net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to f...@fmeco.com
--
Fred Moore
email:
Does anyone make an amplified speaker that closely matches the look and
size of the KX3 that sounds good. Any recommendations.. thanks in
advance.. Fred
--
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
I don't see a reference to setting the receive eq via a macro, I do see
a reference to setting the transmit eq. Surely I am missing
something.. info please.. thanks in advance.. Fred
--
Fred Moore
Ham: WD8KNI
Cell 321-217-8699
email: f...@fmeco.com
I have my options set to receive my own posts, but don't get them.. any
thoughts anyone.. Fred
--
Fred Moore
Ham: WD8KNI
Cell 321-217-8699
email: f...@fmeco.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
ne
> ...nr4c. bill
>
>
>> On May 21, 2016, at 10:40 AM, Fred Moore <wd8...@gmail.com> wrote:
>>
>> I don't see a reference to setting the receive eq via a macro, I do see
>> a reference to setting the transmit eq. Surely I am missing
>> something.. info
Thanks for the input, missed the part that RxEQ was stored by mode, that
solves my problem. I should have put KX3 in the subject, but works
same on k3 and kx3.. solved... thanks..
--
Fred Moore
Ham: WD8KNI
Cell 321-217-8699
email: f...@fmeco.com
__
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support
ailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message del
mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message deliver
qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to f...@fmeco.com
>
--
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
__
http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to f...@f
://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to f...@fmeco.com
>
>
> On Sep 14, 2016, at 14:39, Fred Moore <f...@fmeco.com
> <mailto:f...@fmeco.com>> wrote:
>
>> I am looking for recommendations on a good SDR application that will run
>> under Mac OSX. I also have parallels installed with a windows VM, but
>> don't wa
I am looking for recommendations on a good SDR application that will run
under Mac OSX. I also have parallels installed with a windows VM, but
don't want anything that runs under windows..
What are you Mac users using?.. Fred
--
Fred Moore
WD8KNI
email: f...@fmeco.com
phone: 321
; Michael Blake
> k9...@mac.com <mailto:k9...@icloud.com>
>
>
>
>
>
>
>> On Sep 14, 2016, at 3:04 PM, Fred Moore <f...@fmeco.com
>> <mailto:f...@fmeco.com>> wrote:
>>
>> I am aware it doesn't require any SDR software, but wanted to play
t hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to donw...@embarqmail.com
>>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth
Hate to reply to my own post.. but this issue is going on on MacBook Pro
(Retina 2010-2011) the fix is to reset the SMC controller.. (Shift,
CTRL, CMD + Power) hold down till the system resets.. everything seems
ok now.. hope this helps someone..
On 10/9/16 5:50 PM, Fred Moore wrote:
>
ng list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivere
Has anyone had any problem getting these programs to connect after
upgrading OSX to Sierra? I can't seem to get them to connect, upgraded
last week to sierra, and today was the first time I tried it..
Regards.. Fred
--
Fred Moore
WD8KNI
email: f...@fmeco.com
f...@safes.com
phone: 321
g list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered
.. no relationship to amazon.. but good speaker with a good
sale price
https://www.amazon.com/gp/product/B00QU4RPD0/ref=oh_aui_detailpage_o01_s00?ie=UTF8=1
regards.. Fred
--
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to f...@fmeco.com
>
--
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
__
Elecraft mailing list
Home: http
for the 5 mhz band. ..hyendfed can I use a quarter
> wave length of counter point as a radiator ground plane. ..
> The. ..G0MVP.
>
> mjis...@btinternet.com
>
>
> Sent from Samsung Mobile
>
>
> Original message
> From: Fred Moore
> Dat
a iPad
>
>> On Dec 29, 2016, at 9:30 AM, Fred Moore <f...@fmeco.com> wrote:
>>
>> With an end fed 1/4 wave you only need a counterpoise that is about .05
>> wave length. it can be the coax or another counterpoise. Although a
>> counterpoise has some effect
an S-unit, and it reduces your 5W signal to 1.25W. I
> wouldn't call that minimal or "not much."
>
> 73, Jim K9YC
>
> On Thu,12/29/2016 7:30 AM, Fred Moore wrote:
>> With an end fed 1/4 wave you only need a counterpoise that is about .05
>> wave length
.. Fred
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
On 3/28/17 8:04 PM, Keith Onishi wrote:
> I have been trying to set up for RTTY operation with KX3 + iMic + cocoaModem
> on Macbook Pro, but not successful.
> Mode selection on KX3 is AFSK A and cocoaMo
keep everyone filled in on the progress.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
Phone: (321) 217-8699
On 3/17/17 3:37 PM, John Saxon via Elecraft wrote:
> Off topic, but perhaps others have had the same problem.
> I have a K3/100 + ATU (ser#3542), purchased as
else works
properly.. ?
latest firmware KX3 and PX3
Regards.. Fred
--
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Thanks Fred, I have the book will look at it.. Fred
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
On 4/1/17 8:13 PM, Cady, Fred wrote:
>
> Have a look at the How to Set Up and Interpret the PX3 Display in the
> PX3 manual where this is explained (O
imply want to understand if
this is what others are seeing.. and make sure this new to me PX3 is
operating correctly..
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
On 4/1/17 8:13 PM, Cady, Fred wrote:
>
> Have a look at the How to Set Up and Interpret the PX3 Display in
I am also using the hardrock 50, works well have the internal atu as
well, I think the kit was 479 or something like that, took about 6 hours
to build, nice kit. works well, but don't hardly turn it on 5 watts CW
gets me where I want to go 100% of the time.. Fred
Fred Moore
email: f...@fmeco.com
it, but when both magnets were on the
top right hand corner, it was all over for the ATU.. makes 100% sense
now that I know what was happening... Regards.. Fred
Fred Moore
email: f...@fmeco.com
f...@safes.com
phone: 321-217-8699
On 4/19/17 11:55 PM, nate t wrote:
> Hi all,
>
>
far between, thanks mostly to what
our government is allowing to happen...
FWIW/WYP.. regards.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 8/13/17 8:43 AM, Bob McGraw K4TAX wrote:
> Forget about "what you've been told". Do your own r
won't
fix that one.
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
advertised in QST for 929 free freight
and sales tax to me here in Florida (no relationship). 150 bucks
cheaper than anywhere else I could find it.
Regards.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
will build one, no matter what the mechanism is.
Regards.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 6/30/17 1:55 PM, Jim Brown wrote:
> On 6/30/2017 6:19 AM, Fred Moore wrote:
>> I also have found no reason for any type of filter with Honda's..
>
alls it CW keying, no way it is
Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 7/2/17 10:32 AM, Dauer, Edward wrote:
> I wonder if this explains something I ran into during FD. On several
> occasions – usually late at night – I was able to do some ru
I find the simplest way is to just use a 9 dollar usb sound card dongle
to handle the input and output audio on my Macbook Pro. and use fldigi
and RumlogNG, along with other mode software to get everything done.
Works FB... Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321
the moral.. listen to faster code than you need, and put down the
pencil and paper.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 6/12/17 5:59 AM, Rick M0LEP wrote:
> I only allowed myself to buy my KX3 after I'd completed a number of CW
> QSOs. I stumb
econd is lightening protection, as it typically protects equipment.
equipment can be replaced
They don't carry the same weighting factor.. as very few worldwide are
killed from lightning vs improper safety grounds.
most likely the only thing we don't agree on.. everything else you seem
spot on... Regar
pens again.
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 6/10/17 4:36 PM, Jim Brown wrote:
> On Sat,6/10/2017 12:39 PM, Fred Moore wrote:
>> Jim, lets stop talking about grounds totally when dealing with RF, it's
>> just a confusion factor whe
ce it
goes there first before the KX3, The PX3 will not pass the bad baud rate
date to the KX2, I set all of my speeds to 38,400, RumlogNG, the PX3 and
the KX3..
hope this fixes your problem also..
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 10/10/17 1:50 AM, B
I thought a hurricane took mine down here in Florida early.. thanks for
letting us know what is going on, don't monitor this stuff as I should..
thanks.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 9/6/17 6:13 AM, dgb wrote:
>
>
> Haven't no
Thanks for specifying that this group is not related to the Elecraft
Company. That makes my decision about joining your group very easy for
me.
.. Fred
I'll only post this one time... That way I can make sure I observe the
Elecraft OT rules as well..
Fred Moore
email: f...@fmeco.com
Ron, you are 100% on the money.. I was thinking about how I wanted to
explain the same thing.. thanks.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 9/3/17 7:04 PM, Ron D'Eau Claire wrote:
> The advantage of controlling the gain manually is not an &
This is exactly why I do not work CW contests anymore. CW contests have
become a machine contest not a Ham contest... But some people will go to
any expense to make sure they are number one. Not interested in even
giving them a 1 point..
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
was logging with another keyboard. The other two were
there just in case someone got tired of typing.. All at the same time
they were telling jokes and drinking coffee.
I'm out of here says I, I still work FD, but refuse to work a CW
contest, yes 30 meters is your friend on contest weekends
Fred Moore
Bill, I am currently on High Sierra, RumlogNG is still operating just
fine on my KX3 I have not checked the utilities for the for the KX3, I
don't have a K3, the drivers don't know if this information helps or
not, drivers might be different...
Regards.. Fred
Fred Moore
email: f...@fmeco.com
in the future... I bow to your cow dung, and those who you
know, who most likely sit in the dung you fling.
My last comment on the subject..
Regards.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
phone: 321-217-8699
On 11/28/17 1:48 PM, Jim Brown wrote:
> You're the loser on that
the whole log gets tossed and their name published as a
cheat.. There should also be people who only call CQTEST and never
answer a call, if there call shows that log is also tossed.
I have not use for CW decoded qso's as a learning tool or otherwise..
off my soapbox
Fred Moore
email: f
50 matches
Mail list logo
