how
you are setup.
Buchan
--
|--Another happy Mandrake Club member--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key
happy Mandrake Club member--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key http://ranger.dnsalias.com/bgmilne.asc
--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key http://ranger.dnsalias.com/bgmilne.asc
1024D/60D204A7 2919 E232 5610 A038 87B1
-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key http://ranger.dnsalias.com/bgmilne.asc
1024D/60D204A7 2919 E232 5610 A038 87B1
has enabled write
for whoever is trying to upload drivers.
Regards,
Norman
--
|--Another happy Mandrake Club member--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch
/mandrake/
Also check Sylvestre's page:
http://people.mandrakesoft.com/~staburet/samba
Regards,
Buchan
--
|--Another happy Mandrake Club member--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
for samba packages for
various releases on various Mandrake dists.
Buchan
--
|--Another happy Mandrake Club member--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive
--
|--Another happy Mandrake Club member--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key http://ranger.dnsalias.com
[EMAIL PROTECTED], [EMAIL PROTECTED] wrote:
On Sat Mar 16, 2002 at 10:16:38AM +0100, Antonio Galea wrote:
[...]
Not having done too much with pam before, I'm really not sure where to
go with this.
=20
I've found this reference, which applies to your case:
=20
know if the attaches
link to article is correct.
http://techupdate.zdnet.com/techupdate/stories/main/0,14179,2820882,00.html
Larry
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work
in digest ...
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
ed, is not a pop server, eg. I can not download mail
from it. So I'm asking for a pop server :)
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 80
fter hours ...
This should make an interesting machine to "crashtest" ...
(if replying to expert, please cc to me directly, I am receiving expert
in digest mode ...)
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Netwo
ality.
Cheers,
--Al
--
|----Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
few weeks ago there was a discussion
about 66/100 drives not living up to specs. So I'm looking for
reccomendation on a drive. Brand and model if you please. Thanks in
advance,
Cecil
--
|Registered Linux User #182071-|
Buchan MilneMechanical
[root@ahuizotl /root]# lpq
lp is ready
Does anyone know how to fix this ? Any idea would be greatly
appreciated.
Fabian.
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Wo
use
Star Office now ...
No wonder the newbie list has been dropped... too much like hard work ;-)
Bill Gates would be proud of us :-(
Sigh
[snip]
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work
nt -
http://forums.itrc.hp.com
The Father's Rights Network -
http://www.abs-comptech.com/frn/frnhome.html
The Pennsylvania Parenthood Initiative - PAPI - Children need BOTH
Parents
- http://www.geocities.com/Heartland/4688/papi.htm
--
|Registered Linux User #182071-----|
Bu
I think this one got lost ... so here it is again.
Original Message
Subject: PAM question
Date: Thu, 25 Jan 2001 09:35:53 +0200
From: Buchan Milne [EMAIL PROTECTED]
Organization: Stellenbosch Automotive Engineering
To: Expert Linux List [EMAIL PROTECTED]
I am currently trying
soon but I need to
migrate them ASAP. So the question is: How do I instruct Mandrake to accept
whaterver silly thing the users have chosen as their password.
Can anyone help me please?
--
|Registered Linux User #182071-----|
Buchan MilneMechanica
: fifo was 0 times empty and 59 times full, min fill was 93%.
[root@dell /root]#
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive
.
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
L. Neil Smith
==
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
uld be appreciated.
Stuart
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
7 hours so far, and no-one else has pitched here yet - it's
still 6am! That's what happens when your mail server decides to only do
local deliveries ! It seems to work now.
Buchan
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Enginee
Original post again, haven't seen it on the list yet ...
Original Message
Subject: PAM question
Date: Thu, 25 Jan 2001 09:35:53 +0200
From: Buchan Milne [EMAIL PROTECTED]
Organization: Stellenbosch Automotive Engineering
To: Expert Linux List [EMAIL PROTECTED]
I am currently
-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
setup correctly.
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
menu item. Is command line rpm any better or
will this happen with that as well.
Darren
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
St
't kept up with the updates from the unsupported directory, since
I have a working printserver for 40 clients on 2 printers, and don't
want to fix something that isn't broken ...
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Enginee
syslog:
syslogd startup succeeded Jan 19 13:49:07 apollo syslog: klogd startup
succeeded
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
)
Are there other things that I should do?
cdrecord --scanbus ;-)
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering
Alen Salamun wrote:
Hi!
Did you report that as a bug yet?
Someone else did today
:https://qa.mandrakesoft.com/dimension/cgi-bin/show_bug.cgi?id=1959
Bye,
Alen
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network
-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
ction.
Anyone know how I can use multiple connections with the same network
device. I have an opportunity to go out there tomorrow to test it (after
testing at home tonight), so a prompt answer would be nice !
Buchan
--
|Registered Linux User #182071-----|
Buchan Milne
I was wondering when someone else would experience this.
There is a problem with the supplied /etc/smb.conf file. Edit the file
and add the "-r" switch to the "print command =" line, which will force
cups to delete the file afterwards.
Original Message
On 1/15/01, 9:39:40 AM, Alen
ntallation with only 2 mdk cds available.
thanx a lot
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering
ditur."
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
There is an mbx2mbox utility somewhere, which will convert your *.mbx files
into mbox mailbox directory, which would mean you could access it from any
mbox capable client, which even includes the standard IMAP server supplied
with MDK.
Buchan
P.S. TO find mbx2mbox, search where you normally
inux stuff but would lose some Win95 stuff.)
Any suggestions appreciated.
Michael
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Ste
ody know 'exactely' how to get the most
out of the HP?
Thanks for any reply
Mogens Jger
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stell
User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
ioninc.com
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
to move things around because I
ran OUT! (been there, done that, real pain))
Buchan
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
our gateway to the underground
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
gives? I'm
running LM7.2.
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
versa? Settings in DrakConf?
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
The Creative Webcam Blaster 3 (USB) (not the Webcam Go) works very well under mandrake. Just do:
# modprobe ov511
as root o get it running.
Buchan
Tal Amir wrote:
[EMAIL PROTECTED]">
got the same problem with 3com home-connect (usb)
and i could not find any usb device that would work for
Windows9x with share level does not need a username, just a password.
Try the following, you need this to work before samba (which gets the print
job from cups) will be able to print through your win box:
smbclient -L netbios_name_of_windows_box
If you get errors, post them and your
Note that Alan's patches seem mostly to be bringing
other architectures up-to-date (like ARM), and doesn't actually make any
changes on iX86 (or so I've read)
Buchan
Mike MacCana wrote:
[EMAIL PROTECTED]">
The source RPM from cooker most likely already has ALSA, ReiserFS, and
supermount
You should probably write a startup script that
contains what you have put in your rc.local, and just ensure that it runs
before smb,named,dhcp etc by ensuring that the symlink in your run-level
directory has a lower value than the first newtork service.
Look in your /etc/rc3.d directory ...
module for 3com home-connect usb cam ?
is it supported under mandrake, or under any other distro ?
cause i cant seem to make it work :((
On Tue, 9 Jan 2001, Buchan Milne wrote:
Date: Tue, 09 Jan 2001 12:04:13 +0200
From: Buchan Milne [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED
650) 369-7369 Fax: +1 (650) 429-2122
**
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROT
yourself to password-sniffing.
Buchan
--
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http
, except in full-screen mode. Didn't try with radio, but after
runnung "make xconfig" in /usr/src/linux, I see that the Zoltrix cards
are supported ...
Buchan
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
- mike
--
|Registered Linux User #182071-----|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 808 2497
Stellenbosch Automotive Engineering http://www.cae.co.za
Sheldon Lee Wen wrote:
On January 3, 2001 10:03 pm, you wrote:
Hi guys,
I did a stupid thing. I tried to update the Kernel from 2.2.X to
2.2.16 using the Update manager. Little needs to be said -- it didn't work.
In fact my system won't boot anymore. I get a System Panic can't mount
I believe hdparm is actually a utility to set the kernel parameters.
That is why, for instance, when the ata100 driver first appeared in the
kernel, there was a new hdparm to use to enable it.
You can also get around the whole thing by passing kernel options at
boot, like "ide0=dma", which is
In an attempt to get our CD-RW server back up and writing CDs, I have
installed the kernel 2.2.16-9mdk from the 7.1 updates. After doing the
mkinitrd and editing the lilo.conf file etc, I rebooted. The kernel
mounted the root partition ro, then had the following 2 error messages:
Cannot open
Maybe in the final release of KDE 2.1 they will have finalized KMOZILLA,
then you should have decent rendering in a light browser. I haven't
managed to keep Galeon working for very long, although it's quite good
(small, good rendering thanks to mozilla)
Buchan
Praedor Tempus wrote:
I just
To all those who are having problems with cdrecord under 7.2, I have
found a workable solution (just in time, I am going away and people want
to use our CDwriting server).
The solution was to compile a kernel (2.2.18) from vanilla (in my case
also patched for ReiserFS) source, remembering of
ions' does what?
Buchan Milne [EMAIL PROTECTED] wrote:
boot, like "ide0=dma", which is what I use on my custom kernel with
udma66.
Well, I've not used the hard drive optimizations because of the
"warning - data damage likely" comment.
Has anyone had data los
Things like php and ssl work out-the-box (I had trouble with this on
Redhat). urpmi doesn't have an equal on other rpm distros, although it
apparently isn't quite as good as apt on debian. Th emost useful tool
would probably be MandrakeUpdate, which means that you would need some
parts of X, but
I haven't had any problems with 2 seperate machines and 2 seperate
external modems. Could yo give us more details ? What software are you
using? What modem is it? What init string are you using?
Buchan
Praveen Srinivasan wrote:
Hi,
I have two external modems which work fine in windows with
Hi Tom,
You neglected to say if you tested on 7.2 also, but I assume you
did
Your test isn't really going to be of much value (I think) because you
are using a scsi writer. All the problems so far have been with ide.
I am wondering if I am getting a variation of the problem mentioned on
HI Roger,
I am trying to find out if the problem relates to ide only, ot to scsi
as well. I have a problem with an ide device ...
So, since you didn't post your dev= line, coudl you let me know if you
have an ide device or scsi
Buchan
Roger Sherman wrote:
Tom, sorry to call you out
Hi,
I have 3 linux boxes (2 running LM7.1, 1 running LM 7.2). The 7.2 box I
reinstalled over the weekend from redhat 6.2.
All machines run samba, however 2 of the 3 (including the reinstalled
machine which is our printserver) are getting the following error very
often:
Can't create or use IPC
Hi Olaf,
I recently started getting the same message on a Mandrake 7.1 box
running the Mandrake-Update-supplied samba 2.0.7 (a P166 MMX). I also
have the same setup on a 500 celeron, but thankfully don't get the
message here since this is the PDC for our NT Domain.
I got the message previously
Hi All,
I decided to reinstall our P75 redhat 6.2
printserver/intranetserver/cd-writing server to Mandrake 7.2 today (if
you want to know why I would break something that's working, it is that
our other 2 servers run Mandrake, I have a new admin to train up - best
not to confuse him with
Thanks to whoever made the new packages on mandragon from cooker
announced recently. I am happily using Mozilla i586 (was using the i386
version from linuxberg previously).
Since it was too much trouble to compile Nuatilus, Evolution etc, maybe
you could compile basla 1.0
Thanks
Buchan
Keep
/usr/share/doc/kernel-2.2.x/kernel-2.2.x-ymdk-i586.config
(Mdk 7.2)
Buchan
Steven Boothe wrote:
Hello:
I would like to re-compile my kernel, but the last time I did this I
discovered that "make menuconfig" was not aware of the current options
applied to my kernel. It was really time
Hi,
When I was running LM 7.1 I used screem 0.3 quite successfully, but now
under 7.2, using the version of screem that came with it, on a standard
LM 7.2 install, and it crashes all the time (mostly when trying to close
a tag).
Any ideas ?
Buchan
Keep in touch with
.
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Enginee
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
just want to control run-levels (which you can of course use to
start other scripts, just put the desided runlevel in the append = line
(lilo) or the kernel line (grub)
Buchan
--
|--|
Buchan MilneMechanical Engineer
]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROTECTED]
Centre for Automotive Engineering http://www.cae.co.za
South Afr
PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROTECTED]
Centre for Automotive Engineering http://www
gard
Paul
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Netwo
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
about set-uid root.
praedor
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechan
is included, and is about the best command-line client.
Maybe yuor urpmi database got lost. Update it with urpmi.update, while
the CD you want is in the drive, mounted if you don't use supermount.
Buchan
--
|--|
Buchan Milne
://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email
t it to work.
Regards,
Buchan
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROTECTED]
Centre for Automotive Engineering
://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +2782472
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
iling list.
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone
between NTFS and FAT32, choose FAT32 for better
compatibility with Linux.
Of course, the only way to make sure all versions of windows can get to
your data is to use FAT16 (for those of us stuck with NT).
Buchan
--
|--|
Buchan Milne
.
Buchan
--
|--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROTECTED]
Centre for Automotive Engineering
in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +2782472
partition, and NT would install onto it (where an NTFS partition
made by PM4 would not work).
When the kernel supports NTFS, we diskdrake will hopefully be able to
format/resize NTFS
Buchan
--
|--|
Buchan MilneMechanical
Bruno Damour wrote:
Hello,
I have updated my config to LM 7.2 and I am trying to recover the tools I had
previously : Webmin and phpPgAdmin.
I had to install mod_php ans now it seems to work the apache welcome screen
functions at http://localhost, only when I try to connect to to
--
|--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROTECTED]
Centre for Automotive Engineering http://www.cae.co.za
South Africas first satellite
PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROTECTED]
Centre for Automotive Engineering
http://migpc.eresmas.com |
|__|
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan Milne
iling list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email mailto:[EMAIL PROTECTED]
Centre for Automotive E
://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +2782472
without any problems i wish i could do that here
with
my ext2 sysytem into rieserfs
--
|--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone +27824722231
email
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
--
|------|
Buchan MilneMechanical Engineer, Network Manager
. No need to waste precious HD space...
Mandrake install CD is good enough, choose upgrade (or rescue before it
boots) and wait for it to mount your partitions. Of course, vi knowlegde
always comes in handy here.
Buchan
--
|--|
Buchan Milne
1 - 100 of 206 matches
Mail list logo