Thank you for your input. I was a little surprised that I didn’t get more
response because of the fact that this was such a hot subject a few months ago.
I’m still looking and I’ll find something that’ll work for me. I’ll take all of
your advice with a lot of value. Thanks so much
You can fill
ssage-
>> From: Tom Hessels
>> Sent: Jun 23, 2019 5:41 AM
>> To: ptaccess@googlegroups.com
>> Subject: RE: Control surface revisited
>>
>> Hi Chad,
>>
>> I have the same problem with fader port 8 with the faders in plug-in mode.
>&g
; Hi Chad,
>
> I have the same problem with fader port 8 with the faders in plug-in mode.
>
> Tom.
>
>
> -Oorspronkelijk bericht-
> Van: ptaccess@googlegroups.com Namens Chad
> Morrison
> Verzonden: zaterdag 22 juni 2019 08:21
> Aan: ptaccess@googleg
-Original Message-
>From: Tom Hessels
>Sent: Jun 23, 2019 5:41 AM
>To: ptaccess@googlegroups.com
>Subject: RE: Control surface revisited
>
>Hi Chad,
>
>I have the same problem with fader port 8 with the faders in plug-in mode.
>
>Tom.
>
>
&g
I have the pre-Sonus fader port eight. So far I have been satisfied with the
results except for controlling plug-in parameters. For some unknown reason the
faders keep resetting themselves when I attempt to adjust parameters.
However, it seems that this problem is isolated to me and most
Hi, not sure if this is what you’re looking for, but I’m very satisfied with my
FaderPort 16. Paired with the plugin monitor in Flo Tools, and by viewing
tracks in groups, I find it easy to work with.
Best,
John André
On 19 Jun 2019, at 20:18, Terry Nord wrote:
Hi everyone,
I know we’ve
do.
-Original Message-
From: Driza aka Adrian
Sent: Sunday, December 04, 2016 1:43 PM
To: ptaccess@googlegroups.com
Subject: Re: control surface question
from the videos I've heard, it does have fader flip mode, and you can have
it hooked up along side with the origianal faderport
from the videos I've heard, it does have fader flip mode, and you can have
it hooked up along side with the origianal faderport as well!
-Original Message-
From: Jed Barton
Sent: Sunday, December 04, 2016 1:16 PM
To: ptaccess@googlegroups.com
Subject: Re: control surface question
3/2016 4:04 PM, Driza aka Adrian wrote:
>> the faderport 8 cost $499.99
>>
>> -Original Message- From: Jed Barton
>> Sent: Saturday, December 03, 2016 2:33 PM
>> To: ptaccess@googlegroups.com
>> Subject: Re: control surface question
>>
>>
Hello Tim
Yes, using the 003. Since my early 2008 Imac has a FireWire 400 port just
using a cable.
And running PT12.6 and I noticed 6.1 came out last Friday.
Take care,
John.
> On Dec 4, 2016, at 10:29 AM, Tim Elder wrote:
>
> Hi John,
>
> Are you using the 003
will it work in conjunction with the other 1
On 12/3/2016 4:04 PM, Driza aka Adrian wrote:
the faderport 8 cost $499.99
-Original Message- From: Jed Barton
Sent: Saturday, December 03, 2016 2:33 PM
To: ptaccess@googlegroups.com
Subject: Re: control surface question
wow, any idea
Hi John,
Are you using the 003 with Pro Tools 12? Are you using a Firewire
adapter? I'm currently running a Command 8 with PT 11, which seems to work
well, but the Command 8 is not officially supported in PT 12. The prices of
used 003 interfaces seems like a great way to get formally
day, December 03, 2016 2:33 PM
> To: ptaccess@googlegroups.com
> Subject: Re: control surface question
>
> wow, any idea on a price for this badboy
>
>> On 12/3/2016 12:10 PM, TheOreoMonster wrote:
>> Looks like they are about to release a 8 motorized fader version of th
the faderport 8 cost $499.99
-Original Message-
From: Jed Barton
Sent: Saturday, December 03, 2016 2:33 PM
To: ptaccess@googlegroups.com
Subject: Re: control surface question
wow, any idea on a price for this badboy
On 12/3/2016 12:10 PM, TheOreoMonster wrote:
Looks like
Will the new fader port 8 have fader flip mode?
Sent from my iPhone
> On Dec 3, 2016, at 4:30 PM, Jed Barton wrote:
>
> ah ok, yea that's the 1 i am thinking of getting. I hear it works really well
>
>> On 12/3/2016 2:40 PM, Jose Neto wrote:
>> Just the single automated
ah ok, yea that's the 1 i am thinking of getting. I hear it works
really well
On 12/3/2016 2:40 PM, Jose Neto wrote:
Just the single automated faderport by presonus.
On Dec 3, 2016, at 12:31 PM, Jed Barton wrote:
what control surface do you have
On 12/3/2016 9:39 AM,
Just the single automated faderport by presonus.
> On Dec 3, 2016, at 12:31 PM, Jed Barton wrote:
>
> what control surface do you have
>
> On 12/3/2016 9:39 AM, JOSÉ NETO wrote:
>> So worth it! it definitely increased my productivity and adds a bit of
>> the fun analog vibe
wow, any idea on a price for this badboy
On 12/3/2016 12:10 PM, TheOreoMonster wrote:
Looks like they are about to release a 8 motorized fader version of the fader
port. Pro Tools expert just did a write up on it that seems pretty detailed
about how it works with Pro Tools if anyone is
what control surface do you have
On 12/3/2016 9:39 AM, JOSÉ NETO wrote:
So worth it! it definitely increased my productivity and adds a bit of
the fun analog vibe to it, and since I work 100% in the box it brakes
it up a bit.. people use it differently, I personally recommend.
Cheers
--
You
Looks like they are about to release a 8 motorized fader version of the fader
port. Pro Tools expert just did a write up on it that seems pretty detailed
about how it works with Pro Tools if anyone is interested.
Are used it for a little while. It was barely worth what I paid for it. I still
have it if you want it.
Ricky Prevatte LMBT1154
> On Nov 15, 2016, at 6:12 PM, Brian Howerton wrote:
>
> Hi folks,
> Just was curious to see if anyone has ever used the presonus fader port
Hello Brian,
I have 1 however it only has 1 fader but when I used it, for the basic 1 fader
works
I don’t use it anymore since I purchased a used Digi 003 almost a year ago.
My wife recorded a layout meaning buttons and if you like, write me off list at
g...@tznet.com
John
> On Nov 15,
Peter I cannot remember are you in the US? Sweetwater sound could guide you
very well for the situation.
Ricky Prevatte LMBT1154
> On Jul 21, 2016, at 3:39 PM, TheOreoMonster wrote:
>
> Not a lot available if you want control surface and interface in one.
> The 003
Not a lot available if you want control surface and interface in one.
The 003 if you can find one though they are nearing end of life as
well. However as a point this doesn't neccessarily mean they will stop
working As a lot of Avid's hardware have a 5 or so year lifespan at
least once avid
have to remember all the keyboard
>>>>>>>> shortcuts.
>>>>>>>>
>>>>>>>> The hot key matrix is a controller that only has buttons and each of
>>>>>>>> pro tools functions are assigned to a button so they ca
on each key along with
>>>>>>>>> the the normal letters of the keyboard. Its basically a cheat sheet
>>>>>>>>> for a sighted person so they won’t have to remember all the keyboard
>>>>>>>>> shortcuts.
>>>>
;>>
>>>>>>>>>>
>>>>>>>>>> You are confusing the Hot Key Metrix with the Editor
>>>>>>>>>> Keys pro Tools keyboard. The Editors Key Pro Tools
>>>>>>>>>> keyboard is a standard computer keyb
8 motorized faders as well as fader flip mode. Like most all in
>>>>> one surfaces I think that the converters and the pres are a little
>>>>> week, but you can expand the converters via light pipe.
>>>>>
>>>>> -Original Message-
torized faders as well as fader flip mode. Like most all in
>>>> one surfaces I think that the converters and the pres are a little
>>>> week, but you can expand the converters via light pipe.
>>>>
>>>> -Original Message-
>>>>
;>>>>>> keyboard with the Pro Tools hotKeys
printed on each key along with
>>>>>>>>> the the normal letters of the
keyboard. Its basically a cheat sheet
>>>>>>>>> for a sighted person so they won’t
have to
;>
>>>>> Does the Digidesign 003 not work with PT12? It has 8 ins, 4
>>>>> preamps, jog wheel, two headphone jacks with separate volume knobs
>>>>> and 8 motorized faders as well as fader flip mode. Like most all in
>>>>> one surfaces I t
:ptaccess@googlegroups.com] On Behalf
>> Of Jed Barton
>> Sent: Monday, November 09, 2015 4:10 AM
>> To: ptaccess@googlegroups.com
>> Subject: Re: Control Surface Recommendations
>>
>> email me off list and tell me more
>>
>> On 11/9/2015 2:59 AM,
the pres are a little week, but you can expand the
>>> converters via light pipe.
>>>
>>> -Original Message-
>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On
>>> Behalf Of Jed Barton
>>> Sent: Monday, November 09, 2
t;> wrote:
>>>>>
>>>>>
>>>>>> Does the Digidesign 003 not work with PT12? It has 8 ins, 4
>>>>>> preamps, jog wheel, two headphone jacks with separate volume knobs
>>>>>> and 8 motorized faders as well as fader flip mode. Li
es I think that the converters and the pres are a little
week, but you can expand the converters via light pipe.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
On Behalf Of Jed Barton
Sent: Monday, November 09, 2015 4:10 AM
To: ptaccess@googlegroups.co
ss@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of
Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice but almost, any of you using or used a
Hotkey Matrix before?
As I understa
a cheat sheet for a
>>>>>>>> sighted person so they won’t have to remember all the keyboard
>>>>>>>> shortcuts.
>>>>>>>>
>>>>>>>> The hot key matrix is a controller that only has buttons and each of
&g
gt;>>> a keyboard of that size.
>>>>>>>>>>>
>>>>>>>>>>> Scott
>>>>>>>>>>>
>>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>>
>>>&
;>>>>>>>>>> There are 8 rows of 18 keys and as far as I know there are no
>>>>>>>>>>> tactile markings so I think it would be real easy to get lost
>>>>>>>>>>> with
>>>>>>>>>>> a keyboard of that size.
&g
;>>>>>>>>> Scott
>>>>>>>>>>
>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>
>>>>>>>>>>> On 2/04/2015, at 11:23 AM, TheOreoMonster
>>>>>&
the converters via light
pipe.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of
Jed Barton
Sent: Monday, November 09, 2015 4:10 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
email me off list and tell me more
>>>>>>> keyboard with the Pro Tools hotKeys printed on each key along with
>>>>>>>>> the the normal letters of the keyboard. Its basically a cheat sheet
>>>>>>>>> for a sighted person so they won’t have to remember all the
>>&
certain keyboard labels? I could be
wrong.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
On Behalf Of Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice but
gt;> keyboard with the Pro Tools hotKeys printed on each key along with
>>>>>>>>> the the normal letters of the keyboard. Its basically a cheat sheet
>>>>>>>>> for a sighted person so they won’t have to remember all the keyboar
eyboard
>>>>>>> shortcuts.
>>>>>>>
>>>>>>> The hot key matrix is a controller that only has buttons and each of
>>>>>>> pro tools functions are assigned to a button so they can be done in a
>>>>>
d labels? I could be wrong.
>>>>
>>>> -Original Message-
>>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On
>>>> Behalf Of Nickus de Vos
>>>> Sent: Wednesday, April 01, 2015 9:02 AM
>>>>
>>>> On Apr 1, 2015, at 2:27 PM, Poppa Bear <heavens4r...@gmail.com> wrote:
>>>>>>
>>>>>> I thought that these were more for sighted folks so that they could just
>>>>>> have a visual aid to be able to use the native Pro Tool
al aid to be able to use the native Pro Tools short cut keys with certain
keyboard labels? I could be wrong.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of
Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subj
could be wrong.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of
Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice but almost, any of you
@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf
Of Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice but almost, any of you using or used a
Hotkey Matrix before?
As I understand
[mailto:ptaccess@googlegroups.com] On
Behalf Of Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice but almost, any of you using or used a
Hotkey Matrix before?
As I understand it's
Not quite a control serfice but almost, any of you using or used a
Hotkey Matrix before?
As I understand it's basically a keyboard and all keys have dedicated
functions in PT, so there's no key with 2 or more functions by using
modifier keys etc. I'm just wondering if it will be useful and
] On Behalf Of
Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice but almost, any of you using or used a
Hotkey Matrix before?
As I understand it's basically a keyboard and all keys have dedicated
? I could be wrong.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf
Of Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice
The BCF should be able to control some plug-in parameters.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of
Me
Sent: Wednesday, April 01, 2015 11:26 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf
Of Nickus de Vos
Sent: Wednesday, April 01, 2015 9:02 AM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
Not quite a control serfice but almost, any of you using or used a
Hotkey Matrix
I'm sorry, thanks for the clarification.
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of
TheOreoMonster
Sent: Wednesday, April 01, 2015 2:24 PM
To: ptaccess@googlegroups.com
Subject: Re: Control Surface Recommendations
You are confusing
What is your price point and what are your needs aside from accessibility,
I/O[s tactile faders/controls preamps/channels quality of converters? You could
start off at about $600 with a Digidesign 003 or go all the way up to some
$1 SSL units.
From: ptaccess@googlegroups.com
Hi Alex,
I have struggeldwith this question myself.
And a
I think I have the answer.
I will go for the QCon Pro. its made by Icon.
And able to do Protools, QBase, Sonar, Logic and more.
the QCon Pro is a unit with nine motorised faders and all the knobs you could
venture.
Inc jogwheel, and
Hi Alex,
Any of the Avid interfaces will give you the highest level of accessibility
with Pro Tools. The S series is definitely the future but I personally have no
experience with it. The C|24 is great but more expensive and will probably only
be supported for another few years. The Artist
Hi David,
for plugins I use a Behringer bcr 2000. But, as far as I know the QCon pro can
farily do its job with the plugins that proTools uses. there are lots of
asignable keys to work with and things as send, pan EQ and others are one knob
reachable. If the plugins were a real issue, the
As mentioned earlier, the best integration with Pro Tools is with the Avid
surfaces. Other surfaces use HUI emulation which, although it works, is not the
greatest. Further, taking a look at what U.s. retailers carry is a good way to
gauge the market.
Slau
--
You received this message
That sounds great mac, but from my research, it seemed as if only the avid and
Macki controllers allowed you to automate plug-in parameters. ProTools does not
have a midi learn function, so the midi learn option on the control you mention
will be redundant. I'm pretty sure that's the case. I
Hi Slau,
for as far as I can see, other services use the same protocols as the once from
Avid.
I searched for this in the manual, and automation is taken care of, also for
plugin parameters.
I will test this Myself soonly. If it works as good as the avid controlers, I
let you know. The money
, February 16, 2015 3:27 PM
Subject: Re: Control surface help
Apparently, you power on the bcf by locating the fifth button from the
top left, holding it down while pressing the on button. This should put
it into hui mode. Unfortunately, I don't think the bcf works with plugin
automation. I've
: Monday, February 16, 2015 3:27 PM
Subject: Re: Control surface help
Apparently, you power on the bcf by locating the fifth button from the
top left, holding it down while pressing the on button. This should put
it into hui mode. Unfortunately, I don't think the bcf works with
plugin
automation
- From: David Eagle onlineea...@googlemail.com
To: ptaccess@googlegroups.com
Sent: Monday, February 16, 2015 3:27 PM
Subject: Re: Control surface help
Apparently, you power on the bcf by locating the fifth button from the top
left, holding it down while pressing the on button. This should put
slauhala...@gmail.com
To: ptaccess@googlegroups.com
Sent: Monday, February 16, 2015 2:02 PM
Subject: Re: Control surface help
HUI does indeed support plug-in control. Since the release of the original
Mackie HUI, plug-in parameters are mapped automatically, at least with Pro
Tools.
Slau
On Feb 16
any tutorial using it with Pro tools 11 ?
Thanks,
Rui Vilarinho
- Original Message - From: Slau Halatyn slauhala...@gmail.com
To: ptaccess@googlegroups.com
Sent: Monday, February 16, 2015 2:02 PM
Subject: Re: Control surface help
HUI does indeed support plug-in control. Since
Thanks buddy.
- Original Message -
From: David Eagle onlineea...@googlemail.com
To: ptaccess@googlegroups.com
Sent: Monday, February 16, 2015 3:27 PM
Subject: Re: Control surface help
Apparently, you power on the bcf by locating the fifth button from the top
left, holding it down
Yeah, same experience here, although they're no longer being
manufactured and I doubt there'll be any further driver updates.
Still, for the price of one second hand, they're a neat tool to have
at your disposal.
On 2/15/15, Chris Norman chris.norm...@googlemail.com wrote:
Worked last time I
Oh, and it turns out that the M-Audio oxygen keyboards work with ProTools in
terms of controling track volume and pan and transport, plus virtual instrument
controls, but not audio plugin controls. So our options really are limited. I
think Avid are trying to force you into buying their HD
Thanks for all the help. I think I’m going to try using my BCF2000 with
ProTools for track/sends volume and pan, and maybe transport controls. If I
need to change a plugin, I’ll use Reaper for that. Reaper has many more
advantages over ProTools when it comes to plugins; for a start, they allow
If i am not mistaken if the surface had HUI support it should be able to
control plugins as well? I need to see what’s going on with RWP as i haven’t
been getting those messages as of late.
On Feb 15, 2015, at 5:50 PM, David Eagle onlineea...@googlemail.com wrote:
Yes, I agree. I don’t
Worked last time I tried it yes, definitely with tools and Yosemite.
Sent from my iPhone
On 15 Feb 2015, at 03:32, Keith Reedy wa9...@gmail.com wrote:
Are they still supported?
We print the Bible in Braille,
http://biblesfortheblind.org
Keith Reedy
God gives His best to those who
David,, if you can get your hands on an alpha track, that would meet yourneeds.
It has the ability to control plugs.
Sent from my iPhone
On Feb 13, 2015, at 10:21 PM, David Eagle onlineea...@googlemail.com wrote:
Alas you can not. Perhaps if the plugin parameters could be controlled by
Okay, thanks Matt. What about the M audio oxygen keyboards? Apparently they
also have the ability to control plug-ins. I haven't done much research on this
yet, I am out at the moment, But this seemed to be very affordable. I do not
need motorised faders. Just the ability to control things
An there in lies the reason i switched to reaper and don’t really use Pro Tolls
all that much anymore. I have an Allen Heath ZED R16 and It didn’t have HUI
support at the time So to Reaper i Went. Also having access to AU and VST plugs
without a wrapper is nice as well.
On Feb 13, 2015, at
Voice over on mac. www.reaperaccess.com http://www.reaperaccess.com/
On Feb 14, 2015, at 12:33 PM, Cameron Strife came...@cameronstrife.com
wrote:
Not to hijack the topic, but monkey, are you using reaper with
voiceover or are you using it on a windows box?
On 2/14/15,
Not to hijack the topic, but monkey, are you using reaper with
voiceover or are you using it on a windows box?
On 2/14/15, TheOreoMonster monkeypushe...@gmail.com wrote:
An there in lies the reason i switched to reaper and don't really use Pro
Tolls all that much anymore. I have an Allen
As it goes, I have me an Alpha track here that I've hardly ever used. No
box or anything, but the unit works perfectly if anyone's interested in
buying it.
HTH someone.
On 14/02/2015 12:03, Matt Diemert wrote:
David,, if you can get your hands on an alpha track, that would meet yourneeds.
+1 on the Alphatrack, they're wicked little units.
On 2/14/15, Chris Norman chris.norm...@googlemail.com wrote:
As it goes, I have me an Alpha track here that I've hardly ever used. No
box or anything, but the unit works perfectly if anyone's interested in
buying it.
HTH someone.
On
Presonus Faderport is what I use and also John Gunn from this list. John's wife
has assisted us with a little description and we have, of course, the manuals.
The faderport can be purchased for less than US$200. It has one fader - it is
motorized. it has Pan and all of the transport controls.
I truly do not know have not tried. Fact is I haven't used it that much I am
getting ready to. Eat Q is not something I'm going to be doing with the control
surface.
Ricky Prevatte LMBT1154
On Feb 13, 2015, at 8:54 PM, David Eagle onlineea...@googlemail.com wrote:
Thanks for that Ricky.
Thanks for that Ricky. I’ve had a look on the Internet. I assume that you can’t
control plugin parameters with this? It seems as if this is the case for
surfaces that run in HUI mode. Does the Faderport allow you to change EQ
settings for instance, or is it just track volume and pan?
Thanks.
Alas you can not. Perhaps if the plugin parameters could be controlled by midi
values then plugins might be controllable - I don’t know. I have a Beringer
BCF2000 which I think works with ProTools under the HUI mode. I think this also
allows me to control send faders as well as track and
I have an artist mix, and honestly I have no idea why they cost so much... No
transport, no jog wheel... Wish I'd brought something a little cheaper to be
honest.
Sent from my iPhone
On 14 Feb 2015, at 03:21, David Eagle onlineea...@googlemail.com wrote:
Alas you can not. Perhaps if the
For this reason, Chris, I asked if there are similar surfaces in the same
price range and capabilities.
-Original Message-
From: Chris Norman
Sent: Thursday, February 21, 2013 11:25 AM
To: ptaccess@googlegroups.com
Subject: Re: control surface
Don't think you'll find that lol
@googlegroups.com
Subject: Re: control surface
Don't think you'll find that lol. They're quite old.
Sent from my iPhone
On 21 Feb 2013, at 12:55, Juan Pablo jpcula...@gmail.com wrote:
Yes, I did. All digi 003 or project mix are in an used condition. I want
one into the box, never touched
for me.
Best,
Juan.
-Original Message-
From: Monkey Pusher
Sent: Thursday, February 21, 2013 1:00 PM
To: ptaccess@googlegroups.com
Subject: Re: control surface
Don't know of any all in one interface and control surfaces off hand
still being made with motorized faders. The zoom R16
Like somebody said, if you go to a reputable dealer you can get some parcial
coverage. It can be a give and take, you can pick up a 002 or 003 which have
almost no differences for about $450 which at that price you could get two
if you had to replace one and be paying less than you would for
You could look at the Alesis master control. Haven't used it, but the specks
looked pretty good.
Kevin
--
You received this message because you are subscribed to the Google Groups Pro
Tools Accessibility group.
To unsubscribe from this group and stop receiving emails from it, send an email
tnx for the reply Poppa Bear :) But I don't won a 002. Actually , I just
wanted to know, if the drivers of both MCU BCR2000 would work seamlessly
as my control surface , a lovely pair :P
No problem, adieu
- Original Message -
From: shihab talukder
To: ptaccess@googlegroups.com
Sent: Friday, July 13, 2012 12:39 AM
Subject: Re: Control Surface
tnx for the reply Poppa Bear :) But I don't won a 002. Actually , I just
wanted to know, if the drivers of both MCU
Hey, I have an MBOX Pro with pro tools 9 software. And for a recent
addition, I purchased Mackie (MCU) pro as my Midi control surface. However,
owing to my needs , I need another Rotary USB/MIDI Controller for my
automation in plugins etc. Now the problem is, Mackie control c4 is way
, but in theory it should work.
- Original Message -
From: shihab
To: ptaccess@googlegroups.com
Sent: Thursday, July 12, 2012 4:02 PM
Subject: Re: Control Surface
Hey, I have an MBOX Pro with pro tools 9 software. And for a recent addition,
I purchased Mackie (MCU) pro as my Midi
not surprised mate, they have changed their name I think, judging by the
Eucontrol, and the Avid website, but here you go anyways.
http://www.dv247.com/studio-equipment/avid-artist-mix--88471
I've looked through the results, and this looks like the one most like my
surface, although it's £200
Thank you my friend.
Keith Reedy
Click the link below to download MP3's of Keith Reedy's music as a gift from
Bibles For The Blind.
http://biblesfortheblind.org/download_music.shtml
God gives His best to those who leave the choice with Him. J Hudson Taylor.
On Sep 24, 2011, at 4:19 PM,
I got a b stop Euphonix MC mix compact from Digital village. It came with a
crack between the fourth and fifth faders, but it doesn't affect the
performance of the unit.
It cost me £824 or so, but I've found them new on Studica.com for just over a
grand. All in all though, used it once
Yep. What you would do is show those tracks only. In result, the first 4 faders
would be up for you to mix and control at will.
Kevine:
So been looking at control surfaces and it seems majority of the
standalone ones comes with 8 faders. However most of my projects
tend to have at least 10
1 - 100 of 125 matches
Mail list logo