".
Is there something wrong with the INSTALL document ?
Regards...Martin
Hello.
Still haven`t figured out what the problem is here. I don`t know enough yet.
Give me a hint please.
Regards..Martin
At 12:05 AM 7/29/2001 -0400, martin wrote:
>Hello.
>
>This is new for me so please be patient.
>
>I have printed out the docs, downloaded the source a
is this root sh there
Regards...Martin
-
At 02:46 PM 7/29/2001 +, Claudiu Bosioc wrote:
>hello!
>it's because you're using csh or tcsh.
>try using sh or bash (I'm on freebsd)
>regards,
>Claudiu Bosioc
normal during the vpopmail install for another
root login to appear and why ?
>regards,
>Claudiu
>martin writes:
>>Hello Claudiu.
>>That was it.
>>I just did a make then a make install-strip and at the end a root logon
>>popped up. I checked and yes, there w
Hello Mike.
Sorry for the delay in replying. Got pulled onto other things. Just tried
it and it works fine...thanks.
I have anothert question but I`ll put it on a new thread.
Regards...Martin
At 07:55 AM 7/30/2001 -0400, you wrote:
>hi
>try this should work ok
>if yur local
Hi.
I normally use APOP
http://www.geocities.co.jp/SiliconValley/4777/qmail/checkpw/
There is also a virtual password checker.
Can these be used with vpopmail ?
Regards...Martin
e pop3, other use pop-3. If
you use 110 then that problem and manual check is not required.
Regards...Martin
ed.
Shouldn`t that be "$hostname" if all the domains are virtual ones ?
Just an idea/solution.
Any opinions...
Regards...Martin
> On Sun, Aug 26, 2001 at 08:56:01PM -0400, martin wrote:
> > Hello again.
> >
> > INSTALL, para 6 - Add a virtual domain.
> >
> > I have added Six virtual domains.
> >
> > It says "vadddomain will modify the following qmail files&
was explicitly stated in the docs.
--
Daniel Biddle <[EMAIL PROTECTED]>
Regards...Martin
mail to a virtual domain, the bounce comes
from the original domain (which is what I would expect as I still have
.qmail-root, .qmail-postmaster, .qmail-mailer-daemon).
Opinions.
Regards...Martin
Hello.
I installed vpopmail and have some domains but am
confused as to the aliases.
Conventionally, they are in /var/qmail/alias.
Typically, .qmail-root, .qmail-postmaster and a
softlink .qmail-mailer-daemon is linked to
postmaster.
You enter a user who actually receives the mail within
Hi.
Although I have smtp-tls working, pop3s using stunnel
is not working despite my attempts to do so.
Is there some info for vpopmail users and multiple
domains to achieve this.
A link would do or a response from someone using
vpopmail that has this successfully working.
Regards...Martin
--- Rick Macdougall <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I'm using it here with great succes (although Eudora
> has a problem with it
> it appears).
>
> Regards,
>
> Rick
Do you have any info on how you set it up.
I'm using tcpserver by the way
___
--- Peter Palmreuther <[EMAIL PROTECTED]> wrote:
> Hello martin,
>
> On Wednesday, November 13, 2002 at 5:04:39 AM you
> wrote:
>
> > Do you :-
>
> > 1) Change the &username entry to
> > &/home/vpopmail/domains/domain/username
>
>
Hello.
Can Andrea Cerrito, Florent or Gabriel Ambuehl contact
me directly to discuss their pop3s(995) experiences
please.
Best wishes...
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
..any thoughts? Is this a qmail issue?
thanks,
Martin
thank you very much...that fixed the issue!!! Hopefully all will go
well from here
thanks again,
Martin
Tom Collins wrote:
On Thursday, October 16, 2003, at 11:46 AM, martin wrote:
[EMAIL PROTECTED] users]# more assign
+example.com-:example.com:89:89:/home/vpopmail/domains/example.com
just hange there saying "connecting to 192.168.0.12" with the
escape info...and that is it. I rebooted the macine...and as was well
for a little bit...then it has happened again. Have I messed something up?
thanks,
Martin
thanks...I will try this and let you know how it work out
Martin
David Bristol wrote:
When this happens, try running qmailctl stat and ps aux |more . Look for
any qmail services that are not running, or any readproctitle service
errors. Also, make sure you do not have any other servers/services
Ok --- I ran the qmailctl stat...everything shows up... ps aux | more
appears to be ok on the output and I am still getting the lockup with
trying to AUTH into the serveris it possible that there is another
AUTH program that might be running?
thanks again,
Martin
David Bristol wrote
,
Martin
Thomas Ledet wrote:
Hi,
I'm having trouble with the vadddomain command. It gives me this
error, when i try to add a domain
# vadddomain testdomain.com 123test
Failure while attempting to remove_line() the locals file
Error. Failed to add domain to assign file
Error: Could not update
if this is the virtual user... did you try lala%10.0.0.223 ?
regards,
Martin
Mihai Cuibus wrote:
Hi,
I tried to find a solution on web but until now nothing worked for me...
I have the following situation:
Redhat9.0+qmail+daemontools+uucspi+vpopmail.5.3.29+msql.3.23.58.
I followed
the anwers were that "vpopmail was not installed"
hoever..this is not the case and it is up and running. I read the
INSTALL and don't see where any of the flag pertain to the aboveam I
seriously over looking something? Please advise.
Best Regards
Martin
Tom Collins wrote:
On Wednesday, November 26, 2003, at 08:53 AM, martin wrote:
I am running RH 9,, qmail-1.0.3... vpopmail-5.2.1...
autorespond-2.0.2... and ezmlm-0.53-idx-0.41. when running "make"
i get the following
[snip]
vpopmail.h & and vauth.h are i
y
`/var/www/cgi-bin/sqwebmail-3.6.1.20031109/gdbmobj'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/var/www/cgi-bin/sqwebmail-3.6.1.20031109/gdbmobj'
make: *** [all-recursive] Error 1
best regards -
Martin
how did you set up the ./configure? ./configure
--enable-roaming-users=yes ? ( I think that is the flag) what
verision of Vpopmail are you using? the one from below?
Arnaud BECKER wrote:
Could anyone help me please with my problems with the roaming user
support.
please please
I don't kn
I was running 5.2.1 on RH 9 with enable roaming and also clear passwd=y
I did upgrade to 5.2.2 and everything seemed ok... what OS are u
using? Does anyone have any insights on this?
thanks,
Martin
Arnaud BECKER wrote:
Yes, I've used :
--enable-roaming-users=y
I've put some
Greetings -
Recently I am getting a few emails that get returned saying
Connected to 207.155.248.45 but sender was rejected.
Remote host said: 550 Invalid domain terabytellc.com
or...that a host that is being sent the email to can not be found by our
email server.could this be a reve
Jake S wrote:
martin said:
Greetings -
Recently I am getting a few emails that get returned saying
Connected to 207.155.248.45 but sender was rejected.
Remote host said: 550 Invalid domain terabytellc.com
or...that a host that is being sent the email to can not be found by our
email
and closes the SMTP connection.
Looking at the vpopmail directories, I had a .qmail-default with the bounce no
mailbox so I renamed this and created Two control files .qmail-marrandy and
.qmail-martin with delivery instructions for the Two users. I get deliveries
to these accounts but qmail/vpopm
uot;.
>
> If you're running a vpopmail only machine, that patch is useless.
>
> -Jeremy
>
> --
> Jeremy Kitchen <[EMAIL PROTECTED]>
Hello Jeremy.
Thanks for the swift reply.
Is there an alternative solution ?
What do you suggest ?
This is mainly to protect
that on the web page, the patch version is given for vpopmail 5.3.6 &
5.3.25. These are development versions and the last stable is vpopmail
v5.2.2.
Has anyone tried it on 5.2.2 stable (on a production system) and what version
patch did they use ?
Regards...Martin
--
Confidence is si
Hi -
I am getting the following error when trying to access VQAdmin
vQadmin was unable to determine your username, which
means your webserver is improperly configured to run
with this CGI. For security reasons, this script
will not run without Apache htaccess lists.
vqadmin 2.3.2
vpopmail 5.2
Bernd wrote:
I am getting the following error when trying to access VQAdmin
vQadmin was unable to determine your username, which
means your webserver is improperly configured to run
with this CGI. For security reasons, this script
will not run without Apache htaccess lists.
vqadmin 2.3.2
vpopm
I am getting the error that my host is not found in the rcpthost
file...however..it is there. This is my second email box that I am
building "RH9" and I am not sure where I failed this time around (or
maybe I did the first one wrong).
I enabled remote users in vpopmail...on the first box...I am
Jeremy Kitchen wrote:
On Tuesday 25 May 2004 08:33 am, martin wrote:
I am getting the error that my host is not found in the rcpthost
file...however..it is there. This is my second email box that I am
building "RH9" and I am not sure where I failed this time around (
martin wrote:
[snip]
if you're using tcpserver for your smtp service, you need to point its -x flag
at the proper cdb file on your system that vpopmail is rebuilding. vpopmail
told you which one that was when you configured and built it, so t
Preliminary info.
vpopmail 5.4.17
OpenBSD 4.0
It's been working for a week or so.
I downloaded email from several accounts on Two domains around 08:30
today.
My next email check around 09:15 gave me authorization failures on all
accounts and domains.
qmail is up...I did restarts just in case.
here a way to make sqwebmail recognize or work
with APOP?
(martin
---
Martin Hasenbein Phone (Fax): (+49) 89 1216376-1 (3)
\|/ Weiglstr.9mailto:[EMAIL PROTECTED]
@ @
exactly do I have to configure for that?
Something in the password-database or in the apop-secrets file?
/martin
---
Martin Hasenbein Phone (Fax): (+49) 89 1216376-1 (3)
\|/ Weiglstr.9
Hi,
how can I configure vpopmail to use POP *and* APOP
for password checking. I need POP for sqwebmail and
APOP for Eudora? POP and APOP themselves are working right now,
but I need both for every single account. So that the user
can choose if he wants to use POP or APOP.
/martin
have mysql library in both /usr/lib/mysql and
/usr/local/lib/mysql. I can also compiled vpopmail successfully. Why can it
say that there is no mysql library?
Martin
I currently have qmail installed and using about 50 domains with ~/.qmail
files - I wish these to stay this way, for multiple reasons. These
mailboxes also do not use Maildir
What I need is to run ONE domain with this patch. So far, everything is
working except pop3. I need to find a way to l
Hello;
I have kinda a strange problem. When I installed and configured vpopmail,
i put in the numbers for quota thinking it was in KByte not Byte - how can
I now, without disturbing the users already there, change the default for
a different number?
Andrew
I have reset the existing users, and have recompiled and reinstalled the
vpopmail program, but when new users are being added, it is still at the
old default.
On 19 Sep 2001, Ken Jones wrote:
> On Tue, 2001-09-18 at 22:21, Andrew Martin wrote:
> >
> > Hello;
> >
>
Back to my original post, I am still having a problem with quotas. I have
re-configured, ran make, and installed with higher default values, but by
default, new users in a domain are still getting stuck with my original
compile limit. I need to fix this, if somebody can walk me through it?
Sec
Martin fienkeng
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
d the option
could be helpful for users.
Thanks for your answers.
/mh
--
Martin Hasenbein -- [EMAIL PROTECTED]
UNIX, a way of life.
FreeBSD, my choice of living.
could be helpful for users.
> >
>
> SQWebmail does password changes directly now, so the old method of password
> changing isn't needed for V3.0.0 and up. If you have 3.2.0 say no.
>
OK, havn't tried it yet :-(
Was just confused about the hint in configure.
Thanks.
05598
/mh
--
Martin Hasenbein -- [EMAIL PROTECTED]
UNIX, a way of life.
FreeBSD, my choice of living.
/x-stuff.net/test:NOQUOTA
~
The "1" means "normal" passwords.
A "2" means APOP.
Wasn't it possible to change it to "0" to have both
APOP and "normal" passwords??
If it's not possible, is there a patch around?
Thanks you for help.
in my
logfiles, when an eMail is injected via SMTPafterPOP.
Maybe any patches?
Thank you.
/mh
--
Martin Hasenbein -- [EMAIL PROTECTED]
UNIX, a way of life.
FreeBSD, my choice of living.
hi.
I use qmail, vpopmail and courier-imap combination to
handle some local maildomains. I did use patched
vdelivermail to get quota work properly with courier-imap
but afer upgrade to 5.0 I cant find proper patch anymore
and old vdelivermail doesnt work coreectly with catch-all
account in domai
ader-line to the eMails,
that this eMails has been verified by SMTP_after_POP. qmail is
patched to add this line. How can I change vpopmail to add
the username who verified the eMail to that line?
Can anyone help me?
Thanks.
/mh
--
Martin Hasenbein -- [EMAIL PROTECTED]
I have checked that the domain name is existed in
morercpthosts but qmail-send always said not in control files. Although I use
qmail-newmrh again and again, the problem didn't solve.
Please help!!!
Martin
I am using FreeBSD + Qmail + Vpopmail 4.9.10 +
Mysql
Martin
- Original Message -
From:
Martin Chung
To: [EMAIL PROTECTED]
Sent: Monday, September 09, 2002 4:10
PM
Subject: [vchkpw] morercpthosts file
problem
Hi,
I have a big problem to add a new
I have tried to run qmail-newmrh after I add a new domain name but the
problem is still the same.
What's your meaning of "made a qmail-newmrh"
Martin
- Original Message -
From: "Malte Ahrens" <[EMAIL PROTECTED]>
To: "Martin Chung" <[EMAIL P
How to control the time of /var/qmail/control/morercpthosts.cdb?
Actually, I use vadddomain to add the new domain name
Martin
- Original Message -
From: "Malte Ahrens" <[EMAIL PROTECTED]>
To: "Martin Chung" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Hi,
Would you tell me the meaning of the below
message?
delivery 143965: deferral:
Uh-oh:_.qmail_has_prog_delivery_but_has_x_bit_set._(#4.7.0)/
Martin
Hi,
Is there any tool or patch to control Qmail sending
emails out?
Can I control the numbers of emails sending from a
user within a period of time?
Thank you
Martin
y can send within a period of time. For example, users can only send 100
emails in 1 day.
Can spamGuard be able to do this? Or any other
solution?
Thank you,
Martin
- Original Message -
From:
John
C
To: [EMAIL PROTECTED]
Sent: Thursday, October 17, 2002 1:22
AM
Su
I pop all emails
out, that file will not be removed and no more quota warning email will be sent
if that user reach warning level again.
Do I need to make a cron job remove this
file?
Martin
Hello,
I followed these instructions:
http://hibrida.interaksi.web.id/man/qmail/step-dnata.html
to set everything up, then used the following for courier-imap installation.
http://www.inter7.com/courierimap/INSTALL.html#install
Everything works great. sqwebmail, POP3, smtp, IMAP even.
_Except:
Hello,
I recently setup a vpopmail + qmail + sqwebmail box.
NOTE: I may be confusing some of the following suggestions with courier-imap
install issues I had. Sorry if im off here.
1)
I had to 'chown root.root /home/vpopmail/bin/vchkpw'.
2)
Also, try this:
make the 'authmodulelist=' line in
the
mail bounces, but sometims, and i'm not sure when this happens i
get an error: " deferral:
Sorry,_no_mailbox_here_by_that_name._vpopmail_(#5.1.1)/maildrop:_error_writing_to_mailbox./maildrop:_Unable_to_deliver_to_mailbox./"
any idea what could be wrong? is it
sorry i've forgot the following:
09:34:34 local prog: delivery 2936: deferral:
Message_start_at_44_bytes,_envelope_sender=MAILER-DAEMON/maildrop:_Attemptin
g_mailfilter/Tokenized_string:_"VPOP"/Tokenized_=/Tokenized_string:_"|/home/
vpopmail/bin/vdelivermail_''_bounce-no-mailbox"/Tokenized_;/Token
I compile vpopmail 4.8.7 and try it no problem. I can add and delete
domains and users
I download Qmailadmin 0.34 , compile it and make install-strip , no
problem. The first use on the login screen , when I enter my domain
name and password and login I get the message : vsql_getpw: failed
select
I would like to ask how to increase the size of log file.
I find that the log file will save to another file when the file size exceed
about 98KB.
I want to use larger log file instead of many small files.
How can I do?
Hi,
If I want to deny mail relay so that no people can telnet my server's 25
port and use SMTP command to send mail, is there any option for qmail to
config this?
If no, what can I do?
Thanks in advance!
Martin
Hi,
If I want to deny mail relay so that no people can use my mail server to
send unauthorized mail, is there any option for qmail to config this?
If no, what can I do?
Thanks in advance!
Martin
copy in my own account.
Regrads,
Martin
-Original Message-
From: Madrus - CBN [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 13, 2000 7:44 AM
To: Daniel Augusto Fernandes; [EMAIL PROTECTED]; Ken Jones
Subject: Re: problem quota when using dot qmail
Dear Ken,
I know how to solve th
Hi All,
Whenever I send mail from a virtual domain, it contains my machine
hostname
in the From: field.
How do I get it to use my virtual domain name instead?
TIA,
Mike M
c vchkpw[7733]: real: passwords don't match
Any ideas?
ThanX in advance,
Martin
-----
Dipl.-Ing. Martin Schichl
SC&C Software, Communication & Consulting GmbH & Co KEG
Grottenhofstr. 3, A-8053 Graz
Tel. +43/(0)316/265-205, Fa
l/bin/qmail-smtpd
ThanX,
Martin
-
Dipl.-Ing. Martin Schichl
SC&C Software, Communication & Consulting GmbH & Co KEG
Grottenhofstr. 3, A-8053 Graz
Tel. +43/(0)316/265-205, Fax +43/(0)316/265-234
[EMAIL PROTECTED], http://scc.co.at
c vchkpw[7733]: real: passwords don't match
Any ideas?
ThanX in advance,
Martin
-----
Dipl.-Ing. Martin Schichl
SC&C Software, Communication & Consulting GmbH & Co KEG
Grottenhofstr. 3, A-8053 Graz
Tel. +43/(0)316/265-205, Fa
l/bin/qmail-smtpd
ThanX,
Martin
-
Dipl.-Ing. Martin Schichl
SC&C Software, Communication & Consulting GmbH & Co KEG
Grottenhofstr. 3, A-8053 Graz
Tel. +43/(0)316/265-205, Fax +43/(0)316/265-234
[EMAIL PROTECTED],
ota [EMAIL PROTECTED] 1000"
it works fine.
What's the problem?
Thank you
Martin
the success page.
Any ideas???
I am running the latest version of everything
Your help will be greatly appreciated
My platform
RedHat 6.2
Qmail 1.03 patched
Vpopmail 4.9.6-1
vqsignup 0.3
Thanks
Martin Fienkeng
"Yet another guy trying to switch from Microsoft to
any of these domains.
I have attached a copy of the error reply.
Thank You,
Martin Nichols
[EMAIL PROTECTED]
The same problem is ~vpopmail/lib/libvpopmail.a - clear username and
password to MySQL !
Martin
> -Original Message-
> From: Alex W [mailto:[EMAIL PROTECTED]]
> Sent: Monday, January 29, 2001 6:54 AM
> To: [EMAIL PROTECTED]
> Subject: security bug in vpopmail
>
>
&
s), it skips to the next entry. What is
the "standard" way to use diff to create patches? I'll post the patch
here if anyone is interested.
Thank you!
Mathieu Martin
Network Admin
CoopTel
[EMAIL PROTECTED]
plicate this
code in vconvert.c, or to write a quick script to import the files. Of
course, I can be totally wrong, I only had a quick look at the code.
If anyone has comments or if someone is already working on the issue,
please let me know.
Mathieu Martin
Network Admin
CoopTel
[EMAIL PROTECTED]
Why inter7 don' want to include this patch to future version of vpopmail ?
This is the best add-in. Without this, vpopmail is only 50% product. We need
this patch for running good mail server.
Please, please include dbfunctions permanently to vpopmail.
Martin
- Original Message -
Hi,
I've setup vpopmail and it works. Now I wanted to setup
a mailing list in a virtaul domains, but that doesn't work.
What arethe steps I've to do to setup a amiling list in a
virtual domain? Can anybody help me?
Kieran Barnes ([EMAIL PROTECTED]) wrote:
> Maybe you should download and install the web interface to vpopmail
>
> www.inter7.com/qmailadmin
>
> Make sure ezmlm-idx is installed before hand.
> www.ezmlm.org
>
> --
Hi Kieran,
isn't there a way to make it without qmailadmin?
/martin
Hi,
I've setup vpopmail with the option --enable-relay-clear-minutes=20
Is there a way to change this after compilation? I've found no
control-files to change the value for that.
/martin
---
that? Can I change it?
/martin
---
Martin Hasenbein Phone (Fax): (+49) 89 1216376-1 (3)
\|/ Weiglstr.9mailto:[EMAIL PROTECTED]
@ @ D-80636 München
hi
i am using on my qmail/vpopmail installation dovecot as IMAP/POP3
server. at the moment i have only some of the users having their mail
filtered through sieve/delivered to the mailbox by dovecot LDA. for this
users i have added a line to their .qmail-default file file as written
on http://wiki
ensure to keep your domain for local purpose.
Be sure to define correctly your local DNS to use it.
Regards
Martin
--
From: "Federico Santulli"
Sent: Friday, April 30, 2010 3:33 AM
To:
Subject: [vchkpw] vpopmail 5.4.30
Hi all,
st.c
# LD_LIBRARY_PATH=/home/vpopmail/lib ./a.out
Segmentation fault (core dumped)
I don't know how to get a useful backtrace:
(gdb) backtrace
#0 0x in ?? ()
#1 0x00400aef in main () at test.c:9
Should I build vpopmail static? Or is there another solution?
Greetings
Martin
!DSPAM:4be9cff232716027413795!
y first fault was to think that 5.5.0 is a stable release. I tried
5.4.30 and it's working again. My 2-lines c-code and the chkuser patch.
Greetings
Martin
!DSPAM:4bedb79832717422568130!
It's look like a permission problem. When you create your u...@domain, you
create it using the ~vpopmail/bin/vadduser in a root session?
Check your $QMAILDUID and $NOFILESGID in the sh script, be sure that user.group
are the owner of the tree /data/apps/vpopmail/*
Gook luck
Martin
this mail in the archive
http://bluedot.net/mail/archive/read.php?f=2&i=9847&t=9847&v=t
seems to be same problem... but there was no reply to that mail
:-(
i'm using vpopmail 5.3.20 with mysql
greets
Martin
--
Martin Kos Handy +41-76-384-93-33
htt
ese should be logged in year 2003 July but the date and time
were strange. I also use vqadmin to check these logged times and it also showed
incorrect timestamp. What's happen?
Thank you very much
Martin
Hi,
Anyone has idea about how to create user with pre-defined
gid after executed vadduser?
Martin
Hi,
I am not using *nix adduser or useradd but using vpopmail's vadduser. As the
gid can control vpopmail user's imap access, webmail access, etc. I want to
created user with no imap or webmail access by default.
Thanks
Martin
- Original Message -
From: "John S
ing to find a solution to this problem for a couple of weeks
now, and the usual mailing list archives and google searches have not
provided a solution
Many thanks
Martin.
Please post this answer to the list!
I have been searching for this answer for two days now, and I was about to
post to this list. I think a lot of people would like to know this.
-Alex
- Original Message -
From: "Bill Shupp" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, Sep
script and add the listening port in some manner? Or, do I
need to recompile qmail?
Many thanks
Martin.
1 - 100 of 166 matches
Mail list logo