SoloCDM wrote:
If you know of a mailing list for StarOffice, would you send me the
URL?
Send an email with Subject: 'subscribe' to
[EMAIL PROTECTED]
Note: When you reply to this message, please include
the mailing list and my email address.
No. Declined.
--
Regards,
Ron. [AU]
Hello,
I am running LM 7.2 with almost everything installed from GPL version and I get
in my logs this message about missing char-major-4. Can anybody tell what this
module is supposed to do and which service is trying to access it ?
TIA.
Keep in touch with http://mandrakeforum.com:
hello:
I just installed LM72 on one of my friends computer, and I just ran in to a
problem with the soundcard: Soundblaster PCI128.
The sound is distorted, My friend is a DJ so there is no chance he can live with
that, so how do I fix that?
Joergen
Keep in touch with
hi,
how do i configure an isdn-internet-gateway?
i installed an avm-fritz-pci and want to use both isdn-channels.
gruesse/regards
andreas krahn
--
akotec -internet-serviceleistungenmultimedia-produktionen
andreas krahn - moorstrasse 14 - 21614 buxtehude - germany
tel.:
Hello,
Running LM 7.2 from GPL with almost everything installed from scratch, I get a
message in the logs complaining abour missing sound-slot-1, sound-service-1-n
etc...
I have only one soundcard (SB 16 Isa Pnp) and I have modified my modules.conf to
run alsa instead of OSS, so I'm loading
Well, it's not all gibberish. Actually it is formatting instructions
from CUPS.
Hello List:
Just installed LM 7.2 and the only hitch seems to be this printer
problem. Reviewed the driver selection; there aren't many choices.
Again, it's an Epson Stylus color 800.
Got help?
Thanks,
Bill
Check your manual. On my Supra 56k I have C1D2W2. The W2 is what
reports my true connection speed.
-Original Message-
From: Jeff Malka [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 06, 2000 6:10 PM
To: [EMAIL PROTECTED]
Subject: Re: [expert] 3Com US Robotics 56K faxmodem problems
do you have the ip address of the nt box in the
hosts file of the linux box?
bill shannon
( ) ( )-oooO-0---Oooo--
- Original Message -
From:
Mike
Nguyen
To: [EMAIL PROTECTED]
Sent: Thursday, December 07, 2000 2:48
AM
Subject: Re: [expert] FTP
How can make to denied the relay email for my sendamail server except for
my locals domains,( somebody use my server to send mail help)
Maximo Monsalvo
Guspamar S.A
Responsable Sistemas
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
if you install webmin, it gives you a nice easy interface to sendmail. from
there you can setup the actual relay settings per domain name (or ip network
id's)
bill shannon
( ) ( )
-oooO-0---Oooo--
- Original Message -
From: "Maximo Monsalvo" [EMAIL
How can make to denied the relay email for my sendamail server except for
my locals domains,( somebody use my server to send mail help)
Maximo Monsalvo
Guspamar S.A
Responsable Sistemas
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
On Wednesday 06 December 2000 13:58, Dom Savage wrote:
Hi all, got a problem getting my sound card working as it's in a laptop
and it's not plug and play. It works fine with OSSFree, but I was trying
to get the alsa modules from mdk 7.2 to work. So far everything works
fine, as I can play
Trevor
I have an Epson 760 on my Linux machine, using the parr connection not
the USB.
It was recoged during the 7.2 installation and was listed in the printer
drivers.
The only problem I had with it is that after the installation completes and
the system reboots during hardware detection I
On Thursday 07 December 2000 03:16 am, you wrote:
hello:
I just installed LM72 on one of my friends computer, and I just ran in to
a problem with the soundcard: Soundblaster PCI128.
The sound is distorted, My friend is a DJ so there is no chance he can live
with that, so how do I fix that?
On Thursday 07 December 2000 04:16 am, [EMAIL PROTECTED] wrote:
I just installed LM72 on one of my friends computer, and I just ran
in to a problem with the soundcard: Soundblaster PCI128.
The sound is distorted, My friend is a DJ so there is no chance he
can live with that, so how do I fix
Maximo Monsalvo wrote:
How can make to denied the relay email for my sendamail server except for
my locals domains,( somebody use my server to send mail help)
If you are using Linuxconf to configure sendmail, go into the Basic
Sendmail Configuration screen and click the Enable Relay Control
My own followup. Sorry 'bout the shouting in the subject
line of original post. Must have been 3 am and just didn't
notice it.
Bill Barnes [EMAIL PROTECTED] wrote:
Well, it's not all gibberish. Actually it is formatting instructions
from CUPS.
Hello List:
Just installed LM 7.2 and the
Trevor,
Look into the HP printers. I have2 just recently purchased fron Staplesd one
is the 842 and the other is the 648, the 842 was $149.00 and the 648 was
$99.00.
Both are networkable and the 842 prints at near photo quality. AND, both work
beautifully under both Linux and Winderz.
Hi,
Bill Shannon wrote:
if you install webmin, it gives you a nice easy interface to sendmail. from
there you can setup the actual relay settings per domain name (or ip network
id's)
And to add to what Bill wrote, I think the version of Webmin installed
with 7.2 is compatible with sendmail
Hi,
When I use pgaccess in a Linux box with Linux Mandrake 7.1, I can put
characters like:
',c' --- 'ç' (this is the correct char)
'~o' --- 'õ' (this one too)
and others. But when I switch to a box configured with Mandrake Linux 7.2
with portuguese enabled, I get '~o' instead of 'õ'.
I
I know this isn't really for the list but has anyone had any luck with this video card:
S3 Savage/IX graphics controller, with 8MB video memory
I can't see a listing for it on xfree.org but maybe I missed it since I am not real S3
fluent.
Brian D. Klar - CVE
OTS
WPAFB
(937)257-5773
When I choose "medium" security from Drakconf I noticed that a few things
change. One problem that I had was with public_html accounts on the
webserver. I also had a problem with NFS mounts. My question is where are
these changes controlled.
Andy
Keep in touch with
I deleted all the messages about this, thus the new subject. I think the
problem was with the router/firewall address. When using Tzo DDNS You can
pass a null IP Address for the Network Adaptor on the internal machine, thus
posting the Gateway address. You can also choose to pass the Network
you did try nslookup hostname (nslookup www.linux.org) if you try just
nslookup without a host to actually look up, you will get this response.
May not be the problem, though
--- Steve Young [EMAIL PROTECTED] wrote:
i installed the caching dns server on mandrake 7.2, it works fine one
Well that depends on a couple of things. How many hits or what's is the
workload on the web server going to be?
And for the news server are you going to start your own and how many
messages do expect from that?
In other words the server will not handle taking 50,000 hits a day and be
able to
Hello all, I have an old 486 DX that hasn't
been a part of my network, mainly because I always considered it to slow for
practical use.
I'm thinking about installing Linux and using it
as a workhorse: proxy, ftp/web/news server, and it will need to share drives
with a NT (gag) network.
Am
When I choose "medium" security from Drakconf I noticed that a few things
change. One problem that I had was with public_html accounts on the
webserver. I also had a problem with NFS mounts. My question is where are
these changes controlled.
cd /etc/security/msec
Thanks... Dan.
Keep
Hi,
If you look at the error message, you will see that it says that it cannot
find a name for the address 192.168.0.25. The problem is that there is no
proper reverse DNS mapping on the DNS server.
If you create a reverse DNS entry for 192.168.0.x, you should be able to run
nslookup. For
to tell the truth, I think that webmin's sendmail config is version
independent (for basic functionality that is). I currently have the
"default" versions (of sendmail and webmin) from the mdk7.2 install on a
live email server working wonderfully...!!
bill shannon
( ) ( )
in relation to this e-mail
i'd be curious to hear what security level (plus tweaking) i should put on
my webserver. right now my dns is high. very high.
i still have to finish setting up my web and mail.
mind you, i run a web hosting company...so clients will still need some
basic
I modified the file /etc/security/limits.conf so that
my username would be allowed to create large files
(download 700MB iso images). Other users are restricted to
40 MB. The line I added was...
dwoods hard fsize 70
The question is "how do I tell the system about this change
I am running LM 7.1b (hydrogen) on my Sparc 5. xscreensave is not able to
authenticate my login password. The built-in screen saver of KDE 1.1.2 also
failed the password authentication. Does anyone have any pointer on this? Is
there another group for the Sun platform of LM? Thanks.
Keep
7.1 seemed to be happy with my Tseng ET6000 pci video card but alas,
this 7.2 is DOA
X will not start/run, The install seemed to go normally and command
line stuff seems to work.
Any sugestions?
Dave
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing
Hi Jeff,
I don't know if you can force Linux to show you a true connect
speed or not, but if you are curious you can look in the modem
logs. 26.4 to 28.8 is a very normal connect speed with a 33.6 using
an ISP that is not digital. Even with digital you won't see much
difference maybe a bump
I am using alsasound on my system. I have also enabled my ac97 onboard sound
(AK72 AOpen motherboard, via chipset) and am using the snd-card-via686a sound
module. If I load it manually with modprobe AND load snd-pcm-oss, then sound
works. During bootup, however, when it comes time for
Could not stat /mnt/fd0, ignoring drive A:
For language 'en' several language ids were found:
en_US - 0409; en_GB - 0809; en_AU - 0C09; en_CA - 1009;
en_NZ - 1409; en_IE - 1809; en_ZA - 1C09; en_JM - 2009; en_ - 2409; en_BZ -
2809; en_TT - 2C09; Instead of using first in the list, suggest to
Viktor Lakics wrote:
Dear all,
I want to run two different scripts at boot time depending on the lilo
configuration.
Eg.: If lilo entry A is selected, I want to run script A automaticaly.
This script would set up several things, and I want linux to boot into
initlevel 3 .
If you
look at
/etc/hosts.deny
if you've chosen
sec level high there should be an entry like
*:*
deny
kill that line
!!
Best RegardsGerold
Kroetlinger--we are the aol, lower your firewalls and prepare to
install.we will add *our* technological distinctivness to your
own.Uninstallation is
I downloaded the kde-2.0.1 mdk rpms (from Molnar) and something is
just not quite right.
I do NOT have a kpm (used to be ktop) entry in my
kmenu-Applications-Monitoring menu. Isn't there and I cannot put
it there. Running update-menus doesn't work. Logging in as root, opening up
menudrake
personally i would need to know more about the
machine.. ram, hd, nic's...
all in all, anything on a 486 will be slow compared
to a 166mmx setup, but still it will work and network functions (if installed
properly) will barely notice any difference.
I wouldn't do it with less than 64 megs
How do I get sendmail to send an autoreply when sent to certain
addresses? I tried something like this in the alias file but it didn't
seem to load the script: autoreply:"|/home/ar/bin/process"
What am I doing wrong and is there an easier way than using a script?
*^*^*^*
Have the courage
Look in your /etc/hosts.allow and /etc/hosts.deny file.
Original Message Follows
From: "Bill Shannon" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [expert] FTP from Win NT to Linux Mandrake 7.2
Date: Thu, 7 Dec 2000 08:15:07 -0500
do you have the ip
The unfortunate thing is that neither can resize ReiserFS, though PartEd
is definitely working on it [it will be able to do NTFS soon as well].
Mike
On Wed, 6 Dec 2000, Tom Berkley wrote:
Its gnu's parted and it works.
Tom Berkley
Sarang Lakare wrote:
there is something called
I am just looking at this as part of checking everything on the new 7.2
install is working. On 7.1, I set the cacheing DNS up from scratch and
nslookup was fine. The question is, how can I reliably confirm that
cacheing DNS is working? The stats are a bit obtuse and I have not been
able to
Yes, that is the idea. Hopefully they will be able to bring the memory
footprint down. I have tried the 6.05 beta release, which does away with
the Desktop (it starts up in Star Writer)
Buchan
Larry Marshall wrote:
Mike MacCana wrote:
That's true [both projects contain some unique code],
How do you get to the console while in KDE? The normal alt-F2 doesn't work.
What I'm trying to do is to start a second X session for playing Starcraft
under wine with "startx -- :1". Now I need to figure how to make this 640x480
at 8 bit color.
-- Stephen
Keep in touch with
Does anyone in the list make use of 3d apps (povray, ac3d, etc)? If so, has
anyone tried 3dom? I have Mandrake 7.1, kde-1.1.2, and qt-2.0 installed on
my laptop. I downloaded the source to 3dom and it built without problem on
my laptop (takes forever). Trying to build the same src on my
Thank for answer me Sarang
When ever I use the winFTPpro to try to connect from my NT to the Linux
machine, It always said "Connection refuse"
I have the same problem(minus the NT), in my logs I get this:
Dec 7 18:06:14 spud proftpd[6497]: spud.loco (spud.loco[10.0.0.2]) - USER
You need to make sure that the users shell is listed in /etc/shells
Travis
On Thu, 7 Dec 2000, S. Anderson wrote:
Thank for answer me Sarang
When ever I use the winFTPpro to try to connect from my NT to the Linux
machine, It always said "Connection refuse"
I have the same
On Thursday 07 December 2000 14:47, you wrote:
Ultimately, I dumped my AudioPCI and the 128 and went with the built-in
ac97 sound system on my motherboard. Not the best option, and not always
an option for others, but that was the quickest and easiest fix for me. It
works fine for my
Try putting the new config file in
/etc/X11/XF86Config-4
Best of luck.
-- Asheesh.
On Sun, 3 Dec 2000, Tim Faehnle wrote:
Okay, Does Mandrake 7.2 come with 4.0.1 or not? I'm confused by Mandrake
install. (it's buggy and ill-designed, but that's a different discussion)
First of all,
If you are running 7.2, you should be able to do it with "draknet" and
"drakgw". I set up a normal modem gateway (there are some issues), and
there was the option for ISDN, but I'm not sure about the gateway part.
It is definitely possible, drakgw just makes it easy.
AKoTEC - Andreas Krahn
On December 5, 2000 05:14 pm, you wrote:
I've have being trying to get my Voodoo 3 working under XFree86-4.0.1
with the Glide drivers.
I compiled and installed Device3Dfx-2.3-5. I then removed the
Glide_V3-DRI packages and installed the Glide_V3-2.60 packages. Now,
when I attemp to run
Are you using the 3dfx.o kernel module with XFree 4.0.1? or with the custom
X server on the website?
Anthony Russello wrote:
I just recently swapped a Voodoo3 3500TV AGP into my Linux machine (quite
a waste seeing as how there don't seem to be any TV tuner drivers for the
card, but it was
After installing Mandrake and config IPX this is what I get when I run slist.
slist: Server not found (0x8847) in ncp_open
The only thing that I could find out about ncp_open was a message earlier on this
list, but no one replyed to it.
All of the needed RPM's seem to be in place. The
Hey there. I have a fix for your problem.
Once you have the mixer setting you want, run the following as root:
touch /etc/asound.conf
/usr/sbin/alsactl store
Now, whenever you want your old settings back, type:
/usr/sbin/alsactl restore
And, to make this automated, add the following lines
On Fri, Dec 08, 2000 at 02:18:07PM +, Travis Fitch wrote:
You need to make sure that the users shell is listed in /etc/shells
Travis
On Thu, 7 Dec 2000, S. Anderson wrote:
Thank for answer me Sarang
When ever I use the winFTPpro to try to connect from my NT to the
There's some hilarious typos there [using pine over a slow SSH connection], but you
get the idea :-)
Mike MacCana wrote:
Use Ctrl + Alt + (n)
That isn't a KDE2 thing, its an X thing, btw.
By the way, there's scripts you can download for linuxgames [or a site
linked from them] whjich
Jerry,
Kindly do NOT post email in HTML format - Netscape crashes when a
reply is attempted.
[EMAIL PROTECTED] writes:
I think it takes a W1 and an
S??? command in the init string.
S95=1 will report the true modem speed.
This is only true for modems using the Rockwell chipset.
I downloaded the source to the 2.2.17 kernel, applied the patch for the
reiserfs, and built it in to the kernel.
But I still get a kernel panic when I try to boot my LM 7.2. Any one know how
to fix this?
-- Stephen
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL
Mandrake 7.0
Kmail sending stopped working not long after install. Message remains in outbox
although
there is the message that it has been sent. Does the same when trying to send queued
mail
frm the outbox.
I compiled and installed version kmail-1.0.29.1 successfully, but got same results.
I
Thank Guys
I fixed the problem. The file hosts.deny will solve the whole problem.
Thank
From: "Gerold Kroetlinger" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Subject: AW: [expert] FTP from Win NT to Linux Mandrake 7.2
Date: Thu, 7 Dec 2000 18:20:44 +0100
look at
I agree that html mail is a pain in the eyeball, but netscape has never
crashed for me responding to html formatted email. You likely have a
problem with your install or did you need a compelling reason for people
to not use html format? :-)
tom berkley
Ron Stodden wrote:
Jerry,
Kindly do
I decided to go clean install and get a fully 7.2 system. I had a 90%+ 7.2
system before that I had hand-upgraded but some problems occured that I
couldn't define enough to fix and went with a clean slate.
Now that I have finished installing 7.2, there are a few problems that did
not exist
Help! I have put together a small masq box, and now whenever I try to add a RPM
package, I get the error "Incorrect Architecture!" (or something similar). I can use
the switch to ignore this, but
that doesn't help when using Webmin or Mandrake Update. There must be a config file
that is
Is there such a thing as updated ISO files (for burning) for Mandrake
version 7.1? After seeing all the problems with 7.2, I really want to
stick with 7.1, but I'd like to have all the updated packages installed
the first time. If such a thing doesn't exist, how can it be created?
I have
Thanks for mentioning the cdj880 printer driver. I just finished
evaluating several of the printer drivers with my hp895C including the
895, 550, 882, 890, and now the 880 drivers. Without any doubt the
cdj880 driver is the best on the mandrake printer test, the 1 degree
radial lines look
Hi.
I didn't understand much from the error log but on linux I use "Xwrapper
:1 -query server", unless I'm root (which is a bad idea).
Bye
Haim
On Mon, 4 Dec 2000, Dave Peat wrote:
Hello and thanks in advance.
Here's the situation. I had a HP PII 333 running Mandrake 7.1. I could run
68 matches
Mail list logo