;-)
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
infocusp limited
\\ PO Box 77032, Auckland New Zealand \ www.infocusp.co.nz
DISCLAIMER: This electronic message together with any
attachments is confidential. If
you are not the intended recipient, do not copy, disclose or use the contents
Tony,
This in no longer correct at 10.0 and above for UV.
Regards,
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
Gnosys Consulting Limited
11 Woodward Road, Mount Albert, Auckland 1003, New Zealand
DISCLAIMER: This electronic message together with any attachments is
confidential. If you
Leroy,
I assumed that would be the answer having worked on the internals back in
the early nineties. But what the hell, no harm in asking ;-) I guess it
would depend on the demand for such a thing as to determine if it could be
added to the execution level?
Cheers,
Phil Walker
+64 21 336294
Here you go.
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
infocusp limited
\\ PO Box 77032, Auckland New Zealand \ www.infocusp.co.nz
DISCLAIMER: This electronic message together with any attachments is
confidential. If you are not the intended recipient, do not copy, disclose
or use
Yes.
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
infocusp limited
\\ PO Box 77032, Auckland New Zealand \ www.infocusp.co.nz
DISCLAIMER: This electronic message together with any attachments is
confidential. If you are not the intended recipient, do not copy, disclose
or use the contents in any
TRANSACTIONS and ON ERROR
Another issue exists with ON ERROR within a transaction, at least when it
was implemented back in the early to mid nineties.
I have not tested it recently and Ardent, Informix or IBM may have addressed
it, but if a transaction was active and a situation arose which
HUSH ON
EXECUTE COMMAND CAPTURING OUTPUT
HUSH OFF
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
Gnosys Consulting Limited
11 Woodward Road, Mount Albert, Auckland 1003, New Zealand
DISCLAIMER: This electronic message together with any attachments is
confidential. If you are not the intended
Sara,
You need to:
vi /etc/xinetd.d/telnet and set disabled to no, save and then run
/etc/init.d/xinetd restart
Cheers,
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
Gnosys Consulting Limited
11 Woodward Road, Mount Albert, Auckland 1003, New Zealand
DISCLAIMER: This electronic message
Hi,
Has anyone heard when the .Net product for U2 is going to be released? There
has been talk of a version for Unidata 6.1 I believe, but I am more
interested in the UniVerse version and also what release of UniVerse will be
required?
Phil
---
u2-users mailing list
[EMAIL PROTECTED]
To
Hi LeRoy,
Sorry to keep banging on about this. But are you saying that the changes are
ALL client side? If so which versions of UV e.g. 10.1.0, 9.x will UO.NET
work with?
Regards,
Phil.
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
-Original Message-
We had our media folks in Kansas
John,
What uid and gids do you get for the user? Is the information the same as
you would get normally.
e.g. the id command.
Cheers,
Phil
Weiss, Dan wrote:
What is the best solution for synching usernames and passwords together
from NT to UNIX?
We're about to migrate to UV on linux and
that the trigger program would be stepped over!
Phil Walker
---
u2-users mailing list
[EMAIL PROTECTED]
To unsubscribe please visit http://listserver.u2ug.org/
.
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
Gnosys Consulting Limited
11 Woodward Road, Mount Albert, Auckland 1003, New Zealand
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sara Burns
Sent: Saturday, November 20, 2004 10:01 AM
To: U2 List ([EMAIL
we are
at it, why restrict dictionaries to be hashed files - I cannot think of a
reason why they have to be hashed - maybe someone from IBM can tell me.
Cheers,
Phil Walker
+64 21 336294
[EMAIL PROTECTED]
Gnosys Consulting Limited
11 Woodward Road, Mount Albert, Auckland 1003, New Zealand
?
Cheers,
Phil Walker
+64 27 5336294
+64 3 3120352
[EMAIL PROTECTED]
Gnosys Consulting Limited
25 Roscrea Place, Mandeville North, RD2 Kaiapoi, North Canterbury 8252, NEW
ZEALAND
DISCLAIMER: This electronic message together with any attachments is
confidential. If you are not the intended recipient
seems that things are a lot harder
than they should be.
Phil Walker
+64 27 5336294
+64 3 3120352
[EMAIL PROTECTED]
Gnosys Consulting Limited
25 Roscrea Place, Mandeville North, RD2 Kaiapoi, North Canterbury 8252, NEW
ZEALAND
DISCLAIMER: This electronic message together with any attachments
I believe that you should change any code like this anyway to
UPCASE(username) as Windows is case insensitive relating to
domain/usernames.
Phil Walker
+64 27 5336294
+64 3 3120352
[EMAIL PROTECTED]
Gnosys Consulting Limited
25 Roscrea Place, Mandeville North, RD2 Kaiapoi, North Canterbury
STACKWRITE [OFF|ON]
Place this in the LOGIN paragraph or even the UV.LOGIN paragraph in the UV
account for a system wide setting.
Cheers,
Phil Walker
+64 27 5336294
+64 3 3120352
[EMAIL PROTECTED]
Gnosys Consulting Limited
25 Roscrea Place, Mandeville North, RD2 Kaiapoi, North Canterbury
somewhere that UV did this under
certain conditions.
Can anyone shed some light?
Phil Walker
+64 27 5336294
+64 3 3120352
[EMAIL PROTECTED]
Gnosys Consulting Limited
25 Roscrea Place, Mandeville North, RD2 Kaiapoi, North Canterbury 8252, NEW
ZEALAND
DISCLAIMER: This electronic message
if that
would fix the problem?
Cheers,
Phil Walker
+64 27 5336294
+64 3 3120352
[EMAIL PROTECTED]
Gnosys Consulting Limited
25 Roscrea Place, Mandeville North, RD2 Kaiapoi, North Canterbury 8252, NEW
ZEALAND
DISCLAIMER: This electronic message together with any attachments is
confidential. If you
Guys,
I might be wrong here, but is this not a U2 problem. Should IBM not fix the
software so that all access to UV consistently uses the same security
function calls so that the method of authentication is consistent across
interfaces, and if you like transparent to U2.
Phil Walker
+64 21
Hi,
I have just tried using the U2 XML/DB Tool on an existing account and it does
not work. After looking at other accounts on which it did work, I started to
suspect it is because the account is pick flavour. so I created a dummy account
as (newacc) ideal flavour and the tool connects and
I have found what I believe to be a problem with implementing triggers
in UniVerse.
If I have a trigger on a file and a developer is trying to resolve a
problem in a program which happens to update/delete that file an issue
using 'RAID' the debugger ;-) When the developer steps over the
write
I know that are good as they are very powerful. My point is I cannot
deploy them, if developers cannot debug programs which happen to contain
writes to files which have a trigger on them. I also know they start an
implicit transaction. This in itself does not mean that you cannot use a
debugger as
-
[EMAIL PROTECTED] On Behalf Of phil walker
Sent: Friday, June 10, 2005 2:50 AM
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] [UV] Triggers, RAID and SQL 2005
I know that are good as they are very powerful. My point is I cannot
deploy them, if developers cannot debug programs which
They may not have pollution but they do have politicians - some might
say the same thing.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kieran Clulow
Sent: Friday, 17 June 2005 5:15 p.m.
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] AD:
Ray, you should change the heading;-)
Yes, who would ever have thought that the company which originally
developed UV would be worth 2,100,000,000 USD.
Vmark merged (tookover Unidata) to become Ardent.
Ardent bought Prism (I think).
Informix tookover Ardent (At least that is what they
One I can thing of, and I normally work on UV and prefer, is that you
can debug programs which interact with file which have triggers on them.
In UV this is not possible and is seen as an enhancement!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL
I need to generate a timebased sequential key which is independent of
daylight savings time, so that I can consistently know in what order
transactions took place even when they occur over the daylight saving
time changes.
I have found the following in the help system about the BASIC SYSTEM(99)
] [mailto:owner-u2-
[EMAIL PROTECTED] On Behalf Of phil walker
Sent: Tuesday, 28 June 2005 8:38 AM
To: u2-users@listserver.u2ug.org
Subject: [U2] - Determining time sequence
I need to generate a timebased sequential key which is independent of
daylight savings time, so that I can consistently
)
If you need more than 6tps, you'll need to have something more
sophisticated
HTH
Mike
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of phil walker
Sent: Tuesday, 28 June 2005 10:38
To: u2-users@listserver.u2ug.org
Subject: [U2] - Determining time
Mike,
I am not sure if this is officially supported but I have done it in a
couple of sites.
You can change a couple of the settings in the VOC record for the
command you want to run. DOS or create an separate entry to the
executable itself.
Change attribute 4 of the voc entry to include one of
George,
If you need to go down the program path, to easily convert all your
paragraphs to call to a program, you could rename the UV LIST command
UVLIST and create a BASIC PROGRAM LIST which wraps an execute of the
UVLIST arguments command and then processes the results as you wish.
Very easy.
Hi,
Does anyone have an up2date /etc/magic file component for UV files (up
to an including UV 10 and 64-bit files) on HP Alpha platform? If so, are
they able to make it available?
Cheers,
Phil
---
u2-users mailing list
u2-users@listserver.u2ug.org
To unsubscribe please visit
Just because you can doesn't mean you should.
UniVerse has many ways of doing things, some well and others not so
well. I like you cannot se any benefit in using a TRANS...
My 2 cents
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Timothy Snyder
Isn't infosys an Indian Consulting company which provide outsourcing to
companies around the world? I wonder how much U2 knowledge they have?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Anmol
Chandrakant Khopade
Sent: Thursday, 3 November 2005 12:16
JayJay,
Will this API be available from withing UniVerse on RHEL, as currently
we cannot even use the AMI method as you allude to below.
Cheers,
Phil.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Jenkins
Sent: Tuesday, 6 December 2005 1:16
Wrong! The express editions do not have to be deleted.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Larry Hiscock
Sent: Thursday, 19 January 2006 10:31 a.m.
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] Unidata on XP Lap Top
All of which is
I am currently looking at running a script which will run from CRON, say
every 1 minute. The script will invoke Universe and the process may take
more than 1 minute to complete.
If I remember correctly, there was a problem when doing this, whereby
the second, third and so on executions of the
Hi,
Please do not flame me, but I cannot get over how one eyed some people
on this list are. Being a U2 bigot is no better than being a Microsoft,
Linux or Oracle one.
When will people get over Microsoft? They exist, they are one of the
biggest software companies in the world like it or not and
Is there a maximum length that the contents of the variable in a
HEADING ON printer_no heading_variable
BASIC statement.
I have a variable containing multiple lines of heading, separated by 'L'
and the output seems to have an extra carriage return line feed at
around 1000 characters.
I am
Has anyone heard, if and when people who do not have their maintenance
directly with IBM will have access to the U2 knowledgebase?
Does anyone else find it utterly frustrating that you cannot see
articles in their pertaining to U2, such as how-tos etc?
It does not do any favours when looking at
to these secrets. Good luck with any attempt
you may make. 8-)
Regards
David Logan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of phil walker
Sent: Thursday, 26 January 2006 3:16 PM
To: u2-users@listserver.u2ug.org
Subject: [U2] Knowledgebase access
Has anyone
Thanks Ray,
That would be about right. As I said it still prints the entire header,
it is just that the header gets interrupted by a CR/LF at that position
and continues, moving everything down a lineI guess I will have to
log an enhancement requestand do a work around.
-Original
No it is something to do with an internal heading buffer I am sure, as
the page is set to 320 wide, and the details lines which are printed
using a print on printer_no line_details print past the end of line
where the header is getting broken at.
My heading is not 2048 though, so that is
I used to have a 1 user license which I paid maintenance on, but then
this changed to a minimum 4 user license, so I cancelled as it was not
worth that much money to me. The distributor suggested that I use the
personal edition available off the website instead...
-Original Message-
From:
I think you are missing the point, I am not talking about PE, I was
forced on to that because they stopped my support on the 1 user license
I had, and I was not prepared to buy a 4-user license just to have
access to support. What I want is access to the knowledgebase, including
how-tos and to see
In [UV] as opposed to [UD] you can grant SQL SELECT privilege and not
INSERT, UPDATE or DELETE privileges.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of George Smith
Sent: Tuesday, 31 January 2006 9:16 a.m.
To: u2-users@listserver.u2ug.org
Subject: [U2]
and Unidata Updates, Deletions
Phil Walker wrote:
In [UV] as opposed to [UD] you can grant SQL SELECT
privilege and not
INSERT, UPDATE or DELETE privileges.
George Smith wrote:
How do you prevent in Unidata someone from using SQL to
update (or
delete) your Unidata data while at the same time
I have a file which contains some audit information
1138616151.3240
0001 13910
0002 83751.324
0003
0004 CONSUMER
0005 UPDATE
0006 APOLLO\Administrator
0007 2460
0008 2460
0009 telnet
0010
33C:\IBM\UV/catdir/%AExodusMain.trg30x1c4223C:\IBM\UV/catdir/%AExodusStub.trg
Node=EventProgramStack/ProgramStackLevel,ProgramStackName
Column=ProgramStackName/
TIA
From: phil walker
Sent: Tuesday, 31 January 2006 2:41 p.m.
To: 'u2-users@listserver.u2ug.org'
Subject: [U2] XML mapping file - HELP
I have a file which contains some audit
Damn cut paster ;-)
From
ColumnMap
Node=EventProgramStack,ProgramStackLevel,ProgramStackAddress
Column=ProgramStackAddress/
ColumnMap
Node=EventProgramStack,ProgramStackLevel,ProgramStackLevelNumber
Column=ProgramStackLevelNumber/
ColumnMap
Try the IBM knowledgebase
Sorry I couldn't resist ;-)
Walter, you could try http://u2ug.org as a good place to start, there
are quite a few knowledgeable people on this list as you may or may not
know and people are generally willing to help. I assume as you are
buying a package, that you
I have the following program which I am testing to try and connect to a
webservice to gain understanding about how this all works and what is and is
not possible.
I run and rerun the program over and over without logging off, and get a
variety of results with the SoapSubmitRequest returing
] On Behalf Of phil walker
Sent: Thursday, 2 February 2006 3:31 p.m.
To: u2-users@listserver.u2ug.org
Subject: [U2] [UV] SOAP interface
I have the following program which I am testing to try and connect to a
webservice to gain understanding about how this all works and what is
and is not possible.
I run
Not sure if this is just the way it appears to me, or if it is a
difference between Universe and Unidata which I have not worked with,
but from what I can see you need to separate the lines of code.
X.XML.INPUT.FILE = '_XML_/test.xml'
X.XML.EXT.RULE.FILE = '_XML_/test.ext'
X.STATUS =
Can anyone tell me what I am doing wrong?
I have a programs which uses the SOAP Api functions to send data across
to a Web Service on Windows written in VB.NET. The Webmethod takes six
parameters, two of which, AuditXMLDoc, and DatabaseXMLDoc, are defined
as strings in the VB code. I want to be
I have noticed that their seems to be less traffic as well.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tony Gravagno
Sent: Thursday, 16 March 2006 5:01 p.m.
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] Changes to the List
We've now been
It seems like this has been the only thing on the list recently, maybe
all the other emails are being sent by replyTIC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Charles Barouch
Sent: Friday, 17 March 2006 9:01 a.m.
To:
Hi,
The output of list.readu returns the device and inode number of a
Universe file. I can resolve the inode number by using find . -inum
xx, but if I am positioned at / then it is possible that 1 or more
files may have that same inode number, so I want to restrict the find to
the
are the legislators - P.J. O'Rourke
Dan Fitzgerald
From: phil walker [EMAIL PROTECTED]
To: u2-users@listserver.u2ug.org
Subject: [U2] Unix Device Number
Date: Fri, 17 Mar 2006 16:10:52 +1300
Hi,
The output of list.readu returns the device and inode number of a
Universe file. I can resolve the inode
It is a real pain having to reply to all.
CATALOG will not globally catalog in a PICK flavour account. What you
need to do is get the CATALOG verb from a IDEAL flavour account and copy
it to the PICK flavour account with a name of GCATALOG.
HTH.
-Original Message-
From: [EMAIL
How many people in this group as using triggers in there applications?
For those that do, how do they manage to use the debugger?
As from what I have been able to ascertains it seems as soon as you try
to debug a program which write/deletes to/from a file/table with a
trigger on the program
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of phil walker
Sent: Wednesday, April 19, 2006 11:02 PM
To: U2Users
Subject: [U2] [UV] Triggers
How many people in this group as using triggers in there applications?
For those that do, how do they manage
'SORTED.PARTS ':SORTED.PARTS
*PRINT 'SORTED.LOTS ':SORTED.LOTS
*INPUT BUG;IF BUG THEN DEBUG
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of phil walker
Sent: Thursday, April 20, 2006 12:58
To: U2Users
Subject: RE: [U2] [UV] Triggers
Mike,
I may have mislead you
I believe this is more or a linux permissions issue
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob Little
Sent: Wednesday, 3 May 2006 4:01 p.m.
To: U2 UG
Subject: [U2] UOJ Linux vs Windows
Hi,
I am writing a java application for fun that
Hi,
If you are talking UV, then triggers will be the quickest option, as
this is done at the database level. You just have to make your code as
efficient as possible. Unfortunately UV does not support a select or
read trigger. When I was in development for VMARK, I argued for it but
alas I was a
Mike,
You can do this, you just tweek the DOS verb to include and H in
attribute 4 or 5.
Cheers
Phil
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of HENDERSON MIKE,
MR
Sent: Friday, 12 May 2006 1:30 p.m.
To: u2-users@listserver.u2ug.org
Subject:
I have a client that only does backup once a week. I feel this is a
dangerous situation and would like to suggest they look for an
alternative.
I believe that they could mirror the live system, stop the mirror,
backup this copy and then restart and resync the mirror.
The problem with this
Has anyone configured their RHEL 4.0 system to authenticate against
their active directory, to hopefully overcome the administration cost of
maintaining both Linux and Windows security.
If so, what issues did you have with regarding to:
a) telnet or ssh connectivity
b) samba connectivity
c)
Tom you probably did not mean anything by it, but why move it off list?
Just because everyone did not respond does not mean people are not
interested. Do you want 200+ emails saying I want it from each member of
the group, that is what we don't want I would suspect. Better still if
Adrian is able
DE JA VUE!!! As a reseller/consultant I am at this very moment trying to
get access to the knowledgebase through my master var who have been
extremely helpful. But alas, after 12 months of asking I am still no
closer to the elusive pot of gold at the end of the rainbow. Maybe it is
as
Here here. I agree with Tony, but I also see a clear distinction between
a knowledge base/documentation and support. Why lock up the
knowledgebase...that is the great thing about the internet, the ability
to search for information in an instant and then make an informed
decision as to what to do
I would suggest a trigger which updates a log file and that is all it
does.
The log file or a pool of log files, would be better, to allow for
performance,broken files etc could contain standard trigger information
plus environment details/call stack etc, (can be used for auditing then.
Have a
If someone is looking at MySql I hardly think they would contemplate
buying DataStageat least the last time I saw any pricing...might be
different now that IBM own it. But I suspect it financed quite a few
executives/shareholders retirements ;-). Only 1 or 2 sites left in this
part of the
I am calling a UniVerse BASIC program TEST from the UNIX command prompt
using the following command 'uv TEST' which sets @SYSTEM.RETURN.CODE
to various values. I was hoping to be able to check the exit status of
the uv command thinking that @SYSTEM.RETURN.CODE may be used to set the
exit status,
: phil walker [EMAIL PROTECTED]
To: u2-users@listserver.u2ug.org
Subject: [U2] [UV] exit status and @SYSTEM.RETURN.CODE
Date: Mon, 31 Jul 2006 20:29:13 +1200
I am calling a UniVerse BASIC program TEST from the UNIX command
prompt using the following command 'uv TEST' which sets
You can try this yourself by adding an 'H' to field 4 of the VOC item
for QSELECT is suspect.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jonathan D
Smith
Sent: Thursday, 3 August 2006 8:01 p.m.
To: u2-users@listserver.u2ug.org
Subject: Fw: [U2] [UV]
Hi all,
Does anyone know:
When is 10.2 due out?
What is going to be included? for example Web Service provider.
Regards
Phil.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Leroy Dreyfuss
Sent: Wednesday, 30 August 2006 11:01 a.m.
To:
Cool, just tried it, what version of UV is this available from?
Or scroll forward or left and right to edit the command.
Ain't life great!
Roy
I've been using a variation of the code snippet Bob Woodward posted a
couple of weeks ago to change my UV prompt to display the current
account:
0001:
Hi,
Not sure how many people are using the XML functionality in UniVerse,
specifically the XMAPCreate function, but I have a question regarding
the functionality or lack there of this function. I have a program which
uses the XMAPCreate,XMAPAppendRec and XMAPToXMLDoc functions to create
an XML
Excel 2007
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin King
Sent: Wednesday, 25 October 2006 6:00 a.m.
To: u2-users@listserver.u2ug.org
Subject: [U2] [OT] Excel PivotTable Limitations
Is anyone aware of a PC-based tool that one can use to do
Conspiracy Theory:
Maybe IBM does not want a future MV environment, maybe they hope
everyone will go to DB2...if so, then I hope it works. I think more
likely they would go to Microsoft, where information is readily
available.
;-)
-Original Message-
From: [EMAIL PROTECTED]
INDICES BASIC command possibly?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Perry Taylor
Sent: Thursday, 16 November 2006 12:00 p.m.
To: u2-users@listserver.u2ug.org
Subject: [U2][UV] Determining INDEX.nnn File
Hello, All.
Is anyone aware of a
Not sure if this is a question? But yes, Triggers have existed in UV
for quite some time. Initially against UV SQL tables, but at release
10.x against UV Files too.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of chuchi
Sent: Wednesday, 29 November 2006
Yeah, that has always bugged me...there is no real reasons for it as far
as I can tell.
The reasons often put up are:
1. Not able to control operating system level access...so what, we
cannot control people usin cp, rm, or mv either, or for that matter a
binary editor of some sort.
2. There is
Does anyone know what the configuration code should be? I have not been
provided with one, and I am in the middle of an upgrade to a development
machine ;-)
Cheers,
---
u2-users mailing list
u2-users@listserver.u2ug.org
To unsubscribe please visit http://listserver.u2ug.org/
tab and you will see a button marked Config code.
Brian
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of phil walker
Sent: 03 January 2007 09:19
To: u2-users@listserver.u2ug.org
Subject: [U2] Configuration Code
Does anyone know what
Hi Sanjeeb,
If you have not already attended the base U2 training courses I would
suggest that you convince your employers to arrange for you to do so. To
be able to offer outsourcing to a company using U2 it is usually
necessary for the outsourcing companies staff to be conversant in the
You could try Centrify DirectControl from Centrify. This integrates into
Microsoft Directory. They also offer and auditing facility which you
guys in America at least might be interested in. I have it deployed in a
UV on RHEL 4.0 AS environment.
Cheers,
Phil.
-Original Message-
From:
Hi ,
I trying to produce a XML document out of UV using the XMAP
functionality in Basic. The data I need is some single valued data as
well as a set of multivalues e.g.
Record Structure Looks Like
ID0
SV1
SV2
MV3
MV4
Record Data Looks Like
ID0D
Hi,
Jim Todhunter and Phil (can't remember his surname - not me although I
did work at VMark later on) were behind the development of UV. There
were also some people who came over from Prime of who Pete Simmonson
(sp?) was one I believe. Mark Baldridge or Glenn Herbert can probably
confirm this
Wol,
I think you are confusing multi-part files with distributed files.
Cheers,
Phil
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Anthony
Youngman
Sent: Friday, 22 June 2007 8:30 p.m.
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] [UV]
. As far as I was
aware, the UV implementation had similar characteristics ...
Cheers,
Wol
-Original Message-
From: phil walker [mailto:[EMAIL PROTECTED]
Sent: 22 June 2007 10:02
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] [UV] Trigger(s) on distributed file
Wol,
I think you
Can IBM web services handle getting passed an xml document, such as a sales
order? The example provided in the 'hard to find' knowledgebase using two
number to be multiplied is very simplistic...and I was wondering how you
would use then to process incoming sales orders.
Cheers,
Phil.
I believe Accuterm is one of the 3rd party products you mentioned. At
least is does have a U2 device licensing option in its configuration.
However we cannot get device licensing to work using Accuterm, with SSH
protocol and RHEL 4.0, Universe 10.2.4 enterprise version?
Is Accuterm still
David,
What version of the uvlicn.dll are you running?
Cheers
Phil.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David Ward
Sent: Thursday, 28 June 2007 11:46 a.m.
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] Device Licensing
I finally
] Device Licensing
There is no such file on my system.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of phil walker
Sent: Wednesday, June 27, 2007 6:59 PM
To: u2-users@listserver.u2ug.org
Subject: RE: [U2] Device Licensing
David,
What version
Tony,
Why do that? As long as the discussion is technical and relates to U2.
There is plenty of stuff a lot of people on this list are probably not
interested in but it still percolates on the list/forum so to speak.
Personally I just filter it out. As long as the Subject is well
specified you
Nick,
Here, here to your following statements
To me, this is part of the problem that we have in the MV world. We
look at how things are being done elsewhere and say, Pick does it
better, we aren't going to do that. The problem with this approach is
that everyone else is adopting these
1 - 100 of 224 matches
Mail list logo