quot; <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Saturday, August 16, 2003 2:56 PM
Subject: Re: [PEDA] Analysing...
> > Or, improve on the motherboard chipset heatsink. This problem only
> reveals
> > itself in the warmest of summe
e Screen of
Death didn't get you first! OnNow: an idea whose time has come. And
gone...
Best regards,
Ivan Baggett
Bagotronix Inc.
website: www.bagotronix.com
- Original Message -
From: "Brian Guralnick" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL
I dont know the motherboard specs becouse its a company pc but i will try to keep this
in mind and check it up for all to see.
Choong
Brian Guralnick <[EMAIL PROTECTED]> wrote:
>1. thing I do on occasion, is to save my PCB work in ASCII mode, shut down
>Protel & reboot, then re-load the new ASC
Protel EDA Forum"" <[EMAIL PROTECTED]>
Sent: Saturday, August 16, 2003 3:42 AM
Subject: Re: [PEDA] Analysing...
> Brian,you might be correct with my own pc but we have 4 new Asus equipped
pcs when i joined this company just about 4 months ago and at that time all
our pc's were no
Brian,you might be correct with my own pc but we have 4 new Asus equipped pcs when i
joined this company just about 4 months ago and at that time all our pc's were nothing
but Protel 99se WITH Win98 and XPs licensed version so i think there is no problem
with the master boot record but anyway we
;From: Choong Keat Yian [mailto:[EMAIL PROTECTED]
> >Sent: Sat 02/08/2003 5:49 AM
> >To: "Protel EDA Forum"
> >Cc:
> >Subject: Re: [PEDA] Analysing...
> >
> >
> >
> >You know , i have have my own confusion both self affli
Been there,done that.I even formatted my pc and reinstall it and it still come with
those random Error and "Fatal Attraction" dialoque.Been done with fresh installed
WinXP on 3 other different machine too,its all the same.I have tried to use RegClean
to do the job too,its all the same.There is n
orum"" <[EMAIL PROTECTED]>
Sent: Saturday, August 09, 2003 3:45 PM
Subject: Re: [PEDA] Analysing...
> Mouse software?
>
> Choong
>
> "JaMi Smith" <[EMAIL PROTECTED]> wrote:
>
> >Not to beat a dead horse, but what are you using for mouse soft
No, i dont think that its the mouse as my experience with 99SE is from Win98SE fresh
installation and other existing pcs and also with original licensed WinXP,none of them
use tablets but only normal mouse of differing brands,so i am still waiting for some
miracle answer to this mystery.
Choong
tel EDA Forum"" <[EMAIL PROTECTED]>
>Sent: Saturday, August 09, 2003 3:45 PM
>Subject: Re: [PEDA] Analysing...
>
>
>> Mouse software?
>>
>> Choong
>>
>> "JaMi Smith" <[EMAIL PROTECTED]> wrote:
>>
>> >Not to b
ms.
Best regards,
Ivan Baggett
Bagotronix Inc.
website: www.bagotronix.com
- Original Message -
From: "Choong Keat Yian" <[EMAIL PROTECTED]>
To: ""Protel EDA Forum"" <[EMAIL PROTECTED]>
Sent: Saturday, August 09, 2003 3:50 PM
Subject: Re: [PEDA] Analysing...
&
ot;" <[EMAIL PROTECTED]>
>Sent: Saturday, August 02, 2003 5:49 AM
>Subject: Re: [PEDA] Analysing...
>
>
>> You know , i have have my own confusion both self afflicted and for using
>Protel.,Since i join this company i has been told to use Protel but the fact
>is th
[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Monday, August 11, 2003 11:11 AM
Subject: Re: [PEDA] Analysing...
> Choong:
>
> My suggestions:
>
> 1) You may have a boot sector virus, or perhaps some other wacky software
> has installed dat
d Velander
>
>-Original Message-
>From: Choong Keat Yian [mailto:[EMAIL PROTECTED]
>Sent: Sat 02/08/2003 5:49 AM
> To: "Protel EDA Forum"
>Cc:
>Subject: Re: [PEDA] Analysing...
>
>
>
>You know , i have have my own
TED]
> >
> >
> >- Original Message -
> >From: "Choong Keat Yian" <[EMAIL PROTECTED]>
> >To: ""Protel EDA Forum"" <[EMAIL PROTECTED]>
> >Sent: Saturday, August 09, 2003 3:45 PM
>
4-Aug-2003 04:18 Subject: Re: [PEDA] Analysing...
PM
P
bal.net> cc:
Subject: Re: [PEDA] Analysing...
04-Aug-2003 03:59
Not to beat a dead horse, but what are you using for mouse software?
- Original Message -
From: "Choong Keat Yian" <[EMAIL PROTECTED]>
To: ""Protel EDA Forum"" <[EMAIL PROTECTED]>
Sent: Saturday, August 02, 2003 5:49 AM
Subject: Re: [PEDA] Anal
: Choong Keat Yian [mailto:[EMAIL PROTECTED]
Sent: Sat 02/08/2003 5:49 AM
To: "Protel EDA Forum"
Cc:
Subject: Re: [PEDA] Analysing...
You know , i have have my own confusion both self afflicted and for using
Protel.,Since i
You know , i have have my own confusion both self afflicted and for using
Protel.,Since i join this company i has been told to use Protel but the fact is that
it seem to me Protel's old and new version do not alleviate anything much other than
cosmetic and workaround change as the main sunject m
Ok,
Thanks to all who answered. I think the long term fix is to rip up
the 35 polys, and do it properly by laying keepouts in the right areas and
using as few polys as possible. Pain in the bum, but nicer in the long run.
however, I think with these suggestions, I can wing it unti
me with working on the Pre-Release of SP3 and
> Pre-Release SP3.5 to completely rewrite the whole program from the ground
> up, so it will be interesting to see whether or not this works any better.
>
> It seems that whenever I or someone else really "bad mouths" some issue in
disclose the contents to another person, use
it for any purpose or store or copy
the information in any medium. Thank you.
> -Original Message-
> From: Nick Papas [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, July 30, 2003 1:49 AM
> To: Protel EDA Forum
> Subject: Re: [
Unfortunately I think the answer is "get used to it". The only other way
I k ow would be to reduce the number of ground tracks significantly by
making the polys either a very coarse grid or no fill. basically protel
checks every track and node on a net when you touch it. Normally for
non powe
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, July 30, 2003 12:09 AM
> To: 'Protel EDA Forum'
> Subject: [PEDA] Analysing...
>
>
> Hi all,
> I've just been handed a rather large board with quite a
any better.
It seems that whenever I or someone else really "bad mouths" some issue in
PDXP, that it gives the people in Oz a little extra "incentive" to fix the
problem. Maybe this will have some effect on future releases.
Anyway, by the time you have read this, you will pro
blem.
Please ignore this message once again because I must be lying or something.
_
Brian Guralnick
[EMAIL PROTECTED]
- Original Message -
From: "Terry Creer" <[EMAIL PROTECTED]>
To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
Sent:
I should have added, that it only happens when I edit anything on the GND
net (the net with all the poly's).
BTW, I'm using a P4 1.6 with 390Mb RAM Win 2k etc..etc..
Thanks again,
TC
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
*
Try hiding all nets (Press 'N'ets, 'H'ide, 'A'll)
Regards
Nick Papas
Performance Micro Systems Pty. Ltd.
-Original Message-
From: Terry Creer [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 30 July 2003 09:09
To: 'Protel EDA Forum'
Subject: [PEDA] Anal
Title: RE: [PEDA] Analysing...
Hi, Terry,
Just hide the GND net to avoid annoying "Analysing GND".
Best Regards,
luo.
-Original Message-
From: Terry Creer [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 30, 2003 7:09 AM
To: 'Protel EDA Forum'
Subject: [PEDA
Hi all,
I've just been handed a rather large board with quite a few
individual GND polygons on it (35 to be exact). I've been asked to clean it
up so we can have a prototype made. Every time I make a change to the board,
(ie, move track, delete fill etc..etc..), after the edit, it sits ther
31 matches
Mail list logo