Hi,
I need to create a dsp1 device. I'm running FreeBSD 5.2.1-RELEASE-p9
I've tried:
[EMAIL PROTECTED]:/dev]# mknod /dev/dsp1 c 30 0x0013
mknod: /dev/dsp1: No such file or directory
but no luck.. I need this device because I need to use two programs who
will put dsp device in r/w. So the
2004 23:48:24 - (GMT), Hugo Silva [EMAIL PROTECTED]
wrote:
Hi,
I need to create a dsp1 device. I'm running FreeBSD 5.2.1-RELEASE-p9
I've tried:
[EMAIL PROTECTED]:/dev]# mknod /dev/dsp1 c 30 0x0013
mknod: /dev/dsp1: No such file or directory
but no luck.. I need this device because I
Hi list,
I have been considering using vmware instead of bsd jails for a virtual
server provider. Jails are far too limited (1 ip only, quotas = per-jail
fs,etc). I have never tried vmware with freebsd as a guest os, so I don't
know if these limitations would apply..
What are your personal
Hi all
In one of my servers I left a 80GB disk unpartitioned to later partitition
it according to my needs, only to have sysinstall always complain it
couldn't write to ad1. I've googled a bit and it seems its related to some
kind of protection that won't allow the system to create any new
(...)
defined
In file included from /usr/obj/usr/src/kerberos5/lib/libroken/roken.h:59,
from /usr/src/crypto/heimdal/lib/roken/vis.c:43:
/usr/obj/usr/src/i386/usr/include/netdb.h:166:1: warning: this is the
location of the previous definition
In file included from
Hi,
I've been struggling to find the best virtual server solution based on a
FreeBSD 5.2.1 system. I was hoping some members of the list could help me
take this decision. I have questions/thoughts regarding vmware/bsd jails:
- Vmware
- Does it run 5.2.1 nicely ?
- Does a Guest OS
Hi folks,
I have a Dual Xeon 2.8ghz w/ 4GB ram, 2x80GB hdd + 200GB hdd running
FreeBSD 5.2.1-p9 on a em0 network card.Every once in awhile, em0 will
simply die. These are the longs from the last time:
Jul 22 18:15:15 rhea kernel: em0: Link is up 100 Mbps Full Duplex
Jul 22 18:22:33 rhea kernel:
Hi,
Ok, so I decided to use jails instead of vmware and try to live with the
limitations (only 1 ip address, etc..)..
Well, another jail limitation is the impossibility of setting user quotas
inside a jail UNLESS the jail has a filesystem on its own (at least this
is the most satisfatory answer
Hi list,
I have a Dual Xeon 2.8ghz w/ SMP enabled on a 5.2.1 server which is
panicking under high loads. While I don't have a copy of the panic with me
(datacenter still didn't mail it to me), I have seen this problem a while
ago, don't remember if on this list.
The problem was the same, 5.2 ,
I am running a Dual Xeon 2.8ghz w/ SMP, SCHED_ULE on FreeBSD
5.2.1-RELEASE-p9.
Whenever I load the server a bit more (let [EMAIL PROTECTED] run, compile stuff in
multiple jails, etc), it will simple go offline. I confirmed with the
datacenter and it is indeed a panic, but the datacenter didn't
August 2004 15:08, Hugo Silva wrote:
I am running a Dual Xeon 2.8ghz w/ SMP, SCHED_ULE on FreeBSD
5.2.1-RELEASE-p9.
Why aren't you running FreeBSD 4.10 on a machine like that? 5.2.1 is
simply
NOT ready for production enviroments. Why do you think it's still
considered
as unstable? Your panic
On Sunday 01 August 2004 15:08, Hugo Silva wrote:
I am running a Dual Xeon 2.8ghz w/ SMP, SCHED_ULE
on FreeBSD
5.2.1-RELEASE-p9.
Why aren't you running FreeBSD 4.10 on a machine
like that? 5.2.1 is
simply
NOT ready for production enviroments. Why do you
think it's still
considered
as unstable
Hi,
Is there a way to turn this option on while the system is running, or make
it the default option on the next reboot?
Regards
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
(note: I'm not subscribed to the list with this email, but I couldn't
send this large mail by my webmail)
Hey list,
Recently my server started failing daily, I though it was because of
high loads. Now it even goes down if completely idle after a few hours.
I *still* don't have the panic
Hugo Silva wrote:
Hey list,
My last move on the server trouble was changing back some sysctl's to
their original values.
Here is how loader.conf and sysctl.conf look now:
(the #commented values were the sysctls active when the server used to
die. one of these was causing the problem,
since
NeverWinter Nights
Return to Castle Wolfenstein
Return to Castle Wolfenstein: Enemy Territory
Quake 3
What are the funnest, best look, best quality 3D game you have come across
in
the ports collection. Some I will list:
BZFlag
UT2003
Foobillard
TORCS
BillardGL
LBreakout (Not 3D But
Hey,
I wanted to know if the patches available for ALTQ on FreeBSD 5.x work on
5.2.1.
I can't test this myself because the only 5.2.1 server I have is a
production server and I'd like to be 100% sure it will work first.
I don't know if the patches will apply cleanly, the latest I found were
for
You do have a user interface, just not a graphical one :-)
Anyway,
You have to manually install/configure the desktop environment..
if you have all the cds, run /stand/sysinstall as root, do post
configuration on freebsd, and add the packages needed (mainly X, and your
graphical environment of
Hi,
I'm working on a project to change the network on my school to open source
software only (FreeBSD/Linux workstations only).
I knew about NIS from readings of the handbook years ago, so I revisited
it today, but there' is something that's missing. I understand the NIS
accounts reside on the
NIS exports info from a passwd file. So this will include user
information and ect... groups can also be exported to... the means
using NFS you can export a file system or place on a fs. Allowing you
to export /usr/home or the like
Point well taken, I didn't think on this. Should do the
After modifying the sshd.conf to allow my new IP access via ssh I can't
connect. I have stopped and restarted the service and the server and
double
'Allow your new ip address' ?
What you can specify on /etc/ssh/sshd_config is the ip the server binds
to, not the ip addresses of the clients
Hi,
Today I went to a friend's house to install FreeBSD on his workstation,
trying to make him change to open source software. I am a cable user and
he has ADSL. I had never configured ADSL on FreeBSD, nor USB connections
to the net. So I did some pre-reading on the handbook and some tutorials..
requests have been sent, and the driver is
abandoning the negotiation)
Any feedback is VERY MUCH welcome :-)
Regards,
Hugo
Hugo Silva ([EMAIL PROTECTED]) [040829 08:53]:
Today I went to a friend's house to install FreeBSD on his workstation,
trying to make him change to open source software. I am
I've had a 4.8 server with 280 days uptime, then the motherboard burned :/
I try never to reboot my servers, only when critical security updates are
issued. The reason for this is I work with shell providers mostly, and the
uptime is a big factor for the clients.
But of course, if choosing to
Leonid Baryudin wrote:
I'm trying to load Marvell if_myk.ko kernel module. In FreeBSD 5.4 vanilla
it works fine, creates device node, etc...
In my distribution (based on the same 5.4, but with some changes) driver
gets loaded (kldstat shows that), but device node is not created.
Nikolas Britton wrote:
On 4/12/06, Bryan Curl [EMAIL PROTECTED] wrote:
Ted Mittelstaedt wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bryan Curl
Sent: Wednesday, April 12, 2006 11:27 AM
To: freebsd-questions@freebsd.org
Subject: Re:
Robert Huff wrote:
Jonathan Horne writes:
my box has a firewire port that is showing up as fwe0. it is not
being used, and i would like to eliminate this device from the
network configuration. (some applications try to bind to this as
its default interface, ex: iftop).
how do i go
Andrew Spott wrote:
I'm interested in setting up a system that will give one person a guarenteed
amount of bandwidth. For example. If everyone of the network is using the
internet, he is guarenteed a certain amount of bandwidth, but only if he is
using it. Basically, I want to give him
On Thursday 16 September 2004 21:19, Thomas T. Veldhouse wrote:
Bruno Afonso wrote:
Thomas T. Veldhouse wrote:
Max Laier wrote:
Okay, have you guys read UPDATING?
Yes, but it is from a BETA3 install ... so the user/group was already
their. Besides, installworld will fail unless this
Hey,
It's very simple!
Assuming you have an updated ports tree, just do this as root:
cd /usr/ports/www/apache13
make install clean
Hey
I am a novice at FreeBSD! I want to install apache v 1.3.28 in my FreeBSD
5.21.
Can u guys help me? How to proceed?
-macuser
On Friday 17 September 2004 20:51, Hugo Silva wrote:
Did you put in device pflog as well? What does $ifconfig pflog0
say?
[EMAIL PROTECTED]:/home/klr]# ifconfig pflog0
pflog0: flags=41UP,RUNNING mtu 33208
Okay, for some reason pflogd is *not* running! Otherwise you'd have pflog0
Hi,
I'm running into trouble trying to run the DooM3 beta on FreeBSD.
The screen will stay gray for awhile and then my resolution will be messed
up and the system mouseless (cursor won't move) - I can fix this by
running Return to Castle Wolfenstein which will give back mouse control
and reset
Hi list,
All that was needed was upgrading the nvidia-driver. Worked after this :-)
On Wed, Oct 06, 2004 at 12:28:15AM -, Hugo Silva wrote:
Hi,
I'm running into trouble trying to run the DooM3 beta on FreeBSD.
Yesterday I installed the Doom3 client on 5.3(-BETA5) and the game runs
Hey,
I really need to get Age of Empires II - The Conquerors Expansion working
on my (only workstation) FreeBSD box.
I don't have windows anymore and I'll not switch back to be able to play,
but I'd like to know if it is possible at all to run the game on BSD.
Perhaps winex ? I heard it is
don't know where to get it for free
(or if it can be downloaded freely for bsd at all), and I'm not sure if it
compiles OK on 5.2.1; I've heard people had some success with some
patches.
On Fri, Oct 08, 2004 at 09:20:37PM -, Hugo Silva wrote:
I really need to get Age of Empires II
This is a fake!
DONT download the patch (linux users), it is a trojaned version.
Check: http://www.linux.ie/pipermail/ilug/2004-October/019483.html
[logo_rh_home.png]
Original issue date: October 20, 2004
Last revised: October 20, 2004
Source: RedHat
A complete revision
Hi,
I'd like to know where I could get a complete list of the possible process
states shown in ps , and their meanings ?
Regards
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
man ps / freebsd handbook don't speak about this, afaik.
On Mon, 1 Nov 2004 20:17:01 - (GMT), Hugo Silva [EMAIL PROTECTED]
wrote:
Hi,
I'd like to know where I could get a complete list of the possible
process
states shown in ps , and their meanings ?
A good starting point is
$ man
[EMAIL PROTECTED]:/home/killer/] sysctl kern.smp.active
kern.smp.active: 0
On Sat, Oct 30, 2004 at 01:43:09PM -0700, Luke wrote:
I haven't updated my system since August, but back then the apic
device
was also required. 5.3 may be different.
This is the relevant section from my 5.2-CURRENT
Hi list,
For a server I will be setting up, I am considering using gjournal on
the partition that will hold all the www data.
The journaled partition (mounted async) would be mostly read from,
uploads would not be very frequent and most sites wouldn't write to the
disk. Logs would be kept
Hello,
I'm setting up an IPsec tunnel between a OpenBSD/isakmpd box and a
FreeBSD 8.2-STABLE/ipsec-tools racoon.
It looks something like this:
[lan a(OPENBSD_NET)]--[openbsd]--i-p-s-e-c--[freebsd]--[lan
b(FREEBSD_NET)]
The FreeBSD server also runs OpenVPN, for end-user VPN. The ipv4 range
is
I'm wondering. On a virtual machine (amd64 HVM+PV), it's crashing every
time. Not sure if this is SNAFU, as I had never used ufs snapshots on
freebsd before.
After running mksnap_ffs, ssh stops working (a telnet session doesn't
show the sshd banner). The ssh session where the command was run from
On 08/19/11 18:46, Brandon Gooch wrote:
On Aug 19, 2011 10:29 AM, Net Warrior netwarrior...@gmail.com wrote:
Hi
Does anyone know if there is any progress on this project or how can I
track/test it?
Thanks you-
Regards
I'm interested in this as well, and I'm hoping that after 9.0 is out
Hello,
I didn't find much about jails v2 + epair + vimage on google; The
FreeBSD wiki pages concerning this subject seem fairly outdated (that or
not much has happened in 3 years), and the manpages don't mention much
about vimage/vnet.
According to http://ivoras.net/freebsd/freebsd8.html it
On 02/03/12 17:02, Devin Teske wrote:
Please give this a try:
http://druidbsd.sf.net/vimage.shtml
http://druidbsd.sf.net/download.shtml
Hi,
Interesting.
Is it safe to run in production (VIMAGE/vnets) ?
___
freebsd-questions@freebsd.org mailing
# make install clean
=== License check disabled, port has not defined LICENSE
= ifstated-4.7.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
= Attempting to fetch
http://christianserving.org/ports/net/ifstated/ifstated-4.7.tar.gz
ifstated-4.7.tar.gz 100% of
Bill Moran wrote:
In response to jdow [EMAIL PROTECTED]:
From: Bill Moran [EMAIL PROTECTED]
Dak Ghatikachalam [EMAIL PROTECTED] wrote:
I am confused 2 posters have told me that I am top posting ,
What do we mean by top-posting
Noah wrote:
Hi there,
some flavors of linux place php/ini in /usr/local/lib. I am wondering
if there is a web page and/or document that describes the convention
and importance of placing config and ini files in /usr/local/etc
cheers,
Noah
Hellom
Reuben A. Popp wrote:
Hello everyone,
I have set up a few parameters in a few classes in login.conf and reran
cap_mkdb /etc/login.conf, but some things don't seem to work.
For example, I have the default class configured with idletime=20, but I have
users able to login and stay in
Wojciech Puchar wrote:
Err, sure; and for completeness, be sure and send the IP back to this
list, and publish it on the front page of your website/blog/whatnot.
and what if i will? do you know my root password?
OK, cynicism aside, why on earth would you want to do this? That's a
fool's
Sergio Lenzi wrote:
Hello...
I see you issues about telenet...
I use the inetd+telnet for more than 20 years and using BSD
with RSA, and obviiously with a good password.
I have never been cracked down...
and I have 10 of my /etc/ttys entries setted to secure
ttyp0 none
In my experience, games on FreeBSD are always slow, my hardware isn't very
fast (900MHz, 384MB RAM,Geforce FX5200) but on windows 2000 I'm able to
play even fairly recent games (Such as the punisher, civ4).
On FreeBSD, anything with more graphics than rogue will be anything from
slow to
Wojciech Puchar wrote:
different file systems, etc...
I think you want to look into ZFS then, available on current.
ZFS is not a distributed filesystem AFAIK
___
freebsd-questions@freebsd.org mailing list
Rem P Roberti wrote:
I have been browsing the ports collection for some mp3/ipod management
software, but am unsure as to what is the best choice. Could I get a
couple of recommendations.
Thank you.
Rem
___
freebsd-questions@freebsd.org mailing list
Chuck Robey wrote:
I have spent all the time I can stand, going over the ps man page, but
I can't see any option to get a hierarchical listing. I mean, where
the listings are sorted to where parents come before children, and the
children get indentation, so you can see at a glance what's
Hello,
I've set up a local cvsup mirror for a freebsd server farm but I'm
having some trouble making it work.
I went with all the defaults on the install, only skipping gnats www and
mail.
The initial update went well, took awhile but I have all files in place now.
However, when
Hugo Silva wrote:
Hello,
I've set up a local cvsup mirror for a freebsd server farm but I'm
having some trouble making it work.
I went with all the defaults on the install, only skipping gnats www
and mail.
The initial update went well, took awhile but I have all files in
place now
Anjang Aki wrote:
Hi! Can I know what is this flag after 6.2-RELEASE meaning?
$ uname -r
6.2-RELEASE-p7
How come my box doesn't have the flag?
$ uname -r
6.2-RELEASE
if this is mean kernel updating/compiling hopefully someone can link
me to the URL guide to upgrade my box.
Thank you and
Jacob Yocom-Piatt wrote:
lo all,
have a freebsd 7.0-beta4 machine attached to an external disk
enclosure and would like feedback on the following setup: have RAID-Z
on 4 disks, ZFS volume that takes up entire RAID-Z, use ZVOL from
volume for encryption via geli, use .eli (decrypted) device
Nikos Vassiliadis wrote:
On Wednesday 25 July 2007 20:50, Momchil Ivanov wrote:
На Wednesday 25 July 2007 19:38:41 Zbigniew Szalbot написа:
Dear all,
Is there a tool similar to top which would measure system load and
write it to a file that could later be analyzed? The time when my
Reinhold wrote:
Hi
I am having some problems with apache22 on my box. What happens is, when
I'm viewing loads and loads of pages, apache will stop responding untill I
restart it again. This normally happens when the free memory shown by top
gets to about +- 100MB.
Here is my dmesg output:
Reinhold wrote:
On Thu, August 16, 2007 20:16, Hugo Silva wrote:
Reinhold wrote:
Hi
I am having some problems with apache22 on my box. What happens is,
when I'm viewing loads and loads of pages, apache will stop responding
untill I restart it again. This normally happens when
brad clawsie wrote:
hi
while sitting at my computer tonight i noticed a great deal of disk
activity. i found that this process was running:
$ ps -auxwww 1463
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 1463 4.3 0.1 1876 1404 ?? D 3:01AM 0:07.26 find
DSA - JCR wrote:
Hi all again
I had twice strange messages in the terminal of my FreeBSD 6.2 box. The
messages are:
info:[drm] setting GART location based on old memory map
info:[drm] loading R200 Microcode
info:[drm] writeback test succeeded in 1usec
It seems something about memory, but I
Eduardo Viruena Silva wrote:
Hi Guys,
I have installed FreeBSD 6.2-STABLE in my computer,
I also compiled and installed Xorg 7.2, KDE, and beryl,
everything seems to be ok.
Ok, now what?
What do I have to do for KDE has the beryl effects?
Any reference?
Thanks in advance.
Tom Evans wrote:
On Fri, 2007-06-15 at 21:49 +0200, Wojciech Puchar wrote:
UFS and future derivatives are here to stay.
Yeah, but you know because of how nice ZFS is, a concept of using ZFS
for /home and UFS for everything else will probably turn into a
if ZFS will really
Hi list,
I've been using FreeBSD on the desktop for several years now without any
major problems. However, as of lately, I've been running into a very
annoying problem. I'll try to explain:
I play some OpenGL games on FreeBSD and have always played them without
trouble. However, now I can't
jekillen wrote:
On May 19, 2006, at 10:00 AM, Hugo Silva wrote:
Hi list,
I've been using FreeBSD on the desktop for several years now without
any major problems. However, as of lately, I've been running into a
very annoying problem. I'll try to explain:
I play some OpenGL games
Hugo Silva wrote:
jekillen wrote:
On May 19, 2006, at 10:00 AM, Hugo Silva wrote:
Hi list,
I've been using FreeBSD on the desktop for several years now without
any major problems. However, as of lately, I've been running into a
very annoying problem. I'll try to explain:
I play some
Hello,
I am planning to deploy a server that will make use of hardware RAID
(10). However, I don't mess with RAID+FreeBSD for quite some years now,
so I don't know which adapter(s) are currently the most stable and best
supported. What I would like are opinions and experiences from people
Hi,
I'm experiencing some problems while attempting to export a ZVOL with
ggated on a gigabit network.
All servers are running FreeBSD 7.0-RC1 on amd64, and using bce NICs.
client# ggatec create -t 6 -u 0 172.16.100.200 /dev/zvol/storage/vol0
client# ls -l /dev/ggate*
crw-r- 1 root
Andreas Davour wrote:
I have begin to find it annoying that when I have a Firefox running
with a page with a youtube link it it, I can't at the same time play a
mp3 file with mplayer. When I try I get an error saying that /dev/dsp
is busy. Is there a way to make it play me some music anyway?
Hi list,
syslog-ng2 [2.0.3] from ports is hanging on me after minutes of usage
with state ptsopn:
5507 root1 50 12832K 1788K ptsopn 1 0:07 0.00% syslog-ng
This happens 5-10 minutes after I restart it, or about 3 days if I
restart the server and let it run.
Running on
deepcore wrote:
chown is in /usr/sbin/
ok. I get that, and i found it
I can, however not execute it.
whenever i go to the usr/sbin and type chown i get
chown: Command not found.
i find this pretty strange as ls -l shows:
-r-xr-xr-x 1 root wheel 6688 Jan 12 2007 chown
shouldn't
Ivaylo Bonev wrote:
I want to use FreeBSD 7.0 for Backup server. After little searching,
my decision was to use Bacula (because of Windows client). After
installation of latest version (Bacula 2.4.0) and active googling,
reading very carefuly Onlamp article of Bacula server on FreeBSD
Jakub Lach wrote:
Hello.
I recently installed from ports (games/linux-enemyterritory).
At first it complained about missing X11 lib, and I concluded
that installing linux-xorg-libs should sort it out. I wass correct
(perhaps it should be added as dependency?).
Running et it gives:
[EMAIL PROTECTED] wrote:
show engine innodb status;
ERROR 1235 (42000): Cannot call SHOW INNODB STATUS because skip-innodb is
defined
How do I get InnoDB working ? please help !!
___
freebsd-questions@freebsd.org mailing list
Chad Gross wrote:
On 12/14/06, Fabian Keil [EMAIL PROTECTED] wrote:
Erik Norgaard [EMAIL PROTECTED] wrote:
I have been thinking to make /home on my laptop encrypted - seems
like a
good idea if it gets stolen. Now, how safe is this? Not in terms of
the
strength of the encryption
Hi list,
I'm experimenting with OpenBSM and I'm stuck on something. I've read the
manpages and the handbook section related to it, so either I'm missing
something obvious, or it doesn't work properly yet.
audit_control (relevant part):
flags:+all,-all:no
naflags:lo
audit_user:
Hello everyone,
A couple of days ago I contacted percona
(http://www.percona.com/software/percona-server) about the possibility
of them maintaining a port of the XtraDB server cluster software.
Their reply was that they didn't see too many downloads for *BSD
platforms and they've taken
Hi all,
I've been searching for a working solution to use audio+video and sip on
FreeBSD. So far the webcam is working with webcamd's/v4l help and that's
a good start.
I tried linphone and ekiga3, neither of which worked (both ports are
outdated as well). There are instructions to build ekiga4
On 01/03/13 04:19, Joseph Olatt wrote:
I've been trying to get baresip to work on my FreeBSD 9.x laptop and
haven't had much success. I register successfully to callcentric.com and
it appears that I can connect and there is a stream of data coming
through based on the status display:
82 matches
Mail list logo
