Gestur A. Grjetarsson wrote:
Hi
I'm having a problem installing freebsd on an ibm blade
the problem I face is that during boot, it always stops in OK prompt with the message
can't load 'kernel'
[...]
can anyone point me out... it seems that when I try type in
load /boot/kernel/kernel
I
Hi All,
I have a problem with FreeBSD 6 -Stable, i built the machine with
-RELEASE and it's been running fine for the last few weeks.. Today i
tryed to make the jump to -STABLE by running cvsup on the RELENG_6
branch, running makebuildworld/kernel
which built fine without any errors.. upon
Hi,
Thank you all.
I did install on another machine and shifted the HDD to the old machine.
Initially it didn't work. With the help of the archives and mails from you
people I could solve the issue.
Now it is up and running :)
On 11/9/05, Chuck Swiger [EMAIL PROTECTED] wrote:
Vulpes Velox
On Tue, 25 Oct 2005 15:58:01 +0200
Roland Smith [EMAIL PROTECTED] wrote:
On Tue, Oct 25, 2005 at 07:09:05PM +0530, Jayesh Jayan wrote:
an update to the issue.
the error what i get is
panic : page fault
Cannnot Dump. No dump device defined.
Automatic reboot in 15 seconds - press a
On Tue, 25 Oct 2005 22:17:02 +0530
Jayesh Jayan [EMAIL PROTECTED] wrote:
Hi,
If i install FreeBSD on to a HDD with a good machine where i have
already installed freebsd before and then move the HDD to that
machine.
Will it work ??
Provided that it has everything it needs in the kernel
Vulpes Velox wrote:
On Tue, 25 Oct 2005 15:58:01 +0200
Roland Smith [EMAIL PROTECTED] wrote:
[ ... ]
One thing you could try is to burn a 6.0-RC1 CD and try that. Test
your memory with memtest86 (http://www.memtest86.com/).
Memtest86 does not tell you if you have bad ram. It just indicates
Hi,
I am having problem with installing freebsd on my old HP Pavillion PC. The
below is the configuration of the pc.
AMD K6 2 550 MHz
10 GB Maxtor HDD
Sony CD RW
64 MB sd ram
It is having phoenix BIOS 4.0 release 6.0 B
I am using freebsd 5.4 cd's to install.
I am able to create partitions
an update to the issue.
the error what i get is
panic : page fault
Cannnot Dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
On 10/25/05, Jayesh Jayan [EMAIL PROTECTED] wrote:
Hi,
I am having problem with installing freebsd on my old HP
connected to it.
On 10/25/05, Nicholas Lozinsky [EMAIL PROTECTED] wrote:
an update to the issue.
the error what i get is
panic : page fault
Cannnot Dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
I am having problem with installing
, it's hard to diagnose
the problem.
One thing you could try is to burn a 6.0-RC1 CD and try that. Test your
memory with memtest86 (http://www.memtest86.com/).
On 10/25/05, Jayesh Jayan [EMAIL PROTECTED] wrote:
Hi,
I am having problem with installing freebsd on my old HP Pavillion PC
Hi all. I've got a problem and I'm not sure if this is an xorg
problem or a freebsd problem or a bit of both. I've currently got an Epia
SP13000 running Freebsd 5.3 and I'm trying to configure it for
Xwindows. Well, the kicker is, it uses the newer Via Unicrome pro graphics
chip
, Jayesh Jayan [EMAIL PROTECTED] wrote:
Hi,
I am having problem with installing freebsd on my old HP Pavillion PC.
The
below is the configuration of the pc.
AMD K6 2 550 MHz
10 GB Maxtor HDD
Sony CD RW
64 MB sd ram
It is having phoenix BIOS 4.0 release 6.0 B
Jayesh Jayan wrote:
If i install FreeBSD on to a HDD with a good machine where i have already
installed freebsd before and then move the HDD to that machine.
Will it work ??
Yes, probably, that's definitely a decent idea and worth a try.
This is what happens when I try to install freebsd on
Thank you
I will try it out and let you know the output :)
But it is not a proper thing to do .
anyhow will give it a try
On 10/25/05, Chuck Swiger [EMAIL PROTECTED] wrote:
Jayesh Jayan wrote:
If i install FreeBSD on to a HDD with a good machine where i have
already
If you are having some problems with net-snmp in FreeBSD-4.10:
- Don't use latest net-snmp from sourceforge.
- Use the /usr/ports/net-mgmt/net-snmp4/ which is the original UCD-SNMP
package.
- Use also the mrtg package which comes with ports.
Now, I can already monitor my DSL link!
--
--
Edwin D.
HI!
I have laptop HP nx6125 with sound card Conexant amc audio on board.
OS FreeBSD 6.0 RC1 amd64.
After dmesg you can see:
pci0: multimedia,audio at device 20.5 (no driver attached).
This HW is probably not suported in FreeBSD,but producent writes,the sound card
is Sound Blaster
Hi,everyone.
I met a very strange net problem in FreeBSD 5.4,it disturbed me very
long time,i like freebsd very much,but if this problem can't be
resolved,i have to give up it.:(
The problem is just like this:
My server box located in the education network at China(this is a
special net work
At 07:12 PM 7/24/2005, he ccjj wrote:
Hi,everyone.
I met a very strange net problem in FreeBSD 5.4,it disturbed me very
long time,i like freebsd very much,but if this problem can't be
resolved,i have to give up it.:(
The problem is just like this:
My server box located in the education network
, points to same IP) it works.
Ideas?! Thanks :)
P.S I didn't have this problem on FreeBSD 4.11. Sendmail hasn't be
touched. Also some other info:
metro# cat resolv.conf
domain dalegroup.net
nameserver 10.0.0.1
metro# cat hosts
::1 localhost.dalegroup.net localhost
127.0.0.1
Hi,
I'm trying to setup my Card Dwl-G520 in FreeBSD 5.4 and not working.
I try:
kldload if_ath.ko
and dmesg output is:
ath0: Atheros 5212 mem 0xff7f-0xff7f irq 21 at device 0.0 on pci6
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6
error:
HAL
I want to install freebsd maybe as a replacement for (gentoo) linux (on
the long term), but I am experiencing some problems.
The booting process (kernel) of the installation media just halts.
I've tried with acpi off but this didn't help.
I thin it has something to do with ata/ide
Verbose
hello , i have problem when i boot with freebsd 5.3 since i have had a power
cut .The message of the error is :
error 16 Iba 191
No /boot/loader
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot: error 16 Iba 191
No /kernel
I don't know if the hard disk is endommaged but i don't think.How do
On 03/14/05 16:15:14, cell wrote:
hello , i have problem when i boot with freebsd 5.3 since i have had
a
power cut .The message of the error is :
error 16 Iba 191
No /boot/loader
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot: error 16 Iba 191
No /kernel
I don't know if the hard disk is
On Tue, 25 Jan 2005 18:20:26 -0800, Derrick Ryalls wrote
I am running FreeBSD 5.3 Release on a AMD Athlon 2800+ with Linux
compatibility installed. I have just installed Linux-EnemyTerritory
from ports and I tried to run it: ./et in
/usr/compat/linux/usr/games/et .
I then get this
I run ET on 5.2.1-RELEASE and didn't have to do anything else than
installing nvidia-driver and downloading the game (linux version)
Jorn Argelo wrote:
On Tue, 25 Jan 2005 18:20:26 -0800, Derrick Ryalls wrote
I am running FreeBSD 5.3 Release on a AMD Athlon 2800+ with Linux
compatibility
On Mon, 24 Jan 2005 18:04:56 -0500, Kevin Coles wrote
Hello,
I am running FreeBSD 5.3 Release on a AMD Athlon 2800+ with Linux
compatibility installed. I have just installed Linux-EnemyTerritory
from ports and I tried to run it: ./et in
/usr/compat/linux/usr/games/et .
I then get this error
I am running FreeBSD 5.3 Release on a AMD Athlon 2800+ with Linux
compatibility installed. I have just installed Linux-EnemyTerritory
from ports and I tried to run it: ./et in
/usr/compat/linux/usr/games/et .
I then get this error message:
...loading libGL.so.1: QGL_Init: dlopen
Hello,
I am running FreeBSD 5.3 Release on a AMD Athlon 2800+ with Linux
compatibility installed. I have just installed Linux-EnemyTerritory
from ports and I tried to run it: ./et in
/usr/compat/linux/usr/games/et .
I then get this error message:
...loading libGL.so.1: QGL_Init: dlopen
well, you might wanna try to install the following port:
graphics/linux_mesa3
i dunno if FreeBSD has such a thing, for now im using
the debian.org package search interface for finding which library is part of
which archive...
Greetings
Oliver Leitner
Technical Staff
http://www.shells.at
On
I am searching for the 'sane' scanner package.
In my browser, i did
www.freebsd.org -- ported applications
-- search 'sane' 'all' 'submit'
i got a page with (among others) sane-frontends,
sane-backends,
when i click on the Package link (for sane-backends)
i get an error '550 No such
Things worked fine until last upgrade (this morning). Now I get the following
errors:
pc1# !?upgr
portupgrade -ra
Updating the ports index ... Generating INDEX.tmp - please
wait..tkscanfax-1.02: /usr/ports/japanese/tk80 non-existent -- dependency
list incomplete
=== comms/tkscanfax failed
***
[EMAIL PROTECTED] wrote:
Things worked fine until last upgrade (this morning). Now I get the following
errors:
pc1# !?upgr
portupgrade -ra
Updating the ports index ... Generating INDEX.tmp - please wait..tkscanfax-1.02:
/usr/ports/japanese/tk80 non-existent -- dependency list incomplete
Ok thanks for the detail response. I guess my confusion came from several
places - the handbook explicity gives an example where you can refuse
ports that aren't relevant to your environment (i refuse several such as
japanese, chinese)...
Can you explain (if you know off hand) why make
[EMAIL PROTECTED] wrote:
Ok thanks for the detail response. I guess my confusion came from several
places - the handbook explicity gives an example where you can refuse
ports that aren't relevant to your environment (i refuse several such as
japanese, chinese)...
Hmm. I wonder if we should
Yes, I did use ipfw before. Now I've moved over to 5.3-RC1 and PF
though, gre works like a charm on that config.
On Sun, 24 Oct 2004 18:40:42 +0200, Martin Schweizer
[EMAIL PROTECTED] wrote:
Hello Erik
I use pptpd with GRE without problems. First I had also troubles with the ipfw
but now
Hello Erik
I use pptpd with GRE without problems. First I had also troubles with the ipfw
but now it works great. Do you use also ipfw?
Am Thu, Oct 21, 2004 at 04:09:39PM +0200 Erik Mossberg schrieb:
Hello,
I have a weird problem with a GRE tunnel, the setup is as follows;
gre0:
Hello,
I have a weird problem with a GRE tunnel, the setup is as follows;
gre0: flags=b051UP,POINTOPOINT,RUNNING,LINK0,LINK1,MULTICAST
mtu
1476
tunnel inet 213.67.20.137 -- 194.145.248.113
inet 194.145.248.138 -- 194.145.248.137 netmask 0xfffc
And I've tried
Disregard my post/thread.
Found a typo in my /etc/dhclient.conf. Fixed it problem went away.
thx
On Wednesday 29 September 2004 10:53 pm, Eric Schuele wrote:
Hello,
I'm not sure who to go to with this. I managed to get everything
installed the way I like it on my Dell laptop...
Hello,
I'm not sure who to go to with this. I managed to get everything installed
the way I like it on my Dell laptop... including the miniPCI WLAN adapter
using the NDIS wrapper for Windows Drivers.
It appears to work flawlessly when I am within range of a WAP... but when I am
at the
On 06 Sep Pedro n/a wrote:
In the first time I rebooted my computer, after I've finished the
installation of this version, my motherboard started to beep and I didn't
know what to do.
After reseting the computer I realized that I could no longer boot my
Windows. I did selected it from
[EMAIL PROTECTED] wrote:
On 06 Sep Pedro n/a wrote:
In the first time I rebooted my computer, after I've finished the
installation of this version, my motherboard started to beep and
I
didn't know what to do. After reseting the computer I realized
that
I could no longer boot my Windows. I did
On 06 Sep JJB wrote:
I experienced the same thing w/ beta-2
Just *before* putting an image back I discovered that beta-2 had
*changed* the LBA setting of my harddrive to another value.
Putting this back (manualy forcing the bios into using LBA), my
windows came back on.. Pfftt..
Def
: Re: MBR problem with FreeBSD 5.3 beta
Pedro n/a wrote:
In the first time I rebooted my computer, after I've finished the
installation of this version, my motherboard started to beep and I
didn't know what to do.
After reseting the computer I realized that I could no longer boot
my
, September 06, 2004 9:15 PM
To: jason
Cc: [EMAIL PROTECTED]
Subject: Re: MBR problem with FreeBSD 5.3 beta
Ok,
I just reinstalled the my win boot device and obviously,
windows
started to run again... although the horrible beep problem happens
everytime I reboot my pc from FreeBSD (whenever I boot my
PROTECTED]; jason [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, September 06, 2004 11:01 PM
Subject: RE: MBR problem with FreeBSD 5.3 beta
Pedro
I do not understand what you mean by
I just reinstalled the my win boot device and obviously, windows
started to run again.
What is a win boot
, September 06, 2004 9:15 PM
To: jason
Cc: [EMAIL PROTECTED]
Subject: Re: MBR problem with FreeBSD 5.3 beta
Ok,
I just reinstalled the my win boot device and obviously,
windows
started to run again... although the horrible beep problem happens
everytime I reboot my pc from FreeBSD (whenever
In the first time I rebooted my computer, after I've finished the
installation of this version, my motherboard started to beep and I didn't
know what to do.
After reseting the computer I realized that I could no longer boot my
Windows. I did selected it from BootMng and it gave no response.
Pedro n/a wrote:
In the first time I rebooted my computer, after I've finished the
installation of this version, my motherboard started to beep and I
didn't know what to do.
After reseting the computer I realized that I could no longer boot
my Windows. I did selected it from BootMng and it gave
On Tuesday 27 July 2004 01:09 am, Sikander Abbasi wrote:
Dear sir,
thanking you for your reply
I am using freebsd 5.2 cdrom installing,it give
errorwhen it start installing file system, error, max
one fat partition allow.
with regards
Sikander Abbasi
Are you having FreeBSD install a fat
Dear Sir,
I am new to freebsd i am having problem installing
freebsd, when i tried to install it say max one fat
partition,
i have 2 fat primary partition and keep 5 gd 1
partition for installing freebsd.
plz help me in this
with regards
sikander Abbasi
On Monday 26 July 2004 10:29 am, Sikander Abbasi wrote:
Dear Sir,
I am new to freebsd i am having problem installing
freebsd, when i tried to install it say max one fat
partition,
i have 2 fat primary partition and keep 5 gd 1
partition for installing freebsd.
plz help me
On Thu, 27 May 2004, Senandung Mendonan wrote:
On Thu, 27 May 2004, Gautham Ganapathy wrote:
I have installed 5.2.1-RELEASE on my system (Athlon XP/nForce 2
Ultra/GeForce 3). Unfortunately, I am not able to use nVidia's fbsd
drivers. I saw a few posts that mentioned it would work under
Hi,
I have installed 5.2.1-RELEASE on my system (Athlon XP/nForce 2
Ultra/GeForce 3). Unfortunately, I am not able to use nVidia's fbsd drivers.
I saw a few posts that mentioned it would work under fbsd-5 although it was
written for 4. Any idea on what might be the problem?
The initial bootup
On Thu, 27 May 2004, Gautham Ganapathy wrote:
I have installed 5.2.1-RELEASE on my system (Athlon XP/nForce 2
Ultra/GeForce 3). Unfortunately, I am not able to use nVidia's fbsd
drivers. I saw a few posts that mentioned it would work under fbsd-5
although it was written for 4. Any idea on what
PROTECTED]
Sent: Friday, May 07, 2004 7:47 AM
Subject: RE: Problem with FreeBSD 4.8, ipf, ipfnat and forwarding for
pcAnywhere
For your telnet test to pcanywhere ports on target Lan pc to work
you have to tell telnet on the target to listen on those ports.
I believe pcanywhere is one of those
adp wrote:
I am using telnet just to see if the port accepts connections. That test
works fine internally. We are not running a telnet server. Also, we are
telnetting to the pcAnywhere port, not the telnet port. :)
I've only historical experience with PCAnywhere, nowadays sticking with
VNC
pcanywhere to work on and you should be good to go.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of adp
Sent: Friday, May 07, 2004 12:37 AM
To: [EMAIL PROTECTED]
Subject: Problem with FreeBSD 4.8, ipf, ipfnat and forwarding for
pcAnywhere
This shouldn't
On Thu, May 06, 2004 at 11:37:09PM -0500, adp wrote:
And I am allowing in accessing via ipf:
pass in quick proto tcp from any to public-ip port = 5631 group 200
pass in quick proto udp from any to public-ip port = 5631 group 200
pass in quick proto tcp from any to public-ip port = 5632 group
This shouldn't be that hard, but I can't get it working.
I have a FreeBSD firewall with three NICs (Internet, LAN, DMZ). I have
bridging enabled between the Internet and DMZ interfaces.
I now have an internal computer (LAN) that needs to be accessible via
pcAnywhere.
I can telnet to the
If my system access to /dev/mem while I listen to music with xmms or other... th e
music listen bad, why? how I can to fix this? Thx.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Hi,
I have 1 primary partition, containing 4 extended partitions. Mandrake Linux 9.2 is
installed over there. Using fdisk in FreeBSD installer, I created another primary
partition and tried installing FreeBSD 5.2.1 there.
Unfortunately, the installation process got hung while the
Dear sir/madam,
i had a problem on installing freebsd 5.;2
my hardware specification is as follow:
P4 1.8G
INTEL I850E(mother board)
2X256RDRAM(800)
GEFORCE 3 TI200
AUDIGY(sound card)
2XWD800JB (hard disk)
ADAPTEC 29160N SCSI CARD
IBM 9G SCSI HARDDISK(WINXP pro installed)
QUANTUM 9G SCSI
hi all,
make buildkernel KERNCONF=FREESBIEKERNEL
-the kernel-
#
# FREESBIEKERNEL
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is
Zh Zhechev wrote:
hi all,
make buildkernel KERNCONF=FREESBIEKERNEL
The error comes while compiling umass. From your kernel conf:
device umass # Disks/Mass storage - Requires scbus and da
and from higher up in the same file:
## SCSI peripherals
#device scbus
Hello freebsd-questions,
I have one problem with system. Always after rebooting it says that
file systems was uncorrectly unmounted and i have no way to recovery
system without reinstallation. Can you help with solving this
problem? May be problem is in compatibility with processor
On Fri, 2 Jan 2004, orlandina wrote:
Hello freebsd-questions,
I have one problem with system. Always after rebooting it says that
file systems was uncorrectly unmounted and i have no way to recovery
system without reinstallation. Can you help with solving this
problem? May be
orlandina wrote:
Hello freebsd-questions,
I have one problem with system. Always after rebooting it says that
file systems was uncorrectly unmounted and i have no way to recovery
system without reinstallation. Can you help with solving this
problem? May be problem is in compatibility with
Hi, Sir:
I have a problem with installing some applications in FreeBSD (4.8 Release) on pentium
iii 866 computer, such as java run time for linux from SUN, and Solaris 7 for linux
from SUN. I got the following message and the installation aborted.
# ./so-7-ga-eval-bin-linux-en.bin
ELF
ELF is a format for executable binary files. The error means that module
is missing. Try locate ld-linux.so.2. I get:
locate ld-linux.so.2
/usr/compat/linux/lib/ld-linux.so.2
The module is a part of the linux_base package. If you have
linux_base-x.x installed, perhaps it was deleted somehow.
--- doug [EMAIL PROTECTED] wrote:
ELF is a format for executable binary files. The
error means that module
is missing. Try locate ld-linux.so.2. I get:
locate ld-linux.so.2
/usr/compat/linux/lib/ld-linux.so.2
The module is a part of the linux_base package. If
you have
linux_base-x.x
On Mon, 8 Dec 2003 08:57:02 +1300
Shen Zhijian [EMAIL PROTECTED] wrote:
Hi, Sir:
I have a problem with installing some applications in FreeBSD (4.8 Release) on
pentium iii 866 computer, such as java run time for linux from SUN, and
Solaris 7 for linux from SUN. I got the following message
Justin;
Did you ever get yppasswd working?
Thank you,
Susan Daane
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
that. Now its working. It
really is not a problem with my FreeBSD LAN card or
other configurations. It's the WindowsXP trick!
-edwin
--- Josh Paetzel [EMAIL PROTECTED] wrote:
On Thu, Sep 18, 2003 at 10:04:15AM -0700, Edwin D.
Vinas wrote:
hi josh,
see dmesg, ifconfig and netstat below... hope
the
following: pci0 (vendor=0x1106 dev=0x3059) at 17.5 irq 5.
By the way, this machine where FreeBSD is installed also has WinXP which works
fine when in Windows. So Im sure my LAN card is really ok. It's only a problem of
FreeBSD.
What should I do? I don't want to make FreeBSD
I was in the /usr/src directory .
On 11 Oct 2003 10:07:06 -0400, Lowell Gilbert wrote:
Shrikant [EMAIL PROTECTED] writes:
Hello ,
I am trying to apply the latest patch for Openssh FreeBSD-SA-03:15.openssh
In past i had applied all the patches but never came before such
Hello ,
I am trying to apply the latest patch for Openssh FreeBSD-SA-03:15.openssh
In past i had applied all the patches but never came before such question File to
patch:
can any body suggest me whihc file it is asking for .I have given the output below
Shrikant
server1# patch
Shrikant [EMAIL PROTECTED] writes:
Hello ,
I am trying to apply the latest patch for Openssh FreeBSD-SA-03:15.openssh
In past i had applied all the patches but never came before such question File to
patch:
can any body suggest me whihc file it is asking for .I have given the output
, 2003 9:15 AM
Subject: Re: Problem installing FreeBSD in M754LMR Motherboard.
Guillermo Fuentes [EMAIL PROTECTED] writes:
I did the minimal installation posible for 4.8 and when I reboot the
kernel
shows me the same error.
Oh, well. I think you'll have to install an earlier version
: [EMAIL PROTECTED]
Sent: Sunday, October 05, 2003 4:20 PM
Subject: Re: Problem installing FreeBSD in M754LMR Motherboard.
Guillermo Fuentes [EMAIL PROTECTED] writes:
Hello there,
This is the fisrt time I'm trying to install FreeBSD. I really like the
project and I decided to study
Guillermo Fuentes [EMAIL PROTECTED] writes:
I did the minimal installation posible for 4.8 and when I reboot the kernel
shows me the same error.
Oh, well. I think you'll have to install an earlier version and
update from there; just make sure to leave out the kernel AGP support
when you build
Guillermo Fuentes [EMAIL PROTECTED] writes:
Hello there,
This is the fisrt time I'm trying to install FreeBSD. I really like the
project and I decided to study it and learn from it.
I have not been able to install it in my PC:
Motherboard: M754LMR (http://www.pcchips.com.tw/M754LMR.html):
Hello there,
This is the fisrt time I'm trying to install FreeBSD. I really like the
project and I decided to study it and learn from it.
I have not been able to install it in my PC:
Motherboard: M754LMR (http://www.pcchips.com.tw/M754LMR.html):
Video adapter (onboard): NVIDIDA Aladdin TNT2
Hi,
I'm running FreeBSD 5.1-RELEASE-p8 on a Pentium II with SCSI adapter
..kernel: ahc0: Adaptec 2940 Ultra SCSI adapter port 0xb800-0xb8ff mem
0xe280-0xe2800fff irq 10 at device 11.0 on pci0
..kernel: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
and with the following tape:
Sorin Chiorean wrote:
Can anybody tell me how can I turn on hardware compression for this tape
unit or what can I do to be able to buck up more then 4Gb ??
See
) at 17.5 irq 5.
By the way, this machine where FreeBSD is installed also has WinXP which works fine
when in Windows. So Im sure my LAN card is really ok. It's only a problem of FreeBSD.
What should I do? I don't want to make FreeBSD machine as my Internet sharing server
as of now (although its
sharing server. The dmesg shows the
following: pci0 unknown card (vendor=0x1106 dev=0x3059) at 17.5 irq 5.
By the way, this machine where FreeBSD is installed also has WinXP which works fine
when in Windows. So Im sure my LAN card is really ok. It's only a problem of FreeBSD.
What
a problem of FreeBSD.
What should I do? I don't want to make FreeBSD machine as my Internet sharing server
as of now (although its the best option). Im testing/running a Unix program that
needs to be connected to the Internet via Windows XP gateway.
Please help me make my FreeBSD
Hi!
I tried (many many times) to install Freebsd in my IBM laptop and I had this problem:
the laptop doesnt have a floppy drive, it only have one hd and one dvd drive. So, I
configured the BIOS to boot from DVD drive, then HD. when I turned the laptop on with
the BSD cd rom on it, it started
Anyone else had this problem?
All of my Freebsd boxes 4.6-4.8 connect to my Solaris 8 NIS servers with
out any troubles. They are able to authenticate and get all the maps
that they need in order to operate. However, I have never been able to
change my NIS password from them. Eventhough
In the last episode (Jun 25), Justin Burdine said:
Anyone else had this problem?
All of my Freebsd boxes 4.6-4.8 connect to my Solaris 8 NIS servers
with out any troubles. They are able to authenticate and get all the
maps that they need in order to operate. However, I have never been
Dan Nelson wrote:
What error do you get?
I get the same error that was mentioned in the posting below. I get it
when I run as either root or user.
#yppasswd burdine
Changing NIS password for burdine on zan.
Old Password:
yppasswd: sorry
When I went parusing through the source I found where
I've attempted to install FreeBSD 4.7 on an a new HP computer (734n) with an
AMD Athlon XP 2400. In doing so, I ran across a few problems. They are
detailed below:
FYI: I installed using the ALL option.
1. On execution of startx:
Error Message: Could not lookup internet address for . This
On Tue, 21 Jan 2003, Curtis, Brian A.--ORISE wrote:
Subject: Problem with FreeBSD 4.7-RELEASE after installation
I've attempted to install FreeBSD 4.7 on an a new HP computer (734n) with an
AMD Athlon XP 2400. In doing so, I ran across a few problems. They are
detailed below:
FYI: I
Matthew Seaman [EMAIL PROTECTED] writes:
of yesterday, so I think you've unfortunately bought an unsupported
motherboard. Try asking your vendor if they will swap it for an
alternative model --- I think the Asus P4B533 is supported, and that
looks compatible with the rest of your components.
On Sat, Nov 23, 2002 at 11:59:10PM +0100, TooManySecrets wrote:
I've a SIS 648 MAX motherboard, whit the SIS648 driver, a Seagate 80Gb 7200
rpm hard drive, Creative nvidia Ti4400 and a Pentium 4 2'4Mhz with 533 fsb.
Well, when I try to install freebsd in it, I obtain this message:
ad0:
That is the thread about my question with Kent.
TooManySecrets wrote:
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very happy with it. But my
problem is now, when I change my pc hardware.
That is the thread about my question with Kent.
TooManySecrets wrote:
El Sáb 23 Nov 2002 23:17, escribió:
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices...
Hola Manuel,
Are you using ATA-100 or ATA-133 cables to hook your Maxtor to the SIS
motherboard. Don't connect
On 2002-11-24 14:00, TooManySecrets [EMAIL PROTECTED] wrote:
That is the thread about my question with Kent.
TooManySecrets wrote:
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very happy with it. But my
problem is now, when I change my pc hardware.
I've a SIS 648 MAX motherboard, whit the SIS648 driver, a Seagate 80Gb 7200
On Sat, Nov 23, 2002 at 11:59:10PM +0100, TooManySecrets wrote:
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very happy with it. But my
problem is now, when I change my pc hardware.
I've
101 - 200 of 206 matches
Mail list logo