On Wednesday 19 May 2004 11:57 pm, [EMAIL PROTECTED] wrote:
> Hi,
>
> Can anyone there please show/driect/point out where the sysinstall
> source is located at? I have the need to edit it and see if its
> possible for me to work on it.
>
> I am using CVS via Internet.
>
/usr/src/release/sysinstal
On Thu, May 20, 2004 at 01:42:00AM -0500, Dan Nelson wrote:
> In the last episode (May 20), Till Plewe said:
> > My problem is essentially that freeing large numbers of small chunks
> > of memory can be very slow. I have run into this problem twice so
> > far.
>
> Do you have a testcase? The atta
On Wednesday 19 May 2004 23:55, Eric Anderson wrote:
> I have several heavily used NFS servers, currently running FreeBSD
> 4.9-RELEASE. I'm getting jammed up with all my nfsd processes being
> busy, so clients see slow connections to the server. I have the nfsd
> starting with a count of 20, whi
[EMAIL PROTECTED] wrote:
That works Great but do you know of anything that works in side the network?
does the same thing but inside the network
Yes, Tptest. Setup a tptest server on your network and use the client to
connect to your own tptest server.
/BH
Is it possible to configure sendmail to forward mail for an entire
domain to another mail server, identified by ip address rather than
domain name, keeping the original To: headers intact?
PWR.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.or
Christian Hiris wrote:
About a year ago i observed strong nfs performance decrease when using
RLT8139A nics. Nfs transfers leaded into high system load, because of an
excessive high packet retransmission rate. Switching over to 3Com nics solved
my problem.
The specific model and it's clos
On Thu, 20 May 2004, Peter Risdon wrote:
> Is it possible to configure sendmail to forward mail for an entire
> domain to another mail server, identified by ip address rather than
> domain name, keeping the original To: headers intact?
Hi!
DIfferent ways to do this:
I assume that the domain exa
Hi all!
I'm trying to build Mozilla 1.6 from source on my FreeBSD 4.9-RELEASE box.
I've got the following error:
gmake[4]: Entering directory `/var/tmp/mozilla/netwerk/dns/src'
nsDNSService2.cpp
c++ -o nsDNSService2.o -c -DOSTYPE=\"FreeBSD4\" -DOSARCH=\"FreeBSD\"
-I../../../d
On Thu, 2004-05-20 at 04:10, Jonathon McKitrick wrote:
> I don't get it. It was working last week. Here's what I get now:
>
> root:~# cvsup /usr/share/examples/cvsup/ports-supfile
> Cannot get IP address of my own host -- is its hostname correct?
> root:~#
>
Try typing "hostname" from the co
I've followed the directions in the handbook for setting up lpd and also
installed apsfilter via ports and ran /usr/local/share/apsfilter/SETUP.
In general printing is working. For example, a text document from OOo
prints just fine. However, when I attempt to print a jpeg file the
result is
i have only 1.38 mb floppy disks, so can i burn those
2 files into one cd and install it by cdrom.
or how do i install with iso files. how much mb does
it take after totall install.
__
Do you Yahoo!?
Yahoo! Domains Claim yours for only $
I have 100% success with using my LSI 20320R card under freebsd 5.2.1
but have not setup any RAID on the card (yet)...so this email
is for pre-information prior to setting up a RAID-1 (mirror):
On a second machine that is running solaris, this is what I see:
May 19 19:40:10 shadow unix: /[EMAIL PRO
Hi,
I want postfix to send email from a domain name different to the one that
it really is. This is because I have no real (as in on the net) domain
associated with it, so I am going to use my website address so that the
from field resolves and relays are happy to pass on my mail.
I have:
set my
On Wed, May 19, 2004 at 07:57:53PM -0700, Kent Stewart wrote:
: You system doesn't know who it is. Check hosts and rc.conf.
I can't believe how dumb I am. I mergemastered and overwrote my /etc/hosts
file. It was a while ago and I forgot.
Thanks for the help.
jm
--
My other computer is your W
Hi.
How to export variable from one kernel module to another?
I add EXPORT_SYMS to makefile and get export_syms file (not empty).
Then i try to load another module which uses exported variable but kldload
failed with message
"kldload: can't load mod3.ko: No such file or directory"
What have i don
I am trying to install FreeBSD on an old laptop that used to run various
versions of Windows. I have two problems...
1. The installation process appears not to see my PCMCIA cards. Running
pccardd says "No PC-CARD slots". That's a shame really, because my ethernet
card is essential. How do I c
Till Plewe wrote:
My problem is essentially that freeing large numbers of small chunks
of memory can be very slow. I have run into this problem twice so far.
[ ... ]
One solution would be to divide the memory in larger regions and to
tell malloc which chunk to use for the next few calls, respective
Hello,
I am a newbie about FreeBSD but I like this gorgeous OS, elegant and
powerful. But FreeBSD is again mysterious for me. I have two problems.
First problem :
I have two partitions on my hard disk (Western Digital 20GB) with
FreeBSD 5.1 and Windows Server 2003.
At present time
: You system doesn't know who it is. Check hosts and rc.conf.
Actually, I'm only half a fool. I started to fix hosts, and found a swap
file. Apparently, I had started to fix the file, but forgot about it.
Thanks again.
jm
--
My other computer is your Windows box.
I have a new server set up and running and am getting a slew of
messages from cron, like this -
Subject: Cron <[EMAIL PROTECTED]> root /usr/libexec/atrun
Body: root: not found
and
Cron <[EMAIL PROTECTED]> operator /usr/libexec/save-entropy
operator: not found
What's going on with cron?
T
On Wed, May 19, 2004 at 09:13:23PM +, Mark wrote:
> Ok, I bought the Promise Ultra133, and now FreeBSD (4.9R) recognized my third IDE
> port:
>
> ATA channel 2:
> Master: ad4 ATA/ATAPI rev 7
> Slave: no device present
>
> But I cannot mount it! "mount /dev/ad4s1a /backup" say
Hi all folks,
FreeBSD 5.2
===
I am trying to learn recompiling kernel. I visited
following link;
http://www.freebsd.org/doc/en_US.IS...g-building.html
But I am still not very clear of the correct steps to
be taken. I suppose taking following steps
# cd /usr/src/sys/i386/conf
# cp GENERI
Please read http://www.lemis.com/questions.html
Praneeth Reddy wrote:
i have only 1.38 mb floppy disks, so can i burn those
2 files into one cd and install it by cdrom.
You have a few choices:
1) if you don't have a CD, you can create two floppies,
boot from them and install via ftp over the int
On Tue, 18 May 2004 14:04:45 +0400
Schizik <[EMAIL PROTECTED]> wrote:
>
> Greetings, gurus!
>
> I do need to limit people from my internal LAN to access
> filesharing services like eDonkey, Mule, Kaza, etc
>
> The problem is that it is can not be done with port ranges
> based ipfw rules, becaus
On Wed, 19 May 2004, Mark wrote:
> "mount: /dev/ad4s1a: No such file or directory"
>
> And /dev/ad4 does not exist in /dev/. How do I create it??
MAKEDEV?
cd /dev
sh MAKEDEV ad4
---
david raistrickhttp://www.netmeister.org/news/learn2quote.html
[EMAIL PROTECTED] http://www.
On Thursday 20 May 2004 09:14, carvin5string wrote:
> I have a new server set up and running and am getting a slew of
> messages from cron, like this -
>
> Subject: Cron <[EMAIL PROTECTED]> root /usr/libexec/atrun
> Body: root: not found
>
> and
>
> Cron <[EMAIL PROTECTED]> operator /usr/libexec/sa
Steve Shorter wrote:
On Wed, May 19, 2004 at 04:55:20PM -0500, Eric Anderson wrote:
I have several heavily used NFS servers, currently running FreeBSD
4.9-RELEASE. I'm getting jammed up with all my nfsd processes being
busy, so clients see slow connections to the server. I have the nfsd
start
carvin5string wrote:
I have a new server set up and running and am getting a slew of
messages from cron, like this -
Subject: Cron <[EMAIL PROTECTED]> root /usr/libexec/atrun
Body: root: not found
and
Cron <[EMAIL PROTECTED]> operator /usr/libexec/save-entropy
operator: not found
What's g
Just a followup to let folks know that the GPG signature is working
now -- looks like the patch/signature files have been updated, and
the signature checks out.
--
Saint Aardvark the Carpeted
[EMAIL PROTECTED]
Because the plural of Anecdote is Myth.
___
Stephen Liu wrote:
Hi all folks,
FreeBSD 5.2
===
I am trying to learn recompiling kernel. I visited
following link;
http://www.freebsd.org/doc/en_US.IS...g-building.html
But I am still not very clear of the correct steps to
be taken. I suppose taking following steps
# cd /usr/src/sys/i386/c
At 2004-05-18T23:36:29Z, [EMAIL PROTECTED] writes:
> i'm 16 by the way, thanx a whole lot! Troye. sexy brittany spears
After seeing the results you got, I'm going to adopt that as my new .sig.
Thanks for the tip!
--
Kirk Strauser
i'm 16 by the way - sexy brittany spears
pgpKQfHpENm3r.pgp
Descr
Hi Bill,
Tks for your advice.
- snip -
> > # cd /usr/src/sys/i386/conf
> > # cp GENERIC GENERIC.bak
> > # cp GENERIC MYKERNEL
> > # ee MYKERNEL
> > (modifying the kernel)
>
> This is good ... although making a backup of GENERIC
> is
> somewhat redundant.
Noted with thanks. But in case of troub
On Thursday 20 May 2004 17:47, Bill Moran wrote:
> carvin5string wrote:
> > I have a new server set up and running and am getting a slew of
> > messages from cron, like this -
> >
> > Subject: Cron <[EMAIL PROTECTED]> root /usr/libexec/atrun
> > Body: root: not found
> >
> > and
> >
> > Cron <[EMAI
Hello,
I am in search for a application that I can use on my freebsd machine to
read a mail spool and track email's that are sent in from customers. I would
like to be able to track what employee has replied to how many email's. It
would also be of great help if the application had the abilit
Stephen Liu wrote:
Hi Bill,
Tks for your advice.
- snip -
# cd /usr/src/sys/i386/conf
# cp GENERIC GENERIC.bak
# cp GENERIC MYKERNEL
# ee MYKERNEL
(modifying the kernel)
This is good ... although making a backup of GENERIC
is
somewhat redundant.
Noted with thanks. But in case of trouble where can
>
> Hello,
>
> I am a newbie about FreeBSD but I like this gorgeous OS, elegant and
> powerful. But FreeBSD is again mysterious for me. I have two problems.
>
> First problem :
>
> I have two partitions on my hard disk (Western Digital 20GB) with
> FreeBSD 5.1 and Windows Server 2003.
Hello list,
First off, please respond to me in a CC, as I'm not subscribed to this list.
Secondly, I've set this up a few times now, and it's always just worked, but
this time I've got errors. I'm trying to set up the pgp/MIME plugin.
Everything is working fine, except I never get the pinentr
On Thursday 20 May 2004 18:39, Stephen Liu wrote:
> Hi Bill,
>
> Tks for your advice.
>
> - snip -
>
> > > # cd /usr/src/sys/i386/conf
> > > # cp GENERIC GENERIC.bak
> > > # cp GENERIC MYKERNEL
> > > # ee MYKERNEL
> > > (modifying the kernel)
> >
> > This is good ... although making a backup of GEN
I delved into trying to determine the cause of an unreasonably high
number of Ierrs on a few FreeBSD routers we have setup on campus. While
probing through the netstat output on the machines I realized that I
don't understand the exact difference between the 'inet' and 'link'
protocol families. N
Thank you for reading this message.
I have installed FreeBSD 4.10r2 and am having trouble with the printer setup.
This is on and OLD Gateway P5-100, 128mb ram (yah-100Mhz!). It is a direct
connect to the parallel port. My main source document is the FreeBSD Handbook,
2nd ed. and the online Handb
The problem most likely has little to do with your computer or cables.
Setting up printers on Unix can be a pain. I recommend using the
apsfilter or cups port instead of trying to set it up manually. I've
used both and have had success with both, but settled upon apsfilter
(for no particular reas
Hi all,
Currently I have a two computers :
- The first one is my gateway. It's running Freebsd 5.2 stable, has two
networks cards, a realtek 8139 and a broadcom 4401
- The second one is my laptop and it's running most of the time Linux
(Mandrake cooker with a 2.6 kernel), sometimes winxp (because
I'm looking for some quick help with the 5.2.1 C compiler. In FBSD 4.x
I could write multi-line printf() statements with embedded new-lines
such as:
printf("
hello,
this
is
a
test");
In 5.2.1, the newli
On Thu, May 20, 2004 at 11:23:01AM -0600, Nathan Kinkade wrote:
> I delved into trying to determine the cause of an unreasonably high
> number of Ierrs on a few FreeBSD routers we have setup on campus. While
> probing through the netstat output on the machines I realized that I
> don't understand
On Thu, May 20, 2004 at 12:54:59PM -0600, Shawn Guillemette wrote:
> Hello,
>
> I am in search for a application that I can use on my freebsd machine to
> read a mail spool and track email's that are sent in from customers. I would
> like to be able to track what employee has replied to how ma
On Thursday 20 May 2004 19:23, Eric Crist wrote:
> Hello list,
>
> First off, please respond to me in a CC, as I'm not subscribed to this
> list.
>
> Secondly, I've set this up a few times now, and it's always just worked,
> but this time I've got errors. I'm trying to set up the pgp/MIME plugin.
I keep having the same problem with login. The system keeps indicating that
the password is incorrect. I have been able to reset the password and still
it gives me the same message.
I just started running FreBSD and I was setting up Samba when this occurred.
Please help!
Thanks
Chris
On Thursday 20 May 2004 14:11, you wrote:
> On Thursday 20 May 2004 19:23, Eric Crist wrote:
> > Hello list,
> >
> > First off, please respond to me in a CC, as I'm not subscribed to this
> > list.
> >
> > Secondly, I've set this up a few times now, and it's always just worked,
> > but this time I'
Hey Chris,
Christopher Svensrud wrote:
I keep having the same problem with login. The system keeps indicating that
the password is incorrect. I have been able to reset the password and still
it gives me the same message.
jup, unless you provide some more details we cannot actually try and
solve y
Christopher Svensrud wrote:
I keep having the same problem with login. The system keeps indicating that
the password is incorrect. I have been able to reset the password and still
it gives me the same message.
I just started running FreBSD and I was setting up Samba when this occurred.
Reboot the s
Gary Kline wrote:
I think we (theBSD's) are losing a lot of serious brain
brainpower (and certainly lots of latent high-end talent)
by not having a less-headbanging install. I've done it
literally dozens of times; I still get flummoxed now and
then.
I've been using sysinstall for many years
Uwe Laverenz wrote:
Gary Kline wrote:
I think we (theBSD's) are losing a lot of serious brain
brainpower (and certainly lots of latent high-end talent)
by not having a less-headbanging install. I've done it
literally dozens of times; I still get flummoxed now and
then.
I've b
I am currently on 4.7 i386. I would like to start backingup my system. I
have a extenal ExabyteM2 installed . but for some reason I cant not write to
the type deck.is there a way that you can help me.
Thank you
___
[EMAIL PROTECTED] mailing list
http://l
Hi,
I'm new to SCSI and all it's subsystems and this is the first time I'm
having troubles with it. This morning I got the folowing kernel error
message:
---
May 20 10:39:59 banners /kernel: (da0:ahc0:0:0
I had been having some problems installing ports: they manifested as
configure misreading the system type and setting up libtool so it
wouldn't build shared libs.
After some correspondence with a FreeBSD team member and a port
maintainer, I decided to start afresh with a kernel and world
reins
Jon <[EMAIL PROTECTED]> writes:
> I'm looking for some quick help with the 5.2.1 C compiler. In FBSD 4.x
> I could write multi-line printf() statements with embedded new-lines
> such as:
>
> printf("
> hello,
> this
> is
>
> Hi,
>
> I'm new to SCSI and all it's subsystems and this is the first time I'm
> having troubles with it. This morning I got the folowing kernel error
> message:
This means that your drive decided not to return a command back to the
controller. The controller driver was able to clear up the er
On Thu, May 20, 2004 at 08:03:58PM +0100, Matthew Seaman wrote:
> On Thu, May 20, 2004 at 11:23:01AM -0600, Nathan Kinkade wrote:
> > I delved into trying to determine the cause of an unreasonably high
> > number of Ierrs on a few FreeBSD routers we have setup on campus. While
> > probing through
On Thursday 20 May 2004 21:22, Eric Crist wrote:
> On Thursday 20 May 2004 14:11, you wrote:
> > On Thursday 20 May 2004 19:23, Eric Crist wrote:
> > > Hello list,
> > >
> > > First off, please respond to me in a CC, as I'm not subscribed to this
> > > list.
> > >
> > > Secondly, I've set this up a
--- Bill Moran <[EMAIL PROTECTED]> wrote:
> You've got a user's crontab created in the format of the system
> crontab.
>
> The system crontab has an extra field to designate the user under
> which
> the job should run. When this field is entered in a user's crontab,
> cron interprets it as the c
On Thursday 20 May 2004 22:57, carvin5string wrote:
> --- Bill Moran <[EMAIL PROTECTED]> wrote:
> > You've got a user's crontab created in the format of the system
> > crontab.
> >
> > The system crontab has an extra field to designate the user under
> > which
> > the job should run. When this fie
On Thursday 20 May 2004 02:27 pm, Richard Kästner wrote:
> Help please!
>
> Up to yesterday, I could make buildworld / kernel etc without
> problem.
>
> Since today (after cvsup, RELENG_4_9) I get:
>
> c++ -O -pipe -march=pentiumpro -DHAVE_CONFIG_H
> -I/usr/src/gnu/usr.bin/groff/
> src/preproc/soe
Help please!
Up to yesterday, I could make buildworld / kernel etc without problem.
Since today (after cvsup, RELENG_4_9) I get:
c++ -O -pipe -march=pentiumpro -DHAVE_CONFIG_H -I/usr/src/gnu/usr.bin/groff/
src/preproc/soelim/../../../../../../contrib/groff/src/include -I/usr/src/
gnu/usr.bin/g
One of you said something that go me thinking. I checked the value of
GPG_AGENT_INFO, and noticed that it referenced an old instance of gpg-agent.
I fixed this, now it works.
Thanks!
--
Aleph-null bottles of beer on the wall,
Aleph-null bottles of beer,
You take one down, and pass
On Thursday 20 May 2004 23:34, Kent Stewart wrote:
> *This message was transferred with a trial version of CommuniGate(tm) Pro*
>
> On Thursday 20 May 2004 02:27 pm, Richard Kästner wrote:
> > Help please!
> >
> > Up to yesterday, I could make buildworld / kernel etc without
> > problem.
> >
> > .
Jason Taylor wrote:
I've followed the directions in the handbook for setting up lpd and also
installed apsfilter via ports and ran /usr/local/share/apsfilter/SETUP.
In general printing is working. For example, a text document from OOo
prints just fine. However, when I attempt to print a jpeg
[Please use "reply-all" to keep the mailing list in the recipient list]
Christopher Svensrud wrote:
I have tried your suggestion and I get the same problem. "incorrect
password".
Are you saying you're getting the login error when you try to login in from
Windows via smb? If so, this is a completel
[Please user "reply to all" to keep the mailing list
on the recipient list]
Praneeth Reddy wrote:
my computer has ethernet internet connection. i use
linksys lan card. if i reinstall system i have to
reinstall the lan software. but it says its designed
for windows only. and i want to remove windows
I am very new to anything but Windows and some MAC. I bought a retail box
of 4.7 about 2 years ago.It had no printed material.I tried for about a
month to get it up and running but I gave up. I was to new. I talked to
people in my department about how to learn the program and they suggested I
g
Doug Lawrence wrote:
I am very new to anything but Windows and some MAC. I bought a retail
box of 4.7 about 2 years ago.It had no printed material.I tried for
about a month to get it up and running but I gave up. I was to new. I
talked to people in my department about how to learn the program an
All the ups ports seem to be only for APC UPSs, but I have a Belkin
F6C120-UNV connected over usb (it is recognized as uhid0 when
connected). Serial would be ok, but I don't see any ports that would
work for that either. On Belkin.com there is ups daemon there for
FreeBSD 2.2.8. which doesnt wo
On Thu, 20 May 2004, Donald Szatkowski wrote:
> I have installed FreeBSD 4.10r2 and am having trouble with the printer setup.
> This is on and OLD Gateway P5-100, 128mb ram (yah-100Mhz!).
This should be fine.
> It is a direct connect to the parallel port. My main source document
> is the FreeBSD
carvin5string wrote:
--- Bill Moran <[EMAIL PROTECTED]> wrote:
You've got a user's crontab created in the format of the system
crontab.
The system crontab has an extra field to designate the user under
which
the job should run. When this field is entered in a user's crontab,
cron interprets it as
hello all,
I'm hoping someone can give me a hand with this. I have a suspicion as
to what is causing this, but I don't want to "taint" any replies I get.
If any of knowledgeable folks out there could help me out, offer
possible areas to look into, better places to contact, or anything that
could po
Went looking all over the internet for this and can't find anything. I'm
looking for either a console based or graphically based (preferably the
second) sound capture and possibly a sound editing program. What I'm doing
is converting all my old audio tapes to MP3 before the tapes die and the
Hi,
my box is
FreeBSD cpqbsd5.famaco.com 5.2.1-RELEASE-p6 FreeBSD 5.2.1-RELEASE-p6 #1:
Wed May 19 11:28:43 MYT 2004
[EMAIL PROTECTED]:/home/usr/obj/home/usr/src/sys/CPQBSD5 i386
i'm doing portupgrade -aR
and it stop at
ln -s /home/usr/ports/x11/XFree86-4-libraries/work/xc/lib/Xau/AuRead.c
On Wed, May 19, 2004 at 02:20:55PM -0400, Chiang Seng Chang wrote:
> === quote ===
>
> OPTIONS=THREADS "Enable thread support" on \
> HUGE_STACK_SIZE "Use a larger thread stack" off \
> UCS2 "Use UCS2 instead of UCS4 for unicode support" off \
>
Guys,
It may just be me, but I stared at the *original*
apache.sh script for 45 minutes before figuring out
how it worked. apache was down here for more than a
few hours.
This is my rewrite::
# DO NOT CHANGE THESE DEFAULT VALUES HERE,
# instead,
On Thu, 20 May 2004 19:41:54 -0400, Bill Moran <[EMAIL PROTECTED]>
wrote:
Doug Lawrence wrote:
I am very new to anything but Windows and some MAC. I bought a retail
box of 4.7 about 2 years ago.It had no printed material.I tried for
about a month to get it up and running but I gave up. I was
Hello,
I am trying to use a Perl Module which depends upon a shared library.
This shared library is compiled for Linux. The the linux_base-7.1_7 port
contains the dependencies for this library.
Can anyone tell me if it's possible to have Perl 5.8 (built for FreeBSD
4.9) run a Perl Module with thi
Doug Lawrence wrote:
I am very new to anything but Windows and some MAC. I bought a retail
box of 4.7 about 2 years ago.It had no printed material.I tried for
about a month to get it up and running but I gave up. I was to new.
I talked to people in my department about how to learn the program
and
Hello all. I"m in the market for a new sound card and I'm curious what cards
other people may have had success with. I specifically need a SP/DIF optical
audio out port. If anyone knows of any card that has a functioning SP/DIF port
under FreeBSD, let me know.
--
Andy Miller
pgpPLJlbgAeGx.pgp
Des
Hi there,
I'm interested in what motherboards most recommend now for higher
performance FreeBSD 4.x and 5.x systems. I've a SOYO Dragon Platinum,
with SATA and have had several problems, such that I will replace it
with something better -- perhaps ASUS?
Feedback appreciated.
I needed to install something better then perl 5.6.1 in order to install
something from another port. So I did a locate on perl and
found /usr/ports/lang/perl5.8 So I cd to the dir and make install and after
it completed with no errors the I go back to the port I was attempting to
install and
In the immortal words of "Shawn Guillemette" <[EMAIL PROTECTED]>...
> Unfortunately I dont know what version I has using before. I was
> wondering if there was somthign I needed to do to stop using the older
> version and start using the new one?
check the /usr/ports/UPDATING file, I think it's a
On Thursday 20 May 2004 08:51 pm, Shawn Guillemette wrote:
> I needed to install something better then perl 5.6.1 in order to
> install something from another port. So I did a locate on perl and
> found /usr/ports/lang/perl5.8 So I cd to the dir and make install
> and after it completed with no er
Aurimas Mikalauskas <[EMAIL PROTECTED]> writes
>> May 20 10:39:59 banners /kernel: (da0:ahc0:0:0:0): SCB 0x35 - timed out
>> May 20 10:40:04 banners /kernel: >> Dump Card State Begins
<
:
:
and "Justin T. Gibbs" <[EMAIL PROTECTED]> replies:
> This mean
In the last episode (May 20), Brian Minard said:
> I am trying to use a Perl Module which depends upon a shared library.
> This shared library is compiled for Linux. The the linux_base-7.1_7
> port contains the dependencies for this library.
>
> Can anyone tell me if it's possible to have Perl 5.8
Hi,
I'm plan to disable atime updates in some Web + MySQL servers (to get a
bit more performance, even if insignificant).
Is there any OS, Apache or MySQL feature that would be affected by
setting noatime in fstab? ( I couldn't find any reference, even man 8
mount says it's hardly ever used)
T
I can tell you that audigy cards only work in current. I don't know if
the sony phillips digital interface (or whatever) works in freebsd or
not. I've never tried. The opensound commercial drivers may support
it.
On May 20, 2004, at 9:36 PM, Andy Miller wrote:
Hello all. I"m in the market fo
Norberto Meijome wrote:
Hi,
I'm plan to disable atime updates in some Web + MySQL servers (to get a
bit more performance, even if insignificant).
Is there any OS, Apache or MySQL feature that would be affected by
setting noatime in fstab? ( I couldn't find any reference, even man 8
mount says i
Forrest Aldrich wrote:
Hi there,
I'm interested in what motherboards most recommend now for higher
performance FreeBSD 4.x and 5.x systems. I've a SOYO Dragon Platinum,
with SATA and have had several problems, such that I will replace it
with something better -- perhaps ASUS?
Someone has a su
did you enter the command
use.perl port
after installing perl 5.8 _before_ rebuilding rt3 ?? Perl by default
will continue to use the perl supplied with the initial site distro...
to switch back it
use.perl site
mjt
On Fri, 2004-05-21 at 13:51, Shawn Guillemette wrote:
> I needed to instal
dear All,
I running named in sandbox as a secondary name server with FreeBSD-5.1.p17,
Named log always complain:
named-xfer exited with signal 6 and slave zone expired for every zone
transfer.
but, when it's running on default mode (no chroot sandbox) or as a
primary server (with chroot sandbox).
Mahalo nui loa to all who responded. The solution provided by Nicholas
worked. I now have adequate space on /usr.
Thanks again.
Robert
> > On Thursday 20 May 2004 02:19 am, [EMAIL PROTECTED] wrote:
> > > Aloha Nicholas
> > > Thanks for responding. I had just received a hint
> > > about growfs
Hello,
I am very concerned about the security of my servers. My favourite
file-management software does not support any other unix standards than
plain ftp.
How is it possible to set up my FreeBSD 5.2.1 that way, that it will
accept ftp connections only from itself, so that iff the login to the
Le ven, 21/05/2004 à 00:23 -0500, Jorge Mario G. a écrit :
> > My problem is :
> > I have very poor performances with tcp streams from
> > my server to my
> > laptop (0.35 Mb/s), but throughput is normal from
> > the laptop to the
> > server (90Mb/s) and also (my favorite one) from
> > Internet to
You need to compile named-xfer as statically linked, or move it's dependant
libraries into the chroot.
Can't remember the details of how I did that, and I don't use named any
more - but that's your problem.
hope that helps.
m/
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EM
but I found this in /var/db/pkg/python/options:
# This file is auto-generated by 'make config'.
# No user-servicable parts inside!
# Options for python-2.3.3_5
_OPTIONS_READ=python-2.3.3_5
WITH_THREADS=true
WITHOUT_HUGE_STACK_SIZE=true
WITH_UCS2=true
WITH_PYMALLOC=true
So I suppose the safest way
Summery: 3rd yr. Bacholars Fine Art Student. (Painting Sculpture)
Direction: Masters Architecture & Civil Engineering
Goals: Compitant undrstranding of computers and how they function, how
to configure them to work for me, no prior skills other than
100 matches
Mail list logo