If you don't have a monitor and/or printer that are capable of
reproducing AdobeRGB (as in very expensive devices), you're wasting your
time and effort in trying to use it. Stick with sRGB. It's what most
monitors and printers are calibrated to.
Willy
, Willy Williams wrote:
I have three laptops on which Darktable is installed; two Windows 10
and one Ubuntu Linux. I generally sync the two Windows computers'
photos folders, including JPEGs, RAW files and XMP sidecar files.
I've begun to wonder if I'm shooting myself in the foot by doing so
Good point, Patrick. I'll have to check it again on my Linux system.
Willy
On 10/14/2018 at 17:59, Patrick Shanahan wrote:
* Willy Williams [10-14-18 17:03]:
Be sure that you use the command in the right form, like this -
F
Also read chapter *2.3.12.1. Usage *on pages 37-40 in that Fine Manual I
sent to you.
Wily
*
On 10/14/2018 at 16:59, Willy Williams wrote:
Be sure that you use the command in the right form, like this -
F:\\Photos\\Exports\\$(FILE_NAME
Be sure that you use the command in the right form, like this -
F:\\Photos\\Exports\\$(FILE_NAME). Note the double backslashes. It
works quite well.
Willy
*
On 10/14/2018 at 16:45, Michael wrote:
I've always wanted to be able to save to the
I have three laptops on which Darktable is installed; two Windows 10 and
one Ubuntu Linux. I generally sync the two Windows computers' photos
folders, including JPEGs, RAW files and XMP sidecar files. I've begun
to wonder if I'm shooting myself in the foot by doing so. The question
is this
Make two photos; one with the card and one without.
--
"There are no bad pictures; that's just how your face looks sometimes."
- Abraham Lincoln
--
On 10/10/2018 07:40 PM, Michael wrote:
How does one use an exposure card in darktable? I mean I know how to
spot white balance but how do you
Be sure that you have no size limitations in your Export Selected setup,
under global options, in the Lighttable view.
On 9/2/2018 at 12:54, Toby Haynes wrote:
I have been experimenting with the export options in Darktable to push
my NEF format photos over to Google Photos. Log in,
Just a quick note to all the developers of Darktable - Many thanks to
all who have worked so hard to produce such a great and competent photo
application. Your efforts are very much appreciated.
Willy
--
"There are no bad pictures; that's just how your face looks sometimes."
- Abraham
I use FreeFileSync (https://freefilesync.org/) to keep files on three
laptops (2- Win 10; 1 - Ubuntu Linux) in sync. When I open DT, I get a
window that recognizes the updated xmp files (if any) and asks whether I
want to overwrite older xmp files, just as you noted. The difference is
that I
Thank you, Pascal!
On 4/1/2019 at 11:41, Pascal Obry wrote:
Le lundi 01 avril 2019 à 15:24 +0200, Romano Giannetti a écrit :
On 01/04/2019 14:58, Jim Robinson wrote:
This 'joke' was removed from the master code about 3 weeks ago, but then
someone put it back!
Really? No! :-(... My
Had the same thing happen here on dt 2.6.2 on Win 10 Pro, and on dt
2.6.1 on Ubuntu Linux 18.04 LTS.
Willy
--
"There are no bad pictures; that's just how your face looks sometimes."
- Abraham Lincoln
--
On 4/1/19 8:43 AM, Kneops wrote:
I just opened DT for the first time today (version
I just export the edited files to my Exports folder. Once they're all
exported from a given job, I can move them en masse to a sub-folder
under the original date folder.
Willy
*
On 2/27/2019 at 19:08, Shane Simmons wrote:
I've been
I do hope that one day I'll be able to tether my Lumix G9 to darktable,
either on Windows or Ubuntu Linux. The good news is that in the
meantime, I can use the Lumix Tether app, but I'm not that impressed by it.
Willy Williams
Duly noted and done. Thanks for the prod, Patrick.
--
"There are no bad pictures; that's just how your face looks sometimes."
- Abraham Lincoln
--
On 3/17/19 1:35 PM, Patrick Shanahan wrote:
* Willy Williams [03-17-19 12:50]:
I do hope that one day I'll be able to tether m
I have the Wacom Intuos on my Ubuntu Linux laptop via the docking
station, but rarely use it, largely due to 1) my own unfamiliarity, and
2) lack of desk space. Must say, though, that it does work. Can't
answer the question about pressure-sensitive masks since I don't use
them (yet).
Willy
Admittedly, I am coming from a place of ignorance. I've just had to
completely reconstruct one of my computers due to a really pathetically
crappy push release from Microsoft that destroyed my hard drive. Is
there a way to back up one's presets and overall configuration of
darktable to speed
Well, the Martian must be hiding in your machine. ( 8*{)}
darktable renders that same image exactly the same as Firefox does on
Ubuntu Linux 18.04 LTS.
Willy
--
"There are no bad pictures; that's just how your face looks sometimes."
- Abraham Lincoln
--
On 5/25/19 11:16 AM, Postmaster
To cascade on Romano's well-stated response, I agree wholeheartedly.
Many of this forum's members are not native English-speakers and
sentences such as you originally posted are structured more like they
had been written by a glue-sniffing fifth-grader, not like a sentient
adult being. It
in the file explorer view tab to see it
mick
--
August Schwerdfeger
aug...@schwerdfeger.name
On Sun, May 12, 2019 at 7:11 PM Willy Williams
wrote:
Admittedly, I am coming from a place of ignorance. I've just had to
completely reconstruct one of my computers due to a really pathetically
crappy push
Am Mo., 13. Mai 2019 um 14:51 Uhr schrieb Willy Williams
mailto:grayc...@bolthole.net>>:
Thanks for the input. I have found it there.
It's best to go into File Explorer as Mick suggested, click on
Show hidden files, folders, and drives, then find
C:\Users\[UserName]\A
Suggest that you go to the command prompt [Win-R], then type in "winver"
without the quotes. Then add that info to your post. Version 1809 is
known to not be one of MS' best releases.
Willy
*
On 5/19/2019 at 18:50, Michal K wrote:
Apologies
I got it last week via the PPA.
Willy
--
"There are no bad pictures; that's just how your face looks sometimes."
- Abraham Lincoln
--
On 5/14/19 8:13 AM, Sakke K wrote:
I saw an announcement of the release of DT 2.6.2 a while ago, but it's
not in the PPA for Ubuntu 16 lts yet. Any idea
Under Windows 10, the file is C:\Program
Files\darktable\share\darktable\darktable.css.
* {
font: 8pt Sans;
color: @fg_color;
background-color: @bg_color;
border-color: #11;
text-shadow:none;
/* margin: 0; */ /* this makes scroll bars super wide. */
padding: 0;
Frankly, the only one that looks anywhere near real is the .NEF file.
The other two look utterly like crap. Both look like overblown and
poorly done HDR shots. Have to ask what processing you did to achieve
these results.
Willy
On
Please read this page -
https://www.darktable.org/resources/camera-support/.
Willy
**
On 8/18/2019 at 19:21, nikted wrote:
"did you provide the sample raw files necessary for darktable to recognize
your camera? that is the *first* necessary step.
You might want to look in the Export selected module (2.3.12, p. 36 in
the Fine Manual). You can set the max size easily and darktable will
scale the image down appropriately.
Willy
--
"There are no bad pictures; that's just how your face looks sometimes."
- Abraham Lincoln
--
On
So, why not use the Julian style naming convention, i.e., September 2019
would be 201909, etc.? That would be easier for sorting, too.
Willy
***
On 9/20/2019 at 11:01, Patrick Shanahan wrote:
* Archie Macintosh [09-20-19 10:22]:
On
Many thanks, Pascal!
Willy Williams
***
On 2/12/2020 at 7:08, Pascal Obry wrote:
Thanks to Matt Maguire for building a script to build the documentation
we are now in better shape to build it.
So I have created the PDF which can be downloaded
I got the same thing. It's no big deal.
Willy
***
On 1/24/2020 at 3:12, Jaroslav Huba wrote:
Hello
I am trying install darktable on Windows 10 Pro / 64 and got this message
Is safe install it ? Why this happened?
thanks
j
Some cameras do not have the current capability of adding copyright data
within the metadata. My Lumix cameras are just such. My former Nikons
could do so, but not the Lumix models. That request has been registered
with Panasonic already regarding the Lumix models.
Willy
--
"You don't
to have not been disturbed.
Happy Holidays to all!
Willy Williams
*
On 12/24/2019 at 3:08, Pascal Obry wrote:
Hello!
We are proud to announce the release of the 3.0 feature release.
It is a very important major release with a redesign
If you're duplicating images, you'll have two different file names, as
well as two different sidecar files with the same names as their
associated JPEG files.
Willy
On 1/4/2020 at 18:10, Sherwood Botsford wrote:
Consider the
Not entirely true, according to "The Fine Manual". Look on p. 11.
1.3.1. Importing images
To begin with darktable, you first need to import images. The import
module is in the
left panel of the lighttable view (Section 2.3.1, “Import”). *You
can either import from the**
Click on the small triangle dead center bottom of your screen until you
get it visible again.
Willy
*
On 3/11/2020 at 09:44, Jan Minekus wrote:
Hello
I'm using darktable 3.01 on windows computer - windows 10 - 64 bits home.
After the
I seem to have discovered a malfunction in that the Module Groups
Control Bar (Section 3.3.9 in The Fine Manual) has seemingly disappeared.
(Screen shot below from my laptop)
I've searched The Fine Manual for a shortcut that I may have
inadvertently activated to hide it, all to no avail.
:26 a.m., Willy Williams wrote:
As requested - https://sparkwerximagesllc.pixieset.com/problemchild/.
Interestingly, this is occurring on only one of three machines.
Willy
**
On 4/18/2020 at 13:27, Patrick Shanahan wrote:
* Willy
As requested - https://sparkwerximagesllc.pixieset.com/problemchild/.
Interestingly, this is occurring on only one of three machines.
Willy
**
On 4/18/2020 at 13:27, Patrick Shanahan wrote:
* Willy Williams [04-18-20 13:24]:
I seem
My Lumix G9 does focus stacking in camera, then I punt it out to
darktable for finishing. Can your body do that, too?
Willy
**
On 4/19/2020 at 17:46, J. Paul Bissonnette wrote:
On Sun, 19 Apr 2020 14:43:01 -0700
David Vincent-Jones
If your camera body has the capability to stack images within the
firmware, and to output both JPG and RAW images already stacked(as so
many currently do), why do you need an additional body of work to be
added to the post-processing within darktable or Hugin? I'm curious as
to the thinking.
I have a similar issue. Two identical (hardware-wise) HP laptops; one
with Windows 10 Pro, the other with Ubuntu Linux 18.04 LTS, The Windows
machine reads the images while they're in the camera (Lumix G9) via USB3
cable, when I put the SDXC card into the machine's built-in SD card
reader
s attached to the Linux computer. HOORAY!!! I still can't
tether to the camera, but that's another issue in that the G9 is not
supported for tethering yet.
Willy
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 3/13/20 10:45 AM, Willy Will
. Am I not looking in the right place, or holding my
mouth incorrectly? Is anyone else experiencing this issue?
Willy Williams
--
“You don’t take a photograph. You ask quietly and humbly to borrow it.”
- Unknown
Usage/Metadata
On 18/05/2020 17:52, Willy Williams wrote:
I've just noticed that photos exported from darktable seem to have been
stripped of metadata regarding the image. I looked back to images that
were exported using v3.0.1 and v3.0.0, and those images have the
metadata included. I don't
If you're talking about the skulls, I'd suggest that you look at Section
2.2.3.2 in "The Fine Manual".
Willy
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 3/24/20 11:19 AM, J. Verreault wrote:
Hi all,
I've included a couple of screenshots of
when the watermark is applied to an
identical test photo on each machine. The script logo does not shift at
all; it's just the three lines below the logo that shift. Am I not
holding my mouth right? Did I forget to perform some weird incantation
on the full moon?
Willy Williams
--
“You
On 10/12/2020 at 19:53, Guillermo Rozas wrote:
The logo looks identical on all three
machines when viewed in Inkscape, yet when it is exported into the
appropriate location for user-generated watermarks in darktable on
each
of the three machines, the two lines of text below
! :-)
Willy Williams
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 10/3/20 1:42 PM, Remco Viëtor wrote:
On samedi 3 octobre 2020 19:14:36 CEST Top Rock Photography wrote:
One thing which occurred to me, and I cannot see why this will be so, but
found a folder named "watermarks", so I
created one and populated it with the .svg files, but darktable doesn't
find them. I've searched for ".svg" to no avail. I've found the
location under Win 10 and my .svg files populated into darktable just
fine. Anyone have a cl
OK, I found the watermarks location under
"Computer/usr/share/darktable/watermarks", but it's locked and I am
unable to paste the new .svg files into that location. How does one
unlock that structure? I'm a Linux Noob (must admit it).
Willy Williams
--
"You don't take a pi
Thank you, Patrick. Having done that (note the screenshot below),
darktable still can't seem to find these three files.
And yes, I do need more time getting into the file system.
Willy Williams
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
watermarks. Thanks for your help and guidance.
Willy Williams
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 10/1/20 8:23 PM, jys wrote:
On Thu, Oct 1, 2020, at 12:36, Willy Williams wrote:
OK, I found the watermarks location under
&qu
in darktable under Ubuntu Linux, and the fact that the
two will not look identical under both operating systems due to Windows'
ability to kern fonts as needed while Linux seems to lack the kerning
ability.
Willy Williams
***
On 10/13/2020 at 16:44, jys
to see if Inkscape can do that. Thanks for the suggestion.
Willy Williams
**
On 10/26/2020 at 9:04, Remco Viëtor wrote:
On lundi 26 octobre 2020 13:27:52 CET Willy Williams wrote:
The end result found is that Inkscape does not have the ability
This whole issue seems to be a solution in search of a problem. I'm
just sayin'...
Willy Williams
On 10/25/2020 at 22:24, Matt Maguire wrote:
It's because the favorites tab is made redundant having the ability to
fully customise
This is one option not yet explored.
Willy Williams
**
On 10/26/2020 at 8:43, Guillermo Rozas wrote:
The end result found is that Inkscape does not have the ability to
embed fonts into a .svg file.
Have you tried converting
And the answer is that converting text to a path did the trick, once I
figured out how to do the job. :-P Patience is NOT my strong card. A
big "Thank you" to Guillermo for pointing me in the right direction.
Willy Williams
--
"You don't take a picture. You ask qui
"The github release is here:
[https://github.com/darktable-org/darktable/releases/tag/release-3.2.1](https://github.com/darktable-org/darktable/releases/tag/release-3.2.1)."
Willy
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 8/10/20 10:09 AM,
In that same vein, you might turn off the power to your computer, pull
off the bottom cover of the computer and use compressed air to blow out
any dust accumulation. I'm always surprised by how much dust
accumulates in such a short period of time.
Willy
I'd suggest an addition - go to Preferences - *GUI options* - darkroom -
'show search module text entry, select 'show both'.
Willy
**
On 7/8/2020 at 5:36, thokster wrote:
Hi,
check in preferences - darkroom - 'show search module text entry'
You
One more link -
https://fstoppers.com/astrophotography/how-photograph-comet-neowise-8-steps-499290.
Willy
**
On 7/15/2020 at 09:20, Niranjan Rao wrote:
Thank you. I have lot of homework to do.
Regards,
Niranjan
On 7/15/20 5:02 AM, Willy
Niranjan, here are a few links you might want to look at:
*
https://wtop.com/gallery/the-space-place/photos-passing-comet-is-visible-at-shenandoah/
*
https://petapixel.com/2017/04/07/npf-rule-formula-sharp-star-photos-every-time/
(The NPF rule will give you sharper images than the Rule
The exact same situation exists on my Win 10 machines with 3.0.2.
Willy Williams
On 6/21/2020 at 2:12, Terry Pinfold wrote:
Tried to replicate Terry Duell's problem with Windows 10. If DT was
closed DT opens with the image as expected
t worry me as it is not
something I ever do.
Jim
On Sun, 21 Jun 2020 at 12:31, Willy Williams <mailto:grayc...@bolthole.net>> wrote:
The exact same situation exists on my Win 10 machines with 3.0.2.
darktabl
If I were to prioritize darktable for either image editing or digital
asset management, I'd choose image editing and manually place files in
locations where they make sense to me to be. It the developers could do
both, great, but keep the priority on image editing. One thing that
really
In the same location, look for "panel_width=325". 325 works best for me
on any monitor from my laptops with 1920x1080 resolution to 27" external
monitors similarly at 1920x1080 resolution. Feel free to experiment.
Willy
--
"You don't take a picture. You ask quietly and humbly to borrow
Also look for "screen_dpi_overwrite=-1.0" and modify as needed.
Willy
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 6/3/20 1:01 PM, Willy Williams wrote:
In the same location, look for "panel_width=325". 325 wor
Both methods work, Bernhard. The person asking the original question
now has two good possibilities to answer his needs.
Willy
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 6/4/20 2:42 PM, Bernhard wrote:
Willy Williams schrieb a
known
--
On 6/3/20 7:56 PM, Al Bogner wrote:
Am Wed, 3 Jun 2020 13:01:49 -0400
schrieb Willy Williams :
In the same location, look for "panel_width=325". 325 works best for
me on any monitor from my laptops with 1920x1080 resolution to 27"
external monitors similarly
for the
same item. I appreciate the time that you took to compile this list and
push it out to the user body. Perhaps it would be a good thing to add
this list to the darktable website? Thank you again.
Willy Williams
**
On 7/26/2020 at 7:00
More good info! Thank you again!
Willy Williams
***
On 7/26/2020 at 8:29, KOVÁCS István wrote:
On Sun, 26 Jul 2020 at 14:02, Willy Williams wrote:
Perhaps it would be a good thing to add this list to the darktable website?
Thank you
You could embed a watermark on the photo and position it such that it's
visible, but out of the way.
Willy Williams
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 7/27/20 2:47 PM, Kent Tenney wrote:
Howdy,
I've come to like the Shotwe
If you're going to do a serious test, you might want to consider using a
standard ColorChecker card (https://en.wikipedia.org/wiki/ColorChecker)
to ensure that the colors you perceive are close to a known industry
standard.
Willy
--
"You don't take a picture. You ask quietly and humbly to
I got the same message, but installed anyway on two Win 10 machines and
one Linux machine, and have had no issues whatsoever after having done so.
Willy Williams
**
On 12/27/2020 at 12:15, Marc Cabuy wrote:
Neil,
That is strange. I tested
My thanks to the entire crew of developers for this wonderful release,
and to Bruce Williams for four terrific videos (so far) to educate and
amuse. Blessings to all for a wonderful New Year!
Willy Williams
--
“You don’t take a photograph. You ask quietly and humbly to borrow
There's a better link (https://www.darktable.org/resources/) to the
manual which can be read online, and if you go farther down the page,
you can download a PDF of the manual. Be aware that while darktable is
in version 3.2.1 right now, the current manual is only to version 3.0.
There is a
I've tried the perspective correction on the NEF file provided by Petr
and can confirm that his assessment is accurate regarding the issue
experienced. I, too, do not see any small OK button anywhere in the
photo. If I apply the correction as Petr did, and subsequently move up
the module
the module finalizes the changes.
On 2020-12-08 12:31 p.m., Patrick Shanahan wrote:
* Willy Williams [12-08-20 13:30]:
I've tried the perspective correction on the NEF file provided by Petr and
can confirm that his assessment is accurate regarding the issue
experienced. I, too, do not see any small
Do you know how to open a terminal window? If not, click on
"Applications", then type in "terminal" in the search box at the top.
That will put you at the Command Line Interface (CLI) where you can
enter the appropriate commands. Give it a shot.
Willy Williams
It appears that this is dead-on. When I connect via USB to my one Linux
computer, the darktable import function recognizes both cards while
they're still in the G9. Thanks for the heads-up.
Willy Williams
--
"You don't take a picture. You ask quietly and humbly to borrow it."
cards that are still in their
respective slots in the G9 body. YMMV...
Willy Williams
On 1/3/2021 at 11:16, Bernhard wrote:
Sorry, but why not simply do things the RIGHT way?
I just put a SD-card into my card reader, plugged it in and darktable
i
Interesting! On my machines, I still can get to the setting for folder
levels under [Preferences / lighttable / number of folders to show in
lists] where it is set to 3.
Yet, if I look in darktablerc, I see . It appears that Preferences
overrides darktablerc. True or false?
Willy
'.
Willy Williams
**
On 1/5/2021 at 10:23, Patrick Shanahan wrote:
* Willy Williams [01-05-21 10:17]:
Even more interesting! I'm on Windows 10 (2 machines), with levels set to
"3" in preferences, yet darktablerc still shows levels
\darktable. The local version on my
machines DOES show file folder levels matching those in preferences.
Duly noted for future reference. Thanks again, Remco!
Willy Williams
*
On 1/5/2021 at 10:23, Remco Viëtor wrote:
On mardi 5 janvier 2021
Even more interesting! I'm on Windows 10 (2 machines), with levels set
to "3" in preferences, yet darktablerc still shows levels set to "1".
I'm using the general release of darktable 3.4.0, not a daily compilati
The answer is that I had been looking at the *original* version of
darktablerc. The *user* version indicated the correct number.
Locations of both Windows and Linux versions have been noted for future
reference.
Willy Williams
--
"You don't take a picture. You ask quietly and h
nd updated, that's why there are so many
"versions". It's supposed to stabilize once darktable 3.6 is out.
Please read the Documentation section on
https://www.darktable.org/2020/12/darktable-3-4/
Regards,
Guillermo
On Tue, Jan 19, 2021 at 10:49 AM Willy Williams <mailto:grayc.
. So how is one to know which of these
five is the most current, leading edge document, but not the bleeding
edge (development) version? One could very easily become confused by
the plethora of literature?
Willy Williams
--
"You don't take a picture. You ask quietly and humbly to b
er...". When the folder
window pops up, look for your camera and find the folder on your camera
that contains your images. Piece of cake!
Willy Williams
**
On 1/1/2021 at 11:53, Tom Whale wrote:
On 01.01.2021 at 02:12 nanoq wrote:
Hi J
as opposed
to being a camera mass storage device.
Willy Williams
**
On 1/3/2021 at 11:56, Willy Williams wrote:
My Lumix G9 cards do not appear as your illustrations show. Whether I
1) run a USB 3.0 cable to the body from the computer, o
And to pile on, Bruce Williams has done an excellent job of creating a
video (Episode 79) (https://www.youtube.com/watch?v=L7adCF2FvU8) that
explains this concept very well. Thanks again, Bruce!
Willy Williams
*
On 12/31/2020 at 10:39
9 is
not recognized by darktable for tethering.
Willy Williams
--
"You don't take a picture. You ask quietly and humbly to borrow it."
- Unknown
--
On 1/2/21 10:44 AM, KOVÁCS István wrote:
On Fri, 1 Jan 2021 at 20:27, Willy Williams wrote:
When you open lighttable, you'll see
to be imported when darktable is opened and the folders are
accessed.
Willy Williams
*
On 1/2/2021 at 13:05, DougC wrote:
I agree. Also, a high quality SD card reader can be significantly
faster (10x or more) than a cheaper one.
A good one
s can, of course, still
create their own custom group and name it “favourites” if they
so desire.
Willy Williams
On 12/30/2020 at 18:24, Terry Pinfold wrote:
HI all,
Darktable is a fantastic program thanks to the i
odule should appear under which
group."
Willy Williams
*
On 12/31/2020 at 10:30, Willy Williams wrote:
So, make your own "Favorites" module. From -
https://www.darktable.org/usermanual/en/module-reference/utility-mod
I find that if I need to denoise and/or sharpen, I'll get great results
by using Topaz DeNoise AI followed by Topaz Sharpen AI before pulling
the results into darktable for final finish work.
Willy
On 2/2/2021 at 12:36, Giulio wrote:
Il 02/02/21
I did, Patrick, due to Kofa and Bernhard's illuminative responses.
Willy
On 5/23/21 at 10:07 AM, Patrick Shanahan wrote:
* Willy Williams [05-23-21 09:10]:
On 5/23/2021 at 3:22, Bernhard wrote:
I experience again and again
Thanks, Kofa. That makes sense and confirms my suspicions.
Willy
On 5/22/21 at 5:01 PM, KOVÁCS István wrote:
On Sat, 22 May 2021 at 21:28, Willy Williams wrote:
I can find no reference to being able
to export images while down
I reading through The Fine Manual, I can find no reference to being able
to export images while down-sizing them to a specific maximum file size
(in MB, not pixels). Does this capability exist at all?
Willy Williams
--
“You don’t take a photograph. You ask quietly and humbly to borrow
On 5/23/2021 at 3:22, Bernhard wrote:
I experience again and again that in forums both the length and the
width of an image and additionally the file size are limited.
And THAT is precisely why I posed the original question.
Willy
The problem of an algorithm is probably the same as the
1 - 100 of 162 matches
Mail list logo
