Wigster wrote:
> Hi,
>
> The Bluetooth speaker as output devices in PCP6 sounds great. But I am
> wondering about the reverse: using a PCP device itself as a Bluetooth
> speaker (sink) itself.
>
> Is such a thing possible?
Yes, it can be done today..just not perhaps as seemless as you
yanto wrote:
>
> Where does this image come from, from which interface, which I don't
> know?
>
That particular image came from iPeng because I could easily upload it
to the forum using Tapatalk.
However, the embedded web page come from the LMS web interface.
Settings/Player//Audio
Paul
Hello
Sorry, bluetdi, don't get upset. On other forums, we prefer the original
language, because the translation is not always accurate. Thank you for
your welcome :)
Hello Paul.
Where does this image come from, from which interface, which I don't
know?
Ccdlt
Hi,
The Bluetooth speaker as output devices in PCP6 sounds great. But I am
wondering about the reverse: using a PCP device itself as a Bluetooth
speaker (sink) itself.
My usecase is the following: I mostly use the PCP device as an LMS
player, connected over optical to my amplifier and dumb
yanto wrote:
> Bonjour
>
> Je suis très content de ma nouvelle installation , c'est un vrai plaisir
> .
>
> Toutefois Ma squeezebox touch a un comportement curieux . Avant ,
> voici comment cela fonctionnait . Je selectionnais un album , je
> l'écoutais , puis j'arretais la SBT . Au
yanto wrote:
>
> Y-a-t'il un paramétrage que j'aurais manqué ?
>
Peut-être
Settings/Player//Advanced/Resume on power on
[image:
https://uploads.tapatalk-cdn.com/20191002/eb423a3a77fac25fa692ea30e948d438.jpg]
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Bonjour
Je suis très content de ma nouvelle installation , c'est un vrai plaisir
.
Toutefois Ma squeezebox touch a un comportement curieux . Avant ,
voici comment cela fonctionnait . Je selectionnais un album , je
l'écoutais , puis j'arretais la SBT . Au redémarrage aucun son ne
sortait , il
It depends on your setupbut you could manually copy your prefs and
Cache folder.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> There is no way to upgrade from 5.x, as the boot partition has increased
> in size.
Is it possible to get the old (5.x) settings (also from LMS) into the
new 6.x version?
Or is it better to go the hard way and set everything completely new?
"You need your brain in gear"? how about showing a bit more courtesy to
someone writing great software and not charging for it.
chill wrote:
> I've installed pCP6-b4 onto a 3A+ this evening. You definitely need
> your brain in gear with the 3A+, since it has no ethernet socket and
> only one
I've installed pCP6-b4 onto a 3A+ this evening. You definitely need
your brain in gear with the 3A+, since it has no ethernet socket and
only one USB socket. Setting it up to act as a wifi AP means either
doing the installation in a 3B+, or using a USB-to-Ethernet adapter, and
if you have your
Paul Webster wrote:
> \\192.168.0.xx\My_book
> or
> \\picorelms\My_book
Merci ! c'est la 2éme ligne qui a fonctionné .
Tout à l'air de fonctionner , je verrais après un reboot , si lms
retrouve mon disque dur , merci encore Paul pour votre aide :)
yanto wrote:
>
> Voici ce que je rentre dans la recherche d'un nouvel emplacement réseau:
> \\192.168.0.xx\picorelms\My_book
>
\\192.168.0.xx\My_book
or
\\picorelms\My_book
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster wrote:
> Le disque est-il maintenant vide ou est-il tout simplement invisible?
>
> S'il apparaît vide, essayez de le brancher sur un PC et voyez s'il l'est
> réellement (pCP n'aurait pas dû en modifier le contenu).
>
> Si vous ne le voyez pas, est-il alimenté par sa propre source
paul- wrote:
> The beta works on all boards. The 64-bit kernel is only built for the
> RPI4, I am not going to build 64 bit kernels for the older boards.
>
> There is no way to upgrade from 5.x, as the boot partition has increased
> in size.Thank you!!!
Main system: Synology
The beta works on all boards. The 64-bit kernel is only built for the
RPI4, I am not going to build 64 bit kernels for the older boards.
There is no way to upgrade from 5.x, as the boot partition has increased
in size.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
yanto wrote:
> Bonjour
>
> Merci pour ce lien qui m'a bien aidé . J'ai quelques questions .
> Picoreplayer à détecté mon disque dur formaté en NTFS . j'ai suivi
> scrupuleusement le tuto,j'ai rebooter le pi4 , et au redémarrage mon
> disque avait disparu . Depuis picoreplayer , ne le
Assume you are talking about the boot loader update. The 9/10/2019
boot loader is what is marked as latest stable.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
@paul-
I just noticed Rasbian Buster has had an update
http://downloads.raspberrypi.org/raspbian/release_notes.txt
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
Paul Webster wrote:
> En Anglais
> https://www.picoreplayer.org/how_to_add_usb_hdd.shtml
Bonjour
Merci pour ce lien qui m'a bien aidé . J'ai quelques questions .
Picoreplayer à détecté mon disque dur formaté en NTFS . j'ai suivi
scrupuleusement le tuto,j'ai rebooter le pi4 , et au
paul- wrote:
> We have actually been toying with DD based backups, but nothing is
> final. LMS is what throws the monkey wrench into other methods.
A simple one-button method to clone the SD card to another location
(including another SD card) could be a useful addition to pCP - good
luck
We have actually been toying with DD based backups, but nothing is
final. LMS is what throws the monkey wrench into other methods.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I realise this is not the same as backing up a configuration, but it may
be useful as a way to backup your entire SD card - I do a nightly
backup of the SD card with this script:
Code:
imagefile=$1
bs=$(fdisk -l | grep -A 3 mmcblk0: | grep Units: | awk -F= {'print
Ah, thanks very much. :-)
paul- wrote:
> I need to remove the save to usb option, until I can fix it right. it
> worked back in the pCP 3.x days, but is is most usesless today.
>
> If you only configure a soundcard, it will work, but add anything, and
> it wont restore anything
I need to remove the save to usb option, until I can fix it right. it
worked back in the pCP 3.x days, but is is most usesless today.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
If I have a USB thumb drive plugged in and I save my configuration, the
next time I restart the server, it fails to start. At that point I just
have to unplug the USB thumb drive and restart it. I don't have a
monitor hooked up, so I don't know where it's getting hung. Obviously
the config seems
Yup, touch works fine.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you like the
I did end up getting jivelite to install and that is how I had the PI4
section configured when I tested the 64-bit kernel with the 7"
touchscreen. It got to the 2nd menu (language selection I think) and the
display became unresponsive. To clarify, the issue was it no longer
became responsive to
dvdan wrote:
> I confirmed there are issues with the display driver and the 64-bit
> kernel.
>
Just setup a Rpi4 2G with jivelite using the 64 bit
kernel..everything is fine. That seemed like there was a
connectivity problem with the repo when you tried to download..
Make sure the
If you are using the 64bit kernel, and want onboard audio.you will
need to set alsa not to use mmap.
28248
+---+
|Filename: 2019-09-27_15-26.png |
|Download:
yanto wrote:
> OK , merci ,j'ai enfin accés à l'interface . Je suis face à un autre
> souci , comment configurer LMS pour accéder au DD externe raccordé en
> usb . Ceci afin de pouvoir , écrire , modifier , ajouter , et supprimer
> des fichiers de ma bibliotheque musicale stockée sur ce DD
>
>
Paul Webster wrote:
> D'après votre commentaire, il semble que vous avez un écran attaché au
> RPi. Dans ce cas, jetez un coup dil aux dernières lignes pour voir
> ladresse IP quelle a récupérée.
> par exemple. 192.168.0.50
> Ensuite, utilisez un navigateur Web sur un autre système pour
Yes, pCP is developed for integration with LMS, so all of the features
are keyed to LMS integration. pcp-steamer is installed on the tweaks
page, which will create a web stream from an input device. Then all
you do is point your lms player to play that stream. Some help info is
with the
yanto wrote:
>
> Suis-je maladroit ou il manque une ligne de commande pour faire
> apparaitre l'interface
>
> cdlt
D'après votre commentaire, il semble que vous avez un écran attaché au
RPi. Dans ce cas, jetez un coup dil aux dernières lignes pour voir
ladresse IP quelle a récupérée.
par
Bonjour
J'ai acheté un Raspberry pi4 , sur lequel je souhaite monter lms . Je
joins un schéma pour exposer mon projet
28247
J'ai installé picoreplayer beta6.0 , la version 5 ne fonctionnant pas .
Après installation je n'ai pas accés àl'interface PCP . je suis bloqué
sur la console ligne de
thanks again for the quick response, but sorry I'm not sure I've got the
theory of operation with BT yet. a quick search didn't come up with any
info on how to use pcp-streamer. can you point me to some docs? would
love to stream bluetooth audio from a phone to a pcp. is that supported
or are
It not intended to work that way... the big issue is with having
two different programs fighting with the ALSA device. So the way it
works
phone -> pcp-streamer
LMS -> Play stream to another device.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
paul- wrote:
> Its easy to try. Ive not played with jivelite yet.
Doesn't seem jivelite wants to install on 6.0b4.
[ INFO ] Downloading Jivelite from the pCP Repository...
[ INFO ] Downloading will take a few minutes. Please wait...
[ INFO ] Downloading: pcp-jivelite_hdskins.tcz
[ INFO ]
paul- wrote:
> Its easy to try. Ive not played with jivelite yet.
Thanks for the quick response Paul. I just picked up a second pi4 to
try it on since I have one that's mostly working and will report back.
Not clear on what the story is with the upstream bootloader / firmware
stuff and
Its easy to try. Ive not played with jivelite yet.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Love the piCorePlayer system overall, thanks for the excellent work.
Running the full stack (LMS and Sharelite) an RPI4 w/a a 7" touch
display.how's the display driver issue looking? should I try b4
with the 64-bit kernel and sharelite or wait till the display driver
issues are sorted out?
paul- wrote:
> It puzzles me too, I left it settable for that reason.
>
I'm in good company then :). I won't lose sleep over it in that case.
paul- wrote:
> Perhaps.. a power cycle is what I planned.
Fine by me. Disconnecting is therefore a way to (temporarily) remove a
player from
chill wrote:
>
> A few puzzling things at the moment:
> 1) There's a 'BT Delay' setting that defaults to 1000. I'm wondering
> what this is for, and whether it interacts with the 'Player Audio Delay'
> setting in LMS. I tried varying that number, and couldn't figure out
> what difference it
Known Issue: Sound does not work with onboard audio...if your not
using onboard audio, what device are you using?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Runs fine in 32 bit, but when I change the config.txt file for 64 bit
Squeezelite won't start.
I've attached the dmseg file. Hope that helps.
Howard
paul- wrote:
> Its no bother..look at the bottom of the pcp page, if it says
>
> 4.19.73-pcpCore_v8, then your in the 64 bit kernel.
I haven't got around to replacing the b1 image on my main 4GB Pi4 (lots
of settings to transfer over), but I've installed the new beta in 64-bit
mode onto my spare 1GB Pi4. I do like the new Bluetooth settings. I
like that I can have multiple speakers connected, and I like that I can
give them
acanning wrote:
> I've downloaded and have booted the Pi4 using Raspbian :)
> Using SSH I have carried out the following commands;
> sudo apt-get update
> sudo apt-get dist-upgrade
>
> After about 20 minutes of activity I have rebooted and using command
> "/opt/vc/bin/vcgencmd version" I get;
Success :)
Thanks again.
acanning's Profile: http://forums.slimdevices.com/member.php?userid=13303
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
Its no bother..look at the bottom of the pcp page, if it says
4.19.73-pcpCore_v8, then your in the 64 bit kernel.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Thanks Paul
You are right in that I probably shouldn't be fiddling with things I
clearly don't understand but I enjoy the challenge and it helps me to
learn.
I have successfully updated the bootloader using your method and the new
version of PCP. All seems to be working very well and I have
Not sure when you updated your boot loader, as I don't think Aug15 has
ever been standard.
The bootloader update has ZERO to do with installing pCP. If you don't
know why you should be updating your bootloader, perhaps you should not
do it.
piCorePlayer a small player for the Raspberry Pi
I've downloaded and have booted the Pi4 using Raspbian :)
Using SSH I have carried out the following commands;
sudo apt-get update
sudo apt-get dist-upgrade
After about 20 minutes of activity I have rebooted and using command
"/opt/vc/bin/vcgencmd version" I get;
Aug 15 2019 12:03:51
Copyright
The only software I use is PCP, I've never tried Raspbian.
acanning's Profile: http://forums.slimdevices.com/member.php?userid=13303
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
acanning wrote:
>
> Can I try the new beta without updating the bootloader?
>
Yes, that error message is telling you that the firmware being used is
not new enough to upgrade the bootloader. Firmware is not the same as
the bootloader.
The pi4 bootloader is not even contained in the image.
Quick question
Do I need to update the bootloader in order to try the 64bit version of
the new beta? I got an error when I tried to update the bootloader just
now;
"vcgencmd: 'bootloader_config' command not supported. Please update VC
firmware"
The same as experienced by gilladur I think.
Hi pputzer,
now i works! I am happy.
I used the wrong pins for poweroff and shutdown. It was my error.
Thank you very much for your help.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und IQaudio DigiAmp+, 4x Picoreplayer wiith 7"Display and
Hi pputzer,
i have tried your overlay definition description without success.
Gerhardc
+---+
|Filename: Screenshot_2019-09-24 pCP - Tweaks.png |
|Download:
Gerhardc wrote:
> sorry, i am i little confusing. I have not the PI-SPC board. The ES9032
> has similar function. My understanding is it works the same way as
> PI-SPC Board.
Yes, that's why I meant you could try those settings even without the
extra board.
(I'm not Paul BTW)
Hi Paul,
sorry, i am i little confusing. I have not the PI-SPC board. The ES9032
has similar function. My understanding is it works the same way as
PI-SPC Board.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und IQaudio DigiAmp+, 4x Picoreplayer wiith
Gerhardc wrote:
> the powerswitch is connected to the ES9032 board and the Raspi receives
> power from ES9032. I think there is a PI-SCP.
The PI-SPC would be 'this board'
Hi Paul,
the powerswitch is connected to the ES9032 board and the Raspi receives
power from ES9032. I think there is a PI-SCP.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und IQaudio DigiAmp+, 4x Picoreplayer wiith 7"Display and
Audiophonics Sabre
Gerhardc wrote:
> Hi Paul,
>
> my system is a Raspi 3B. The Audiophonics power switch is working on PCP
> Version 5.
>
> Gerhardc
Are you using just the switch or the power board (PI-SPC) as well?
pputzer's Profile:
Hi Paul,
my system is a Raspi 3B. The Audiophonics power switch is working on PCP
Version 5.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und IQaudio DigiAmp+, 4x Picoreplayer wiith 7"Display and
Audiophonics Sabre DAC, 1 Picoreplayer and LMS 7.9.2,
Works like a charm. Nice and snappy. Only thing not working for me right
now is Eland's Information Screen. I'll check with him to see if he can
fix that. I like it for the Transporter.
Thanks again for the great software.
Howard
Are you on a PI4?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you like the
Hi Paul,
now i have installed the Audiophonics ES9032 card. It works, but the
audiophonics power switch is not function. The Audiophonics
extension is installed and listed on the extension Page as installed.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Hi Paul,
i have Bluetooth successfully installed and it runs like a charme. It is
great to run Audio output and Bluetooth as separate players in LMS.
Gratulation for this new Bluetooth implementation.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und
Yup, its not there anymore. Bluetooth is completely reworked. Look
on the main menu.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Hi Paul,
on the Squeezlite Webpage of PCP 6.00 B4 is the Bluetooth option
missing. It was available in 6.00 B1.
Gerhardc
1 SB3, 1xRadio, 1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with
Jivelite 7" Display und IQaudio DigiAmp+, 1x Picoreplayer wiith
7"Display and Audiophonics Sabre
Yes it does
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you like the piCorePlayer
Hi Paul,
Will this work with the 1 and 2 GB models?
Thanks,
Howard
paul- wrote:
> I have published a new beta
> image.https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0-b4.zip
>
> See info in the
>
paul- wrote:
> I have published a new beta
> image.https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0-b4.zip
> The primary reason for this is the pi4 4GB board *should* perform
> better in 64bit mode.
I can confirm in my case with the pi4 and 4gb board pcp and LMS
You are correct, wrong shortcut I fixed it above.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
gilladur wrote:
> Hi Paul, don't know why it is failing but I get this message:
> >
Code:
> > vcgencmd: 'bootloader_config' command not supported. Please update VC
firmware
>
> >
> How to fix this or what could be the reason?
You probably
paul- wrote:
> Not sure how I want to support this long term, but since RPI just made
> this default, I figured I would make an easier way for pCP users to get
> the new bootloader firmware... Ref:
> https://www.raspberrypi.org/forums/viewtopic.php?f=29=250368=50#p1538684
>
> open an ssh
I have published a new beta
image.https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0-b4.zip
See info in the
OP...https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664
For only the pi4, I have built and included a
Not sure how I want to support this long term, but since RPI just made
this default, I figured I would make an easier way for pCP users to get
the new firmware..
open an ssh session
Code:
ceo
tce-load -w git rpi-vc python3.6 (You can omit if you already
Unless there is a reason not to mount a small fan on your case it
certainly helped my RPI4. I use a FLIRC case and the case/fan combo
drops the temp to 38C.
Howard
Franck@ wrote:
> Thank you for the info. I thought the DAC card would also be inside the
> case.
Man in a van wrote:
> rpi4b is in a ' case'
> (https://shop.pimoroni.com/products/pibow-coupe-4?variant=29210100170835=GBP_source=google_medium=cpc_campaign=google+shopping=EAIaIQobChMIkL_J7tjX5AIVDbTtCh3O2ArOEAQYASABEgLkZvD_BwE)
>
> The average temp is 64/65 C.
>
> A similar set up (bare
Franck@ wrote:
> It's a bit off-topic, but does this set generate temperature problems?
> (In a few months, I will probably associate a rpi4b and a DAC+ Pro
> Hifiberry.The rpi3b+ is already hot with this DAC in the plastic box
> provided by Hifiberry.)
rpi4b is in a ' case'
Man in a van wrote:
> I have the iQaudio dac+ on rpi4b (4gb) running raspbian desktop with the
> 64 bit kernel. Seems to be working OK at the moment.(It's not the new
> model)
It's a bit off-topic, but does this set generate temperature problems?
(In a few months, I will probably associate a
cfuttrup wrote:
> Is there a list of problems or activities that needs to be tagged off
> before version 6 can come out of beta and be released? Just curious.
It's mostly revolving around my available time. But in general, pCP6 is
ready, other than some details related the the pi4. I have
paul- wrote:
>I'm going to release another beta soon with a 64bit pi4 kernel.
Just for info Paul
I have the iQaudio dac+ on rpi4b (4gb) running raspbian desktop with the
64 bit kernel. Seems to be working OK at the moment.(It's not the new
model)
Using Jivelte for a desktop player, It
Is there a list of problems or activities that needs to be tagged off
before version 6 can come out of beta and be released? Just curious.
cfuttrup's Profile: http://forums.slimdevices.com/member.php?userid=32784
View
acanning wrote:
> ok, sorry, perhaps I didn't make that clear enough.
>
> Other than the network mount, everything else seems to be working on the
> Pi3. Are there any other potential problems I should be aware of?
>
> Thanks
There are quite a few bugs in that beta, but not specifically
ok, sorry, perhaps I didn't make that clear enough.
Other than the network mount, everything else seems to be working on the
Pi3. Are there any other potential problems I should be aware of?
Thanks
acanning's Profile:
I missed that you moved the SD card, you _cannot__do that. As the Pi4
uses a completely different kernel and modules. We include all of the
kernels on boot disk, but when you add things, only the current running
kernel extensions are downloaded.
piCorePlayer a small player for the
Yay, I got it working. It was quite simple in the end.
I deleted and then reinstalled the 'Additional File Systems'. Once I'd
done that it mounted the network drive straight away without any errors.
acanning's
Thanks, I have re-entered it about 20 times :)
Wouldn't the netmounts.conf file have been carried over when I imaged
the Pi4 SD card before putting it in the Pi3?
Sorry to be a pain, this isn't a big deal but it is annoying
Ashley
I would try to re-enter that, not sure how you would be adding a space
when copying and pasting, also the vers option for cifs normally takes
vers=1.0 (With the .0 on it)
If you want you can copy the file /usr/local/etc/pcp/netmounts.conf from
your pi4 and put it on your pi3.
sudo scp
I just noticed that in the pCP.boot.log i get these messages
Mounting Network Drive...
mount: /mnt/music: unknown filesystem type 'cifs'.
Disk Mount Error, Retrying 2 more times...sleeping 10 seconds.
mount: /mnt/music: unknown filesystem type 'cifs'.
Disk Mount Error, Retrying 1 more
Thanks Paul but I think that may have been an error in my copy and
pasting. There is no space on the actual settings box. This is the
revised output.
[ INFO ] Mount configuration changed for 192.168.0.15:/multimedia
[ INFO ] Unmounting Old Mount Point: /mnt/music.
[ INFO ] New Mount Point
You have an extra space in gid= 50
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you
Morning
Is there any reason why pCP 6.0.0-b1 shouldnt work in a Pi3B?
I have it working well on a Pi4 but when I image the card (using
Win32DiskImager) and put it in the 3B I cant get the network disk to
mount. It mounts perfectly on the 4 but not on the 3 even though the
settings are
paul- wrote:
> >
Code:
> >
> tc@piCorePlayer:~$ uname -a
> Linux piCorePlayer 4.19.71-pcpCore-v8 #2 SMP PREEMPT Sat Sep 7 14:24:45 EDT
2019 aarch64 GNU/Linux
>
> >
>
> Seems RPi is making a start getting the 64bit kernel in shape.
Hi Paul,
great news - I would like to test this version if possible on my pi4
cheers
Gilladur
gilladur's Profile: http://forums.slimdevices.com/member.php?userid=61473
View this thread:
Code:
tc@piCorePlayer:~$ uname -a
Linux piCorePlayer 4.19.71-pcpCore-v8 #2 SMP PREEMPT Sat Sep 7 14:24:45 EDT
2019 aarch64 GNU/Linux
Seems RPi is making a start getting the 64bit kernel in shape.
Onboard Audio doesn't appear to be
I have Firefox and Chrome on this old XP SP3 Dell. Chrome version
Version 49.0.2623.112. Firefox 52.9.0
I also have a Windows 10 PC, but I prefer the old XP one because it's
fast and I am familiar with the registry. I'm not sure now if the
browser was the issue or something in the security of
Howard Passman wrote:
> Old browser and old OS.
Just curious what version/browser Old is?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
That was a clue. Thanks! Old browser and old OS. Switched to a different
computer and it worked. Don't know why it worked with pcP 5.0.
Bests,
Howard
kidstypike wrote:
> Yes it does.
>
> 28138
Howard Passman's
1101 - 1200 of 1336 matches
Mail list logo
