operation and with an RRC device for remote operation.
I use one switch for my headphones and another for my microphone. I would
have a third switch for my paddle, however, I had previously made a toggle
switch box for that purpose.
73,
Mike K2MK
Doug Hensley wrote
> I have two radios and
level drop.
73,
Mike K2MK
Roger D Johnson wrote
> I noticed that during the contest, that if I selected 50 or 100 Hz
> selectivity,
> the audio would drop way down. It didn't used to be this way. I tried
> reloading
> an earlier version of the software but couldn't figur
of illustrating
how to use it. If you are not a member it would probably be a good idea to
join.
https://groups.yahoo.com/neo/groups/SteppIR/info
You can also e-mail me directly and I can send you the PDFs.
k2mk dot mike at gmail dot com
73,
Mike K2MK
The Wizard wrote
> Ok, guys, I will be getting a ne
Hi Dave,
Yes this is the place and that's a great idea. It's called ballistic tuning.
I think it ultimately became the feature that makes the RIT dial a rapid
tuning dial. Check out the 2009 e-mail from Wayne that I pasted below. Maybe
Wayne will update his earlier comment.
73,
Mike K2MK
ge and dis-engage the mast into the MRB40 unit.
With two people it's a very simple job. All of my experiences were good and
given the opportunity I would not hesitate to purchase another one.
I have a personal website with lots of photos. Contact me directly if you
want the link.
k2mk at comcast dot net
umber is VA2265smh. The
ASUS is model number VS228H-P.
With two large monitors on a desk it's also worth considering adjustable
monitor support arms. They let you situate the monitors for best viewing
heights and angles without taking up valuable desk surface for your
equipment.
73,
Mike K2MK
Doug Hensley
Hi Fred,
The bottom right button has two functions. If you press the button you get
the menu. If you hold the button the screen expands to a full view less the
function key labels. You must have accidentally held the button too long.
Hold it again and the F-key labels should reappear.
73,
Mike
The PR6 has been sold.
73,
Mike K2MK
Mike K2MK wrote
> I have my own personal PR6 for sale. It includes the two male to male BNC
> adapters, the 12 volt power cable that plugs into the K3, the 15 pin
> accessory plug that plugs into the K3 accessory socket, and the
> instruction
to a no-antennas-allowed neighborhood.
Price is $55 and I will ship for free within the contiguous 48 states. A
little extra for KL7 and KH6. Unfortunately I am not prepared to ship to
foreign locations.
Write to me directly at:
k2mk at comcast dot net
73,
Mike K2MK
--
View this message
.
Please contact me off list at:
k2mk at comcast dot net
I'm not checking the reflector daily so please don't post questions or
offers here.
73,
Mike K2MK
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-receive-antenna-splitter-for-K3-with-Sub-RX-tp7616088.html
Sent
Hi Mike,
I had the P3 on top for several years. I also had the front bale raised on
the K3. I used a piece of non-adhesive shelf liner to keep the P3 from
sliding around. I cut out the shelf liner around the K3 speaker openings.
Absolutely no problem with sliding or K3 ventilation.
73,
Mike K2MK
Hi Norm,
Still down here as well as of Thursday morning.
73,
Mike K2MK
tomb18 wrote
> Hi,
> Normally I see my posts but today it’s been several hours and it seems
> perhaps the [DEV] mailing list is down?
> Thanks
--
View this message in context:
http://elecraft.365791.n
. If it occurs then
it is the SteppIR EHU and not your amplifier relay.
73,
Mike K2MK
rlindzen wrote
> I'm having a problem with my K3 (with 2 receivers and a P3). While
> listening for a few minutes, signals drop about 6 s-units. Original
> strength returns when I push the PTT, but the dro
Hi Gary,
I don't know if it's right or wrong to do it the way you described. I chose
to purchase a 2 port splitter from DX Engineering. Their part number is
DXE-RSC-2. I suppose there are cheaper alternatives.
http://www.dxengineering.com/parts/dxe-rsc-2
73,
Mike K2MK
Gary Smith-2 wrote
>
. If local, please arrange a visit
for a full demo on all bands. PayPal or bank check only. Continental US
only. Licensed hams on QRZ.com only.
Please don't reply on the reflector. Contact me direct via e-mail.
k2mk at comcast dot net
73,
Mike K2MK
--
View this message in context:
http
The KPA500 has been sold.
73,
Mike K2MK
Mike K2MK wrote
> I am selling my less than 2 year old KPA500 with the auxiliary cable kit
> and a W6ON gray wool dust cover. Serial number 2015.
>
> Bought new on 4/29/14 as a kit and assembled by me. It works beautifully
> and is in pe
Hi Jim,
Mine does. Are you seeing your K3 frequency on the P3 display?
73,
Mike K2MK
Jim AB3CV wrote
> It would be nice if the P3 would remember the Span setting on a per band
> basis.
>
> Have I missed a setting?
>
> jim ab3cv
--
View this message in context:
http://
in test mode. There are also tutorial video links available on their
website.
73,
Mike K2MK
Gary Smith-2 wrote
> When I contest I use N1MM, use the memories on the K3 and send with
> the key when needed & I'm busy as a one arm paper hanger doing it
> this way. I'd like to just use
Hi Robert,
If you are using VOX there should be no difference in the delay between
using your paddle and using your PC. It sounds like N1MM is still sending a
PTT command over the serial link. You can prove this by changing
CONFIG:PTT-KEY to OFF-OFF on your K3.
73,
Mike K2MK
s57aw wrote
>
. But your K3 or your
N1MM configuration may have a different reaction that is causing a frequency
change.
73,
Mike K2MK
Ignacy wrote
> Generally K3 worked very well. But I would like to report some problems.
> This is with N1MM+
>
> I interrupt a transmission with ESC. Periodically, I
. And the help
feature really goes into detail about how to use the K3 memory features.
http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm
73,
Mike K2MK
charles-2 wrote
> Just got my K3S yesterday and spent most of the night setting up the
> menu and config selections. On P
Hi David,
Not needed. Leave it OFF.
73,
Mike K2MK
David Winarsky wrote
> Hi,
>
> Long time reader, first time poster here. I really enjoy this list and
> have found countless solutions here. I'm new to the full k-line I've read
> through both manuals and previous posts, but ha
for CW, the M2
button set for AFSK, the M3 button for SSB, and the M4 button for Data A.
Here's the link:
http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm
73,
Mike K2MK
Howard Sherer wrote
> I know that I can store data as a mode in a memory but when I recall it,
> som
y P3 in Ref Lvl mode. If I press
Center twice it takes me out of Ref Lvl mode. By pressing F4 twice as I
described above the P3 stays in Ref Lvl mode.
73,
Mike K2MK
Augie Gus Hansen wrote
> Press CENTER a second time without any intervening action.
>
> On 11/18/2015 7:29 AM, Bill
-B knob on
the K3. If you also want to use the A and B markers they will follow the
select knob on the P3.
73,
Mike K2MK
Mike Reublin NF4L wrote
> Span is set at 10. When chasing DX split, is it possible to position the
> VFO A cursor at the left edge of the display and have the right
and set the CONFIG:TXGN
number for that band to a lower number. Remember to turn CONFIG:TX ALC back
on after changing the number. Retest.
73,
Mike K2MK
gi4doh wrote
> With my K3/KPA500/KAT500 combo I occasionally get a soft or hard alarm on
> the KPA500 due to the K3 briefly giving a high
of the four M buttons for band
segments. For example I have M1 set up for the CW portion of the band, M2
for RTTY, M3 for SSB. Again just press M-V then the M button.
And finally, when using a contest or logging program it's very easy to just
type in a frequency on your PC and press enter.
73,
Mike K2MK
Hi Peter,
I bought the Astron RS-35M for my $4000 K3 in 2008. I've never turned it off
and I've never even given it a second thought. No fan, no RF noise, just
reliable DC.
73,
Mike K2MK
Peter Pauly wrote
> I'm looking at the Meanwell power supplies because they are cheap and s
Hi Paul,
I'm pretty sure that the "tiring" issue with the K3 was put to bed with the
DSP upgrade with low pass filtering (K3DSPUPGD) in 2010.
73,
Mike K2MK
Elecraft mailing list wrote
> I was wondering if and when a full-on review of the K3S would be
> forthcoming. I'm
accidentally put the K3 into Diversity mode.
In diversity the Sub RX filters are always the same as the Main RX filters.
A quick test is to press BSET and then press XFIL. If the word "=MAIN"
appears in the lower display then you are in diversity.
73,
Mike K2MK
Elliott Lawrence-5 wro
Hi Elliott,
Here's a long-shot. Take a look at your filter selection for your SUB RX
using the K3 Utility program. Maybe you only have one filter enabled for
DATA mode.
73,
Mike K2MK
Elliott Lawrence-5 wrote
> Changing to MCU 5.38 did not solve the problem. Need to contact K3
> support
roofing filter is the next wider one. I say generally because it is possible
to set wider cutoff points for the roofing filters.
73,
Mike K2MK
ae4pb wrote
> I normally wear a headset but when working I like to listen to code to
> help
> build my proficiency and am hearing a lot of distor
as your Main RX. If
the work AUX comes up then just long hold the RX ANT button and you'll see
the work MAIN come up.
73,
Mike K2MK
Byron Peebles wrote
> It's unclear to me what the setting for KRX3 should be.
>
> 1. I do have the KRX3A installed.
> 2. I do NOT have an antenna on
and below. It's
loudest when changing from 150 to 100.
Having said that, it's faint to the point that I can't be sure if it was
there before the SYN changeover or not. It certainly doesn't bother me even
with high audio levels.
73,
Mike K2MK
Jim Bolit wrote
> I just got my K3 back from Elecr
website. From there you can jump on a user
forum and also download their manual.
http://www.remoterig.com/wp/
73,
Mike K2MK
Bill Gaines wrote
> I inherited a K3 and the K3/0 mini. Did the K3/0 mini come with a manual
> and instructions on how to interface the two together over the internet? I
of the last
QSO. A clear frequency can be a better choice.
73,
Mike K2MK
dyarnes-2 wrote
> Hi All,
>
> I just worked V73D, but not sure how I would have done it without using
> the
> 2nd RX. I love my P3, but for DX stuff the 2nd RX always seems to be the
> difference.
if I'm the only guy not receiving postings through e-mail.
73,
Mike K2MK
Scott Manthe-2 wrote
> It might be something with your client, Mike. I guess is could also be a
> Windows security "feature." Email addresses are not truncated here with
> Thunderbird and OSX. The rest
,
Mike K2MK
Hi Jim,
Drop brandon@ an email with your K3/0, Remoterig and remotehams.com
questions. He is responsible for supporting these products, and he also
happens to be the author of remonthams.com
73,
Eric
elecraft.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com
notes on
their Y cable. From there you can get your thoughts together and ask further
questions as required. I posted the document on the SteppIR Yahoo group in
the files section.
https://groups.yahoo.com/neo/groups/SteppIR/files
73,
Mike K2MK
David Ahrendts wrote
> Quick help on connect
Hi Earl,
Be sure to set.
CONFIG:KRX3.ANT=BNC
73,
Mike K2MK
efortner wrote
> Hi Lee,
>
> I finished putting my k3s together last week and with help from Howard at
> the Elecraft discovered most of my problems were coming from a bad tcxo. I
> also have the sub receiver
a magenta and a red arrow (if your transmit
frequency is offset) or just a magenta arrow.
All of this applies whether you have a SUB RX or not.
73,
Mike K2MK
a...@juno.com wrote
> From the P3 manual"
> "VFO A has a green cursor and VFO B has a magenta cursor unless split mod
of the screen.
No if you are using Fixed-Tune mode. You cannot get VFO-A off of the screen.
73,
Mike K2MK
Gary K9GS wrote
> Hello all,
>
> I am relatively new to owning a P3 / SVGA combo and have done some
> searching and wonder if the following way of operating is possible?
>
>
allows the amplifier operation to be inhibited (won’t amplify) when
a logic low is
applied to pin 11 of the AUX Connector (see pg 26). When amplification is
inhibited, an
underscore instead of the asterisk appears on the left end of the LCD
display./
73,
Mike K2MK
Mike VE3YF wrote
> Hi:
>
&g
filters. I
also have all of them checked for CW.
73,
Mike K2MK
James Hall-2 wrote
> Working with my newly constructed K3S today, I noticed that receiving
> through the FL4 crystal filter (400 hz, 8-pole) was noticeably suppressed.
> Through the FL3 (1.8 kHz) filter, an RTTY signal woul
of 10db.
To solve this problem keep the RXEQ set to 0 db for the frequencies of
interest and use negative db settings for the frequencies of no interest.
73,
Mike K2MK
Keith Onishi wrote
> One of my friend K3 users report that AF output level with 100Hz passband
> width is lower than with
Hi Tyler,
I wonder if they are selling the Phonema brand product. The pricing closely
matches.
http://phonemaspeakers.com/altavoces/ksp3.html
73,
Mike K2MK
Elecraft mailing list wrote
> Hi All,
> I see there is now an SP3 External Speaker option available for the K3S
> (see the o
revisions ago so this might not still be
true.
73,
Mike K2MK
pastormg wrote
Good Evening,
I have been tinkering around with the RX EQ #'s for CW. Would anyone have
any good settings to recommend?
Mark Griffin, KB3Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com
Hi Jerry,
That's an interesting question. You can vary the volume of each receiver but
the settings you make in RX EQ apply to both receivers.
73,
Mike K2MK
ae4pb wrote
Reading the manual I see there's an audio equalizer feature to tune the
audio to our liking. Is it possible when using
I might have to re-evaluate. For casual split chasing the P3 can still be
awesome. And the P3 is just so cool for general use. If I were funds limited
I would definitely buy a P3 and save up for the sub RX. Having both is the
greatest thing since sliced bread.
73,
Mike K2MK
ae4pb wrote
I like
time you turn on your radio. In
fact, you will feel naked without it. If you get the Sub RX you will have it
turned off most of the time.
73,
Mike K2MK
ae4pb wrote
Just wondering what DXers who have the K3/K3s think. My main mode will be
CW
with my objective being DX primarily. With this in mind
Menu, Cursors, knob press
What you are probably experiencing is that when you first press the menu
button the first thing to come up is FW Rev. You have to turn the knob
counter clockwise before you see Cursors.
73,
Mike K2MK
N5GE wrote
The K3S is great! , but now I'm having trouble setting
Hi Don,
That seems like a good idea, however, it doesn't behave as you would think.
Yes SWH42; turns on the pitch function and the actual pitch is displayed in
VFO-A. But once that occurs the UP; or DN; function don't actually change
the number displayed in VFO-A.
73,
Mike K2MK
Mike,
SWH42
I was trying to use the CW sidetone pitch command in a macro but it is a GET
only command. It does not function as a SET command. I was wondering if
there is a work-around.
CWxx; where xx is 30-80 (sidetone pitch in 10 Hz units)
73,
Mike K2MK
--
View this message in context:
http://elecraft
manual for offset and found on page 79
that it states that all 8 pole filters have zero offset. A note to this
effect should have probably been added to page 46.
73,
Mike K2MK
I purchased a 400Hz 8 pole (Inrad) filter and installed it in my K3
yesterday.
There were no markings on the box and some
direct e-mail at
k2mk at comcast dot net
73,
Mike K2MK
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-FS-KFL3A-1-0K-filter-8-pole-tp7604881.html
Sent from the Elecraft mailing list archive at Nabble.com
than
eBay since Amazon will take it back if it doesn't work for you.
http://www.amazon.com/C2G-Cables-03364-2-Port-Manual/dp/BAQR8F/ref=sr_1_2?ie=UTF8qid=1435925432sr=8-2keywords=svga+switch+box
73,
Mike K2MK
Ray Benny wrote
I'm looking to switch my second monitor between two output sources
/
73,
Mike K2MK
Michael Babineau-2 wrote
When did the International USPS shipping rates go out the roof ???
I just ordered a noise blanker for my K2 (~$USD60 ) and the cheapest
shipping to Canada via USPS came up as $USD38 !
Yikes … that almost doubles the cost ! I don’t remember
Hi Larry,
Probably a pin 11 problem in the accessory cable leading to the KPA500.
Search the archive for pin 11 problem.
This comes up frequently enough that Elecraft should document it in the
KPA500 manual and the PR6 and PR6-10 instructions.
73,
Mike K2MK
Larry Snyder wrote
I ordered
Hi Carl,
Four bars solid and the 5th bar flickering is the correct way to do it.
73,
Mike K2MK
Carl Jón Denbow wrote
I have ALC set so that I get four bars, with the fourth bar solid most
of the time but flickering every now and then. Is that the right
amount, or should it be four solid
on the
applicable band. Other bands will only show OFF/PRE1.
When PRE2 is selected, the PRE icon flashes slowly as a reminder.
73,
Wayne
N6KR
73,
Mike K2MK
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-KXV3B-in-an-Older-K3-tp7603673p7603674.html
Sent from
when you change bands.
73,
Mike K2MK
Peter W2IRT wrote
Hello all,
Waiting on my K3s, which will be my first-ever Elecraft product. I'm going
through as much documentation as I can but I have a couple of questions at
the moment that I'm not seeing any reference to online. I have ordered
the inexpensive Netgear WN3000RP. There are faster and slower versions
available as well.
73,
Mike K2MK
Elecraft mailing list wrote
This is probably a silly question, but here goes. In reading the sales
material for the new Flex Maestro, I was intrigued by the idea of
operating over a wireless LAN
as
well as the main RX in the program?
73,
Mike K2MK
Mike VE3YF wrote
Hi:
For some reason every time I engage the Sub Receiver it defaults to
CW. For example I have set it up on 80m to be in LSB via BSET and
saved it, and yet it will stay
in LSB for awhile, and at some point in time
cover and listen to the birdie while you move the various coax cables
inside the K3 around. If you find a position that eliminates the noise, tape
the cable in place with some painters tape.
73,
Mike K2MK
k1tl wrote
Hi all,
I have been having a problem with a 6m internal birdie around 50.096
.
With that caveat in mind if you want a copy just e-mail me directly and I'll
send the zip file to you.
k2mk at comcast dot net
73,
Mike K2MK
Jim KS7S wrote
I can't seem to find the latest beta firmware for the P3 - I downloaded
the
1.21/1.34 version (NB on SVGA) but didn't download the 1.22
to the 10Hz resolution of the master controller.
73,
Mike K2MK
Rick Tavan N6XI wrote
Thanks, Don. That's what I thought.
Cycling AUTOINF Off, then On got it working again. But after that it kept
cycling between 14.000 and 14.050 as if the K3 were sending bogus IF;
messages. It did this several
.html
73,
Mike K2MK
Nick-VE3EY wrote
partial quote
By looking at parts list from P3 manual, perhaps we
can significantly shrink the depth of the unit by making the Top, Bottom
and Side panels (E100362, E100363, and E100361) shorter if Elecraft would
be willing to manufacture and provide
Hi Ted,
Do an archive search for the string:
SVGA ribbon cable
Review the posts and see if they bear any similarity to what you are now
experiencing. I think the gist of the thread was that placement of the
ribbon cable could be the cause of spurious spikes.
73,
Mike K2MK
Dauer, Edward
.
73,
Mike K2MK
Bud Governale, W3LL wrote
Has a non Beta firmware update been released which minimizes the time for
the SVGA display to unfreeze between CQ’s during a contest?
This made it difficult to find/observe a clear channel in the waterfall
between CQ’s or contacts.
73,
Bud W3LL
. This may be
4 hours for some users and 4 months for others. After that you rarely ever
have to refer to the printed manual. However, it's a good idea to keep the
latest PDF version of the manual on your PC. This is very handy since you
can search for words.
73,
Mike K2MK
Mike Zbrozek wrote
partial
Hi Ted,
I'm very happy with 420 Hz.
73,
Mike K2MK
I like to use the CWT function when operating CW and then the Spot button
to zero-beat.
I have been using 700 Hz as the pitch but would like to hear a lower
frequency audio tone for my own preference.
What is the mind of the Reflector
the full pileup
you may have to increase the frequency SPAN of the display. Just press the
SPAN button and twist the P3 knob clockwise.
If the DX station is listening DOWN then you'll move the VFO-A cursor to the
right side of the screen by twisting the knob counterclockwise.
73,
Mike K2MK
are
concentrating on the audio and studying our P3 and computer monitor(s). We
might be turning the VFO-B knob but we're not necessarily looking at the
radio. So when we hear UP we don't even realize that we are the offender.
73,
Mike K2MK
wb6rse1 wrote
THE simplest solution is for the op to just simply pay
Hi Mike,
I don't have Beta 5r10 so I'm a little confused by the comments in your post
and the subsequent posts. I use Dual PB all of the time for RTTY. Is it
still fully functional in RTTY?
73,
Mike K2MK
Mike Harris-9 wrote
G'day,
Just installed Beta 5r10. What a dreadful shame
that if the firmware fixed
this communication issue that it would have been a 100% fix unless there was
a second reason for freezing.
73,
Mike K2MK
Carl Clawson-3 wrote
One observation:
I too have found the newest firmware to be much better. But I had it
freeze
once and it didn't seem like it was ever
Tune mode
rather Tracking mode.
73,
Mike K2MK
Tighe Kuykendall wrote
Just noticed something odd with the latest P3 SVGA code (1.35/1.22).
Am split on 80m. Held the P3 button for Center and rotated the knob
so VFO A was closer to the left side of the screen then tapped the
button again
in Mike's loss of REF LVL data?
73,
Mike K2MK
Michael Eberle wrote
Yes, I noticed the Step Span on mine seemed to reset after a power
cycle. It also appears to be set on a per band basis. Is there is a
way to set the REF LVL on a per band basis as well?
Mike
KI0HA
On 2/2/2015 04:31
will it last. Is it
10,000 cycles? Is it a million cycles? I always switch the Pixel off on the
higher frequency bands for the sole purpose of extending the life of the
relay.
73,
Mike K2MK
James Bennett wrote
Hi all,
Have a K3/P3/KPA500/KAT500 and have been working 160 meters more the past
suppose
there is some way to check this out.
73,
Mike K2MK
Barry Simpson wrote
.partial quote from Barry..
The conclusion is therefore that from an initial OK position in Stby and
Oper as soon as the first character is keyed, the solid state switch in
the
TS590SG hangs
antenna.
The company has changed names and the old links for the antenna don't seem
to work anymore. This link seems ok.
https://inlogisinc.com/products/amateurham-radio-antennas/ham-amateur-radio-antennas
73,
Mike K2MK
Paul Barlow-2 wrote
Dear Elecrafters,
I have a very small and odd shaped
device in addition to
the KPA500?
73,
Mike K2MK
Barry Simpson wrote
My KPA500 has just developed an issue. Specifically when I switch it from
Stby to Oper, the level of received signals drops by around 5 or 6 s
points. It still transmits fine and there are no adverse SWR indications
or
loose co
levels from 5 to 10. Is this type of noise not the type that can be cleaned
up with the P3 NB feature?
73,
Mike K2MK
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-NB-general-question-tp7597623.html
Sent from the Elecraft mailing list archive at Nabble.com
?autoview=SKUN=4294953330%2B4294951218sortby=Defaultsortorder=Ascending
http://www.arraysolutions.com/Products/as_rxfep.htm
73,
Mike K2MK
Elecraft mailing list wrote
I ordered the sub receiver and in the conversation with Elecraft I was
informed that it is good idea to build a device that would short
dissappeared when
I manually advanced the speed to 3 or higher. The replacement I received was
the identical model and it solved the problem.
73,
Mike K2MK
Joe Word-2 wrote
Has anyone replaced the fan in the KPA500 with a quieter one? If so, could
I get the model number? You can contact me off-list
Hi Bill,
Is it possible that the K3 built-in antenna tuner is in the active position
on 160 meters only. This could account for the problem and might still show
a 1:1 SWR into a dummy load.
73,
Mike K2MK
Elecraft mailing list wrote
It seems I developed a high SWR between the K3 and the KPA500
push the knob.
Everybody develops their own techniques for using their P3. You will too
after you've played with it for a few weeks.
73,
Mike K2MK
Phil Anderson wrote
Recently added a P3 to my K3 station.niceyet questions:
1. Wonder why the spectrum display gets noisy when I tune VFO
Hi Gary,
You'll want to use the center frequency shift feature. Hold the Center
button on the P3 to activate the function and turn the P3 knob until the DX
station (VFO A) is wherever you want it to be. It works in Fixed Tune mode
or Tracking mode.
73,
Mike K2MK
Gary Smith-2 wrote
Since I
a feature refresher is just what the doctor ordered.
73,
Mike K2MK
David Cole wrote
Hi,
Not sure how many know this, but there is a way to preset your Filters
for Normalization...
See:
http://youtu.be/_1DnLQVaoYg
--
Thanks and 73's,
For equipment, and software setups and reviews see
paragraph gives
advice on changing the setting manually. Put the K3 on 40 meters, turn off
TX ALC and reduce TXGN slightly. Then turn on TX ALC and give it a try.
73,
Mike K2MK
--
View this message in context:
http://elecraft.365791.n2.nabble.com/adjusting-the-K3-to-not-over-drive-an-amplifier
time at the bottom of
the screen if desired.
73,
Mike K2MK
Hi Ted,
Already have two monitors. Just ordered a 27 to replace the 19. I will use
dual inputs -HDMI from the workstation and sub-D from the P3. Will switch
video inputs to play with the P3 SVGA. I want to see if I would really use
put the
problem on the list of problems to be resolved.
There have been posts from others experiencing hang-ups who don't have the
SVGA board. Hopefully the future fix that Elecraft produces will solve all
hang-up problems.
73,
Mike K2MK
Jim Rogers wrote
Well, I guess I will chime in as well
of the
monitor.
73,
Mike K2MK
N2TK wrote
I have the P3 with the SVGA board. But I do not have an external monitor.
The way I read the manual is that you need to hook up an external monitor
to
use a keyboard and to have the transmit and receive data windows. Is that
correct?
The reason I don't use
was operating as a W1AW/2 station working
RTTY split. I depended on the P3 to direct my focus to stations in the
clear. It repeatedly let me down.
73,
Mike K2MK
Vic Rosenthal 4X6GP/K2VCO wrote
I've seen this mentioned by others, but I don't think I've heard an
official response.
Sometimes the P3
the P3
hung up for about 1 second. Continuing I sent the letter K about 10 times
and the P3 hung on the 10th repeat for about 2 seconds.
This is a true problem. More of you should run this test.
73,
Mike K2MK
Vic Rosenthal 4X6GP/K2VCO wrote
Right, but I conclusively proved
rate on the P3 and it was set at 10ms which is per the
manual. I raised it to 20ms and the problem persists. I raised it 100ms and
the problem persists.
73,
Mike K2MK
Don Wilhelm-4 wrote
In addition, there is now QSK OLD and QSK NEW which now adds another
variable into the K3 'return to RX
Hi Carl,
It's a common mistake to believe that the more expensive Heil should sound
better than less expensive alternatives. I think you will be very pleasantly
surprised with on-air comparisons to the CM500.
73,
Mike K2MK
Carl Jón Denbow wrote
Dave, et al:
Thanks for all the fine comments
Hi John,
Are you sure your external speaker is plugged in to the speaker jack and not
the rear headphone jack?
73,
Mike K2MK
John McBee-2 wrote
Problem still exist, however I have discovered that if I turn on spkr+ph
to on, I have audio fine without headphones plugged in, but if I change
Hi Todd,
Of course Oliver is correct and I would like to add one comment. For the
W1AW/n operations be sure to lock VFO B. You don't want your transmit
frequency to change if you accidentally reach for and rotate the VFO B knob.
73,
Mike K2MK
Oliver Dröse wrote
Hi Todd,
simply switch
still feed audio from the K3 directly into the PC. I think there
is a minor problem with this particular audio adapter as it wants to be a
monaural microphone input device rather than a stereo line input device. But
there are many similar devices on Amazon to choose from.
73,
Mike K2MK
Chris
under
Windoz control. If you have the desk space you could add a third monitor
just for P3/SVGA use. Some station photos on QRZ.com show hams with 3 and 4
monitors.
73,
Mike K2MK
Phil Anderson wrote
Hey Guys,
Wondering about which software package to use with my new and now built
K3 Kit
1 - 100 of 432 matches
Mail list logo
