Hi,
I am having trouble configuring an OSA port using OSA/SF.
We have OSA Express2 1000Base cards. One port is defined as ICC (OSC) and the
other as OSE.
We would like to share the OSE port between all the LPARs defined on the
computer and be used for SNA as well as TCP/IP.
Each LPAR has
John
Yes, it's confusing but then it's IBM!
The DYNAMICXCF parameter of the IPCONFIG statement was originally set up
as a way of creating an interface connected to a sort of LAN switch
managed by the sysplex logic so that an interface in a Communications Server
(CS) IP instance in one sysplex
Actually, I don't think the Standard has much opinion on the entire BLOCK
CONTAINS clause. The fact is that MOST existing conforming COBOL
compilers run in environments where blocking doesn't exist any more. For
most conforming compilers, this phrase is documented as syntax checked but
has no
Gadi
This looks like a problem for IBM to solve.
It was back in 2001 when I last busied myself with the use of OSA/SF for the
purposes of performing configurations - as opposed to simply retrieving
information from OSA storage. However I do remember spending a lot of time
getting to grips
The new Apache-based IBM HTTP Server for z/OS (i.e. IBM HTTP Server V7.0
for z/OS) is available at no additional charge to every z/OS customer. FMID
is HHAP700. The http://www.oss4zos.org site has a good write-up on the
front page: click on Apache HTTP Server.
To add to the list
CICS
Can you CONFIG OFF/ON the OSA chpid?
Fermat
2009/5/19 גדי בן אבי gad...@malam.com
Hi,
I am having trouble configuring an OSA port using OSA/SF.
We have OSA Express2 1000Base cards. One port is defined as ICC (OSC) and
the other as OSE.
We would like to share the OSE port between all
IMHO you should review whole process of setup OSA/SF. You have to
allocate *and edit* some datasets. You also have to set up APPC.
At the end you have to customize and start OSASF started task.
--
Radoslaw Skorupka
Lodz, Poland
--
BRE Bank SA
ul. Senatorska 18
00-950 Warszawa
www.brebank.pl
On Mon, 18 May 2009 16:02:56 -0400, Lizette Koehler
stars...@mindspring.com wrote:
However, if you are going to put on RACF Data Base on one Mod27 - nothing
else on that volume, then some might question the waste of space. I am
sure there is a balance to those issues.
Not knowing the
I've done that several times.
The APPC part is active.
I can even use the Java GUI
Some parts, like the get_config option, work, others, like the get_oat do not.
Gadi
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
R.S.
Sent: Tuesday,
On Monday 18 May 2009, Rob Scott wrote:
SYS1.MODGEN(IRACCT)
Thanks -- that's exactly what I was looking for; even though,
as Mark pointed out a few minutes later, it's not officially considered
GUPI.
Cheers,
Bob
--
Bob Woodside
Woodsway Consulting, Inc.
www.woodsway.com
On Monday 18 May 2009, Mark Zelden wrote:
On Mon, 18 May 2009 08:43:56 -0400, Bob Woodside ibm...@woodsway.com
wrote:
Can anyone tell me where the SRM CPU Management Control
Table (CCT) layout is documented?
[ snip ]
I don't really want to include examples that I
I want to say that it was a late version of OS/390. v2.9?? v2.10??
But, I don't know for sure.
All the best,
Scott T. Harder
On 5/18/09, David Speake david.spe...@bcbssc.com wrote:
Does anyone know when the I - Info line command on DSLIST started supporting
VSAM. I have been using ISPF
Jan MOEYERSONS pisze:
On Mon, 18 May 2009 16:02:56 -0400, Lizette Koehler
stars...@mindspring.com wrote:
However, if you are going to put on RACF Data Base on one Mod27 - nothing
else on that volume, then some might question the waste of space. I am
sure there is a balance to those issues.
Timothy Sipples pisze:
The new Apache-based IBM HTTP Server for z/OS (i.e. IBM HTTP Server V7.0
for z/OS) is available at no additional charge to every z/OS customer. FMID
is HHAP700. The http://www.oss4zos.org site has a good write-up on the
front page: click on Apache HTTP Server.
To add to
For all the MCS consoles in a Sysplex we have the LOGON(AUTO) parameter
set on all Lpars. When issuing the D C command on various Lpars the
display shows LOGON=OPTIONAL for some systems. The display is
reflected correctly for the Lpars own consoles, ie. the consoles defined
on the system where the
I am getting ready to write a usermod to rename a module that has an
alias.
Do you have to do a ++RENAME to both the module and then for its
alias? The manual is not helping me understand that.
Do you want to rename the alias as well as the load module? If you want
to keep the same alias,
Check SETSYS UNITNAME
SETSYS MIGUNITNAME
SETSYS TAPEMIGRATION
Also check for DSN/UNIT overrides in your tape management subsystem.
I would also suggest you turn on DUPLEXING, as opposed to TAPECOPY.
HTH,
snip
After many years I have finally convinced management (or more
Perhaps related to OA28541?
To: IBM-MAIN@bama.ua.edu
Subject: Display Console message confusing in a SYSPLEX, e.g LOGON(AUTO)
For all the MCS consoles in a Sysplex we have the LOGON(AUTO) parameter
set on all Lpars. When issuing the D C command on various Lpars the
display shows LOGON=OPTIONAL
Some (most?) OSA adapter cards cannot be used for both ICC and OSE. That is, if
one port is set up as ICC, the other port is unusable.
At least that is what we have been told.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
??? ?? ???
I can't access IBMLink through the web this morning. Any one else?
Greenscreen works, as usual.
Alan
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the
Anybody else? . 504 Gateway Time-out
James (Jim) Chappell
503 745-7841
503 349-5603(cell)
james.chapp...@daimler.com
Daimler Trucks North America LLC
If you are not the intended addressee, please inform us immediately that you
have received this e-mail in error, and delete it. We thank
I'm in - first try.
Alan Schwartz
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Jim Chappell
Sent: Tuesday, May 19, 2009 8:43 AM
To: IBM-MAIN@bama.ua.edu
Subject: IBMLINK -- AGAIN?
Anybody else? . 504 Gateway Time-out
James
Works for me just fine.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Jim Chappell
Sent: Tuesday, May 19, 2009 9:43 AM
To: IBM-MAIN@bama.ua.edu
Subject: IBMLINK -- AGAIN?
Anybody else? . 504 Gateway Time-out
James (Jim) Chappell
I'm in too.
--
John McKown
Systems Engineer IV
IT
Administrative Services Group
HealthMarkets(r)
9151 Boulevard 26 * N. Richland Hills * TX 76010
(817) 255-3225 phone * (817)-961-6183 cell
john.mck...@healthmarkets.com * www.HealthMarkets.com
Confidentiality Notice: This e-mail message may
-Original Message-
From: IBM Mainframe Discussion List [On Behalf Of Field, Alan C.
I can't access IBMLink through the web this morning. Any one else?
Logged on about 0600 (CDT); still working fine for me.
-jc-
Thanks - unfortunately I can't read the apar without logging in. Do you have
details of the apar?
Allan
-Ursprüngliche Nachricht-
Von: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] Im Auftrag von
Field, Alan C.
Gesendet: Dienstag, 19. Mai 2009 15:28
An:
ERROR DESCRIPTION:
When no specific LOGON attribute has been specified on the
CONSOLE statement for a console, LOGON=OPTIONAL may appear in
message CNZ4100I in response to a DISPLAY CONSOLES command
regardless of the LOGON attribute specified for the DEFAULT
statement in CONSOLXX.
This
Hal,
While I'm not sure what an OSE is, I'm pretty sure that your comment
about if one port is set up as ICC, the other port is unusable is
incorrect. According to the OSA/ICC user's guide, you define an ICC as
type OSC in the HCD. That being the case, we have 2 OSA-Express cards
in our z9BC.
Hal Merritt pisze:
Some (most?) OSA adapter cards cannot be used for both ICC and OSE. That is, if one port is set up as ICC, the other port is unusable.
At least that is what we have been told.
It's plain wrong.
Gadi described the card: OSA-Express2 1000BaseT. Such card can be used
as OSE
On Thu, 14 May 2009 14:11:48 -0700, Edward Jaffe
edja...@phoenixsoftware.com wrote:
Mark Zelden wrote:
I don't see any mention of 64-bit common storage in the Extended
Addressability Guide for z/OS 1.10 . It doesn't document what a 64-bit
address space looks. Am I missing a more current
Can you point me to a pub number?
Thanks!!
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Pommier, Rex R.
Sent: Tuesday, May 19, 2009 9:29 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Problem configuring OSA express card using OSA/SF
Hal,
If I understand DASD correctly, our mainframe dasd is carved out of the EMC
storage (or whomever) array. This dasd lays virtually across multiple disks
in the storage array depending on its RAID configuration. And you may or
may not use BCV or PAV.
I am currently working with a DMX4500 storage
The DevPartner web page does include a link to Xpediter, but it's only there to
provide quick access to mainframe debugging product information from the
distributed debugging product section of Compuware.com.
The Xpediter family of products is not part of the divestiture.
Tyler Allman -
Rex
While I'm not sure what an OSE is, ...
OSE seems to be defined as non-OSD!
Here's your reference for OSA CHPID types:
http://www.redbooks.ibm.com/Redbooks.nsf/RedbookAbstracts/tips0088.html
Actually OSN is missing, the CHPID type used to support CCL pretending to be
a channel-attached
Brad,
I have seen some responses to your question, which raised questions.
I will ignore the RVA, which works differently with its virtualisation.
The latest DASD does reserve all the space for a specified volume. So
allocating a 1 cylinder data set on a mod 27 would waste nearly all
Help;
I have written a called Assembler subroutine that performs a LOAD for a table
member for COBOL programs. My subroutine is assembled and linked with RMODE 24
and AMODE ANY and most of the table members are linked with RMODE 31 AMODE 31.
The problem arises when my subroutine is called by a
Ray,
Did you read the answer I posted for you. on the assembler LISTSERV? IBM
provided for this very issue with IARVSERV.
Tom Harper
IMS Utilities Development Team
Neon Enterprise Software
Sugar Land, TX
- Original Message -
From: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
To:
Terry Draper wrote:
Brad,
I do not think EMC have HIPERPAVs and do not know if they have committed to them and if so when.
I think I would play safe for your new environment and put busy system data sets on smaller models than 27.
EMC has support for HiperPAV. This has been around for
Well, this does not seem to be the explaination to our situation.
- none of the systems in the sysplex are running 1.10 yet.
- LOGON(AUTO) is explicitly set for all MSCs in all the console members
- the D C command shows different results regarding LOGON= when issued from
different Lpars. For
Hal,
Here are a couple. SA22-7990 is the OSA/ICC User's Guide, SA22-7935 is
the OSA-Express customer guide and reference. I pulled these from the
z/OS 1.7 document CDs so I don't have a URL for them.
In addition is the Redbook that Chris pointed out.
Rex
-Original Message-
From: IBM
After you made the change in CONSOLxx to LOGON(AUTO) was there a plex wide IPL?
IIRC CONSOLxx definitions are plex wide so a member entering the plex will use
a 'cached' version which may be different than you expect.
You should be able to dynamically alter to LOGON(AUTO) then as long as
But my question is why create a 3390-1 for each of the individual data
sets, like RACF db, Jes checkpoint, etc when I can create a 3390-27
(specifically 30015 cylinders) and use PAV's. Shouldn't that give me
the same functionality without having to manage a bunch of small
volumes?
Brad Wissink
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Baraniecki, Ray
Help;
I have written a called Assembler subroutine that performs a LOAD
for a table member for COBOL
programs. My subroutine is assembled and linked with RMODE 24 and
AMODE ANY and most of the
Is there a way of having the NUMBER OF RECORDS PROCESSED
displayed in the output of the job when an IMPORT function is performed? The
record count for the EXPORT is posted. Here is my jcl:
//STEPC EXEC PGM=IDCAMS,REGION=2048K,COND=(0,NE)
//SYSPRINT DD SYSOUT=*
In a message dated 5/19/2009 9:43:03 A.M. Central Daylight Time,
hmerr...@jackhenry.com writes:
Can you point me to a pub number?
I like Redbook SG24-5948. If you search _www.redbooks.ibm.com _
(http://www.redbooks.ibm.com )
you'll see a few other TIPS that include Quick starts for VM
I will investigate this. Where can I find information.
Thanks,
Ray Baraniecki
Morgan Stanley GWMG
18th Floor
1 New York Plaza
New York, NY 10004
Office - 212-276-5641
Cell - 917-597-5692
ray.baranie...@morganstaley.com
BE CARBON CONSCIOUS. PLEASE CONSIDER OUR ENVIRONMENT
I cannot control where the table is loaded. Or can I?
Thanks,
Ray Baraniecki
Morgan Stanley GWMG
18th Floor
1 New York Plaza
New York, NY 10004
Office - 212-276-5641
Cell - 917-597-5692
ray.baranie...@morganstaley.com
BE CARBON CONSCIOUS. PLEASE CONSIDER OUR ENVIRONMENT
-Original Message-
From: IBM Mainframe Discussion List
[mailto:ibm-m...@bama.ua.edu] On Behalf Of Chase, John
Sent: Tuesday, May 19, 2009 11:38 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: AMODE Switching
snip
Why can't you just LOAD the table into below-the-line storage? That
Thanks.
But I see from the other replies that I was correct: OSA cards vary in their
capabilities. Exactly what a given card can and cannot do depends on a number
of factors.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Pommier,
Rex - and Hal
Actually, it was a summary sheet, a redtip, rather than a redbook or even a
redpaper.
I imagined that Hal wanted a reference indicating that OSC and OSE (or OSD)
could be combined.
I had a quick look in the two manuals you mentioned but couldn't find any
specific statement on
McKown, John wrote:
-Original Message-
From: IBM Mainframe Discussion List
[mailto:ibm-m...@bama.ua.edu] On Behalf Of Chase, John
Sent: Tuesday, May 19, 2009 11:38 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: AMODE Switching
snip
Why can't you just LOAD the table into below-the-line
Baraniecki, Ray wrote:
I cannot control where the table is loaded. Or can I?
BLDL. Then fiddle with the AMODE. Then LOAD DE=?
--
Edward E Jaffe
Phoenix Software International, Inc
5200 W Century Blvd, Suite 800
Los Angeles, CA 90045
310-338-0400 x318
edja...@phoenixsoftware.com
Joel
We're in need of migrating our transitioned objects to a
better-performing
platform than the 3995. Unfortunately OAM doesn't support transitioning
objects to (non-DB2) dasd. Our other option is our VTS. Are there any
shops that have migrated all their 3995 objects to another platform
On Tue, 19 May 2009 10:57:43 -0600, Steve Comstock wrote:
* LOAD the table; R1 has address, R0 has size in doublewords
* Get storage below the line using the R0 value * 8
* Copy the table to your gotten storage
... being careful along the way to update any relocatable internal
pointers the table
If you are passing the address of the LOADed table to other modules somehow,
then you can do the following:
LOAD the module into wherever the LOAD service chooses to put it. If the
caller is mode 24, then: (1) save the length of the module, which is returned
in R0 (or maybe R1; read the doc);
-Original Message-
From: IBM Mainframe Discussion List
snip
* LOAD the table; R1 has address, R0 has size in doublewords
* Get storage below the line using the R0 value * 8
* Copy the table to your gotten storage
Kind regards,
-Steve Comstock
Relocate ADCONS, how? I've had
Chris,
Thanks for the info. I'll direct my attention to setting up Enterprise
Extenders for both LPARs.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Chris Mason
Sent: Monday, May 18, 2009 11:17 PM
To: IBM-MAIN@bama.ua.edu
Subject:
McKown, John wrote:
-Original Message-
From: IBM Mainframe Discussion List
snip
* LOAD the table; R1 has address, R0 has size in doublewords
* Get storage below the line using the R0 value * 8
* Copy the table to your gotten storage
Kind regards,
-Steve Comstock
Relocate ADCONS,
On Tue, 19 May 2009 10:07:56 -0500, Wissink, Brad [ITSYS]
bjwi...@iastate.edu wrote:
But my question is why create a 3390-1 for each of the individual data
sets, like RACF db, Jes checkpoint, etc when I can create a 3390-27
(specifically 30015 cylinders) and use PAV's. Shouldn't that give me
the
I'm reading the paper about IBM's plans for the 64-bit common (HVCOMMON?). And
I'm really beginning to wonder about something. What this will do is create
another block of storage which is mapped into every address space. I am curious
why IBM has not considered using AR mode and a SCOPE=GLOBAL
On Tue, 19 May 2009 13:43:20 -0500 McKown, John jmck...@healthmarkets.com
wrote:
:I'm reading the paper about IBM's plans for the 64-bit common (HVCOMMON?).
And I'm really beginning to wonder about something. What this will do is create
another block of storage which is mapped into every
-Original Message-
From: IBM Mainframe Discussion List
snip
Unless there has been a change, dataspaces are limited to 2G.
Takes a lot of
dataspaces to map 100G. And one must screw around with a lot of ALETs.
But I am glad some people are considering VSCR for 64 bit storage.
On Mon, 18 May 2009 10:03:22 -0600, Howard Brazee
howard.bra...@cusys.edu wrote:
...
My age only matters of one thing - if I wanted to retire today, I'd
get my pension.
...
Really? My knees envy you.
But getting back to the memory lane slide show, I'm a bit surprised
the 650 is not included.
McKown, John wrote:
Is AR mode that much more difficult / restrictive than AMODE(64)?
Most HLL have no support for data spaces.
--
Edward E Jaffe
Phoenix Software International, Inc
5200 W Century Blvd, Suite 800
Los Angeles, CA 90045
310-338-0400 x318
edja...@phoenixsoftware.com
New data on Mainframe Computers in the last day:
The Reality Facing the Mainframe
Worldhttp://go.techtarget.com/r/6966142/6153081/1?kasid=1235152549263
PUBLISHER: Acxiom Corporation
TYPE: White Paper
John
--
For IBM-MAIN
John,
One problem with this type of dataspace is that there isn't a standard
method to own pieces of dataspace storage. Dataspaces don't have FQE's,
DQE's and FBQE's, or the control blocks that manage 64 bit memory objects,
so how do you advertise that this piece of the dataspace contains your
John,
IIRC the addition of HVCOMMON is due to customer requests for it - for some
maybe the setup required and usage for shared memobjs must have been too
difficult to implement.
I would also guess that using any non-primary mode and a special ALET is not
going to be very popular as there
Have a question ...
Just trying Shared Spool between (2) lpars..(A) and (B) lpars
Have a NJE connection from (T) lpar to (A)...
I route a output from (T) lpar to (A)lpar... I cannot see the out unless I
do a ST command in SDSF ... ?
and
The output does not retain it's original owner
On Tue, 19 May 2009 10:57:43 -0600, Steve Comstock wrote:
* LOAD the table; R1 has address, R0 has size in doublewords
* Get storage below the line using the R0 value * 8
* Copy the table to your gotten storage
Instead of copying it, use IARVSERV to map it below the line.
--
Tom Marchant
On Tue, 2009-05-19 at 15:07 -0400, Eatherly, John D[EQ] wrote:
TYPE: White Paper
Requires detailed registration to read it. Have to pass, thanks.
--
David Andrews
A. Duda and Sons, Inc.
david.andr...@duda.com
--
For IBM-MAIN
Sorry. I didn't realize it. I didn't have to.
Thanks
John
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at
On Tue, 19 May 2009 08:37:47 -0500, Field, Alan C.
alan.c.fi...@supervalu.com wrote:
I can't access IBMLink through the web this morning. Any one else?
Greenscreen works, as usual.
...
This was a test. They are making sure they are ready to support
the sunsetting of Green Screen access.
You can also find a copy of this white paper here: (watch the wrap)
http://www.acxiom.com/SiteCollectionDocuments/website-resources/pdf/White_Papers/AC-2011-08%20The%20Relaity%20Facing%20The%20Manframe%20World.pdf
George Shedlock Jr
AEGON Information Technology
AEGON USA
502-560-3541
TYPE: White
John
Here's some samples to get you started taken from some definitions I set up
for a customer last year:
Sample Enterprise Extender Major Node
-
VBUILD TYPE=XCA
name PORT MEDIUM=HPRIP, enterprise extender *
Did following in SDSF to see it correctlybut how can I make this a
default function not understanding??
/$tjnn,sysaff=(*,ind)
- Forwarded by Ron Wells/AGFS/AGFin on 05/19/2009 02:54 PM -
Ron Wells/AGFS/AGFin
05/19/2009 02:10 PM
To
IBM Mainframe Discussion List
On Tue, 19 May 2009 14:40:02 -0500, Shedlock, George
gshedl...@aegonusa.com wrote:
You can also find a copy of this white paper here: (watch the wrap)
http://www.acxiom.com/SiteCollectionDocuments/website-
resources/pdf/White_Papers/AC-2011-08%20The%20Relaity%
* LOAD the table; R1 has address, R0 has size in doublewords
* Get storage below the line using the R0 value * 8
* Copy the table to your gotten storage
Instead of copying it, use IARVSERV to map it below the line.
--
Tom Marchant
Surely, if the table has internal pointers (adcons), these
On Mon, 18 May 2009 11:03:05 -0500, Paul Gilmartin
paulgboul...@aim.com wrote:
On Mon, 18 May 2009 17:48:44 +0200, Gilbert Saint-Flour wrote:
On Friday 15 May 2009 04:47, Clark Morris wrote:
I submitted a SHARE requirement back in the 1990's to have
a compile option that the default be
could it be something in isfparms for sdsf??
- Forwarded by Ron Wells/AGFS/AGFin on 05/19/2009 03:53 PM -
Ron Wells/AGFS/AGFin
05/19/2009 02:56 PM
To
IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
cc
Subject
Fw: JES2-Share Spool
Did following in SDSF to see it
The following message is a courtesy copy of an article
that has been posted to bit.listserv.ibm-main,alt.folklore.computers as well.
patrick.oke...@wamu.net (Patrick O'Keefe) writes:
But getting back to the memory lane slide show, I'm a bit surprised
the 650 is not included. It may not have
On Mon, 18 May 2009 13:08:28 -0500, John McKown joa...@swbell.net
wrote:
I just ran a quick test using Enterprise COBOL 3.4.1. I had one input FD and
three output FDs. The output FDs were: (1) No BLOCK CONTAINS at all; (2)
BLOCK CONTAINS 0 RECORDS; and (3) BLOCK CONTAINS 1 RECORDS. I
directed
On Mon, 18 May 2009 16:07:12 -0500, Paul Gilmartin
paulgboul...@aim.com wrote:
Is default unblocked an ANSI Standard requirement? (Of course
this doesn't preclude an extension implemented via compiler
option.)
From the 2002 standard (I don't have the 1985 standard):
On Mon, 18 May 2009 23:00:02 -0500, Bill Klein wmkl...@ix.netcom.com
wrote:
Ted,
The issue that I think you are missing is that this entire conversation
started with a site trying to do a VSE to z/OS conversion. For this site,
this is a major concern. Certainly not the only one, but it is
Hi,
Anyone know of an APAR for this or a documented migration action or existing
toleration service?
This tip was passed along from another account but I would expect this should
have resulted in an APAR to prevent the storage exhaustion or one to prevent
the activation in a mixed complex.
Some further comments on Chris Craddock's comments:
1) The LSEXPAND macro instruction takes the form
| LSEXPAND normal=n,recovery=r
where
96 n = 16000,
24 r = 4000
the first time the macro is used and
n(i-1) n(i) = 16000,
r(i-1) r(i) = 4000
the i-th time, i 1, it is
OA28998
Terry Traylor
charlesSCHWAB
TIS Mainframe Storage Management
Remedy Queue: tis-hs-mstg
(602) 977-5154
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Knutson, Sam
Sent: Tuesday, May 19, 2009 2:48 PM
To: IBM-MAIN@bama.ua.edu
Exactly right two monoplex LPARS.
In my situation on
LPAR 1 DB2PROD.SDSNLOAD is cataloged on SYS033
LPAR 2 DB2PROD.SDSNLOAD is cataloged on SYS033
On LPAR 1, I copied a load module from DSN910.SDSNLOAD to the DB2PROD.SDSNLOAD
library.
On LPAR 2, I could not see the updated load module
On 19 May 2009 12:26:54 -0700, in bit.listserv.ibm-main you wrote:
On Tue, 19 May 2009 08:37:47 -0500, Field, Alan C.
alan.c.fi...@supervalu.com wrote:
I can't access IBMLink through the web this morning. Any one else?
Greenscreen works, as usual.
...
This was a test. They are making sure
On Tue, 19 May 2009, Longnecker, Dennis wrote:
Exactly right two monoplex LPARS.
In my situation on
LPAR 1 DB2PROD.SDSNLOAD is cataloged on SYS033
LPAR 2 DB2PROD.SDSNLOAD is cataloged on SYS033
On LPAR 1, I copied a load module from DSN910.SDSNLOAD to the
DB2PROD.SDSNLOAD
Read/write sharing of PDSEs between z/OS images not in the same sysplex is
incredibly dangerous, and very much not supported. What happens when you
do share read/write between PDSEs is undefined; if you're lucky, you can
recover, if you aren't, you have to restore the dataset from backup.
Frank Swarbrick fswarbr...@gmail.com wrote in message
news:listserv%200905191643164240.0...@bama.ua.edu...
snip
By the way, any pointers on how to submit a marketing requirement? VSE
actually has a submit a requirement web page (https://www-
--snip---
Surely, if the table has internal pointers (adcons), these will still
point above the line and thus be unusable in AMODE 24?
--unsnip---
I've never tried it,
Sam,
I do not believe that r12 of CA Common Services is GA at this time, but will
be later this year. I did verify that they are changing the way that modules
are dynamically added to LPA to use the supported interface. One advantage
we have is that since most CA products use CA Common Services
93 matches
Mail list logo
