Can I call you sometime tomorrow?
Mike
On Wednesday, February 10, 2021, 08:02:48 PM CST, Tom Berry
wrote:
I would be happy to help debug it..
Tom AA4VV
On 2/10/2021 5:11 PM, Black Michael via wsjt-devel wrote:
Would you be available for some debugging?
I'll
Would you be available for some debugging?
I'll be back in a little while and perhaps we can connect up and I can see the
problem and debug it?
Mike W9MDB
On Wednesday, February 10, 2021, 03:49:45 PM CST, Tom Berry
wrote:
I am using the ANAN 7000 DLE and I selected FLEX radio /
Hmmm...I have an ANAN 100 -- have a 7000 supposed to be shipped this week.
But I don't have this problem (I wrote the PowerSDR backend).
I'll contact you about debugging this.
Mike
On Wednesday, February 10, 2021, 03:49:45 PM CST, Tom Berry
wrote:
I am using the ANAN 7000 DLE and I
not. The manual is almost certainly
correct, the reporter, if he is correct, almost certainly has a non-standard
IF-232C replacement.
73
Bill
G4WJS.
On 08/02/2021 18:17, Black Michael via wsjt-devel wrote:
The dude said "manual is wrong".
Trying to get more information on se
sprnet.org/drupal/node/1307
Mike W9MDB
On Monday, February 8, 2021, 12:06:48 PM CST, Bill Somerville
wrote:
On 08/02/2021 17:45, Black Michael via wsjt-devel wrote:
> Anybody with a TS-450S out there that is available for some testing?
>
> I've got somebody claiming it needs 1 s
Anybody with a TS-450S out there that is available for some testing?
I've got somebody claiming it needs 1 stop bit and XONXOFF handshake which I've
never heard before and 2 stop bits and HARDWARE handshake is the default setup
and has been for years.
Mike W9MDB
I will add that many operators aren't aware that their rig can't do full power
on all modes.
Many rigs rated at 100W can only do 25W in AM mode (100% duty cycle) -- the
manuals do show this.
For those rigs I always recommend to the ops to run FT8 at 50W max to avoid
pushing the temperature on
sure that is not the issue.
Sent from Mail for Windows 10
From: Black Michael via wsjt-devel
Sent: Friday, January 29, 2021 5:09 PM
To: wsjt-devel@lists.sourceforge.net
Cc: Black Michael
Subject: Re: [wsjt-devel] Hamlib error in RC4
This has been fixe in hamlib now.
Any Icom
This has been fixe in hamlib now.
Any Icom with a 1-byte mode value would see this error.
Mike W9MDB
On Friday, January 29, 2021, 01:39:50 PM CST, Tim Selner
wrote:
Hamlib error in RC4
I installed WSJT-X RC4 and I am having issues. I am running Windows 10 and an
IC-735.
I connected with him and found the error -- will affect any Icom with 1-byte
mode reply.
Mike W9MDB
On Friday, January 29, 2021, 04:17:43 PM CST, Bill Somerville
wrote:
Hi Tim,
in WSJT-X click "Menu->File->Open log directory" that will open a Windows
File Explorer window with
You would also notice the DT values getting larger over time too.
DT values should almost all be < 1 second and the vast majority < 0.5 seconds.
Mike
On Thursday, January 28, 2021, 09:37:15 AM CST, Bill Barrett
wrote:
Hell Gus-
When your computer stops decoding bring up a browser
RC4 has the latest hamlib -- so let's you can I get together off-line and
figure out what's broken.
Mike W9MDB
On Monday, January 25, 2021, 01:46:52 PM CST, Marco Calistri
wrote:
Il 25/01/21 11:45, Joe Taylor ha scritto:
The fourth public candidate release of WSJT-X 2.3.0 is
Can you provide a screen shot?
Mike W9MDB
On Monday, January 25, 2021, 11:52:54 AM CST, Kevin Fisher
wrote:
I have noticed that the UTC time in the RX window is not always correct as far
as the times go.
Sometimes I will see an item at 15 seconds, then 30 seconds then 00 and
Please try RC4 which just got released.
https://www.physics.princeton.edu/pulsar/k1jt/wsjtx.html
Mike W9MDB
On Monday, January 25, 2021, 09:19:07 AM CST, Yoshi(JH8XVH)
wrote:
Long time no see.
Today is not my story.
TS480 does not work on WSJTX-rc3 today.
But not my environment but
I've had this happen pretty regularly.not sure what RC this showed up in.
Seems the timing on WSJT-X slips and I get maybe 1 or 2 decodes with DT times
off by a couple of seconds (like -2.5) but miss a bunch.
I just had this happen where the WAV file is not being saved at all so there's
no
I need some people with these rigs to verify rig behavior.
Please contact me off-list if you're willing to talk and test.
mdblac...@yahoo.com
Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Please build the current version...that should be fixed already...
https://github.com/Hamlib/Hamlib
Mike W9MDB
On Monday, January 11, 2021, 12:09:09 PM CST, Marco Calistri
wrote:
Dears,
Despite I was confident that by using a "rolling distribution" like Tumbleweed
is, the
We both those tests at the same audio offset?
Try split mode and see if it behaves better.
Mike W9MDB
On Saturday, January 9, 2021, 12:02:50 AM CST, Adrian
wrote:
Testing the two new modes today, I noted that for same power and alc level on
same equipment, I had to set ;
I found the problem with rigctld -- that's been there forever.so should
have been failing on any rig where set_vfo==NULLSee the latest comment
herehttps://github.com/Hamlib/Hamlib/issues/490
I have some tests to run today and should posting the fix today.
Mike W9MDB
On Thursday,
Not completely fixed yet
Turns out that was just one part...working now with an IC706 user and we got
the mode change working now but rigctld isn't working with wsjtx.
But I also need to test this change on another Icom rig tomorrow (IC-7300) to
ensure it works correctly before committing
I'd like to hook up with you and debug this.
Do you do Skype? We can use "Quick Assist" if you are on Windows 10.
Mike
On Thursday, January 7, 2021, 02:17:22 PM CST, Christoph Berg
wrote:
Re: Patrick 9A5CW
> have the same problem.
> If i start the radio in USB mode, manually i
It shouldn't be doing that on every transmit though...just on band change.
It should also be skipping that if you are in split mode.
Mike W9MDB
On Thursday, January 7, 2021, 09:07:00 AM CST, Bill Somerville
wrote:
On 07/01/2021 14:44, Josh Rovero wrote:
64-bit on Fedora Core
erg wrote:
Re: Black Michael via wsjt-devel
> So if you do an "ldd" on the executables they all point to the same
> libhamlib ?
$ ldd /usr/bin/wsjtx | grep hamlib
libhamlib.so.4 => /lib/x86_64-linux-gnu/libhamlib.so.4
(0x7f556f2a)
$ ldd /
Maybe I should move up the 4.1 release date or do a 4.0.1?
Mike W9MDB
On Wednesday, January 6, 2021, 07:40:05 AM CST, Bill Somerville
wrote:
On 06/01/2021 13:28, Black Michael via wsjt-devel wrote:
> There is a binary incompatibility that happened under shared library
>
So if you do an "ldd" on the executables they all point to the same libhamlib ?
If that's true please provide some debug info from rigctld so we can see the
problem. What I suspect you'll see is it's asking for "VFO_SUB" which is the
behavior we've seen with the problemthat's the common
.
I was hoping that rigctld-wsjtx does work correctly...did you try that one?
Mike W9MDB
On Wednesday, January 6, 2021, 07:42:32 AM CST, Christoph Berg
wrote:
Re: Black Michael via wsjt-devel
> Does the Debian WSJT-X use hamlib as a shared library?
> Sounds like that may be the p
Does the Debian WSJT-X use hamlib as a shared library?
Sounds like that may be the problem.
There is a binary incompatibility that happened under shared library use so if
you use the rigctld-wsjtx from WSJTX it should hopefully worknot the
rigctld from hamlib-4.0
There's a future fix that
My complements on RC3 -- I was experiencing frequency audio dropouts with my
ANAN 100, Thetis, and VBCable but RC3 has not shown any dropouts today.I was
also able to reduce the buffer sizes in Thetis which helps on latency.
So far QSOs have been rock solid with no repeat messages (possibly due
C:\WSJT\wsjtxrc3\bin>wsjtx_app_version.exe -vWSJT-X 2.3.0-rc3
C:\WSJT\wsjtxrc3\bin>wsjtx_app_version.exe --helpUsage: wsjtx_app_version.exe
[options]
Options: -?, -h, --help Displays help on commandline options. --help-all
Displays help including Qt specific options. -v, --version
Yup...Winders 10on two different computers.
Mike
On Tuesday, January 5, 2021, 10:43:56 AM CST, Bill Somerville
wrote:
On 05/01/2021 16:36, Black Michael via wsjt-devel wrote:
Windows is showing this for the app name.
Mike W9MDB
Hi Mike,
that's not what
Windows is showing this for the app name.
Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Svein,Could you please contact me off list?
Mike w9mdbmdblac...@yahoo.com
On Tuesday, January 5, 2021, 06:39:26 AM CST, SVEIN BERGSTØL
wrote:
Hi,
I have been using version 2.3.0 since November '20, and it works flawlessly
when runing my radio at home. I can also use a Flex 6600
to
* be modifiable by the application are copied into the struct rig_state,
* which is a kind of private storage of the RIG instance.
my emphasis. The issue is not with the clients it lies firmly in the court of
the library developers.
73
Bill
G4WJS.
On 31/12/2020 14:32, Black Michael via wsjt-
I don't believe that solves the problem.
If one refers to data structures in code you can't rely on shared libraries.
You need to stick to the API.
Mike W9MDB
On Thursday, December 31, 2020, 08:30:04 AM CST, Christoph Berg
wrote:
Re: Black Michael via wsjt-devel
> Seems we
Seems we had a problem on Linux WSJT-X builds as they are using the hamlib
shared library instead of static build.I've already recommended they switch to
static.
The problem crept up where one version of hamlib worked but another was getting
the wrong value for rig->caps->vfo_list since the
ecember 27, 2020, 08:39:55 AM CST, Adrian
wrote:
It is still in the green zone and AGC is off. I find it beneficial on very weak
signals,
but I may play with lower levels.
On 28/12/20 12:03 am, Black Michael via wsjt-devel wrote:
Your bandwidth looks great... From
wer levels.
On 28/12/20 12:03 am, Black Michael via wsjt-devel wrote:
Your bandwidth looks great... From the quick glance I could get of the WSJT-X
signal level it appears your RF gain is too high...you should set so you see
30dB on the WSJT-X meter on a quiet spot (like 5KHz below)
Your bandwidth looks great...From the quick glance I could get of the WSJT-X
signal level it appears your RF gain is too high...you should set so you see
30dB on the WSJT-X meter on a quiet spot (like 5KHz below)
Mike W9MDB
On Sunday, December 27, 2020, 02:29:18 AM CST, Adrian
wrote:
See if this thread helps...
https://groups.io/g/FTDX101D/topic/ftdx101_with_wsjt_x/34274193?20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,34274193
Mike W9MDB
On Saturday, December 26, 2020, 07:43:22 AM CST, Joe wrote:
Hi guys,
a well known OM has problems to get his Yaesu FT-DX101D
Try the View menu and turn off Astronomical data.
Mike W9MDB
On Friday, December 25, 2020, 08:25:32 PM CST, Marco Calistri
wrote:
Il 25/12/20 22:54, Marco Calistri ha scritto:
Il 25/12/20 22:03, Marco Calistri ha scritto:
Hello,
I just compiled the latest available
When rig is in split mode and you open Settings split mode is still on. Then
doing "Test CAT" turns split mode off regardless of Split Operation setting so
"Test PTT" doesn't test split mode.
Mike W9MDB
___
wsjt-devel mailing list
Forwarding from Andy
In WSJT-X v2.3.0 rc2:Apparently, the regular expression in Radio.cpp named
strict_standard_callsign_re doesn't match 2x1 call signs.
The consequence is that anyone with a 2x1 call can't skip the grid msg by
double-clicking the Tx1 button.
73
Andy
WM8Q
Seems a slight
And what is going to be transmitting this IQ data? Where's the D/A conversion?
Mike W9MDB
On Monday, December 21, 2020, 08:15:23 AM CST, Tim Madden
wrote:
Would it be easiest for the software to have a port for UDP IQ data on both RX
and TX?
Then we only need to add the
There's no practical difference between the 450 and 450D
The 450D is recognized to be the same as the 450.
I'll contact you off-line about debugging the problem.
Mike W9MDB
On Sunday, December 20, 2020, 04:30:18 PM CST, Andras Bato
wrote:
Gentlemen,I can't find my radio in WSJT-X
There are python bindings in hamlib but you have to build them yourself.
https://github.com/Hamlib/Hamlib
./bootstrap./configure --with-python-bindingmake install
Example use in in bindings/pytest.py and pytest3.py
Mike W9MDB
On Tuesday, December 8, 2020, 05:23:37 PM CST, Loyd via
to me that the problem of version 2.30.0 r2 does not identify a name
with an accent as a user, as in my case Jesús. This did not happen with all
previous versions until 2.30.0 r1
I trust you can solve the problem for me.
Cordially,
Jesus, EA1YR
El vie, 4 dic 2020 a las 15:09, Black Michael via wsjt
Open a cmd prompt
cd \wsjt\wsjtx\binwsjtx -r test
See if that starts...if it does your WSJT-X.ini file is corruptedplease
send the WSJT-X.ini file and maybe Bill can figure out what's corrupted.
Mike W9MDB
On Friday, December 4, 2020, 07:57:29 AM CST, Jesús Gutiérrez Rodríguez
RC2 seems to missing date/time from ALL.TXT -- I don't recall seeing this
reported.
7.074 Rx FT8 -13 0.4 1160 K4DKW K0KC R+007.074 Rx FT8 -11 0.5 1577
JA6RCH KG5HKC EM137.074 Rx FT8 -18 0.4 1082 W9FFF KC4UCT -167.074 Rx FT8
-16 0.3 1497 VE3CCD KI5IPM EM227.074 Rx FT8 -17 0.4
I've had several instances where I get no audio from WSJT-X at alljust
about daily.I can toggle the playback audio device and it comes backor a
restart of WSJT-X works.So it appears that it is losing the connection to the
playback audio device without giving an error.
It's talking to VB
Seems the current version rc2 (and perhaps older versions) doesn't shrink
vertically as far as it used to.
Would prefer to be able to shrink it vertically -- really down to almost
nothing on the decode lines so we can gain more vertical real estate.
Mike W9MDB
rigctld is the server piece.
In WSJT-X it is rigctld-wsjtx
"rigctld -l" gives a list of models. Find your rig model and then do this
replacing model# with your rig model#.
rigctld-wsjtx -m model# -r com1 -s 19200Adjust com port and baud rate to suit.
You can connect remotely to it with the
There has been a patch to hamlib which likely addresses this.
Should be in next release.
Mike W9MDB
On Sunday, November 29, 2020, 11:43:02 AM CST, Alan Groups
wrote:
Hi, running 2.3.0 RC2, Kenwood TS590S:
- Double click a station to call it
- Rig goes into Tx
- Click
What works.
In QSOpartner sends RRR or RR73 a 2nd time and you double-click then RR73
or 73 is selected to transmit.
What doesn't workAfter you send your first RR73/73 you start a QSO with someone
elseprevious partner resends RRR or RR73...you double-click and you get
TX1.It's been this
Jarmo...did you get my email about sending debug info?
Mike W9MDB
On Wednesday, November 25, 2020, 07:48:07 AM CST, jarmo
wrote:
Hi Bill
Forgot details, attach that picture
Jarmo
___
wsjt-devel mailing list
Man page was updated to add this.
Having a bandwidth "Default" or "No Change" option would be nice. A majority
of rigs have the ability to set Default.
Mike W9MDB
On Monday, November 23, 2020, 12:41:34 AM CST, Saku wrote:
HI Bill!
That could make sense. I usually operate only CW
Versions.cmake is missing from the tar file.
Mike W9MDB
On Sunday, November 15, 2020, 11:12:10 AM CST, Stefan Wernli
wrote:
Hi,
I get an error when compiling the new rc2 on debian testing. 2.3.0-rc1
compiles successfully on the same system.
-- Building wsjtx v2.3.0.0-rc2
--
Barry said his reply was rejected so forwarding this to the list for him.
Mike W9MDB
- Forwarded Message - From: Barry Jackson To:
Black Michael Sent: Friday, November 13, 2020, 06:25:03 PM
CSTSubject: Fwd: [wsjt-devel] FT-991A problem
Hi Michael,
This reply was rejected from the
Forwarded from the JTSDK email list...Steve has put in a lot of work updating
things to get all the projects compiling correctly.
Mike W9MDB
Hi Folks,
Archives of JTSDK 3.1.1.x Releases attempts will now be placed in a
"Deprecated" folder in the "Files" Section. Links in earlier messages may
I just helped him and that's exactly what we had to do.
VSPManager was giving a permission error on a registry key.
Mike W9MDB
On Friday, November 6, 2020, 10:48:04 AM CST, Neil Zampella
wrote:
It is NEVER a good idea to run 'as Administrator' as that raises the
permissions of the
What kind of error are you getting?
Works fine herebut I'm using EltimaI'll get a copy of VSPMgr and make
sure it works too.
Mike W9MDB
On Friday, November 6, 2020, 06:41:27 AM CST, Dan Malcolm
wrote:
If I run either PowerSDR or Thetis as an interface to my ANAN 100D,
What happens if he turns the rig power and wsjt-x power all the way to
zerono watts out.
Sounds a lot like RFI.
Also...try setting the audio out to the computer speakers and see if the USB
still drops out.
Mike W9MDB
On Thursday, November 5, 2020, 04:34:41 PM CST, Barry Jackson via
https://wsjtx.groups.io/g/main/message/16844
Mike W9MDB
On Tuesday, October 27, 2020, 03:27:05 PM CDT, David Kaplan via wsjt-devel
wrote:
I’m running Catalina 10.15.7 and a few weeks ago saw a notice that for the new
beta the shmmax had to be increased. I carefully flagged and
3 AM CDT, Bill Barrett
wrote:
Not seeing any Hard Faults/sec in the resource manager.LatencyMon shows hard
faults mostly for Flex SSDR and a few for WSJT-X and JT9.Flex software is
running around 1.3 gig.
Bill W2PKY
On Tue, Oct 20, 2020 at 9:49 AM Black Michael via wsjt-devel
wrote:
On Tue, Oct 20, 2020 at 9:49 AM Black Michael via wsjt-devel
wrote:
Use Resource Monitor and look for the Memory "Hard Faults/sec".
16Gig doesn't sound like a lot of memory to me when running 8 instances of
WSJT-X and other programs.
Any hard faults means you're using swap space.Check your
, 2020, 09:15:50 AM CDT, Bill Somerville
wrote:
On 20/10/2020 14:51, Bill Somerville wrote:
On 20/10/2020 14:44, Black Michael via wsjt-devel wrote:
Any hard faults means you're using swap space.
Mike,
that's incorrect information, the most common cause of hard page faults
Use Resource Monitor and look for the Memory "Hard Faults/sec".
16Gig doesn't sound like a lot of memory to me when running 8 instances of
WSJT-X and other programs.
Any hard faults means you're using swap space.Check your available swap space
too -- the old Unix rujle was swap was to be at
Can you guys confirm the behavior?Looks like I can modify hamlib pretty easily
to achieve restoring the band settings from the band stack.
But what happens if you change band settings on the rig and change bands. Do
you need to put it in the band stack yourself or are the settings always
Also...this sounds a lot like either a memory leak or memory fragmentation.
That error message means the underlying allocation in the system was unable to
get a large enough memory block to satisfy WSJT-X's needs.
So either your memory usage is eating up all the memory or memory has
fragmented
Do you have an older hamlib installed on your system?
You must have an old rig.h laying around.
Mike W9MDB
On Monday, September 28, 2020, 07:19:19 AM CDT, Richard Shaw
wrote:
Looking at building test packages for Fedora and ran into this:
That implies your /dev device isn't part of the dialout group.
Look at it and it probably isn't owned by the dialout groupls -l
/dev/ttyUSB*crw-rw 1 root dialout 188, 0 Sep 22 15:54 /dev/ttyUSB0
If not,chgrp dialout /dev/ttyUSB*
Mike W9MDB
On Wednesday, September 23, 2020, 08:12:39
Hz is a good choice.
73
Bill
G4WJS.
On 07/09/2020 04:56, Black Michael via wsjt-devel wrote:
Unless you have an Elecraft rig you really don't want any or very minimal
ALC to avoid harmonics. Zero ALC pretty much guarantees you won't be
generating harmonics. Most rigs can do very
Unless you have an Elecraft rig you really don't want any or very minimal ALC
to avoid harmonics. Zero ALC pretty much guarantees you won't be generating
harmonics.Most rigs can do very close to full power without showing ALC.
Two of us wrote a paper on how to set your audio which works on
You are following these directions, right?
$ mkdir ~/hamlib-prefix$ cd ~/hamlib-prefix$ git clone
git://git.code.sf.net/u/bsomervi/hamlib src$ cd src$ git checkout integration$
./bootstrap$ mkdir ../build$ cd ../build$ ../src/configure
--prefix=$HOME/hamlib-prefix \ --disable-shared
Rename your hamlib source directory.
The do the git clone over the same name...let's say your directory is called
"src".
mv src src.oldgit clone https://github.com/Hamlib/Hamlib.git src
cd src./bootstrap
Then you should be able to build as usual.
Mike W9MDB
On Sunday, September 6, 2020,
You're not using the most recent source.
https://github.com/Hamlib/Hamlib
And no...you don't change the debug level during compiling. It's a run-time
setting and I do believe WSJT-X shows WARN and higher so that's why you see it
right now and that has been fixed now.
Mike W9MDB
On
What debug level are you running? They are at the TRACE level now which should
be 5 v's.
Mike W9MDBfind . -name "*.c" -exec grep "PTT RTS" {} \; -print
rig_debug(RIG_DEBUG_TRACE, "%s: PTT RTS debug#1\n",
__func__);./src/rig.c
find . -name "*.c" -exec grep "debug#" {} \; -print
Yes.
Mike
On Saturday, September 5, 2020, 07:22:36 AM CDT, Marco Calistri
wrote:
Il 05/09/20 09:05, Black Michael ha scritto:
> Was put in a while ago when debugging some PTT issues.
> I've fixed it.
>
> Mike W9MDB
>
>
>
> On Saturday, September 5, 2020, 06:58:37 AM CDT, Marco
Was put in a while ago when debugging some PTT issues.I've fixed it.
Mike W9MDB
On Saturday, September 5, 2020, 06:58:37 AM CDT, Marco Calistri
wrote:
Il 04/09/20 19:03, Bill Somerville ha scritto:
> On 04/09/2020 22:58, Marco Calistri wrote:
>> Hello,
>>
>> I'm suddenly noticing the
Setting the mode in WSJT-X rigs settings to Data/Pkt doesn't work?
Mike W9MDB
On Thursday, August 27, 2020, 02:15:45 PM CDT, Alexey Popov
wrote:
Hi all!
I have some trouble.My Yaesu FT-991 connected over usb to PC.
Rig configured properly, "Test CAT" worked properly. "Test PTT"
That error indicates that /usr/local/bin/wsprd does not exist.The error is from
execvpnot from wsprd
Mike W9MDB
On Saturday, August 22, 2020, 06:52:52 AM CDT, Bill Somerville
wrote:
On 22/08/2020 12:41, alaw...@mudhawk.com wrote:
HI Folks,
I'll start out by
The auto power on will change in the next release of WSJT-X.
If you want the rig to power on you'll have to provide a new switch
"--set-conf=auto_power_on=1
There is no auto power off yet but you can do that yourself by sending the
command "set_powerstat 0"
Mike W9MDB
On Friday, August
don't have the ability to tell you what model they are so the
frequency ranges are really just informational and not used to restrict any
rx/tx abilityl
Mike W9MDB
On Friday, July 24, 2020, 09:05:41 AM CDT, Claude Frantz
wrote:
On 7/24/20 3:15 PM, Black Michael via wsjt-devel wrote:
> I've
I've been looking for somebody who cares about the itu_region stuff.
Claude -- why are you using that parameter? It really doesn't do anything. I
know some are using frequency ranges but nobody using the itu_region option.
Mike W9MDB
On Friday, July 24, 2020, 07:54:30 AM CDT, Bill
Those should all be functional in WSJT-X 2.2.2 -- I have several report of
things working for all 3 of those rigs.
There are just a few exceptions which have been recently fixed for a slow Mac
on the FT-857/897 and VFO tuning in gpredict for the FT-817.
So if you're having problems with WSJT-X
There's another solution should work well.
What logging app are you using? If it supports hamlib (like Log4OM) there's
one solution, if not there's another solution via hamlib.
#1 You can use FLRig to control your rig
#2 Hook WSJT-X up to FLRig
#3 Run "rigctld -m 4 -vvv -Z" -- this will show
ding conducting
technical investigations"
My emphasis.
73
Bill
G4WJS.
On 17/07/2020 13:58, Black Michael via wsjt-devel wrote:
> "Informed choices". I appreciate the humor.many ops have no idea what's
>supposed to work
>
> What I was referring to th
sues
Mike W9MDB
On Friday, July 17, 2020, 08:12:53 AM CDT, Christoph Berg
wrote:
Re: Black Michael via wsjt-devel
> What I was referring to though was a flag that is "known" to be true. Perhaps
> for both for split and data/pkt. WSJT-X would default to enab
it. I'd
rather keep the basic simplicity and flexibility instead of trying to manage
their whole World for them.
73
Bill
G4WJS.
On 17/07/2020 13:42, Black Michael via wsjt-devel wrote:
> Bill..maybe WSJT-X could use the availability of the "rig_set_split" to
>enable/disable
:11, Black Michael via wsjt-devel wrote:
> If anybody has a rig out there that's in this list and you have it working
>with WSJT-X...or if you have any bugs to report working with WSJT-X please let
>me know.
> Would like to promote as many of these to stable as possible and WSJT-X
If you try a TS-790 can you set split mode on the rig? We need to find out if
it's supported.
It hasn't been implemented for the TS-711 and I can't find a CAT manual for
that rig.
Mike W9MDB
On Thursday, July 16, 2020, 10:43:53 AM CDT, Jari A wrote:
TS-711 (2m multimode)
2.2.2
s worked just fine for me with WSJT Hamlib. No unexpected problems.
> Only thing that did surprise me was the auto turn on of it when starting
> WSJT. Never happened until one of the 2.2 versions.
>
> Fred
> N2XK
>
> On Jul 16, 2020 8:32 AM, Black Michael via wsjt-devel
&
just fine for me with WSJT Hamlib. No unexpected problems.
Only thing that did surprise me was the auto turn on of it when starting WSJT.
Never happened until one of the 2.2 versions.
Fred
N2XK
On Jul 16, 2020 8:32 AM, Black Michael via wsjt-devel
wrote:
> I can't think of any reason the preamp
ion
> as many cannot post here due to the lack of maintenance at that site ].
>
> HAM - Help All mankind. We are here to help and progress learning. I also
> hope that the intent of this post is clear and that it is to help.
>
> 73
>
> Steve I
> VK3VM / VK3SIR
&
If anybody has a rig out there that's in this list and you have it working with
WSJT-X...or if you have any bugs to report working with WSJT-X please let me
know.
Would like to promote as many of these to stable as possible and WSJT-X is one
of a couple programs that exercises a rig pretty
JTAlert can autostart programs
Mike W9MDB
On Monday, July 13, 2020, 04:19:31 PM CDT, Tripp Sanders
wrote:
I looked through the Autoruns and there is nothing that should be starting it
there I also use jtalert. Would that do something?
On Mon, Jul 13, 2020 at 4:14 PM Bill
Steve,Are you saying all you have to do is install the package, or run it?
What does the CPU usage look like when the problem surfaces?
As I recall that computer is a dual core so trying to run USB audio, USB cat
control, and network I/O might be a bit of a push for that computer.
Mike W9MDB
thought that there are enough FT-818NDs out their with WSJT-X to say that
there's no issue.
Note I cannot say much about the FT-817ND backend as in the Hamlib shipped
with WSJT-X v2.2.2 that model is broken as is the FT-897.
73
Bill
G4WJS.
On 02/07/2020 13:21, Black Michael via wsjt-devel
e the drop down list for rig set up in wsjt x. I also use a
flex 6600 which has worked flawlessly with wsjt x every time. Thank you for
all of your hard work.Robn1trk
On Thu, Jul 2, 2020 at 9:25 AM Black Michael via wsjt-devel
wrote:
"get on the list" for what?When you
T-X to say that
there's no issue.
Note I cannot say much about the FT-817ND backend as in the Hamlib shipped
with WSJT-X v2.2.2 that model is broken as is the FT-897.
73
Bill
G4WJS.
On 02/07/2020 13:21, Black Michael via wsjt-devel wrote:
Bill..have you found the FT-818ND to be
Bill..have you found the FT-818ND to be compatible with the FT-817ND
backend?Perhaps should add that to the riglist so they don't feel like orphans.
Mike W9MDB
On Thursday, July 2, 2020, 07:15:04 AM CDT, Bill Somerville
wrote:
On 02/07/2020 13:02, Claude Frantz wrote:
On 7/2/20
401 - 500 of 1443 matches
Mail list logo