That's exactly what I did, I changed I it to something like 73 de Dave, G3NKC,
the call is set to pull in the correct call filter too
73 Dave G3NKC
Sent from Samsung tablet
Original message
From: WA7AA
Date: 02/08/2018 06:08 (GMT+00:00)
To: dx4win@mailman.qth.ne
Hi;
I finally chose to upgrade my DX4WIN to the latest on Sunday, I got the
order confirmation immediately.
How long are we then waiting for the new key?
I ordered an Echo Dot at the same time, that arrived in the post today !!
(Its not in by Junk mail folder either )
73
Dave G3NKC
__
thats my worry John, I'm not doing data modes
I use DX4WIN as I have done for 17 yearor so, but i dont hear anything
revolutionary with V9, that thinks I must upgrade ?
It's on my back burner until after PZ5K
73
Dave G3NKC (&PZ5K )
Sent from Samsung tablet
Original
Is there a list of enhancements somewhere ?
If its a costed upgrade, I would want to see whats new ?!
73
Dave, G3NKC
On 20/10/2017 01:45, Paul van der Eijk wrote:
Hi,
When you order the update using an AOL email address, the chances are high
I never get to see that order. GMAIL has issues w
Hi Paul,
If you're ever looking at Clublog filters, and how they import/ modify Dx4win
data, I use OQRS now as my prime means for label printing, since I have many
requests now on line, for the DX calls we have used.
When I then imprt the QSL status into DX4Win, I noticed the ARRL update
Hi Ed, thanks for that tip, log restored with 130k QSOS
I had a back up, but not totally up to date.
73 Dave G3NKC
Sent from Samsung tablet
Original message
From: Ed Stratton
Date: 13/01/2017 00:28 (GMT+00:00)
To: Dave Sharred , dx4win@mailman.qth.net
Subject: Re
Hi all,
I just had a PC lockup, after saving one of my log files.
Now, when I try to open the log file, I get the error message "This is
not a DX4WIN logfile"
All other logfiles open OK. Is there a way to recover this ?
Never encountered this problem before; Norton was running at the time
Manually, since I generate my labels in DX4WIN
73 Dave G3NKC
Sent from my Sony Xperia™ smartphone
John Balsillie wrote
>Hi, can someone tell me how they are up dating their DX4WIN log with the QSL
>information from the Clublog OQRS adif file?
>
>Cheers
>John ZL1ALZ
>
>
You should be ok just cutting and pasting the DXL files into the new
location Glyn.
I recently did this with my Win 8 PC (I used AD1C's notes to take the
country files etc too; like a version update )
73
Dave
G3NKC
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net]
Even if both are transistor keying (open collector, same polarity); you still
wont have any probelms. the output that is keying wins!
73
Dave
G3NKC
From: Barry
To: dx4win@mailman.qth.net
Sent: Wednesday, 9 January 2013, 16:30
Subject: Re: [Dx4win] operati
Not Jim, but I may have the answer: it shoudl be yes, with some caveats.
I assume that you have a good serial keying lead already ? I know nothing about
the Heathkit keyer.
the normal way is to get a jack plug Y adapter for your radio ; that is, 2
quarter inch jacks to one output that goes to
I think Dicks point is a fair one; when you look in a wider context.
Some people would like the ability to upload more frequently; this is down
to personal preference. Other programs offer this.
Some people would prefer to see automatic connection (and reconnection) to
your favourite cluster, tha
Hi,
Just tried to update my main log (using DX4WIN v 8.05), with eQSL
confirmations. I can only see that I can download the entire confirmations
file (is 8900 QSO's).
When I import this (set eQSl flags); DX4WIN hangs and is not responding.
Am I doing something wrong ??
73
Dave
This is an idle curiosity note/observation
There are many WPX awards; but the filter just seems to collect band mixed
totals. This is good for tracking band awards and mode awards, but not for
Continental awards.
Am is missing something, or is there another way to do this ?
73
Dave
G3NKC
_
Am not at home at teh mment (on in front of DX4WIN); but a few points come to
mind:
Are the awards set up? You need to go into the reports menu to do this; but you
might also have to go into preferences too, to enable bands/modes. In reports,
you would need to set up tabs for all awards you ar
Karl
I used the example in my log of 7O6T; which is a new country, and hence of
course a new prefix
Since this is LOTW confirmed, the country window would show as a "C".
However, the way DX4WIN is, by default; you would need a real QSL to make
the WPX window change to a C; so it shows as a "W" s
Hi Paul,
On a different note, is there any forward visibility of any planned updates
to DX4WIN, either incremental or major releases?
I know you had a few things I think on the back burner, a year ago.
73
Dave
G3NKC
__
DX4WIN mailing
Alan
This is quite simple; but I would recommend that you filter your log, and
set the call signs up as groups, assuming you are talking about USA calls
only??
1) ensure that you have a call sign attached to all of your logs. I would
hope that ion the "Group" filed in your QSO window, you see G
Jim, I did raise the subject a while ago; and I think there are 2 locations
where the programm id is in the ADIF - I think it is on Paul's list for some
future DX4WIN release??
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
O
In the same way, my groups are often set up as:
MD4K TEAM @IO74QD
MD4K TEAM @IO74TJ
So that when you print the labels using the standard greeting command @@ 73
de %%", you get "73 de MD4K TEAM @IO74QD"for each QSO.
If you create a new group, you must remember to give it a name though, of
th
Put (old) after the info???
73 Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: 23 August 2011 06:55
To: DX4WIN Reflector
Subject: [Dx4win] What to do about expired/cancelled QSL managers?
A cou
Hi Michael
Some while ago, I commented that Clublog doesn't pick up on my Program type;
even though eQSL and I think LOTW does.
I was spurred on into looking at this; following comments about the Program
stats on the Clublog page; and I noticed that ClubLog does not pick up on
this 44% of t
Peter; I tend to do mine now only from creating submission report, and
filtering out the LOTW ones by checking on line; although I only have a
small amount of updating to do (my challenge score is 2300 area)
You should look at the Reports // Award setup for DXCC; you can deselect QSL
card and look
Larry,
I think this only worked with the F2 key ?
Under the preferences menu, F2 Key, Confirmation options box there is a
check box for this
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Larry M. Leitch
Sent:
Alan,
Jim replied to most of your note, so don't need to repeat that.
As regards conventions, the first thing I would check if you have so many
DXCC's is - how many of these countries is uploaded to ARRL LOTW - that will
minimise what needs to be checked at a convention.
Then, I usually downloa
Good morning Eric.
I assume that you have no preference for which cards you will send by Global
QSL ?
If you print QSL's; you could select the option to print a range of pages;
so only print enough to use on your cards. There may be some trial and
error with this; but estimate low, run off a pri
Bill
Or do as Jim Said, but Select the Submission report from the drop down list
- That shows all entities confirmed, that count towards your award AND
moves them in your log to submitted !!
All you then need to do is copy that detail onto the IOTA web site
submission, dig your cards out, and a
Once in the needed listing; you can clearly see which countries are worked
only (W=worked; L=Labelled; M=Mailed)
In that report, if you double click on the entity/ band or mode, all QSO's
with that country are listed, so you know who you have to target !!
73
Dave
G3NKC
-Original Message
I too am confused about the notfound file.
I have just done a test; if you import an ADIF twice (in mycase, I did just
that; in practice, if someone uploads a QSO with me twice in LOTW) the 2nd
QSO then is summarised in the dialogue box as "x" duplicates, and is
included in the notfound file
I
Your question is an easy one to answer Alan:
In Excel, Highlight the column you are interested in.
Do a RH Mouseclick on the column, select "Format Cells"
Select "Custom" ; you will see General showing as selected in the first item
on the list
Just over type this with "" ; and the job is do
Go into Setup Parameters; Personal; you need to set Worked cutoff and
Mailed cutoff to Zero !!
" Worked Cutoff
QSOs worked longer ago than the number of days specified will be marked as
'not worked'. Used to ignore QSOs that are not likely to be ever confirmed
because they took place too long ag
HI Dennis
I know I replied off group; but I have found something strange on this.
I created a new log, for this test.
I entered a QSO with F5VHY on 20m, for today; then checked the Reports tab,
and looked at DXCC Summary - I have France worked of course.
I changed the QSO date to 01/01/1983, j
15m QSO's Jim !!)
73
Dave
G3NKC
-Original Message-
From: jjreis...@gmail.com [mailto:jjreis...@gmail.com] On Behalf Of Jim
Reisert AD1C
Sent: 15 October 2010 16:37
To: Dave Sharred
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Cross posted - DX4WIN Spot colours and ADIF country
assi
Sorry; I sort of assumed that the earlier comment was not the same as mine
!!
Thanks to Andy, G3SVD
73
Dave
G3NKC
From: Dave Sharred [mailto:g3...@yahoo.co.uk]
Sent: 15 October 2010 12:42
To: DX4WIN Reflector (dx4win@mailman.qth.net); club...@googlegroups.com
Subject: Cross
Hi Jim,
Further to the posts on colours for DX Spots; I too seem to see erratic
behaviour on PJ spots; with quite a few appearing in yellow despite the fact
that I have worked the same station on the same band/mode already ! I have
the latest country file and ADIF.PMP installed.
By example, P
That's strange Paul;
Mine is perfect; PJ0J = PJ7/D
PJ2MI - PJ2/D
Think you may have done something wrong
73
Dave G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of F6EXV Paul
Sent: 11 October 2010 09:51
To: dx4win@mailman.
:01
To: Dave Sharred
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] eQSL and DX4Win interface help
On Fri, Oct 8, 2010 at 7:59 AM, Dave Sharred wrote:
> IN Dx4WIN, it looks like the same process to import eQSL - but how do
> I get a confirmed only file from eQSL? Couldn't see it on
Hi
Finally I think I should look to import my eQSL status, since that now works
for CQ for example, into my logbook.
With LOTW; it is easy to see how to export confirmed data; and also do
incremental updates (i.e. last export dates). It is also easy to import this
data into DX4WIN.
IN D
programme is
running. Booting up process is always going fine.
I never had problems whatsoever when using the software in my older laptop
which its OS was Windows XP.
Tnx es 73 de Jo, YC0LOW
On Wed, Sep 15, 2010 at 9:50 PM, Dave Sharred wrote:
> To be clear in Jo's initial email; are you
To be clear in Jo's initial email; are you talking about start up of DX4Win or
when the program is running?
If you are talking at start up; I have seen the same sort of behaviour on 2
PC's (Win XP and WIN7).
IN the past (XP, older PC, earlier DX4Win) I also concluded that the driver was
not
Hi George; I thought "L" was QSO marked for printing (L abel) ??
This happens when you have a Y (es) in the label field.
I just tested this , and it is correct.
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf O
Hi Mel
I understand your problem with this; but I don't see a proper solution. I
can only speak from the IOTA perspective (Since I have IOTA awards, but not
RDA), there can only be 3 answers to my mind:
1 - RSGB/IOTA share info with ARRL LOTW or eQSL - not very likely
2 - Paul modifies the Log
Hi Jim; Just tried this;
with your first filter potential errors could be(all showing as EU Russia):
UN9/UA1AET June 1992
UA3DPX/0 July 1994 (I already have a zone 18 rule in ClubLog for this)
UA4RC/9/P June 1999
UA4LU/9/P June 1999
With the UA9 filter:
EK0DAP/4K4 (May 1990) (not really sure
Should be easy Brian;
1) Filter the QSO's in question - F8; select the group name; and maybe
that dates of the QSO's you need to change
2) Select QSO , Multiple QSOs operations, Set Group Number ; then
change Group number !!
I think thhat there was something special about ) by the way; you
You didn't explain why they don't agree; but there is a simple way to
reconcile them - check www.ad1c.com; he has a small utility to compare //
correct the errors.
One point - are you importing LOTW flags from err. LOTW ? This is
essential.
73
Dave
G3NKC
-Original Message-
From: dx4wi
Hi Paul
Welcome to 8.03 !!
1/ In the example you give, the only report worth generating might be
"Submission" That report exports to a file; Std fields are date, time,
call, IOTA, Island, Freq, Mode. I just tried it; and it looks good to me !
Of course, with IOTA a print out is not necessary, s
Hugh
I think that this old chestnut has been covered before; CW DXCC was only valid
for QSO's after Jan 1, 1975 - check teh DXCC rules.
You will find in DX4WIN reports this validation date appears
73
Dave
G3NKC
--- On Thu, 11/3/10, Hugh Valentine wrote:
From: Hugh Valentine
Subject: [
Carter
No-one else has commented yet; but that is not the approach I would have
taken.
Version 5.03 is a long way from where we currently are; I personally would
recommend that you upgrade to the latest version !
If you are intent on getting your logs going on 5.03 first, on your new PC;
AND you
Randy
No-one has come to your Aid yet, but you might have done nothing wrong, just
not completed the process.
You found "preferences"; and you want to check Packet 1 tab. Assuming you
are using Internet, you use Cluster interface Type - Regular, COM port -
TCP/IP, the rest shouldn't matter.
IN
Hi Pedro
HNY 2010 to you.
This has been covered many times before; and is even listed on Jim AD1C's
website. Please follow the link
http://mailman.qth.net/pipermail/dx4win/2009-August/013149.html
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun
Hi All
Just discovered something else that has caught me out in upgrading from 8.02
to 8.03 - IOTA database.
If you look at the help notes, and you chase IOTA, there is a database file
that you need from the IOTA web site -
http://www.rsgbiota.org/xml/fulllist.xml . This is saved in the "SAVE"
di
Hello Isidro
I am not sure why I had the problems I reported -
I use 2 PC's; the ADIF.PMP file date is the same, which must have been in
the 8.03 download.
the DX4WIN.CTY file now uses the same version (Shack PC is ok). When I
installed 8.03; I merged the country file with Jim's instruction/metho
Mel
I don't think it is small errors that caused the problem I reported; it was
DX4Win log interpreting , say TK0KP/SAN as Corsica as displayed; and the
ADIF export interpreting it as the ADIF code for Sweden.
I checked it with the ADIF web page; so I understand what is screwed, but
not how it g
to fix the file!
Most of the errors I reported were in this category I think...
73
Dave
G3NKC
-Original Message-
From: F6EXV [mailto:f6...@wanadoo.fr]
Sent: 28 December 2009 12:25
To: 'Dave Sharred'; 'Dx4win'
Subject: RE : [Dx4win] Strange errors in ADIF export
HI
Just trying to cleanse a Club Log import; but it looks like I have some
corruptions in the ADIF export from DX4WIN; as shown below.
Not sure if this is a program issue, or just a database issue. I have
cleansed my log where I can
All comments appreciated!
73
Dave
G3NKC
RM3O (from 1980)
Haven't seen too many comments on the new software; but many thanks to Paul
for working on this.
I haven't seen any problems at all in the upgrade; and the F2 key is now
doing what it should; so am a happy customer!
73
Dave
-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto
Try "Windows"; and select IOTA Mike !!!
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Mike Kirchoff
Sent: 08 November 2009 16:30
To: dx4win@mailman.qth.net
Subject: [Dx4win] IOTA Window in 8.02 and default Logboo
This operation should, and was previously automatic; it is not a repeat QSL!
Has anyone else spotted this; has it been reported yet ?
73
Dave Sharred
G3NKC
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4
You could open those QSO's, and check what country they are assigned to.
K5D might be USA (not Desecheo); 3Y0X could be Peter 1 or Bouvet; I would
have hoped that HV0A was mapped correctly. My copy picked up HV0A correctly
for DXCC.
You may need to map these to their respective country.
73
Dav
HI Scott; you are 100% with this; I also noticed this again today; following
Jim's FB account of the report behaviour
I would expect it to mimic QSL required status for the award
Incidentally, the other problem I commented on with the disappearing sr/ss
window - solved. The window was in the same
m trying to watch as often as I can so that I know how to replicate it !!
73
Dave
G3NKC
-Original Message-
From: jjreis...@gmail.com [mailto:jjreis...@gmail.com]on Behalf Of Jim
Reisert AD1C
Sent: 02 October 2009 21:40
To: Dave Sharred
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] 8.02 issues
Hi
Maybe I've picked up on a couple of issues, now that I am getting up to
speed with V8 !
1) For some reason, the sunrise / sunset window has been seen to disappear
on start up. I usually have this displayed as a matter of choice; when
DX4WIN starts, it is there, but after a log upload, it go
I never saw it written that the CFG files were compatible?! I never saw
advice to move the old CFG file into the new file area.
You shouldn't need top copy over your preferences; the advice on Jim's page
(WWW.ad1c.com) says to open up your old installation, and go into
preferences (File/Preferenc
I just tried this; and think that there is a small error in the IK3QAR line;
plus in the implementation.
In my mind; the callsign look up address should have:
http://www.qrz.com/db/ ; and the QSL Manager lookup address should have
http://www.ik3qar.it/manager/man_result.php?call=(the video d
True to my word, I committed this week to v8.02; coupled with a little bit
more free time to look at it.
- Paul did Very quick job to turn around the license keys; many thanks Paul
- Followed the instructions to the letter on Jim AD1C's page; and can report
no problems to migrate upwards - many t
Roger,
Since I have been there and done that, the following might help even more:
If you are connecting to the cluster with just DX4WIN, and I imagine that
your preferred cluster now is via G7VJR's; then you need to add the line
"cluster.cdxc.org.uk:7300" to the DX4WIN.TCP file. Then you should
Hi Guys
A very real question now :-
I didn't jump in a couple of weeks ago and purchase a new license for
DX4WIN, due to other radio jobs I needed to conclude; but have the gist of
the issues found.
Would the best advice be to jump in now, or wait a while, if some of the bug
fixes are imminent
Not a user yet Steve of this version, but I kept the note from K8UT on
Tuesday :
"I downloaded and installed DX4W801 and encountered an error message upon
launching the program:"
"The application failed to initialize properly (Oxc0150002). Click OK to
terminate the application"
"Most users will no
One workaround could be to integrate the VE7CC module into DX4Win ?
I imagine the same way that you call up Buckmaster or whatever - fire up an
executable that is VE7CC ?? Just automate the workaround !
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win
with my PC before I want to operate!
73
Dave
G3NKC
-Original Message-
From: Mel [mailto:ve...@videotron.ca]
Sent: 08 August 2009 20:08
To: Erkki Heikkinen
Cc: 'N8NN'; 'Dave Sharred'; 'Jim Reisert AD1C'; 'Dennis Petrich';
'DX4WIN'
Subject
Hi Dennis, Jim & all;
I raised this point a while ago (again!!); and am happily hooked up top AR
Cluster, which I have configured to my home node.
I still think that this is too many key strokes and ops; and my opinion is
still that it should be automated, just like running Win Test. Here; once
Very sorry - found it in "configuration" "user info"" !!!
FB !
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Dave Sharred
Sent: 25 June 2009 22:05
To: Jim Reisert AD1C
Cc: DX4WIN R
Hi Jim / all
I have installed the VE7CC software; and got the thing working fine , and
importing into DX4Win. Show promise so far; but a couple of points for
clarification:
In DX4WIN.TCP. I have the line "cluster.cdxc.org.uk:7300" added - for
G7VJR's FB clublog // CDXC cluster access )
I ha
Hi Jim / Paul
I like what I see; these look like some good improvements to make. Band map
is a great feature to have ! Only yesterday; we were hearing that WT also
has been updated; so my contesting and logging suite look like some big
changes !
I understand that we do not want to start a new wi
HI Lou
Someone pointed out a while ago on a different point, that in File
Preferences Screen tab,
there is a check box
"Leave all windows in original position"
I think this may help you ?
73
Dave
G3NKC
-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...
David
I use all 3 items that you mentioned; to be honest I never thought about it
at all !!! I don't tend to worry about it. I am not sure if LOTW confirmed
is an ADIF defined field ???
In DX4WIN, you will see that in File Preferences and the QSO tab, you can
select "Card in Hand" to "card o
In my opinion, I am not sure why Bill would want to create a group per
contest - unless it is to make a personalised message on his QSL card,
referring to the contest ?
I thought that contest logging programmes allowed such stuff to be recorded
in the "notes for this QSO " field ?
73
Dave
G3NKC
To Paul, Guy Dick etc...
Like Guy said, I have only experienced the DEMO mode when I have double
clicked on the desktop item; on a slow PC. for those that have seen this
problem - ask yourselves - is your PC slow to open up ?
Actually - it's a treble click - once to select desktop item, 2nd to o
Hi Roger
Of course I know which logs you are referring to.
If you are thinking up uploading them, I think anyway you will need to split
the log up:
- You will need to filter by group name, and save the result for uploading
- If the files are still too big, maybe you should then filter each log
And Cort, this was my reply to Steve:
"I must have bought it over 2 years ago now Steve; and am in the main very
happy with it.
I chose it as a Bluetooth device; I realised that 27MHz was not going to
work; a lot of products (then) never stated the frequency, and just said
Wireless. I checked the
t; no work for Paul to do !!!
73
Dave
G3NKC
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jim
Reisert AD1C
Sent: 08 December 2008 21:41
To: Dave Sharred
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Version 7.06
On Mon, Dec 8, 2008 at 1:3
Hi Paul
Thanks for the recent update; I have successfully completed this, as you may
have seen. I really appreciate your continued support of this product, as I
am sure many others do.
I may have missed the link, I thought there was a list to reported faults,
but could not find it. There is one i
To whoever claimed a different QSO count when installing the new upgrade - I
just performed it, following Jim's application notes, and had no problems
(follow www.ad1c.com )
73
Dave
G3NKC
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.
Guy
Kostas was not asking about support for the Ten Tec Omni; rather that DX4WIN
uses some software called "OMNIRIG" to do universal rig control; as a
loadable software module ?
I understood his question to be referring to many weaknesses of DX4WIN and
rig control ?
I hope I did understand this
Jim / Don;
I use group names a lot on my QSL's (my call with variants; MD4K etc etc...)
Still using 7.03.16;
but if I look at my preferences (cut 'n pasted) it is
"@@ 73 de %%"
The @@ gives either Pse QSl or Tnx QSL (depending on status) ; the %% would
give me either G3NKC, G3NKC/P, GQ3NKC, G
Think Kostas said all the you can try Andy.
That usually happens to me if I accidentally open WT twice (typically, you
open it once; Windows is slow to open; so you try again..)
73
Dave
G3NKC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andy Hewitt
Ted
You presumably have moved your 239 records already to submitted ?
You can see this in your DXCC summary.
When you know they have been credited; I would move all to Checked in 1 go :
REPORTS // Change Award Flags // whichever DXCC you are interested in
// Submitted > Checked.
Then, run
John
It's curious that you mention lock up associated with running QRZ.com...
I never have had lock up with DX4WIN, and I don't run QRZ.com (though
thought maybe I ought to)
However; I have noticed when I fire up QRZ.COM in recent times; it often
locks up Explorer (stuck on something called
Hi Bob
Politely, your email isn't making too much sense.
Have you submitted QSL's to ARRL; and had them accepted for an award (your
100 DXCC you mention) ??
If so, in DX4WIN; have a look in "Reports" "DXCC" "Summary" select all
bands / modes l what do you see ?? Do you see your 100 countries
L PROTECTED]
Sent: 16 February 2008 17:35
To: Dave Sharred
Subject: Re: [Dx4win] Multiple QSOs change on QSO NOTES - Group Numbers
Dave,
I have more than 30 groups, operations from several dxcc countries and
multiple callsigns from within TF all in the same log file (TF4M.DXL).
When filtering
?
Using DX4WIN V7.03.016
I may not be available today to comment further; go a busy day; but if I get
chance I will act on any advice.
73 es HNY; especially to Jim for all of his help !
Dave Sharred
G3NKC
ember 2007 13:00
To: Dave Sharred; dx4win@mailman.qth.net
Subject: Re: [Dx4win] Saint Barthelemy Info
Hello Dave, and the Reflector...
> That's strange.
>
> As reported earlier, I could create the new country; but I cannot enter
> the end date for FJ in the FS mapping field - wh
That's strange.
As reported earlier, I could create the new country; but I cannot enter the
end date for FJ in the FS mapping field - when I press the "UPDATE" command
in the "COUNTRY " window, it returns an error "Command not executed!
Switching to correct page"; and reverts to the FS "Details" t
Well , there is something weird going on. I had a job making the new country
stick; then when I did; I had a country total of 342 !!!
Seems like when you add a new country; it defaults to a new prefix of
(I think it was). The main file then ended up with 4 countries of .
I deleted them.
HI
In the Window / Logbook view, I seem to have corrupted the settings - I
have lost all of the default ones that you see when you select the report
editor.
I could reconstruct them, but I could copy them over / import them if poss.
from my 2nd PC. Does anyone know how to do this ?
73
Dave
G
I know that this is an old thread; I have trawled my emails and don't have
the answer though !
In May, Jim, AD1C replied to a note from Tony Lord concerning some
DX4WIN/LOTW shortfalls. I show it for completeness before I describe what I
am trying to do.
===
Hi Dick;
find the log file in the DX4Win directory; just copy it to a memory stick;
and put it in the lap top; under the same directory
73 Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dick White
Sent: 03 September 2007 19:30
To: DX4WIN Reflector Pos
Thanks again to Jim for updating this. I will put it on my PC later
I only started using Telnet recently; and have a question.
When I open the Packet window, can I make it default to my preferred node,
or do I have to select one every time ?
I still use DX4Win 6.04
73
Dave
G3NKC
-Origin
Hi John
I regularly print such numbers; have to say I can't find anything though in
Preferences or Labels that changes the order; though I may have seen it
before !
Why don't you set up a print , and in the Print Preview window, see if they
in fact are alphabetic ??
BTW - For such a quantity, I
With ease.
>From the logbook, perform a search (F8); and specify the start date.
You will be asked for the end date also, so now you have a valid selection.
Then, you could either save the selection as a new DX4Win log, or do File //
Export to ADIF
73
Dave
G3NKC
-Original Message-
F
1 - 100 of 128 matches
Mail list logo
