, I want to make sure there is something that I am not missing. For
those who want to read along my question stems from IPexpert's One Week
to the party placed on hold
determines which media resource it will use. Does that MRGL contain the
multicast-enabled MRG (which holds the multicast-enabled subscriber node)?
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Dec 5, 2012, at 2:10 PM, Ramcharan Arya
option merely merged
configurations. Erasing the configs does a wr erase first and the loading of
the lab scenario is good to go.
You can check by doing a sho ver and look at the uptime.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Dec 12, 2012, at 3:54 AM
? Thanks a lot.
Kind Regards,
Gang Du
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
William Bell
), and CM hosts(s) are present.
If you are still hitting issues, we may need more information on the symptoms
(checking the phone display for any status messages that pop or checking the
status message log from the phone).
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter
in a manner identical
to what you describe. The latter URL, when provisioned with the correct
parameters, will get you the one button login experience you are looking for.
HTH
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 1, 2013, at 9:05 AM, singh wrote
this call, make sure it
works.. It is also possible that the question won't specify any testing
parameters. In this case, I assume any call test is possible. I'd actually even
expect the test to ask the candidate to ensure that integration to voicemail is
still functional.
-Bill
--
William Bell
seems petty. Just my opinion. That said, I am practicing both and will use the
one that is fastest and the one I am most comfortable with under a time
pressure.
-Bill
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 3, 2013, at 6:26 PM, CCIEing wrote:
Hi All,
I have
not found message is
coming from. Delete the directory URL under Enterprise Parameters and you
should get the desired result.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 2, 2013, at 4:24 AM, sanity insanity wrote:
Hi Guys,
I am disabling the corporate
to UCM-TFTP /
TFTP copy the file to flash
4. For CUE prompts, I use the CUE prompt management app
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 4, 2013, at 12:02 AM, singh wrote:
HI Guys,
I am planning to use Unity connection to record and download
or some other method).
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 4, 2013, at 7:58 AM, Derek Wyss wrote:
I would recommend knowing how to do it both ways as certain circumstances
might require it.
Derek
On Thu, Jan 3, 2013 at 11:21 PM, William Bell b
Check CUCM service parameters Display Original Calling Number on Transfer from
Unity. Set this to true.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 4, 2013, at 6:22 PM, Ramcharan Arya wrote:
Hello,
Have issue with particular task:
When someone
on this
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
William Bell
blog: http://ucguerrilla.com
Follow me on twitter @ucguerrilla
. That isn't to say there aren't
people who pass without this validation process. Just that I don't know of any.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 14, 2013, at 12:52 PM, Chrysostomos Christofi wrote:
Guys
they say that you have to be very fast
Not sure how it works at all testing centers but at RTP (US) it goes like this:
15 min orientation
4 hours lab time
20 min lunch
4 hours lab time
2-4 hours drinking --- this is optional
So, you get 8 hours for the lab and lunch is an additional 20 min.
--
William Bell
blog: http
bits/int (ms) (bytes) Active
123 1459200 1824 14592 0 101824 -
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 23, 2013, at 8:55 AM, Joe Fearday wrote:
Would someone please provide successful configurations for HQ BR1
Jason,
I am thinking that the Station KeepAlive Interval and/or Station and Backup
Server KeepAlive Interval is playing a role in the behavior you are observing.
These are CallManager service parameters. By default, they are set to 30s and
60s, respectively.
Regards,
Bill
--
William Bell
Server KeepAlive
Interval and found that CFUR engaged at around 15 - 20s. With default values,
it took between 55 - 60s for CFUR to engage.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 26, 2013, at 11:36 AM, William Bell wrote:
Jason,
I am thinking
Yes, you will have access to that path.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 26, 2013, at 1:15 PM, Barrera, Hugo wrote:
Greetings,
I just wanted to confirm is there actual access to the Cisco website,
specifically the following path during
to confirm.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 28, 2013, at 3:46 PM, Ramcharan Arya wrote:
Hi,
I have noticed when I run AutoQoS on sub-interface it automatically add
encapsulation CISCO on Inteface-dlci
Config Prior to AutoQoS:
interface
Nathan,
Did you by chance assign the gateway directly to a pattern? If a gateway is
assigned directly as the route option for a pattern, it is no longer available
for assignment to route group.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Jan 28, 2013, at 5
in a RL. Then add another RG to the
RL for a redundant call path. That second RG can be SLRG, in which case the
other SLRG-specific notes apply.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 4, 2013, at 8:38 AM, Suresh Bhandari wrote:
While calling from PSTN
).
Configure Unity Connection to Send Message Counts. I believe this parameter
would cause MWI-On to be sent for every new message. If you didn't address this
need then you could hurt yourself when the proctor leaves a new message for
validating VM.
--
William Bell
blog: http://ucguerrilla.com
twitter
1. ssh to sub:
utils dbreplication stop
2. ssh to pub:
utils dbreplication stop
utils dbreplication forcedatasyncsub
3. Go back to sub:
utils system restart
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 8, 2013, at 7:01 AM, peter adler wrote:
my home lab sub
achieve the desired result but I am wondering if the latter option
is preferred for any technical reason.
Thanks in advance,
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
___
For more information regarding industry leading
I don't have an answer for you. However, I can confirm that I have noticed the
same behavior. When I have associated custom tones for join/leave events, I
only hear the tone on join. Nada on leave. I haven't figured it out yet.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter
the barging party leaves and is no longer in the media path. If, on
the other hand, it simply says parties on the call should hear a tone when the
line is barged then there is no problem.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 17, 2013, at 9:45 PM
is display the +
on the call plane. But it should display it in the status line at the bottom of
the screen.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 19, 2013, at 4:33 PM, Steve Keller wrote:
Recently i have noticed a few things in my lab as i have been
they are in SRST mode.
I have a done a couple of tests using this method and it seems to work fine.
Though, I did see some flaky behavior with Subscribe Notify and MWI. Which is
the cornerstone of my tangent ;-)
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 19
,
recently I have been testing with SIP notify since it will preserve the MWI
status on failover. That said, I have (in my limited testing) seen that the SIP
Notiy option is somewhat flaky.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 19, 2013, at 11:05 PM
SRST. I have done some basic tests
and read the docs. It is supported and appears to work.
The benefits:
I don't have to wait for phones to failover to finish SRST related configs. I
can configure BACD, call coverage for VM, mwi sip, name, description, etc.
Thoughts?
--
William Bell
blog
values specify True (strip # sign) or False (do not # sign).
This is a required field.
Default: True
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 21, 2013, at 7:53 AM, Cory Gray wrote:
Some correct if I am wrong but I believe MGCP drops
I use UCCX to record prompts. It works fine. You can rename the .wav to .au if
you want. Still works fine.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 21, 2013, at 4:08 AM, Chrysostomos Christofi wrote:
Hi
I have use either IPCCX or CUC to record the BACD
I don't have that problem. I have done it with and without the predot-trailing
# and all calls work. Assuming we are running the same version of CUCM and more
or less the same version of IOS, I'd say there is a difference in how we
configure dial plans.
--
William Bell
blog: http
on ingress (just for
the gateway at a site) then I stick that pattern (and new partition) into the
config and move on. The benefit is that I don't have to go back into the
gateway and reset anything.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 27, 2013, at 2:31 PM
that SCCP will try to pack as many events in a packet
as possible. Wireshark will help you see this happening. Place a call to or
from a phone and I suspect you will see what I mean.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 27, 2013, at 4:39 PM, Jason
.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Feb 28, 2013, at 9:09 AM, Cory Gray wrote:
I would rather do it on the subscriber page vs changing the template multiple
times. I think that would be faster but as always, go with whatever you
practice.
From
Pixar,
Are you certain about the Phone NTP reference and CUPC? I have not heard that
before. I was under the impression that CUPC would use the clock of the
underlying OS.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 6, 2013, at 12:15 AM, Pixar Perfect
of the above interpretations is
correct. You are accounting for 4 G729 calls not 4 G711 calls with your BW
statement.
Sorry, not much help as the wording of the question is a little odd.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 6, 2013, at 11:19 AM
I have to ask. Am I the only one that thinks the requirement of There can be 4
concurrent calls. G711 CODEC to be used for multi-directional audio. is odd
when an earlier requirement states you should use G729 between sites?
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
may - depending on what
you want to do
- you may want to bind sip to a specific address
The specific configurations will depend on the scenario you are trying to
emulate.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 8, 2013, at 1:46 PM, CISCO CCIE VOICE
phones.
e. Make sure you use ccm-manager music-on-hold on SiteB gateway to service the
PSTN callers
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 11, 2013, at 3:52 PM, CCIEing wrote:
Hi Friends..
I have question on the MOH multicast, In case we have HQ
alternative scenario.
Hope that clarifies my response for you.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 12, 2013, at 4:26 AM, Jamie Parr (jamparr) wrote:
Some part of this don’t make sense to me
a. We should only consider G711 for multicast
). As far as
creating directories in the Class B file system, I am not sure. I have guesses
but nothing absolute. As soon as I realize that flash is formatted using Class
B, I reformat.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 12, 2013, at 10:51 AM, CISCO
information. Same as for H323 but easier since you don't need to do
the hex conversion. Again, not sure if there is a call statistics message
involved after disconnect.
You have peaked my curiosity. Thanks for that.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar
expect to have on the WAN and that matches one of
the codecs supported by the transcoder.
The allow connections under voice service voip shouldn't come into play in a
CUE-CUCM integration because the CUE-CUCM integration isn't SIP nor is it H323.
It is TAPI.
--
William Bell
blog: http
group 1
..stuff..
assoc prof 2 register sc-rsvp
assoc prof 3 register sc-xocder
..stuff..
!
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 20, 2013, at 7:20 PM, Vikky Kumar wrote:
Willam,
BR2 is CUCM site, and there is integration b/w CUE - CUCM
I
interfere with RDNIS to VM
4. This method doesn't interfere with direct or redirect calls from HQ or SiteC
Anyway, that is my 2 cents.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 20, 2013, at 9:33 PM, Bill wrote:
Traditionally you would use
softkey then the watcher will
see the status on the watch button)
The watched ephone-dn must NOT be a shared line
The watched ephone-dn must be the primary line on the watched phone
Requires allow watch on target DN (if on CME)
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter
the behavior. The default is 3
retries. Which accounts for the 4 prompts you are hearing.
The question should give you guidance here.
Given the way you presented the question, I would adjust retries to 0 and then
it should meet expected requirements.
-Bill
--
William Bell
blog: http://ucguerrilla.com
I have ran into a similar problem. In my case I would get a fast busy after
entering the extension number followed by #.
The issue was I neglected to provision Mobile Voice Access under Media
Resources.
On Tuesday, March 26, 2013, Barrera, Hugo wrote:
Regarding MVA during my first attempt
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
William Bell
blog: http://ucguerrilla.com
Follow me on twitter @ucguerrilla
, Hugo hugo.barr...@nexusis.com
wrote:
But would the MVA number still work on the gateway when you dial in? May it
would huh because the MVA AA on the IOS is separate?
Regards,
Hugo
From: William Bell [mailto:b...@ucguerrilla.com]
Sent: Wednesday, March 27, 2013 4:47 AM
I follow the requirements for site A phones but I mask with the number of the
VM pilot.
So, using ipExpert lab examples:
Site A would be +1202555 for the phones
Unity Connection VM Pilot number is 2600
I set the external mask on vm ports to +12025552600.
-BIll
--
William Bell
blog
the emask to the vmpilot number as part of base config template.
Now, if I wasn't already going into the VM port for another reason then I'd
likely say screw it unless there was a question that made me deal with it.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar
to the target CUCM cluster and use the
hairpin approach to launch MVA. Not optimal but certainly feasible.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 29, 2013, at 11:06 AM, Ahmad Taamneh wrote:
The gateway on the other cluster is mgcp, does it help
-region codec
settings according to lab requirements.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 31, 2013, at 3:55 PM, ie ravindra wrote:
Dear All,
Happy april 01st for all of you.. :-). Is there bug in voice LAB which we
need to use intra region
full-consult
secondary-dialtone 9
!
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 31, 2013, at 7:50 PM, Mike wrote:
I changed the hunt group and still didn’t work.
Does anyone have a working B-ACD config with drop through using a VoIP
dial-peer that I
is that you type out the IP addresses once. Then copy/paste into your
other config notepads / web interfaces as needed. I keep the basic.txt file up
all of the time. I actually put it in the top right of the screen so that I can
right click/copy quickly.
Just my 2 cents.
-Bill
--
William Bell
blog: http
validation. I also do
some minimum validation in-line with the configuration. But definitely keep
that at a minimum or you bleed minutes.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Mar 26, 2013, at 7:40 PM, Dane Warner wrote:
To All,
I took my second
dbreplication forcedatasyncsub
all
4. Reload Subscriber
This all takes 10 - 15 minutes, so try to avoid stupid mistakes and also try to
catch dbreplication issues early on
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 2, 2013, at 1:14 PM, Hesham Abdelkereem
keep
(or try to keep) console sessions in the middle and IE sessions near the left.
But I haven't really thought about it that much.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 3, 2013, at 12:32 PM, Ramcharan Arya wrote:
Hi Bill,
Thank you very much
dev reg before QoS then the scope of
issue root cause is smaller.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 3, 2013, at 12:58 PM, Suresh Bhandari wrote:
A real long mail to read But I read it entirely, not skipping a word.
Thanks Bill
since I can always rollback the snapshot on home VM if needed.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 3, 2013, at 6:47 PM, ikizoo4 kwon wrote:
Hello ALL
i am trying to activate CUPS service in SSH CLI, but it looks like not
working?
FYI, i am
No, I have not had replication issues in the real lab and I check the
replication after NTP, every time.
I have had replication issues in my home lab but only when I have done
something stupid.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 3, 2013, at 9:04
. Do not set this
feature for PRI trunks that are connected to the PSTN.
Note: This field applies to the NI2 protocol only.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 5, 2013, at 1:24 AM, ikizoo hello wrote:
Hello All,
i just trying to send out facility ie
You can't. The template is only used when creating users. There are bulk edit
tools on unity connect. Look under the Tools section in the navigation pane.
These tools may or may not expose the attribute(s) you wish to edit.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter
the PSTN line associated with your RD. It should work.
So, now you can't call 2025552001 from any PSTN line EXCEPT for the line
associated with the RD. That would be an interesting IE lab question.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 7, 2013, at 10:59
referring to
the parameter Mobile Voice Access Number . This is another parameter that
confuses me. I never set it and MVA always works. I am wondering if it is
legacy or is used for some other method to access mobility? Maybe part of CUMA?
Do you know?
-Bill
--
William Bell
blog: http
Not quite. The RDP CSS is used by the MVA process in CUCM to make the final
call routing decision.
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 7, 2013, at 3:46 PM, donny f wrote:
yes i had specified it under service param, so far i only restart the MVA
1 - 100 of 154 matches
Mail list logo