hrm, thanks, but this doesn't seem to work:
`ifconfig xl0 down` doesn't do anything... executes without error, but the
interface stays up.
`/sbin/dhclient` gets a new IP, but doesn't re-do the firewall with new
IP, so everything is broken.
echo nameserver 123.34.45.67 /etc/resolv.conf
Hello,
I purchased a RocketRaid card + 3 disks, and moved my FreeBSD 6.1 to it
using dump, I then changed my fstab
entry to use da0s1d for /, I made sure that the it is bootable, I told
my raid controller to be bootable, I set it up to boot in my BIOS as the
first device, I added the kernel
hrm... ?
Doing it again:
twa0: INFO: (0x04: 0x000B): Rebuild started: unit=0
twa0: ERROR: (0x04: 0x003A): Drive power on reset detected: port=0
twa0: ERROR: (0x04: 0x003A): Drive power on reset detected: port=1
twa0: ERROR: (0x04: 0x003A): Drive power on reset detected: port=0
twa0: ERROR:
Thanks for pointing it out.
And oh.. btw, if it's fixed, then would I be able
to install it by doing a portsnap fetch portsnap update
and then running portupgrade -a ?
Thanks.
On 5/8/07, Julien Gabel [EMAIL PROTECTED] wrote:
This server is close to deployment so I can't afford to
Thanks Dan!
Commenting out USE_GMAKE in the Makefile
solved it!
Regards,
Dinesh
On 5/8/07, Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (May 08), Julien Gabel said:
This server is close to deployment so I can't afford to reinstall.
I get the following error when I try to
Hello,
Can you help me by suggesting what I need to do when I want to use
freebsd-update fetch (FBSD 6.2) but get the following message:
The following files are affected by updates, but no changes have
been downloaded because the files have been modified locally:
/etc/rc.d/jail
Now, I do not
Installation of Firebird2-server on FreeBSD 6.2-STABLE is giving me so
much grief
When I just do `make`, it fails with the following:
cut
== Please do not build firebird as 'root' because this may cause conflicts
with SysV semaphores of running services.
*** Error code 1
Stop in
I am trying to install databases/firebird2-server, but the process keeps
failing with:
cut
== Please do not build firebird as 'root' because this may cause conflicts
with SysV semaphores of running services.
*** Error code 1
Stop in /usr/ports/databases/firebird2-client.
*** Error code 1
Stop
On Tue, 2007-05-08 at 19:17 -0500, Paul Schmehl wrote:
--On May 8, 2007 6:15:52 PM -0500 Jonathan Horne [EMAIL PROTECTED] wrote:
anyone out there running dual monitors in FreeBSD?
Of course.
if so, what is your setup? single display adapter/2 heads, or 2
seperate adapters?
Hi again,
Tnx for your further recommendations. I'll take the following actions:
1) I'll report the IP addresses to Spamcop and Spamhaus (note that
indeed it appears to be virus-driven, or operated through backdoors,
as the server is under constant attack, coming from a variety of IP
Compliant Company Demonstration:
Take advantage of your Entity
Join us for a Webinar on May 9
Bring your LLC, S-C corp, Non-profit, LLP or LP into compliance in all 51
Jurisdictions.
Create a Compliant Company or Corporation.
Maintain Compliance in all 51
On Tue, May 08, 2007 at 07:17:45PM -0500, Paul Schmehl wrote:
I'm using ATI Radeon X300, but the setup was quite simple. One monitor
section. One device section. One screen section.
Section ServerLayout
Identifier X.org Configured
Screen 0 Screen0 0 0
Hi,
I tried to reduce the MTU of a network interface on a remote FreeBSD 6.2
machine.
So that means changing this line in rc.conf:
ifconfig_bge0=inet xxx.xxx.xxx.xxx netmask 255.255.255.128
to
ifconfig_bge0=inet xxx.xxx.xxx.xxx netmask 255.255.255.128 mtu 1472
Of course, there's a real IP
On 09/05/2007, at 8:31 PM, Bram Schoenmakers wrote:
Hi,
I tried to reduce the MTU of a network interface on a remote
FreeBSD 6.2
machine.
So that means changing this line in rc.conf:
ifconfig_bge0=inet xxx.xxx.xxx.xxx netmask 255.255.255.128
to
ifconfig_bge0=inet xxx.xxx.xxx.xxx
FreeBSD boots by default from the a-partition and IMK you can't change
this. Try to setup your rootdev as disk0s1a instead of disk0s1d and it
will work.
Regards
Frank
___
freebsd-questions@freebsd.org mailing list
Op woensdag 09 mei 2007, schreef Sam Lawrance:
Hi,
Could someone please point out where I made the mistake?
When your network interface went down, you lost the connection, your
shell lost the terminal and your script was terminated before it
could finish doing what it was supposed to.
Frank Wissmann wrote:
FreeBSD boots by default from the a-partition and IMK you can't change
this. Try to setup your rootdev as disk0s1a instead of disk0s1d and it
will work.
Regards
Frank
How can I do that? When I use sysinstall to create my partitions it
automatically create's it as
Gabriel Rossetti wrote:
Frank Wissmann wrote:
FreeBSD boots by default from the a-partition and IMK you can't change
this. Try to setup your rootdev as disk0s1a instead of disk0s1d and it
will work.
Regards
Frank
How can I do that? When I use sysinstall to create my partitions
Bram Schoenmakers wrote:
Op woensdag 09 mei 2007, schreef Sam Lawrance:
Hi,
Could someone please point out where I made the mistake?
When your network interface went down, you lost the connection, your
shell lost the terminal and your script was terminated before it
could finish doing
I'm planning a new fileserver for my post-production facility and need some
input regarding filesystems and network setup. I've been a FreeBSD fan for
almost 10 years now and will try to build this server based on the latest
stable FreeBSD version, allthough most machines here run WinXP.
We have
On Tue, 8 May 2007 16:11:21 -0500
Jack Barnett [EMAIL PROTECTED] wrote:
I have a script that updates some dynamic DNS records (can be run as
non-root if needed).
It needs to be run on startup - after network is configured and after
rc.firewall (it'll get blocked if it's run before the
Op woensdag 09 mei 2007, schreef Sam Lawrance:
Hi,
Could someone please point out where I made the mistake?
When your network interface went down, you lost the connection, your
shell lost the terminal and your script was terminated before it
could finish doing what it was
-BEGIN PGP SIGNED MESSAGE-
Hash: RIPEMD160
Gabriel Rossetti wrote:
Frank Wissmann wrote:
FreeBSD boots by default from the a-partition and IMK you can't change
this. Try to setup your rootdev as disk0s1a instead of disk0s1d and it
will work.
Regards
Frank
How can I do that? When
Hi,
Does FreeBSD 6.2 support Quad-Core Intel Xeon 5310 CPU and an Intel Xeon
5320 quad core CPU
Regards,
Ivan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2007-05-09 08:21, Andreas Widerøe Andersen wrote:
I'm planning a new fileserver for my post-production facility and need some
input regarding filesystems and network setup. I've been a FreeBSD fan for
almost 10 years now and will try to build
Well, I think if you boot your computer from a cdrom and edit with
bsdlabel you get into an editor where you can change the d into an a.
That must be the solution you want.
Regards
Frank
___
freebsd-questions@freebsd.org mailing list
On Wed, May 09, 2007, Bram Schoenmakers wrote:
But as I said, I ran the script from a screen session, so that makes me
wonder
why the execution was aborted.
But is running '/etc/rc.d/netif restart'' known to cause problems? I think I
shouldn't have to use scripts like these just to
As can be seen in my screenshot:
http://img.photobucket.com/albums/v709/TKou/screenshots/mozfonts.jpg,
since upgrading to the 2.0 versions of Firefox and now Thunderbird the
interface font sizes for those applications have become much larger than
any of my other gtk applications, and they seem
Matthew Seaman wrote:
Gabriel Rossetti wrote:
How can I do that? When I use sysinstall to create my partitions it
automatically create's it as da0s1d.
Use:
bsdlabel -e da0s1
There's also a trick you can use in sysinstall. It will only ever
assign an a partition to /. So if you
But as I said, I ran the script from a screen session, so that makes me
wonder
why the execution was aborted.
But is running '/etc/rc.d/netif restart'' known to cause problems? I think
I
shouldn't have to use scripts like these just to change a setting on the
network interface.
Kind
On 5/9/07, Chris Slothouber [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2007-05-09 08:21, Andreas Widerøe Andersen wrote:
I'm planning a new fileserver for my post-production facility and need
some
input regarding filesystems and network setup. I've been a
Having googled over and over and tried the various suggestions without
success, I am forced to ask here:
How does one install databases/firebird2-\* in FreeBSD? I am running
6.2-STABLE.
Thanks!
-Wash
http://www.netmeister.org/news/learn2quote.html
DISCLAIMER: See
On 5/9/07, Odhiambo Washington [EMAIL PROTECTED] wrote:
Having googled over and over and tried the various suggestions without
success, I am forced to ask here:
How does one install databases/firebird2-\* in FreeBSD? I am running
6.2-STABLE.
Thanks!
-Wash
On Wed, 2007-04-11 at 14:52 -0400, Bob Johnson wrote:
On 4/10/07, Jonathan McKeown [EMAIL PROTECTED] wrote:
On Monday 09 April 2007 17:37, Martin Hudec wrote:
Siju George wrote:
How Do you actually Identify what process is listening on a TCP/IP port?
nmap does not usually give the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2007-05-09 10:12, Andreas Widerøe Andersen wrote:
On 5/9/07, Chris Slothouber [EMAIL PROTECTED] wrote:
On 2007-05-09 08:21, Andreas Widerøe Andersen wrote:
I'm planning a new fileserver for my post-production facility and need
some
input
Frank Wissmann wrote:
Well, I think if you boot your computer from a cdrom and edit with
bsdlabel you get into an editor where you can change the d into an a.
That must be the solution you want.
Regards
Frank
___
freebsd-questions@freebsd.org
Alex Zbyslaw wrote:
Matthew Seaman wrote:
Gabriel Rossetti wrote:
How can I do that? When I use sysinstall to create my partitions it
automatically create's it as da0s1d.
Use:
bsdlabel -e da0s1
There's also a trick you can use in sysinstall. It will only ever
assign an a partition
Hello
I looking for a solution where I can add a file to each outgoing mails which my
sendmail sends out. Can I do that with MimeDefang? I need this for special
solution. Any hints are welcome.
--
Regards,
Martin Schweizer
[EMAIL PROTECTED]
PC-Service M. Schweizer GmbH; Bannholzstrasse
* On 09/05/07 10:26 -0400, Schiz0 wrote:
| On 5/9/07, Odhiambo Washington [EMAIL PROTECTED] wrote:
|
| Having googled over and over and tried the various suggestions without
| success, I am forced to ask here:
|
| How does one install databases/firebird2-\* in FreeBSD? I am running
| 6.2-STABLE.
On 5/7/07, Marcelo Maraboli [EMAIL PROTECTED] wrote:
I can´t seem to make scponly work with a chrooted jail. I´ve
read many articles on how FREEBSD´s scripts on making jails
really don´t work and a manual mknod of $jail/dev/null must
be done, but it still does´t work...
I´d appreciate any help
45MB/sec is too fast for GigE?
Wha?
On 5/9/07, Chris Slothouber [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2007-05-09 08:21, Andreas Widerøe Andersen wrote:
I'm planning a new fileserver for my post-production facility and need
some
input regarding
Chris: Accept my fallin on my sword..I didnt see your reply before I sent.
;)
On 5/9/07, Chris Slothouber [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2007-05-09 10:12, Andreas Widerøe Andersen wrote:
On 5/9/07, Chris Slothouber [EMAIL PROTECTED] wrote:
On
On 09/05/07, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Gary Kline
Sent: Tuesday, May 08, 2007 7:19 PM
To: [EMAIL PROTECTED]
Cc: Gary Kline; FreeBSD Mailing List
Subject: Re: Another slightly OT q...
The _main_ think I can think of, is windows in a SINGLE threaded movement of
data via CIFS, is gonna limit you to about 17MB/sec.
Andreas..have you tested this via CIFS/Redirector and been able to sustain
the performance that you need before going with Samba (another performance
layer issue)
On
At 23:22 08/05/2007, you wrote:
see: http://nl.wikipedia.org/wiki/Jan_Sloot
about the Sloot Digital Coding System. great stuff.
Danke.
that seems to be German, in Dutch Bedankt would be appropiate. i
appreciate the effort though.
I found the english wkik entry so I could
At 19:05 08/05/2007, you wrote:
Hey Guys,
Does anybody have any websites where I can look up the latest
in compression technology? I've got a very thin ISDL link
so pulling streams over is like looking at postage-stamp images.
Depends on what you are trying to
I'm using an Apple MacBook Pro, and i was wondering if there's any
howto on installing FreeBSD 6.2 and/or 7 on that machine.
The only documentation i was able to find is for Macbook, but none seems to
exist for the pro version.
Does anyone of you had luck with FreeBSD on the pro version?
At 14:21 09/05/2007, you wrote:
I'm planning a new fileserver for my post-production facility and need some
input regarding filesystems and network setup. I've been a FreeBSD fan for
almost 10 years now and will try to build this server based on the latest
stable FreeBSD version, allthough most
On Wed, May 09, 2007 at 07:50:02PM +0200, Eduardo Morras wrote:
At 23:22 08/05/2007, you wrote:
he died / killed himself / was murdered before his hoax could be uncovered.
It's easily covered. Check usenet comp.compression faq. It's the Counting
Theorem. For a sequence of n-bits there are
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On May 9, 2007, at 10:52 AM, Martin Schweizer wrote:
I looking for a solution where I can add a file to each outgoing
mails which my
sendmail sends out. Can I do that with MimeDefang? I need this for
special
solution. Any hints are welcome.
I asked somebody directly, but I may as well ask the entire list.
I'm looking for a video-card. The more recent mobo's (like the
i815) have them builtin. My 750MHz machine uses the SRAM for
its v-RAM. My old Kayaks came with Matrox Millennium 8MB video
On Wed, May 09, 2007 at 03:09:09PM -0700, Gary Kline wrote:
I asked somebody directly, but I may as well ask the entire list.
I'm looking for a video-card. The more recent mobo's (like the
i815) have them builtin. My 750MHz machine uses the SRAM for
its v-RAM. My
Hello,
When I ssh into FreeBSD hosts without allocating a tty, sshd segfaults
after the process terminates. This problem occurs on both 6_1_REL and
6_2_REL installations at all sorts of patch levels.
Examples:
Client: `ssh -t server ls`
Server Logs:
| May 9 15:33:44 server sshd[1503]:
AFAIK, the Macbook information will work exactly the same on a Pro
model. There's no real core-level differences between the Pro and
non-Pro systems.
On May 9, 2007, at 1:12 PMMay 9, 2007, George Iordanou wrote:
I'm using an Apple MacBook Pro, and i was wondering if there's any
howto on
Ivan Carey wrote:
Hi,
Does FreeBSD 6.2 support Quad-Core Intel Xeon 5310 CPU and an Intel Xeon 5320
quad core CPU
Regards,
Ivan
Yes.
--
Thanks,
Josh Paetzel
___
freebsd-questions@freebsd.org mailing list
On May 9, 2007, at 6:09 PMMay 9, 2007, Gary Kline wrote:
On Wed, May 09, 2007 at 03:09:09PM -0700, Gary Kline wrote:
I asked somebody directly, but I may as well ask the entire list.
I'm looking for a video-card. The more recent mobo's (like the
i815) have them
Here's another round of dumb questions for ya:
Can USB jump drives be used to back-up a Samba share?
If so, what do I need to do to prepare the USB drive
to accept files?
Since I don't really need to compress or encrypt, I
was thinking about simply copying the entire directory
tree using the cp
L Goodwin [EMAIL PROTECTED] wrote:
Here's another round of dumb questions for ya:
Can USB jump drives be used to back-up a Samba share?
If so, what do I need to do to prepare the USB drive
to accept files?
Since I don't really need to compress or encrypt, I
was thinking about simply
Thanks, Bill!
--- Bill Moran [EMAIL PROTECTED] wrote:
L Goodwin [EMAIL PROTECTED] wrote:
Here's another round of dumb questions for ya:
Can USB jump drives be used to back-up a Samba
share?
If so, what do I need to do to prepare the USB
drive
to accept files?
Since I don't
Op woensdag 09 mei 2007, schreef Sam Lawrance:
Hi,
Could someone please point out where I made the mistake?
When your network interface went down, you lost the connection, your
shell lost the terminal and your script was terminated before it
could finish doing what it was supposed to.
On Wed, May 09, 2007 at 07:18:52PM -0500, Eric Crist wrote:
On May 9, 2007, at 6:09 PMMay 9, 2007, Gary Kline wrote:
On Wed, May 09, 2007 at 03:09:09PM -0700, Gary Kline wrote:
I asked somebody directly, but I may as well ask the entire list.
I'm looking for a video-card. The
On Wed, May 09, 2007 at 06:34:53PM -0700, Gary Kline wrote:
PS: Does anybody know of a website that 'splains VGA, SVGA,
EVGA, and all the rest? I've been seriously guilty of being
lazy; I'm fessing up!
Wikipedia, believe it or not, has tons of great
On Wed, May 09, 2007 at 07:48:00PM -0600, Chad Perrin wrote:
On Wed, May 09, 2007 at 06:34:53PM -0700, Gary Kline wrote:
PS: Does anybody know of a website that 'splains VGA, SVGA,
EVGA, and all the rest? I've been seriously guilty of being
lazy; I'm fessing up!
On May 9, 2007, at 8:34 PMMay 9, 2007, Gary Kline wrote:
On Wed, May 09, 2007 at 07:18:52PM -0500, Eric Crist wrote:
Gary,
Most cards that might come with DVI output instead of the standard
VGA output usually include at least one DVI-VGA adapter, an
additional one could be purchased at most
(rc.firewall uses this to get network info:
onet=`ifconfig xl0 | grep inet | awk '{print $6}'`
oip=`ifconfig xl0 | grep inet | awk '{print $2}'` Meaning,
rc.firewall would also have to be re-ran if the IP is new).
[also to make things more complicated, I think I need a
From: Gary Kline [EMAIL PROTECTED]
On Wed, May 09, 2007 at 07:18:52PM -0500, Eric Crist wrote:
On May 9, 2007, at 6:09 PMMay 9, 2007, Gary Kline wrote:
On Wed, May 09, 2007 at 03:09:09PM -0700, Gary Kline wrote:
I asked somebody directly, but I may as well ask the entire list.
I'm looking
Eric Crist wrote:
On May 9, 2007, at 8:34 PMMay 9, 2007, Gary Kline wrote:
On Wed, May 09, 2007 at 07:18:52PM -0500, Eric Crist wrote:
Gary,
Most cards that might come with DVI output instead of the standard
VGA output usually include at least one DVI-VGA adapter, an
additional one could be
On 2007-05-09 19:14, Eric Crist [EMAIL PROTECTED] wrote:
AFAIK, the Macbook information will work exactly the same on a Pro
model. There's no real core-level differences between the Pro and
non-Pro systems.
Thanks a lot Eric.
You are probably right, the main differences between the two
68 matches
Mail list logo
