* Rapid City, South Dakota USA
sendmail_enable=YES means it sends and recieves
sendmail_enable=NO means it sends only
sendmail_enable=NONE means it is completely disabled
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
directory, not /etc.
So, now I am trying to run -
crontab crontab
in my non-root user directory, as the non-root user, and it fails with this-
crontab: crontab: No such file or directory
I tried -
crontab -u chip crontab -e (with and without the -e)
also and it failed with the same message. So I
connections which appear to rely on udp.
Anyway, any idea what might be wrong with my setup, it not reading the
rc.firewall script.
--
chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
removing it is for the better anyway.
--
Chip
Chip wrote:
I am trying to install 5.1 on a old P166. The install starts then fails
with these messages -
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type
,
Chip
Thanks in advance.
--
Chris Hill [EMAIL PROTECTED]
** [ Busy Expunging | ]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
there is a fix for this, crap two days of waiting for this to
finish installing, what a drag. :(
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
wrong?
--
Chip
peter lageotakes wrote:
--- chip [EMAIL PROTECTED] wrote:
I am trying to install OpenOffice on a PII-350 and
it has been running
make install clean for two days now. It just failed
with this messages -
In file included from
/usr/ports/editors/openoffice-1.1/work/oo_1.1_src/sch
Chris Pressey wrote:
On Sun, 25 Jan 2004 22:32:27 -0800
chip [EMAIL PROTECTED] wrote:
Okay, I downloaded and installed the .tbz file, moved it to /usr/local
and ran pkg_add. It finished, and the instructions on the screen say to
just run openoffice on the command line and answer a few questions
Nathan Kinkade wrote:
You may have to type 'rehash' first.
-Chris
I have done that and still no good.
--
Chip
Try taking a look at what/where the package installed files using
pkg_add. On my machine there is no binary or symlink called
'openoffice' either. However, I can do this to find
Dinesh Nair wrote:
On Sun, 25 Jan 2004, chip wrote:
Okay, I downloaded and installed the .tbz file, moved it to /usr/local
and ran pkg_add. It finished, and the instructions on the screen say to
just run openoffice on the command line and answer a few questions. When
I run the command I get
a
message about this a few days ago and haven't received any replies.
Any idea?
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED
Dan Rue wrote:
On Wed, Jan 28, 2004 at 06:37:59AM -0800, chip wrote:
I am also having a problem getting the binary OpenOffice to run (I am
running FBSD-5.1). The problem is it cannot find /libexec/ld-elf.so.1.
I installed the elf package but still get the same error. I posted a
message about
Peter Ulrich Kruppa wrote:
On Wed, 28 Jan 2004, chip wrote:
I am also having a problem getting the binary OpenOffice to run (I am
running FBSD-5.1). The problem is it cannot find /libexec/ld-elf.so.1.
I installed the elf package but still get the same error. I posted a
message about this a few
How do I get the special characters to work, which work in MS Windoze
using the conbination of right-alt+4digit code? I need to be able to use
certain accents and characters found in spanish writing. I am using
FBSD-5.1 with XFCE window manager.
Thanks,
Chip
Thanks for the tip. I just gave that a try and it works fine, a little
cumbersome though. But I'm sure I can get used to it. :)
--
Chip
On Sun, 21 Mar 2004, david wrote:
This may be of limited use to you, but the vim editor has this ability
built-in (if compiled that way). To see what's
Nathan Kinkade wrote:
On Mon, Mar 22, 2004 at 10:57:57PM -0800, chip wrote:
How do I get the special characters to work, which work in MS
Windoze using the conbination of right-alt+4digit code? I need to
be able to use certain accents and characters found in spanish
writing. I am using FBSD-5.1
I have mysql-5 and apache2 installed and working. I need to install
phpmyadmin but it wants to install mysql-4 and apache1. How do I prevent
it from installing another version of each app (can I even do this)?
Thanks,
Chip
___
[EMAIL PROTECTED
the same error -[error 2002] cannot connect to local
mysql server through /tmp/mysql.sock (2).
I read the section in the mysql manual about the socket but don't see
anything about creating this file.
How do I fix this?
Thanks,
Chip
___
[EMAIL PROTECTED
Kevin D. Kinsey, DaleCo, S.P. wrote:
Hi chip,
Please wrap your characters at 80 columns
of so for some of the people who use text
based email. Thanks!
Sorry about that. My email client is set to wrap lines at 72 chars.
Read on..
mysql.sock is a UNIX socket, created by the mysql process
itself
to get file
lists and download files from the DC network hubs?
Thanks
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
the onboard video.
Why is the system ignoring the settings for the screens?
--
Chip W
-
Section ServerLayout
Identifier XFree86 Configured
Screen 0 Screen0 0 0
InputDeviceMouse0 CorePointer
InputDeviceKeyboard0
subscribe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
from google you're liable to get a
negative response. It's best to lurk a while since you're new to irc
to get the feel of things. And trust me, you will learn alot just
listening in.
--chip
Just my $.02, your mileage may vary, batteries
On Mon, 7 Feb 2005 22:48:41 +1000, Warren
[EMAIL PROTECTED] wrote:
im trying to get cacti working, but since im using a small P2 300 machine with
a small hdd my /var has suddenly become full and im wodering what is safe and
not safe so to speak to del in the /var dir .. the following are the
quickly see what's up. When PF is disabled, I can nmap it in about 9
seconds. When I turn it on, it takes over 3 minutes to do. These
machines are on the same network, so the connection is obviously fast.
I believe this is becuase nmap is having to wait on the connections to
time out. If
chip3 chip3.wiegand.org
10.0.0.1chip3 chip3.wiegand.org
#
What have I screwed up and how do I fix it?
thanks,
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
fine. I don't know what you
mean by the DISPLAY variable.
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
apsfilter again).
rantI have been using freebsd since 3.0 and it appears the printing
setup has not changed a bit even in 5.2.1. When will this be brought in
to the 21st century?/rant
Anyway, what do I have to do to get emails to print?
Thanks and regards and getting frustrated,
Chip W
to initialise locking database
Can't initialise locking module - exiting
What is wrong and how do I fix it?
Thanks,
chip W
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
with a Lexmark E312 LazerJet. I
haven't tried Cups, don't know the first thing about it.
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
?
I'm using Mozilla Thunderbird for email. I've used other email clients
in the past and used apsfilter to set up printing and never had a
problem with printing email. I'm sure it's a filter problem, not set up
or some such.
--
chip
It sounds like you just need a -P printerConfigThatPrintsWebPages
which the properties show as lpr -Plp. In GhostView
it shows properties for lp as local printer and Generic UNIX LPD Print
System.
I guess I can save every email I want to print to a file, but I
shouldn't have to, and really don't want to.
Regards,
Chip
Malcolm Kay wrote:
There is really
now if the usbd_enable line is even needed since the mouse is
being run thru the ps2 adapter.
On the bottom of my mouse it says 'Wireless Optical Mouse Blue'. I
haven't made any mods/changes to the kernel, it is completely generic.
Regards,
Chip
Same here.
I find that the mouse is responsive and I
to be done to make this actually install correctly?
Thanks,
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Giorgos Keramidas wrote:
On 2004-08-30 06:44, Chip [EMAIL PROTECTED] wrote:
I am running FreeBSD-5.2.1 and installed the email client Mahogany from
the package yesterday. When I run it it crashes with this message -
bash-2.05b$ mahogany
[1] 24502
bash-2.05b$ Fatal Error: can't load any font
be just as easily put
on the dmz, along with the web server.
Could someone please just explain what is needed to make it send mail
out to the world from just one machine on the lan. It can't be as hard
as it appears to be.
Thanks,
Chip
___
[EMAIL PROTECTED
.
Regards,
Chip
On Sat, 4 Sep 2004 04:11:19 +0300
Giorgos Keramidas [EMAIL PROTECTED] wrote:
On 2004-09-03 16:57, [EMAIL PROTECTED] wrote:
Could someone please just explain what is needed to make it send
mail out to the world from just one machine on the lan. It can't be
as hard as it appears
.
That way is doesn't really mattter what you do under the hood.
--chip
Just my $.02, your mileage may vary, batteries not included, etc
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On 12/23/05, Maślanka Wojciech [EMAIL PROTECTED] wrote:
This is my network:
Internet---[rl0, 192.168.0.50_10.0.0.1
,rl1]--[10.0.0.2]
On 10.0.0.2 machine I cant ping any host in internet. I can ping only
10.0.0.1 and 192.168.0.50. :(
Whats wrong??
://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
Take a look at RegEx Coach it has several ways to express what the regex
string is doing. It's got
lots of other neat tools as well:
http://www.weitz.de/regex-coach/
--chip
--
Just my $.02, your
I noticed my firewall rules are not being read. I have rc.conf set to
read the file rc.firewall. In rc.firewall the first line is add divert
natd etc etc. that is followed by pass all from any to any etc etc. Then
nothing after that is read, it is all ignored.
If I comment out the line pass all
Alex de Kruijff wrote:
On Wed, Nov 19, 2003 at 09:38:34PM -0800, Chip wrote:
I noticed my firewall rules are not being read. I have rc.conf set to
read the file rc.firewall. In rc.firewall the first line is add divert
natd etc etc. that is followed by pass all from any to any etc etc
. It went down when the power
went out, and since has had the connection problems.
Any ideas?
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
to the network. I'll change out the
nic tomorrow and see if that makes any differance.
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED
, issue the
command 'ipfw show' and you will know for sure.
That was it. I forgot that some time back I had recompiled the kernel
with firewall enabled, then moved on to other things and forgot all
about it.
Thanks for the tip.
--
Chip
___
[EMAIL
I just installed ghostview and when I try to open a .ps file I get the
error that libc.so.4 is missing. If this is a dependency then why wasn't
it installed with ghostscript or ghostview? What do I need to do to fix
this? There is no one port for libc.so.4.
Thanks,
Chip
-release doesn't mean it is based on -stable. Guess I hadn't noticed
that before. Anyway, all is working fine now.
Thanks.
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
I just installed the ports linux_divxplayer and avifile, but neither one
seems to do anything. What is the command to actually play a movie in
these programs? I can't find anything remotely close.
Thanks
Chip
___
[EMAIL PROTECTED] mailing list
http
Now I installed mplayer. The man pages shows gmplayer as a gui version
of mplayer. When I enter gmplayer I get command not found. Mplayer works
otherwise. I see a port for skins for the gui, but no port for the gui
itself. Am I missing something here?
thanks
Chip
Xchat has always been one of my favorites:
http://www.xchat.org
Works on both *nix and Windows. Licensed under GPL.
On Wed, 17 Nov 2004 08:07:29 +0530, Subhro [EMAIL PROTECTED] wrote:
Hi,
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Nikolas Britton wrote:
Chip wrote:
I used to have Firefox installed, then tried to run portupgrade, and
it failed. I then did a make deinstall and make reinstall now I get a
failed install. Also tried to install mozilla and netscape, both also
fail. Below is the last bit from the firefox
I am using FreeBSD 7.0 Release and XFCE4.
I have downloaded and extracted some themes into
/usr/local/share/themes/ and reset the permissions to 777, they do not
appear on the themes list in the Settings control panel. I also copied
them into ~./themes, reset the permissions and they still do
Just installed FBSD 7, after being gone from FBSD the last 3 years.
During boot I see that the mouse is detected as ums0, but cannot get it
to work in X11. I cannot find any xorg.conf. or xorg.conf.new files. I
have gnome installed and working, so I know X is working properly. Any
suggestions
My /etc/X11 directory is empty, so do I create a new file called
xorg.conf and just try the code you have in it?
Thanks.
Gonzalo Nemmi wrote:
On Thursday 26 June 2008 20:49:46 Chip wrote:
Just installed FBSD 7, after being gone from FBSD the last 3 years.
During boot I see that the mouse
I ran update.locatedb, twice, and ran locate xorg.conf and locate
xorg.conf.new. The only result was for xorg.conf found in
/usr/local/man/man5/xorg.conf.5.gz
--
Chip
Gonzalo Nemmi wrote:
No ..
Run a locate xorg.conf to see what xorg.conf file is beign used to run
gnome ..
Check under /usr
Yes, it is enabled and also have usbd_enable set to YES and mouse_type
set to AUTO and mouse_port set to /dev/ums0 (which shows on the boot up
screen and it shows my exact mouse brand and model).
--
Chip
Malcolm Kay wrote:
On Fri, 27 Jun 2008 09:19 am, Chip wrote:
Just installed FBSD 7
the directory /dev there is ums0 in the directory.
--
Chip
Paul Schmehl wrote:
--On June 26, 2008 6:34:37 PM -0700 Chip [EMAIL PROTECTED] wrote:
I ran update.locatedb, twice, and ran locate xorg.conf and locate
xorg.conf.new. The only result was for xorg.conf found in
/usr/local/man/man5
Chip wrote:
Thanks for the tip, did that, and verified that the mouse is set to
auto in the mouse section, still no mouse in any X window manager.
Back out at the terminal I unplugged the mouse and plugged it back in
and get this error -
unable to open /dev/ums0: no such file or directory
Ok, it's working now, thanks for all the suggestions, you got me
straightened out. Once I got a xorg.conf.new configured correctly I
forgot to copy it to /etc/X11. Dummy me, heheheh. (Been a long time
since my last experience with BSD, about 3 years.)
Thanks guys,
Chip
Gonzalo Nemmi wrote
commented out the lines regarding the mouse in the
rc.conf and the mouse works fine in gnome.
--
Chip
The first thing you should do is go to the console, unplug and then
replug the mouse. You should see the mouse being disconnected and
then re-detected by messages written to console. If you
Anyone know how to get FBSD 7-R to recognize my Canon S3 IS and download
pics from it?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I found a pkg to add that supposed will allow me to mount the camera as
a filesystem, it's called fusefs-gphotofs. The following instructions
are given at the end of the pkg_add process -
Now fuse filesystems (sysutils/fusefs-*) can be mounted at startup from
/etc/fstab with the late
window
and quickly closes, I don't know what's wrong, but it's not downloading
the images.
Any suggestions on how to get a shortcut to a terminal window app to
work on XFCE?
Thanks.
chip wrote:
Anyone know how to get FBSD 7-R to recognize my Canon S3 IS and
download pics from
Heheh, got that working, had to add sudo to the beginning of the
command. Now the problem has to do with permissions. The pics are
downloaded with the owner being root, so I have to view the pics as
root. Whats the workaround?
Thanks.
chip wrote:
A little more info -
I now have gphoto2
Oddly enough, my cd drive will not open. Just yesterday I installed FBSD
from cd and it was fine. Now it won't open. I haven't used it since
installing FBSD.
I've tried umount /cdrom but get an error message
umount: /cdrom: not a file system root directory
Doesn't make any sense. I'm gonna
chip wrote:
Oddly enough, my cd drive will not open. Just yesterday I installed
FBSD from cd and it was fine. Now it won't open. I haven't used it
since installing FBSD.
I've tried umount /cdrom but get an error message
umount: /cdrom: not a file system root directory
Doesn't make any sense
Ryan Coleman wrote:
chip wrote:
Heheh, got that working, had to add sudo to the beginning of the
command. Now the problem has to do with permissions. The pics are
downloaded with the owner being root, so I have to view the pics as
root. Whats the workaround?
Thanks.
chip wrote:
A little
Ryan Coleman wrote:
chip wrote:
Ryan Coleman wrote:
chip wrote:
Heheh, got that working, had to add sudo to the beginning of the
command. Now the problem has to do with permissions. The pics are
downloaded with the owner being root, so I have to view the pics as
root. Whats the workaround
Chris Hill wrote:
On Fri, 27 Jun 2008, chip wrote:
chip wrote:
Oddly enough, my cd drive will not open. Just yesterday I installed
FBSD from cd and it was fine. Now it won't open. I haven't used it
since installing FBSD.
I've tried umount /cdrom but get an error message
umount: /cdrom
I can't access my cd drive on my regular login. I get this message -
CD-ROM read or access error (or no audio disc in drive).
Please make sure you have access permissions to:
/dev/acd0
So as root I set the permissions to 777 on acd0, then after a reboot the
permissions were reset back to what
Rudy wrote:
So as root I set the permissions to 777 on acd0, then after a reboot
the permissions were reset back to what they were previously. What do
I have to do to get access to my cd drive on my regular account?
Edit your /etc/devfs.conf file...
Add this line:
permacd00666
ports because it doesn't connect.
Thanks,
--
Chip
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
tried again, and it finally found a server to download from after
trying a long list of them.
I used port_install this last time. It appears to be going okay now.
Regards,
--
Chip
[EMAIL PROTECTED] wrote on 10/22/2003 12:56:10 PM:
so got a complete traceroute. Any idea why I can't ping but can
ssh_keygen on the BSD box, but don't know
what to do with the
two files it created, there are no instructions about that part in the man
file. Does anyone
have a how-to on settup of ssh between w2k and fbsd?
Thanks,
--
Chip
___
[EMAIL PROTECTED] mailing
why mail is not being sent?
Thanks
Chip W
Simrad, Inc
--
-bash-2.05b$ mail -v -s test [EMAIL PROTECTED]
testing again.
.
EOT
[EMAIL PROTECTED] Connecting to [127.0.0.1] via relay...
220 simradusa.com ESMTP Sendmail 8.12.9/8.12.9; Tue, 4 Nov 2003 08:33:17
-0800
Correct me if I'm wrong, but if DNS is not working, I would not be able to
do a traceroute to a domain name, right? But rather only to an ip address?
But I can do traceroute to a domain name, and browse the web, by name. Is
this right or not?
Thanks,
--
Chip W
Steve Hovey [EMAIL PROTECTED
. At the
bottom is all the screen messages of a mail and traceroute.
TIA,
--
Chip
[EMAIL PROTECTED] wrote on 11/04/2003 10:29:18 AM:
Correct me if I'm wrong, but if DNS is not working, I would not be able
to
do a traceroute to a domain name, right? But rather only to an ip
address?
But I can do
[EMAIL PROTECTED] wrote on 11/06/2003 01:23:22 PM:
What does 'mailq' tell you?
___
Here is the results of mailq -
simradusa# mailq | less
/var/spool/mqueue (8 requests)
-Q-ID- --Size-- -Q-Time-
servers often reject mail coming from machines without proper dns
entries. DNS not working right means much more than just can i resolve
a site on the box.
--
Chip
On Nov 6, 2003, at 3:41 PM, [EMAIL PROTECTED] wrote:
I've got to get this working. The suggestion that DNS is not working
No response would mean that someone is blocking you out (either
upstream or the receivers).
Cheers.
--
Jonathan Chen [EMAIL PROTECTED]
Tried that, it just sits on
simradusa# telnet mx4.mail.yahoo.com smtp
Trying 216.136.129.5...
and never connects.
--
Chip
I am trying to send test messages to the [EMAIL PROTECTED] list but
they never show up. I subscribed to the list just to see if my mail server
is working. I've sent messages from several machines through differant
mail servers, and none show up. Does that list even work at all?
Regards,
--
Chip
Forget it, one test message has finally appeared, just took quite a while.
Unfortunately it's not from the FreeBSD box I'm trying to get to send
messages. :(
--
Chip Wiegand
Computer Services
Simrad, Inc
www.simradusa.com
[EMAIL PROTECTED]
There is no reason anyone would want a computer
Charles Swiger [EMAIL PROTECTED] wrote on 11/07/2003 06:17:57 AM:
On Nov 6, 2003, at 6:32 PM, [EMAIL PROTECTED] wrote:
Tried that, it just sits on
simradusa# telnet mx4.mail.yahoo.com smtp
Trying 216.136.129.5...
and never connects.
OK, so you can be reasonably sure your ISP is
Is there a way for me to install FreeBSD from CD images that I have
downloaded without burning them to CD? Can I boot from a floppy and then
mount the images like a CD? I'm installing versions 4.9 and 5.2.
___
[EMAIL PROTECTED] mailing list
/phpMyAdmin-2.5.4/backup/functions.php on line 684
Prior to this I tried to run an update on a database and it also gave me
an out of memory error also. My database queries and updates are taking
much too long, if they finish at all.
Here's the top of top -
Any ideas about the memory problem?
--
Chip
.
Here's the top of top -
Any ideas about the memory problem?
--
I had a similar error. Change the maximum memory usage limit to a
bigger
value in your php.ini file.
Rommel
Thanks Rommel,
that solved it.
Regards,
Chip Wiegand
Simrad, Inc
I just received this micro$oft wireless optical mouse for christmas from
my son, and am wondering if anyone knows if it will work in freebsd 4.7?
I haven't tried it yet. It is both usb and ps2.
Thanks,
Chip W
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
in the wireless and nothing, a cursor
that doesn't move. In the terminal plugging in and unplugging the
wireless shows the appropriate usb connection information.
--
Chip
Bye,
Gernot
-Ursprüngliche Nachricht-
Von: chip wiegand [mailto:[EMAIL PROTECTED]]
Gesendet: Donnerstag, 26
Got it working on the ps2 port, not the usb port.
Regards,
Chip
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
. My company
plans on buying more from them this year.
--
Chip
- Original Message -
From: Jimi Thompson [EMAIL PROTECTED]
To: Scott Robbins [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, January 06, 2003 12:06 AM
Subject: Re: Laptops w/ FreeBSD pre-loaded (somewhat OT
% of the time.
Any suggestions on how to install win98 without wiping out the boot
partition, or how to recreate the dual-boot menu?
Thanks,
Chip
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
versions of winblows.
Regards,
Chip
On Mon, 6 Jan 2003 10:18:18 +0200
Giorgos Keramidas [EMAIL PROTECTED] wrote:
On 2003-01-05 22:44, chip wiegand [EMAIL PROTECTED] wrote:
I have a box running fbsd/w2k but am considering replacing w2k with
win98. There are problems with wine not being able to run
the new version?
--
Chip
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
was from a message I read in the archives, neither
address will make the scanner work.
When the machine boots it does find and recognize the scanner properly.
If I just plug in the usb cable, it is recognized as expected.
What to do now?
Thanks,
Chip
To Unsubscribe: send mail to [EMAIL PROTECTED
On Tue, 14 Jan 2003 20:19:33 -0700 (MST)
Warren Block [EMAIL PROTECTED] wrote:
On Mon, 13 Jan 2003, chip wiegand wrote:
Okay, I've checked the previous messages on the subject in the
archives, still doesn't work. The handbook apparently has no info on
setting up flat-bed scanners
was reading the handbook chapter on security and
am not sure if I should use kerberos, which I know nothing about, or
ssh. I was a little confused about the setup of kerberos in the kerberos
chapter.
Any suggestions for more info would be most appreciated.
Thanks
Chip W
To Unsubscribe: send mail
neither liberty nor safety.
-- Benjamin Franklin
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
-wd
--
chip norkus; unix geek and programmer; [EMAIL PROTECTED]
question
to my w2k box and renamed it to identity.ppk
(because that's what the WinSCP program wants). Is this okay to do? Can I now disable
telnet and any other inetd services that may be running? Any other suggestions?
--
Chip Wiegand
www.wiegand.org
PS
I have cc'ed another email address because my company
more. I've also tried just about every editor in the ports, and
like Nedit the best.
--
Chip
www.wiegand.org
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I have a printer connected to my fbsd box, and another connected to a
winblows box. the fbsd printer has crapped out on me and has 9 print
jobs waiting in the queue. is it possible to move those jobs from
printer queue lp to printer queue eps?
Thanks,
chip
To Unsubscribe: send mail to [EMAIL
1 - 100 of 452 matches
Mail list logo