After some extensive testing, I've come to the conclusion that Vinum
refuses to create any type of volume on the drive I'm having trouble
with. I'll create any number of volumes and/or additional plexes on the
second drive in the system successfully, only to have all the volumes
or plexes that
Hi all,
New to FBSD, and in the process of moving my Linux/Windows PC to
FBSD/Windows.
I got two spontaneous reboots last night (the first times it happened) and
I got fatal trap 12s in /var/log/messages each time. I wasn't doing
anything too heavy, just a make index make readmes on my ports,
The second trap has a somewhat different instruction pointer so I'll
include its info here.
/var/log/messages:
Oct 14 21:58:56 creadle /kernel: Fatal trap 12: page fault while in kernel
mode
Oct 14 21:58:56 creadle /kernel: fault virtual address = 0xe5d0
Oct 14 21:58:56 creadle /kernel:
On Wednesday, 15 October 2003 at 23:14:18 -0700, aarong wrote:
After some extensive testing, I've come to the conclusion that Vinum
refuses to create any type of volume on the drive I'm having trouble
with. I'll create any number of volumes and/or additional plexes on the
second drive in the
IIRC, using gmake instead of make will do it.
Boa sorte. :)
Augusto
On Thu, 2003-10-16 at 00:02, Márcio Conceição Goulart wrote:
I tried to compile xmule-1.6.1 from the source and get this error:
make: Cannot allocate memory
*** Error code 1
Stop in
On Thursday 16 October 2003 03:54 am, Matthias Pirstitz wrote:
Hi all,
I'm new to FreeBSD, so please bear with me :)
I have a Fujitsu Amilo-D notebook with a Radeon Mobility M9 card, and
when I try to start X, it crashes with Caught signal 11. Server
aborting.
There are no other error
This is one of the tests I referred to previously. Whether its a new
volume, or adding plexes to existing volumes, everything will run
flawlessly but always crash on reboot.
On Thursday, October 16, 2003, at 12:46 AM, Greg 'groggy' Lehey wrote:
If I could get a look at the log output, I might
On Wed, Oct 15, 2003 at 05:27:45PM -0400, C. Ulrich wrote:
On Tue, 2003-10-14 at 20:38, Kris Kennaway wrote:
On Tue, Oct 14, 2003 at 08:04:24PM -0400, C. Ulrich wrote:
My conundrum is this: I want to be able to use a Java (and perhaps
Flash) plugin with Firebird on my FreeBSD
On some of my systems I have found USB or other hardware being disabled
in BIOS. Check to be sure its enabled before you spend too much time
digging in FBSD as I did once.
Also might want to have a look at how your emailer is addressing the
from block for you. I would think that some spam
Jamie [EMAIL PROTECTED] wrote:
On Thu, 9 Oct 2003, [iso-8859-1] Florin Betivoiu wrote:
Hello.
I am trying to mount a floppy. Don't know what is it that I do wrong,
cause it doens't work... I have asked for help before, even here, but the
problem still is not solved :( .
I am using FreeBSD
Why not try changing out the cable and see if the problem persists?
Also Maxtor has a nice drive testing utility that runs from a bootable
floppy. And they work for all drive types...I use them on my WD and IBM
drives when I suspect trouble or before I bring an old HD out of
retirement.
Jason
I have never understood in which order are execurted the scripts which are
in /usr/local/etc/rc.d
most port applications like mysqld, cyrus-imapd, spamd etc. put their
startup scripts into /usr/local/etc/rc.d but they are not ordered by a
number attached before the script name (like the Unix
It looks like your messages.0 didn't properly compress when newsyslog
rolled the file. Probably due to the fact that your /tmp isn't big
enough to bzip a 196MB file. In any case your /var is now full which
will make anything that uses /var for storage not happy...my dhcp server
suffered this
On Thu, 16 Oct 2003, RJ45 wrote:
I have never understood in which order are execurted the scripts which are
in /usr/local/etc/rc.d
most port applications like mysqld, cyrus-imapd, spamd etc. put their
startup scripts into /usr/local/etc/rc.d but they are not ordered by a
number attached
This might not be related to your problem but on my Radeon 7000 VE I had
to disable DRI in the Modules section of the XF86Config to allow it to
work above 15bit
Although my error messages where slightly different and my X would
lockup rather than error out.
Also noted you are using th ati
Hi,
I've already tried the radeon driver and to disable dri and glx, to no
avail(sorry, I failed to mention that in my first post).
I don't seem to have a driver named svga, or did you mean vesa?(I
have already tried the vesa driver as well, but it made X crash in a way
where no more keyboard
Hi,
What is the quick way to disable console notifications? i.e. to stop the
kernel putting up messages?
Rgds
Rus
--
w: http://www.jvps.com | Virtual Dedicated Servers from $15/mo
e: [EMAIL PROTECTED]| Dontations made to Debian, FreeBSD
t: +44 7919 373537 | and Slackware
t:
Hi,
I have a question about uninstalling port.
Say, there are 5 applications -- A, B, C, D, E
Installing A depends on B,C,D, and E.
There is no problem that I type 'make install' under /usr/port/xxx/A
that the port system will help me install B,C,D,E since they are required by
application A.
You are looking for the 'sysutils/portupgrade' port. It installs a tool
called pkg_deinstall.
So to achieve what you described, you would run 'pkg_deinstall -R A'
and it would deinstall 'A' and any of its orphaned dependencies, ie.
B, C, D but not E.
Seeya...Q
On Thu, 2003-10-16 at 21:41,
On Wednesday 15 October 2003 11:44 pm, lawrencejr johnson wrote:
Hello,
I'm would like to install BSD on my old G3 Powerbook Laptop. Whare can I
find out How to do this, if it is possible ?
Try Darwin. FreeBSD is not running on the G's yet.
--
Rod
@ Home So No Cool Signature
Hi,
I'm really interested to know if a young, universitary student can become
a FreeBSD project committer. If the answer is positive how it's possible?
What skills are requested to become a FreeBSD committer? please give me
an answer
bye
krnlrookie
Im running several Freebsd systems some are rather old FBSD 4.6 but most
are at the 4.8rc1 level. anyway does the below procedure for updating a
Freebsd system seem like the correct way for both older and newer systems
??
any and all help is very appreciated
Thank you
On Mon, Oct 13, 2003 at 07:03:51PM +0200, [EMAIL PROTECTED] wrote:
I'm really interested to know if a young, universitary student can become
a FreeBSD project committer. If the answer is positive how it's possible?
What skills are requested to become a FreeBSD committer? please give me
an
Hello,
I just upgraded my ports tree and I'm running gnome 2.4 with mozilla 1.4. I logged in
as my
username (not root) and double clicked my mozilla icon (which was pointing to
/usr/X11R6/
bin/mozilla). 2 things I got confused is it gave me a dialog box saying which profile
to use (by
Konrad Heuer wrote:
On Thu, 16 Oct 2003, RJ45 wrote:
I have never understood in which order are execurted the scripts which are
in /usr/local/etc/rc.d
most port applications like mysqld, cyrus-imapd, spamd etc. put their
startup scripts into /usr/local/etc/rc.d but they are not ordered by a
Rus Foster wrote:
Hi,
What is the quick way to disable console notifications? i.e. to stop the
kernel putting up messages?
Rgds
Rus
I believe the correct method is:
Edit /etc/syslog.conf as desired.
HUP the syslog daemon (or reboot...)
Most of the hints you need are probably
in the file
jason dictos [EMAIL PROTECTED] writes:
Are there drivers in FreeBSD for TV Input tuner cards such as the winfast tv 2000
xp? (This may be an ATI oem board).
There are drivers for the Meteor and Brooktree chip sets.
I have no idea what that card uses.
Anthony Carmody [EMAIL PROTECTED] writes:
Running FreeBSD 5.1 on an Intel D45PESV mainboard. [onboard sound AC97
AC1981B]
Sounds fine. It's a technology preview release, remember, but it
should be pretty solid for your purposes.
i have no sound and i cannot browse my network machines in
[EMAIL PROTECTED] writes:
Makes sense so far.
Perhaps you wanted:
ipfw add 49 deny ip from any mac any 00:E0:18:F1:54:94 to any
?
I learn about ethfw, an utilisy which can solve my problem:
http://www.bsdshell.net/hut_ethfw.html
But when i compile my freebsd4.7 Release kernel and
Got another one this morning. This time the only thing running was the
make index make readmes, and XFree86.
Actually, they both may have finished by then, I started them up then had
to go to sleep, so I'm not entirely sure how far along it got in the
process. I do know it was past the index
There are a few VM fixes that have gone into RELENG_4, thats where your
kernel is really panicing. If its an option for you, I would try RELENG_4
rather than the security branch.
---Mike
At 09:48 AM 16/10/2003, Chris Readle wrote:
Got another one this morning. This time the only
Márcio Conceição Goulart [EMAIL PROTECTED] writes:
I tried to compile xmule-1.6.1 from the source and get this error:
make: Cannot allocate memory
*** Error code 1
Stop in /usr/home/marcio/downloads/pkgs/xmule/xmule-1.6.1/src.
*** Error code 1
Stop in
Lowell Gilbert wrote:
Anthony Carmody [EMAIL PROTECTED] writes:
Running FreeBSD 5.1 on an Intel D45PESV mainboard. [onboard sound AC97
AC1981B]
Sounds fine. It's a technology preview release, remember, but it
should be pretty solid for your purposes.
sure. and it's the 5th 5.1 machine i have
On Thu, Oct 16, 2003 at 08:54:46AM -0400, Monah Baki wrote:
I just upgraded my ports tree and I'm running gnome 2.4 with mozilla 1.4. I logged
in as my
username (not root) and double clicked my mozilla icon (which was pointing to
/usr/X11R6/
bin/mozilla). 2 things I got confused is it
Matthew Seaman wrote:
On Thu, Oct 16, 2003 at 08:54:46AM -0400, Monah Baki wrote:
I just upgraded my ports tree and I'm running gnome 2.4 with mozilla 1.4. I logged in as my
username (not root) and double clicked my mozilla icon (which was pointing to /usr/X11R6/
bin/mozilla). 2 things I got
I briefly tried RELENG_4 back when it was 4.9 RC1, and was getting hard
locks when I exited X. Unfortunately, at the time I didn't really have
time to troubleshoot it, so I rolled back to 4.8, which was only giving me
Sig 11's when exiting KDE apps like konsole knode. :)
Perhaps this weekend,
Hi:
I come form the Debian Linux world and would like to know how I can
information about packages for installation. I use prots to install
some, but many of them I just want to install binary files.
For eample, in Debian, I can use apt-cache search mozilla and this
will list all packages with
Hello,
Can anyone tell me if openoffice 1.1 (openoffice-devel) works with the native java
(diablo-jdk13)?
Matthew Faircliff
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Quoting Matthew Faircliff [EMAIL PROTECTED]:
Hello,
Can anyone tell me if openoffice 1.1 (openoffice-devel) works with the native
java (diablo-jdk13)?
Matthew Faircliff
___
[EMAIL PROTECTED] mailing list
Thank you for your reply.
I know there was a tool called portupgrade that can manage the ports very
well.
What I want to know is that if I do not use portupgrade, can 'make
deinstall' do what I expected ?
Thanks!
Michael Lee
- Original Message -
From: Q [EMAIL PROTECTED]
To: Michael
On Thu, Oct 16, 2003 at 07:59:00AM -0700, Dinesh Nadarajah wrote:
I come form the Debian Linux world and would like to know how I can
information about packages for installation. I use prots to install
some, but many of them I just want to install binary files.
Debian apt is certainly one of
On Thu, 16 Oct 2003 16:59:52 +, Matthew Faircliff
[EMAIL PROTECTED] said:
Hello,
Can anyone tell me if openoffice 1.1 (openoffice-devel) works with the
native java (diablo-jdk13)?
Matthew Faircliff
I don't know the answer, but would also appreciate one - perhaps slightly
more
My conundrum is this: I want to be able to use a Java (and perhaps
Flash) plugin with Firebird on my FreeBSD workstation.
One remark to flash: flash5 is supported by the
ports/www/flashpluginwrapper port. Flash6 support is yet to come on
FreeBSD 4.x (its still in the beta stage. You will find
On Thu, Oct 16, 2003 at 04:44:06PM +0100, Matthew Seaman wrote:
On Thu, Oct 16, 2003 at 07:59:00AM -0700, Dinesh Nadarajah wrote:
For eample, in Debian, I can use apt-cache search mozilla and this
will list all packages with mozilla in it and then I can select the
package for installation.
On Thu, Oct 16, 2003 at 05:01:21PM +0100, Jez Hancock wrote:
/ports/Tools/scripts/portsearch
Sorry should have been:
/usr/ports/Tools/scripts/portsearch
of course :|
--
Jez Hancock
- System Administrator / PHP Developer
http://munk.nu/
___
[EMAIL
(Posted to freebsd-isp on Tuesday, but got no responses)
Feel my pain :)
We have just begun a migration to NIS (please keep the NIS sucks,
Sendmail sucks, FreeBSD sucks, You suck, I suck, etc posts to a
dull roar.)
In the last couple of days we have seen a lot of messages like the one
below
i need to know where can i download the newest freebsd from, i do not have a
unix system, but i will, and i wanna know the site that i can DL it from .
On 16 Oct 2003 at 4:01, Mailing Lists Catcher wrote:
Doesn't seem like you had an answer to this...
What source are you looking for
i need to know where can i download the newest freebsd from, i do not
have a unix system, but i will, and i wanna know the site that i can
DL it from .
* Obtaining FreeBSD (all can be answered here):
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mirrors.html
--
-jg.
In the last episode (Oct 16), Adam Maloney said:
In the last couple of days we have seen a lot of messages like the
one below appearing in /var/log/messages:
Oct 13 06:14:58 x ypserv[45883]: access to master.passwd.byname denied -- client
1.2.3.4:3458 not privileged
This goes on for
Brent Bailey wrote:
###
Backup /etc:
# cp -Rp /etc /etc.old
This may not do what you think it does, and it may not
do what you want. Links copied as files, etc.
Use tar or cpio.
___
[EMAIL PROTECTED] mailing list
Hi,
[I've read this several times before I posted, It's really
confusing...even to me...sorry. Sendmail just kicks my butt every time
I need to configure it.]
I may have brought this up before, but I just can't seem to find an
acceptable answer anywhere.
I have a home network, with 2 FreeBSD
Hi
I am trying to install the 5.1Release and i am havin problems with ACPI
these is the message:
ACPI autoload failed - inappropiated file type or format
Fatal Trap 12 : page fault while in kernel mode
Fault virtual address = 0x240
Fault code = supervisor read, page not present
stack pointer
I guess what FreeBSD needs is a good port of the apt system Should not
be difficult. It can let pkg_xxx do all the installing etc. Would be
cool if one existed :)
-D
--- Jez Hancock [EMAIL PROTECTED] wrote:
On Thu, Oct 16, 2003 at 05:01:21PM +0100, Jez Hancock wrote:
Hi, folks.
I've got a 2.2.2 machine which I can't currently upgrade, due to funding
issues. This machine handles a lot of mail, and I am lately finding
dmesg output to be full of file: table is full messages, and entries
like these in the sendmail log:
SYSERR(UID0): readqf: cannot open
Is there an existant utility (script) that captures the output
of grep -n and, using vi then presents the user with the list of
files that are brought at the first point where the string was
seen. E.g, if I'm recursively searching for the string ncount
On Thu, Oct 16, 2003 at 09:55:49AM -0700, Dinesh Nadarajah wrote:
I guess what FreeBSD needs is a good port of the apt system Should not
be difficult. It can let pkg_xxx do all the installing etc. Would be
cool if one existed :)
I believe that is spelt 'fink' in certain corners of the *BSD
anyone know why my Mozilla 1.4 has no spell check in mail?
am i missing something here?
Yep - 1.4 doesn't come with the spell checker! It is included with
1.4.1 or 1.5, though.
- d.
___
[EMAIL PROTECTED] mailing list
+-- Nuno Teixeira [freebsd] [16-10-03 01:54 IST]:
| Hello to all,
|
| I'm having a lot of problems with my ISP smtp server and I decided to find a smtp
service but for what I see it is rare to find one. You can find a lot of pop3 services
but few smtp ones.
|
| I found one smtp.com but it is a
On Thursday 16 October 2003 07:09 am, Matthew Seaman wrote:
On Thu, Oct 16, 2003 at 08:54:46AM -0400, Monah Baki wrote:
I just upgraded my ports tree and I'm running gnome 2.4 with
mozilla 1.4. I logged in as my username (not root) and double
clicked my mozilla icon (which was pointing to
I as recently approached by a client of mine who is running (very happily so)
a FreeBSD machine as a small-business server (using samba for file/print
sharing, squid for proxy gateway, email, mySQL, and a few others). The
machine more than services the 50 or so people using it, and maintains
On Thu, 16 Oct 2003 18:58:15 +
Nathan Vidican [EMAIL PROTECTED] wrote:
They have recently bought into an application software which
requires IBM's DB2 database back-end; it has been proposed that
they install a second server running linux explicitly for the
purpose of running IBM's DB2
On Thursday 16 October 2003 09:03 am, Jez Hancock wrote:
On Thu, Oct 16, 2003 at 05:01:21PM +0100, Jez Hancock wrote:
/ports/Tools/scripts/portsearch
Sorry should have been:
/usr/ports/Tools/scripts/portsearch
of course :|
I like this one. I used to use the make search option, which I
whereis pkgname
eg.
[EMAIL PROTECTED]:~]$ whereis bash2
bash2: /usr/ports/shells/bash2
[EMAIL PROTECTED]:~]$
On Thu, Oct 16, 2003 at 07:59:00AM -0700, Dinesh Nadarajah wrote:
Hi:
I come form the Debian Linux world and would like to know how I can
information about packages for installation.
On Thu, Oct 16, 2003 at 09:55:49AM -0700, Dinesh Nadarajah wrote:
I guess what FreeBSD needs is a good port of the apt system Should not
be difficult. It can let pkg_xxx do all the installing etc. Would be
cool if one existed :)
Packages should work normaly, but can give some trouble afther
On Thu, Oct 16, 2003 at 10:18:56AM -0700, Gary Kline wrote:
Is there an existant utility (script) that captures the output
of grep -n and, using vi then presents the user with the list of
files that are brought at the first point where the string was
seen. E.g, if
Hi,
Does anybody out there have a pointer on how to obtain a crash dump
under FreeBSD? (e.g. when the box panics and I end up in gdb)
TIA for your help
-ewald
___
[EMAIL PROTECTED] mailing list
Hello,
I have PNP ISA modem, programe pnpinfo write out:
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID MOT1580 (0x8015f435), Serial Number 0x19647968
PnP Version 1.0, Vendor Version 0
Device Description: Motorola Premier 33.6 Internal
Logical Device ID: MOT1580 0x8015f435
On Thu, Oct 16, 2003 at 10:18:56AM -0700, Gary Kline wrote:
Is there an existant utility (script) that captures the output
of grep -n and, using vi then presents the user with the list of
files that are brought at the first point where the string was
seen. E.g, if
Pelase help me what should i do whit these messsage in the installing process
ACPI autoload failed - inappropiated file type or format
Fatal Trap 12 : page fault while in kernel mode
Fault virtual address = 0x240
Fault code = supervisor read, page not present
stack pointer =0x10:0xc0ae3cf4
frame
Here's a link to the relevant section of the FAQ. Unfortuneately, I
haven;t build a debugging kernel yet so I cannot go into further detail,
but no doubt someone else on the list can.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/advanced.html#KERNEL-PANIC-TROUBLESHOOTING
chris
---
..I am a little confused about tape devices in FreeBSD.
Under the /dev directory...I have the following tape devices:
# ls *sa*
ersa0 esa0.1 nrsa0.3 rsa0.0 sa0.1
ersa0.0 esa0.2 nsa0rsa0.1 sa0.2
ersa0.1 esa0.3
Hi there!
I found many interesting Linux programs on sourceforge.net and other sites,
but they're not in the ports collection. So I thought I'll port some of these
to FreeBSD. However, I'm still pretty new to FreeBSD and I never ported
anything.
I can't even compile most of the programs on my
Daniela wrote:
Hi there!
I found many interesting Linux programs on sourceforge.net and other sites,
but they're not in the ports collection. So I thought I'll port some of these
to FreeBSD. However, I'm still pretty new to FreeBSD and I never ported
anything.
I can't even compile most of
On Thursday, October 16, 2003, at 06:11 PM, Daniela wrote:
I found many interesting Linux programs on sourceforge.net and other
sites,
but they're not in the ports collection. So I thought I'll port some
of these
to FreeBSD. However, I'm still pretty new to FreeBSD and I never ported
anything.
On 2003-10-16 10:18, Gary Kline [EMAIL PROTECTED] wrote:
Is there an existant utility (script) that captures the output of
grep -n and, using vi then presents the user with the list of files
that are brought at the first point where the string was seen.
E.g, if I'm recursively searching for
in message [EMAIL PROTECTED],
wrote Michael Lee thusly...
Say, there are 5 applications -- A, B, C, D, E
Installing A depends on B,C,D, and E.
...
Supposed that E was also required by another application F which
was already installed in the system, I wonder if I type 'make
deinstall' under
On Thu, Oct 16, 2003 at 04:44:17PM -0400, Charles Swiger wrote:
On Thursday, October 16, 2003, at 06:11 PM, Daniela wrote:
snip
I can't even compile most of the programs on my system, and I'm almost
sure it
has to do with dependencies in 99% of all cases. How do I find out
what
Hi,
I found many interesting Linux programs on sourceforge.net and other sites,
but they're not in the ports collection. So I thought I'll port some of these
to FreeBSD. However, I'm still pretty new to FreeBSD and I never ported
anything.
I can't even compile most of the programs on my
in message [EMAIL PROTECTED],
wrote Jez Hancock thusly...
On Thu, Oct 16, 2003 at 04:44:06PM +0100, Matthew Seaman wrote:
On Thu, Oct 16, 2003 at 07:59:00AM -0700, Dinesh Nadarajah wrote:
For eample, in Debian, I can use apt-cache search mozilla and this
will list all packages with
Michael Lee [EMAIL PROTECTED] writes:
What I want to know is that if I do not use portupgrade, can 'make
deinstall' do what I expected ?
If the port hasn't been modified (e.g., by cvsup'ing ports) since it
was installed, yes. Otherwise, you will need to do a pkg_delete(1).
The prblem is that mozilla takes a heck of a long time to compile on my
machine and all I want to do is browse the web. :) Oh well. :)
-D
--- Alex de Kruijff [EMAIL PROTECTED] wrote:
On Thu, Oct 16, 2003 at 09:55:49AM -0700, Dinesh Nadarajah wrote:
I guess what FreeBSD needs is a good port of
On Thu, Oct 16, 2003 at 11:45:44PM +0300, Giorgos Keramidas wrote:
On 2003-10-16 10:18, Gary Kline [EMAIL PROTECTED] wrote:
Is there an existant utility (script) that captures the output of
grep -n and, using vi then presents the user with the list of files
that are brought at the first
Ok, the last problem I was experiencing when the console would just
freeze while the kernel was attempting to do the nfs mount was due to a
firewall rule. At least, that's what I gathered after scrolling through
a tcpdump capture. I don't have the message handy, but it seemed to
have been
Hello
I've written an OpenSSL plugin for gaim that allows gaim to use the
OpenSSL libraries that come installed with FreeBSD. Gaim is a GPL
application, OpenSSL is BSD licensed, and apparently there are license
issues to deal with as a result.
http://www.openssl.org/support/faq.html#LEGAL2
Dinesh Nadarajah [EMAIL PROTECTED] writes:
The prblem is that mozilla takes a heck of a long time to compile on my
machine and all I want to do is browse the web. :) Oh well. :)
Won't pkg_add -r mozilla do it?
___
[EMAIL PROTECTED] mailing list
On Wed, 2003-10-15 at 22:01, Rod Person wrote:
On Thursday 16 October 2003 03:54 am, Matthias Pirstitz wrote:
Hi all,
I'm new to FreeBSD, so please bear with me :)
I have a Fujitsu Amilo-D notebook with a Radeon Mobility M9 card, and
when I try to start X, it crashes with Caught
On Thursday, October 16, 2003, at 07:09 PM, Matthew Luckie wrote:
I've written an OpenSSL plugin for gaim that allows gaim to use the
OpenSSL libraries that come installed with FreeBSD. Gaim is a GPL
application, OpenSSL is BSD licensed, and apparently there are license
issues to deal with as
First off, I'm somewhat of a newbie; sorry if this is daft...
I have been trying to get gtk-gnutella cvs to compile
with some new (internationalization) functions, using
ICU. Neither of the versions currently in ports
(devel/icu devel/icu2) work; version 2.6.1 passes
configure tests for gtk-g,
I'd assume NetBSD is more mature than Darwin, so I'd go with NetBSD instead..
Kind regards,
Alex.
Quoting Rod Person [EMAIL PROTECTED]:
On Wednesday 15 October 2003 11:44 pm, lawrencejr johnson wrote:
Hello,
I'm would like to install BSD on my old G3 Powerbook Laptop. Whare can I
find
On Thu, Oct 16, 2003 at 07:59:00AM -0700, Dinesh Nadarajah wrote:
stating that it could not download package ftp://../mozilla.tgz.
Is there a better way to find what ackages are available for
installation?
I've been getting such good use from these Dru Lavigne articles that I
feel
Quoting Nathan Vidican [EMAIL PROTECTED]:
Can someone run IBm's DB2 for Linux, on a FreeBSD box? If so, will it
maintain stability even if at the loss of some performance versus running it
on an actual Linux box? Does anyone have any experience with this, and/or has
anyone out there
Hello,
What config file is responsible for the rotation of logs? I have a logfile I need to
rotate every 24 hours (it's not squid's). Thanks in advance.
chael
___
[EMAIL PROTECTED] mailing list
On Thu, 2003-10-16 at 23:04, [EMAIL PROTECTED] wrote:
Hello,
What config file is responsible for the rotation of logs? I have a logfile I need to
rotate every 24 hours (it's not squid's). Thanks in advance.
/etc/newsyslog.conf is used for general logfile rotation. newsyslog is
run from
Hi,
Remove the line
#*.err;kern.debug;auth.notice;mail.crit /dev/console
from /etc/syslog.conf
OR
redirect it to a file
*.err;kern.debug;auth.notice;mail.crit /var/log/console.log
Regards
SSR
From: Rus Foster [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Disable console
are you looking for /etc/newsyslog.conf ?
-
Gil Agno Virtucio
Janitor/Collector/Messenger
NEC System Integration and Construction Philippines Inc.
15th Floor BPI Buendia Center
Gil Puyat Ave. Makati City 1200
Cellphone : +639163989695
Office
Hi,
Run sysctl -w kern.maxfiles= to what ever value is needed. To get it
updated at startup you can put a line like kern.maxfiles= in
/etc/sysctl.conf to have the change on every reboot. You may also have to
edit /etc/login.conf and adjust any openfiles= lines that might be
Hi,
/etc/newsyslog.conf is the file you need.
For eg.
If you need a file rotated monthly on the first day of the month.
/var/log/MYLOGFILE 600 12* $M1D0 Z
Regards
SSR
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: logfile rotate
Date: Fri, 17 Oct 2003 11:04:10 +0800
Hello,
What
Is there a way to test bandwidth with a free bsd box?
Dan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
In the last episode (Oct 17), DanB said:
Is there a way to test bandwidth with a free bsd box?
Sure. Check out ports/benchmarks/netperf.
--
Dan Nelson
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
Is there a way to test bandwidth with a free bsd box?
There a some utilities in the ports tree to test the network speed, but you
can also use your favorite browser in your favorite X shell, to check the
DSL/Cable speed. www.dslreports.comm/tools
1 - 100 of 101 matches
Mail list logo
