ttp://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
?start=0
And was able to use a user space python component to poll the tool table
offsets I need and place them on hal pins.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher via Emc-users
Sent
Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
-2105ext. 2031
-Original Message-
From: Dave Engvall
Sent: Thursday, May 23, 2024 11:41 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Vevor 12 nm 90 v stepper servo
[EXTERNAL EMAIL] Be sure links are safe.
Hi,
Don’t know yet if I’m going to need this much power/torque but thot
So this begs the question, how is it done?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Chris Morley
Sent: Wednesday, May 22, 2024 11:58 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
the height of the screws.
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
From: andy pugh
Sent: Tuesday, May 21, 2024 9:11 AM
To: Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc
oo.gl/yiyW5EA5syhmPgWw7
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Viesturs Lācis
Sent: Tuesday, May 21, 2024 7:03 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Tool length probe
[You
4, 2024 9:26 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Beam Stiffening?
[EXTERNAL EMAIL] Be sure links are safe.
I think I fell for the “beam is bending” idea too. It might be. The way to
find out is to measure the beam center with the dial indicator and then me
-Original Message-
From: Jon Elson
Sent: Wednesday, May 15, 2024 7:20 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Acceleration Settings?
[EXTERNAL EMAIL] Be sure links are safe.
On 5/15/24 12:23, Todd Zuercher via Emc-users wrote:
> I'm trying to figure out someth
are.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
. 1973
A triangular tube is more twist and bend resistant than a square, rectangular,
or round tube, and it is lower mass than a square or rectangular tube. Even
less mass with all the bits removed to cut an isogrid.
On Monday, May 13, 2024 at 02:49:51 PM MDT, Todd Zuercher via Emc-users
wrote
to each end pulled tight.
Use small turn buckles to tighten the cables over the block on that one
side.You may be able to reduce the mass of the beam with the added stiffness of
the blocks and cables.
Be safe.
Dale
On Monday, May 13, 2024 at 07:31:34 PM EDT, Ralph Stirling via Emc-users
and cables.
Be safe.
Dale
On Monday, May 13, 2024 at 07:31:34 PM EDT, Ralph Stirling via Emc-users
wrote:
Can you run a steel cable through it and tension it? Might stiffen it up some.
-- Ralph
On May 13, 2024 1:46 PM, Todd Zuercher via Emc-users
wrote:
CAUTION: This email
Can you run a steel cable through it and tension it? Might stiffen it up some.
-- Ralph
On May 13, 2024 1:46 PM, Todd Zuercher via Emc-users
wrote:
CAUTION: This email originated from outside the Walla Walla University email
system.
Anyone have any brilliant ideas to stiffen a woefully
8
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
by this?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Monday, April 15, 2024 5:09 PM
To: Todd Zuercher
Cc: Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa Card Stepgens?
[EXTERNAL
, 2024 3:31 PM
To: Todd Zuercher
Cc: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Global Named Parameter?
[EXTERNAL EMAIL] Be sure links are safe.
On 10 May 2024, at 19:55, Todd Zuercher
mailto:to...@pgrahamdunn.com>> wrote:
Is there a way to bring out a tool offset
Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
From: andy pugh
Sent: Thursday, May 09, 2024 7:33 PM
To: Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Global Named Parameter?
[EXTERNAL EMAIL] Be sur
Message-
From: Sam Sokolik
Sent: Friday, May 10, 2024 6:50 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] cloning hard drive
[EXTERNAL EMAIL] Be sure links are safe.
2nd clonezilla.. use it all the time at work.
On Fri, May 10, 2024, 5:42 AM Ed wrote:
> On 5/10/24 4:10
for offsetting the joint's
position.
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
ntain Gid: ( 20/ dialout)
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: zz...@seznam.cz
Sent: Wednesday, May 08, 2024 1:45 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Mb2hal 2.9?
[You d
not be there, or would it not have any devices in it, or would the
device just not work?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Wednesday, May 08, 2024 12:23 PM
To: emc-users@lists.sourceforge.net
is all I needed to do to get this working as it was
before.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Wednesday, May 08, 2024 12:23 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher via Emc-users
Sent: Wednesday, May 08, 2024 8:13 AM
To: andy pugh ; Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
achine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
[EXTERNAL EMAIL] Be sure links are safe.
On Wed, 8 May 2024 at 02:15, Todd Zuercher via Emc-users
mailto:emc-users@lists.sourceforge.net>> wrote:
It was already set to 3.
What is your MB2HAL load line?
What doe
(only in transactions).
INIT_DEBUG=3
Maybe set yours to 3 to get more information?
John
> -Original Message-
> From: Todd Zuercher via Emc-users [mailto:emc-
> us...@lists.sourceforge.net]
> Sent: May 7, 2024 1:29 PM
> To: Peter Wallace; Todd Zuercher via Emc-users
> Cc: Tod
-Original Message-
From: Peter Wallace
Sent: Tuesday, May 07, 2024 4:16 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
[EXTERNAL EMAIL] Be sure links are safe.
On Tue, 7 May 2024, Todd Zuercher via Emc-users wrote:
> Date: Tue, 7 May 2024 19
in mb2hal between 2.7 and 2.9 that would
require a change to the mb2hal configuration files?
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc
, 2024 12:25 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] BeagleY-AI
[EXTERNAL EMAIL] Be sure links are safe.
Apparently available in June it looks like this version of the Beagle may well
be a good successor to the original Beagle and MachineKit.
https://www.mouser.ca/new
Sorry, That was always hidden behind the UI. I never issued a G10 command. I didn't realize that was the GCode behind it. The Probe Basic makes extensive use of G10 in the
probing routine.
On 4/22/24 5:54 AM, andy pugh wrote:
On Sun, 21 Apr 2024 at 02:33, Billy Huddleston via Emc-users
I'm unfamiliar with G10 commands or how they would apply to this. I read over
the documentation on them and don't quiet understand how they would work for
this.
On 4/20/24 6:59 AM, andy pugh wrote:
On Sat, 20 Apr 2024 at 02:12, Billy Huddleston via Emc-users
wrote:
> However, When
rk as well.
Thanks, Billy aka Connor
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
all.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Chris Albertson
Sent: Wednesday, April 17, 2024 8:51 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card Stepgens?
[EXTE
fast. Atomic
Energy Canada Limited found that out with the Therac 25.
On Wednesday, April 17, 2024 at 11:04:07 AM MDT, Todd Zuercher via Emc-users
wrote:
Sorry to hijack the thread, but I've had to live with this on a machine that
I'm using cascaded double PID loops on. I have the velocity
Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Wednesday, April 17, 2024 1:09 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Home to index triggers following error
[EXTERNAL EMAIL] Be sure
)828-2105ext. 2031
-Original Message-
From: andy pugh
Sent: Wednesday, April 17, 2024 8:47 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Home to index triggers following error
[EXTERNAL EMAIL] Be sure links are safe.
On Wed, 17 Apr 2024 at 12:45, Tomaz T. wrote:
now
into
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
if
I don't want an occasional miss, this while driving the lc42 driver.
These drivers all have opto inputs, and need a little longer step on the
less than 5 volt signals.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Monday, April 15, 2024 3:41 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mesa Card Stepgens?
[EXTERNAL EMAIL] Be sure links are safe.
On Mon
php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ther possibility might be to steal the pcb drill idea of a tight fitting
> printed ring placed on a bit shank to serve as a depth stop, that you could
> put in the tool table.
>
> Methods depend on your imagination.
>> ___
>> E
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
is visting her mom in Tokyo right now.
Maybe when I am older I will talk about the days of manually driven gas cars.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Chris Albertson
Sent: Wednesday, April 10, 2024 4:26 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Carving a spiral
[EXTERNAL EMAIL] Be sure links are safe.
> On Apr 10, 2
-2105ext. 2031
-Original Message-
From: Leonardo Marsaglia
Sent: Wednesday, April 10, 2024 1:06 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Found the main issue. The terminal block in wich
/teaching/fa16_2312/handouts/parametric/ParamGraphs.pdf
for example (p. 2 and 3).
-- Ralph
From: Chris Albertson [albertson.ch...@gmail.com]
Sent: Wednesday, April 10, 2024 10:28 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Carving a spiral
[3*#]] GE #]
G03 X0 Y[#-[3*#]]R[#-[3*#]]
o ENDIF
o IF [[# - #] GE #]
G03 X[[#-#]*[-1]] Y0 R[#-#]
o ENDIF
# = [#-#]
o ENDWHILE
G0 Z#<_close_Z>
G55
o endsub
Alan
> From: "John Dammeyer" mailto:jo...@autoartisans.com>>
> Subject: [Emc-users
: Wednesday, April 10, 2024 7:56 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Hello guys, I hope you're doing well
I'm having problems with a Daewoo Puma 12L lathe to index some tools. The
problem is that some
with Linuxcnc not running, and two yellow, and
blinking green with Linuxcnc.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher via Emc-users
Sent: Tuesday, April 02, 2024 7:57 AM
To: Peter Wallace ; Todd
Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] 7i84 Trouble?
[EXTERNAL EMAIL] Be sure links are safe.
On Mon, 1 Apr 2024, Todd Zuercher via Emc-users wrote:
> Date: Mon, 1 Apr 2024 20:49:01 +
> From: Todd Zuercher via Emc-users
> To: "Enhanced Machine Controller (EMC)&q
ttp://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
-Original Message-
From: John Dammeyer
Sent: Thursday, March 28, 2024 1:35 AM
To: 'Enhanced Machine Controller (EMC)'
Subject: Re: [Emc-users] GibbsCAM machine .pst file.
[EXTERNAL EMAIL] Be sure links are safe.
Oh and I made a mistake. The pst file I have is for a Fadal. And a reference
an M3 in front of the S300.
>
> There are probably other issues too that I haven't found yet.
>
> Thanks
>
> John
>
>
>
>
> _______
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/lis
it.
https://www.gibbscam.com/en
John
> -Original Message-
> From: Dale Ertley via Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent: March 21, 2024 7:52 AM
> To: Enhanced Machine Controller (EMC)
> Cc: Dale Ertley
> Subject: Re: [Emc-users] HAAS file
>
>
> H
what the HAAS was told to do.
Is there a way to translate these files? They are too big to attach but I
can email them if someone knows how to do this.
Thanks
John
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/
to as TWAT
> tubes back in Nike Hercules tech school in 1977.
>
> Dave
> ex MOS 22L
>
> On Tue, Mar 19, 2024 at 4:35 PM gene heskett wrote:
>
> > On 3/19/24 14:15, Robin Szemeti via Emc-users wrote:
> > > I purchased a couple of large travelling wave tube amplifiers
, gene heskett wrote:
> >
> > On 3/18/24 18:50, Jon Elson wrote:
> >> On 3/18/24 07:53, Todd Zuercher via Emc-users wrote:
> >>> Gene,
> >>>
> >>> In all honesty I wouldn't mind knowing more about your VFD source you
> say you want black liste
on, 18 Mar 2024 at 17:45, gene heskett wrote:
> On 3/18/24 11:28, Todd Zuercher via Emc-users wrote:
> > Gene,
> >
> Well 2 things I've observed since posting that, Todd. the pix is
> identical for a 3 kilohertz version on amazon for about the same price,
> once adjuste
11:18 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Not so slight problem with spindle/tools
[EXTERNAL EMAIL] Be sure links are safe.
Indeed, using drive dog threaded holes. Initially I did think about a flat disc
but cannot see that gives me any better holding strength than
no clue, is also another annoying trick to
perform.)
Todd Zuercherm
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Sunday, March 17, 2024 8:52 AM
To: emc-users@lists.sourceforge.net
Subject: [Emc-users
treat them.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Mon, 4 Mar 2024, gene heskett wrote:
> On 3/4/24 12:32, andy pugh wrote:
>> On Mon, 4 Mar 2024 at 17:02, fxkl47BF--- via Emc-users
>> wrote:
>>>
>>> i'm looking for retail suppliers of straight internal spur gears
>>> imperial and/or me
i'm looking for retail suppliers of straight internal spur gears
imperial and/or metric
other than sdp-si.com
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
, but in my case I have never had to do anything special
to make it work.
whats the error message?
whats the output of ip route?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
for the info. Those might well serve me in case of using the
original DC servos the machine has.
El vie, 9 feb 2024 a las 21:37, Dale Ertley via Emc-users (<
emc-users@lists.sourceforge.net>) escribió:
> I have 4 drives am going to try from Machdrives.com. They use Tuna
> graphical soft
to find something that big.
Do you guys recommend any particular brand or source to find such a speed
controller?
Thanks as always.
Leonardo
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
to logout from "newname" it says "logout from cnc"
So, I have clearly missed something, but I don't know what. Help!!!
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
44618
Phone: (330)828-2105ext. 2031
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
, a small 24v supply
and the SSR controlled line outlet.
Thanks,
Alan
> From: gene heskett
> Subject: Re: [Emc-users] Damaged an SSR
> Date: December 31, 2023 at 1:42:07 PM CST
> To: emc-users@lists.sourceforge.net
>
>
> On 12/31/23 12:50, condit.alan--- via Emc-users
precaution I should
take for the future?
Alan
Sent from my iPhone
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
as force is applied, the motor pushes on the
screw one way and the motor mounts in an equal but opposite direction.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
to whip or sag much. A benefit that a
short screw will have with tension is zero lash from end play because it won't
have any end play.
On Monday, December 25, 2023 at 05:06:20 PM MST, Linden via Emc-users
wrote:
Hello All,
In the early stages of converting a 13 x 24 inch manual Chinese
lathe
can
have 4000 N of linear force on the carriage and I think that's more than
enough.
Hope this helps!
El lun, 25 de dic. de 2023 21:08, Linden via Emc-users <
emc-users@lists.sourceforge.net> escribió:
Hello All,
In the early stages of converting a 13 x 24 inch manual Chinese
screw in RPM? The servo motor I am using has a top
speed of 3000rpm and I am trying to figure out reduction ratio that is
realistic.
Thanks in advance for any help or suggestions.
Linden
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
That is super helpful, thanks!
Sent from my iPhone
> On Dec 19, 2023, at 6:31 AM, andy pugh wrote:
>
> On Mon, 18 Dec 2023 at 17:05, Alan Thomason via Emc-users
> wrote:
>
>> Is it possible to script in the initial file for the system to switch to
&
;
> Todd Zuercher
> P. Graham Dunn Inc.
> 630 Henry Street
> Dalton, Ohio 44618
> Phone: (330)828-2105ext. 2031
>
> -Original Message-
> From: Alan Thomason via Emc-users
> Sent: Monday, December 18, 2023 12:01 PM
> To: emc-users@lists.sourceforge.n
without turning off power, so there is
no safety concern.
Thanks so much,
Alan
Sent from my iPhone
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
y can be driven at unreal speeds w/o losing home.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
1 additional digital output.
I will be using a fresh build of linuxcnc on a 64bit Ubuntu platform.
Thanks very much,
Alan
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
so much, Alan.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Emc-users
wrote:
i'm trying to find a slicing blade for a 10 inch table saw
a blade that is smooth and sharp, no teeth
for making smooth cuts in foam material and cardboard
i guess if there's no such critter i could make one
grind down the teeth on a cheap blade
have any of y'all seen
On Fri, 8 Dec 2023, Thaddeus Waldner wrote:
> Fresh chicken cutting machines run at 2800rpm, I believe.
>
>> On Dec 8, 2023, at 10:31 AM, fxkl47BF--- via Emc-users
>> wrote:
>>
>> i'm trying to find a slicing blade for a 10 inch table saw
>> a blad
On Fri, 8 Dec 2023, andy pugh wrote:
> On Fri, 8 Dec 2023 at 16:31, fxkl47BF--- via Emc-users
> wrote:
>>
>> i'm trying to find a slicing blade for a 10 inch table saw
>> a blade that is smooth and sharp, no teeth
>
> I have seen "band blades" for cut
such
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
s. Then you could wedge a shape (like a tiny
axe head?) into the slot and force the disk to stop on an even degree. You
could use more than one wedge, space them around the disk.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lis
On Tue, 7 Nov 2023, andy pugh wrote:
> On Tue, 7 Nov 2023 at 14:29, fxkl47BF--- via Emc-users
> wrote:
>>
>> i have two systems i use to run linuxcnc sim
>> both are debian 11, bullseye
>> i installed linuxcnc 2.9 on both and it worked perfectly
>
> How did
On Tue, 7 Nov 2023, Gene Weber wrote:
> Have you tried: sudo apt --fix-broken install ?
>
> On Tuesday, November 7, 2023 at 09:27:56 AM EST, fxkl47BF--- via Emc-users
> wrote:
>
>
> i have two systems i use to run linuxcnc sim
> both are debian 11, bullseye
> i ins
Have you tried: sudo apt --fix-broken install ?
On Tuesday, November 7, 2023 at 09:27:56 AM EST, fxkl47BF--- via Emc-users
wrote:
i have two systems i use to run linuxcnc sim
both are debian 11, bullseye
i installed linuxcnc 2.9 on both and it worked perfectly
last night i ran apt
e's probably a simple fix
anyone care to share
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Newspaper, 1912
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourc
al geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_____
fix the verison misspelling too)
Done.
> ___________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@
On Wed, 1 Nov 2023, gene heskett wrote:
> On 11/1/23 16:20, fxkl47BF--- via Emc-users wrote:
>> anyone here have any experience with this controller
>>
>> https://www.st.com/en/ecosystems/x-nucleo-ihm03a1.html
>>
>> .
> First: That boards purported intelligen
anyone here have any experience with this controller
https://www.st.com/en/ecosystems/x-nucleo-ihm03a1.html
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
___
Emc-users mailin
1 - 100 of 902 matches
Mail list logo