Hello elecrafter,
I am thinking operating my KX3 in my Tesla and have some questions:
1. Is it ok to direct drain DC supply from the cigarette lighter socket since
there is no ignition system in the Tesla?
2. The body of Tesla is aluminium alloy (if I am correct. How can I ground a
mobile
Old ham lingo, meaning "fine business." A synonym might be A-OK or just plain
excellent! ;-)
Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
c...@n8vz.com
www.n8vz.com
EM89wh
IRLP 4533 Echolink 116070
PSK and JT65 Forever!
Check p50 of the Owner's Manual, or alternatively, search for
"Miscellaneous Setup" and read down from there, under the Mic Gain /
Bias heading.
73,
matt W6NIA
On 10/18/2016 7:04 PM, Carl Jón Denbow wrote:
I need some help setting up a Heil Pro 7 with my K3s. I have the physical
Got an interesting anomaly with KAT500 #007
Without making any changes to settings, cables, movement of equipment,
AuxBus or RS232 cables etc, it now has stopped "following" on QSY.
Band changes are working, first Dit will set tune to stored memory, checked
the KAT500 utility, boxes for QSY/Tune
Ron,
Interesting you bring this up as the KL7RA (sk) super contest station
had acoustic tile on the ceiling in the room with six contest
stations. I noticed immediately how nice voice sounded without echos
off hard surfaces. Floor was carpeted.
When I build my new ham 18x26 foot shack I am
1. W4ATK seems overly indignant about a "compliance" spec he doesn't
even understand.
2. And while I've been a bit chagrined about it myself in the past,
anybody who doesn't understand that Elecraft's chosen business model is
centered around portable gear (which includes motor home and
This is an interesting thread but I wonder about the practicalities... Of
course we all want to emit a clean signal.
In which cases might the IMD be a problem? Running full power off a battery
with voltage dropping?
Running almost full power to drive an older type tube amp?
How fast does IMD
On 10/17/2016 8:48 PM, Guy Olinger K2AV wrote:
What would be a practical way to actually introduce such a change? Lay out
all the specifics involved. Let's see your critical path item by item plan.
It's cheep and easy to just blurt out "they oughta go to 28 volts."
Provide an *optional* 28V
Since June, my K3 went out for the California QSO Party (CQP), a
special event station from Ely NV, and field day. Field day and
CQP were solar powered battery. The Ely event ended up being
battery because the generator was putting out S9 noise. The
field day was QRP while CQP and Ely were at
Hi,
beware of purchasing the IF Crystal filters on eBay...
http://www.ebay.com/itm/500Hz-CW-Crystal-Filter-for-Elecraft-K3-with-8-crystals-/172338045381?hash=item282025e1c5:g:u4MAAOSwGtRX1PVT
Hi,
It looks like I missed two of them last week because of my sickness (w/o an
internet connection)... :)
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-WTB-KAT500-tp7623456p7623497.html
Sent from the Elecraft
Latest firmware installed
Thanks, Irwin KD3TB
On Monday, October 17, 2016, Guy Olinger K2AV wrote:
> I do not have this problem, and I have P3/SVGA. Do you have all the latest
> production firmware? Or have you installed a beta?
>
> 73, Guy K2AV
>
> On Mon, Oct 17, 2016 at
Admittedly a neophyte in learning the ins and outs of writing macros so
forgive if this question has already been addressed.
I am trying to place macros in the P3 SVGA memories and have run into
the problem that appears the K3 response time for doing band changes is
preventing the ability to
I like the size and weight of K3 also. K3 fits right underneath the seat in
front of you as a carry on, and K3 is as good or better than an Orion or
FT-5000 that will not fit in there, hi! What other contest radio can do this?
Elecraft K2/100. Yes, you can build it with the separate
If the serial number is 10939 or greater, the change has already been
installed.
At slightly lower serial numbers (10852 and above) it may or may not
have been installed - it depends on whether it is a kit or factory
assembly and whether it is a K3S/10 or K3S/100.
If you are in the
We sent an earlier posting showing which serial numbers already had the new
upgrades:
KPA3A upgrade incorporated starting with serial number:
Factory assembled: s/n 10852
Kit:s/n 10864
LPA module upgrade incorporated starting with serial number:
Is this there a SN after which these upgrades are automatically included in
all K3S's?
On Mon, Oct 17, 2016 at 10:56 PM, Jan Erik Holm wrote:
> Wayne,
>
> Is there a way to do this " at home" ? Since I´m in Sweden
> it might not be practical to send the radio all the way to
>
Elecraft K3 HF/6 meters 100 watts with:
KAT3A Internal ATU with 2nd Ant. Jack,
KRX3A High Performance Subreceiver ,
KTCXO3-1 TCXO 1 PPM (0.5 typical),
KSYN3A Synthesizer Main , KSYN3A Second Synthesizer SUB ,
KXV3A RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface ,
KFL3A-250 ,KFL3A-400 ,
Like Bill, I operate with several other hams for Field Day, CQP, 7QP
(7th Area QSO Party), and VHF grid trips. Field Day is a single K3 for
HF and a KX3 for the VHF station. We run 1A battery/solar. CQP and 7QP
are multi-transmitter, K3/P3SVGA/KPA500 and run from Honda 2000i
generators. These
>
> K2 transceiver with 100 watt PA, Auto antenna tuner, Advance DSP bd, SSB bd,
> also has audio mods for gain and 2.6khz BW, Clifton lab Z1000 IF buffer amp
> with IF output jack, PLL bd for 600hz offset/spot, and finger dimple.
> Excellent condition, sat on desktop. Serial number 3657.
On Tue,10/18/2016 3:43 AM, Yngvi (TF3Y) wrote:
How fast does IMD deteriorate with increased power from the K3S or K3?
What are the IMD figures when running 20-25W driving a linear amp. such as
the KPA500?
I've looked carefully at this, and so has my neighbor Bob Wolbert, K6XX,
who is an
Mine does this too, but only when displaying decoded text. I have to adjust it
every time.
> On Oct 18, 2016, at 11:01 AM, Irwin Darack wrote:
>
> Latest firmware installed
>
> Thanks, Irwin KD3TB
>
>> On Monday, October 17, 2016, Guy Olinger K2AV
On Tue,10/18/2016 2:04 AM, Edward R Cole wrote:
Interesting you bring this up as the KL7RA (sk) super contest station
had acoustic tile on the ceiling in the room with six contest
stations. I noticed immediately how nice voice sounded without echos
off hard surfaces. Floor was carpeted.
Hi Jim - The 17 m harmonic problem was limited to the single review unit, which
we corrected. All others shipped were/are OK on 17M.
73,
Eric
/elecraft.com/
On 10/18/2016 11:38 AM, Jim Rogers wrote:
To all who responded, certainly my friend Don and others
"During initial testing, we
To all who responded, certainly my friend Don and others
"During initial testing, we found that the second harmonic on 17 meters
measured 42 dB below the fundamental, well below the specified >50 dB we
measured on the other bands. We returned the transceiver to Elecraft for
repair and
Many thanks for sharing this Jim.
Very ambitious and informative.
73, Yngvi TF3Y
On Tue, Oct 18, 2016 at 5:51 PM, Jim Brown
wrote:
> On Tue,10/18/2016 3:43 AM, Yngvi (TF3Y) wrote:
>
>> How fast does IMD deteriorate with increased power from the K3S or K3?
>>
>>
I have received a response to my posts from Eric and understand that the
17M harmonic problem I was concerned about was limited to the test unit
supplied to ARRL.
I am a happy camper!
Jim, W4ATK
__
Elecraft mailing list
Home:
What method(s) did you use to verify the accuracy of your dB(c) numbers? I get
a little queasy when I see "-48.5 dBc."
On 10/18/2016 10:51 AM, Jim Brown wrote:
On Tue,10/18/2016 3:43 AM, Yngvi (TF3Y) wrote:
How fast does IMD deteriorate with increased power from the K3S or K3?
What are the
P3 Firmware installed:
MCU = 1.60
SVGA=1.34
FPGA 0-4 = 1.04
I figured out the problem. When SVGA Data is turned on, the SVGA setting on
the P3 does not remember the SVGA P3 Waterfall Height. When SVGA is turned
off, it remembers the original SVGA Waterfall Height setting. This may
have
Hi Eric,
Just curious/devils advocate question. Was this unit that was reviewed, picked
at random from stock at Elecraft? If so, or not, wouldn't it's performance be
reflective of a population of other units manufactured? Just curious how you
can say all others shipped were/are OK on 17, when
On 10/17/2016 9:47 PM, Walter Underwood wrote:
> In general, good hi-fi reproducers should be good communications reproducers.
I tried using a consumer-grade "hi-fi" speaker in a VHF/UHF mobile
installation and the highs drove me crazy. Pulled out the original
Motorola limited-range speaker
Hi Irwin,
Looks like you found a bug. But as a work around I would suggest setting
the SVGA waterfall height to operate on its own, independent of the P3's
waterfall height. To do that, press the MENU button on the front of the P3
and using the encoder, select SVGA Menu. Then select 'WfEn'
Steve,
Just another data point ...
My PX3 exhibits the same behavior in a system that includes the KXPA100. I
see it happen when I twist the KX3's OFS knob to quickly QSY. However, if
I turn OFF the the KXPA100 via the KX3 "PA MODE" menu option, the PX3
responds immediately to a twist of the KX3
Hi Gene,
The K3S was definitely a random production unit. The failure was quite unusual
as it was an intermittent solder connection in that particular LPF. We rarely
see that in this area on our professionally assembled and inspected boards. It
must have been intermittent as it passed our
Have for sale the KX3 line, all in a Pelican case
Options: Roofing Filter, Hand Mike, AT in the amplifier and cables
Nice condition ~ contact-of-line please ~ emuprof AT yahoo DOT com
Cheers, Jan K1ND
__
Elecraft mailing list
Home:
The data is accumulated peaks for 30-40 seconds. Reference for dBC is
the peak of the waveform. That terminology is not appropriate, of
course, for the SSB data.
73, Jim
On Tue,10/18/2016 12:53 PM, Wes Stewart wrote:
What method(s) did you use to verify the accuracy of your dB(c)
numbers? I
That's harmonics which the FCC regulates to -43 dBc or better, better
being a bigger number, on 160-10m, and -60dBc for 6 meters and up. That
number IS regulated.
That is not the same as two tone TX IMD which is specified by Elecraft
as around -30dB, and NOT regulated by the FCC, because most
It certainly left the factory working on 17 meters, because we do a 100% test
on all bands for TX harmonic suppression. My working theory is that the unit
was damaged in shipping. We may never know.
73,
Wayne
N6KR
On Oct 18, 2016, at 2:51 PM, n...@comcast.net wrote:
> Hi Eric,
> Just
And by the way, it *was* picked at random, in effect; we had no idea who
purchased the unit, or when, until the ARRL gave us their first set of numbers.
73,
Wayne
N6KR
On Oct 18, 2016, at 2:51 PM, n...@comcast.net wrote:
> Hi Eric,
> Just curious/devils advocate question. Was this unit that
I have seen a similar issue with my PX3 but it may not be the same or it
may be related to the root of the problem.
What I notice is what "in the old days" would be switch bounce. What I
notice (like you) is when I turn the knob fast the value bounces around
but doesn't go anywhere. I find
I need some help setting up a Heil Pro 7 with my K3s. I have the physical
connection to the back of the rIg OK. I'm hearing through the earphones FB.
However, on TX I'm getting very little modulation. If someone else on this
reflector has made this setup, I'd appreciate them sharing their
The official response I got from the factory is that to have any of the IMD
mods done, the radio needs to be sent in to the factory.
Bill N0CU
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3S-QST-Article-tp7623462p7623522.html
Sent from the Elecraft mailing list
You didn't answer the question.
On 10/18/2016 4:47 PM, Jim Brown wrote:
The data is accumulated peaks for 30-40 seconds. Reference for dBC is the peak
of the waveform. That terminology is not appropriate, of course, for the SSB
data.
73, Jim
On Tue,10/18/2016 12:53 PM, Wes Stewart wrote:
43 matches
Mail list logo