[Dx4win] PSK31 window
A while back (a year?) there were a few emails on problems with the PSK31 window from both WC2L and PY2YP. I think I am reliving them. I launch PSK and a blank window appears with no function buttons, no waterfall, nothing. The screen does have the standard background color (light blue). It can be resized and that is about it. Although the solution was to load in a backup copy of the config.dat., I am wondering if a cause had ever been found or documented. 73 Jim KS1J __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 window
The PSK31 (ALT-3) window became complete blank when adjusting it's size. To have it back I must go to PREFERENCES | LOAD CONFIGURATION FILE. Do I have something wrong to my setup? Can someone try this, please? -- 73 DX de PY2YP - Cesar __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSk31
I have a K3, Microkeyer II and DX4WIN. I have been trying to get PSK31 to work. I can receive. I see call signs etc., When I try to answer a CQ, I hear what appears to be a signal and my call is printing. I cq and get no response. I feel that the something is missing.. Any suggestions? Bob Bob Garceau, W1EQ DXCC Honor Roll Triple Play Award #5 DXCC Challenge 2149 band/countries Ex. K1YRP, USA-CA All Counties #342 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 with K3/DX4WIN
Hi,While I am on vacation, my friend, F1AYO, who has just purchased and installed DX4WIN, tries to make it work on PSK31 mode with is K3 transceiver. He tried two connections between his PC and K3:- USB on PC connector to K3 RS232 port via Prolific USB/RS232 interface- USB on PC connected to the Signal Link USB interface, whose USB output goes to K3 RS232 port via Prolific converter. After starting DX4WIN, K3 frequency is correctly shown and followed. Opening PSK31 window on DX4WIN, he has both scope and waterfall displays and the PSK31 audio signals received from K3 are well shown and correctly decoded. PROBLEM: - no PTT on K3 with different DX4WIN PSK31 and DX4WIN Preferences configurations when PSK31 TX activated - tried to key via VOX activated on K3: no PTT either - forced K3 on TX via push-button: no TX modulation on transmit (TX AF is supposed to modulate K3 via one of RS232 input pins; maybe VOX doesn't trigger as there is no TX audio) I will try to help Antoine via phone (I had never used any K3 radio and do not know its features/configurations; Antoine says the K3 setup is rather complicated). So,if some K3/DX4WIN user has a good PSK31 working configuration, I would appreciate the info that contains: -- connection between PC and K3 via USB or Signal Link (I do not know this one either :) ! )- setup of DX4WIN Preferences related to radio, keying , CW and PSK31 parameters.- any particular K3 setup procedure in order to make it work on PSK31 with DX4WIN Thanks in advance ! 73, Radi F6GNZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31
For some reason, he says it isn't doing that like mine does. Told him to try and reinstall it. John On 1/12/2015 1:03 PM, Erkki Heikkinen wrote: John, When you have the psk window open, click on a call and the call will go to the callsign field and the mode will update to psk. Took me some time to find out... 73 Erkki OH2BF -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Tom Carrubba KA2D Sent: Monday, January 12, 2015 8:40 PM To: DX4WIN Subject: Re: [Dx4win] PSK31 Hi John Log it, then F10 to update and change mode to PSK31. 73 -Tom KA2D -Original Message- From: W9RPM Sent: Monday, January 12, 2015 1:20 PM To: DX4WIN Subject: [Dx4win] PSK31 Hi, Helping a friend set up DX4WIN for PSK31. He can transmit and receive fine, but when he clicks on a call in the PSK31 window it fills in the QSO window with the call, but leaves the Mode as SSB instead of changing it to PSK31. How does he get it so it says PSK31 in the Mode box? Thanks, John -- EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL IM: W9RPM YAHOO: W9RPM __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL IM: W9RPM YAHOO: W9RPM __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31
John, When you have the psk window open, click on a call and the call will go to the callsign field and the mode will update to psk. Took me some time to find out... 73 Erkki OH2BF > -Original Message- > From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On > Behalf Of Tom Carrubba KA2D > Sent: Monday, January 12, 2015 8:40 PM > To: DX4WIN > Subject: Re: [Dx4win] PSK31 > > > > Hi John > > Log it, then F10 to update and change mode to PSK31. > > 73 -Tom KA2D > > -Original Message- > From: W9RPM > Sent: Monday, January 12, 2015 1:20 PM > To: DX4WIN > Subject: [Dx4win] PSK31 > > Hi, Helping a friend set up DX4WIN for PSK31. He can transmit and > receive fine, but when he clicks on a call in the PSK31 > window it fills > in the QSO window with the call, but leaves the Mode as SSB > instead of > changing it to PSK31. How does he get it so it says PSK31 in > the Mode box? > > Thanks, John > > -- > EMAIL: j...@w9rpm.com > WEBPAGE: http://www.w9rpm.com/ > Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ > DX and CONTEST CLUB: http://www.w9idx.com/ > La Crosse Hams: http://www.lacrossehams.org/ > AOL IM: W9RPM > YAHOO: W9RPM > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31
Hi John Log it, then F10 to update and change mode to PSK31. 73 -Tom KA2D -Original Message- From: W9RPM Sent: Monday, January 12, 2015 1:20 PM To: DX4WIN Subject: [Dx4win] PSK31 Hi, Helping a friend set up DX4WIN for PSK31. He can transmit and receive fine, but when he clicks on a call in the PSK31 window it fills in the QSO window with the call, but leaves the Mode as SSB instead of changing it to PSK31. How does he get it so it says PSK31 in the Mode box? Thanks, John -- EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL IM: W9RPM YAHOO: W9RPM __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31
Hi, Helping a friend set up DX4WIN for PSK31. He can transmit and receive fine, but when he clicks on a call in the PSK31 window it fills in the QSO window with the call, but leaves the Mode as SSB instead of changing it to PSK31. How does he get it so it says PSK31 in the Mode box? Thanks, John -- EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL IM: W9RPM YAHOO: W9RPM __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 Setup - v8.04 - Pro III - MicroHam USB Interface III (Windows Vi sta)
Ups!! Joe probably means you should check dx4win file>preferences>control => psk sound card 73 Kostas SV1DPI Στις 8/6/2013 8:53 μμ, ο/η Joe Subich, W4TV έγραψε: See the example configuration for DX4Win and USB Interface III in the USB Interface II area at www.microHAM-USA.com/support.html or in Router at Help | Download Documents. Make sure the PSK31 window in DXLab Suite has selected "Speaker (USB Audio CODEC)" as the transmit sound card and your transceiver is in the proper mode for audio via the "line" input. 73, ... Joe, W4TV On 6/8/2013 1:22 PM, Fred - NA2U wrote: My setup used to work with PSK31 but for some reason it doesn't work now. I was unable to locate help online. Rig receives PSK31 FB but I'm not transmitting. I would appreciate suggestions on how to set up PSK31, please. 73 and thanks from the desert, Fred/NA2U "Wretched excess is just barely enough." __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 Setup - v8.04 - Pro III - MicroHam USB Interface III (Windows Vi sta)
See the example configuration for DX4Win and USB Interface III in the USB Interface II area at www.microHAM-USA.com/support.html or in Router at Help | Download Documents. Make sure the PSK31 window in DXLab Suite has selected "Speaker (USB Audio CODEC)" as the transmit sound card and your transceiver is in the proper mode for audio via the "line" input. 73, ... Joe, W4TV On 6/8/2013 1:22 PM, Fred - NA2U wrote: My setup used to work with PSK31 but for some reason it doesn't work now. I was unable to locate help online. Rig receives PSK31 FB but I'm not transmitting. I would appreciate suggestions on how to set up PSK31, please. 73 and thanks from the desert, Fred/NA2U "Wretched excess is just barely enough." __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Setup - v8.04 - Pro III - MicroHam USB Interface III (Windows Vi sta)
My setup used to work with PSK31 but for some reason it doesn't work now. I was unable to locate help online. Rig receives PSK31 FB but I'm not transmitting. I would appreciate suggestions on how to set up PSK31, please. 73 and thanks from the desert, Fred/NA2U "Wretched excess is just barely enough." __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 alternate software
There are several pieces of software to implement PSK31. Can any one of them be used with DX4WIN? If you use software different from that which comes along with DX4WIN, do you lose functionality? For example, the ability to click on a call sign in the PSK31 window and have it drop into the QSO window. Thanks for the advice. Ed, AA9OZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 with DX4WIN
Merry Christmas I think that the problem is your soundcard audio output to radio data or mic input. Radio reads audio input either back side (only digital) either in mic. Also search what is happended to your soundcars. Usb iii had its own soundcard so probably something has changed in the computer. Search this also. There is also a chance something happened and computer has lost the microham soundcard. Unplug it both usb and power (if it has) and plug it again. Also make a restart. 73 kostas sv1dpi - Original Message - From: "Fred - NA2U" To: Sent: Sunday, December 25, 2011 2:47 AM Subject: [Dx4win] PSK31 with DX4WIN > I'm using DX4WIN v8.04 with Pro III and microham USB III interface. I > have successfully operated PSK31 before with this setup. This morning I > tried again and it appears that I'm receiving OK but the rig, while it > shows the red transmit light is on, does not seem to be transmitting. I > have made no configuration changes of which I'm aware but for now no > PSK31. > > I have unsuccessfully searched the web for info and I'm coming up empty. > Any ideas on what I can check to get this going again? > > 73 and thanks, > > Fred/NA2U > "Wretched excess is just barely enough." > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 with DX4WIN
I'm using DX4WIN v8.04 with Pro III and microham USB III interface. I have successfully operated PSK31 before with this setup. This morning I tried again and it appears that I'm receiving OK but the rig, while it shows the red transmit light is on, does not seem to be transmitting. I have made no configuration changes of which I'm aware but for now no PSK31. I have unsuccessfully searched the web for info and I'm coming up empty. Any ideas on what I can check to get this going again? 73 and thanks, Fred/NA2U "Wretched excess is just barely enough." __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 Questions
you can see my psk macros here http://users.otenet.gr/~sv1dpi/en/articles/dx4win.html 73 Kostas sv1dpi - Original Message - From: "Bob Garrett" To: "'Mike Streeter'" ; "'Bud Semon N7CW'" ; Sent: Sunday, November 20, 2011 3:42 AM Subject: [Dx4win] PSK31 Questions > Greetings Listers, > > Ok, I'm a new guy to digital and especially PSK31. I am using a MicroHam > Digi Keyer II, DX4win and using the PSK31 window within DX4win along with > my > FTDX-5000. > > 1. how do I change the TX and RX frequencies? Currently at 1612 and > this > is out of the default passband for my transceiver plus, it is way to high > pitch for me. Somewhere in the 1000 or less is preferred. When I first > got > on this afternoon, it was between 620 and 900, no rhyme or reason to the > changes and now it is hovering in the 1610 to 1615 range. > > 2 How do I reconfigure the macros for cq etc. > > Any and all help appreciated. 73, Bob K3UL > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Questions
Greetings Listers, Ok, I'm a new guy to digital and especially PSK31. I am using a MicroHam Digi Keyer II, DX4win and using the PSK31 window within DX4win along with my FTDX-5000. 1. how do I change the TX and RX frequencies? Currently at 1612 and this is out of the default passband for my transceiver plus, it is way to high pitch for me. Somewhere in the 1000 or less is preferred. When I first got on this afternoon, it was between 620 and 900, no rhyme or reason to the changes and now it is hovering in the 1610 to 1615 range. 2 How do I reconfigure the macros for cq etc. Any and all help appreciated. 73, Bob K3UL __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 + DX4WIN + Elecraft K3 NO JOY!!!!!
I am frustrated because I can't make the above combination work. DX4WIN decodes PSK31 tones as one would expect, but it will NOT transmit. Briefly my settings are: DX4WIN: Radio Elecraft K3 X4 38400 baud on COM 1 CW WINKEY on COM 7 DTR nil RTS PTT Control (all above set in Preferences) PSK31 window: TX PTT CONTROL using RTS K3 MENU MIC SEL: PF.H MIC + LIN: ON CONFIG LIN OUT: 010 PTT-KEY: RTS-OFF What really puzzles me is that I have three other programs on this machine that do PSK31 with these setups and they ALL work very well. What am I doing wrong with DX4WIN??? BTW: Running INTEL 3.6 GHz Windoze XP SP3 DX4WIN 8.05 default on board sound card (REALTEK) Thanks __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 + DX4WIN + Elecraft K3 NO JOY!!!!!
So John, What are you trying to say??? . I used to be indecisive. Now I’m not sure - Original Message From: John Scott To: dx4win@mailman.qth.net Sent: Thu, March 17, 2011 5:36:18 PM Subject: [Dx4win] PSK31 + DX4WIN + Elecraft K3 NO JOY! __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 + DX4WIN + Elecraft K3 NO JOY!!!!!
__ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 + DX4WIN + Elecraft K3 NO JOY!
__ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31
I very occasionally want to use PSK31, but each time I need to be retrained. No problem receiving signals, but transmit mode always seems to elude me. Last time, I wrote down the specifics---and misplaced them. Please aid this aging hippie. If you have a K3 (I know to set the Mic input to LineIn) and use DX4WIN as your general logger and PSK31 interface--and even better if you also use a MicroHam keyer--please contact me directly and help me get this straight once and for all. Garry, NI6T __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 mode
Hi All When the sound card is used, it is necessary to adjust the clock usually. However, the adjustment method is not found in PSK31 of dx4win. The demodulate performance is very bad. Is it you how? de JE2UFF __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 submission
Hello, I did the following submission procedure for the DXCC: 1. Clear submitted in REPORTS | REPORT GENERATOR |AWARD FLAGS | DXCC BAND 2. Uncheck DXCC | DIGITAL in REPORTS | REPORT GENERATOR |AWARDS | DXCC 3. Run SUBMISSION Reading the generated submission report I found out a digital mode QSO to be submitted, this one is actually a PSK31 QSO, which mode counts as digital for DXCC purposes. Question: is this OK? I mean the PSK31 does count as digital mode? Am I doing something wrong? -- 73 DX de PY2YP - Cesar __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 mode in real time logging
On 2/4/2010 5:24 AM, Erkki Heikkinen wrote: > DX4Win 8.03: > When logging in real time mode, the log mode used to be automatically > PSK31 when the PSK window was open. > > I don't know why it suddenly shows the radio mode (SSB) although the PSK > window is open. I have tried everything including rebooting, but no joy. > > What am I missing? > > 73 Erkki OH2BF I have not tried this lately, but the way it used to work for me was to double-click on the callsign you want to log WITHIN the PSK-31 window. Then DX4WIN will start logging that call, and set the mode to PSK31. Does that still work? - Jim -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 mode in real time logging
DX4Win 8.03: When logging in real time mode, the log mode used to be automatically PSK31 when the PSK window was open. I don't know why it suddenly shows the radio mode (SSB) although the PSK window is open. I have tried everything including rebooting, but no joy. What am I missing? 73 Erkki OH2BF __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 - how to transmit?
Slight edit to what I said above. Message should read as follows: Thanks to US Interface/Navigator's Clint Hurd, KK7UQ, for resolving my issue - how to key the PTT line when using DX4WIN's PSK31 capability. By telephone, Clint patiently reviewed all my comm port settings and methodically worked through to a solution (including downloading DX4WIN 8.03). The answer turned out to be surprisingly simple. Use the same comm port used by the Navigator to control Ham Radio Deluxe. (Specifically, I entered comm port 5 in the CW tab of Setup Parameters, and selected "PTT Control" in the PSK31 settings (Alt+S in the PSK31 window)...and voila. My thanks to Clint and to all the others who responded. Dave, W2PK __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 - how to transmit?
Thanks to US Interface/Navigator's Clint Hurd, KK7UQ, for resolving my issue - how to key the PTT line when using DX4WIN's PSK31 capability. By telephone, Clint patiently reviewed all my comm port settings and methodically worked through to a solution (including downloading DX4WIN 8.03). The answer turned out to be surprisingly simple.use the same comm port used by the Navigator to control Ham Radio Deluxe. (Specifically, I entered comm port 5 in the CW tab of Setup Parameters, and entered it again in the PSK31 settings (Alt+S in the PSK31 window...and voila.) My thanks to Clint and to all the others who responded. Dave, W2PK __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 - how to transmit?
The ACC connector in the rear. It is the same connector for every Icom rig I have ever used: pin 3, ACC 1 (Pin 3, ACC 2 would also work). Actually... that's not strictly true... the really old Icoms used a 24 pin accessory connector... but I used an adapter to simulate the two ACC plugs with my 751A so I was sill using pin 3 ;-) David M. Monfried wrote: > Mel, > > Thank you. May I ask a follow-up question, then? I assume you control the > 7700 via another com port, which is connected to the rig's RS232 jack, > right? If so, where does the second com port line, used for PTT, plug into > the 7700? In my case, my single RS232 is used for rig control and the remote > jack is used to control the SteppIr antenna. > > I think I'm getting close here, but there's something very obvious - and > very simple - that's missing! > > 73, > Dave > > -Original Message- > From: Mel [mailto:ve...@videotron.ca] > Sent: Tuesday, January 12, 2010 9:10 AM > To: David M. Monfried; DX4WIN > Subject: Re: [Dx4win] PSK31 - how to transmit? > > I use a COM port to control PTT with my 7700. It is the same setup I > used with my older IC781. Newer Icoms like the 7700 and 7800 can switch > to transmit under software control via the CI-V bus but I don't think > D4W supports it yet... or if it does, I don't know how to make it work. > > David M. Monfried wrote: >> Searched the archives but could not find the answer to this simple(?) >> problem - I'm unable to key the IC7800 using the PSK31 function in DX4WIN >> 7.05.04. I am able to decode signals, but can't figure out what I'm doing >> wrong on transmit. Here's the set-up: >> >> >> >> IC7800 + Navigator (in file/Preferences/Control, tried both Default Sound >> Card and Cards 0 and 1 in PSK Sound Card). >> >> >> >> Presently control radio via com port 7; tried Stop Radio and using com > port >> 7 ( PSK31 window/ Alt+S /TX/com 7, then tried PTT and VOX). Nothing. >> >> >> >> Control SteppIr antenna via Remote jack on IC7800. >> >> >> >> Successfully use HRD with DM780 - but give up DX4WIN control of rig to HRD >> when I want to operate RTTY or PSK31.that's why I'd like to get the PSK31 >> function going on DX4WIN. >> >> >> >> I assume I'm missing something elementary - a cable connection or software >> setting. If I have to add a PTT connection, I don't see where it would >> terminate on the radio. >> >> >> >> Any help would be much appreciated. Thank you. >> >> >> >> Dave, W2PK >> >> >> >> >> >> >> >> >> >> >> >> >> >> __ >> Dx4win mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dx4win@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 - how to transmit?
I use a COM port to control PTT with my 7700. It is the same setup I used with my older IC781. Newer Icoms like the 7700 and 7800 can switch to transmit under software control via the CI-V bus but I don't think D4W supports it yet... or if it does, I don't know how to make it work. David M. Monfried wrote: > Searched the archives but could not find the answer to this simple(?) > problem - I'm unable to key the IC7800 using the PSK31 function in DX4WIN > 7.05.04. I am able to decode signals, but can't figure out what I'm doing > wrong on transmit. Here's the set-up: > > > > IC7800 + Navigator (in file/Preferences/Control, tried both Default Sound > Card and Cards 0 and 1 in PSK Sound Card). > > > > Presently control radio via com port 7; tried Stop Radio and using com port > 7 ( PSK31 window/ Alt+S /TX/com 7, then tried PTT and VOX). Nothing. > > > > Control SteppIr antenna via Remote jack on IC7800. > > > > Successfully use HRD with DM780 - but give up DX4WIN control of rig to HRD > when I want to operate RTTY or PSK31.that's why I'd like to get the PSK31 > function going on DX4WIN. > > > > I assume I'm missing something elementary - a cable connection or software > setting. If I have to add a PTT connection, I don't see where it would > terminate on the radio. > > > > Any help would be much appreciated. Thank you. > > > > Dave, W2PK > > > > > > > > > > > > > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 - how to transmit?
Hello David and HNY first of all i am not familiar with your hardware But i know abt dx4win... To have psk working needs to setup these FIle>preferences>control tab and setup the psk card. Better not choose the default but the right one both in receiveing and transmitting. If you have a mistake in tx, your rig will make ptt but you will have not a sound out and finally not pwr. FIle>preferences>cw and setup your interface where says "software cw keying/PTT control". Becareful to have the right com port and possibly under rts line the ptt control. When you hit alt+3 psk window will be up. with alt+s you can see some psk settings. Change the right one under tx (if needed) there is nothing else needs a setup in dx4win. If you have checked these and psk is not working look for something in your trx or interface. 73 Kostas sv1dpi - Original Message - From: "David M. Monfried" To: Sent: Tuesday, January 12, 2010 4:36 PM Subject: [Dx4win] PSK31 - how to transmit? > Searched the archives but could not find the answer to this simple(?) > problem - I'm unable to key the IC7800 using the PSK31 function in DX4WIN > 7.05.04. I am able to decode signals, but can't figure out what I'm doing > wrong on transmit. Here's the set-up: > > > > IC7800 + Navigator (in file/Preferences/Control, tried both Default Sound > Card and Cards 0 and 1 in PSK Sound Card). > > > > Presently control radio via com port 7; tried Stop Radio and using com > port > 7 ( PSK31 window/ Alt+S /TX/com 7, then tried PTT and VOX). Nothing. > > > > Control SteppIr antenna via Remote jack on IC7800. > > > > Successfully use HRD with DM780 - but give up DX4WIN control of rig to HRD > when I want to operate RTTY or PSK31.that's why I'd like to get the PSK31 > function going on DX4WIN. > > > > I assume I'm missing something elementary - a cable connection or software > setting. If I have to add a PTT connection, I don't see where it would > terminate on the radio. > > > > Any help would be much appreciated. Thank you. > > > > Dave, W2PK > > > > > > > > > > > > > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 - how to transmit?
Searched the archives but could not find the answer to this simple(?) problem - I'm unable to key the IC7800 using the PSK31 function in DX4WIN 7.05.04. I am able to decode signals, but can't figure out what I'm doing wrong on transmit. Here's the set-up: IC7800 + Navigator (in file/Preferences/Control, tried both Default Sound Card and Cards 0 and 1 in PSK Sound Card). Presently control radio via com port 7; tried Stop Radio and using com port 7 ( PSK31 window/ Alt+S /TX/com 7, then tried PTT and VOX). Nothing. Control SteppIr antenna via Remote jack on IC7800. Successfully use HRD with DM780 - but give up DX4WIN control of rig to HRD when I want to operate RTTY or PSK31.that's why I'd like to get the PSK31 function going on DX4WIN. I assume I'm missing something elementary - a cable connection or software setting. If I have to add a PTT connection, I don't see where it would terminate on the radio. Any help would be much appreciated. Thank you. Dave, W2PK __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 bug
This is actually carried forward from V7. I think it was a "feature" intended to help... but it creates a problem. Alt-R "Center Radio" is an important command to center a signal in the radio passband. However, it also resets the mode to USB causing the data mode to be switched off. This is a BIG pain in the... neck ;-) Is there something we can do in the Rig File? I don't think so... but... Otherwise... could Paul please remove this unnecessary and troublesome mode set command. Thanks... Mel... VE2DC __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Won't Key K3
Version 7.07.02 If both CW and Radio ports in DX4WIN Preferences are changed to None, then PSK31 can be set to Com 5 (the K3 port) and it will key the K3. However, this leaves no control of the radio (K3) and is not a viable solution. It test just proves, I think, that DX4WIN is not allowing itself and PSK31 to use the same radio port. Does anybody have PSK31 working with the K3 radio? If so, what am I doing wrong. Help please from anybody. 73, Bud W3LL w...@arrl.net - Original Message - From: "Bud Governale, W3LL" To: Sent: Saturday, August 08, 2009 11:54 AM Subject: [Dx4win] PSK31 Won't Key K3 1. The radio is a K3. The DX4WIN radio selection in preferences is "Elecraft K3 X4". DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. 2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT control setting. Still not keying the transmitter. 3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control. This setting works for sending CW. In PSK31 Settings I have keying line set to DTR and PTT set to PTT control. No transmitter keying with this setup. If I change PSK31 PTT to Com 5 I get the "device already open" error. I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. I still don't know how to key the K3 transmitter in PSK31. Bud W3LL w...@arrl.net - Original Message - From: "ON4AOI" To: "'Bud Governale, W3LL'" Sent: Saturday, August 08, 2009 10:11 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 1 what radio do you have ? If not needed uncheck DTR and RTS Select ptt control in psk31 setting Setup dx4win-cw via same port like radio is With correct setting of keyline and ptt for dtr and rts Guy > -Oorspronkelijk bericht- > Van: Bud Governale, W3LL [mailto:w...@arrl.net] > Verzonden: zaterdag 8 augustus 2009 15:58 > Aan: ON4AOI > Onderwerp: Re: [Dx4win] PSK31 Won't Key K3 > > Guy, > > Thanks for the suggestion. > > The PSK31 com port was set on VOX. I changed it to the radio com port > which is com 5. > > When I did this I get the following message: > > "An exception occurred device is already open". > > DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and > RTS are checked. > > I think we now have a conflict with DX4WIN claiming Com 5 and PSK31 > also trying to claim Com 5. This is just a guess by > me. > > What do I do to fix this? > > 73, > > Bud W3LL > w...@arrl.net > > > - Original Message - > From: "ON4AOI" > To: "'Bud Governale, W3LL'" > Cc: > Sent: Saturday, August 08, 2009 1:26 AM > Subject: RE: [Dx4win] PSK31 Won't Key K3 > > > Make sure you set the correct comport for PSK31 > Right click in psk31 window next to the shortcuts > and there you can change the settings > > Guy ON4AOI > > > -Oorspronkelijk bericht- > > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > > boun...@mailman.qth.net] Namens Bud Governale, W3LL > > Verzonden: zaterdag 8 augustus 2009 3:03 > > Aan: dx4win@mailman.qth.net > > Onderwerp: [Dx4win] PSK31 Won't Key K3 > > > > I'm trying to setup PSK31 using DX4WIN Version 7.07.02. > > > > When I hit the TX button I hear the tones but the K3 does not go into > > transmit. > > > > DX4WIN works perfectly in both MMTTY and CW. It keys and sends in > both > > of those modes. > > > > What do I need to do to get DX4WIN PSK31 to key the K3? > > > > 73, > > > > Bud W3LL > > w...@arrl.net > > > > __ > > Dx4win mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Dx4win@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 Won't Key K3
Bud, If someone helps your or you finally master the problem, please share as I am experiencing the same and cannot figure it out. I have tried to suggested software, which supposedly supports multiple software programs all using the same COM port with no success thus far. Previously, (Kenwood 570D) I used a Rigblaster pro and that allowed everything to work with a single COM port (CW, PSK, SSB and RTTY). Thus far I am making slow progress with K3 (wonderful radio). - Tony , N3ME - -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bud Governale, W3LL Sent: Saturday, August 08, 2009 16:55 PM To: dx4win@mailman.qth.net Subject: [Dx4win] PSK31 Won't Key K3 1. The radio is a K3. The DX4WIN radio selection in preferences is "Elecraft K3 X4". DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. 2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT control setting. Still not keying the transmitter. 3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control. This setting works for sending CW. In PSK31 Settings I have keying line set to DTR and PTT set to PTT control. No transmitter keying with this setup. If I change PSK31 PTT to Com 5 I get the "device already open" error. I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. I still don't know how to key the K3 transmitter in PSK31. Bud W3LL w...@arrl.net - Original Message - From: "ON4AOI" To: "'Bud Governale, W3LL'" Sent: Saturday, August 08, 2009 10:11 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 1 what radio do you have ? If not needed uncheck DTR and RTS Select ptt control in psk31 setting Setup dx4win-cw via same port like radio is With correct setting of keyline and ptt for dtr and rts Guy > -Oorspronkelijk bericht- > Van: Bud Governale, W3LL [mailto:w...@arrl.net] > Verzonden: zaterdag 8 augustus 2009 15:58 > Aan: ON4AOI > Onderwerp: Re: [Dx4win] PSK31 Won't Key K3 > > Guy, > > Thanks for the suggestion. > > The PSK31 com port was set on VOX. I changed it to the radio com port > which is com 5. > > When I did this I get the following message: > > "An exception occurred device is already open". > > DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and > RTS are checked. > > I think we now have a conflict with DX4WIN claiming Com 5 and PSK31 > also trying to claim Com 5. This is just a guess by > me. > > What do I do to fix this? > > 73, > > Bud W3LL > w...@arrl.net > > > - Original Message - > From: "ON4AOI" > To: "'Bud Governale, W3LL'" > Cc: > Sent: Saturday, August 08, 2009 1:26 AM > Subject: RE: [Dx4win] PSK31 Won't Key K3 > > > Make sure you set the correct comport for PSK31 > Right click in psk31 window next to the shortcuts > and there you can change the settings > > Guy ON4AOI > > > -Oorspronkelijk bericht- > > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > > boun...@mailman.qth.net] Namens Bud Governale, W3LL > > Verzonden: zaterdag 8 augustus 2009 3:03 > > Aan: dx4win@mailman.qth.net > > Onderwerp: [Dx4win] PSK31 Won't Key K3 > > > > I'm trying to setup PSK31 using DX4WIN Version 7.07.02. > > > > When I hit the TX button I hear the tones but the K3 does not go into > > transmit. > > > > DX4WIN works perfectly in both MMTTY and CW. It keys and sends in > both > > of those modes. > > > > What do I need to do to get DX4WIN PSK31 to key the K3? > > > > 73, > > > > Bud W3LL > > w...@arrl.net > > > > __ > > Dx4win mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Dx4win@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.406 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Won't Key K3
1. The radio is a K3. The DX4WIN radio selection in preferences is "Elecraft K3 X4". DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. 2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT control setting. Still not keying the transmitter. 3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control. This setting works for sending CW. In PSK31 Settings I have keying line set to DTR and PTT set to PTT control. No transmitter keying with this setup. If I change PSK31 PTT to Com 5 I get the "device already open" error. I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. I still don't know how to key the K3 transmitter in PSK31. Bud W3LL w...@arrl.net - Original Message - From: "ON4AOI" To: "'Bud Governale, W3LL'" Sent: Saturday, August 08, 2009 10:11 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 1 what radio do you have ? If not needed uncheck DTR and RTS Select ptt control in psk31 setting Setup dx4win-cw via same port like radio is With correct setting of keyline and ptt for dtr and rts Guy > -Oorspronkelijk bericht- > Van: Bud Governale, W3LL [mailto:w...@arrl.net] > Verzonden: zaterdag 8 augustus 2009 15:58 > Aan: ON4AOI > Onderwerp: Re: [Dx4win] PSK31 Won't Key K3 > > Guy, > > Thanks for the suggestion. > > The PSK31 com port was set on VOX. I changed it to the radio com port > which is com 5. > > When I did this I get the following message: > > "An exception occurred device is already open". > > DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and > RTS are checked. > > I think we now have a conflict with DX4WIN claiming Com 5 and PSK31 > also trying to claim Com 5. This is just a guess by > me. > > What do I do to fix this? > > 73, > > Bud W3LL > w...@arrl.net > > > - Original Message - > From: "ON4AOI" > To: "'Bud Governale, W3LL'" > Cc: > Sent: Saturday, August 08, 2009 1:26 AM > Subject: RE: [Dx4win] PSK31 Won't Key K3 > > > Make sure you set the correct comport for PSK31 > Right click in psk31 window next to the shortcuts > and there you can change the settings > > Guy ON4AOI > > > -Oorspronkelijk bericht- > > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > > boun...@mailman.qth.net] Namens Bud Governale, W3LL > > Verzonden: zaterdag 8 augustus 2009 3:03 > > Aan: dx4win@mailman.qth.net > > Onderwerp: [Dx4win] PSK31 Won't Key K3 > > > > I'm trying to setup PSK31 using DX4WIN Version 7.07.02. > > > > When I hit the TX button I hear the tones but the K3 does not go into > > transmit. > > > > DX4WIN works perfectly in both MMTTY and CW. It keys and sends in > both > > of those modes. > > > > What do I need to do to get DX4WIN PSK31 to key the K3? > > > > 73, > > > > Bud W3LL > > w...@arrl.net > > > > __ > > Dx4win mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Dx4win@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK31 Won't Key K3
Make sure you set the correct comport for PSK31 Right click in psk31 window next to the shortcuts and there you can change the settings Guy ON4AOI > -Oorspronkelijk bericht- > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > boun...@mailman.qth.net] Namens Bud Governale, W3LL > Verzonden: zaterdag 8 augustus 2009 3:03 > Aan: dx4win@mailman.qth.net > Onderwerp: [Dx4win] PSK31 Won't Key K3 > > I'm trying to setup PSK31 using DX4WIN Version 7.07.02. > > When I hit the TX button I hear the tones but the K3 does not go into > transmit. > > DX4WIN works perfectly in both MMTTY and CW. It keys and sends in both > of those modes. > > What do I need to do to get DX4WIN PSK31 to key the K3? > > 73, > > Bud W3LL > w...@arrl.net > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Won't Key K3
I'm trying to setup PSK31 using DX4WIN Version 7.07.02. When I hit the TX button I hear the tones but the K3 does not go into transmit. DX4WIN works perfectly in both MMTTY and CW. It keys and sends in both of those modes. What do I need to do to get DX4WIN PSK31 to key the K3? 73, Bud W3LL w...@arrl.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Do not decode
Hello ! Suddenly my PSK31 window do not decode anything, all signals appear on the screen and using Mixw I can decode everything, but with DX4WIN psk31 engine it is impossible. Any idea? Rtty works properly, but I don't know why Psk31 doesn't decode anything. Please help! Thanks Rick EA4ZK __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
RE: [Dx4win] PSK31 and WinXP sp3
No such problem here with XP Pro. Until now I have only found a couple of shortcut links in Outlook, which stopped working. 73, Kjell, PB3SM - SM6CPI > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of IZ5FSA > Sent: 12 May 2008 11:09 > To: dx4win@mailman.qth.net > Subject: [Dx4win] PSK31 and WinXP sp3 > > I've updated my Xp Home edition with the sp3. The only bug > I've found is the > PSK31 windows: it don't show the spectrum and/or waterfall scope. > Did Anybody else find this problem? > > 73s de Leo, IZ5FSA > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 and WinXP sp3
I've updated my Xp Home edition with the sp3. The only bug I've found is the PSK31 windows: it don't show the spectrum and/or waterfall scope. Did Anybody else find this problem? 73s de Leo, IZ5FSA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 HELP WITH A SIGNALINK USB...
Hi, I would like to run PSK31 through DX4WIN, but I am having problems setting-up my Tigertonics Signalink USB. I've got it working fine on Digipan as a separate App, so I know everything works, but I would prefer to use the PSK31 software as part of DX4WIN. I can't seem to get DX4WIN to recognise the SL1 USB soundcard interface - Can anyone help? For the record, I'm running Win XP, FT-857D AND DX4WIN Ver 7.02.15. Thanks in advance, Laurence, M0LSK. Email: [EMAIL PROTECTED] From [EMAIL PROTECTED] Mon Jun 25 09:31:52 2007 From: [EMAIL PROTECTED] (Ernie Walls) Date: Mon Jun 25 09:38:39 2007 Subject: [Dx4win] Connecting Icom IC746 to a PC Message-ID: <[EMAIL PROTECTED]> I have a problem that my limited computer skills simply are not coping with! I am setting up a computer for my friend, and am trying to get a IC746 to talk to his computer. Despite ALL of the various software computations tried, none will make the Icom talk to DX4Win - DX4Win simply says that the 'Radio timed out'. I loaded Ham Radio Deluxe on to his computer, did the set up, and presto - the Icom cheerfully talks away to HRD. It took all of 90 seconds to achieve. BTW, tried all this (ie all of the above) on various ports, via serial, and also with USB - same result, always. No go for DX4Win, OK for HRD! As an aside, his version of DX4Win is 6.04, mine is 7.03 - makes no difference. So, may I conclude that the hardware is OK - now for the software!! I am using the latest version of XP - by that, I meant, as far as I am aware, the very latest XP update has been downloaded to my computer. Is there some setting within XP that I should alter? Other than this small effort at understanding! What the problem might be, I have no clue as to what may be my problem. Can anyone be of assistance, please. Ernie Ernie Walls VK3FM [EMAIL PROTECTED] [EMAIL PROTECTED]
[Dx4win] PSK31 and K2
Hello, Thanks for the replies on the PSK31. I had the RIGblaster Plus running my K2 before I moved 4 years ago. I finally found the unit tucked away in a box that I thought had only manuals in it. Anyway, I got the RIGblaster Plus up and running with my K2 on PTT. I am using the DX4WIN 7.02.15 program and I had to figure out the different codes for the buffers. First QSO was with HP1 in Panama running the K2 @ 5 watts into a ground mounted Butternut HF9V with 120 radials on the ground. Once again, thanks for the help. 72 and Thanks, Ron Polityka WB3AAL www.wb3aal.com www.n3epa.org
[Dx4win] PSK31 and K2
I believe the Rigblaster manuals are on their web site - or so I've been told. 73, Duane On Tue, 10 Apr 2007 20:20:26 -0400 "Ron Polityka" <[EMAIL PROTECTED]> writes: > Hello, > > I finally found my RIGblaster plus unit but I can't find my book. > > Just playing around with the RIGblaster I can receive via the sound > card > with out any problems with DX4Win. I placed the K2 into VOX and I go > to > transmit and all seems fine but it does not send anything. Then I > tell the > unit to receive but it will not receive unit I take the Mic jack out > of the > front of the K2 or close the PSK31 window. > > Anyone else using the K2 and RIGblaster plus for PSK31? > > Onto looking for the manual. > > Thanks, > Ron Polityka > WB3AAL > www.wb3aal.com > www.n3epa.org/ > > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > -- Duane Calvin, AC5AA Austin, Texas http://www.ac5aa.com From [EMAIL PROTECTED] Tue Apr 10 22:36:30 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Tue Apr 10 22:40:58 2007 Subject: [Dx4win] DX4WIN.CTY #38 released 10 April 2007 In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> At 10:12 PM 4/10/2007, Dick Flanagan wrote: >At 04:50 PM 4/10/2007, you wrote: > >DX4WIN.CTY Release #38 is now available from: > >The QSL Manager for N8S appears to have changed. With the new >country file, the manager is listed as K3LP, not YT1AD (Previous log >entries still show YT1AD, but new ones show K3LP). Darn - I don't know how I missed that one. Thanks, Dick. Everyone, edit the QSL manager database, File -> Databases -> QSL Managers. Find the entry for N8S dated 11 April 2007 via K3PD. Control-Delete to delete it, then File -> Save Changes and Exit. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
[Dx4win] PSK31 and K2
Hello, I finally found my RIGblaster plus unit but I can't find my book. Just playing around with the RIGblaster I can receive via the sound card with out any problems with DX4Win. I placed the K2 into VOX and I go to transmit and all seems fine but it does not send anything. Then I tell the unit to receive but it will not receive unit I take the Mic jack out of the front of the K2 or close the PSK31 window. Anyone else using the K2 and RIGblaster plus for PSK31? Onto looking for the manual. Thanks, Ron Polityka WB3AAL www.wb3aal.com www.n3epa.org/
[Dx4win] PSK31 Window and microHam DigiKeyer
--- Duane A Calvin <[EMAIL PROTECTED]> wrote: > Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep > getting errors when I assign the sound card to the DigiKeyer's sound card > - says the device is already allocated. Tried changing from VOX to PTT, > but no help. Seems to be centered on the sound card choice, and it being > "busy" already. Hi Duane, It worked for me right out of the box. It sounds like you may have a conflict on the COM port used for PTT. Check your radio, RTTY and CW preferences to make sure you are not using this COM port anywhere. Check the Control preferences to make sure you are selecting the correct PSK sound card. When you right-click somewhere in the PSK-31 window, there is a Settings option near the top of one of the menus. TX is where you set the PTT COM port. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Wed Jun 21 11:10:30 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed Jun 21 11:17:50 2006 Subject: [Dx4win] FO/F6CTL Message-ID: <[EMAIL PROTECTED]> The latest DX4WIN country file (Release 30) does not have the right information for FO/F6CTL. FO/F6CTL/M is mapped to Marquesas, the call should be FO/F6CTL (no /M) I assume the same will happen with Austral islands. This will be fixed in Release 31. If you want to fix it yourself, close your log, then File -> Databases -> Countries. Find Marquesas, click on the Callsign tab, then find FO/F6CTL/M starting 20 June 2006. Change it to FO/F6CTL and click on Calls -> Update (this last step is important). Do the same for Austral Islands and FO/F6CTL/A, changing it to FO/F6CTL. When you are done, File -> Save Changes and Exit. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Wed Jun 21 15:44:06 2006 From: [EMAIL PROTECTED] (John Shaw) Date: Wed Jun 21 15:51:40 2006 Subject: [Dx4win] PSK31 Window and microHam DigiKeyer In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Here is a little gem that gave me some grief in this area, not related to the device you are using, but DX4WIN it self. PTT Delay: A zero value indicates that PTT keying is not used. Note this came from the help file of 7.02, couldn't find it in 7.04 but I guess it still applies. I thought DX4WIN was broken until I read that and changed the zero value. I was getting some really strange results even when not using PTT. Hope this info may be of help in your case. 73 John ZL1BYZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: Thursday, 22 June 2006 2:23 a.m. To: Duane A Calvin; dx4win@mailman.qth.net Subject: Re: [Dx4win] PSK31 Window and microHam DigiKeyer --- Duane A Calvin <[EMAIL PROTECTED]> wrote: > Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep > getting errors when I assign the sound card to the DigiKeyer's sound card > - says the device is already allocated. Tried changing from VOX to PTT, > but no help. Seems to be centered on the sound card choice, and it being > "busy" already. Hi Duane, It worked for me right out of the box. It sounds like you may have a conflict on the COM port used for PTT. Check your radio, RTTY and CW preferences to make sure you are not using this COM port anywhere. Check the Control preferences to make sure you are selecting the correct PSK sound card. When you right-click somewhere in the PSK-31 window, there is a Settings option near the top of one of the menus. TX is where you set the PTT COM port. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 Window and microHam DigiKeyer
Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep getting errors when I assign the sound card to the DigiKeyer's sound card - says the device is already allocated. Tried changing from VOX to PTT, but no help. Seems to be centered on the sound card choice, and it being "busy" already. 73, Duane -- Duane Calvin, AC5AA Austin, Texas http://home.austin.rr.com/ac5aa From [EMAIL PROTECTED] Wed Jun 21 07:09:48 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed Jun 21 07:17:23 2006 Subject: [Dx4win] QRZ CD?!! Message-ID: <[EMAIL PROTECTED]> At 09:14 PM 6/20/2006, J.F. Samuels wrote: >Hamad, my QRZ always shows the countries. It is the newest, Summer 2006 and >it is stored on disk. The DLL hasn't been changed since 2003. When I >searched on "QRZ32.DLL", I found many versions, and most were out-of-date. >I have copied the newest one from QRZ to all the libraries. You are right, the latest version(s) of QRZ do display the COUNTRY in the F3 window. Hamad, 9K2HN was asking about the US COUNTY. That is *not* displayed at my station either. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
[Dx4win] PSK31 rx problem solved !!
Bill, Many thanks for your investigation. I recently upgraded from 6.04 to 7.01 and found that i could only read about 50% of any qso.I investigated and found that the version of 7.01 that I downloaded also had the psk core file 115. Now I have downloaded pskcore119, it prints out very FB! I was thinking I had messed something up until I saw your posting. Many Thanks es 73 Andy G3SVD -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bill Clark Sent: Friday, November 11, 2005 1:46 PM To: dx4win@mailman.qth.net Subject: [Dx4win] PSK31 rx problem solved !! I finally contacted the author of the .dll used in Dx4win and Moe advised me to see if I had the latest version of the PSK .dll file. I only recently upgraded to 7.01 version of Dx4win and I found that I had an older version included in the program. The version of the .dll in the program was 1.1.5.0 and the newest was 1.1.9.0. After downloading and installing the latest version from http://www.qsl.net/ae4jy/pskcoredll.htm all was well. I can just about print ESP now. Heckuva deal, works great. This solved my problem but don't know if this should be a change for everyone or not. But anyway thanks to Moe and Steve for the help. 73 BILL-W5VW ___ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://www.myway.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 rx problem solved !!
I finally contacted the author of the .dll used in Dx4win and Moe advised me to see if I had the latest version of the PSK .dll file. I only recently upgraded to 7.01 version of Dx4win and I found that I had an older version included in the program. The version of the .dll in the program was 1.1.5.0 and the newest was 1.1.9.0. After downloading and installing the latest version from http://www.qsl.net/ae4jy/pskcoredll.htm all was well. I can just about print ESP now. Heckuva deal, works great. This solved my problem but don't know if this should be a change for everyone or not. But anyway thanks to Moe and Steve for the help. 73 BILL-W5VW ___ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://www.myway.com
[Dx4win] PSK31 Key Release Failure
Hello, While I am in the PSK31 window, I press the CQ marco. After the CQ is finished, the program will not let the PTT release. The radio stays in tx. I checked the macro and the at the end of the string, I have the %e that should send the esc command and let the radio go. Any ideas? Thanks Ron KK7GO From [EMAIL PROTECTED] Tue Sep 6 18:20:57 2005 From: [EMAIL PROTECTED] ([EMAIL PROTECTED]) Date: Tue Sep 6 18:28:03 2005 Subject: [Dx4win] Additional Info on the PSK31 Message-ID: <[EMAIL PROTECTED]> I forgot to mention that I have the setting for the tx set to the correct comport and DTR is checked. Thanks From [EMAIL PROTECTED] Tue Sep 6 18:31:00 2005 From: [EMAIL PROTECTED] (Larry Alkoff) Date: Tue Sep 6 18:36:29 2005 Subject: [Dx4win] PSK31 Key Release Failure In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> [EMAIL PROTECTED] wrote: > Hello, > > While I am in the PSK31 window, I press the CQ marco. After the CQ is > finished, the program will not let the PTT release. The radio stays in tx. I > checked the macro and the at the end of the string, I have the %e that should > send the esc command and let the radio go. Any ideas? > > Thanks > > Ron > KK7GO A similiar thing has happened to me. Have you ever had rf problems in the shack? Try an rf choke on the serial and PTT lines. -- Larry Alkoff N2LA - Austin TX Using Thunderbird on Slackware Linux From [EMAIL PROTECTED] Tue Sep 6 23:09:13 2005 From: [EMAIL PROTECTED] (Joe Giacobello) Date: Tue Sep 6 23:14:50 2005 Subject: [Dx4win] Re: K4MD Cluster problem. Message-ID: <[EMAIL PROTECTED]> Joe, all mysteries eventually find an explanation! All is working FB now. 73, Joe Joe Simpkins wrote: >No problem here, but I bet you missed changing the telnet address to >the current one. It is:K4MD.no-ip.comBe sure it is inserted >in your DX4WIN program as the default address for telnet access. >Hope that fixes your problem! >73, >Joe K4MD > >-Original Message- >From: Joe Giacobello [<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] >Sent: Tuesday, September 06, 2005 9:59 AM >To: <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >Subject: Cluster problem. > >Joe, I have not been able to connect to K4MD via telnet (DX4WIN), >although I am able to connect to W4ML w/o a problem. I get an "apro >exception" error when trying to connect to K4MD. I am able to >access K4MD via the CDXA web site. > >Are you having a problem, or is it at this end? > >73, Joe >K2XX
[Dx4win] PSK31 and FT1000MP MKV FIELD
This is the kind of information that is needed in an appendix or user guide for DX4WIN... John, K2CIB - Original Message - From: "Kostas SV1DPI" <[EMAIL PROTECTED]> To: "REFLECTOR dx4win" Sent: Monday, January 03, 2005 5:48 PM Subject: Re: [Dx4win] PSK31 and FT1000MP MKV FIELD > My mark v works fine. > when you press and hold the PKT button then the mark v turns to user mode. > the bad thing is that the lamps pkt+lsb are still on same as before, but > really it is in user mode. > then in menu 8-6 set the last choise EASY-SET to SSTV-U. > The manual is not so good on these things.. > the site www.va3cr.net has the above solution and it works fine. Search > for > psk settings and voila... > the direct link is > > http://www.va3cr.net/settings%20and%20troubleshooting/AFSK%20&%20soundcard%2 > 0setup%20with%20Ft1000mp.html > > Kostas SV1DPI > > > From: "Radivoj KAR" <[EMAIL PROTECTED]> > To: "'Milan G?tter'" <[EMAIL PROTECTED]> > Cc: > Sent: Monday, January 03, 2005 9:36 PM > Subject: RE: [Dx4win] PSK31 and FT1000MP MKV FIELD > > > Milan, > FT1000MP can't be set for PKT/USB either. I had to use SSB/USB mode and > inject PSK31 audio into the microphone input instead in the packet input > connector(otherwise would have to re-calculate PSK31 frequencies on each > band) ! > > 73, > Radi F6GNZ > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Milan G?tter > Sent: Monday, January 03, 2005 6:00 PM > To: Ed Picha; Dx4win@mailman.qth.net > Subject: RE: [Dx4win] PSK31 and FT1000MP MKV FIELD > > Ed, > > the DX4WIN and YAESU MARK-V works not good. > > When using LSB / PKT for PSK31, the Center Radio ALT+R works in opposite > way. > (I'am unable to set MARK-V for PKT and USB. Only to SSB/USB and PSK31, > but this works with large filter only, no narrow filter is possible). > In this point (filter / mode combination) the FT-1000MP was much better. > > I was asking for correction since 5.01 version, but without success. > > My opinion is that the PSK31 with the DX4WIN is not so good > (less sensitive) with comparison to MixW or WinWarbler. > > 73 Milan, OK1FM > > > >>-Original Message- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] Behalf Of Ed Picha >>Sent: Monday, January 03, 2005 2:24 PM >>To: Dx4win@mailman.qth.net >>Subject: [Dx4win] PSK31 and FT1000MP MKV FIELD >> >> >>Hi folks: >> >>Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I >>would love to know how you have the FT1000 configured. I am trying to >>configure the FT1K and I have some questions. My main problem has to do >>with radio behavior when using the CENTER RADIO feature. >> >>thanks, 73 >> >>ed N9EP (n9ep AT amsat.org) >> >>___ >>Dx4win mailing list >>Dx4win@mailman.qth.net >>http://mailman.qth.net/mailman/listinfo/dx4win >>--- >>P??choz? zpr?va neobsahuje viry. >>Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz). >>Verze: 6.0.824 / Virov? b?ze: 562 - datum vyd?n?: 28.12.2004 >> > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
[Dx4win] PSK31 and FT1000MP MKV FIELD
Milan, FT1000MP can't be set for PKT/USB either. I had to use SSB/USB mode and inject PSK31 audio into the microphone input instead in the packet input connector(otherwise would have to re-calculate PSK31 frequencies on each band) ! 73, Radi F6GNZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Milan G?tter Sent: Monday, January 03, 2005 6:00 PM To: Ed Picha; Dx4win@mailman.qth.net Subject:RE: [Dx4win] PSK31 and FT1000MP MKV FIELD Ed, the DX4WIN and YAESU MARK-V works not good. When using LSB / PKT for PSK31, the Center Radio ALT+R works in opposite way. (I'am unable to set MARK-V for PKT and USB. Only to SSB/USB and PSK31, but this works with large filter only, no narrow filter is possible). In this point (filter / mode combination) the FT-1000MP was much better. I was asking for correction since 5.01 version, but without success. My opinion is that the PSK31 with the DX4WIN is not so good (less sensitive) with comparison to MixW or WinWarbler. 73 Milan, OK1FM >-Original Message- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Ed Picha >Sent: Monday, January 03, 2005 2:24 PM >To: Dx4win@mailman.qth.net >Subject: [Dx4win] PSK31 and FT1000MP MKV FIELD > > >Hi folks: > >Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I >would love to know how you have the FT1000 configured. I am trying to >configure the FT1K and I have some questions. My main problem has to do >with radio behavior when using the CENTER RADIO feature. > >thanks, 73 > >ed N9EP (n9ep AT amsat.org) > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win >--- >P??choz? zpr?va neobsahuje viry. >Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz). >Verze: 6.0.824 / Virov? b?ze: 562 - datum vyd?n?: 28.12.2004 > ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 and FT1000MP MKV FIELD
Ed, the DX4WIN and YAESU MARK-V works not good. When using LSB / PKT for PSK31, the Center Radio ALT+R works in opposite way. (I'am unable to set MARK-V for PKT and USB. Only to SSB/USB and PSK31, but this works with large filter only, no narrow filter is possible). In this point (filter / mode combination) the FT-1000MP was much better. I was asking for correction since 5.01 version, but without success. My opinion is that the PSK31 with the DX4WIN is not so good (less sensitive) with comparison to MixW or WinWarbler. 73 Milan, OK1FM >-Original Message- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Ed Picha >Sent: Monday, January 03, 2005 2:24 PM >To: Dx4win@mailman.qth.net >Subject: [Dx4win] PSK31 and FT1000MP MKV FIELD > > >Hi folks: > >Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I >would love to know how you have the FT1000 configured. I am trying to >configure the FT1K and I have some questions. My main problem has to do >with radio behavior when using the CENTER RADIO feature. > >thanks, 73 > >ed N9EP (n9ep AT amsat.org) > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win >--- >P??choz? zpr?va neobsahuje viry. >Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz). >Verze: 6.0.824 / Virov? b?ze: 562 - datum vyd?n?: 28.12.2004 >
[Dx4win] PSK31 and FT1000MP MKV FIELD
Hi folks: Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I would love to know how you have the FT1000 configured. I am trying to configure the FT1K and I have some questions. My main problem has to do with radio behavior when using the CENTER RADIO feature. thanks, 73 ed N9EP (n9ep AT amsat.org)
[Dx4win] PSK31 set up
GM all, Can anyone help me please. I have been using dx4win for PSK31 from my home qth for some time without problem. Now, I am in XE1 land and want to operate PSK but cannot set up the macros with XE1/G3SVD. I suppose this is because the license is for just plain old G3SVD. I have a log set up for XE without difficulty but it won't let me change the call in preferences. 73 Andy XE1/G3SVD From [EMAIL PROTECTED] Mon Sep 27 14:41:20 2004 From: [EMAIL PROTECTED] (JohnD) Date: Mon Sep 27 14:48:01 2004 Subject: [Dx4win] Setting state info Message-ID: <[EMAIL PROTECTED]> I recently worked the CQ WW RTTY contest. After the contest I generated an adif file from my Writelog contest log. I then imported the adif file into DX4WIN. All went well, but the state information all shows up in the "notes for this call" field. Does anyone know an easy way to move this state info to the "state" field? Or, maybe a way to import it so it shows up in the "state" field in the first place? I can certainly do this manually, but that seems pretty tedious. John DeRuiter, WM7A http://members.cox.net/wm7a/
[Dx4win] PSK31 contacts showing up as RTTY?
Rick, PSK31 cards show up as RTTY on my printout from the League. 73, Ed K3IXD Date: Tue, 20 Jul 2004 17:08:39 -0400 From: "Rick Graham" <[EMAIL PROTECTED]> Subject: [Dx4win] PSK31 contacts showing up as RTTY? To: Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="us-ascii" Hi all, I was wondering if PSK31 contacts counted for DXCC, WAS, WAZ, etc. as RTTY since it seems that DX3WIN wants to lump all digital modes into RTTY. Or am I missing something here? 73 DE AI3W, Rick
[Dx4win] PSK31 contacts showing up as RTTY?
Rick: Have a look at the following website. I asked the same question some time back. http://www.arrl.org/awards/dxcc/rules.html#si 73's Brian KA7KUZ - Original Message - From: "Rick Graham" <[EMAIL PROTECTED]> To: Sent: Tuesday, July 20, 2004 2:08 PM Subject: [Dx4win] PSK31 contacts showing up as RTTY? > Hi all, > > I was wondering if PSK31 contacts counted for DXCC, WAS, WAZ, etc. as RTTY > since it seems that DX3WIN wants to lump all digital modes into RTTY. Or am > I missing something here? > > 73 DE AI3W, Rick > > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
[Dx4win] psk31 tx hang up problem
you could try to copy the old parameters in to the new one ...first copy the 6.03 dx4win.ini on a other place , you never know marc on4ma - Original Message - From: "Jay Hainline" <[EMAIL PROTECTED]> To: Sent: Saturday, May 22, 2004 9:53 PM Subject: [Dx4win] psk31 tx hang up problem When I open dx4win.ini in the old ver. 5.03, this is the parameters listed under [PSK31] [PSK31] CenterFreq=1500 MainFreq=1285 FreqChan2=522 Mode=0 AFC=1 Net=1 Smooth=3 AFCRange=150 BaseLine=30 SlowMeter=1 ThreshHold=0 Display=0 Split1=39 Split2=22 Split3=60 KEYING=4 KEYDTR=1 OTHERH=0 CHAN2=0 Scale=1 Under the new version 6.03, these are the parameters: [PSK31] CenterFreq=1500 MainFreq=1490 FreqChan2=1580 Mode=0 AFC=1 Net=1 Smooth=3 AFCRange=100 BaseLine=30 SlowMeter=1 ThreshHold=12 Display=0 Split1=33 Split2=52 Split3=50 KEYCW=3 KEYCWL=0 CHAN2=0 Scale=1 There is a slight difference. KEYING, KEYDTR, OTHERH have been replaced with KEYCW, KEYCWL. Can someone enlighten me? Should I change something here? Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.689 / Virus Database: 450 - Release Date: 21/05/2004
[Dx4win] PSK31 reception problem
I am trying to make PSK31 work in 6.03. All seems fine except that there is nothing in the Rx window unless I transmit something and then that is echo'd there. I do see something that looks as if there is something being printed there in white characters on the white background as the echo'd Tx characters eventually work their way off the top of the screen as one would expect as more text is received. Any suggestions appreciated. Thanks & 73 Stan, N3HS
[Dx4win] PSK31 PTT stuck on TX
So far, no luck. It still hangs up. My Icom is set up on COM1 using a CT-17 interface so my PTT is on COM2 through a rigblaster interface. I tried playing with different settings but to no avail. Something in the program wants to keep the DTR or RTS high for some reason. Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -Original Message- From: STAN1ZX [mailto:[EMAIL PROTECTED] Sent: Saturday, May 22, 2004 18:08 To: [EMAIL PROTECTED] Subject: Re: [Dx4win] PSK31 PTT stuck on TX in File>preferences, check the Radio for type, address, baud rate, comport. check DTR, RTS Next open the psk31 screen and right click on the bottom of the screen and go to in settings click on TX and set to CW Interface and click keyline try that and see if it helps 73 STANN 1 Z X PGP Version:8.0.2 Fingerprint 9543 35A9 8343 F5AA 6353 83BB 6D1E BE23 3D44 7F2C Scanned by Norton Anti Virus System Any Sufficiently Advanced Technology is Indistinguishable from Magic" ---Arthur C. Clarke - Original Message - From: "Jay Hainline" <[EMAIL PROTECTED]> To: Sent: Saturday, May 22, 2004 1:58 PM Subject: RE: [Dx4win] PSK31 PTT stuck on TX nope, that doesn't work. The psk31 transmission ends but the radio stays keyed. Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -Original Message- From: STAN1ZX [mailto:[EMAIL PROTECTED] Sent: Saturday, May 22, 2004 17:49 To: [EMAIL PROTECTED] Cc: N.1.Z.X. Subject: Re: [Dx4win] PSK31 PTT stuck on TX I am not having that problem with the TX being stuck. a couple of things though are you manually clicking on the TX to turn on the Transmitter ? or are you sending from a macro ? if you are running from a macro, you have to include the turn off signal at the end and if you are clicking on TX, it may also require you to unclick, Just a thought 73 STANN 1 Z X PGP Version:8.0.2 Fingerprint 9543 35A9 8343 F5AA 6353 83BB 6D1E BE23 3D44 7F2C Scanned by Norton Anti Virus System Any Sufficiently Advanced Technology is Indistinguishable from Magic" ---Arthur C. Clarke - Original Message - From: "Jay Hainline" <[EMAIL PROTECTED]> To: Sent: Saturday, May 22, 2004 12:15 PM Subject: RE: [Dx4win] PSK31 PTT stuck on TX I have the same problem here Jose. I posted to the reflector the other day but have not received a response back from anyone. I am able to run psk31 using vox but it is not the preferred way for me. Obviously the DTR and RTS are staying high once transmit is started. I have tried switching to either one with no success in the psk31 settings window. There was no problem in version 5.03. 73 Jay Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jose Ng Lee Sent: Saturday, May 22, 2004 15:51 To: Dx4win@mailman.qth.net Subject: [Dx4win] PSK31 PTT stuck on TX Hi, I tried DX4WIN 6.03 PSK31 with setting PTT keying on COM1. My problem with version 6.03 is that after ending the PSK31 transmission the PTT is stuck in TX and doesn't go back to RX. I tried the same setting on old version 5.03 and PSK31 works fine. Also, tried another PSK31 software WINPSKse and PTT TX/RX works fine. Is anyone else experiencing the same PSK31 PTT stuck on TX problem? Thanks, JOSE / HP2CWB ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 PTT stuck on TX
nope, that doesn't work. The psk31 transmission ends but the radio stays keyed. Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -Original Message- From: STAN1ZX [mailto:[EMAIL PROTECTED] Sent: Saturday, May 22, 2004 17:49 To: [EMAIL PROTECTED] Cc: N.1.Z.X. Subject: Re: [Dx4win] PSK31 PTT stuck on TX I am not having that problem with the TX being stuck. a couple of things though are you manually clicking on the TX to turn on the Transmitter ? or are you sending from a macro ? if you are running from a macro, you have to include the turn off signal at the end and if you are clicking on TX, it may also require you to unclick, Just a thought 73 STANN 1 Z X PGP Version:8.0.2 Fingerprint 9543 35A9 8343 F5AA 6353 83BB 6D1E BE23 3D44 7F2C Scanned by Norton Anti Virus System Any Sufficiently Advanced Technology is Indistinguishable from Magic" ---Arthur C. Clarke - Original Message - From: "Jay Hainline" <[EMAIL PROTECTED]> To: Sent: Saturday, May 22, 2004 12:15 PM Subject: RE: [Dx4win] PSK31 PTT stuck on TX I have the same problem here Jose. I posted to the reflector the other day but have not received a response back from anyone. I am able to run psk31 using vox but it is not the preferred way for me. Obviously the DTR and RTS are staying high once transmit is started. I have tried switching to either one with no success in the psk31 settings window. There was no problem in version 5.03. 73 Jay Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jose Ng Lee Sent: Saturday, May 22, 2004 15:51 To: Dx4win@mailman.qth.net Subject: [Dx4win] PSK31 PTT stuck on TX Hi, I tried DX4WIN 6.03 PSK31 with setting PTT keying on COM1. My problem with version 6.03 is that after ending the PSK31 transmission the PTT is stuck in TX and doesn't go back to RX. I tried the same setting on old version 5.03 and PSK31 works fine. Also, tried another PSK31 software WINPSKse and PTT TX/RX works fine. Is anyone else experiencing the same PSK31 PTT stuck on TX problem? Thanks, JOSE / HP2CWB ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 PTT stuck on TX
I have the same problem here Jose. I posted to the reflector the other day but have not received a response back from anyone. I am able to run psk31 using vox but it is not the preferred way for me. Obviously the DTR and RTS are staying high once transmit is started. I have tried switching to either one with no success in the psk31 settings window. There was no problem in version 5.03. 73 Jay Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jose Ng Lee Sent: Saturday, May 22, 2004 15:51 To: Dx4win@mailman.qth.net Subject: [Dx4win] PSK31 PTT stuck on TX Hi, I tried DX4WIN 6.03 PSK31 with setting PTT keying on COM1. My problem with version 6.03 is that after ending the PSK31 transmission the PTT is stuck in TX and doesn't go back to RX. I tried the same setting on old version 5.03 and PSK31 works fine. Also, tried another PSK31 software WINPSKse and PTT TX/RX works fine. Is anyone else experiencing the same PSK31 PTT stuck on TX problem? Thanks, JOSE / HP2CWB ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 PTT stuck on TX
Hi, I tried DX4WIN 6.03 PSK31 with setting PTT keying on COM1. My problem with version 6.03 is that after ending the PSK31 transmission the PTT is stuck in TX and doesn't go back to RX. I tried the same setting on old version 5.03 and PSK31 works fine. Also, tried another PSK31 software WINPSKse and PTT TX/RX works fine. Is anyone else experiencing the same PSK31 PTT stuck on TX problem? Thanks, JOSE / HP2CWB
[Dx4win] psk31
I remember that many times in past it was a squelch problem Take care abt the squelch. Sometimes was too high. But in generally the psk decoder is not the best. I thing that Digipan is much better from 602. Kostas SV1DPI
[Dx4win] PSK31
Bill, I've only operated PSK31 a few times, but a simple way of checking your system's receive function is to just connect a cable DIRECTLY from the fixed audio output jack on the back of the MP to one of your sound card audio inputs, e.g. Mike. You should be able to copy PSK31 with the DX4WIN without a problem. However, make sure that your sound card controls are properly setup. I am using W98 here and you have to go into the audio menu either through the control panel (Multimedia) or the volume (speaker) control icon at the bottom of your screen. If I remember correctly, you have to adjust the parameters under "Recording" to optimize PSK receive. Also, make sure that the audio input that you're using on the sound card is activated, i.e not muted. I'll bet the problem lies in these controls. 73 es GL de Joe Bill Morris wrote: >I am unable to receive PSK 31. The radio is a Yaesu-FT-1000MP connected to a >DELL computer. DX4WIN is working fine at version 6.2 >Is there something that i am missing ? I should be able to receive. But I >can not. >Could not find relevant info in the Archives. Any help would be appreciated. > >73 from KR2S Bill Morris > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win > > > >
[Dx4win] PSK31
I am unable to receive PSK 31. The radio is a Yaesu-FT-1000MP connected to a DELL computer. DX4WIN is working fine at version 6.2 Is there something that i am missing ? I should be able to receive. But I can not. Could not find relevant info in the Archives. Any help would be appreciated. 73 from KR2S Bill Morris
[Dx4win] PSK31 Question
Check your windows volume control panel and see if windows muted the wav channel, if so unmute it and it should work fine. - Original Message - From: "N5PA" <[EMAIL PROTECTED]> To: Sent: Wednesday, 11 February, 2004 7:11 AM Subject: [Dx4win] PSK31 Question Last night I was working PSK31 and encountered some problems. In DX4WIN I could receive fine but could not transmit. In WinPSKse and Digipan, neither would transmit as long as I had DX4WIN running. I am assuming it has something to do with DX4WIN grabbing COM8 where my RigBlaster Pro is located. I can get both WinPSKse and Digipan to work when DX4WIN is not running. I thought I remembered that these programs used to work when DX4WIN was running but I might be mistaken. I was never able to get DX4WIN to transmit on PSK31, though. Any help? 73's Alan, N5PA --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 Question
Last night I was working PSK31 and encountered some problems. In DX4WIN = I could receive fine but could not transmit. In WinPSKse and Digipan, = neither would transmit as long as I had DX4WIN running. I am assuming it has something to do with DX4WIN grabbing COM8 where my RigBlaster Pro is located. I can get both WinPSKse and Digipan to work when DX4WIN is not running. I thought I remembered that these programs used to work when DX4WIN was running but I might be mistaken. I was never able to get = DX4WIN to transmit on PSK31, though. Any help? =20 73's Alan, N5PA --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] PSK31 Menu Problem
Mel, it looks like the problem is solved. Apparently, "Use CW Control" is for VOX operation and the program seeks and finds the proper COM port automatically. It also helped to turn up the VOX gain, which I had all the way down because I never use VOX. The conflict with the manual is what got me into trouble. I had used the program for PSK31 in the past, but I never used an interface. I just used direct connections between the Xcvr and sound card. Everything seems OK now. Thanks for your assistance. 73, Joe Mel wrote: >No it's changed... The options under TX are checkboxes for Net and Use >CW Control > >6.02 doesn't allow a separate COM port for PSK31 PTT control... It uses >the CW PTT. This suits me just fine, but apparently it creates problems >for others... > > > >>-Original Message- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello >>Sent: January 16, 2004 14:44 >>To: Mel >>Cc: DX4WIN >>Subject: Re: [Dx4win] PSK31 Menu Problem >> >> >>Mel, thanks for your help, and you were partially correct. >>By reducing >>the font size from 9 to 6, I was able to have the tab headings show >>their proper labels. However, I still don't get the options that the >>manual says I should. The manual says than under "TX" I should get a >>the options for "NET" and "TX Keying". "TX Keying" then should have >>check boxes in a submenu for "VOX," "CW Interface" and >>"Serial Ports 1 >>thru 8". I get no "TX Keying" option at all! I get instead a check >>box for "Use CW Control". Something is haywire here, because I can't >>select the COM port for my interface. >> >>I should add that I am using version 6.02 and my manual is >>for 6.0. I >>am not aware of any updates for the manual. >> >>Thanks again. >> >>73, Joe >> >>Mel wrote: >> >> >> >>>Check the font selections in screen preferences... >>> >>> >>> >>> >>> >>>>-Original Message- >>>>From: [EMAIL PROTECTED] >>>>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello >>>>Sent: January 15, 2004 17:06 >>>>To: DX4WIN >>>>Subject: [Dx4win] PSK31 Menu Problem >>>> >>>> >>>>I have a very mysterious problem when I try to adjust the TX >>>>(transmit >>>>parameters) settings in the PSK31 window. First of all, the >>>>tabs across >>>>the top of the Settings window is blank; there are no names >>>>on the tabs. >>>>However, except for the TX tab, they all do respond properly >>>>with the >>>>expected options.when they are selected. In the case of >>>> >>>> >>the TX tab, >> >> >>>>some options seem to be absent. The "TX frequency, "" Net" and "CW >>>>control" options are visible, but there is no "TX keying" option as >>>>described in the manual. As a consequence, I'm unable to >>>>select a COM >>>>port for my interface. I've reread the manual and the Help files >>>>several times without success. Does anyone have any insight here? >>>> >>>>Thanks and 73 de Joe >>>> >>>>___ >>>>Dx4win mailing list >>>>Dx4win@mailman.qth.net >>>> >>>> >>http://mailman.qth.net/mailman/listinfo/dx4win >> >> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >>--- StripMime Report -- processed MIME parts --- multipart/alternative >> text/plain (text body -- kept) >> text/html >>The reason this message is shown is because the post was in >>HTML or had an attachment. Attachments are not allowed. To >>learn how to post in Plain-Text go to: >>http://www.expita.com/nomime.html --- >>___ >>Dx4win mailing list >>Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win > > > > --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 Menu Problem
Tnx, Mel. At least you saved me from wasting more time. 73, Joe Mel wrote: >No it's changed... The options under TX are checkboxes for Net and Use >CW Control > >6.02 doesn't allow a separate COM port for PSK31 PTT control... It uses >the CW PTT. This suits me just fine, but apparently it creates problems >for others... > > > >>-Original Message- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello >>Sent: January 16, 2004 14:44 >>To: Mel >>Cc: DX4WIN >>Subject: Re: [Dx4win] PSK31 Menu Problem >> >> >>Mel, thanks for your help, and you were partially correct. >>By reducing >>the font size from 9 to 6, I was able to have the tab headings show >>their proper labels. However, I still don't get the options that the >>manual says I should. The manual says than under "TX" I should get a >>the options for "NET" and "TX Keying". "TX Keying" then should have >>check boxes in a submenu for "VOX," "CW Interface" and >>"Serial Ports 1 >>thru 8". I get no "TX Keying" option at all! I get instead a check >>box for "Use CW Control". Something is haywire here, because I can't >>select the COM port for my interface. >> >>I should add that I am using version 6.02 and my manual is >>for 6.0. I >>am not aware of any updates for the manual. >> >>Thanks again. >> >>73, Joe >> >>Mel wrote: >> >> >> >>>Check the font selections in screen preferences... >>> >>> >>> >>> >>> >>>>-Original Message- >>>>From: [EMAIL PROTECTED] >>>>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello >>>>Sent: January 15, 2004 17:06 >>>>To: DX4WIN >>>>Subject: [Dx4win] PSK31 Menu Problem >>>> >>>> >>>>I have a very mysterious problem when I try to adjust the TX >>>>(transmit >>>>parameters) settings in the PSK31 window. First of all, the >>>>tabs across >>>>the top of the Settings window is blank; there are no names >>>>on the tabs. >>>>However, except for the TX tab, they all do respond properly >>>>with the >>>>expected options.when they are selected. In the case of >>>> >>>> >>the TX tab, >> >> >>>>some options seem to be absent. The "TX frequency, "" Net" and "CW >>>>control" options are visible, but there is no "TX keying" option as >>>>described in the manual. As a consequence, I'm unable to >>>>select a COM >>>>port for my interface. I've reread the manual and the Help files >>>>several times without success. Does anyone have any insight here? >>>> >>>>Thanks and 73 de Joe >>>> >>>>___ >>>>Dx4win mailing list >>>>Dx4win@mailman.qth.net >>>> >>>> >>http://mailman.qth.net/mailman/listinfo/dx4win >> >> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >>--- StripMime Report -- processed MIME parts --- multipart/alternative >> text/plain (text body -- kept) >> text/html >>The reason this message is shown is because the post was in >>HTML or had an attachment. Attachments are not allowed. To >>learn how to post in Plain-Text go to: >>http://www.expita.com/nomime.html --- >>___ >>Dx4win mailing list >>Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win > > > > --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] PSK31 Menu Problem
No it's changed... The options under TX are checkboxes for Net and Use CW Control 6.02 doesn't allow a separate COM port for PSK31 PTT control... It uses the CW PTT. This suits me just fine, but apparently it creates problems for others... > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello > Sent: January 16, 2004 14:44 > To: Mel > Cc: DX4WIN > Subject: Re: [Dx4win] PSK31 Menu Problem > > > Mel, thanks for your help, and you were partially correct. > By reducing > the font size from 9 to 6, I was able to have the tab headings show > their proper labels. However, I still don't get the options that the > manual says I should. The manual says than under "TX" I should get a > the options for "NET" and "TX Keying". "TX Keying" then should have > check boxes in a submenu for "VOX," "CW Interface" and > "Serial Ports 1 > thru 8". I get no "TX Keying" option at all! I get instead a check > box for "Use CW Control". Something is haywire here, because I can't > select the COM port for my interface. > > I should add that I am using version 6.02 and my manual is > for 6.0. I > am not aware of any updates for the manual. > > Thanks again. > > 73, Joe > > Mel wrote: > > >Check the font selections in screen preferences... > > > > > > > >>-Original Message- > >>From: [EMAIL PROTECTED] > >>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello > >>Sent: January 15, 2004 17:06 > >>To: DX4WIN > >>Subject: [Dx4win] PSK31 Menu Problem > >> > >> > >>I have a very mysterious problem when I try to adjust the TX > >>(transmit > >>parameters) settings in the PSK31 window. First of all, the > >>tabs across > >>the top of the Settings window is blank; there are no names > >>on the tabs. > >>However, except for the TX tab, they all do respond properly > >>with the > >>expected options.when they are selected. In the case of > the TX tab, > >>some options seem to be absent. The "TX frequency, "" Net" and "CW > >>control" options are visible, but there is no "TX keying" option as > >>described in the manual. As a consequence, I'm unable to > >>select a COM > >>port for my interface. I've reread the manual and the Help files > >>several times without success. Does anyone have any insight here? > >> > >>Thanks and 73 de Joe > >> > >>___ > >>Dx4win mailing list > >>Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > >> > >> > >> > > > > > > > > > > > > > --- StripMime Report -- processed MIME parts --- multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in > HTML or had an attachment. Attachments are not allowed. To > learn how to post in Plain-Text go to: > http://www.expita.com/nomime.html --- > ___ > Dx4win mailing list > Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win >
[Dx4win] PSK31 Menu Problem
Mel, thanks for your help, and you were partially correct. By reducing the font size from 9 to 6, I was able to have the tab headings show their proper labels. However, I still don't get the options that the manual says I should. The manual says than under "TX" I should get a the options for "NET" and "TX Keying". "TX Keying" then should have check boxes in a submenu for "VOX," "CW Interface" and "Serial Ports 1 thru 8". I get no "TX Keying" option at all! I get instead a check box for "Use CW Control". Something is haywire here, because I can't select the COM port for my interface. I should add that I am using version 6.02 and my manual is for 6.0. I am not aware of any updates for the manual. Thanks again. 73, Joe Mel wrote: >Check the font selections in screen preferences... > > > >>-Original Message- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello >>Sent: January 15, 2004 17:06 >>To: DX4WIN >>Subject: [Dx4win] PSK31 Menu Problem >> >> >>I have a very mysterious problem when I try to adjust the TX >>(transmit >>parameters) settings in the PSK31 window. First of all, the >>tabs across >>the top of the Settings window is blank; there are no names >>on the tabs. >>However, except for the TX tab, they all do respond properly >>with the >>expected options.when they are selected. In the case of the TX tab, >>some options seem to be absent. The "TX frequency, "" Net" and "CW >>control" options are visible, but there is no "TX keying" option as >>described in the manual. As a consequence, I'm unable to >>select a COM >>port for my interface. I've reread the manual and the Help files >>several times without success. Does anyone have any insight here? >> >>Thanks and 73 de Joe >> >>___ >>Dx4win mailing list >>Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> > > > > > --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] PSK31 Menu Problem
I have a very mysterious problem when I try to adjust the TX (transmit parameters) settings in the PSK31 window. First of all, the tabs across the top of the Settings window is blank; there are no names on the tabs. However, except for the TX tab, they all do respond properly with the expected options.when they are selected. In the case of the TX tab, some options seem to be absent. The "TX frequency, "" Net" and "CW control" options are visible, but there is no "TX keying" option as described in the manual. As a consequence, I'm unable to select a COM port for my interface. I've reread the manual and the Help files several times without success. Does anyone have any insight here? Thanks and 73 de Joe
[Dx4win] PSK31 support for LPT keying
Dear Larry, I had a similar problem with lack of serial ports, I brought a USB adaptor for about $100, which gave me 4 additional serial ports. The adaptor came from the states and if that solution appeals to you I'll send you manufacturers tel number. I am at work now and the info is at home. I am sure you have considered this solution, however, it=92s a shame it does not work for you as it did in DX4WIN earlier version. Kind Regards =A0 =A0 Tony Lord G8DQZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier (K8UT) Sent: 26 October 2003 11:26 To: dx4win@mailman.qth.net Subject: [Dx4win] PSK31 support for LPT keying Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This works fine for CW, but when operating in PSK31 mode, the LPT keyed line does not seem to operate. I have gone into the PSK Tx preference window and checked the "use CW control" - but the LPT CW line does not work from PSK. (the frustrating fact is that PSK keying _does_ work under exactly the same settings from the COM port - but my com ports are dedicated to other functions). Am I doing something wrong here ? -larry K8UT ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 support for LPT keying
Thanks, everyone, for your suggestions. My comments below... Martin -- I have a rig that allows PTT and CW control on the same line, but that does not help me if the software doesn't key the line under PSK. I attempted your suggestion regarding setting the PTT delay for 500, but 6.02 allows no number higher than 255. Are you running a different version of the software or a different PSK DLL??? Roger -- Thanks for the validation -- I was certain that I used to be able to switch modes from SSB to CW to RTTY to PSK without any reconfiguration - but that must have been under version 5.x (I haven't run PSK in quite a while). Looks like I have to wait until a maintenance release is issued... -larry K8UT - Original Message - From: "Roger Borowski" <[EMAIL PROTECTED]> To: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]>; Sent: Sunday, October 26, 2003 9:43 AM Subject: Re: [Dx4win] PSK31 support for LPT keying > Larry, In Ver 6.0x, you have to geo into "Preferences" and "Control" and > switch the configuration from CW to PSK31 PTT and back and forth depending > on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying port > was selectable in the PSK31 window. Now its a real pain to switch between > these modes as it requires you to go into Preferences and control each time > you change modes. I've alerted Paul numerous times about this and hopefully > it will be addressed in the next maintenance release. > 73, -=Rog-K9RB=- > > - Original Message - > From: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]> > To: > Sent: Sunday, October 26, 2003 6:25 AM > Subject: [Dx4win] PSK31 support for LPT keying > > > > Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This > > works fine for CW, but when operating in PSK31 mode, the LPT keyed line > does > > not seem to operate. I have gone into the PSK Tx preference window and > > checked the "use CW control" - but the LPT CW line does not work from PSK. > > (the frustrating fact is that PSK keying _does_ work under exactly the > same > > settings from the COM port - but my com ports are dedicated to other > > functions). > > > > Am I doing something wrong here ? > > > > -larry > > K8UT > > > > ___ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > >
[Dx4win] PSK31 support for LPT keying
Hello Roger Had the same problem here,they both have to be on the same port but it is possible to use only cw on DTR or RTS and cw control enabled in the psk window with 500ms PTT delay to key the transceeiver. All you need is a connector on your transceiver that allows CW and PTT on the same pin. This works fine on my FT-897 DATA connector. 73 de Martin ON6MX window- Original Message - From: "Roger Borowski" <[EMAIL PROTECTED]> To: "Martin De Craemer" <[EMAIL PROTECTED]>; Sent: Sunday, October 26, 2003 9:13 PM Subject: Re: [Dx4win] PSK31 support for LPT keying > Doesn't work when CW is on the rig control port and PSK31 uses a different > port. May work with LPT poet but not with different serial ports... > -=Rog-K9RB=- > > - Original Message - > From: "Martin De Craemer" <[EMAIL PROTECTED]> > To: > Sent: Sunday, October 26, 2003 12:41 PM > Subject: Re: [Dx4win] PSK31 support for LPT keying > > > > Hi Larry > > > > All you have to do is set the PTT delay to 500ms > > and you can use both functions with CW control enabled > > in the PSK window > > > > 73 Martin > > > > ON6MX > > > > - Original Message - > > From: "Roger Borowski" <[EMAIL PROTECTED]> > > To: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]>; > > Sent: Sunday, October 26, 2003 3:43 PM > > Subject: Re: [Dx4win] PSK31 support for LPT keying > > > > > > > Larry, In Ver 6.0x, you have to geo into "Preferences" and "Control" and > > > switch the configuration from CW to PSK31 PTT and back and forth > depending > > > on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying > > port > > > was selectable in the PSK31 window. Now its a real pain to switch > between > > > these modes as it requires you to go into Preferences and control each > > time > > > you change modes. I've alerted Paul numerous times about this and > > hopefully > > > it will be addressed in the next maintenance release. > > > 73, -=Rog-K9RB=- > > > > > > - Original Message - > > > From: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]> > > > To: > > > Sent: Sunday, October 26, 2003 6:25 AM > > > Subject: [Dx4win] PSK31 support for LPT keying > > > > > > > > > > Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. > This > > > > works fine for CW, but when operating in PSK31 mode, the LPT keyed > line > > > does > > > > not seem to operate. I have gone into the PSK Tx preference window and > > > > checked the "use CW control" - but the LPT CW line does not work from > > PSK. > > > > (the frustrating fact is that PSK keying _does_ work under exactly the > > > same > > > > settings from the COM port - but my com ports are dedicated to other > > > > functions). > > > > > > > > Am I doing something wrong here ? > > > > > > > > -larry > > > > K8UT > > > > > > > > ___ > > > > Dx4win mailing list > > > > Dx4win@mailman.qth.net > > > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > > > ___ > > > Dx4win mailing list > > > Dx4win@mailman.qth.net > > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > > > > > ___ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > >
[Dx4win] PSK31 support for LPT keying
Hi Larry All you have to do is set the PTT delay to 500ms and you can use both functions with CW control enabled in the PSK window 73 Martin ON6MX - Original Message - From: "Roger Borowski" <[EMAIL PROTECTED]> To: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]>; Sent: Sunday, October 26, 2003 3:43 PM Subject: Re: [Dx4win] PSK31 support for LPT keying > Larry, In Ver 6.0x, you have to geo into "Preferences" and "Control" and > switch the configuration from CW to PSK31 PTT and back and forth depending > on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying port > was selectable in the PSK31 window. Now its a real pain to switch between > these modes as it requires you to go into Preferences and control each time > you change modes. I've alerted Paul numerous times about this and hopefully > it will be addressed in the next maintenance release. > 73, -=Rog-K9RB=- > > - Original Message - > From: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]> > To: > Sent: Sunday, October 26, 2003 6:25 AM > Subject: [Dx4win] PSK31 support for LPT keying > > > > Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This > > works fine for CW, but when operating in PSK31 mode, the LPT keyed line > does > > not seem to operate. I have gone into the PSK Tx preference window and > > checked the "use CW control" - but the LPT CW line does not work from PSK. > > (the frustrating fact is that PSK keying _does_ work under exactly the > same > > settings from the COM port - but my com ports are dedicated to other > > functions). > > > > Am I doing something wrong here ? > > > > -larry > > K8UT > > > > ___ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > >
[Dx4win] PSK31 support for LPT keying
Kenwood does not provide for PTT via serial commands, thus I'm using a RigBlaster, which requires a separate COM port for PTT to key the mic connector PTT. That all worked just fine in Ver. 5.02/03, but no longer easily possible in Ver. 6.01/02. BTW, buttons for Short Path/Long Path rotator control would also be a nice improvement rather than the pull down menu or keyboard commands. Most other logging software has done this and it really works slick allowing turning the antenna with a single mouse click. Just another "wish" that would only add flexibility to this function. Maybe they could be added to the main taskbar or another window that could be positioned over the right side of the DX4WIN main taskbar 73, Rog-K9RB - Original Message - From: "Martin De Craemer" <[EMAIL PROTECTED]> To: Sent: Sunday, October 26, 2003 3:55 PM Subject: Re: [Dx4win] PSK31 support for LPT keying > Hello Roger > > Had the same problem here,they both have to be on the same port but it is > possible to use only cw on DTR or RTS > and cw control enabled in the psk window with 500ms PTT delay to key the > transceeiver. > All you need is a connector on your transceiver that allows CW and PTT on > the same pin. > This works fine on my FT-897 DATA connector. > 73 de Martin > ON6MX > > > window- Original Message - > From: "Roger Borowski" <[EMAIL PROTECTED]> > To: "Martin De Craemer" <[EMAIL PROTECTED]>; > Sent: Sunday, October 26, 2003 9:13 PM > Subject: Re: [Dx4win] PSK31 support for LPT keying > > > > Doesn't work when CW is on the rig control port and PSK31 uses a different > > port. May work with LPT poet but not with different serial ports... > > -=Rog-K9RB=- > > > > - Original Message - > > From: "Martin De Craemer" <[EMAIL PROTECTED]> > > To: > > Sent: Sunday, October 26, 2003 12:41 PM > > Subject: Re: [Dx4win] PSK31 support for LPT keying > > > > > > > Hi Larry > > > > > > All you have to do is set the PTT delay to 500ms > > > and you can use both functions with CW control enabled > > > in the PSK window > > > > > > 73 Martin > > > > > > ON6MX > > > > > > - Original Message - > > > From: "Roger Borowski" <[EMAIL PROTECTED]> > > > To: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]>; > > > > Sent: Sunday, October 26, 2003 3:43 PM > > > Subject: Re: [Dx4win] PSK31 support for LPT keying > > > > > > > > > > Larry, In Ver 6.0x, you have to geo into "Preferences" and "Control" > and > > > > switch the configuration from CW to PSK31 PTT and back and forth > > depending > > > > on the mode you are using at the moment. In Ver. 5.02/03 the PTT > keying > > > port > > > > was selectable in the PSK31 window. Now its a real pain to switch > > between > > > > these modes as it requires you to go into Preferences and control each > > > time > > > > you change modes. I've alerted Paul numerous times about this and > > > hopefully > > > > it will be addressed in the next maintenance release. > > > > 73, -=Rog-K9RB=- > > > > > > > > - Original Message - > > > > From: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]> > > > > To: > > > > Sent: Sunday, October 26, 2003 6:25 AM > > > > Subject: [Dx4win] PSK31 support for LPT keying > > > > > > > > > > > > > Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. > > This > > > > > works fine for CW, but when operating in PSK31 mode, the LPT keyed > > line > > > > does > > > > > not seem to operate. I have gone into the PSK Tx preference window > and > > > > > checked the "use CW control" - but the LPT CW line does not work > from > > > PSK. > > > > > (the frustrating fact is that PSK keying _does_ work under exactly > the > > > > same > > > > > settings from the COM port - but my com ports are dedicated to other > > > > > functions). > > > > > > > > > > Am I doing something wrong here ? > > > > > > > > > > -larry > > > > > K8UT > > > > > > > > > > ___ > > > > > Dx4win mailing list > > > > > Dx4win@mailman.qth.net > > > > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > > > > > > ___ > > > > Dx4win mailing list > > > > Dx4win@mailman.qth.net > > > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > > > > > > > > > > ___ > > > Dx4win mailing list > > > Dx4win@mailman.qth.net > > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > > > > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 support for LPT keying
Doesn't work when CW is on the rig control port and PSK31 uses a different port. May work with LPT poet but not with different serial ports... -=Rog-K9RB=- - Original Message - From: "Martin De Craemer" <[EMAIL PROTECTED]> To: Sent: Sunday, October 26, 2003 12:41 PM Subject: Re: [Dx4win] PSK31 support for LPT keying > Hi Larry > > All you have to do is set the PTT delay to 500ms > and you can use both functions with CW control enabled > in the PSK window > > 73 Martin > > ON6MX > > - Original Message - > From: "Roger Borowski" <[EMAIL PROTECTED]> > To: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]>; > Sent: Sunday, October 26, 2003 3:43 PM > Subject: Re: [Dx4win] PSK31 support for LPT keying > > > > Larry, In Ver 6.0x, you have to geo into "Preferences" and "Control" and > > switch the configuration from CW to PSK31 PTT and back and forth depending > > on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying > port > > was selectable in the PSK31 window. Now its a real pain to switch between > > these modes as it requires you to go into Preferences and control each > time > > you change modes. I've alerted Paul numerous times about this and > hopefully > > it will be addressed in the next maintenance release. > > 73, -=Rog-K9RB=- > > > > - Original Message - > > From: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]> > > To: > > Sent: Sunday, October 26, 2003 6:25 AM > > Subject: [Dx4win] PSK31 support for LPT keying > > > > > > > Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This > > > works fine for CW, but when operating in PSK31 mode, the LPT keyed line > > does > > > not seem to operate. I have gone into the PSK Tx preference window and > > > checked the "use CW control" - but the LPT CW line does not work from > PSK. > > > (the frustrating fact is that PSK keying _does_ work under exactly the > > same > > > settings from the COM port - but my com ports are dedicated to other > > > functions). > > > > > > Am I doing something wrong here ? > > > > > > -larry > > > K8UT > > > > > > ___ > > > Dx4win mailing list > > > Dx4win@mailman.qth.net > > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > ___ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
[Dx4win] PSK31 support for LPT keying
Larry, In Ver 6.0x, you have to geo into "Preferences" and "Control" and switch the configuration from CW to PSK31 PTT and back and forth depending on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying port was selectable in the PSK31 window. Now its a real pain to switch between these modes as it requires you to go into Preferences and control each time you change modes. I've alerted Paul numerous times about this and hopefully it will be addressed in the next maintenance release. 73, -=Rog-K9RB=- - Original Message - From: "Larry Gauthier (K8UT)" <[EMAIL PROTECTED]> To: Sent: Sunday, October 26, 2003 6:25 AM Subject: [Dx4win] PSK31 support for LPT keying > Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This > works fine for CW, but when operating in PSK31 mode, the LPT keyed line does > not seem to operate. I have gone into the PSK Tx preference window and > checked the "use CW control" - but the LPT CW line does not work from PSK. > (the frustrating fact is that PSK keying _does_ work under exactly the same > settings from the COM port - but my com ports are dedicated to other > functions). > > Am I doing something wrong here ? > > -larry > K8UT > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
[Dx4win] PSK31 support for LPT keying
Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This works fine for CW, but when operating in PSK31 mode, the LPT keyed line does not seem to operate. I have gone into the PSK Tx preference window and checked the "use CW control" - but the LPT CW line does not work from PSK. (the frustrating fact is that PSK keying _does_ work under exactly the same settings from the COM port - but my com ports are dedicated to other functions). Am I doing something wrong here ? -larry K8UT
[Dx4win] PSK31 Problem
The callsign field does not populate when I click on a call in the = receive window on PSK31. This has been happening since I dowloaded the = demo version of 601.=20 I have removed all files I can find related to DX4WIN and installed 602. = All works fine, except this function in PSK mode. What does happen - = when I click on a call sign in the receive window, the first letter in = the call appears in the Notes for this QSO field. Any suggestions on a fix would be welcome. 73, Dave Dave Earnest, K7JJ [EMAIL PROTECTED] --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] PSK31 & RTTY Setup
I was wondering how to set up PSK31 and RTTY in DX4WIN. I can rcv fine on PSK31 but cannot tx. With WinPSKse it works fine, but in DX4WIN it will not tx. I use a Rig Blaster on COM3 and my FT1000MP Mark-V is on COM2. Any help with PSK31 and RTTY would be appreciated. 73's Alan, N5PA
[Dx4win] PSK31 config change in DX4WIN 6.02? A solution!
Thanks for the "fix"... it may be useful to others... And I'm sure it would be appreciated if Paul can restore the previous flexibility for those who need to find a "compatible" solution with other harware/software. - Original Message - From: "Larry Gauthier" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; Sent: Monday, March 17, 2003 09:40 Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? A solution! > Mel (et al), > > Mel is absolutely correct - DX4WIN v6.02 keys pins 1 and 16 of the LPT port, > and similarly keys RTS and DTS on a com port. There is no bug; the program > behaves as described in the documentation.
[Dx4win] PSK31 config change in DX4WIN 6.02? A solution!
Mel (et al),
Mel is absolutely correct - DX4WIN v6.02 keys pins 1 and 16 of the LPT port,
and similarly keys RTS and DTS on a com port. There is no bug; the program
behaves as described in the documentation. Since I am the guy who started
this multiple-email discussion {and claimed there was a bug -- my apologies
to those who really don't care about this topic}, I feel compelled to post
my solution.
The problem for many of us is that version 5.03 included a com port
configuration feature allowing independent selection of ports for CW and PSK
keying. Many of us took advantage of that feature when designing the
complicated and delicate sets of interfaces between our radios, RibBlasters,
CI-V converters, antenna switch boxes, rotor controls, and computers.
Version 6.02 combined the CW and FSK keying into one configuration setting,
eliminated the independence feature, and thus our interfaces stopped
working.
I have studied the behavior differences between 5.03 and 6.02, and concluded
that the simplest (and cheapest) solution for me is to add a single 2 cent
diode to my serial card, and "diode sum" the DTS signals between com1 and
com2. This will allow me to use com1 for CW and FSK; and use com2 for my
RigBlaster - which controls MMTTY and other AFSK type software. The diode
will connect the DTR signal from PSK keying on com1 to the DTR line on
com2 - so the RigBlaster, which "thinks" it is sitting on com2, will be
keyed by the PSK key line on com1.
Thanks, Mel, for insisting that things were working properly, and forcing me
to look more deeply into my problem.
-larry
K8UT
- Original Message -
From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]>
To: "'Larry Gauthier'" <[EMAIL PROTECTED]>
Cc: "'DX4Win Reflector'" <>
Sent: Sunday, March 16, 2003 8:14 PM
Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02?
> Yes it does... I'm doing it here... Hooked it up to LPT1 pin 1 and 16
> just to try it out... Usually use a COM port...
>
> Who says there is a bug?
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Larry Gauthier
> Sent: March 16, 2003 4:16 PM
> To: [EMAIL PROTECTED]
> Cc: 'DX4Win Reflector'
> Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02?
>
>
> Mel,
>
> Thanks for the note - and I agree that, theoretically, you should be
> able to key the rig from the same port that you use for CW (at least
> that's what the config menu says ;-). I am only using 1 rig here, so my
> "work-around #1" _should_ work.
>
> However, in DX4WIN 6.02, the software has a bug. If you configure to key
> the rig in CW from a COM port, PSK is also keyed from the same COM port.
> If you configure to key the rig in CW from the LPT port, PSK keying via
> the same LPT port does not work.
>
> -larry
> K8UT
>
> - Original Message -
> From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]>
> To: "'Larry Gauthier'" <[EMAIL PROTECTED]>
> Cc: "'DX4Win Reflector'"
> Sent: Sunday, March 16, 2003 3:24 PM
> Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02?
>
>
> > Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW
> > PTT... I would think this would only be a problem if you are using a
> > different radio for PSK31... So work-around 1 should work... Obviously
>
> > workaround 2 won't unless you define a 2nd COM PTT interface for mmty
> > and hook them up in parallel...
> >
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]
> > On Behalf Of Larry Gauthier
> > Sent: March 16, 2003 1:41 PM
> > To: dx4win@mailman.qth.net
> > Subject: [Dx4win] PSK31 config change in DX4WIN 6.02?
> >
> >
> > In DX4WIN 5.x, the PSK screen allowed you to select the
>
> > PSK keying com port from 1-8, and either RTS or DTR as the keyed
> > line. The 5.x PSK selection was completely independent of the keyed
> > line for CW. In DX4WIN 6.02, it seems that your only choices for PSK
> > keying are either the CW interface or VOX. What happened to the
> > ability to independently choose a com port?
> >
> > In my 5.03 configuration, I had been using the LPT port for CW keying,
>
> > and the com port for keying in either PSK31 or MMTTY. As long as I did
>
> > not attempt to simultaneously open the PSK window and run MMTTY, this
> > arrangement worked fine.
> >
> > Under 6.02, I attempted to work-arounds... neither which seem to work:
>
> > First work-around: telling DX4WIN to use the LPT CW interface for PSK
> > keying. It doesn't work. PSK does not key via
[Dx4win] PSK31 config change in DX4WIN 6.02?
Rod, I agree. I have the same problem - no able be QRV PSK31 with 6.02 using previous 5.03 settings. 73 Milan, OK1FM Milan GÜTTER http://www.ok1fm.com E-mail: [EMAIL PROTECTED] From: "WC7N" <[EMAIL PROTECTED]> To: "Larry Gauthier" <[EMAIL PROTECTED]>, Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? Date: Sun, 16 Mar 2003 11:02:28 -0800 Yep I found the same problem and had the same experience as you did. My work around was to stop using DX4WIN for PSK-31. Rod WC7N
[Dx4win] PSK31 config change in DX4WIN 6.02?
I don't use LPT port as early on I found that CW doesn't work as well as with COM port. I use COM 3 for rig control and also CW keying, COM 5 is dedicated for PTT w/PSK31 RigBlaster is commonplace with PSK31 and requires use of a separate COM port for PTT Rig control and CW keying work well on the same COM port, can't use LPT port for Rig control. Also, I don't care to re-engineer what use to work well and still works well with Writelog and other programs. That would create more problems when using other software. As I said before, It wasn't broke before and now it is. Ver 5.02/03 did this all fine by allowing a separate port selection. If you don't use a RigBlaster, or separate COM ports for CW and PTT for PSK31 that's what you are missing! If what you are doing works for you, thats great. Many others want it as it was before V.6 - Original Message - From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]> To: "'Roger Borowski'" <[EMAIL PROTECTED]>; "'Larry Gauthier'" <[EMAIL PROTECTED]> Cc: "'DX4Win Reflector'" Sent: Sunday, March 16, 2003 8:13 PM Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? > You haven't got it hooked up correctly... > > On the LPT port... > Pin 1 keys CW > Pin 16 keys PTT > > It sounds like you are using pin 1 for PTT > > I don't know anything about Rigblasters... > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Roger Borowski > Sent: March 16, 2003 4:07 PM > To: [EMAIL PROTECTED]; 'Larry Gauthier' > Cc: 'DX4Win Reflector' > Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? > > > That doesn't work either, Mel. The PTT relay in the RigBlaster then keys > with every dit and dah or the radio PTT keys with every dit and dah in > the CW mode. It would likely work if you were to disconnect and > re-connect the PTT line for PSK31 but why not just allow the individual > software control for individual selection of ports for CW and PSK31 PTT > as it was in Ver 5.02/03 That wasn't broke and didn't need fixing! Now > its broke! -=Rog-K9RB=- > > - Original Message - > From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]> > To: "'Larry Gauthier'" <[EMAIL PROTECTED]> > Cc: "'DX4Win Reflector'" > Sent: Sunday, March 16, 2003 3:24 PM > Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? > > > > Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW > > PTT... I would think this would only be a problem if you are using a > > different radio for PSK31... So work-around 1 should work... Obviously > > > workaround 2 won't unless you define a 2nd COM PTT interface for mmty > > and hook them up in parallel... > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] > > On Behalf Of Larry Gauthier > > Sent: March 16, 2003 1:41 PM > > To: dx4win@mailman.qth.net > > Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? > > > > > > In DX4WIN 5.x, the PSK screen allowed you to select the > > > PSK keying com port from 1-8, and either RTS or DTR as the keyed > > line. The 5.x PSK selection was completely independent of the keyed > > line for CW. In DX4WIN 6.02, it seems that your only choices for PSK > > keying are either the CW interface or VOX. What happened to the > > ability to independently choose a com port? > > > > In my 5.03 configuration, I had been using the LPT port for CW keying, > > > and the com port for keying in either PSK31 or MMTTY. As long as I did > > > not attempt to simultaneously open the PSK window and run MMTTY, this > > arrangement worked fine. > > > > Under 6.02, I attempted to work-arounds... neither which seem to work: > > > First work-around: telling DX4WIN to use the LPT CW interface for PSK > > keying. It doesn't work. PSK does not key via the LPT port... although > > > CW still works fine. > > > > Second work-around: Re-configure for CW keying via the com port. This > > allows CW and PSK to work properly, but prevents MMTTY from running. > > (DX4WIN grabs control of the CW port upon launch, and if you try to > > subsequently launch MMTTY you get a port conflict error.) > > > > > > Has anyone else encountered these problems? Does anyone have a > > suggestion on how to solve them? > > > > -larry > > K8UT > > > > --- StripMime Report -- processed MIME parts --- multipart/alternative > > text/plain (text body -- kep
[Dx4win] PSK31 config change in DX4WIN 6.02?
Yes it does... I'm doing it here... Hooked it up to LPT1 pin 1 and 16 just to try it out... Usually use a COM port... Who says there is a bug? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier Sent: March 16, 2003 4:16 PM To: [EMAIL PROTECTED] Cc: 'DX4Win Reflector' Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? Mel, Thanks for the note - and I agree that, theoretically, you should be able to key the rig from the same port that you use for CW (at least that's what the config menu says ;-). I am only using 1 rig here, so my "work-around #1" _should_ work. However, in DX4WIN 6.02, the software has a bug. If you configure to key the rig in CW from a COM port, PSK is also keyed from the same COM port. If you configure to key the rig in CW from the LPT port, PSK keying via the same LPT port does not work. -larry K8UT - Original Message - From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]> To: "'Larry Gauthier'" <[EMAIL PROTECTED]> Cc: "'DX4Win Reflector'" Sent: Sunday, March 16, 2003 3:24 PM Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? > Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW > PTT... I would think this would only be a problem if you are using a > different radio for PSK31... So work-around 1 should work... Obviously > workaround 2 won't unless you define a 2nd COM PTT interface for mmty > and hook them up in parallel... > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Larry Gauthier > Sent: March 16, 2003 1:41 PM > To: dx4win@mailman.qth.net > Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? > > > In DX4WIN 5.x, the PSK screen allowed you to select the > PSK keying com port from 1-8, and either RTS or DTR as the keyed > line. The 5.x PSK selection was completely independent of the keyed > line for CW. In DX4WIN 6.02, it seems that your only choices for PSK > keying are either the CW interface or VOX. What happened to the > ability to independently choose a com port? > > In my 5.03 configuration, I had been using the LPT port for CW keying, > and the com port for keying in either PSK31 or MMTTY. As long as I did > not attempt to simultaneously open the PSK window and run MMTTY, this > arrangement worked fine. > > Under 6.02, I attempted to work-arounds... neither which seem to work: > First work-around: telling DX4WIN to use the LPT CW interface for PSK > keying. It doesn't work. PSK does not key via the LPT port... although > CW still works fine. > > Second work-around: Re-configure for CW keying via the com port. This > allows CW and PSK to work properly, but prevents MMTTY from running. > (DX4WIN grabs control of the CW port upon launch, and if you try to > subsequently launch MMTTY you get a port conflict error.) > > > Has anyone else encountered these problems? Does anyone have a > suggestion on how to solve them? > > -larry > K8UT > > --- StripMime Report -- processed MIME parts --- multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML or > had an attachment. Attachments are not allowed. To learn how to post > in Plain-Text go to: http://www.expita.com/nomime.html --- > ___ > Dx4win mailing list > Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win > ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 config change in DX4WIN 6.02?
You haven't got it hooked up correctly... On the LPT port... Pin 1 keys CW Pin 16 keys PTT It sounds like you are using pin 1 for PTT I don't know anything about Rigblasters... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Borowski Sent: March 16, 2003 4:07 PM To: [EMAIL PROTECTED]; 'Larry Gauthier' Cc: 'DX4Win Reflector' Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? That doesn't work either, Mel. The PTT relay in the RigBlaster then keys with every dit and dah or the radio PTT keys with every dit and dah in the CW mode. It would likely work if you were to disconnect and re-connect the PTT line for PSK31 but why not just allow the individual software control for individual selection of ports for CW and PSK31 PTT as it was in Ver 5.02/03 That wasn't broke and didn't need fixing! Now its broke! -=Rog-K9RB=- - Original Message - From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]> To: "'Larry Gauthier'" <[EMAIL PROTECTED]> Cc: "'DX4Win Reflector'" Sent: Sunday, March 16, 2003 3:24 PM Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? > Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW > PTT... I would think this would only be a problem if you are using a > different radio for PSK31... So work-around 1 should work... Obviously > workaround 2 won't unless you define a 2nd COM PTT interface for mmty > and hook them up in parallel... > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Larry Gauthier > Sent: March 16, 2003 1:41 PM > To: dx4win@mailman.qth.net > Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? > > > In DX4WIN 5.x, the PSK screen allowed you to select the > PSK keying com port from 1-8, and either RTS or DTR as the keyed > line. The 5.x PSK selection was completely independent of the keyed > line for CW. In DX4WIN 6.02, it seems that your only choices for PSK > keying are either the CW interface or VOX. What happened to the > ability to independently choose a com port? > > In my 5.03 configuration, I had been using the LPT port for CW keying, > and the com port for keying in either PSK31 or MMTTY. As long as I did > not attempt to simultaneously open the PSK window and run MMTTY, this > arrangement worked fine. > > Under 6.02, I attempted to work-arounds... neither which seem to work: > First work-around: telling DX4WIN to use the LPT CW interface for PSK > keying. It doesn't work. PSK does not key via the LPT port... although > CW still works fine. > > Second work-around: Re-configure for CW keying via the com port. This > allows CW and PSK to work properly, but prevents MMTTY from running. > (DX4WIN grabs control of the CW port upon launch, and if you try to > subsequently launch MMTTY you get a port conflict error.) > > > Has anyone else encountered these problems? Does anyone have a > suggestion on how to solve them? > > -larry > K8UT > > --- StripMime Report -- processed MIME parts --- multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML or > had an attachment. Attachments are not allowed. To learn how to post > in Plain-Text go to: http://www.expita.com/nomime.html --- > ___ > Dx4win mailing list > Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 config change in DX4WIN 6.02?
Mel, Thanks for the note - and I agree that, theoretically, you should be able to key the rig from the same port that you use for CW (at least that's what the config menu says ;-). I am only using 1 rig here, so my "work-around #1" _should_ work. However, in DX4WIN 6.02, the software has a bug. If you configure to key the rig in CW from a COM port, PSK is also keyed from the same COM port. If you configure to key the rig in CW from the LPT port, PSK keying via the same LPT port does not work. -larry K8UT - Original Message - From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]> To: "'Larry Gauthier'" <[EMAIL PROTECTED]> Cc: "'DX4Win Reflector'" Sent: Sunday, March 16, 2003 3:24 PM Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? > Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW PTT... > I would think this would only be a problem if you are using a different > radio for PSK31... So work-around 1 should work... Obviously workaround > 2 won't unless you define a 2nd COM PTT interface for mmty and hook them > up in parallel... > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Larry Gauthier > Sent: March 16, 2003 1:41 PM > To: dx4win@mailman.qth.net > Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? > > > In DX4WIN 5.x, the PSK screen allowed you to select the > PSK keying com port from 1-8, and either RTS or DTR as the keyed line. > The 5.x PSK selection was completely independent of the keyed line for > CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are > either the CW interface or VOX. What happened to the ability to > independently choose a com port? > > In my 5.03 configuration, I had been using the LPT port for CW keying, > and the com port for keying in either PSK31 or MMTTY. As long as I did > not attempt to simultaneously open the PSK window and run MMTTY, this > arrangement worked fine. > > Under 6.02, I attempted to work-arounds... neither which seem to work: > First work-around: telling DX4WIN to use the LPT CW interface for PSK > keying. It doesn't work. PSK does not key via the LPT port... although > CW still works fine. > > Second work-around: Re-configure for CW keying via the com port. This > allows CW and PSK to work properly, but prevents MMTTY from running. > (DX4WIN grabs control of the CW port upon launch, and if you try to > subsequently launch MMTTY you get a port conflict error.) > > > Has anyone else encountered these problems? Does anyone have a > suggestion on how to solve them? > > -larry > K8UT > > --- StripMime Report -- processed MIME parts --- multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML or had > an attachment. Attachments are not allowed. To learn how to post in > Plain-Text go to: http://www.expita.com/nomime.html --- > ___ > Dx4win mailing list > Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win >
[Dx4win] PSK31 config change in DX4WIN 6.02?
That doesn't work either, Mel. The PTT relay in the RigBlaster then keys with every dit and dah or the radio PTT keys with every dit and dah in the CW mode. It would likely work if you were to disconnect and re-connect the PTT line for PSK31 but why not just allow the individual software control for individual selection of ports for CW and PSK31 PTT as it was in Ver 5.02/03 That wasn't broke and didn't need fixing! Now its broke! -=Rog-K9RB=- - Original Message - From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]> To: "'Larry Gauthier'" <[EMAIL PROTECTED]> Cc: "'DX4Win Reflector'" Sent: Sunday, March 16, 2003 3:24 PM Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? > Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW PTT... > I would think this would only be a problem if you are using a different > radio for PSK31... So work-around 1 should work... Obviously workaround > 2 won't unless you define a 2nd COM PTT interface for mmty and hook them > up in parallel... > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Larry Gauthier > Sent: March 16, 2003 1:41 PM > To: dx4win@mailman.qth.net > Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? > > > In DX4WIN 5.x, the PSK screen allowed you to select the > PSK keying com port from 1-8, and either RTS or DTR as the keyed line. > The 5.x PSK selection was completely independent of the keyed line for > CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are > either the CW interface or VOX. What happened to the ability to > independently choose a com port? > > In my 5.03 configuration, I had been using the LPT port for CW keying, > and the com port for keying in either PSK31 or MMTTY. As long as I did > not attempt to simultaneously open the PSK window and run MMTTY, this > arrangement worked fine. > > Under 6.02, I attempted to work-arounds... neither which seem to work: > First work-around: telling DX4WIN to use the LPT CW interface for PSK > keying. It doesn't work. PSK does not key via the LPT port... although > CW still works fine. > > Second work-around: Re-configure for CW keying via the com port. This > allows CW and PSK to work properly, but prevents MMTTY from running. > (DX4WIN grabs control of the CW port upon launch, and if you try to > subsequently launch MMTTY you get a port conflict error.) > > > Has anyone else encountered these problems? Does anyone have a > suggestion on how to solve them? > > -larry > K8UT > > --- StripMime Report -- processed MIME parts --- multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML or had > an attachment. Attachments are not allowed. To learn how to post in > Plain-Text go to: http://www.expita.com/nomime.html --- > ___ > Dx4win mailing list > Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 config change in DX4WIN 6.02?
Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW PTT... I would think this would only be a problem if you are using a different radio for PSK31... So work-around 1 should work... Obviously workaround 2 won't unless you define a 2nd COM PTT interface for mmty and hook them up in parallel... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier Sent: March 16, 2003 1:41 PM To: dx4win@mailman.qth.net Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? In DX4WIN 5.x, the PSK screen allowed you to select the PSK keying com port from 1-8, and either RTS or DTR as the keyed line. The 5.x PSK selection was completely independent of the keyed line for CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are either the CW interface or VOX. What happened to the ability to independently choose a com port? In my 5.03 configuration, I had been using the LPT port for CW keying, and the com port for keying in either PSK31 or MMTTY. As long as I did not attempt to simultaneously open the PSK window and run MMTTY, this arrangement worked fine. Under 6.02, I attempted to work-arounds... neither which seem to work: First work-around: telling DX4WIN to use the LPT CW interface for PSK keying. It doesn't work. PSK does not key via the LPT port... although CW still works fine. Second work-around: Re-configure for CW keying via the com port. This allows CW and PSK to work properly, but prevents MMTTY from running. (DX4WIN grabs control of the CW port upon launch, and if you try to subsequently launch MMTTY you get a port conflict error.) Has anyone else encountered these problems? Does anyone have a suggestion on how to solve them? -larry K8UT --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 config change in DX4WIN 6.02?
Yes, Larry, I share this dilemma with you and any others that work CW and PSK31 modes and use different ports for control of CW keying and PSK31 PTT. I brought this problem to the attention of Paul just days after the release of Ver 6... It is a real pain now and was so simple in Ver. 5.02/5.03 and makes PSK31 changeover so difficult that I've gone back to using Ver. 5.02 here. Paul told me that he would work on the problem and I anticipate that fix in the next maintenance release, hopefully soon. Ver. 6.xx would then be a real nice enhancement for us multimode CW/PSK users. 73, -=Rog-K9RB=- - Original Message - From: "Larry Gauthier" <[EMAIL PROTECTED]> To: Sent: Sunday, March 16, 2003 1:41 PM Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? In DX4WIN 5.x, the PSK screen allowed you to select the PSK keying com port from 1-8, and either RTS or DTR as the keyed line. The 5.x PSK selection was completely independent of the keyed line for CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are either the CW interface or VOX. What happened to the ability to independently choose a com port? In my 5.03 configuration, I had been using the LPT port for CW keying, and the com port for keying in either PSK31 or MMTTY. As long as I did not attempt to simultaneously open the PSK window and run MMTTY, this arrangement worked fine. Under 6.02, I attempted to work-arounds... neither which seem to work: First work-around: telling DX4WIN to use the LPT CW interface for PSK keying. It doesn't work. PSK does not key via the LPT port... although CW still works fine. Second work-around: Re-configure for CW keying via the com port. This allows CW and PSK to work properly, but prevents MMTTY from running. (DX4WIN grabs control of the CW port upon launch, and if you try to subsequently launch MMTTY you get a port conflict error.) Has anyone else encountered these problems? Does anyone have a suggestion on how to solve them? -larry K8UT --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 config change in DX4WIN 6.02?
In DX4WIN 5.x, the PSK screen allowed you to select the = PSK keying com port from 1-8, and either RTS or DTR as the keyed line. = The 5.x PSK selection was completely independent of the keyed line for = CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are = either the CW interface or VOX. What happened to the ability to = independently choose a com port? In my 5.03 configuration, I had been using the LPT port for CW keying, = and the com port for keying in either PSK31 or MMTTY. As long as I did = not attempt to simultaneously open the PSK window and run MMTTY, this = arrangement worked fine. Under 6.02, I attempted to work-arounds... neither which seem to work: First work-around: telling DX4WIN to use the LPT CW interface for PSK = keying. It doesn't work. PSK does not key via the LPT port... although = CW still works fine. Second work-around: Re-configure for CW keying via the com port. This = allows CW and PSK to work properly, but prevents MMTTY from running. = (DX4WIN grabs control of the CW port upon launch, and if you try to = subsequently launch MMTTY you get a port conflict error.) Has anyone else encountered these problems? Does anyone have a = suggestion on how to solve them? -larry K8UT --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] PSK31 config change in DX4WIN 6.02?
Yep I found the same problem and had the same experience as you did. My work around was to stop using DX4WIN for PSK-31. Rod WC7N - Original Message - From: "Larry Gauthier" <[EMAIL PROTECTED]> To: Sent: Sunday, March 16, 2003 10:41 AM Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? In DX4WIN 5.x, the PSK screen allowed you to select the PSK keying com port from 1-8, and either RTS or DTR as the keyed line. The 5.x PSK selection was completely independent of the keyed line for CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are either the CW interface or VOX. What happened to the ability to independently choose a com port? In my 5.03 configuration, I had been using the LPT port for CW keying, and the com port for keying in either PSK31 or MMTTY. As long as I did not attempt to simultaneously open the PSK window and run MMTTY, this arrangement worked fine. Under 6.02, I attempted to work-arounds... neither which seem to work: First work-around: telling DX4WIN to use the LPT CW interface for PSK keying. It doesn't work. PSK does not key via the LPT port... although CW still works fine. Second work-around: Re-configure for CW keying via the com port. This allows CW and PSK to work properly, but prevents MMTTY from running. (DX4WIN grabs control of the CW port upon launch, and if you try to subsequently launch MMTTY you get a port conflict error.) Has anyone else encountered these problems? Does anyone have a suggestion on how to solve them? -larry K8UT --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 and SSTV scores - how?
Dear DX4WIN users, I would like to know, how get my PSK31 and my SSTV score. (The DXCC style). I'm still missing this in the Report column. The way thru Report Editor or via Custom Report seems be very impractical. Using DX4WIN 6.02. 73 Milan, OK1FM Milan GÜTTER http://www.ok1fm.com E-mail: [EMAIL PROTECTED]
[Dx4win] PSK31
Bill, I downloaded the latest version of the DLL and it seems to work fine. Reportedly, a few bugs were fixed that I never saw. I plan to include the latest DLL in the next release. Paul At 01:36 PM 1/26/03 +, Bill Henderson wrote: >Hi > >I'm new to PSK31 and I have been playing with various programmes. I had always >overlooked the built in programme because it looked a bit dated and limited. >Now that I've had a closer look I have become a fan. Replace dated and limited >with flexible. > >Is there any point in me updating PskCore.dll? > >Bill GM0VIT > >--- StripMime Report -- processed MIME parts --- >multipart/alternative > text/plain (text body -- kept) > text/html >The reason this message is shown is because the post was in HTML >or had an attachment. Attachments are not allowed. To learn how >to post in Plain-Text go to: http://www.expita.com/nomime.html --- >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] PSK31
Hi I'm new to PSK31 and I have been playing with various programmes. I had = always overlooked the built in programme because it looked a bit dated = and limited. Now that I've had a closer look I have become a fan. = Replace dated and limited with flexible. Is there any point in me updating PskCore.dll?=20 Bill GM0VIT --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] psk31 window
for some reason, the clickable features on the PSK31 window have gone ka boom a double click on a callsign puts everything after the number in the noters for the call line and not in the callsign box. I am not sure if i accidently changed some setting but it was a useful feature and I miss it :-) Any suggestions would be appreciated Merci 73, Steve - KF2TI Time flies like an arrow. Fruit flies like a banana. Khakis: What you need to start the car in Boston. If electricity comes from electrons... does that mean that morality comes from morons? outgoing mail scanned with Norton's NAV2003
[Dx4win] PSK31
Other thoughts... Make sure level is correct Tune very carefully... Those sigs are narrow... Turn on AFC Use BPSK not QPSK (not used all that much)... Good luck...
[Dx4win] PSK31 SQUELCH SETTING PROCEDURE?
Please explain the purpose of the squelch setting in the psk window, and tell me where to set the bar to achieve best copy. I have adjusted the squelch setting up and down but can see little if any difference in copying text. Whatever I'm doing must be OK because it seems to copy text pretty well regardless of squelch level setting. Thanks, Tom, NU7J _ Chat with friends online, try MSN Messenger: http://messenger.msn.com
