onboard sound does not work
Hello. I am a newbie to both unix and FreeBSD. I am trying to configure my onboard sond without success. My motherboard: ASUS P4S800-MX Audio spec: ADI AD1888 6channel audio codec. pciconf -lv says: [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 rev=0xa0 hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS7012 PCI Audio Accelerator' class= multimedia subclass = audio dmesg: pcm0: SiS 7012 port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device 2.7 on pci0 pcm0: Unknown AC97 Codec (id = 0x41445368) I tried kldload snd_driver.ko but kldstat says: Id Refs AddressSize Name 1 35 0xc040 37fd84 kernel 21 0xc078 51a18acpi.ko 31 0xc2c24000 8000 ipfw.ko 41 0xc2c62000 19000linux.ko 51 0xc3306000 2000 snd_driver.ko 61 0xc3308000 8000 snd_maestro3.ko I have device pcm in my kernel. Is there something more you need to know?? I have read man pcm, the handbook and complete freebsd but I can t figure it out. I still think that everything is a bit confusing because i am not very good at computers and i am sure that I miss something fundamental. Hope that somebody can direct me to what i am missing. Many thanks Gaf ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Dlink dwlg520 netgear WG311
Hi, I have a little problem! I have to configure my dlink dwl g520 and netgear WG311 card for Freebsd in ad hoc mode, but it doesn't. I have installed Freebsd 5.2 on two machines. On the first i have typed : ifconfig ath0 inet 192.168.1.1 netmask 0xff0 ssid my_net mode 11b mediaopt adhoc. On the second i have typed : ifconfig ath0 inet 192.168.1.2 netmask 0xff0 ssid my_net mode 11b mediaopt adhoc. When the machine try to ping each other, I see arp request message and arp reply message, but machines don't ping each other. Can you help me? Mikele. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Help to configure FreeBSD as server
I configure my home FreeBSD OS as server. I run FreeBSD under WinXP with VMWare Workstation 4. On my work, Web Programmers company, FreeSD is configured so (DNS under FreeBSD is configured for zone office.net with hosts host1 host2), that from WinXP I can ping host1 and host2 without domain name: windows xp console: ping host1 - ok ping host2 - ok ping host1.office.net - ok ping host2.office.net - ok XP PC is user of workgroup, DNS-suffix is empty. Only DNS in LAN settings is entered. That's all. I have configured my home DNS under FreeBSD with office template. I have entered DNS, but at home I can ping only full host names (with domains): windows xp console: ping host1 - no reply ping host2 - no reply ping host1.office.net - ok ping host2.office.net - ok Why? I can't understand. I try to solve this problem 5 days, but nothing helps me. When I entered DNS suffix: office.net - OK. But in my office that works without DNS-suffix. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Apache + DNS
I configured DNS (bind9) and Apache in FreeBSD 4.7 (IP: 192.168.1.1). My server name on FreeBSD - myserver.mydomain.com This server configuration: 1. /etc/resolv.conf domain mydomain.com nameserver 192.168.1.1 2. Bind config: I have domain: mydomain.com This domain hosts: server(192.168.1.1) - server and DNS-server (FreeBSD) site1(192.168.1.1) site2(192.168.1.1) xpcomp (192.168.1.10) 3. Apache config (httpd.conf): NameVirtualHost myserver.mydomain.com VirtualHost site1 ServerName site1.mydomain.com ServerAlias site1 DocumentRoot /usr/local/proj/site1/html ErrorLog /usr/local/proj/site1/_log/error_log CustomLog /usr/local/proj/site1/_log/access_log common /VirtualHost FreeBSD is a Virtual Mashine (based on VMWare Workstation 4) under WinXP. In Windows XP Lan config I wrote: DNS - 192.168.1.1. My Computer settings: Name: xpcomp Workroup: MyWorkgroup DNS suffix: mydomain.com When I in browser load my local site with url http://site1/ I want, that browser automatically to the end of base url addes domain name in bind config. Examples: http://site1/ - http://site1.mydomain.com http://site1/test/index.html - http://site1.mydomain.com/test/index.html How can I make this think? What config i need to correct: apache, bind or something another? (I can show my bind config files) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Question on cvsuping ports tree
I was reading a article at www.onlamp.com in the FreeBSD section regarding the use of the portupgrade package. As I was reading the article, it stated that everytime you cvsup your ports tree, your /usr/ports/INDEX file should reflect the update with a new time stamp, showing the last time the ports tree was updated. After updating my tree today and checking out the /usr/ports/INDEX file, it should the incorrect date. It should a date about a week old actually. SO my question is, what is going on? Is the article incorrect in what it stated? Or is there something else I need to do that I am missing? I do appreciate the help and explanation. Jason mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: new install of 5.2 ISO aft hour system freeze cold reboot onlyoption
Everything runs fine for about an hour and a half then everything freezes ( doesnt recognize keyboard, mouse, anything etc ) and i have to do a cold reboot ( ouch! ). Do you have X running or any additional cards/devices/drivers in use in the machine when this occurs? Which ethernet are you using etc. -with X running or not, the only possibly 'non-standard' thing running is the 4-way usb/multimeida kvm switch i'm using. (iogear) but other than being a half-assed cheap switch it's working correctly and doesnt' seem to have anything to do with this. I have 2 onboard nics, a 3-com and nvida built in but i'm using a SMC (Accton|SMC2-1211TX) which is working fine, also seems to be unrelated. I do believe this to be related to ACPI but have no proof. Does this still happen with ACPI disabled? - good question, i have been trying to track this down to bios or other settings or issues before running the kernel with ACPI permently disabled but that may do it. I'll boot tonight with it off and see if that helps. Having ACPI enabled can also cause interrupt related problems in some configurations. - do you mean disabling ACPI in the kernel when it asks if you want to permanetly disable? - I also recieved this answer from a user: In bios Disable power management options. Set operation system option to other, or just not ms/windows, disable all plug-n-play options. I did this last night and it ran for 2 hours without incident. (had to go out, didn't want to take the chance of it freezing up when not home, so i shutdown) but it did run for 2 hours with no problems and did not freeze up. thanks for the responses mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Situation: This is a new install of 5.2 ISO from ftp.freebsd.org. (install went fine, etc, everything is up and running well,... but) Everything runs fine for about an hour and a half then everything freezes ( doesnt recognize keyboard, mouse, anything etc ) and i have to do a cold reboot ( ouch! ). This is in console or in X. (I experienced similiar problems trying to run linux on this box, it would get kernel panics, only cold reboot would release it.) I do believe this to be related to ACPI but have no proof. (i would love to be able to provide more diagnostics or log output but there is no output to include, when the system comes back up, all it knows is that it was shutdown improperly) (I hear the processor fan speed increase alot too, like when i'm compiling from source, it's almost like something is overworking the processor and wont release it)(side note, i use usb and a kvm switch, i don't think that's related though, it seems to work fine) This is a relatively new machine but i have seen other posters running similiar, so it should run freebsd fine. Asus Motherboard for AMD Athlon/XP/Duron Processors, Model# A7N8X Deluxe Chipset: NVIDIA nForce2 SPP, nForce2 MCP-T AMD Athlon XP 2200+, 266 MHz FSB, 256K Cache Processor 512MB RAM (Geil). I have learned quite a bit by searching the lists which helped the APCI problems etc. 5.2 wont boot 'regular (choice 1)' unless you disable parallel port in bios. ( boot process will just hang on Timer miliseconds display output,... sorry not with the box, don't remember the exact output ). also, i found this: However, I managed to work around these freezes by removing the two SMP-related lines from my kernel configuration: options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC so, i will try that tonight. I am hoping someone with a similiar set-up (these are very popular modern componets) can share experiances or a bios set up or kernel config, or other information. I really want to run freebsd on this box. thanks for your time. mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
new install of 5.2 ISO aft hour system freeze cold reboot only option
Situation: This is a new install of 5.2 ISO from ftp.freebsd.org. (install went fine, etc, everything is up and running well,... but) Everything runs fine for about an hour and a half then everything freezes ( doesnt recognize keyboard, mouse, anything etc ) and i have to do a cold reboot ( ouch! ). This is in console or in X. (I experienced similiar problems trying to run linux on this box, it would get kernel panics, only cold reboot would release it.) I do believe this to be related to ACPI but have no proof. (i would love to be able to provide more diagnostics or log output but there is no output to include, when the system comes back up, all it knows is that it was shutdown improperly) (I hear the processor fan speed increase alot too, like when i'm compiling from source, it's almost like something is overworking the processor and wont release it)(side note, i use usb and a kvm switch, i don't think that's related though, it seems to work fine) This is a relatively new machine but i have seen other posters running similiar, so it should run freebsd fine. Asus Motherboard for AMD Athlon/XP/Duron Processors, Model# A7N8X Deluxe Chipset: NVIDIA nForce2 SPP, nForce2 MCP-T AMD Athlon XP 2200+, 266 MHz FSB, 256K Cache Processor 512MB RAM (Geil). I have learned quite a bit by searching the lists which helped the APCI problems etc. 5.2 wont boot 'regular (choice 1)' unless you disable parallel port in bios. ( boot process will just hang on Timer miliseconds display output,... sorry not with the box, don't remember the exact output ). also, i found this: However, I managed to work around these freezes by removing the two SMP-related lines from my kernel configuration: options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC so, i will try that tonight. I am hoping someone with a similiar set-up (these are very popular modern componets) can share experiances or a bios set up or kernel config, or other information. I really want to run freebsd on this box. thanks for your time. mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
HELP PLEASE FATAL TRAP 21 PC98
Ok People...first I'll admit that I suck at bsd and I'm a sorta newbie. I'm using a PC 9821 Ls150 with the pc98 5.2 distro. I keep getting this funky kernel message below and it restarts my box ever time: Fatal trap 12: page fault while in kernel mode fault virtual address = 0x0 fault code = supervisor read, page not present instruction pointer = 0x8:0x0 stack pointer = 0x10:0xc4fbc7c frame pointer = 0x10:0xc4bfc7c84 code segment= base 0x0, limit 0xf, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags= interrupt enabled, resume, IOPL = 0 current process = 27 (swi8: tty:sio clock) trap number = 12 panic: page fault I was told to put ddb in the kernel but I can't get to a prompt to open the kernel conf file. None of the boot commands seem to work ie...gdb or the flags. What can I do ...am I just doing it wrong. How do I stop the error?? How can I get to a prompt that will let me ls and cd to boot/kernel and so forth ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
possibly lost data by Burning Raw Data CDs
Greetings; Was running FreeBSD 5.1 Release on a Dell Inspiron 8500 with a CD-RW/DVD Combo drive and backed up data onto several new CD-RWs simply as follows: burncd -s max data archive.tar.gz Then after installing FreeBSD 5.2 Release, tried restoring as follows: tar -xvzf /dev/acd0 And unfortunately ended up with only error messages such as input/output, unexpected end of archive/file and child returned status 2 from all the CD-RWs too. Not sure if it has anything to do with not blanking or erasing the new CD-RWs first or not adding fixate to the burncd command, but planning to always now just burn and thoroughly test ISOs for even one file, and only desperately seeking to first recover this data any which way. Thank you very much for any help here, ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, During installation , after the device probe i get a message saying that no disk drives were ffound and the installation stops there. Also its unable to load a few modules. I have dedicated a formatted 1.6 gb HD for the install so theres no problem with partitions.Any suggestions? Thanks, Akshay. mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: help me!!!
- Original Message - From: Dany [EMAIL PROTECTED] To: dc [EMAIL PROTECTED] Cc: freebsd-questions [EMAIL PROTECTED] Sent: Friday, January 02, 2004 8:38 PM Subject: Re: help me!!! This question has been asked yesterday. Try using shutdown -p now instead of -h and you system should turn his power off automatically. DAny Also try with the command halt, altough in this case the system does not power off. Bruno dc wrote: Hi, I have just build a freeBSD box with some parts I had lying around. I was wondering what I need to do to make the machine shutdown completely. When I run the shutdown -h now command the machine starts the process and than I get the message that I need to press any key to reboot. I would like to turn off automatically.It used to shutsdown automatically in in Windows :-) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Need some advice for a mail setup...
Hello everyone and Happy Holidays. I was hoping to get some suggestions and advice here for a particular setup im designing. Here is what I want to do. I am going to use FreeBSD 4.9 as our Mail server. It will be running Postfix, courier-IMAP and a few other goodies. I also want to run webmail on this as well. My main question is the actual design for this. For instance, right now, our mail server for our company is in the private part of our network, and is only accessible to my LAN and the localhost. (NOTE: I have a mail gateway setup that checks all incoming email first, then passes it to the mail server) It has been working great so far. The trick is, how do I implement webmail with this particular setup? I do not want to open up a firewall rule and allow webmail access directly to my mail server that is on the private network. Thus, i've thought of two things, but im sure there are more options: 1) Setup and configure the mail server accordingly, and place it on our DMZ. 2) Setup webmail on the Mail gateway and have it access the internal mail server so users can view and send email. But I was hoping to get some further advice and recommendations here. I really do appreciate everyones help and insigt here. THanks Jason mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Transparent filtering and ipfilter
Date: 16 dec 2003 I'm interested in configuring Filtering Bridges (as described in the Alex Dupre howto) using 4.9-RELEASE. I'd like to know: - Filtering bridges is supported with ipfilter? - ipfilter is more portable, but what are its limits with bridges? - What about adv/disav of ipfilter vs ipfw? thanks in advance Roberto ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Postfix and FreeBSD question
Hello everyone. I am in the process of setting up a Mail server that will be running FreeBSD 4.9 and postfix. My question is that, by default, FreeBSD has sendmail up and running. I seem to vaguely remember that there were a few extra steps that were needed to remove and install postfix correctly. I quickly read a README_FILE for postfix, but it was not really clear. Thus, I was hoping to ask some questions here and get some additional feedback about this particular setup. I appreciate the help. Jason P.S. I am planning to install postfix through ports. :) mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problem with mount
uname -a | FreeBSD villa.fixer.com 4.8 RELEASE FreeBSD 4.8 RELEASE #0:TUE DEC11 20:54:12 GMT 2003 root@:/usr/src/sys/compile/VILLATV i386 --- I'm having a problem mounting dos files from the windows drive. I've tried every kind of mount command (mount_msdos, mount, etc) and every kind of option or options. I even included /mnt in the command. Nothing works. I am not using anything in the fstab file for this mount. 5 years ago, it was working perfectly on my computer. My only mistake, I did not write it down in my FreeBSD note files. The file I'm trying to mount is ad0s1 (windows 98). FreeBSD is mounted on ad0s2. I have read all the MOUNT man pages. Maybe a little too complex for me. Please tell me the one line command. Thanks, Bruce Meehl [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Sendmail Problem Stable 4.0
Dear All I have a FreeBSD 4.0 stable box with Sendmail, ipfilter and apache working on it. I am changing my setup here to use the box principally as a firewall and pass or relay mail through it to an SMTP server behind the firewall. The SMTP mails are rejected. The SMTP gets thru when the firewall box is removed from in between. I have created and edited sendmail.cw to include the domains I want relayed. I have edited the NAT config file: map ed0 192.168.0.0/24 - 0.0.0.0/32 portmap tcp/udp 4:65000 map ed0 192.168.0.0/24 - 0.0.0.0/32 #DH added for mail 2003-11-16 rdr ed0 192.168.0.0/24 port 25 - 192.168.0.30 port 25 #DH added for WWW server 2003-11-16 #rdr ed0 192.168.0.0/24 port 80 - 192.168.0.30 port 80 The smtp server is on 192.168.0.30. The internet side is 192.168.1.x I think something else needs to be done to persuade sendmail to relay the e-mails, but what? Any assistance would be greatly appreciated. Kind regards, David Hingston ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: newbie: vi - go to previous file
On Tuesday, November 11, 2003, Konrad Heuer wrote: On Tue, 11 Nov 2003, Zhang Weiwu wrote: Hello. I am using the BSD's vi not vim. I learned from :exusage that :N is to swich to the next file in argument list while :P swich to the previous file. :N woks fine, while :P does nothing. say, I run vi file1 file2, which opens file1, :N begin to edit file2, then I press :P, I thought I should go to file1, but I'm still editing file2. try :prev - :p seems to be an abbreviation for a different command. Regards Konrad Heuer ([EMAIL PROTECTED]) ___ ___ When you edit multiple files in vi, (whether you start from the command line like vi file1 file 2. . . , or by starting vi with a single file or with no file argument at all, in which case you can load a file from inside the vi with the vi command ':n file_to_load'), you can cycle from a file to the next (and when you are at the last,you restart with the first and so on,like in a ring) inside the editor with the command ':n#' (yes, :n#) Cheers Bruno --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: how to map pfkeys to screen -r cmds
On Saturday, November 15, 2003,Marty Landman wrote: Thought I recently read something in the Handbook about being able to switch screens easily using the pfkeys but didn't see the how of it. Today learned the screen cmd following a tip from the fbds Diary but the usefulness would be greatly enhanced with some quick way to go through the screens. How hard is this effect to set up, either with or w/o screens? Also I'm ssh'ing into my session in case that matters. Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml Marty, to switch between screens (there are eight pre-configured virtual screens on FreeBSD,named /dev/stty0 to /dev/stty7, stty0 being also the console output for system messages), you use the key combination Alt-Ctrl-F1 to Alt-Ctrl-F8, or Ctrl-F1 to Ctrl-F8 (the latter ones do not work if you want to switch to screen 0-8 while you are in your desktop environment or window manager). If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #10 (you can change the virtual screens in the /etc/ttys file). So remember that in case you switch to any of the virtual screens 0 to 7,if you want to resume your X session (your window manager or desktop environment), you have to press Alt-F10. Best regards Bruno --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: how to map pfkeys to screen -r cmds Errata corrige
On my previous reply message,the line ...If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #10... reads ...If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #9 The 1st virtual screen is stty0,so the 10th is stty9, the default one allocated to X sessions. That's why you will use Ctrl-F10 while on another screen to resume X session's screen (10th:stty9). On Saturday, November 15, 2003,Marty Landman wrote: Thought I recently read something in the Handbook about being able to switch screens easily using the pfkeys but didn't see the how of it. Today learned the screen cmd following a tip from the fbds Diary but the usefulness would be greatly enhanced with some quick way to go through the screens. How hard is this effect to set up, either with or w/o screens? Also I'm ssh'ing into my session in case that matters. Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml Marty, to switch between screens (there are eight pre-configured virtual screens on FreeBSD,named /dev/stty0 to /dev/stty7, stty0 being also the console output for system messages), you use the key combination Alt-Ctrl-F1 to Alt-Ctrl-F8, or Ctrl-F1 to Ctrl-F8 (the latter ones do not work if you want to switch to screen 0-8 while you are in your desktop environment or window manager). If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #10 (you can change the virtual screens in the /etc/ttys file). So remember that in case you switch to any of the virtual screens 0 to 7,if you want to resume your X session (your window manager or desktop environment), you have to press Alt-F10. Best regards Bruno --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
xinit: xf86OpenConsole: Server must be running with root permissions
I have problems with my startx script,see my other email when I invoke startx, it seems to 'freeze' for a minute or so,then starts. Before fixing the startx issue (I think startx has been overwritten by the fluxconf-XFree86-libraries-4.3.0 installation), I tested xinit after setting the root setuid bit of the X server (which on my machine points to XF86_SVGA).According to the xinit error,I should be using Xwrapper to start the server or xdm. We strongly advise against making the server SUID root!. So,with the setuid bit set,xinit works,but the elegant solution would be to use Xwrapper.How can I use Xwrapper ? Does it accept a server name to execute ? When you say 'runlevel 5' do you mean the kernel securelevels (i remember runlevels used as boot levels in linux) ? Thank you for help Bruno - Original Message - From: Scott W [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Thursday, October 30, 2003 3:56 PM Subject: Re: xinit: xf86OpenConsole: Server must be running with rootpermissions You should be starting X via the 'startx' command if you're not using runlevel 5/[xgk]dm. Try that and see if the same problem persists. Scott [EMAIL PROTECTED] wrote: Hi, I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0. Since then,when I invoke xinit, it exits with the error xf86OpenConsole: Server must be running with root permissions I include the output of 'uname -a' and the brief output from xinit for the problem Thank you very much Bruno [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2 uname -a FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2xinit XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1.1-STABLE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct6, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Fatal server error: xf86OpenConsole: Server must be running with root permissions You should be using Xwrapper to start the server or xdm. We strongly advise against making the server SUID root! When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). === [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 3exit [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-newbies To unsubscribe, send any mail to [EMAIL PROTECTED] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo
when I invoke startx, it seems to 'freeze' for a minute or so,then starts
Hi, I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0. Since then,when I invoke startx, it seems to 'freeze' for a minute or so, then it starts the window manager. I include the output of 'uname -a' and the brief trace of startx execution for the problem,also reported inside the trace (read it): root# uname -a FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 root# startx + whoseargs=client + listen_tcp=-nolisten tcp + [ x != x ] + [ x = x ] + [ x = x ] + client=/root/.xinitrc + [ x = x ] + [ x = x -a x = x ] + server= + [ x = x ] + XAUTHORITY=/root/.Xauthority + export XAUTHORITY + removelist= + uname + hostname + hostname=ciao.singles.it + authdisplay=:0 + dd if=/dev/urandom bs=16 count=1 + hexdump -e %08x + mcookie=631d8300f8a5a21b3903a5cbcd2778c2 + xauth list :0 + grep :0 + xauth list ciao.singles.it:0 + grep ciao.singles.it:0 [THE PROBLEM:it seems to 'freeze' for a minute or so then...] [finally the windows are showed] [exit window manager] . . ['waiting for X server to shut down'] . . + [ ciao.singles.it:0 != x ] + xauth remove ciao.singles.it:0 xauth: (argv):1: bad display name ciao.singles.it:0 in remove command --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
xinit: xf86OpenConsole: Server must be running with root permissions
Hi, I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0. Since then,when I invoke xinit, it exits with the error xf86OpenConsole: Server must be running with root permissions I include the output of 'uname -a' and the brief output from xinit for the problem Thank you very much Bruno [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2 uname -a FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2xinit XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1.1-STABLE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct6, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Fatal server error: xf86OpenConsole: Server must be running with root permissions You should be using Xwrapper to start the server or xdm. We strongly advise against making the server SUID root! When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). === [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 3exit Script done on Thu Oct 30 10:40:19 2003 --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
when I invoke startx, it seems to 'freeze' for a minute or so,then starts
- Original Message - From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Thursday, October 30, 2003 12:20 PM Subject: when I invoke startx, it seems to 'freeze' for a minute or so,then starts Hi, I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0. Since then,when I invoke startx, it seems to 'freeze' for a minute or so, then it starts the window manager. I include the output of 'uname -a' and the brief trace of startx execution for the problem,also reported inside the trace (read it). THANK YOU VERY MUCH BRUNO root# uname -a FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 root# startx + whoseargs=client + listen_tcp=-nolisten tcp + [ x != x ] + [ x = x ] + [ x = x ] + client=/root/.xinitrc + [ x = x ] + [ x = x -a x = x ] + server= + [ x = x ] + XAUTHORITY=/root/.Xauthority + export XAUTHORITY + removelist= + uname + hostname + hostname=ciao.singles.it + authdisplay=:0 + dd if=/dev/urandom bs=16 count=1 + hexdump -e %08x + mcookie=631d8300f8a5a21b3903a5cbcd2778c2 + xauth list :0 + grep :0 + xauth list ciao.singles.it:0 + grep ciao.singles.it:0 [THE PROBLEM:it seems to 'freeze' for a minute or so then...] [finally the windows are showed] [exit window manager] . . ['waiting for X server to shut down'] . . + [ ciao.singles.it:0 != x ] + xauth remove ciao.singles.it:0 xauth: (argv):1: bad display name ciao.singles.it:0 in remove command --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: when I invoke startx, it seems to 'freeze' for a minute or so,then starts
Hi, I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0. Since then,when I invoke startx, it seems to 'freeze' for a minute or so, then it starts regularly the window manager. I include the output of 'uname -a' ,the X Windows XFree86 version, and the brief trace of startx execution for the problem, also reported inside the trace (read it). Thank you for help Bruno root# uname -a FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 VERSION OF X Windows (XFree86): XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 Operating System: FreeBSD 4.1.1-STABLE i386 [ELF] root# startx + whoseargs=client + listen_tcp=-nolisten tcp + [ x != x ] + [ x = x ] + [ x = x ] + client=/root/.xinitrc + [ x = x ] + [ x = x -a x = x ] + server= + [ x = x ] + XAUTHORITY=/root/.Xauthority + export XAUTHORITY + removelist= + uname + hostname + hostname=ciao.singles.it + authdisplay=:0 + dd if=/dev/urandom bs=16 count=1 + hexdump -e %08x + mcookie=631d8300f8a5a21b3903a5cbcd2778c2 + xauth list :0 + grep :0 + xauth list ciao.singles.it:0 + grep ciao.singles.it:0 [THE PROBLEM:at this point it seems to 'freeze' for a minute or so then...] [finally the windows are showed] [exit window manager] . . ['waiting for X server to shut down'] . . + [ ciao.singles.it:0 != x ] + xauth remove ciao.singles.it:0 xauth: (argv):1: bad display name ciao.singles.it:0 in remove command --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Fw: xinit: xf86OpenConsole: Server must be running with root permissions
Scott, I have problems with my startx script,see my other email when I invoke startx, it seems to 'freeze' for a minute or so,then starts. Before fixing the startx issue (I think startx has been overwritten by the fluxconf-XFree86-libraries-4.3.0 installation), I tested xinit after setting the root setuid bit of the X server (which on my machine points to XF86_SVGA).According to the xinit error,I should be using Xwrapper to start the server or xdm. We strongly advise against making the server SUID root!. So,with the setuid bit set,xinit works,but the elegant solution would be to use Xwrapper.How can I use Xwrapper ? Does it accept a server name to execute ? When you say 'runlevel 5' do you mean the kernel securelevels (i remember runlevels used as boot levels in linux) ? Thank you for help Bruno - Original Message - From: Scott W [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Thursday, October 30, 2003 3:56 PM Subject: Re: xinit: xf86OpenConsole: Server must be running with rootpermissions You should be starting X via the 'startx' command if you're not using runlevel 5/[xgk]dm. Try that and see if the same problem persists. Scott [EMAIL PROTECTED] wrote: Hi, I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0. Since then,when I invoke xinit, it exits with the error xf86OpenConsole: Server must be running with root permissions I include the output of 'uname -a' and the brief output from xinit for the problem Thank you very much Bruno [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2 uname -a FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2xinit XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1.1-STABLE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct6, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Fatal server error: xf86OpenConsole: Server must be running with root permissions You should be using Xwrapper to start the server or xdm. We strongly advise against making the server SUID root! When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). === [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 3exit --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
dumping the contents of a hard-drive
Hi. I have a FreeBSD 5.1 box that has 2 hard drives. They are both Seagate ST380011A (Capacity: 78.18 GB). Currently I am only utilizing one hard drive and Iam planning to use the other one as a back-up. Which utility can I use to dump all the contents of the my first drive to the second drive? Thank you very much in advance. - Gil Agno Virtucio - ** Get your free E-Mail account at WWW.DIGITELONE.COM ** ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Process priority
Is there some way ho to assign priority (cpu time) for each process ? I'm using Samba server for PDF printing and in case of big printouts it could eat whole cpu time for few seconds, so i'd like to control it and give to this process lower priority. Thanks P.Duda ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
can I install a port with a different (previous) version ?
Hi, I periodically update the port collection.However,sometimes may happen that I need to install a different (previous) version of a port,for example when the current version fails to build. (This happened recently with the latest version of wine,a windows emulator). How can achieve this ? Thank you Bruno --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
icewm port: make error
checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking for nl_langinfo... yes checking whether nl_langinfo supports CODESET... yes checking whether nl_langinfo supports _NL_CTYPE_CODESET_NAME... no checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking whether _libiconv_version is declared... yes assuming iconv.h belongs to GNU libiconv checking whether iconv converts from ISO-8859-1 to UCS-4//TRANSLIT... yes checking whether iconv converts from ISO-8859-2 to UCS-4//TRANSLIT... yes checking whether iconv converts from KOI8-R to UCS-4//TRANSLIT... yes checking whether iconv converts from EUC-JP to UCS-4//TRANSLIT... yes checking whether iconv converts from BIG5 to UCS-4//TRANSLIT... yes checking for bindtextdomain... no checking for bindtextdomain in -lintl... yes checking for xgettext... /usr/local/bin/xgettext checking for msgmerge... /usr/local/bin/msgmerge checking for msgfmt... /usr/local/bin/msgfmt checking for XInternAtoms in -lX11... yes checking for IceConnectionNumber in -lICE... (cached) yes checking for XShapeCombineRectangles in -lXext... yes checking for xft-config... /usr/X11R6/bin/xft-config checking for esd-config... /usr/local/bin/esd-config checking esd.h usability... yes checking esd.h presence... yes checking for esd.h... yes checking for esd_open_sound in -lesd... yes checking for XineramaQueryScreens in -lXinerama... no configure: error: Xinerama can not be found === Script configure failed unexpectedly. Please report the problem to [EMAIL PROTECTED] [maintainer] and attach the /usr/ports/x11-wm/icewm/work/icewm-1.2.13/config.log including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11-wm/icewm. --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
icewm port: make error
checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking for nl_langinfo... yes checking whether nl_langinfo supports CODESET... yes checking whether nl_langinfo supports _NL_CTYPE_CODESET_NAME... no checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking whether _libiconv_version is declared... yes assuming iconv.h belongs to GNU libiconv checking whether iconv converts from ISO-8859-1 to UCS-4//TRANSLIT... yes checking whether iconv converts from ISO-8859-2 to UCS-4//TRANSLIT... yes checking whether iconv converts from KOI8-R to UCS-4//TRANSLIT... yes checking whether iconv converts from EUC-JP to UCS-4//TRANSLIT... yes checking whether iconv converts from BIG5 to UCS-4//TRANSLIT... yes checking for bindtextdomain... no checking for bindtextdomain in -lintl... yes checking for xgettext... /usr/local/bin/xgettext checking for msgmerge... /usr/local/bin/msgmerge checking for msgfmt... /usr/local/bin/msgfmt checking for XInternAtoms in -lX11... yes checking for IceConnectionNumber in -lICE... (cached) yes checking for XShapeCombineRectangles in -lXext... yes checking for xft-config... /usr/X11R6/bin/xft-config checking for esd-config... /usr/local/bin/esd-config checking esd.h usability... yes checking esd.h presence... yes checking for esd.h... yes checking for esd_open_sound in -lesd... yes checking for XineramaQueryScreens in -lXinerama... no configure: error: Xinerama can not be found === Script configure failed unexpectedly. Please report the problem to [EMAIL PROTECTED] [maintainer] and attach the /usr/ports/x11-wm/icewm/work/icewm-1.2.13/config.log including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11-wm/icewm. --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
vinum concatenated raid setup problems
Hello all, I have been trying without success to implement a simple vinum concatenated RAID system made up of 2 IDE drives. The boot drive is located on another physical drive and is not part of the RAID. The problems: 1 - I am able to build the RAID, create a filesystem, and mount to a directory in the tree. But I am not able to figure out how to add an entry to my /etc/fstab file so that it is automatically mounted on reboot. I have looked in the handbook and all it says is to add the proper entries. I simple do not know what entry to add. 2 - On reboot, the vinum config is erased. (or at least thats what it looks like...see dmesg output for info) It is my understanding that on reboot, vinum reads it's configuration from each vinum drive. Since I was able to create and mount the RAID, I assume that the configuration would still be there on reboot, even thought it is not being mounted with fstab (see problem 1). I have tried this on several systems and have yet to be successful in having a vinum config survive reboot. I have re-read and re-read the vinum section in the handbook and have looked elsewhere but have had no luck :( Relevent Info: I have not made any changes to system or vinum sources. The system is a generic 5.1 installed from FTP today. From the box: VINUM STATE BEFORE REBOOT ## vinum - l 2 drives: D a State: up /dev/ad2A: 981/28629 MB (3%) D b State: up /dev/ad3A: 981/28629 MB (3%) 1 volumes: V core State: up Plexes: 2 Size: 27 GB 2 plexes: P core.p0 C State: up Subdisks: 1 Size: 27 GB P core.p1 C State: up Subdisks: 1 Size: 27 GB 2 subdisks: S core.p0.s0State: up D: aSize: 27 GB S core.p1.s0State: up D: bSize: 27 GB #VINUM STATE AFTER REBOOT ## vinum - l 0 drives: 0 volumes: 0 plexes: 0 subdisks: #VINUM CONFIG FILE## thegibsor# cat vinum_config drive a device /dev/ad2 drive b device /dev/ad3 volume core plex org concat sd length 27g drive a plex org concat sd length 27g drive b RELEVANT DMESG BEFORE REBOOT ad0: 28629MB QUANTUM FIREBALLlct20 30 [58168/16/63] at ata0-master UDMA100 ad2: 28629MB QUANTUM FIREBALLlct20 30 [58168/16/63] at ata1-master UDMA100 ad3: 28629MB QUANTUM FIREBALLlct20 30 [58168/16/63] at ata1-slave UDMA100 acd0: CDROM LTN486S at ata0-slave PIO4 Mounting root from ufs:/dev/ad0s1a vinum: drive a is up vinum: drive b is up vinum: core.p0.s0 is up vinum: core.p0 is up vinum: core is up vinum: core.p1 is faulty vinum: core.p1.s0 is reviving, not up vinum: core.p1.s0 is up by force vinum: core.p1 is up vinum: core.p1.s0 is up RELEVANT DMESG AFTER REBOOT# ad0: 28629MB QUANTUM FIREBALLlct20 30 [58168/16/63] at ata0-master UDMA100 ad2: 28629MB QUANTUM FIREBALLlct20 30 [58168/16/63] at ata1-master UDMA100 ad3: 28629MB QUANTUM FIREBALLlct20 30 [58168/16/63] at ata1-slave UDMA100 acd0: CDROM LTN486S at ata0-slave PIO4 Mounting root from ufs:/dev/ad0s1a ###UNAME OUTPUT# $ uname -a FreeBSD thegibsor.thebeatbox.org 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i3 86 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: natd question
have you tried this reading this? http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-natd.html dont forget to set the gateway IP address of your network clients to the IP address of your FreeBSD nat server. hope this helps... - Gil Agno Virtucio Janitor/Collector/Messenger NEC System Integration and Construction Philippines Inc. 15th Floor BPI Buendia Center.__ ___ ___ . Gil Puyat Ave. Makati City 1200 / _/|__|/ | \|| Cellphone : +639163989695 / \ ___| /~\| Office Phone: +6328914167 \\_\ \ \Y/|___ \__ /__|\___|_ /|___ \ \/ \/ \/ - -Original Message- From: Michelle [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 22, 2003 6:00 AM To: [EMAIL PROTECTED] Subject: natd question i am running freebsd 4.6.2. i have 2 nic cards on the machine, one which is the external interface and connects to a router which connects to dsl. the other is internal interface for our subnet. i have enabled natd on the machine, but still cannot get packets out when on the subnet. i can ssh to the external interface, but can't ssh to a machine that is outside of our network. i checked ps aux to make sure natd is running and checked the firewall rules to make sure the natd divert rule is there. is there something else i need to configure? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ** Get your free E-Mail account at WWW.DIGITELONE.COM ** ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Regarding spam
yes they can send using the BCC field. or put your email in a mailing-list or use mail forwarding and other sort of stuff :) You can try using Spamassassin. if you are using postfix you can try this. :) http://ezine.daemonnews.org/200309/postfix-spamassassin.html hope this helps... - Gil Agno Virtucio Janitor/Collector/Messenger NEC System Integration and Construction Philippines Inc. 15th Floor BPI Buendia Center.__ ___ ___ . Gil Puyat Ave. Makati City 1200 / _/|__|/ | \|| Cellphone : +639163989695 / \ ___| /~\| Office Phone: +6328914167 \\_\ \ \Y/|___ \__ /__|\___|_ /|___ \ \/ \/ \/ - -Original Message- From: jason dictos [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 21, 2003 9:44 PM To: [EMAIL PROTECTED] Subject: Regarding spam Hi All, I run my own mailsever, and I just wanna know its possible for someone to send an email to my mail box, but yet have no one specified in the TO or CC fields. I guess those fields are probably optional, but how can I adjust my mailserver to reject messages sent to someones mailbox without their name being in the TO or CC fields? P.S. My mailserver is a CLOSED relay. Thanks, -Jason ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ** Get your free E-Mail account at WWW.DIGITELONE.COM ** ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
I upgraded from CVSup: did I get a -stable branch ?
Hi, just a question for a doubt I have:I updated the src tree via cvsup using the file included below.According to some BSD literature (not found in the handbook), by using the 'RELENG_4' tag in the supfile, I will get the source tree for the latest -STABLE branch, and that is what I wanted.I CVSuped,the I recompiled the source tree and the kernel,according to the FreeBSD Handbook instructions. All went OK.This is the output from the 'uname -a' command after the process: FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 I have two questions: 1)looking at the output of 'uname', is this a STABLE version of FreeBSD (as I would expect) ? 2)if I wanted, for example, 4.5 stable, or instead 4.3 stable, which options should I put in the supfile ? Thank you very much. Bruno THE SUPFILE: -- # $FreeBSD: /root/cvsup/stable-supfile,v 1.19.2.4 2000/08/18 18:50:21 jkh Exp $ # *default host=cvsup10.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs tag=RELENG_4 *default delete use-rel-suffix *default compress ## Main Source Tree. src-all -- --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cvsupdate only bge driver
I understand what you are saying Mike, But here is the issue: I built a 5.1-RELEASE box and cvsuped it to -p10. After reboot I am getting a flood of bge0 : gigabit link up messages. I am on version 1.41 of the driver ... the latest cvs submission was 1.55. A newsgroup posting suggested that I need the latest code to make this issue go away. I do not want to go to -CURRENT because this will be a production box. So what am I supposed to do ? Help appreciated :), -ansh Original Message: - From: Mike Tancsa [EMAIL PROTECTED] Date: Wed, 15 Oct 2003 13:26:15 -0400 To: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: cvsupdate only bge driver Unless you really know what you are doing (in that case you would not need to ask this question) it is HIGHLY recommended NOT to do this. The bge driver in its latest form could depend on other parts of the kernel that would also need to be updated. You really should cvsup everything, not parts. ---Mike At 01:19 PM 15/10/2003, [EMAIL PROTECTED] wrote: Hi all, I want to update only the bge driver to its latest source via cvsup and then compile it into the kernel. Can someone guide me about what steps I need to take ? Thanks, -ansh mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Booting without keyboard.
Hi, I have recently installed FreeBSD 4.8-RELEASE-p10 on a Intel SE7501WV2 board. I am using a PS2 keyboard without mouse. It works fine. However, when i boot without the keyboard plugged into the system, it is not able to accept the keyboard when i plug in later. Is there a way to turn the keyboard always 'on' so that i can get it to work whenever i plug it in after the system is up and running. Appreciate your advise. Thank You. Rgds, hc - Do you Yahoo!? The New Yahoo! Shopping - with improved product search ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Ping response: sendto: Permission denied
Hi, in the process of configuring my ppp to access some internet provider (I'm using an analog modem), at a certain point of the configuration, I want to test my network with ping,with these results: root# ping localhost PING localhost.singles.it (127.0.0.1): 56 data bytes ping: sendto: Permission denied ping: sendto: Permission denied ^C --- localhost.singles.it ping statistics --- 3 packets transmitted, 0 packets received, 100% packet loss My hostname is ciao.singles.it. # ping ciao PING ciao.singles.it (10.0.0.2): 56 data bytes ping: sendto: Permission denied ping: sendto: Permission denied ^C --- ciao.singles.it ping statistics --- 4 packets transmitted, 0 packets received, 100% packet loss Somebody can help ? For your convenience,I include output from uname-a, the messages of the kernel at boot time (output of the command 'dmesg') and the main configuration file /etc/rc.conf. Thank you all Bruno - - OUTPUT OF UNAME -A: FreeBSD ciao.singles.it 4.2-RELEASE FreeBSD 4.2-RELEASE #0: Sun Mar 9 19:00:35 CET 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/CURRENT_WINE i386 - THE MESSAGES OF THE KERNEL AT BOOT TIME (OUTPUT OF 'DMESG') Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Sun Mar 9 19:00:35 CET 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/CURRENT_WINE Timecounter i8254 frequency 1193182 Hz CPU: AMD Duron(tm) Processor (701.25-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x631 Stepping = 1 Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR AMD Features=0xc044b18,AMIE,DSP,3DNow! real memory = 268435456 (262144K bytes) avail memory = 257523712 (251488K bytes) Preloaded elf kernel kernel at 0xc03cc000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 pcib1: PCI to PCI bridge (vendor=1106 device=8305) at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: NVidia Riva Ultra Vanta TNT2 graphics accelerator at 0.0 irq 3 rl0: RealTek 8139 10/100BaseTX port 0x1800-0x18ff mem 0x4400-0x44ff irq 3 at device 3.0 on pci0 rl0: Ethernet address: 00:06:4f:01:a1:d1 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: unknown card (vendor=0x14f1, dev=0x1033) at 4.0 irq 10 isab0: VIA 82C686 PCI-ISA bridge at device 20.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C686 ATA66 controller port 0x1440-0x144f at device 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: VIA 83C572 USB controller port 0x1400-0x141f irq 11 at device 20.2 on pci0 usb0: VIA 83C572 USB controller on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: VIA 83C572 USB controller port 0x1420-0x143f irq 11 at device 20.3 on pci0 usb1: VIA 83C572 USB controller on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ulpt0: Canon S100, rev 1.00/1.00, addr 2, iclass 7/1 chip1: VIA 82C686 ACPI interface at device 20.4 on pci0 pcm0: VIA VT82C686A AC'97 Audio port 0x145c-0x145f,0x1458-0x145b,0x1000-0x10ff irq 10 at device 20.5 on pci0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 joy0 at port 0x201 on isa0 IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled ad0: 29198MB SAMSUNG SV3063H [59323/16/63] at ata0-master UDMA66 ata1-master: DMA limited to UDMA33
Re: Ping response: sendto: Permission denied
'ipfw show' output: 65535 14 1068 deny ip from any to any 'kldstat' output: Id Refs AddressSize Name 14 0xc010 2cac40 kernel 21 0xc0e91000 4000 logo_saver.ko 32 0xc0e96000 11000linux.ko 41 0xc0ebb000 2000 rtc.ko After succeeding configuring my ppp, I would need a firewall (ipfw or ipfilter), and since you asked me about the presence of ipfw, how this presence can in the future be compatible with errors like the one described here executing ping ? - Original Message - From: Mike Tancsa [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Sunday, October 05, 2003 3:50 PM Subject: Re: Ping response: sendto: Permission denied Are you sure you dont have ipfw configured in the kernel ? What does ipfw show kldstat give ? ---Mike At 09:33 AM 05/10/2003, [EMAIL PROTECTED] wrote: Hi, in the process of configuring my ppp to access some internet provider (I'm using an analog modem), at a certain point of the configuration, I want to test my network with ping,with these results: root# ping localhost PING localhost.singles.it (127.0.0.1): 56 data bytes ping: sendto: Permission denied ping: sendto: Permission denied ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Ping response: sendto: Permission denied
Thank you very much Mike - Original Message - From: Mike Tancsa [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Sunday, October 05, 2003 5:48 PM Subject: Re: Ping response: sendto: Permission denied At 11:06 AM 05/10/2003, [EMAIL PROTECTED] wrote: 'ipfw show' output: 65535 14 1068 deny ip from any to any ipfw show is telling you that you have one firewall rule which denys everything from everything-- hence when you ping anything you get the error. You should add to /etc/rc.conf firewall_enable=YES # Set to YES to enable firewall functionality firewall_script=/etc/rc.firewall # Which script to run to set up the firewall firewall_type=OPEN# Firewall type (see /etc/rc.firewall) firewall_quiet=NO # Set to YES to suppress rule display firewall_logging=YES # Set to YES to enable events logging as you have it defined in your kernel. then do an 'ipfw show' and compare the output. 'kldstat' output: Id Refs AddressSize Name 14 0xc010 2cac40 kernel 21 0xc0e91000 4000 logo_saver.ko 32 0xc0e96000 11000linux.ko 41 0xc0ebb000 2000 rtc.ko this tells you that you have as kernel modules, linux, screensaver and rtc loaded and not statically compiled into your kernel. ---Mike ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
creating a package
Hi all, I want to distribute my software as a FreeBSD package. I have been through the porters handbook, but it soes not give comprehensive info about how to build packages. Is there a good doc on how to do that. Also what is the difference between .tbz and .tgz packages. Are they compatible ? Thanks for any pointers, -ansh mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Compiling doscmd
Hello all. I am trying to set up doscmd, following the man and Marc Fonvieille's article (http://soupnazi.org/freebsdzine/200103/doscmd.php). As X11 support is not compiled into doscmd in the 4.8-RELEASE system I am using, I installed the usr/src/usr.bin sources. Then: # cd /usr/src/usr.bin/doscmd # setenv X11BASE /usr/X11R6 # make Warning: Object directory not changed from original /usr/src/usr.bin/doscmd uudecode /usr/src/usr.bin/doscmd/cp437-8x8.pcf.gz.uu uudecode /usr/src/usr.bin/doscmd/cp437-8x14.pcf.gz.uu uudecode /usr/src/usr.bin/doscmd/cp437-8x16.pcf.gz.uu make: don't know how to make /usr/src/usr.bin/doscmd/../../share/syscons/fonts/cp437-8x8.fnt. Stop Not a big surprise, because man doscmd says: If doscmd emits the message X11 support not compiled in when supplied the -x switch, this support can be added by defining an environment variable X11BASE which points to the installed X Window System (normally /usr/X11R6) and then typing make install in the source directory (nor- mally /usr/src/usr.bin/doscmd). For this to work, the X programmer's kit must have been installed. Can anyone tell me what exactly X programmer's kit? refers to? Is the dependency on one particular library or package or do I have to resort to installing the entire X development distribution? (I know the latter course of action works, at least from one previous effort on a 5.1 machine, but I don't really want to install all this stuff just for the sake of doscmd, do I ?) Can't shed much light on this by Googling and I am afraid I am pretty clueless when it comes to rooting through Makefiles. Thanks in advance for your help. David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
user-ppp faster then pppd ?
Hi I recently tried to connect to the Internet using kernel ppp (pppd) instead off user ppp. I noticed that the connection was about 0.5 KB slower whith pppd when downloading the same file from the same server. I'm using a 56 K modem and have Release 5.1 installed, I also appended my /etc/ppp/options, ppp.conf files. What could be the reason for the different throughputs? ppp.conf--- # # PPP Sample Configuration File # Originally written by Toshiharu OHNO # Simplified 5/14/1999 by [EMAIL PROTECTED] # # See /usr/share/examples/ppp/ for some examples # # $FreeBSD: src/etc/ppp/ppp.conf,v 1.8 2001/06/21 15:42:26 brian Exp $ # default: set log Phase Chat LCP IPCP CCP tun command ident user-ppp VERSION (built COMPILATIONDATE) # Ensure that device references the correct serial port # for your modem. (cuaa0 = COM1, cuaa1 = COM2) # set device /dev/cuaa1 set speed 115200 set dial ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \\ AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT set timeout 180# 3 minute idle timer (the default) enable dns # request DNS info (for resolv.conf) freenet: # # edit the next three lines and replace the items in caps with # the values which have been assigned by your ISP. # set phone 019231770 set authname USERNAME set authkey PASSWORD set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR# Add a (sticky) default route options- # $FreeBSD: src/share/examples/pppd/options.sample,v 1.1 2002/01/29 00:23:33 cjc Exp $ # # Example for /etc/ppp/options file. # crtscts # enable hardware flow control 115200 modem # modem control line noipdefault # remote PPP server must supply your IP address. passive # wait for LCP packets defaultroute# put this if you want that PPP server will be your # default router ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
user-ppp faster then pppd ?
The difference is too small to be meaningful. when you have 56k modem and ~4.5KB throughput 0.5KB can make a big difference The change means that the second connection traveled over wires that were slightly noisier, or slightly busier, or one of a hundred other possibilities. The odds that there is a difference in connection speeds caused by a difference between ppp and pppd lie somewhere between zero and null. I tried it several times and got the same results, therefore it must be caused by the diffrence between ppp and pppd. Thanks ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
nwfs problems
Hello, I'm trying to mount some volumes from a Novell NetWare 5 using 4.8-RELEASE FreeBSD. dmesg shows the following error: /kernel: module_register_init: MOD_LOAD (nwfs, c024387c, 0xc0541500) error 17 From the original install I've made these modifs: #kernel config file options NWFS options NCP options IPX /boot/loader.conf if_ef_load=YES nwfs_load=YES /etc/rc.conf ipxrouted_enable=YES ifconfig_rl0f2_ipx=ipx 12345678 What's wrong. Cristian --- Xnet scaneaza automat toate mesajele impotriva virusilor folosind RAV AntiVirus. Xnet automatically scans all messages for viruses using RAV AntiVirus. Nota: RAV AntiVirus poate sa nu detecteze toti virusii noi sau toate variantele lor. Va rugam sa luati in considerare ca exista un risc de fiecare data cand deschideti fisiere atasate si ca MobiFon nu este responsabila pentru nici un prejudiciu cauzat de virusi. Disclaimer: RAV AntiVirus may not be able to detect all new viruses and variants. Please be aware that there is a risk involved whenever opening e-mail attachments to your computer and that MobiFon is not responsible for any damages caused by viruses. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
UDP Socket Options
FreeBSD ought to add per-socket socket options to allow a programmer to turn on and off the don't fragment bit for UDP and the UDP checksum, on a per socket basis. This, at least I would think, would be very easy for someone knowledgable in the networking implementation to implement. Thank you for you attention to this suggestion. __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 5.1 i386 not allowing incoming ftp connects?
On Mon, 1 Sep 2003 [EMAIL PROTECTED] wrote: I am trying to set up a FreeBSD 5.1 i386 box. Everything seems to be fine, except, incoming ftp is all rejected. Inetd.conf is set to allow ftp. Is there another switch to set somewhere to allow all incoming ftp? If so, what/where? Do you have inetd_enable=Yes in your /etc/rc.conf ? Then reboot (or perhaps executing # /etc/netstart will do). Regards, Uli. Thanks Bob Keys ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Where to go next
On Sat, 30 Aug 2003, Cesar Diaz wrote: I'm a Windows system administrator trying to learn FreeBSD. I have installed 5.0 on a few machine in my home lab and have the FreeBSD complete reference. My question is, what next? What kind of things, applications etc should I do to get more familiar with the OS? My goal is to use OS for system and security administration. You could take some old machines and try to set up some small useful things: - a squid-proxy - a samba/cups printer server p.ex. People at work will see, that freebsd is useful, stable (and cheap), and you will (have to) learn a lot. One day you might substitute your PDC by a freebsd/samba machine. Regards, Uli. Thanks for any suggestions. - Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
make.conf question
Hi! 1) Can I put any make option into make.conf that can be applied to ports (like inmake WITH_CALENDAR=yes install clean) or is this restricted to system ressources? 2) If yes - would this be advisable? - Or is there a big chance to produce some sort of mess? 3) Is make.conf also applied to gmake (used by many ports)? Thanks, Uli. +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: screen size is too large after freebsd install
On Sat, 23 Aug 2003, Joe wrote: Hello, My name is Joe and I am totally new to FREEBSD. I have spent over 2 days trying to install this software but no matter what I do the desktop size always ends up being too big. If I click on alt + ctrl + - or + nothing happens. Tryed altering the xf86config file it won't let me. 1) Sometimes you have to use + and - on your Num-Pad 2) Do you have entries like these in your XF86Config : Section Screen Identifier Screen0 Device Card0 MonitorMonitor0 DefaultColorDepth 16 SubSection Display Depth 1 EndSubSection SubSection Display Depth 4 EndSubSection SubSection Display Depth 8 EndSubSection SubSection Display Depth 15 EndSubSection SubSection Display Depth 16 Modes 1024x768 Modes 800x600 Modes 640x480 EndSubSection EndSection Regards, Uli. Why is this so hard seriously its a pain. Can anyone out there with a step by step guide on how to fix this help me please? Thanks Joe ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Why did you reply?
Hello, This is an auto-response. You recently sent an e-mail to [EMAIL PROTECTED] , probably in reply to a bulk e-mail from an admin, or a notification. Replying to that message did not get you to the person who you wished to contact. If you were trying to reply to the e-mail (from another user), please click the Click here to reply in the original e-mail. Or, contact the admin/user who sent you the mail. If you need to contact BbBoard support, you can e-mail [EMAIL PROTECTED] . Thanks. Best Boards :: BbBoard http://bb.bbboy.net ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error when starting quake3, Anybody????
I've been busy installing the new NVIDIA drivers so 3D support is utilised. Now I've recompiled my kernel so that the nessesary support whas selected. Then installed the driver and configured the XF86config file. (This al took like 2 weeks to find out). Now I got rid of al the previous error's I tried installing I got and installed quake3 to find out how Unix performs with the 3D drivers, but I'm getting the following error : ./quake3 Q3 1.32 linux-i386 Oct 7 2002 - FS_Startup - Current search path: /root/.q3a/baseq3 /usr/local/games/quake3/baseq3/pak8.pk3 (9 files) /usr/local/games/quake3/baseq3/pak7.pk3 (4 files) /usr/local/games/quake3/baseq3/pak6.pk3 (64 files) /usr/local/games/quake3/baseq3/pak5.pk3 (7 files) /usr/local/games/quake3/baseq3/pak4.pk3 (272 files) /usr/local/games/quake3/baseq3/pak3.pk3 (4 files) /usr/local/games/quake3/baseq3/pak2.pk3 (148 files) /usr/local/games/quake3/baseq3/pak1.pk3 (26 files) /usr/local/games/quake3/baseq3/pak0.pk3 (3539 files) /usr/local/games/quake3/baseq3 ./quake3.x86/baseq3 -- 4073 files in pk3 files execing default.cfg execing q3config.cfg couldn't exec autoexec.cfg Hunk_Clear: reset the hunk ok --- Input Initialization --- Joystick is not active. - Client Initialization - - Initializing Renderer --- - Client Initialization Complete - - R_Init - ...loading libGL.so.1: Received signal 11, exiting... RootlyGod# Does anybody know how to fix this? Again its the libGL driver but it seems to work like it should.GLXgears works and GLXinfo doesn't show any error's... Who has advice?? yours truly and hoping for a reply kristof ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
largest amount of memory a system can use
Hi all, I need to know what is the upper limit on the amount of memory a process can use under freebsd. Using rlimit (under 4.8-RELEASE) seems to return 2GB. Is there any plan to support larger than this in the future 5.x releases ? Thank you, -ansh mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Setting up a NAT Router that will route between 3 networks
I was wondering how to modify the appropriate files to setup a FreeBSD computer to act as a NAT Router, that would do the following: One NIC card is connected to a private network, with an IP address of 192.168.0.50. This will act as the gateway to all the computers in the technology center, to connect to the internet (Nic Card 2, Provided by Cox) and to the SDSU connection (Nic Card 3). We need the NAT Router to act as follows: 1) When computers of the private network access the general internet, we need the NAT to translate to the Cox.Net IP, except for all addresses beginning with 130.191.X.X or 146.244.X.X, or all traffic on port 1214 (KaZaa), which we need to go the SDSU Connection. 2) When the IP Address the data is going to begins with 146.244.X.X or 130.191.X.X, or any IP address using port 1214, we need the data to route through the SDSU IP Address. NIC Card Info: Nic Card 1 (Private Network): IP: 192.168.0.1 Subnet: 255.255.255.0 Gateway: 192.168.0.1 DNS: 192.168.0.2 Nic Card 2 (Cox Network): IP: 68.15.25.98 Subnet: 255.255.252.0 Gateway: 68.15.25.65 DNS: 209.242.128.107 DNS2: 209.242.128.101 NIC Card 3 (SDSU TNS Network): IP: 130.191.73.13 Subnet: 255.255.255.0 Gateway: 130.191.73.254 DNS: 130.191.1.1 DNS2: 130.191.200.1 If someone could give us step-by-step instructions to configure this, it would be appreciated. Stephen mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: I want using FreeBSD, but...
I am a Christian too. I go to church in the DFW area, and have friends in the Internet business that are also Christians using FreeBSD for their web servers, mail servers, etc. Nothing in the Bible says you cannot use FreeBSD. I use it for a web server and firewall, and I never see the Daemon image. Do you plan to look at the little Daemon logo every time you use your computer? God gave you a brain to reason and think with, and to acquire knowledge with. These types of statements are based on pure ignorance and potentially give Christians a bad name. (As seen in previous responses) The only caveat I can think of is in 1st Corinthians 10:31-33 where it says Do not cause anyone to stumble... Again, I do not display the little Daemon logo anywhere, so I think I'm OK. So in the future, I hope any Christian that wishes to use a far superior OS for their server / workstation needs, will consider FreeBSD and get a glimpse of this email. If questions remain, pray about your issue. Any responses, flames, etc can be sent to me directly, please do not clutter this list with topic any longer. Thanks, Ron Clark mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
how to check for bad blocks on IDE
Hi all, Is there a way in freebsd to check for bad blocks. Linux can do this via a -c flag to mkfs; but newfs for FreeBSD does not seem to have this functionality. The issue is that I have a IDE disk that I suspect to be bad )but there have been no ATA resets or logged errors so far). I either need to do a bad block check while creating a filesystem or some other diagnostic tool that can do a low level check on the disk. Thanks, -ansh mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Changed a filesystem's name -- now system hangs on reboot (help)
Any help appreciated... I feel like I've painted myself into a corner. The problem: system drops into /bin/sh on reboot without going through a full reboot because it can't find a filesystem (/storage) that it's looking for. I can't get into /etc/fstab to comment out the offending line because I can't get booted. This is as far as the boot gets: # mount: /storage: No such file or directory # Mounting /etc/fstab filesystems failed, startup aborted # Enter full pathname of shell or RETURN for /bin/sh: Background: I turned /storage into /var/ftp/many_more_files by unmounting it and renaming it and remounting it. Everything worked fine until I needed to do a reboot following a physical move of the box. I've looked through the handbook and tried (unsuccessfully) to reboot into single-user mode or otherwise get to a place where I can either comment out the line in fstab or skip the check -- no luck. Any ideas much appreciated. G. mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: running fsck on root filesystem
Hi Bill, Thanks for a good reply. Please see my replies inline. [EMAIL PROTECTED] wrote: I have a remote machine on whose boot disk I want to run fsck. Is there any way of booting freebsd form the network and then getting into fixit mode without a cdrom or a floppy ? I am using pxeboot so far. What is happening is that when I put installFixitHoloShell in the install.cfg then sysinstall throws me to the shell that is VERY barebones. I can't run even a 'ls'. In this case how do I figure out what disk slices I have in the system and on which I want to run fsck ? A lot you don't say here. One thing is _why_ you want to do this. Another is what you want to do. Your description is pretty vague. ---* Sorry I erred on the side of being laconic. Here is the situation: I have a file in /usr/something/file. Whenever I try to cp it to any other location, the machine freezes! I have tried a tar on the file (machine freezes) and a cat filename (same result). Here is a truss on the copy rack1-104.sjc# truss cp ft-v05.2003-06-30.104501-0700 /tmp stat(/tmp,0xbfbffb90) = 0 (0x0) umask(0x1ff) = 18 (0x12) umask(0x12) = 511 (0x1ff) readlink(/etc/malloc.conf,0xbfbff984,63) ERR#2 'No such file or directory' mmap(0x0,4096,0x3,0x1002,-1,0x0) = -2012909568 (0x88057000) break(0x806b000) = 0 (0x0) break(0x806c000) = 0 (0x0) break(0x806d000) = 0 (0x0) break(0x806e000) = 0 (0x0) stat(ft-v05.2003-06-30.104501-0700,0x806d160) = 0 (0x0) stat(/tmp/ft-v05.2003-06-30.104501-0700,0xbfbffa84) ERR#2 'No such file or directory' open(ft-v05.2003-06-30.104501-0700,0x0,00) = 3 (0x3) open(/tmp/ft-v05.2003-06-30.104501-0700,0x601,0100644) = 4 (0x4) mmap(0x0,5941955,0x1,0x1,3,0x0) = -2012905472 (0x88058000) dies If I do a cat here is what happens: rack1-104.sjc# truss cat ft-v05.2003-06-30.104501-0700 /dev/null open(ft-v05.2003-06-30.104501-0700,0x0,00) = 3 (0x3) fstat(1,0xbfbffb30) = 0 (0x0) readlink(/etc/malloc.conf,0xbfbffa90,63) ERR#2 'No such file or directory' mmap(0x0,4096,0x3,0x1002,-1,0x0) = -2012909568 (0x88057000) break(0x805a000) = 0 (0x0) break(0x805b000) = 0 (0x0) read(0x3,0x805a000,0x1000) = 4096 (0x1000) write(1,0x805a000,4096) = 4096 (0x1000) read(0x3,0x805a000,0x1000) = 4096 (0x1000) write(1,0x805a000,4096) = 4096 (0x1000) read(0x3,0x805a000,0x1000) = 4096 (0x1000) write(1,0x805a000,4096) = 4096 (0x1000) read(0x3,0x805a000,0x1000) = 4096 (0x1000) write(1,0x805a000,4096) = 4096 (0x1000) read dies At this point the machine stops responding to any console or network connections. After a while it spews ethernet flow control frames, indicating that the interrupts from the NIC to the kernel are not being serviced. I did a memory check on the box and it looks ok. So now I suspected the disk...and was looking for a good way to test it. fsck is always run on the root filesystem at boot time, in preen mode. If you're having some sort of filesystem errors, setting fsck_y_enable=YES in /etc/rc.conf will cause the startup scripts to automatically run 'fsck -y' if fsck fails in preen mode. ---* This is a good suggestion. I need to run it on the /usr slice though. If you want to change this behaviour, you _could_ edit /etc/rc to change the default handling. From any shell, you should be able to mount filesystems readonly. When mounted readonly, you can safely run fsck. Use 'mount -r /mountpoint'. Many of your commands are not on the root filesystem, so you may need to mount (for example) /usr before you can execute certain commands. ---* Problem: here is the fstab: # DeviceMountpoint FStype Options Dump Pass# /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1f /tmpufs rw 2 2 /dev/ad0s1g /usrufs rw 2 2 ... When I get to the shell (via sysinstall), I do # fsck /dev/ad0s1g Can't stat /dev/ad0s1g: No such file or directory Can't stat /dev/ad0s1g: No such file or directory Why can I not see these disks? Is the device path something different. I guees the solaris equivalent of device to fsck. So there ...a more comprehensive summary :). I will be thankful for any help/suggestions. -ansh mail2web - Check your email from the web at http://mail2web.com
.Xdefaults
Hello, I'm using FreeBSD 5.1 and came across something today. Say I wanted to make xterms background by default i could add XTerm*background: black into my ~/.Xdefaults file and it would load by default. Where would I go about finding out more options for more programs to place them in my ~/.Xdefaults file? Thanks. -- FreeBSD 5.1-RELEASE (HAL) #0: Wed Jun 25 15:01:35 CDT 2003 .- O -..--. ,---. .-==-. /_-\'''/-_\ / / '' \ \ |,-.| /____\ |/ o) (o \|| | ')(' | | /,'-'.\ |/ (')(') \| \ ._. / \ \/ / {_/(') (')\_} \ __ / ,-_,,,_-. '=jf=' `. _ .','--__--'. / . \/\ /'-___-'\/:|\ (_) . (_) / \ / \ (_) :| (_) \_-'--/ (_)(_) (_)___(_) |___:|| \___/ || \___/ |_| ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Complete system restore software for FreeBSD?
I have used the Mondo Rescue backup and restore system before with my Linux machines with great success. What Mondo allows one to do is a complete system backup and restore from a bootable CD, meaning a system can survive a harddrive failure without a whole lot of fiddling around in reconfiguring software and such. What I'm wondering is, is there similar software available for FreeBSD (preferably free)? For reference, more info on Mondo Rescue can be found here: http://www.microwerks.net/~hugo/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
gdm2-2.4.1.3
hi, i have tried to set up the Gnome Desktop Manager on my freshly installed 4.8-STABLE box, but some errors refuse to disappear: error msg: gdm_config_parse: Authdir /usr/X11R6/share/gnome/gdm is not owned by user nobody, group gdm. Aborting. _ what i have already done: #pkg_info -L gdm2-2.4.1.3 /usr/X11R6/bin/gdm ... added this line in the group file in /etc/ gdm:*:11: same for passwd in /etc/ gdm:*:11:11:Gnome Desktop Manager:/usr/X11R6/etc/gdm:/sbin/nologin and set the entry in the /etc/ttys to /gdmon i couldn' manage to set the owner of the dir/files: (why?!) /usr/X11R6/etc/gdm/ drwxr-xr-x3 root gdm 512 May 29 18:47 gdm gdm.conf in /usr/X11R6/etc/gdm/ -rw-r--r-- 1 root gdm2628 May 31 10:20 gdm.conf #chown gdm .keep_me chown: gdm: illegal user name _ what am i doing wrong?! any help will be appreciated;-) thanx in advance *bsd-n00b ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-newbies To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
compiling and installing driver
Hi all, If I need to make a small change in a driver (for example the fxp driver). What is the way to compile only that driver and include the change on a running system? Thanks, -ansh mail2web - Check your email from the web at http://mail2web.com/ . ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
LPT1 Port in ASM or C
Hi all! I want to know how I can control the lpt1 port in asm or C. I'm a newbie. Any help would be greatly appreciated. Greetings Sebastian ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Burning Nero .bin images
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 27 Mar 2003, Daniela wrote: Hi! Can anyone tell me how I could burn the Nero .bin and .cue files (without installing Nero)? Is there a program (preferably a command line tool) to turn them into simple ISO images? Please help me. Thanks in advance. Daniela you should try 'cdrdao' a simple command line could look like: cdrdao write --device 0,0,0 --speed 12 toc-file.cue the disadvantage: it works only for SCSI devices. i think ti should also be possible to burn the bin-file directly with 'cdrecord' or 'burncd' if you now wich mode the file must be burned. you can find the required mode in the cue-file. i don't know if it really works, because i use 'cdrdao' joerg -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE+g0YaSPOsGF+KA+MRAqQwAKCExVrif2WiIZUOw6eYAMRJswwfNQCeObUV L+xkDABi2Bml0Dn4PZBOHs8= =Gb02 -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
tres urgent
jean philip Abidjan - Côte d'Ivoire TRES CONFIDENTIAL Je vous écris dans une confidentialité absolue, à partir de mon hotel temporaire à Abidjan, sous le conseil de ma mère. Premièrement, pour demander votre permission, assistance et coopération de transférer mes atouts cash de U$15 millions déposés sous la garde d'une compagnie de sécurité ici à Abidjan dans votre compte bancaire privé jusqu'à ce que ma famille arrive dans votre pays. Mon papa était responsable de la compagnie minière Diamand-Mining Compagny ( DDMC ) de l'ex. Zaïre jusqu'à ce que la junte militaire de Kabila prenne le pouvoir à partir d'un coup d'état dans mon pays, résultant en conflit armé entre les forces gouvernementales et les combattants rebelles. Dans cette situation, les industries, les maisons commerciales et les institutions financières étaient brûlées, contenant les documents officiels. En ce moment, mon papa était en possession de U$18 millions qui étaient déposés à partir du compte de la compagnie minière. Suivant la crise, j'ai transféré hors du Zaïre, plus précisément en Côte d'Ivoire, à travers l'aide de l'opérateur chalutier de pêche côtier où j'ai embarqué la boîte contenant de l'argent dans unecompagnie de sécurité privée pour des raisons de sécurité. La compagnie officielle de sécurité ne connaît pas le contenu exact de la boîte parce qu'étant déclaré comme objets ( biens familiaux ). Le certificat de mise en garde est établi en ma faveur, duquel je peux vous le faire disposer par des copies certifiées conformes sous votre demande. Pour finir, j'espère que vous m'assisterez sincèrement pour déplacer cet argent dans votre pays où je peux l'investir. Je payerai un pourcentage d'agrément de 15% de l'argent, comme commission pour m'avoir assisté. Aussi, je vous donnerai une commission de 5% pour couvrir chaque dépense que vous pourriez impliquer dans cette transaction. Je vous remercie pour votre compréhension et votre disponibilité, et que seigneur vous benis vous et votre famille Cordialement jean philip To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
wi0 problem with cardbus
hi, fist something about my sytem: Vendor: Fujitsu Siemens Model: Lifebook B2130 CPU: Intel Celeron 400MHz mobile Chipset: Intel 443MX RAM: 192M (64M builtin, 128M additional) HD: 20GB Network: Intel EtherExpress 100 Modem: Lucent LT Winmodem 56k PCMCIA: RL5C475 CardBus OS: FreeBSD 5.0-RELEASE-p4 the problem: i have two wireless nic's. one lucent-orinoco and one avaya. both cards should be supported by the wi driver. but if i insert these cards, i only get wi0 init failed (three times) and wi0 mac read failed (three times). here is a short excerpt of the logs: --- wi0: timeout in wi_cmd 0x; event status 0x8000 wi0: init failed wi0: init failed wi0: init failed wi0: timeout in wi_cmd 0x0021; event status 0x8000 wi0: timeout in wi_cmd 0x0021; event status 0x8000 wi0: mac read failed 5 wi0: mac read failed 5 wi0: mac read failed 5 device_probe_and_attach: wi0 attach failed 5 --- i searched with google but the only thing i found was the information, that init failed means, that the initialization of the card was not succesful. also i tried the debug sysctl switches, but it gives no information about this problem. i tried a non wireless nic with the same kernel and it works without problems. card was found and initialized without any errors. next i tried the wireless cards on a FreeBSD-4.7 system, and the init process there was succesful. now i've recompiled my kernel with an OLDCARD config style. and surprise, the cards are working, without problems. so i searched the docs, and the source, but there i found nothing about problems with the wi driver and NEWCARD. can anyone point me in the right direction to fix this problem, because i need the 32-bit cardbus support for other cards. thanks in advance regards Joerg To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
5.0-RELEASE under VMWare 3 : slowdown and even hangup
Hi there people And thanks for taking the time to read the flow of incoming questions on this list ;-) My question is a followup of the thread started by Michael Ritchie a couple weeks ago http://www.freebsd.org/cgi/getmsg.cgi? fetch=2417405+2419960+/usr/local/www/db/text/2003/freebsd- questions/20030126.freebsd-questions I'm kinda in the same situation : XP Pro, WMWare 3.2, several virtual machines running fine (linux,w2k), but the freebsd 5- RELEASE is quite a pain to use in this env. The guest OS keeps on slowing down, to the point that it's unusable. I'd say that after 30 minutes, it starts slowing down a lot. The installation process is quite risky in this matter. I launched a kernel compilation 15 hours ago. The system was already slow and ... the compilation is not over !! I see no process named idle (see the previous thread), but, having launched a top in another terminal, here's what I see : 0% user, 0% nice, 8.3% system, 91.7% interrupt !!! Now I can't do anything on this virtual machine. Not a ctrl-C, not even changing console. Kris Kenna talked about a kernel option for fix this. The problem would be related to a specific opcode emulation done by VMWare. Any help would be greatly appreciated, I just can't use 5.0 right now in this environnement. Thanks everyone Yvon Accédez au courrier électronique de La Poste : www.laposte.net ; 3615 LAPOSTENET (0,13 /mn) ; tél : 08 92 68 13 50 (0,34/mn) To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: 5.0-RELEASE under VMWare 3 : slowdown and even hangup
Hi there everyone At 10:51 AM +0100 2/13/03, [EMAIL PROTECTED] wrote: You will find an option called CPU_DISABLE_CMPXCHG I read that one and didn't read (my newbie fault) that it was so closely related to VMWare. I realize you then have the problem of how to compile the new kernel when it takes so long to do anything with the standard GENERIC kernel. Perhaps it would go better if you booted up in single-user mode, and then compiled and installed the new kernel. That's a good idea, even if I'm not sure single user would make a difference. I imagine that the same machine code is being called when doing a make depend, make, cc stuff. My short term method has been (all day long) to reboot the guest os from time to time (when things get slow, but before things get *BLOCKED*) and relaunch the build procedure. However, this is quite difficult and cumbersome to achieve. I, for sure, would have preferred a sysctl option if I understand that it is far too low level for this. In the end, compiling a new kernel on a non-VMWare host sounds interesting but might sound bizarre when using the VMWare-do- not-need-new-hardware-to-try-new-OS approach. My new kernel build is not over right now and I'll probably find it blocked tomorrow morning because of no reboot :( Thanks for your help anyway, and sorry for the RTFM glitch ;-) Yvon Accédez au courrier électronique de La Poste : www.laposte.net ; 3615 LAPOSTENET (0,13 /mn) ; tél : 08 92 68 13 50 (0,34/mn) To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
5.0 and Grub
hello..I am not sure if anyone came to any conclusions about this discussion. But I pass on the information that one of my systems happily dual boots redhat linux and FBSD 5.0 using Grub. I am, however, not using UFS2. -- Regards Cliff Sarginson The Netherlands [ This mail has been checked as virus-free ] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Help with IPF and IPNAT
Argh! I've been pulling my hair out trying to get my NAT gateway going. I have two interfaces, one external and internal, servicing a private LAN. From the LAN I can ping the internal interface and the external interface, but I can't get past the ext. interface. For testing my rules are pass in all and pass out all. From the gateway itself I can ping anywhere outside or inside. I have tried loading IPNAT and IPF as loadable kernel modules by adding the following to /etc/rc.conf: gateway_enable=YES network_interfaces=x10 dc0 lo0 ifconfig x10... ifconfig dc0... ipfilter_enable=YES ipfilter_rules=/etc/ipf.rules ipfilter_program=/sbin/ipf ipfilter_flags= ipnat_enable=YES ipnat_program=/sbin/ipnat ipnat_flags= Each interface is up and running. My default gateway in /etc/rc.conf is the gateway of the external NIC. Can anyone see anything wrong with what I am doing, or something missing? Do I need routed installed and running? I also tried forward_sourceroute=YES, but that didn't seem to help. Thanks, Adam Lofstedt mail2web - Check your email from the web at http://mail2web.com/ . To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Gesundheitsnetzwerk
Neways-World Wernerstr. 8 59387 AschebergTel. +492599 9299212 Fax. +492599 9299213 www.neways-world.com Der erfolgreiche Weg im Markt der Gesundheitsvorsorge In der Bevölkerung wächst das Gesundheitsbewusstsein stetig. Mehr und mehr Menschen/Verbraucher konzentrieren sich auf solche Produkte und Verfahren, deren Nutzung frei von Risiken ist, die stattdessen nachgewiesene gesundheitsförderliche und vitalitäts- steigernde Wirkung haben. Die Verantwortung für sich selbst, für die eigene Gesundheit übernehmen zu wollen, das ist ein immer öfter geäußertes Bekenntnis. Endlich gibt es, was Millionen Menschen suchen. Möchten Sie zukünftig weitere Informationen haben, registrieren Sie sich auf unserer Seite. www.neways-world.com Neways-World Wernerstr. 8 59387 AschebergTel. +492599 9299212 Fax. +492599 9299213 www.neways-world.com To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
FreeBSD Install question
I have an older laptop that doesn't have a bootable CD-ROM. The bay either holds a CD Module or a Floppy module so I can't boot off the floppies and install from the CD-ROM. I have installed a small DOS partition and can access my FreeBSD CD-ROM, is there any way to invoke the install from within DOS. (RedHat has a batch file on the CD-ROM that allows the installer to launch, is there anything I can use to do this for FreeBSD?) Is it possible to boot off the floppies, switch out the Floppy module for the CD module and then use the CD? Any help or ideas would be appreciated. Thanks Rich B To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
file desc bug
When the problem arised for the file descripters bug a while back (iosmash), i patched my box accordingly. (freebsd 4.4-release) Recently, the problem has re-arised and an exploit was released (iosmash2). I was wondering if there was a patch for this available, and if so, what do i need to do in order to patch it? Any information would be much appreciated. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
2 gateways - seperate routes for different ports?
Greetings, I currently have 2 gateway servers that I would like to consolidate. One is a permanent dialup with a static IP - this maintains DNS, routes my SMTP namespace and is relatively secured with IPFW. The other is a cable connection with a dynamic IP running NAT but unsecured because I havent figured out how to configure IPFW with a dynamic IP yet. I want to consolidate these 2 boxes, but I would need to route port 25 and 53 traffic through the dialup connection and everything else through the cable connection? I expect I should be able to do this with IPFW ? No? Any ideas / solutions appreciated. Cheers, Alek. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
YES, FREE MORTGAGE 4% QUOTES WITH NO CLOSING COSTS!
Below is a Heartfelt Crest Request. It was submitted by [EMAIL PROTECTED] ([EMAIL PROTECTED]) on Sunday, September 22, 2002 at 12:06:28 --- tst5: DONT GET A MORTGAGE UNTIL YOU READ THIS FIRST! Important information on mortgage rates. FREE INFORMATION AT THE LINK BELOW. a href=http://www.lendingmort.com;CLICK HERE FOR MORE INFORMATION/a b5 --- To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Compare Consórcio de Imóveis x SFH
1. CONSÓRCIO ADEMILAR x SISTEMA FINANCEIRO DE HABITAÇÃO -- | | CONSÓRCIO |SFH (1)| CONSÓRCIO |SFH (1)| | | ADEMILAR | | ADEMILAR | | -- | Valor do |R$ 50.000,00 | R$ 50.000,00 |R$ 50.000,00 | R$ 50.000,00 | | Crédito | | | | | -- | Número de| 100 | 100 | 180 | 180 | | Parcelas | Meses | Meses | Meses | Meses | -- | Prestação| R$ 567,50 | R$ 1.125,00 | R$ 354,25 | R$ 755,86 | | | | | | | -- | Valor Total |R$ 57.650,00 | R$ 112.500,00 |R$ 63.765,00 | R$ 136.054,80 | | Saldo Devedor| | | | | | (2) | | | | | -- | Percentual do| 15,30 % | 125,00 % | 27,53 % | 172,10 % | | saldo devedor| | | | | | sobre crédito| | | | | -- | Correção | CUB Mensal | TR + | CUB Mensal | TR + | | | (3) | 1% / Mês (4) | (3) | 1% / Mês (4) | -- Observação: Os números e valores deste demonstrativo são apenas um exemplo. (1) Caixa Econômica Federal, (2) Com base no valor da 1a. prestação, antes da correção de cada alternativa (3) Variação mensal utilizada pelo consórcio, (4) Variação utilizada pela CEF 2. CONSÓRCIO ADEMILAR a) A Ademilar se destaca no mercado por sua atuação pioneira no Estado do Paraná, especialista no segmento de consórcio imobiliário com o propósito de oferecer a melhor das alternativas ao mercado imobiliário; b) Foi a primeira no País a obter autorização junto ao Banco Central do Brasil para desenvolver suas atividades em regime de empresa Sociedade Anônima, com Certificado de Autorização nº 92060028; c) Esta em as cinco maiores administradoras de consórcio de imóveis do Brasil e conta com a confiança de mais de 3.000 famílias que receberam seus imóveis, num total de mais de R$ 100.000.000,00 em créditos entregues. 3. VANTAGENS DO CONSÓRCIO ADEMILAR a) Aquisição de imóveis Residenciais ou Comerciais (novos ou usados), Terrenos, Construção, Reforma e Ampliação (imóvel próprio), na Cidade, Praia e Campo; b) Equipar ou modernizar a sua micro-empresa, escritório ou consultório (imóvel próprio); c) Utilizar o FGTS como lance (Conforme normas da CEF); d) Quitar dívida junto ao Sistema Financeiro de Habitação; e) Sem necessidade de comprovação de renda; f) Liberdade para aquisição de um ou mais créditos mesmo possuindo outro imóvel, seja quitado ou financiado; g) As contemplações são mensais, uma por Sorteio pela Loteria Federal e outra por Lance; h) Possuímos várias cartas de Créditos com prazos diversos adequando ao seu orçamento familiar. 4. VANTAGENS DO INVESTIMENTO EM IMÓVEIS a) Dinheiro na mão é vendaval, já cantava Paulinho da Viola. O imóvel impõe excelente disciplina de poupar ao investidor; b) Os aluguéis podem oferecer um bom complemento na aposentadoria. Reinvestir os aluguéis recebidos através do consórcio impulsiona novas aquisições e torna-se uma alternativa às aplicações financeiras; c) Ótima proteção contra a inflação no médio e longo prazo; d) Viver no que é seu é algo que dá muito prazer; e) Comprar um imóvel proporciona uma sensação de vitória e tranqüilidade para você e sua família. 5. CONTATO Marisa Gasparim Rosa Assessora Comercial [EMAIL PROTECTED] www.ademilar.brturbo.com (41) 353-2850 / (41) 9994-6590 Curitiba - Paraná To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Symbolic Link Creating
Hi I am trying to work out how to symlink my log files from /var to /usr/var (?/usrvar/log/) as var is full.to create some space. Should I copy the logs across then make the link? How do I actually make the link? Do I make it for each file or can I do this for the whole directory?Both Link and symlink do not seem to work, although I can find no instructions/examples and the man seems light on detail. This is in FreeBSD Stable 4.0. With many thanks in advance. David Hingston MB ChB MBA _ [EMAIL PROTECTED] http://hingston.yi.org/ http://pcmc.yi.org/ If you seek a digitally signed response please advise. If you received a warning on reading this e-mail, please go to http://www.baycorpid.com/settings/email.asp?CA=healthcert to update your settings To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Compaq NC6134 Gigabit Ethernet NIC
sorry to send this twice but before i sent it w/out a subject. Its not in the hardware list but i was wondering if anyone has set up freebsd with a compaq nc6134 gigabit nic. the card currently resides on a red hat 7 server. Thanks, Jeff Butler To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message