Re: [Elecraft] KDVR3 + N1MM Help Needed

Hello Eric, The entries look ok. Maybe in N1MM you have "cq repeat" checked to be "on" AND the "Set CQ Repeat time" set to short. Try 10 secs or longer ... hope this helps. 73, Ad (pe1ftv) Op za 24 okt. 2020 om 15:38 schreef Jim McDonald : > Here's what I have: > > F1 CQ,{CATA1ASC SWT21;} > F2

Re: [Elecraft] KDVR3 + N1MM Help Needed

Here's what I have: F1 CQ,{CATA1ASC SWT21;} F2 Exch,{CATA1ASC SWT31;} F3 Thanks!,{CATA1ASC SWT35;} F4 {MYCALL},{CATA1ASC SWT39;} 73, Jim N7US -Original Message- Hi Bill, It looks just like this: F1 CQ,{CATA1ASC SWT21;}{CATA2ASC SWT21;} F2 Exch,{CATA1ASC SWT31;}{CATA2ASC SWT31;}

Re: [Elecraft] KDVR3 + N1MM Help Needed

Hi Bill, It looks just like this: F1 CQ,{CATA1ASC SWT21;}{CATA2ASC SWT21;} F2 Exch,{CATA1ASC SWT31;}{CATA2ASC SWT31;} F3 Thanks!,{CATA1ASC SWT35;}{CATA2ASC SWT35;} F4 {MYCALL},{CATA1ASC SWT39;}{CATA2ASC SWT39;} Only my call is in F1 M1, CQ is in F4 M4 73 Eric WD6DBM On Sat, Oct 24, 2020,

Re: [Elecraft] KDVR3 + N1MM Help Needed

More info? What does the function key file look like? Sent from my iPhone ...nr4c. bill > On Oct 24, 2020, at 6:44 AM, Eric Norris wrote: > > I'm using macros inside N1MM logger function keys (wicked cool), to play M1 > memory from the KDVR3, but no matter how I record my call on the KDVR3,

[Elecraft] KDVR3 + N1MM Help Needed

I'm using macros inside N1MM logger function keys (wicked cool), to play M1 memory from the KDVR3, but no matter how I record my call on the KDVR3, when played on an N1MM function call, I get something that sounds almost like a squelch tail. Any ideas on how to fix it? Thanks! 73 Eric WD6DBM

[Elecraft] KDVR3 - Some Website Confusion

Folks, When I go to the Elecraft site and search on KDVR3, I see the digital recorder board come up for $169. If I search on E850246 (which is the DVR board assy number), I am shown a K3DVR PCB for $365. If this is not a mistake, what’s the difference between these two boards? --Ed—

[Elecraft] KDVR3 "AF play" stucked

After recording for in excess of 90 seconds in my KDVR3/K3s, when I held "AF play" I repetedly got a message "end" that I could not get rid off for a while, even by turning the VFO B knob. Found no clue both in the manual nor the KE7X handbook. Finally after pushing a lot of DVR-related

[Elecraft] KDVR3 "AF play" stucked

After recording for in excess of 90 seconds in my KDVR3/K3s, when I held "AF play" I repetedly got a message "end" that I could not get rid off for a while, even by turning the VFO B knob. Found no clue both in the manual nor the KE7X handbook. Finally after pushing a lot of DVR-related

Re: [Elecraft] KDVR3 Question

Actually, that's the shortest route. But I'd use Line Out instead of Headphone jack. Sent from my iPhone ...nr4c. bill > On Sep 11, 2016, at 3:57 PM, Jim Larson wrote: > > The KDVR3 has the ability to capture the last 90 seconds of received audio. > Is there is a way

[Elecraft] KDVR3 Question

The KDVR3 has the ability to capture the last 90 seconds of received audio.  Is there is a way of exporting this audio to the PC?  I was hoping to find that capability in the K3 Utility, but didn’t see anything there.  I could capture it off of the headphone jack, running it through a audio to

[Elecraft] KDVR3 Accessing Memory Bank 2 from S/W

I read about 50 old posts and have not seen an answer to this question. I can activate M1 to M4 from my s/w (TRLinux) but cannot figure out a way to access M5 to M8. You wouldn't think this could be this difficult. I can switch to bank #2 but then cannot play the memory with one

[Elecraft] KDVR3

I recently purchased an Elecraft K3S with a KDVR3 voice recorder. Is there a way to activate the playback memories using Writelog? John KK9A aka P40A __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] KDVR3 message length variation

Ever since it arrived, my 5k serial number K3 has had eight voice memories which start counting down from 9 seconds when recording Ever since it arrived, my wifes earlier 3k serial number K3 has had eight voice memories which start counting down from 14 seconds when recording Today I had a

Re: [Elecraft] KDVR3 message length variation

Early KDVR3 boards had a larger memory, hence longer message lengths, IIRC. I forget when they switched to the newer, smaller memories. Bruce, N1RX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] KDVR3 message length variation

Hi Dave, I looked in the 2012 k3dvr manual , the only mention of the 8 message length is 1. Messages may be at least 10 seconds long. Whatever that means when translated! Exactly what is written there. ;-) 10 seconds guaranteed. If you see more, i.e. on older K3's, be happy, but no

Re: [Elecraft] KDVR3 message length variation

I have a K3 that is less than 6 months old (SN 82XX) that has 14 seconds in each of the 8 banks. Keith, XE3/K5ENS -- View this message in context: http://elecraft.365791.n2.nabble.com/KDVR3-message-length-variation-tp7595546p7595572.html Sent from the Elecraft mailing list archive at

[Elecraft] KDVR3 Memories from N1MM

Hi... Can memories 5-8 be keyed from N1MM Logger using the {CAT1ASC SWTxx;} macro command string? ...where xx is 21 for memory 1, 31 for memory 2, 35 for memory 3 and 39 for memory 4 I guess you have to hold the REC button to toggle between Bank 1 and Bank 2. Anybody know how to send a hold to

Re: [Elecraft] KDVR3 Memories from N1MM

Anybody know how to send a hold to the REC button to make the switch? From the K3 KX3 Programmers Reference E11 ... SWH37; 73, ... Joe, W4TV On 2/26/2014 2:17 PM, ray.fallen wrote: Hi... Can memories 5-8 be keyed from N1MM Logger using the {CAT1ASC SWTxx;} macro command string?

Re: [Elecraft] KDVR3 output level adjust for over the air playback?

Not yet. Many of us are hoping a future firmware update will address that. 73, Bruce, N1RX Playing with the KDVR3 and understand that tx audio processing has an effect on DVR recording playing back over the air. With my setup with mild compression and mild EQ'ing the ALC pins on playing a

Re: [Elecraft] KDVR3 output level adjust for over the air playback?

28, 2012 6:06 PM To: Bruce Beford Subject: Re: [Elecraft] KDVR3 output level adjust for over the air playback? I hope they can address it in firmware. Works well except over-the-air playbacks on rx are very hot in level Used it when we ran a special event station a few weeks ago and the dvr

[Elecraft] KDVR3 output level adjust for over the air playback?

Hi All, Playing with the KDVR3 and understand that tx audio processing has an effect on DVR recording playing back over the air. With my setup with mild compression and mild EQ'ing the ALC pins on playing a reciording over the air (recording someone and playing back over the air.). Is there a

Re: [Elecraft] KDVR3 Problem

I contacted Elecraft and they determined my KDVR3 was bad. A new one was sent and I installed it yesterday. DVR now working correctly! Thanks to Elecraft for excellent support. Dave wo2x -- View this message in context: http://elecraft.365791.n2.nabble.com/KDVR3-Problem-tp7466912p7508922.html

[Elecraft] KDVR3 Problem

My kdvr3 seems to not be working properly. It will record OK, but the playback sounds like a fluttering or motor boating sound coming in with the audio. On cw it sounds like a machine gun coming in with the notes. Anyone else experience this and how did you fix it? Toby W4CAK

[Elecraft] kdvr3 update

I got a email saying Elecraft shipped me nylon screws because it might have gone out with other ones. Does anyone know what this is or does? Thanks. -- View this message in context: http://elecraft.365791.n2.nabble.com/kdvr3-update-tp7400056p7400056.html Sent from the Elecraft mailing list

Re: [Elecraft] kdvr3 update

...@mailman.qth.net] On Behalf Of KC6CNN Sent: Friday, March 23, 2012 5:07 PM To: elecraft@mailman.qth.net Subject: [Elecraft] kdvr3 update I got a email saying Elecraft shipped me nylon screws because it might have gone out with other ones. Does anyone know what this is or does? Thanks. -- View this message

[Elecraft] KDVR3 audio problem

I recently noticed a crackling or motor boating sound on the recorded messages on my KDVR3. Has anyone experienced this problem and how did you correct it? Bill AF4B __ Elecraft mailing list Home:

[Elecraft] KDVR3 /command / macro question

Hello, I am using N1MM to playback stored M1 DVR message using the command: K31;SWT21; Happens that this command actually emulates pressing M1 at frontpanel instead of actually triggering KDVR3's memory #1. You may say: So? It works! But, if you have assigned some macro to these keys, this

[Elecraft] KDVR3 Sound Quality Problem

Gang, I installed a DVR3 recorder in my K3 a week or so ago and am very displeased with the quality of the recordings.There is a fluttering or motor-boating noise in the background that becomes louder with the recording of a voice. It is so bad that I will not put it out on the air. It is even

[Elecraft] KDVR3 Sound Quality Problem

： [Elecraft] KDVR3 Sound Quality Problem Gang, I installed a DVR3 recorder in my K3 a week or so ago and am very displeased with the quality of the recordings.There is a fluttering or motor-boating noise in the background that becomes louder with the recording of a voice. It is so bad that I

Re: [Elecraft] KDVR3 Sound Quality Problem

Hello Don, The KDVR3 will give faithful reproduction if you will clear your TXEQ of all settings and set them to zero. Your TXEQ is in the circuit when you rebroadcast the off-the-air recording. This means the rebroadcast signal is being shaped by whatever TXEQ settings you are using causing

[Elecraft] KDVR3 Operation Query

Dear Group, I have recently installed a brand new KDVR3 into my K3 (#4058). The K3 is loaded with the latest firmware upgrade.MCU 04.25, FPF 01.14, DSP1 02.71, DSP2 02.71 and DVR 01.04 In trying to understand the KDVR3 operation I have loaded 4 short voice messages and can recall them from

Re: [Elecraft] KDVR3 Wish List

Hi, i programmed a macro to do this and also switch to TX-mode, the 2nd macro restores my TX-EQ settings: Replay: TE+00+00+00+00-00+00+00+00;TX;SWH23; Restore settings: TE+10+16+03-04-04+02+13+13; Assigned it to PF1+2 73 Michael -- View this message in context:

[Elecraft] KDVR3 Wish List

I hope a fix is on the list to bypass the TXEQ when playing back an off-the-air recording. Roy Morris W4WFB Subject: Re: [Elecraft] About DVR To: Hector Padron ad4c2...@yahoo.com, elecraft@mailman.qth.net Message-ID: 4d39708c.6070...@gmail.com Content-Type: text/plain; charset=UTF-8;

Re: [Elecraft] KDVR3 Wish List

For now, a quick workaround is this: 1) Set up your data mode to be DATA A and the same sideband as you are using for voice. 2) When you wish to playback a recording off the air, tap mode down twice to get from SSB to DATA A. 3) Send the recording. 4) Tap mode up twice to get back to SSB.

Re: [Elecraft] KDVR3 Wish List

Don't you have to receive in DATA A as well in order to get RX equalizer out of the circuit? Or is that not in the recording loop? Guy On Fri, Jan 21, 2011 at 3:19 PM, Lyle Johnson k...@wavecable.com wrote: For now, a quick workaround is this: 1) Set up your data mode to be DATA A and the

Re: [Elecraft] KDVR3 Wish List

Yes, it is in the recording loop. The DVR records what you are hearing. If you have EQ other than flat, it is applied. Think of the DVR as a speaker, and as a microphone, and you can visualize where it in the the system. Note that the Rx EQ and Tx EQ are *not* separate filters, but are

Re: [Elecraft] KDVR3 Wish List

Lyle, That makes perfect sense to me. When you tell send someone what they sound like at your end it should sound like what you hear. When one is using an equalizer they should make sure when they send someone a sample of what they hear, they tell the recipient the recording was made post

Re: [Elecraft] KDVR3 Wish List

Except what you can do is to send back to the other end what was coming in off the air. If I ask someone to send my signal back to me what I am looking for is a mirror, not the other guy's personal speaker equalization. Tell him to transmit, switch to data A, record, send the recording back,

[Elecraft] KDVR3 not installed

Hi, I'm going through my option mod enables and all is well until I get to the KDVR3 voice recorder and the main tuning dial does not move the display off of not inSt. The KDVR3 is definitely physically installed, in fact this is the second one I've installed because the first one wasn't

[Elecraft] KDVR3

Hello Group, In my previous K3#46, the KDVR3 could record a message in M1-M4 well longer than 10 seconds per message.  Is my memory correct? I recently got a KDVR3 again for my latest K3.  However, each message M1-M4 is now restricted to 10 sec and not long enough to record 'cq cq cq vr2xmc

Re: [Elecraft] KDVR3

Hi Johnny, I do confirm with K3 #2730 and FW 4.22 that DVR record time is limited to ~10 seconds. I can't remember if the time constraint was larger in previous FW versions. Have you tried reverting to an older FW to see if the results differ? 73, James K2QI On Tue, Nov 30, 2010 at 10:33 AM,

Re: [Elecraft] KDVR3

Hello Johnny, It's 15 seconds on my K3 #266 with firmware 4.22. 73 to all Geoff G3UCK - Original Message - From: Johnny Siu vr2...@yahoo.com.hk Subject: [Elecraft] KDVR3 Hello Group, In my previous K3#46, the KDVR3 could record a message in M1-M4 well longer than 10 seconds per

Re: [Elecraft] KDVR3

15 sec on K3 #4123 with Firmware 4.22 GB 73 K5OAI Sam Morgan On 11/30/2010 11:13 AM, Geoffrey Downs wrote: Hello Johnny, It's 15 seconds on my K3 #266 with firmware 4.22. 73 to all Geoff G3UCK - Original Message - From: Johnny Siuvr2...@yahoo.com.hk Subject: [Elecraft] KDVR3

Re: [Elecraft] KDVR3

We use various flash memory ICs for the DVR, depending on availability. The target spec is 10 seconds per memory, and this is what is currently shipping. Some earlier DVRs do have a larger part that gives 15 seconds per memory, but we have not been able to get that part reliably. We'll

[Elecraft] KDVR3 - record time per message

@mailman.qth.net 傳送日期﹕ 2010/12/1 (三) 3:43:07 AM 主題： Re: [Elecraft] KDVR3 We use various flash memory ICs for the DVR, depending on  availability. The target spec is 10 seconds per memory, and this is  what is currently shipping. Some earlier DVRs do have a larger part  that gives 15 seconds per memory

[Elecraft] KDVR3

Hello I drop this on behalf of a friend of mine who’s not too good at English ! He has just installed a KDVR3 option on his K3. Recording is OK, but when he records his friends and sends them back the recording, they say it’s not good at all ! He does exactly what is said on the manual, and

Re: [Elecraft] KDVR3

Hi Jacques: The KDVR3 works very well on playback. If he is using FW ver 4.18 Beta, the problem is likely to be the firmware itself. 4.18 Beta version introduced some SSB bugs, and has been withdrawn from the website for now. Make sure your friend is using 4.14, which is the latest

[Elecraft] KDVR3 and Monitor

As I was using the DVR to playback messages, i thought that it would be nice to have a menu option that would turn on the monitor function to a desired level on play back of stored/pre-recorded, and recorded on-air audio from the KDVR3. I find myself playing back audio many times and forgetting

Re: [Elecraft] KDVR3 and Monitor

That is a great thought, Mike, and one that has been on the infamous list of software upgrades for many months. Each time an upgrade is released, several of us keep our fingers crossed that it includes the facility to temporary adjust the monitor to a preset level during retransmission of an

[Elecraft] KDVR3 Operation Question

I put the DVR into my radio for last year's SSB Nov Sweepstakes, and it worked great with N1MM. Finally got around to trying the RX Audio Record and Playback, and I'm not sure what is happening: 1. It records fine and will play back [so far only to the monitor], and VFO B scrolls around just

[Elecraft] KDVR3, wintest and Microkeyer II

Has anyone married the three of these so that the KDVR3 is used for voice memory rather than the MicroKeyer II. I prefer the KDVR3 to the MK II. It would be nice to be able to use the function keys to activate the KDVR3 while connected to MK II. I do not want to be connecting and disconnecting

Re: [Elecraft] KDVR3, wintest and Microkeyer II

It would be nice to be able to use the function keys to activate the KDVR3 while connected to MK II. I do not want to be connecting and disconnecting the MK II all the time I change from a CW to phone contest. What function keys? microKEYER II does not in any way effect operation

Re: [Elecraft] KDVR3, wintest and Microkeyer II

just fine using Control-O (callsign) on N1MM. -lu w4lt- K3 # 3192 Date: Tue, 1 Jun 2010 12:35:37 +0100 From: Doug Turnbull turnb...@net1.ie Subject: [Elecraft] KDVR3, wintest and Microkeyer II To: elecraft@mailman.qth.net Message-ID: 764fe0684e0747acb3d2c3a73c58b...@doug1 Content-Type: text

Re: [Elecraft] KDVR3, wintest and Microkeyer II

] On Behalf Of Lu Romero Sent: 01 June 2010 19:09 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR3, wintest and Microkeyer II Doug: Im curious... What are you connecting and disconnecting on your microKEYER II to switch from a CW to a Phone contest and why? Is this because you are using the KDVR3

Re: [Elecraft] KDVR3, wintest and Microkeyer II

: Joe Subich, W4TV [mailto:li...@subich.com] Sent: 01 June 2010 15:42 To: Doug Turnbull; Elecraft Reflector Subject: Re: [Elecraft] KDVR3, wintest and Microkeyer II It would be nice to be able to use the function keys to activate the KDVR3 while connected to MK II. I do not want

Re: [Elecraft] KDVR3, wintest and Microkeyer II

so much easier, and convenient, to do it within the computer (in a contest, when there is a computer available), ESPECIALLY with the MKII's built in sound card. -lu-w4lt- Message: 26 Date: Tue, 01 Jun 2010 10:42:11 -0400 From: Joe Subich, W4TV li...@subich.com Subject: Re: [Elecraft] KDVR3

[Elecraft] KDVR3 Voice recorder

Hello, I want to know about the digital voice recorder. If the avid contesters use it and how to use it in SO2R setup. I have a DXDoubler that I am installing right now. For SSB I use a MFJ-434 digital voice recorder with my notebook in the contests. So with a K3. How will be the setup

Re: [Elecraft] KDVR3 Voice recorder

Hi Jorge, Assuming you are using N1MM, you simply use macros to key the internal DVR in the K3. Thanks, Lee J. Imber WW2DX Sent from my iPhone On Dec 22, 2009, at 6:50 PM, Jorge Diez - CX6VM cx6vm.jo...@adinet.com.uy wrote: Hello, I want to know about the digital voice recorder. If

[Elecraft] KDVR3

Thanks guys. Turned up MON level. That did it. 73. John. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] KDVR3

Its supposedly on the list to have KDVR3 messages play at some reasonable level even if MON=0. That way you can hear when you play KDVR3 messages but not worry about feedback when you TX w/ a mic. ~BTH On Tue, 2009-11-03 at 15:36 -0800, John Adams wrote: Thanks guys. Turned up MON level.

[Elecraft] KDVR3

I've just installed the voice recorder. I can hear it in another rx but not through the K3 speaker. Is this normal? Thanks. John. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] KDVR3 with N1MM

On Thu, Sep 3, 2009 at 9:07 PM, Jeff Kinzli N6GQj...@n6gq.com wrote: Hi there, I'm wondering if I could find someone that's currently using the KDVR3 with N1MM - I have a few questions I'd like to bounce off you, and it can be off-list, or on-list. Specifically, how seamless is the integration

Re: [Elecraft] KDVR3 with N1MM

I have looked into using the K3 DVK with N1MM. It works, but I find that for me using wav files with N1MM is better. The main reason is that I can manipulate the wav files in a program such as Audacity to get rid of unwanted pauses etc. 73 Stewart G3RXQ On Thu, 3 Sep 2009 23:01:26 -0700, Iain

[Elecraft] KDVR3 with N1MM

Hi there, I'm wondering if I could find someone that's currently using the KDVR3 with N1MM - I have a few questions I'd like to bounce off you, and it can be off-list, or on-list. Specifically, how seamless is the integration with N1MM and what are the known issues (if any)? Thanks, Jeff N6GQ

[Elecraft] KDVR3 backorders

We have currently tried contacting all customers with KDVR3 backorders for 2008. If you ordered a KDVR3 PRIOR to Jan. 1, 2009 and have not received an email or phone call from Elecraft, please contact us a soon as possible. You may email account...@elecraft.com mailto:account...@elecraft.com

Re: [Elecraft] KDVR3

After a re-check of the DVR, I am able to continuously play a loop delay message. Not sure why it wasn't working before - it would stop after 5 or 6 cycles but appears to be fine now. I noticed that Wayne made some mention about PC programs that were polling the radio and causing the DVR to

[Elecraft] KDVR3

Hello all I'm really pleased with the KDVR3 option which I installed yesterday. It will be a great help for CQ Contest on a quiet band or when my voice needs a rest. I will have repeat set to 3 or 4 seconds and just sit back and wait for the calls to roll in ! However, there is one snag. When I

Re: [Elecraft] KDVR3

I've noticed the very same thing - PTT activation does not stop the DVR. Also, when you program a loop delay time, the message will not repeat indefinitely, it stops after 5 or 6 repetitions - seems like it should repeat forever until you interrupt it??? -- View this message in context:

Re: [Elecraft] KDVR3

Hi John, Thanks for the report. This will be corrected in a future firmware revision. 73, Wayne N6KR On Jan 8, 2009, at 1:04 AM, John Lemay wrote: When I do get a reply, I have to remember to cancel the DVR function by pressing - as the manual says - any switch besides M1 to M4. But -

Re: [Elecraft] KDVR3

Yea - there goes that great responsiveness again - I just love Elecraft. Great service as always. -- Write the bad things that are done to you in the sand, but write the good things that happen to you on a piece of marble. -Arabian wisdom On 8 Jan 2009, at 17:16, wayne burdick wrote: Hi

Re: [Elecraft] KDVR3

I too love the KDVR3 but I am still curious about the high level of drive the ALC indicator shows. Are you noticing this? Is it an issue? Is there a drive level adjustment accessible or is it set. I have received no audio playback complaints but the modulation seems overdone and does not vary the

Re: [Elecraft] KDVR3

Subject: Re: [Elecraft] KDVR3 I've noticed the very same thing - PTT activation does not stop the DVR. Also, when you program a loop delay time, the message will not repeat indefinitely, it stops after 5 or 6 repetitions - seems like it should repeat forever until you interrupt it??? -- View

Re: [Elecraft] KDVR3

...@mailman.qth.net] On Behalf Of K7VO Sent: 08 January 2009 18:01 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KDVR3 I too love the KDVR3 but I am still curious about the high level of drive the ALC indicator shows. Are you noticing this? Is it an issue? Is there a drive level adjustment accessible

[Elecraft] KDVR3 installed now no RF power

I installed the KDVR3 to #191 last night and it appears to work fine (enabled in Config) but I now have very little RF output when connected to a dummy load. The 100w PA doesn't appear to kick in when the power is increased above 12 watts and there is no power output showing on the meter at

RE: [Elecraft] KDVR3 installed now no RF power

To: elecraft@mailman.qth.net Subject: [Elecraft] KDVR3 installed now no RF power I installed the KDVR3 to #191 last night and it appears to work fine (enabled in Config) but I now have very little RF output when connected to a dummy load. The 100w PA doesn't appear to kick in when the power

RE: [Elecraft] KDVR3 installed now no RF power

You're sure that CONFIG:KPA3 is PA nor? Perhaps you changed CONFIG:KPA3 when you enabled the KDVR3? Dick, K6KR Yes, KPA3 is set to PA nor still can't figure out whats going on. Thanks for your reply though. 73 Roger MW0IDX K3 #191 K2 #2724 KX1 #416

[Elecraft] KDVR3, PR6 K3AFMDKT arrived

ParcelForce just delivered the above. I received all the other mod kits and the KRX3 earlier in the year. I guess it's time to dig out the ESD gear, practice some SMD work with my rework unit and get on and install everything. I've been squirrelling away all the mails about kit installs

Re: [Elecraft] KDVR3 Firmware request

Ed Gray W0SD wrote: Thanks Lyle! For me that is great news! I have another question on the KDVR3. If I am using PTT rather than VOX can I play a DVR message by tapping for example M1. Let me explain more. A long term problem with VHF contesting and using DVR on two meters and above is

Re: [Elecraft] KDVR3 Firmware request

Do I understand if I am in PTT (not VOX) and I hit M1 the DVR will transmit(actually act like it is on VOX although the K3 is set to PTT? What about if I have used PTT with a foot switch and keyed the K3 and the 8877 on two meters and the T/R relay in the amplifier has been switched can I tap

Re: [Elecraft] KDVR3 Firmware request

Ed Gray W0SD wrote: Do I understand if I am in PTT (not VOX) and I hit M1 the DVR will transmit(actually act like it is on VOX although the K3 is set to PTT? Yes, or at least mine does, and I want it that way. It's not really what I'd consider VOX, though - it's activated by pressing the

Re: [Elecraft] KDVR3 Firmware request

Maybe the answer for VHF amplifier use is to use some delay between when the K3 keys up before it puts out power and then on the DVR leave a little pause before starting to record, ie no audio should equal little power out on SSB if the background while recording is quite. Apparently the K3

Re: [Elecraft] KDVR3 Firmware request

Ed Gray W0SD wrote: Maybe the answer for VHF amplifier use is to use some delay between when the K3 keys up before it puts out power and then on the DVR leave a little pause before starting to record, ie no audio should equal little power out on SSB if the background while recording is

Re: [Elecraft] KDVR3 Firmware request

Guys, it is -IMHO- all the time the same like with activation of KEY OUT port by hitting the Key when on CW and pure PTT mode. This activation of PTT and RF Out my hitting M1 is much worse. Please, take in consideration that K3 can be part of very complex line where all PTT/RF OUT activity are

[Elecraft] KDVR3 not recording

Better subject. duplicate of K3DVR not recording. K3 #125 with KRX3 FW: uC 2.73, d1 1.98, d2 1.98, Fl 00.02, dr 00.05 Installed new DVR, Set Config:KDVR3 nor, cycled power several times. Using the information published in the MCU 2.72 release notes. The K3 is in USB mode When I tap REC then

Re: [Elecraft] KDVR3 not recording

John Buck wrote: Better subject. duplicate of K3DVR not recording. K3 #125 with KRX3 FW: uC 2.73, d1 1.98, d2 1.98, Fl 00.02, dr 00.05 Installed new DVR, Set Config:KDVR3 nor, cycled power several times. Using the information published in the MCU 2.72 release notes. The K3 is in USB mode

[Elecraft] KDVR3 Firmware request

First a little back ground as Wayne probably has not read the line-In + Mic discussion. When one uses the computer for a DVR for contesting an easy way to do it is to take advantage of the Line Input but given one also wants to use the mic for operating then the MIC is hot during the playing

Re: [Elecraft] KDVR3 Firmware request

thoughts to keep the issue in perspective. Dave Hachadorian, K6LL Yuma, AZ - Original Message - From: Ed Gray W0SD w...@triotel.net To: elecraft@mailman.qth.net Sent: Thursday, December 11, 2008 5:49 PM Subject: [Elecraft] KDVR3 Firmware request First a little back ground as Wayne probably

Re: [Elecraft] KDVR3 Firmware request

Another reason for this request is if I understand what I read that doing over the air recording would erase an existing message if the buffer is full. The 90-second record-off-the-air DVR loop buffer, and the eight DVR Tx message memory buffers, are completely separate. You can't erase a Tx

Re: [Elecraft] KDVR3 Firmware request

Thanks Lyle! For me that is great news! I have another question on the KDVR3. If I am using PTT rather than VOX can I play a DVR message by tapping for example M1. Let me explain more. A long term problem with VHF contesting and using DVR on two meters and above is hot switching the

[Elecraft] KDVR3 Installed and Running

The KDVR3 is working well in both receive audio recording and transmit voice recording. My first report on voice recording was that there was no difference between the recording and live audio. Be sure to cycle the K3 off after going to CONFIG: KDVR3 and switching it to NOR. Elecraft you

[Elecraft] KDVR3 delivery

Just received notification of KDVR3 shipping for K3 #900 ordered 26 Nov 2007. Pete Connors F5VNB/G4PLZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub

Re: [Elecraft] KDVR3

Brett, As I recall, that is in the plan, but not yet implemented. 73, Don W3FPR Brett Howard wrote: Deeply apologize if this has been covered but I've not seen it in the 10 or 15 messages I've read on this topic but can recorded audio be fed back out the TX pipe?

Re: [Elecraft] KDVR3

Yes. 73, Eric _..._ -Original Message- From: Brett Howard [EMAIL PROTECTED] Date: Monday, Dec 8, 2008 10:06 pm Subject: Re: [Elecraft] KDVR3 To: lyle johnson [EMAIL PROTECTED] CC: Reflector Elecraft Elecraft@mailman.qth.net Deeply apologize if this has been covered but I've not seen

[Elecraft] KDVR3 Received

My KDVR3 was delivered today, 12/8. A note was enclosed stating that firmware version 2.71 or the latest beta code was needed to get the full set of dvr features. Eric said on the reflector today that the KDVR3 WOULD NEED v. 2.71 FIRMWARE IN ORDER TO WORK, and this new download would be

Re: [Elecraft] KDVR3 Received

My KDVR3 was delivered today, 12/8. Mine arrived today too and has been installed in K3 #67 and functions (at least basically) with older firmware (MCU 2.67 / DSP 1.96). Only minor hick up was the missing Nylon standoff, which doesn't strike me as being a show stopper. vy 73 de toby

Re: [Elecraft] KDVR3 Received

during the installation. Merry Christmas and best 73, Roy W4WFB K3 #323 - Original Message - From: Toby Deinhardt [EMAIL PROTECTED] To: Roy Morris [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Monday, December 08, 2008 4:52 PM Subject: Re: [Elecraft] KDVR3 Received My KDVR3

Re: [Elecraft] KDVR3 Received

The new firmware will be up either late tonight or tomorrow. (Wayne and Lyle were in Aptos last night for our company holiday party (where did -all- those people come from?) and were up early this morning for an engineering planning meeting here. Both are on their way back to their respective

Re: [Elecraft] KDVR3

Deeply apologize if this has been covered but I've not seen it in the 10 or 15 messages I've read on this topic but can recorded audio be fed back out the TX pipe? On Sun, 2008-12-07 at 12:49 -0800, lyle johnson wrote: 1.How many seconds of recording. TX MEMORIES Each transmit memory

[Elecraft] KDVR3

G'day, Maybe I'm blind but I cannot find much information on the utility of the KDVR3. There doesn't seem to be any published specifications. The last page of the installation manual refers you to detailed instructions for using your digital voice recorder are included throughout the K3

Re: [Elecraft] KDVR3

1.How many seconds of recording. TX MEMORIES Each transmit memory is up to 15 seconds in length. There are eight (8) memories, arranged as two (2) banks of four (4), just like the CW and Data memories. RX MEMORY There is a 90 second endless loop. New recordings are appended to the

  1   2   >