Forum (emc-p...@ieee.org)
Subject: Re: LVD and US Safety Workplace Requirements for products.
Ian
IEC / EN61010 is harmonized with UL/CSA 61010. Make sure all critical
components are also certified for North America
Best Regards
Peter Merguerian
Go Global Compliance Inc.
(408) 416
, June 28, 2011 10:37 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] LVD and US Safety Workplace Requirements for products.
Agree with all so far, but the question also asked how hard would it be. The
CB report works both directions, and unless something really unusual I don’t
think the effort
, not an
intentional radiator and the right limits are used as will Canada and other
than marking. I’m not sure how many of the main safety organizations in the
US are also NB’s and can accept the CB report, and then verify the national
differences, but UL, CSA and TUV are. The others may be and I don’t mean
Safety and Health Administration (OSHA) NRTL programme.
As l understand it, it comes under 29 CFR 1910 Subpart S which draws at
least some of it’s requirements from NFPA 70E Electrical safety Requirements.
Question.
Would a product which
, 2011 1:52 AM
To: IEEE Forum (emc-p...@ieee.org)
Subject: LVD and US Safety Workplace Requirements for products.
We are thinking of having a electronic product approved for the USA market. It
has all the required CE marking approvals of LVD and EMC. This product would
be used
We are thinking of having a electronic product approved for the USA market. It
has all the required CE marking approvals of LVD and EMC. This product would
be used in the workplace and l would think comes under Occupational Safety and
Health Administration (OSHA) NRTL programme.
As l
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting tomorrow, June 22nd, at the Holiday Inn, Boxborough
MA. A social hour with light refreshments will begin at 7:00 PM and the
technical meeting will start at 7:30 PM. Anton (Tony
@LISTSERV.IEEE.ORG
Subject: Australia, electrical safety approval query
In Australia for an external power supply, does an SAA safety approval satisfy
the requirements of electrical safety approval from an electrical power
authority (such as Victoria’s Energy Safe)? If so and if there is a web
a weblink.
Regards
Barry Esmore
AUS-TICK
281 Lawrence Rd
Mount Waverley
Vic 3149
Australia
Ph: +613 9886 1345
Fax: +613 9013 9552
From: Ron Pickard mailto:rpick...@hypercom.com
Sent: Tuesday, June 21, 2011 10:05 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Australia, electrical safety approval query
of receiving this material or for any
consequence of its use.
From: Ron Pickard [mailto:rpick...@hypercom.com]
Sent: Tuesday, 21 June 2011 10:05 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Australia, electrical safety approval query
In Australia for an external power supply, does an SAA safety
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Ron Pickard
Sent: Monday, June 20, 2011 5:05 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Australia, electrical safety approval query
In Australia for an external power supply, does an SAA safety approval
satisfy
In Australia for an external power supply, does an SAA safety approval satisfy
the requirements of electrical safety approval from an electrical power
authority (such as Victoria’s Energy Safe)? If so and if there is a web
reference (preferably not SAA’s, please provide a weblink to that reference
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, June 22nd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Anton (Tony
and implemented unified framework for toy
safety. The GCC version of the Low Voltage Directive has been adopted and is
in the process of being implemented. Other categories, such as machinery, are
still being worked on. The UAE, as a member of the GCC, will likely be
adopting the new electrical safety
NIST recently hosted a workshop on Gulf Cooperation Council (GCC) product
regulations. The GCC has adopted and implemented unified framework for toy
safety. The GCC version of the Low Voltage Directive has been adopted and is
in the process of being implemented. Other categories
The product safety regulatory function in Abu Dhabi was very recently started.
The last I heard, they were establishing a national lab and intend to
harmonize with IEC standards. The controling organization is the 'Abu Dhabi
Quality and Conformity Council'.
As for stds like 950 and 601, I have
Peter,
What sort of commercial electronic equipment? Where is it used?
Scott
On 5/16/2011 7:11 PM, peperkin...@cs.com wrote:
PSNet,
Looking for applicable technical safety regulatory requirements for
commercial electronic equipment for Abu Dabi - UAE.
Thanx for your help
PSNet,
Looking for applicable technical safety regulatory requirements
for
commercial electronic equipment for Abu Dabi - UAE.
Thanx for your help in advance.
Peter E Perkins, PE
PO Box 23427
Tigard, ORe 97281-3427
503/452-1201 fone/fax
p.perk...@ieee.org
'
Subject: NFPA and safety engineering labs
The fire inspector did the audit for the final occupancy
cert. He was young and dumb; said that my safety test lab is
unsafe, and that what I do results in a hazardous work
environment - doh [face-palm].
I said that NFPA70E article 130
having fun with it.
The Other Brian
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Brian O'Connell
Sent: Wednesday, May 11, 2011 2:37 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: NFPA and safety engineering labs
The fire inspector did the audit
The fire inspector did the audit for the final occupancy cert. He was young
and dumb; said that my safety test lab is unsafe, and that what I do results
in a hazardous work environment - doh [face-palm].
I said that NFPA70E article 130 covers this because only qualified people are
allowed
at that link and send a copy of your resume to
bbr...@cisco.com.
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc
and his topic will follow in later meeting notices.
If you or anyone you know would like to give a product safety technical
presentation, please contact Steve Brody by email at steven.br...@brooks.com
mailto:steven.br...@brooks.com . A technical presentation should be 45 to
60 minutes in duration
In message
of5c4b19d1.9cdd3905-on86257868.006ff8fe-86257868.0070b...@amat.com,
dated Mon, 4 Apr 2011, lauren_cr...@amat.com writes:
Is EUR ING a significant feather to have in one's cap for Europe?
It's not a safety certification. Professional qualifications are very
different between USA
Does anyone know of a website with an opinion ranking for general safety
certifications based on impact/reputation?
For example, is it more meaningful to have PE or CSP or iNARTE PSE as a
credential. Is EUR ING a significant feather to have in one's cap for Europe?
Perhaps a more equitable way
Group,
I need a Safety Expert with tangible experience working with the city of Los
Angeles as the AHJ with regards to an electrical safety installation issue.
This would be a consulting opportunity to resolve a specific issue and most
likely would require short term travel to the Los Angeles
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting tomorrow, March 23rd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Jeff Goldsmith
The 2011 UKRI Product Safety Workshop scheduled for 26-Mar-2011 at the Jurys
Inn Croydon hotel is cancelled for lack of registrations.
Thank you for your contributions to getting ready for this event, and my
apologies for any inconvenience this may cause you.
Anyone registered for the event
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting next Wednesday, March 23rd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Jeff
)
Sent: Thursday, March 03, 2011 11:56 AM
To: emc-p...@ieee.org
Subject: RE: Contract Position for Product Safety Engineer at Cisco Systems in
Boxborough, MA
My apologies for the typo in my email address.
Its bbr...@cisco.com
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf
Due to lab expansion, we have 3 positions available for an electrical engineer
and technicians at our Castle Hill, Sydney facility.
The electrical engineering position involves working with other electrical
testing engineers in performing testing to Australian and International
electrical safety
Burglary, fire resistance, got it!
Thanks Ken Ted.
Jim
From: IBM Ken [mailto:ibm...@gmail.com]
Sent: Friday, March 11, 2011 4:14 PM
To: Ted Eckert
Cc: Jim Hulbert; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: Safety Standard for a Drop Box?
Most of the Standards are for electronic
The opinions expressed are my own and do not necessarily reflect those
of my
employer.
From: Jim Hulbert [mailto:jim.hulb...@pb.com]
Sent: Friday, March 11, 2011 11:48 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Safety Standard
Thanks Ted. I'll have to check into the application to see if fire
containment or protection is desireable.
Jim
From: Ted Eckert [mailto:ted.eck...@microsoft.com]
Sent: Friday, March 11, 2011 4:04 PM
To: Jim Hulbert; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: Safety Standard for a Drop Box
employer.
From: Jim Hulbert [mailto:jim.hulb...@pb.com]
Sent: Friday, March 11, 2011 11:48 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Safety Standard for a Drop Box?
Does anyone know of a UL safety standard that would apply to a free-standing
drop box (similar to a USPS mailbox
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, March 23rd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Jeff Goldsmith
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, March 23rd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Jeff Goldsmith
2011 UKRI Workshop -- Sponsored by the PSES and UKRI Section
26-March-2011, 8:30-17:30
Location
Jurys Inn Croydon Hotel,
Wellesley Road,
Croydon, South London, Croydon, CR0 9XY
Tel: +44 20 8448 6000
Fax: +44 20 8448 6111
Technical Program
Come to the first UKRI Product Safety Engineering
My apologies for the typo in my email address.
Its bbr...@cisco.com
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Brian Brady
(bbrady)
Sent: Thursday, March 03, 2011 10:36 AM
To: emc-p...@ieee.org
Subject: Contract Position for Product Safety Engineer at Cisco Systems
We have a contract position available for a product safety engineer available
in Boxborough, MA:
Details:
Product Safety Engineer
Responsibility
·Obtain safety approvals for all chassis and safety critical
interfaces. Obtaining the approvals may entail obtaining proof
...@ieee.org
Subject: Re: Safety standard EN 60065:2002 and A2:2010 amendment
Everyone
From the public section of the CENELEC website,
http://www.cenelec.eu/Cenelec/Homepage.htm if you put “60065” into the top
right hand search box and click “search”, then click on the appropriate
amendment
).
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://product-compliance.oc.ieee.org/
Graphics (in well
14:19
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: Safety standard EN 60065:2002 and A2:2010 amendment
In message
bf5f91292ee1b546aa6b6234356ef8953a91af8...@si-mbx02.de.bosch.com,
dated Wed, 2 Mar 2011, Mobers Jan (ST-VS/ENG1)
jan.mob...@nl.bosch.com writes:
A safety test house
-VS/ENG1)
Sent: 02 March 2011 12:30
To: emc-pstc
Subject: Safety standard EN 60065:2002 and A2:2010 amendment
Hi All,
A safety test house informed me that there was an A2:2010 amendment to the
EN60065:2002 safety standard.
Searching with the famous Google give only drafts for the Austria and UK
Hi All,
A safety test house informed me that there was an A2:2010 amendment to the
EN60065:2002 safety standard.
Searching with the famous Google give only drafts for the Austria and UK.
Also in the latest EU official journal I see no reference mentioned.
Who can give me more detailed
for the GCC single
market; 2) GCC Product Safety Directive; 3) GCC Low Voltage Directive; and the
4) GCC Toy Directive.
On the afternoon of Monday, March 21, at NIST in Gaithersburg, MD, there will
be a general session on regulation, standards, and conformity assessment in
the GCC. Tuesday
A while back, a member asked me off-line why UL1310 should not be considered
as a 'stand-alone' safety standard. Please note following excerpt from a
Certification Requirement Decision recently published by UL:
UL 1310 Par. 1.4 intends to specify that where a specific use involves
additional
controllers, and other power equipment.
If you or anyone you know would like to give a product safety technical
presentation, please contact Steve Brody by email at steven.br...@brooks.com
mailto:steven.br...@brooks.com . A technical presentation should be 45 to
60 minutes in duration and be related
Hi all
A little late but look at this link:
http://www.safetylink.com/
and at:
http://www.intertek.com/product-safety-testing/
it was possible to download a Guide to Global market access but I can't
find it any more at the web site, if you need a copy I can send it off line.
Best regards
858-505-2780
Military Avionics EMC Is Our Specialty
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of John
Woodgate
Sent: Thursday, February 03, 2011 1:16 PM
To: emc-p...@ieee.org
Subject: Re: Safety Conformity Schemes
In message b3907962
in psychiatry).
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc-pstc postings are archived and searchable
of any?
John Allen
President
Product Safety Consulting, Inc.
605 Country Club Drive, Suites IJ
Bensenville, IL 60106
P - 630 238-0188 / F - 630 238-0269
1-877-804-3066
jral...@productsafetyinc.com
http://www.productsafetyinc.com
Although PSC maintains the highest level of virus protection
There are 'permanent' humans?
Has the IEC published an OD for these humans?
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of John
Woodgate
Sent: Thursday, February 03, 2011 1:16 PM
To: emc-p...@ieee.org
Subject: Re: Safety Conformity Schemes
In message b3907962-91a3-4777-8bbf-145f2a6ab...@yahoo.com, dated Thu,
3 Feb 2011, Peter Merguerian pmerguerian2...@yahoo.com writes:
Can anyone point me to a single document that describes the various
safety conformity schemes around the world including laws, various
conformity schemes
the mothership lands and re-claims the planet.
Brian
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Peter
Merguerian
Sent: Thursday, February 03, 2011 11:55 AM
To: IEEE EMC Discussion Group
Subject: Safety Conformity Schemes
Dear Group
Dear Group,
Can anyone point me to a single document that describes the various safety
conformity schemes around the world including laws, various conformity
schemes, certification bodies, market surveillance, pre-shipment inspections,
government or private appointed labs, etc?
Thanks very much
The opinions expressed are my own and do not necessarily reflect those of my
employer.
From: iun...@servomex.com [mailto:iun...@servomex.com]
Sent: Wednesday, February 02, 2011 12:46 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Electrical safety IEC 61010-1, Ed. 3
Dear All,
Do any of our North
Dear All,
Do any of our North American colleagues have any idea when US and Canada will
be adopting suitably modified versions of the electrical safety standard IEC
61010-1, Ed. 3?
Many thanks in anticipation of your replies.
Ian Unwin
Servomex
Servomex company information
All,
The scheduled Jan 26th NPSS meeting is canceled.
If you or anyone you know would like to give a product safety technical
presentation, please contact Steve Brody by email at steven.br...@brooks.com
mailto:steven.br...@brooks.com . A technical presentation should be 45 to
60 minutes
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Tony T
Sent: Tuesday, January 18, 2011 3:30 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Sound Pressure Safety (EN 60950) of PC Based Hi-Fi
Nemko USA, Inc. has an opening for a Senior level Product Safety Engineer
familiar with 60950-1, 61010-1, 60601, and/or 60335. A Bachelor's degree and
at least ten (10) years of experience in product safety compliance is required
for this position. Knowledge of NRTL and CB Scheme requirements
, iPods and the like?
Thanks in advance.
Regards
T
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc-pstc
Michael, Martin
Recently, I had an enquiry of a somewhat similar nature, and this is what I
found for Safety
The Australian industrial equipment and standards situation somewhat parallels
that in the EU and the Member States – in that there are Regulations in each
State, which tend
In Australia, all electrical items placed on the market must be safe and meet
the essential electrical safety requirements of AS/NZS3820. This calls up the
product specific standards such as AS/NZS60950 for IT or the AS/NZS60335.2.X
series of standards for domestic appliances. In the case
Hello,
The EU has closed a MRA with Australia (decision 98/508/EC) in 1998. The
sectoral annexes inlcudes machine safety requirments.
I found also the standard AS 4024.1-2006 Series:2006-06 which includes 26
ISO/IEC/EN standards with 664 pages. So far so good.
Does anybody know
.)
Merry Christmas!
Rich
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc-pstc postings are archived and searchable
).
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://product-compliance.oc.ieee.org/
Graphics (in well
are defined as going all the way around back to the beginning, not
just the one way trip to the other point.
Bill
--- On Wed, 12/15/10, Joe Randolph j...@randolph-telecom.com wrote:
From: Joe Randolph j...@randolph-telecom.com
Subject: Re: Need help with safety compliance
Telecom Design Consultant
Randolph Telecom, Inc.
781-721-2848 (USA)
j...@randolph-telecom.com
http://www.randolph-telecom.com http://www.randolph-telecom.com/
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
Telecom, Inc.
781-721-2848 (USA)
j...@randolph-telecom.com
http://www.randolph-telecom.com http://www.randolph-telecom.com/
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message
: Wednesday, December 15, 2010 9:39 AM
To: Bill Owsley; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] Need help with safety compliance for a low power, 150
volt circuit inside a cell phone
Sounds like a touch screen to me, UL is used to those. The isolation I
believe comes from the glass properties
...@yahoo.com]
Sent: Tuesday, December 14, 2010 9:42 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Need help with safety compliance for a low power, 150 volt
circuit inside a cell phone
you could try it like an old Safety engineer from long ago used to do. Get
well grounded and grab the circuit
you could try it like an old Safety engineer from long ago used to do. Get
well grounded and grab the circuit - if he could let go... it was ok.
Note he always brought along some help.
Bill
In the event of a national emergency,
click on the following links to provide directions to your
Telecom Design Consultant
Randolph Telecom, Inc.
781-721-2848 (USA)
j...@randolph-telecom.com
http://www.randolph-telecom.com http://www.randolph-telecom.com/
-
This message is from the IEEE Product Safety Engineering Society emc
Let's not forget the FCC 15.109 requirements if this is a digital device.
-Doug
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Brian O'Connell
Sent: Friday, December 10, 2010 4:01 PM
To: 'EMC-PSTC'
Subject: RE: Rooftop EMC and safety?
Assuming
Assuming this if for lightning and that you are doing it in the U.S., how
about NFPA780 ?
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Curt
McNamara
Sent: Friday, December 10, 2010 1:31 PM
To: EMC-PSTC
Subject: Rooftop EMC and safety
I am designing what is essentially a rooftop low voltage (24V) control
system. What standards exist for EMC and safety in such an environment?
Have found good guidance in NOAA NWSM 30-4106
Curt
Dear All,
Has anyone been successful in getting through Mexico customs with US or
Canadian safety certs in lieu of NOM certificates as per the recent Acuerdo
issued by the Mexican Government?
My recent inquiry to US government officials in Mexico, there are still issues
that are being worked
Dear All,
Has anyone been successful in getting through Mexico customs with US or
Canadian safety certs in lieu of NOM certificates as per the recent Acuerdo
issued by the Mexican Government?
My recent inquiry to US government officials in Mexico, there are still issues
that are being worked
All,
The Northeast Product Safety Society invites you to the 16th annual Vendor’s
Night to be held at the Boxborough Holiday Inn tomorrow evening, November 17th
from 5:00 to 9:30 PM. Vendor's Night is opportunity to get answers to all your
product safety/EMC questions in one evening
All,
The Northeast Product Safety Society invites you to the 16th annual Vendor’s
Night to be held at the Boxborough Holiday Inn on Wednesday evening, November
18th from 5:00 to 9:30 PM. Vendor's Night is opportunity to get answers to all
your product safety/EMC questions in one evening
All,
The scheduled October 27th NPSS meeting is canceled.
If you or anyone you know would like to give a product safety technical
presentation, please contact Steve Brody by email at steven.br...@brooks.com
mailto:steven.br...@brooks.com . A technical presentation should be 45 to 60
Do you have ideas about how the Product Safety Engineering Society can better
serve the medical devices community? Are there tools and techniques you think
can make a difference? If so, you can help by taking an active role on the
Medical Device subcommittee. Leadership positions are available
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting tonight, September 22nd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Brad Bombardier
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, September 22nd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Brad
SCV Meeting Announcement for September 28th 2010; What's in
your electronic product, where does it come from, and why should a Product
Safety Engineer be concerned?
-- Forwarded message --
From: Roberto Pasos [mailto:roberto.pa...@ntscorp.com]
IEEE Product Safety
Engineering
Posted for a company looking for a Medical Safety consultant located near
Seattle, Washington.
Please reply directly to contact's email. fa...@myotronics.com
Medical Device Manufacturer is looking for a Safety Engineering consultant to
help with safety tests related to section 8 of the IEC
in a reply, otherwise it is liable
to confuse the enquirer.
Compliance with EN60950 (at any issue of the standard) is not a legal
requirement within the EU. The legal requirement is compliance with
the Essential Health and Safety Requirements of any relevant
Directive(s) that apply
There is surely a more basic point to consider, too?
Compliance with EN60950 (at any issue of the standard) is not a legal
requirement within the EU. The legal requirement is compliance with the
Essential Health and Safety Requirements of any relevant Directive(s) that
apply to the product
In message 4c815ed8.5000...@oracle.com, dated Fri, 3 Sep 2010, Monrad
Monsen monrad.mon...@oracle.com writes:
Do you interpret the European Union rules for implementing the new
EN60950-1:2006+A11:2009 (2nd Edition) safety standard on products the
same way that I do?
No. Your message is far
Do you interpret the European Union rules for implementing the new
EN60950-1:2006+A11:2009 (2nd Edition) safety standard on products the same way
that I do?
EN60950-1:2006+A11:2009 (2nd Edition safety standard) becomes mandatory for
Information Technology Equipment (computers, etc.) on 1
-- Forwarded message --
From: Roberto Pasos [mailto:roberto.pa...@ntscorp.com]
IEEE Product Safety
Engineering Society
Santa Clara Valley Chapter
Meeting Date: Tuesday, September 28, 2010
Dinner: 5:30 – 6:45 p.m.
Socialize with your colleagues
From: Roberto Pasos [mailto:roberto.pa...@ntscorp.com]
IEEE Product Safety
Engineering Society
Santa Clara Valley Chapter
Meeting Date: Tuesday, September 28, 2010
Dinner: 5:30 – 6:45 p.m.
Socialize with your colleagues and tonight’s speaker at: El Torito Mexican
I am looking for Tank fuel management monitoring directives and European
Standards.
Thanks
Moshe
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc-pstc postings
My colleague has a contract position open. Please reply to Mark.
Product Safety Engineer
Education
· BS in Electrical Engineering or equivalent experience
· iNARTE (The International Association for Radio, Telecommunications
and Electromagnetics ) certification
Minor update regarding Service Robots:
In addition to ISO 13482 (currently at CD stage - committee draft) Robots and
robotic devices - Safety requirements - Non-medical personal care robot
(provisional title)
Regarding the parallel EN version, EN ISO 13482, http://esearch.cen.eu
Technological Innovation and Excellence for the Benefit of
Humanity
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
emc-p...@ieee.org
All emc-pstc postings are archived and searchable on the web at
http
. Mahatma Gandhi
On 10-May-10, at 19:45 , Glyn Garside wrote:
1) Also to mention, a US standard for AGV's and related equipment in the
industrial area:
ANSI B56.5 Safety Standard for Guided Industrial Vehicles and Automated
Functions of Manned Industrial
to academia.
If you use risk analysis or hazard based safety engineering, you can
assess
hazards to a point where risks are tolerable or not by setting limits, using
barriers, selecting specific materials, etc. How you address the risks is
where you need to use engineering principles
Find me LinkedIn at http://www.linkedin.com/in/dougnix
Fostering Technological Innovation and Excellence for the Benefit of
Humanity.
On 10-May-10, at 11:51 , Brian O'Connell wrote:
Mr Nix is a member of TC184, so will defer to his comments on
industrial robotic safety as authoritative
1001 - 1100 of 3451 matches
Mail list logo