Chad Perrin wrote:
I have a couple of niggling little, er, quirks that I'd like to get
sorted out on my FreeBSD Thinkpad.
1. During boot, if I'm booting up anywhere but at home (where my static
IP address configuration applies), the startup messages pause for a few
long seconds at a
Dear list
Running FreeBSD-6.1 RELEASE on Thinkpad 380XD, I have been using this
notebook for many years (and used FreeBSD from 4.7 to 6.1). An ethernet
card is plugged on the first PCMCIA slot and I inserted my FC card
reader (PCMCIA card produced by Hitachi) and noticed it's not detected
(no
Chad Perrin wrote:
I have a couple of niggling little, er, quirks that I'd like to get
sorted out on my FreeBSD Thinkpad.
2. For some reason, if I use DHCP at all then want to switch back to my
static IP setup, I have to restart the computer to get it to access the
Internet. I
On 02/07/07, Frank Bonnet [EMAIL PROTECTED] wrote:
Hello
I tried twice starting from a fresh 6.2-R installed machine
and followed intructions of the updating file but it failed
twice ... Once Xorg has been upgraded I've never been able
to start X server again , I use KDE so I start X server
Thierry Lacoste [EMAIL PROTECTED] writes:
Hello,
I have a very similar setting on 6.1
Maybe you have an ACL problem (see below).
What does the following command give?
ldapsearch -x -D cn=testuser,ou=people,dc=interne,dc=example,dc=org -W
The command asks for an ldap password that I type
On Wed, Jul 04, 2007 at 03:14:28PM +1000, Mikhail Goriachev wrote:
Nejc Škoberne wrote:
Hello,
I am running BIND (from base system) on my FreeBSD 5.3 machine. The box is
connected to outer world via ADSL connection (tun0 device). If the named is
started when the machine is connected to
Hi,
I am in process of upgrading a serie of servers from 4.11 to 5.5 (and
them 6.2).
I am on the 5.5 phase. I did 2 machines sucessfully. On upgrading the
thrid one, the boot will hang after SCSI buss reset, whenver I plug in
the mouse or an Intel Pro/1000 MT Gigabit card.
I don't know
On Wed, 2007-07-04 at 07:59 +0200, Peter Boosten wrote:
Chad Perrin wrote:
I have a couple of niggling little, er, quirks that I'd like to get
sorted out on my FreeBSD Thinkpad.
2. For some reason, if I use DHCP at all then want to switch back to my
static IP setup, I have to
Hello out there.
Days ago I migrated my lab's box from FreeBSD 6.2-STABLE to
7.0-CURRENT/i386 due to my ZFS-desires.
Before the migration, I used successfully Xorg 7.2 and some very usefull
tools for astronomers, like 'Stellarium'.
Today I tried to install Stellarium out of the ports, the
Hi,
I am wondering is the option -R and -r are mutually recursive in
portupgrade.
That is, if the option -R applies to every ports detected by -r and
respectively if -r applies to every ports detected by -R.
Lest take the example of:
portupgrade -fRr gd
gd depends on png, does it upgrade png
Tom Evans wrote:
On Wed, 2007-07-04 at 07:59 +0200, Peter Boosten wrote:
Chad Perrin wrote:
I have a couple of niggling little, er, quirks that I'd like to get
sorted out on my FreeBSD Thinkpad.
2. For some reason, if I use DHCP at all then want to switch back to my
static IP setup, I
Eric Masson [EMAIL PROTECTED] writes:
Follow up to myself, sorry
The command asks for an ldap password that I type but, the result is :
ldap_bind: Invalid credentials (49).
I've double checked the password and reinitialized the ldap database,
but no change atm.
I've rebuilt all ports, with
On Wednesday 04 July 2007 09:35, Eric Masson wrote:
Thierry Lacoste [EMAIL PROTECTED] writes:
Hello,
I have a very similar setting on 6.1
Maybe you have an ACL problem (see below).
What does the following command give?
ldapsearch -x -D cn=testuser,ou=people,dc=interne,dc=example,dc=org
On Tue, 3 Jul 2007 22:05:50 -0600
Chad Perrin [EMAIL PROTECTED] wrote:
On Tue, Jul 03, 2007 at 11:41:13PM -0400, Robert Huff wrote:
Chad Perrin writes:
Isn't Perl part of the base system these days?
Perl has not been part of the base system for several years
and was
On Mon, 2007-07-02 at 12:44 -0400, Chuck Swiger wrote:
Norberto Meijome wrote:
On Fri, 29 Jun 2007 22:46:10 +0200
Momchil Ivanov [EMAIL PROTECTED] wrote:
4) Forget about the DSL router. Box with wireless NIC, 1 NIC for home net,
1
NIC for the DSL
- same as above, just have to
On Wed, 4 Jul 2007 15:56:13 +0700 (ICT)
Olivier Nicole [EMAIL PROTECTED] wrote:
Hi,
I am wondering is the option -R and -r are mutually recursive in
portupgrade.
That is, if the option -R applies to every ports detected by -r and
respectively if -r applies to every ports detected by -R.
On Wed, 2007-07-04 at 14:13 +0800, Zhang Weiwu wrote:
Dear list
Running FreeBSD-6.1 RELEASE on Thinkpad 380XD, I have been using this
notebook for many years (and used FreeBSD from 4.7 to 6.1). An ethernet
card is plugged on the first PCMCIA slot and I inserted my FC card
reader (PCMCIA
It depends on what you really want. If you don't want 64-bit version OS, I
don't think you'll have problems at all. Recently, my PC got fucked up, I've
changed the mother board, switched from 32 bit AMD Athlon to a 64 bit AMD
Turion, and successfully booted from the previously installed FreeBSD
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bill Campbell
Sent: Tuesday, July 03, 2007 9:36 AM
To: freebsd-questions@freebsd.org
Subject: Re: The worst error message in history belongs to... BIND9!
On Tue, Jul 03, 2007, Martin McCormick
Hello
I want to install the last stable release of FreeBSD Unix on my desktop machine
with AMD64 processor. Are there any differences in the FreeBSD ports for these
two platform: FreeBSD/i386 and amd64? In the FreeBSD handbook I saw a
workaround which should be applied to set up FreeBSD for
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, July 03, 2007 7:34 PM
To: [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Subject: Re: The worst error message in history belongs to... BIND9!
This is
Quoting Vladimir Tsvetkov [EMAIL PROTECTED]:
It depends on what you really want. If you don't want 64-bit version OS, I
don't think you'll have problems at all. Recently, my PC got fucked up, I've
changed the mother board, switched from 32 bit AMD Athlon to a 64 bit AMD
Turion, and successfully
Thanks a lot for your help. The link you pointed is enough for me. Thanks again
).
Regards
Yordan
-
С бензин в кръвта!
http://auto-motor-und-sport.bg/
___
freebsd-questions@freebsd.org
Can one run
'make clean'
in the /usr/ports directory in the hope of reducing disk space?
-Grant
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Hi...after I had nearly setup my localhost to enable sendmail on my
box, I got the message when I try to restart it:
restarting/var/run/sendmail.pid not found sendmail-clientmqueue
___
freebsd-questions@freebsd.org mailing list
Hello
I had the same problem a week ago...
sometimes the OO opens, but when I try to choose any menu
option it quits...
Installing only xorg 7.2 and openoffice it works...
when I removed the glib or gtk it works...
I have some problems with the glitz library too...
I am using FreeBSD 6.2
Dear Sirs
After I had nearly setup sendmail on my localhost I got the following
messages when I try to restart it:
#make restart
Starting: sendmail554 5.0.0 /etc/mail/sendmail.cf: line 66 unknown
configuration line
sendmail-clientmqueue-
On Wed, Jul 04, 2007 at 11:02:02AM -0400, Grant Peel wrote:
Can one run
'make clean'
in the /usr/ports directory in the hope of reducing disk space?
-Grant
Yes, you can, but it will take significant amount of time. Better
approach would be using portsclean (it's in portupgrade package)
Do the following:
cd /etc/mail
rm *.cf
make install
make start
Your sendmail.cf file is generated from a *.mc file in
that directory. It sounds like you have been editing
the sendmail.cf file directly which is not what your
supposed to be doing.
Ted
-Original Message-
From: [EMAIL
Hi everyone,
I'm working on FreeBSD 6.2 and my question is, it is possible to use the
periodic.conf file in /usr/local/etc/ directory ?
My second question, if i create a empty periodic.conf, it is possible to
include the /etc/defaults/periodic.conf file with a command line by example
On July 04, 2007 at 09:53AM Ted Mittelstaedt wrote:
[snip]
Actually perl has a lot of problems too. One of the biggest is that
perl script writers always seem to think like you, in that perl is
consistent across all platforms.
The biggest problems I've seen with perl scripts are when
On 7/4/07, Grant Peel [EMAIL PROTECTED] wrote:
Can one run
'make clean'
in the /usr/ports directory in the hope of reducing disk space?
portsclean -CDD
--
PGP KeyID: 0xC730A079
Key fingerprint
On Tuesday 03 July 2007 21:10:22 Olivier Nicole wrote:
Hi,
I am upgrading a remote server (very remote, 10,000 km) and I have no
way to access the machine in single user mode.
Is there a recommended way to do the upgrade from 5.5 to 6.2?
Do everything in multi-user, but kill all services
Pablo Mora writes:
Can one run
'make clean'
in the /usr/ports directory in the hope of reducing disk space?
portsclean -CDD
portsclean is part of the portupgrade port, not the base
system. Not everyone has it installed, or wants to.
To the original poster:
--On July 4, 2007 6:14:48 PM +0200 Olivier Regnier [EMAIL PROTECTED]
wrote:
Hi everyone,
I'm working on FreeBSD 6.2 and my question is, it is possible to use the
periodic.conf file in /usr/local/etc/ directory ?
Yes, of course.
My second question, if i create a empty periodic.conf, it is
Dear all,
I was told that my questions was better served here than in ports@
I've recently put my samba server in a jail, but as you can see @
http://www.faughnan.com/netbios.html NetBIOS is a bit of a problem and can
cause alot of headache. I was unable to find a nat helper for pf, so I was
On Wed, Jul 04, 2007 at 12:26:01PM +0100, RW wrote:
On Tue, 3 Jul 2007 22:05:50 -0600
Chad Perrin [EMAIL PROTECTED] wrote:
On Tue, Jul 03, 2007 at 11:41:13PM -0400, Robert Huff wrote:
Chad Perrin writes:
Isn't Perl part of the base system these days?
Perl has not
Good day all!
Please help me out with a really annoying little problem that bugs me
everytime I try to install applications from ports.
When I try to run portupgrade -a or portmanager -u,
when Make fetches the files from the servers, fetch
normally hangs randomly sometime through the
On Wed, Jul 04, 2007 at 09:50:18AM +0100, Tom Evans wrote:
On Wed, 2007-07-04 at 07:59 +0200, Peter Boosten wrote:
Chad Perrin wrote:
I have a couple of niggling little, er, quirks that I'd like to get
sorted out on my FreeBSD Thinkpad.
2. For some reason, if I use DHCP at all
Hi,
How to install a specific version of Python which is not the latest version?
Simon
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Paul Schmehl a écrit :
--On July 4, 2007 6:14:48 PM +0200 Olivier Regnier
[EMAIL PROTECTED] wrote:
Hi everyone,
I'm working on FreeBSD 6.2 and my question is, it is possible to use the
periodic.conf file in /usr/local/etc/ directory ?
Yes, of course.
My second question, if i create a
How far do we get to go back in time? From the first online fortran compiler:
ugh1 and ugh2. In fairness these were conditions that were not supposed to
happen, but somehow they always do. In more recent times I always liked,
invalid page fault this perhaps as late as win98.
On 04/07/07, Robert Huff [EMAIL PROTECTED] wrote:
Pablo Mora writes:
Can one run
'make clean'
in the /usr/ports directory in the hope of reducing disk space?
portsclean -CDD
portsclean is part of the portupgrade port, not the base
system. Not everyone has it
On 04/07/07, Olivier Nicole [EMAIL PROTECTED] wrote:
Hi,
I am wondering is the option -R and -r are mutually recursive in
portupgrade.
That is, if the option -R applies to every ports detected by -r and
respectively if -r applies to every ports detected by -R.
Lest take the example of:
On Wed, Jul 04, 2007 at 02:19:51PM -0500, [EMAIL PROTECTED] wrote:
On 04/07/07, Robert Huff [EMAIL PROTECTED] wrote:
Pablo Mora writes:
Can one run
'make clean'
in the /usr/ports directory in the hope of reducing disk space?
portsclean -CDD
portsclean is part
On 7/4/07, Jonathan Horne [EMAIL PROTECTED] wrote:
On Tuesday 03 July 2007 21:10:22 Olivier Nicole wrote:
Hi,
I am upgrading a remote server (very remote, 10,000 km) and I have no
way to access the machine in single user mode.
Is there a recommended way to do the upgrade from 5.5 to 6.2?
On Wed, 4 Jul 2007 22:44:34 +0300
Abdullah Ibn Hamad Al-Marri [EMAIL PROTECTED] wrote:
On 7/4/07, Jonathan Horne [EMAIL PROTECTED] wrote:
On Tuesday 03 July 2007 21:10:22 Olivier Nicole wrote:
Hi,
I am upgrading a remote server (very remote, 10,000 km) and I
have no way to access
Hi,
First, thanks for the help I got from this list when I was having problems
getting FreeBSD to install on a new system. Hard drive cabling was the
problem - got that fixed.
I have FreeBSD up and running now. I have a couple of questions. When I
installed FreeBSD, it automatically
Hi all
how can I use grep to have the output as 60.40.2.x
eg:
60.40.2.5
60.40.2.3
60.40.2.7
except 60.40.2x.x
eg:
60.40.20.5
60.40.23.6
60.40.25.7
Thank you
Park yourself in front of a
On Wed, Jul 04, 2007 at 04:16:47PM -0400, Lisa Casey wrote:
Hi,
First, thanks for the help I got from this list when I was having problems
getting FreeBSD to install on a new system. Hard drive cabling was the
problem - got that fixed.
I have FreeBSD up and running now. I have a couple of
On Wed, Jul 04, 2007 at 04:16:47PM -0400, Lisa Casey wrote:
First, thanks for the help I got from this list when I was having problems
getting FreeBSD to install on a new system. Hard drive cabling was the
problem - got that fixed.
Hardware problems can be a pain. :-)
I have FreeBSD up
Hi,
I installed Apache 2.2 and the appropriate mod_perl port for this
version of apache. However, it is not referenced in
/usr/local/etc/apache/httpd.conf. How do I get it there?
Andy
___
freebsd-questions@freebsd.org mailing list
Yordan Yordanov wrote:
Hello
I want to install the last stable release of FreeBSD Unix on my desktop machine
with AMD64 processor. Are there any differences in the FreeBSD ports for these
two platform: FreeBSD/i386 and amd64? In the FreeBSD handbook I saw a
workaround which should be
On Tue, Jul 03, 2007, Nejc Škoberne wrote:
I also tried to specify the ADSL IP address in named.conf (it is static),
but it is
still a no go. I don't have such problems with other daemons! Any ideas?
Is the interface already up when you are starting BIND? I guess it is
not. I haven't tested
Hi,
I'm wondering, does anyone here use WebGUI on their FreeBSD installs
and if so, or even if not would know, what is this
LoadModule apreq_module modules/mod_apreq2.so
mentioned in the installation text file? I can't seem to find it in
ports, this could simply mean that it's just not in
On Thu, 5 Jul 2007 02:34:16 +0800
Dinesh Pandian [EMAIL PROTECTED] wrote:
Good day all!
Please help me out with a really annoying little problem that bugs me
everytime I try to install applications from ports.
When I try to run portupgrade -a or portmanager -u,
when Make fetches the
This is pretty pathetic but I'm batting a 1000 on this one. I
installed mysql a few weeks ago on this web server I'm making for my
church and didn't do anything with it at that point (that was the
first mistake). I've not used mysql (I usually use PostgreSQL) but
WebGUI wants mysql. So, being
On Wednesday 04 July 2007, Simon Gao wrote:
Hi,
How to install a specific version of Python which is not the latest
version?
Simon
You can find version 2.3, 2.4 and 2.5 of Python in the ports tree.
Or you could simply add the package of the required version:
pkg_add -r python23
HTH,
Pieter
On Wednesday 04 July 2007, ann kok wrote:
Hi all
how can I use grep to have the output as 60.40.2.x
eg:
60.40.2.5
60.40.2.3
60.40.2.7
except 60.40.2x.x
eg:
60.40.20.5
60.40.23.6
60.40.25.7
Thank you
grep '60\.40\.2\.[0-9]*'
HTH,
Pieter de Goeje
On Wednesday 04 July 2007, Andrew Falanga wrote:
Hi,
I installed Apache 2.2 and the appropriate mod_perl port for this
version of apache. However, it is not referenced in
/usr/local/etc/apache/httpd.conf. How do I get it there?
Andy
[EMAIL PROTECTED]:/usr/ports/www/mod_perl2 cat
Warning to potential uses of the AllMusicConverter (
www.allmusicconverter.com http://www.allmusicconverter.com ). If you
are a software developer beware of this application as it disables the
debug environment, probably to prevent reverse engineering. This is
done with some other applications
ann kok wrote:
Hi all
how can I use grep to have the output as 60.40.2.x
eg:
60.40.2.5
60.40.2.3
60.40.2.7
except 60.40.2x.x
eg:
60.40.20.5
60.40.23.6
60.40.25.7
Thank you
how can I use grep to have the output as 60.40.2.x
eg:
60.40.2.5
60.40.2.3
60.40.2.7
except 60.40.2x.x
eg:
60.40.20.5
60.40.23.6
60.40.25.7
I don't know if you WANT to have 2x, or just 2., it would of been better
if you provided what you tried. Nonetheless, I've done both for
On July 04, 2007 at 06:00PM Andrew Falanga wrote:
This is pretty pathetic but I'm batting a 1000 on this one. I
installed mysql a few weeks ago on this web server I'm making for my
church and didn't do anything with it at that point (that was the
first mistake). I've not used mysql (I
--On July 4, 2007 4:00:48 PM -0600 Andrew Falanga [EMAIL PROTECTED]
wrote:
This is pretty pathetic but I'm batting a 1000 on this one. I
installed mysql a few weeks ago on this web server I'm making for my
church and didn't do anything with it at that point (that was the
first mistake). I've
On Wednesday 04 July 2007, Andrew Falanga wrote:
Hi,
I'm wondering, does anyone here use WebGUI on their FreeBSD installs
and if so, or even if not would know, what is this
LoadModule apreq_module modules/mod_apreq2.so
mentioned in the installation text file? I can't seem to find it in
ann kok wrote:
Hi all
how can I use grep to have the output as 60.40.2.x
eg:
60.40.2.5
60.40.2.3
60.40.2.7
except 60.40.2x.x
eg:
60.40.20.5
60.40.23.6
60.40.25.7
Thank you
Andrea Venturoli wrote:
Robert Huff wrote:
=?iso-8859-1?Q?Kyrre_Nyg=E5rd?= writes:
It has to be the worst written error message in history.
Not even close. I commend to you the Amiga's BSOD:
Software Guru
Meditation Number
On Wed, 4 Jul 2007, CyberLeo Kitsana wrote:
Andrea Venturoli wrote:
Robert Huff wrote:
=?iso-8859-1?Q?Kyrre_Nyg=E5rd?= writes:
It has to be the worst written error message in history.
Not even close. I commend to you the Amiga's BSOD:
Software Guru
I received permission to install a *nix at work. I installed FreeBSD 6.2; but
I am unable to cvsup successfully. I've tried the various modes. I've even
tried nesting it in a Python script that tries to get authorization through a
proxy -- it didn't help, but was worth a try.
I really,
Andrew Gould wrote:
I received permission to install a *nix at work. I installed FreeBSD 6.2; but
I am unable to cvsup successfully. I've tried the various modes. I've even
tried nesting it in a Python script that tries to get authorization through a
proxy -- it didn't help, but was worth
On 7/5/07, Andrew Gould [EMAIL PROTECTED] wrote:
I received permission to install a *nix at work. I installed FreeBSD 6.2;
but I am unable to cvsup successfully. I've tried the various modes. I've
even tried nesting it in a Python script that tries to get authorization
through a proxy -- it
Andrew Gould wrote:
I received permission to install a *nix at work. I installed FreeBSD 6.2; but
I am unable to cvsup successfully. I've tried the various modes. I've even
tried nesting it in a Python script that tries to get authorization through a
proxy -- it didn't help, but was worth
Eduardo Viruena Silva wrote:
On Wed, 4 Jul 2007, CyberLeo Kitsana wrote:
Andrea Venturoli wrote:
Robert Huff wrote:
=?iso-8859-1?Q?Kyrre_Nyg=E5rd?= writes:
It has to be the worst written error message in history.
Not even close. I commend to you the Amiga's BSOD:
If one is going to require the installation of something that may
not be part of a base system, that something might as well be bash :)
Except that bash requires all the icky GNU utilities to build so you
have to GNUify your system.
And perl doesn't? It was GPL last I knew.
The second
Hello, how do I fsck my disk if it's mounted?
I have downgraded the mount to read-only, but still geom seems
to disallow fsck access to it.
Is there a way to tell the system to allow fsck to open it
read/write?
thanks,
--
- Alfred Perlstein
___
- Original Message
From: cpghost [EMAIL PROTECTED]
To: Andrew Gould [EMAIL PROTECTED]
Cc: FreeBSD Questions Mailing List freebsd-questions@freebsd.org
Sent: Wednesday, July 4, 2007 6:56:34 PM
Subject: Re: If cvsup's a no-go, will copying work?
Andrew Gould wrote:
I received permission
On Wed, 4 Jul 2007 19:22:13 +0200
Gabor Tjong A Hung [EMAIL PROTECTED] wrote:
Dear all,
I was told that my questions was better served here than in ports@
I've recently put my samba server in a jail, but as you can see @
http://www.faughnan.com/netbios.html NetBIOS is a bit of a
Alfred Perlstein wrote:
Hello, how do I fsck my disk if it's mounted?
I have downgraded the mount to read-only, but still geom seems
to disallow fsck access to it.
Is there a way to tell the system to allow fsck to open it
read/write?
thanks,
If you unmount it first, you should be
Hi, I am trying to update amavisd-new from amavisd-new-2.4.5,1 to 2.5.1 on
our FreeBSD mail server, and it seems to require an update to file utility
and that requires gcc34 and i only have gcc 3.3.3 installed, when either the
script or me tries to build gcc34 from the ports collection, i get
To autostart mysql at boot add this to /etc/rc.conf
mysql_enable=YES
Add this to /etc/rc.conf to direct to use location where there is a large
enough free disk space
to hold your databases
mysql_dbdir=/usr/local/mysql
To start or stop mysql server do this
/usr/local/share/mysql/mysql.server
On Thu, Jul 05, 2007 at 01:49:47AM +0100, Joe Holden wrote:
Alfred Perlstein wrote:
Hello, how do I fsck my disk if it's mounted?
I have downgraded the mount to read-only, but still geom seems
to disallow fsck access to it.
Is there a way to tell the system to allow fsck to open it
Most FreeBSD kernels let you set a flag(?) to decide whether chflags
noschg will work in multi-user mode.
How do I do this w/ Mac OS X? Here's what happens when I do chflags
noschg in multi-user mode:
# chflags noschg test.txt
chflags: test.txt: Operation not permitted
The opposite, chflags
[EMAIL PROTECTED] wrote:
If one is going to require the installation of something that may
not be part of a base system, that something might as well be bash :)
Except that bash requires all the icky GNU utilities to build so you
have to GNUify your system.
And perl doesn't? It
On 04/07/07, Kelly Jones [EMAIL PROTECTED] wrote:
Most FreeBSD kernels let you set a flag(?) to decide whether chflags
noschg will work in multi-user mode.
How do I do this w/ Mac OS X? Here's what happens when I do chflags
noschg in multi-user mode:
# chflags noschg test.txt
chflags:
I also realize I can boot into single-user mode
(http://docs.info.apple.com/article.html?artnum=106388) where chflags
noschg works just fine, but I'd like to use noschg more as advisory
protection from myself, not something that requires single-user mode
to undo.
Too bad but the schg flag is
86 matches
Mail list logo
