Jonas Wueste schrieb:
The problem is that bconsole only can be run with root rights.
I want to transmit the querys result via nrpe to my nagios-server and
the nrpe user on the local machine has no root privileges.
So, is there a possibility to get the value without root privileges?
Change
Hi List :)
At this time, I have a few hairs left on my head...(I recall a few
e-mails claiming this was easy to do and ran fine)...evidently my
bacula-fu is weak...
I'm (still) running Bacula Version: 1.38.11 (28 June 2006) with a
single, external HP DLT IV VS80 40/80G drive. Platform is
Hi Arno,
thank you very much for your answer.
I will try asap the tests you are suggesting. By the way, I purged the
volumes involved in the error shown in the original message (it was the
third try), restarted the backup job and here is the (correct) result.
25-feb 19:55 bacula-dir: Start
Hello Kern,
thank you very much for this hint, but the volume size is already limited to
2GB.
Greetings
Sven Hendriks
Von: Kern Sibbald [EMAIL PROTECTED]
Gesendet: 26.02.07 19:37:24
An: bacula-users@lists.sourceforge.net
Betreff: Re: [Bacula-users] Bacula Restore keeps crashing with Block
hi all.
setting up my test system i ran into some problems with the FileSet.
first of all, it took me a while to figure out, that only the File
sections are used to calculate the hash of the FileSet.
since i decided (probably because of wron assumptions) that i would do
most of the generic
On Monday 26 February 2007 21:18, Arno Lehmann wrote:
I send this to -users and -devel because I don't know if the original
poster is on -devel where this belongs, IMO...
On 2/25/2007 3:43 AM, Dan Langille wrote:
On 25 Feb 2007 at 3:33, Florian Heigl wrote:
Just a silent heads up, if I
Check permissions on /dev/nst0.
Alfonso Amato - Sintecnos srl a écrit :
While setting up Bacula and following Brief Tutorial, I see a strange
problem: after the command run asking me for labelling the tape, I
give the command label, and bconsole gets lock for some 2 minutes,
than says:
Changed permission of /dev/nst0* into 660 and works correctly! I suggest
to add the chmod line into the Brief tutorial while testing not on
file but on real tape.
Thanks alot Adam!
Alfonso
Adam Cécile wrote:
Check permissions on /dev/nst0.
Alfonso Amato - Sintecnos srl a écrit :
While
Hi,
On 2/27/2007 9:04 AM, Ralf Gross wrote:
Jonas Wueste schrieb:
The problem is that bconsole only can be run with root rights.
I want to transmit the querys result via nrpe to my nagios-server and
the nrpe user on the local machine has no root privileges.
So, is there a possibility to get
Dear list,
I got a bacula setup with a number of tapes that are switched on a daily
basis during the week. During the weekend the same tape stays in. There
are about 11 tapes in the rotation (but this shouldn't matter).
The desired behaviour is that bacula should not demand other tapes and
On Monday 26 February 2007 22:11, Tim Schoellhammer wrote:
The answer was in
http://www.nabble.com/Slow-positioning-at-the-end-of-the-tape--tf2826338.ht
ml#a7909209
Now with:
Autochanger {
Name = MSL
Device = Drive-1, Drive-2
Changer Command = /usr/local/share/bacula/mtx-changer %c
On Tuesday 27 February 2007 09:54, Sven Hendriks wrote:
Hello Kern,
thank you very much for this hint, but the volume size is already limited
to 2GB.
Well, I don't think it is working correctly, because your output indicates
that Bacula is attempting to read at an address greater than
On Mon, 26 Feb 2007, Kern Sibbald wrote:
It looks to me like Samba shares don't support more that 2GB.
Incorrect. My CIFS servers are happily providing 1000+Gb shares.
It's certainly suboptimal for Bacula to be reading or writing to remote
shares though. Far better to put a samba-fd directly
On Mon, 26 Feb 2007, Rex Wheeler wrote:
Do you have the expertise to write something which can parse this
information or would it need to go on the Bacula wishlist?
I do have the expertise, but not sure about the time. It would be a
reasonable undertaking. It would involve:
1) Updating the
Hi,
I'm trying to set up bacula 2.0.2 to back up Windows XP (for testing,
later Win2k3 Server for production) to a NAS (supporting SMB) with no
success. The problem is to access the smb share with the storage daemon.
First I changed the account for the storage daemon / service to a local
Alfonso Amato - Sintecnos srl wrote:
Changed permission of /dev/nst0* into 660 and works correctly! I suggest
to add the chmod line into the Brief tutorial while testing not on
file but on real tape.
i rather suggest adding a line like make sure you do have the correct
permissions to
Hi Arno,
thanks for your comments. Please find my answers inline.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Arno Lehmann
Sent: Monday, February 26, 2007 8:44 PM
To: 'bacula-users'
Subject: Re: [Bacula-users] Mounting/Label question
Hi All,
Running a status dir command in bconsole essentially hangs the console.
I am running bacula-dir 2.0.1 on Centos 4.3 with a MySQL backend.
Having checked the MySQL database is approx 2.5G in size. Obviously
this is getting to be a little on the large size, so I have run dbcheck
and
Hi,
On 2/27/2007 3:24 PM, Andreas Lüdtke wrote:
Hi Arno,
thanks for your comments. Please find my answers inline.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Arno Lehmann
Sent: Monday, February 26, 2007 8:44 PM
To: 'bacula-users'
Subject:
Hi,
On 2/27/2007 3:37 PM, Chris Sarginson wrote:
Hi All,
Running a status dir command in bconsole essentially hangs the console.
That's ususally because there is some hard catalog work happening.
Simply wait...
I am running bacula-dir 2.0.1 on Centos 4.3 with a MySQL backend.
Having
Hi,
On 2/26/2007 10:01 PM, Oliver Lehmann wrote:
Arno Lehmann wrote:
Hi,
On 2/26/2007 4:32 PM, Oliver Lehmann wrote:
Hi,
my volumes are limited.
Always a bad thing...
I want to force bacula to do the scheduled type
of backup (incr, diff, full) and nothing different.
That should happen
OS: Windows 2003
Where can I enable debugging to determine why the wx-consle crashes so
frequently?
thanks,
brian
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kern Sibbald wrote:
On Tuesday 27 February 2007 09:54, Sven Hendriks wrote:
Hello Kern,
thank you very much for this hint, but the volume size is already limited
to 2GB.
Well, I don't think it is working correctly, because your output
For the archives...
A client contacted me with this error:
26-Feb 23:50 meson-dir: BackupCatalog.2007-02-26_23.10.00 Error:
Could not get Job Volume Parameters to update Bootstrap file.
ERR=sql_get.c:399 No volumes found for JobId=950
We reran the jobs. They ran fine.
We attributed the
Hello Arno,
It looks like the retention periods are set incorrectly since the Volume was
pruned while the job was running.
On Tuesday 27 February 2007 16:03, Arno Lehmann wrote:
Hi,
On 2/27/2007 3:24 PM, Andreas Lüdtke wrote:
Hi Arno,
thanks for your comments. Please find my answers
What is the procedure to follow when a tape is full? I have a tape drive with
40/80 DLT tape that fills up over 2-3 months. Then one night the tape gets
full, and the job running at the time is blocked. At this point, I unmount in
bconsole, physically eject the tape and put in a new or
Hi Guys,
The bacula startup script won't start the director, however typing
bacula-dir -c /etc/bacula/bacula-dir.conf works fine.
I tried putting this line into a script and running it:
/usr/sbin/bacula-dir -c /etc/bacula/bacula-dir.conf
It also didn't work...however, if I type it in the
In response to Beren [EMAIL PROTECTED]:
Hi Guys,
The bacula startup script won't start the director, however typing
bacula-dir -c /etc/bacula/bacula-dir.conf works fine.
I tried putting this line into a script and running it:
/usr/sbin/bacula-dir -c /etc/bacula/bacula-dir.conf
It
if you want to see kern in action !
http://ftp.belnet.be/mirrors/FOSDEM/2007/FOSDEM2007-Bacula.ogg
(you can use vlc to see this presentation
vlc http://ftp.belnet.be/mirrors/FOSDEM/2007/FOSDEM2007-Bacula.ogg)
bye
Le Lundi 26 Février 2007 18:36, Kern Sibbald a écrit :
On Friday 23 February
I agree and your position is true.
Can you tell me what method you have in mind for changing permissions? A
shell line inside /etc/init.d/bacula-sd.conf (I use Fedora) with the
chmod previously said or a different command?
Alfonso
IEM - network operating center wrote:
Alfonso Amato -
On Tuesday 27 February 2007 18:18, Eric Bollengier wrote:
if you want to see kern in action !
http://ftp.belnet.be/mirrors/FOSDEM/2007/FOSDEM2007-Bacula.ogg
Egads, what a horror! :-)
Every time I do a live demo, something goes wrong. What I forgot was that in
a certain sense, my whole
Arno Lehmann wrote:
Use the 'query' command in a Bacula console...
Choose a query (1-16): 3
Enter Client name: avocado-fd
+---++-+--+---+-++
| JobId | Client | StartTime | JobFiles | JobBytes |
Oliver Lehmann wrote:
[...]
Running Jobs:
JobId Level Name Status
==
534 Fullclient-avocado-files.2007-02-27_19.25.31 is waiting for Client
avocado-fd to connect to Storage File
[...]
Can you tell me what method you have in mind for changing permissions? A
shell line inside /etc/init.d/bacula-sd.conf (I use Fedora) with the
chmod previously said or a different command?
I suppose you're using a recent (2) version of fedora, so your system
should be running udev.
If that's
Hi,
On 2/27/2007 5:04 PM, Kern Sibbald wrote:
Hello Arno,
It looks like the retention periods are set incorrectly since the Volume was
pruned while the job was running.
Ah, ok... in that case, you should do an 'llist volume=...' (IIRC) with
the volume in question. And,of course, also
Hi,
On 2/27/2007 7:12 PM, Tim Schoellhammer wrote:
Kern Sibbald schrieb:
It is two times faster in recovery as the veritas backupexec.
Nice. Thanks for reporting that. It is always nice to be faster than the
big
guys :-)
By the way, I imagine you have done so, but please run a btape
In message [EMAIL PROTECTED] you wrote:
What is the procedure to follow when a tape is full? I have a tape drive with
40/80 DLT tape that fills up over 2-3 months. Then one night the tape gets
full, and the job running at the time is blocked. At this point, I unmount in
bconsole, physically
Hello everybody!
After getting some storages together at last I have a really bad problem
when I try to restore some files. As I got some Windows and some Linux
Servers to Backup I put them onto different storages and here comes the
problem:
I created the following job definition for the
You excuse to me, are new and sò not to write well in English. I
wish to use bacula with iomega rev loader. Someone has already tried, and it
knows to me to say if it works. Thanks
-
Take Surveys. Earn Cash. Influence
Hi All,
Running a status dir command in bconsole essentially hangs the console.
I am running bacula-dir 2.0.1 on Centos 4.3 with a MySQL backend.
Having checked the MySQL database is approx 2.5G in size. Obviously
this is getting to be a little on the large size, so I have run dbcheck
and
Hi Bill,
I tried the command... no help really :)
[EMAIL PROTECTED] bacula]# cat bacrestart
/etc/bacula/bacula restart
/usr/sbin/bacula-dir -c /etc/bacula/bacula-dir.conf
[EMAIL PROTECTED] bacula]# sh -x bacrestart
+ /etc/bacula/bacula restart
Stopping the Bacula File daemon
Stopping the
On 2/27/07, Nexus Seven [EMAIL PROTECTED] wrote:
What is the procedure to follow when a tape is full? I have a tape drive with
40/80 DLT tape that fills up over 2-3 months. Then one night the tape gets
full, and the job running at the time is blocked. At this point, I unmount in
bconsole,
Hello,
On 2/26/2007 7:46 PM, [EMAIL PROTECTED] wrote:
Hello everybody!
After getting some storages together at last I have a really bad problem
when I try to restore some files. As I got some Windows and some Linux
Servers to Backup I put them onto different storages and here comes the
Hello,
On 2/26/2007 10:35 PM, Schofar wrote:
You excuse to me, are new and sò not to write well in English.
We will manage :-)
Hopefully you can understand what we write because then tis list will be
most useful to you ;-)
I wish to
use bacula with iomega rev loader. Someone has already
Hi,
On 2/27/2007 6:07 PM, Beren Gamble wrote:
Hi Bill,
I tried the command... no help really :)
snip lots of stuff - debugging why the start script doesn't work
correctly in all cases
Which OS do you use, and where does the Bacula installation come from?
Packages, compiled yourself,
Arno Lehmann wrote:
Apart from that, you should examine the job 385 in more detail, and
compare with 534. I'm quite sure there must be a significant difference
- either the job name or the client are not identical, I think.
I don't have a running Bacula ready at the moment, but I *think*
Hi,
On 2/27/2007 9:17 PM, Oliver Lehmann wrote:
Arno Lehmann wrote:
Apart from that, you should examine the job 385 in more detail, and
compare with 534. I'm quite sure there must be a significant
difference - either the job name or the client are not identical, I
think.
I don't have
Oliver Lehmann schrieb:
Arno Lehmann wrote:
Apart from that, you should examine the job 385 in more detail, and
compare with 534. I'm quite sure there must be a significant difference
- either the job name or the client are not identical, I think.
I don't have a running Bacula
On Tuesday 27 February 2007 21:40, Arno Lehmann wrote:
Hi,
On 2/27/2007 9:17 PM, Oliver Lehmann wrote:
Arno Lehmann wrote:
Apart from that, you should examine the job 385 in more detail, and
compare with 534. I'm quite sure there must be a significant
difference - either the job name
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alan Brown wrote:
On Mon, 26 Feb 2007, Kern Sibbald wrote:
It looks to me like Samba shares don't support more that 2GB.
Incorrect. My CIFS servers are happily providing 1000+Gb shares.
It's certainly suboptimal for Bacula to be reading or
Hi
Recently I tested the patch that fix the bug 767 (see bugs.bacula.org). The
patch works fine - the restricted console is not able anymore to cancel
running jobs that not belongs to it.
With this occasion I tested other commands and I found few things which, in my
opinion, should be
Hi
Having 2 or more consoles opened to bacula directory, only one console gets
the messages. There is any way to send the messages to all opened consoles?
Any idea would be appreciated. Thanks.
Daniel
-
Take Surveys. Earn
I run the Bacula (v2.0.1) server on a Fedora Core 5 machine named
BACULA. When I boot this machine, only two of the three Bacula
daemons start. When I type service bacula status, I see the
bacula-dir daemon is stopped.
[EMAIL PROTECTED] /]# service bacula status
bacula-sd (pid 1858) is
usually a service in bacula doesn't start at boot because it is running
as the wrong user. While when you manually invoke it, it is running as
the correct user. Make sure the scripts being used to start the director
deamon have the correct permissions.
Jason
David Hatcher wrote:
I run the
First of all, we need to know what OS you are trying this on. Secondly,
when you create a script you need to tell the script which shell you
will be using in the first line of the script:
#!/bin/bash
or something like that. Take a look at some of your other shell scripts.
Also if you are
On Fedora 6, I have the following services (created by the RPM's):
bacula-dir
bacula-sd
bacula-fd
So, in my case, to set bacula-dir to start on boot:
# chkconfig bacula-dir on
This will set it to start automatically for several run levels (not sure off
the top of my head, but 3 and 5 for sure).
I just uploaded the rpm's built on SuSE 10.2 x86_64 (dual core) to
sourceforge.net
rpms-contrib-psheaffer
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to
Have a working Bacula install, and have been working on getting Bweb
running. Mostly it works, but a few parts do not. Commands like 'Jobs
/ Defined Jobs', and 'Current Jobs' from a clients list have problems --
there is a delay loading the page (30-40 seconds), and finally the page
(with no
58 matches
Mail list logo