En/na Jukka Palko ha escrit:
Now that I've gotten my system running smoothly with my cable
channels, I have a short question about ttxtsubs.
Looks like the subtitles get shown when viewing a channel that sends
them, but they don't either get stored onto the recordings or they
don't get
En/na Girish Venkatachalam ha escrit:
Do you by any chance mean to say that I can buy a budget card and still
run vdr?
Yes, using softdevice, xine, xineliboutput or a dxr3. You should look at
these plugins to see which one is more suitable to you.
That is also okay by me. Which card
En/na Glyn Edwards ha escrit:
Hi,
I've got VDR (1.4.3) running on a machine by my TV and have just been
playing with the xineliboutput plugin to stream vdr over the network.
Everything works well on its own but I'd like to be able to have someone
watching TV on one channel via the dxr3 and
En/na Rob Davis ha escrit:
Anyone else getting seg faults on this for Sky Italia?
raise MAX_CHANNELS to 400 and MAX_PROGRAMS to 35000 (or, alternatively,
find a way to only get the epg for fta channels, avoiding all the
useless crap I cannot view anyway).
The transponder with the epg is now
En/na Tony Houghton ha escrit:
In [EMAIL PROTECTED], Marko Mäkelä wrote:
100 Mb/s LAN is enough. Come to think of it, the SDTV DVB stream is only
a few megabits per second, and it is the compressed MPEG stream that is
being transferred. However, I wouldn't try this over WLAN.
The error
En/na Klaus Schmidinger ha escrit:
Udo Richter wrote:
Pjotr Kourzanov wrote:
I am experiencing VDR errors when loading EPG via SVDRP. If the EPG
data to
...
I have recently sent the attached patch to Thomas Koch [EMAIL PROTECTED].
It dramatically speeds up getting EPG information from
I recently (more on that below) started experiencing a strange problem
with vdr 1.4.5-1 and vdr-xine 0.7.6+network patches: while replaying a
recording (either against a local copy of vdr or over the network) the
only command that acts immediately is pause, every other one (skip one
minute,
En/na Ondrej Wisniewski ha escrit:
I am using VDR 1.4.5 with the integrated auto pid feature and without
any CAM. When tuning to an encrypted channel, the CA value gets set
accordingly and channel not available is displayed. So far so good.
However there are channels that encrypt only certain
En/na Stone ha escrit:
3) Does vdr care or know anything about a rotor setup where the channel
isn't always present the moment the diseqc commands are sent?
Well, vdr isn't aware the dish is moving, so it doesn't wait for it.
This isn't a big problem for live view, but it is a potential
En/na Patrick Cernko ha escrit:
I'm using SGI's XFS for any kind of data filesystem and only use ext3
for / . So far, no problems at all.
I also use XFS exclusively, but I have the random zeroed files when
the system crashes/power goes off unexpectedly.
Bye
--
Luca
En/na Pasi Juppo ha escrit:
Same actually goes for this mailing list. Proper forum is much more
convenient than mailing list because of proper threading etc. features.
Could someone be able to set up the forum and most importantly would
this discussion move to the forum?
I hate forums, since
En/na kafifi ha escrit:
Hi all,
I've just tuned my second dish on 28.2E, viewing many FTA channels.
Curiously, vdr doesn't display any EPG (just now next information).
Is there any special transponder I must tune to download EPG,
or SKY uses a non standard EPG ? In this case, could you
Hello,
I wanted to try the development version of vdr (1.5.3) to see what's new
and to keep my actuator plugin up to date.
I think that the new vdr is doing funky things with the osd, since the
menu is unwatchable (a lot of dxr3: colormanager: bummer, too many
sections (14), reusing last one).
En/na Luca Olivetti ha escrit:
Hello,
I wanted to try the development version of vdr (1.5.3) to see what's new
and to keep my actuator plugin up to date.
I think that the new vdr is doing funky things with the osd, since the
menu is unwatchable (a lot of dxr3: colormanager: bummer, too many
En/na Luca Olivetti ha escrit:
En/na Luca Olivetti ha escrit:
Hello,
I wanted to try the development version of vdr (1.5.3) to see what's new
and to keep my actuator plugin up to date.
I think that the new vdr is doing funky things with the osd, since the
menu is unwatchable (a lot of dxr3
En/na Klaus Schmidinger ha escrit:
anels work ok
with a dxr3.
Probaly antialiasing produces too many colours for the dxr3 to handle.
VDR's skins first check whether the OSD in use can handle 8bpp, and
only then uses a single 256 color bitmap (with font anti-aliasing).
Maybe the dxr3
[sorry if this turns out to be long]
In the actuator plugin main menu, I offer the possibility to tune to a
transponder on the fly, to either quickly see what's there or to
trigger a transponder scan.
To do that I have this piece of code that worked find under 1.4.x but
stopped working under
En/na Klaus Schmidinger ha escrit:
Putting some printf here and there, it seems that's ultimately calling
cDevice::SetChannelDevice instead of cDvbDevice::SetChannelDevice, and I
don't understand why, since DvbKarte is 0 (the first and only card,
which should be a cDvbDevice).
Are you
Hello,
I'm releasing version 1.0.4 of the actuator plugin available at
http://www.ventoso.org/luca/vdr/
This plugin controls a linear actuator (or an horizon to horizon one)
through the parallel port with a simple circuit.
CHANGES:
- check the CardIndex to identify the selected card in the
En/na Stefan Huelswitt ha escrit:
Hi,
trying to upgrade to 1.5.5 I'm facing the problem that VDR
segfaults right on startup (no plugins envolved).
First step is to check if you have some tt font installed.
Then check /etc/fonts/fonts.conf (and subdirectories in /etc/fonts) to
see if Sans
En/na Luca Olivetti ha escrit:
Hello,
I'm releasing version 1.0.4 of the actuator plugin available at
http://www.ventoso.org/luca/vdr/
I realized that, since I upgraded my kernel, I inadvertently released
the tarball with module.c already patched with the
apply_for_kernel_2.6.15.patch
En/na Luca Olivetti ha escrit:
I realized that, since I upgraded my kernel, I inadvertently released
the tarball with module.c already patched with the
apply_for_kernel_2.6.15.patch, so if you run an older kernel you
should patch it with -r (then eventually apply
apply_for_kernel_2.6.13
En/na Magnus Andersson ha escrit:
ttxtsubsdisplay.c: In member function ‘void cTtxtSubsDisplay::ShowOSD()’:
ttxtsubsdisplay.c:415: error: ‘SetCode’ is not a member of ‘cFont’
ttxtsubsdisplay.c:415: error: ‘I18nCharSets’ was not declared in this scope
ttxtsubsdisplay.c:438: error: ‘SetCode’ is
En/na Peer Oliver Schmidt ha escrit:
Hello,
after my vacation I no longer have any reception.
[...]
Just a wild guess, but if you usually leave your vdr pc switched on,
leaving it off for a while could make it not work right when turned back
on (usually capacitors are to blame). Maybe a
En/na listnisse ha escrit:
Hi all,
I have searched the internet (including archive.org) for
dvbtextsubs-0.2.tar.gz but haven’t found it. I would really appreciate
if some friendly soul on this list would like to send me the file or
point me to a location.
maybe you're looking for
En/na lukkinosat ha escrit:
Hello
On site http://www.kikko77.altervista.org/ in the
section download, is available the new version of
LoadEPG.
History:
2007-07-26: Version 0.1.11
- Fixed for new format epg of Digital+ (S19.2E Spain)
Since vdr 1.5.x changed the numbering of the cards if there
En/na Luca Olivetti ha escrit:
If I change the function cLoadepgOsd::SwitchToEpgChannel (and only that
function) to use cDevice::PrimaryDevice() to do the switching then
everything works as expected (well, special characters show up as little
squares in accents in the epg, but I'll look
En/na lukkinosat ha escrit:
--- Luca Olivetti [EMAIL PROTECTED] ha scritto:
I made a crude hack: I assume that the epg is in
ISO-8859-15, so if
SystemCharacterTable is different than iso-8859-15,
I call iconv to
convert the file in cLoadepgOsd::SaveEpg, just
before the LoadFile label
Hello,
I'm releasing version 1.0.5 of the actuator plugin available at
http://www.ventoso.org/luca/vdr/
This plugin controls a linear actuator (or an horizon to horizon one)
through the parallel port with a simple circuit.
CHANGES:
- Updated russian translation from Vladimir Monchenko bob at
En/na Klaus Schmidinger ha escrit:
On 08/12/07 22:01, Luca Olivetti wrote:
En/na Luca Olivetti ha escrit:
it appears that, even if the setlocale call succeeds, gettext doesn't
find the correct translation for LanguageCode (it always returns esl,
very strange since ca_ES is the first one
En/na Klaus Schmidinger ha escrit:
I'm just unsetting LANGUAGE before launching vdr. Maybe someone else
will be bitten by this problem and he'll have to unset LANGUAGE too.
Wouldn't that be problem for other applications, too?
Could VDR do something to make this work better?
I don't know,
En/na Anssi Hannula ha escrit:
Note that KDE does provide the user a list of languages, but it does not
use gettext, but instead uses its own glibc-derived implementation for
translation, with file format being the same.
[...]
Isn't there perhaps a way to tell gettext *explicitly* which
En/na Klaus Schmidinger ha escrit:
It seems that it *does* work, i.e. LANGUAGE=de, LANGUAGE=fr, LANGUAGE=fi
will work even if there is no such locale at all.
I copied a .mo file into /usr/share/locale/testtest/LC_MESSAGES/, which
certainly is not a valid locale, and using
En/na Klaus Schmidinger ha escrit:
Please test the attached patch. It scans the LOCDIR directory as before,
but checks for the existence of a vdr.mo file and then uses setenv()
instead of setlocale().
This should work for VDR itself. For plugins I need to do more work.
But first let's see
The diff fails on all po files, it's only me or does it happens to others?
Bye
--
Luca
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
En/na Klaus Schmidinger ha escrit:
On 08/19/07 16:54, Luca Olivetti wrote:
The diff fails on all po files, it's only me or does it happens to others?
You need to add '-p1' to the patch command.
Yes, I know that, it doesn't prompt me for the filename, but it just
FAILS to patch (and stores
En/na Luca Olivetti ha escrit:
En/na Klaus Schmidinger ha escrit:
On 08/19/07 16:54, Luca Olivetti wrote:
The diff fails on all po files, it's only me or does it happens to others?
You need to add '-p1' to the patch command.
Yes, I know that, it doesn't prompt me for the filename
En/na Klaus Schmidinger ha escrit:
Please try version 1.5.8, which I have just uploaded.
yes, 1.5.8 works.
Bye
--
Luca
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
En/na Udo Richter ha escrit:
Luca Olivetti wrote:
The diff fails on all po files, it's only me or does it happens to others?
po files are a pain for diff-patches because they have lists of source
code line numbers in the comments. If you've applied any other patch to
the VDR sources
Hello,
I'm releasing version 1.1.0 of the actuator plugin available at
http://www.ventoso.org/luca/vdr/
This plugin controls a linear actuator (or an horizon to horizon one)
through the parallel port with a simple circuit.
The only change is the adaptation to the new translation method, so it
En/na Udo Richter ha escrit:
Matthias Fechner wrote:
cp Make.config.template Make.config
edit it and set LOCDIR=./locale
ok I changed it, now VDR says at startup:
Aug 20 14:53:36 localhost vdr: [23028] found 21 locales in ./locale
Aug 20 14:53:36 localhost vdr: [23028] no locale for language
En/na Klaus Schmidinger ha escrit:
Note that the multiple OSD change currently has no visible effect yet,
but it is a necessary preparation for displaying subtitles, which will
be addressed in the next developer version.
dvb or teletext?
Bye
--
Luca
En/na Klaus Schmidinger ha escrit:
On 08/26/07 21:51, Luca Olivetti wrote:
En/na Klaus Schmidinger ha escrit:
Note that the multiple OSD change currently has no visible effect yet,
but it is a necessary preparation for displaying subtitles, which will
be addressed in the next developer
En/na Rolf Ahrenberg ha escrit:
On Thu, 30 Aug 2007, Luca Olivetti wrote:
With a quick look (and I remark quick so I may be wrong) it seems that
the patches now don't change anymore the osd but use the new osd level
in vdr-1.5.9.
Yes. I've set subtitles to use level 10 and ttxtsubs to 20
En/na Petri Helin ha escrit:
Luca Olivetti wrote:
En/na Rolf Ahrenberg ha escrit:
DVB subtitles are working nicely in my FF setup and someone reported
that ttxtsubs are working with xineliboutput.
I somewhat doubt it, since I had to bypass the IsOpen test to make it
work with a properly (I
En/na Rolf Ahrenberg ha escrit:
On Sun, 2 Sep 2007, Luca Olivetti wrote:
You're right, I've re-checked without my patch and it works (though with
the osd level the IsOpen check is not really necessary).
Well, you're right too and it was a bummer in my patch - somehow forgot
to check
En/na Rolf Ahrenberg ha escrit:
On Mon, 3 Sep 2007, Luca Olivetti wrote:
why don't you take maintainership of the plugin, release a full tarball,
and be done with it?
Because I don't want it. The plugin needs a complete rewrite and there's
no point to do it before Klaus has integrated
En/na Klaus Schmidinger ha escrit:
I haven't looked into the code of the ttxt subtitle plugin, yet, but
currently my idea is to convert the ttxt subtitles into DVB subtitles,
so that VDR only needs to handle one type of subtitiles for recording
and live viewing.
Aren't dvb subtitles just
En/na Reinhard Nissl ha escrit:
Hi,
I'm pleased to announce the long awaited release 0.8.0, which integrates
the vdr-xine-network patch. You can find it on my homepage:
I finally upgraded to this version (from 0.7.6 + network patches, I
think I tried some other version but with similar
En/na Luca Olivetti ha escrit:
En/na Reinhard Nissl ha escrit:
Hi,
I'm pleased to announce the long awaited release 0.8.0, which integrates
the vdr-xine-network patch. You can find it on my homepage:
I finally upgraded to this version (from 0.7.6 + network patches, I
think I tried some
En/na Reinhard Nissl ha escrit:
Hi,
Luca Olivetti schrieb:
Is it possible that newer version generate more traffic/are more
sensible to network latencies?
Yes, at least in the buffer monitoring phase, which was introduced with
0.7.7. Try to set it to 0 in vdr-xine's setup menu
] ERROR: FreeType: error during FT_Render_Glyph 32, 3
vdr: [3936] ERROR: FreeType: error during FT_Render_Glyph 32, 3
Speicherzugriffsfehler
Apparently the AntiAlias fix worked for Luca Olivetti
Yes, and it is working now, with vdr-1.5.11 (though dvbsubtitles.c have
to be patched since
El Thu, 15 Nov 2007 19:58:43 +0100
YUP [EMAIL PROTECTED] escribió:
I successfully compiled dxr3 plugin from cvs (stable at it was
described here http://www.linuxtv.org/vdrwiki/index.php/Dxr3-plugin),
but still no luck - vdr crashes with segmentation fault.
This happened to me with the first
En/na Reinhard Nissl ha escrit:
BTW: the patch is almost untested as there are currently no subtitles
running.
FYI, if you can see astra 2d I just found that at least CBeebies and
BBC4 broadcast dvb subtitles.
Bye
--
Luca
___
vdr mailing list
En/na Stefan Lucke ha escrit:
Excat :-(
Stefan Lucke
In case it could help you: the dxr3-plugin had a similar issue, the
solution was to clear the osd each time SetAreas is called.
http://dxr3plugin.cvs.sourceforge.net/dxr3plugin/dxr3/dxr3osd_subpicture.c?r1=1.1.2.17r2=1.1.2.18
Bye
--
En/na Igor ha escrit:
So I was wondering if it would be possible to use the on board video
decoder chips of the VIA EPIA boards like the VIA EPIA EX15000G
http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboa
rd_id=450
This board mounts a CX700M2 chipset which features
El Thu, 7 Feb 2008 06:44:41 +0200
Theunis Potgieter [EMAIL PROTECTED] escribió:
On 06/02/2008, Luca Olivetti [EMAIL PROTECTED] wrote:
for hdtv - no.
I don't see the h.264 hardware decoding. mpeg4 is not h.264.
Maybe this thing can be hacked to run vdr or to be used as a
front-end
En/na Kartsa ha escrit:
I can read germany but I do not understand it :). But understood that I
could use that script to test acpi. Well this did not work. I did check
that the time was actually written in /proc/acpi/alarm. Still not waking up.
IIRC, acpi wakeup wouldn't work here if I
El Sun, 17 Feb 2008 15:46:42 +0100
Klaus Schmidinger [EMAIL PROTECTED] escribió:
Note that you may need to switch back to an older version of your
channels.conf file if you have already used version 1.5.14, because
it introduced new parameters.
In case there's no older version of
En/na Klaus Schmidinger ha escrit:
The following translation files still have untranslated texts:
ca_ES.po
el_GR.po
es_ES.po
hr_HR.po
nn_NO.po
pl_PL.po
pt_PT.po
sv_SE.po
uk_UA.po
Attached are patches for ca_ES and es_ES, beware, none is my mother
tongue, so if someone
En/na Sami Sundell ha escrit:
On Tue, Mar 04, 2008 at 10:55:53PM +0200, Sami Sundell wrote:
E-tobi's experimental VDR branch moved to 1.5.x series, so I did too,
but I'm running into some problems. Specifically, this one:
... Some version information might be good, too. VDR 1.5.17, dxr3
En/na Sami Sundell ha escrit:
On Thu, Mar 06, 2008 at 12:35:54AM +0200, Sami Sundell wrote:
Ok, now the subtitles work, but I still have problems with subtitles
and OSD together - remote becomes unresponsive and I get errors:
Mar 5 23:45:42 dvd vdr: [5102] ERROR: attempt to open OSD while
En/na Luca Olivetti ha escrit:
... and this went away when I changed the cDxr3SubpictureOsd constructor
to call the cOsd with proper level. Unless I'm missing something - and I
bet I am - the system seems to be working smoothly now.
Mmh, it should be already doing it, look at line 39
El Thu, 6 Mar 2008 19:52:49 +0200
Ville, are you listening? ;-)
If you meant me then yes I am =)
No, I meant Ville Skyttä, the plugin maintainer, there are many
Ville here :-)
[...]
Though, if you get the problem that the OSD doesn't clear
between subtitles, then see the 2. patch I'm
En/na Anssi Hannula ha escrit:
Preferably on-list, as I'm planning a similar conditional patch for
Mandriva VDR 1.6.x packages. That is, unless something better emerges.
Keep in mind that the patch could be detrimental if you have something
other than a dxr3 with a better osd (though I'm
En/na Klaus Schmidinger ha escrit:
On 03/06/08 20:37, Ville Skyttä wrote:
Hello,
The attached patch makes VDR's Makefile use pkgconfig for finding libs and
include dirs of freetype and fontconfig instead of making assumptions.
How about putting that stuff at the same place everywhere?
En/na Klaus Schmidinger ha escrit:
I'd really like to know why some broadcasters don't adhere to the standards
(even though it would be a child's game). Are they actively refusing to,
unable
to interpret the standard documents, or just flat out dumb?
[X] All of the above
;-)
Bye
--
Luca
En/na Rolf Ahrenberg ha escrit:
On Sun, 9 Mar 2008, Ville Aakko wrote:
What skin are you using? I've noticed that the only skins that are
usable (i.e. stable enough to use them) are those of text2skin plugin
- more specifically, I use enElchi. Some other were stable, too.
Anything else
Hello,
I'm releasing version 1.1.1 of the actuator plugin available at
http://www.ventoso.org/luca/vdr/
This plugin controls a linear actuator (or an horizon to horizon one)
through the parallel port with a simple circuit.
The actual changes were made for vdr-1.5.11 but I forgot to release it,
En/na Rolf Ahrenberg ha escrit:
Also, skinsoppalusikka doesn't update the palette of channel logos, if
Well, IMO the skin isn't responsible of palette updates, but the real
problem might be in the osd implemantation of DXR3 plugin.
channel logo *must* be disabled for the dxr3.
Bye
--
En/na Peter Evertz ha escrit:
I am very interested in this feature. My providers (astra/hotbird) are
smart enough not to send not to much garbage, but deleting of unused
channels is really a pain. I am at 4500 Channels in my channels.conf and
I am pretty sure that at least 30 % of them are
En/na Lauri Tischler ha escrit:
Well, upgraded and compiled.
Does command 'hg pull http://jusst.de/hg/multiproto_plus'
keep directory multiproto_plus current ?
after pulling you have to issue an hg update, but it will tell you
so anyway.
http://www.selenic.com/mercurial/wiki/
Bye
--
Luca
El Sat, 06 Sep 2008 19:22:08 +0200
Udo Richter [EMAIL PROTECTED] escribió:
Hmmm. My VDR automatically updates its channel list by itself, and
adds all channels and transponders I ever needed. (which is far from
what other receivers I know do.)
In spite of that, a couple of days ago I lost
En/na Klaus Schmidinger ha escrit:
On 09/07/08 16:48, Luca Olivetti wrote:
El Sun, 07 Sep 2008 12:11:35 +0200
Klaus Schmidinger [EMAIL PROTECTED] escribió:
t.
+ cTransfer no longer uses cRemux, and doesn't run a separate
thread any more. It just generates a PAT/PMT and sends all received
Hello,
I just acquired a dirt cheap lcd (see http://picframe.spritesserver.nl)
to complement my vdr machine, so I'm using the graphlcd plugin to drive it.
Instead of writing a graphlcd driver, I just configured it to use the
network driver then I wrote a simple client to drive the display.
This
En/na gimli ha escrit:
You got it ;)
The vanilla vdr din't work for me on multiproto and h264 with vdr 1.7.1.
I had to set LIVEBUFFER at build time and use permanent timeshift in vdr
to get an image in vdr-sxfe.
This is only for hd content or also for normal content?
I had a similar problem
En/na Gregoire Favre ha escrit:
That's not a big problem for me... what I really want to know is if
VDR-1.7.0 reccord subtitle aswell ?
Yes
(though in my case if the dish has to move, the delay makes vdr not
recognize that there are subtitles until I switch to a different
transponder and
En/na gimli ha escrit:
Hi,
read this : http://linuxtv.org/pipermail/vdr/2008-October/017948.html
I asked you before if this is only for hd content or even sd (I'm just
using sd and I see no picture with a dxr3 and heavily stuttering image
with the vdr-xine plugin)
Besides, I cannot find
En/na Torgeir Veimo ha escrit:
The mplayer plugin doesn't work when I start vdr from inittab. It
works ok if vdr is started from the console.
Maybe it needs a console to work?
I side stepped the problem by running vdr inside a screen session, so it
has a console and I can attach to it when I
En/na Luca Olivetti ha escrit:
En/na gimli ha escrit:
Hi,
read this : http://linuxtv.org/pipermail/vdr/2008-October/017948.html
I asked you before if this is only for hd content or even sd (I'm just
using sd and I see no picture with a dxr3 and heavily stuttering image
with the vdr-xine
En/na Artem Makhutov ha escrit:
Hi,
On Mon, Oct 06, 2008 at 08:09:41PM +0200, Halim Sahin wrote:
Hi,
Have you checked if xinelibout can replay the new ts stuff introduced
with vdr-1.7.1?
No, I have not checked it, but as faar as I know, the old PES stuff was
not removed from vdr. So
El Sat, 29 Nov 2008 18:10:50 + (GMT)
Dominic Morris [EMAIL PROTECTED] escribió:
On Sat, 29 Nov 2008, Luca Olivetti wrote:
FWIW I see the same with 1.7.0.
I tried various bbc channels, a couple
of itv ones and, surprisingly, I see the no title (localized)
items also on film4
En/na [EMAIL PROTECTED] ha escrit:
Hi
I have read all your exchange since beginning but I still do not understand
and
really curious to know what is the real gain to patch VDR and wait at least 30
minutes to have EPG instead of using Loadepg plugin who do the full job in 2
minutes ?
En/na Josce ha escrit:
My problem is that vdr 1.6.0 with the reelbox plugin
displays the subtitles 6 seconds too early.
Does anyone know if there is a simple way to add a
6 seconds delay to the subtitles?
I tried to look at the old subtitle plugin and how it
was done there but couldn't
En/na Klaus Schmidinger ha escrit:
...teletext subtitles are a thing from the past, the normal way
of broadcasting subtitles should be DVB subtitles. I hardly think a
DVD player would be able to handle teletext subtitles (or am I wrong here?).
While I agree that dvb subtitles are usually
En/na Klaus Schmidinger ha escrit:
On 28.02.2009 15:54, Luca Olivetti wrote:
En/na Klaus Schmidinger ha escrit:
...teletext subtitles are a thing from the past, the normal way
of broadcasting subtitles should be DVB subtitles. I hardly think a
DVD player would be able to handle teletext
En/na Klaus Schmidinger ha escrit:
Please send me the channels.conf line of itv3 - I'd like to take a look
at this myself.
ITV3;BSkyB:10906:vC56M2O0S0:S28.2E:22000:3348:3349=eng,3350=NAR:2373:0:10260:2:2054:0
Bye
--
Luca
___
vdr mailing list
En/na Klaus Schmidinger ha escrit:
On 28.02.2009 18:35, Luca Olivetti wrote:
En/na Klaus Schmidinger ha escrit:
Please send me the channels.conf line of itv3 - I'd like to take a look
at this myself.
ITV3;BSkyB:10906:vC56M2O0S0:S28.2E:22000:3348:3349=eng,3350=NAR:2373:0:10260:2:2054:0
En/na Luca Olivetti ha escrit:
En/na Klaus Schmidinger ha escrit:
On 28.02.2009 18:35, Luca Olivetti wrote:
En/na Klaus Schmidinger ha escrit:
Please send me the channels.conf line of itv3 - I'd like to take a look
at this myself.
ITV3;BSkyB:10906:vC56M2O0S0:S28.2E:22000:3348:3349=eng,3350
En/na Tony Houghton ha escrit:
On Sat, 28 Feb 2009 19:29:07 +0100
Luca Olivetti l...@ventoso.org wrote:
[Subtitles out of sync]
En/na Klaus Schmidinger ha escrit:
On 28.02.2009 18:35, Luca Olivetti wrote:
En/na Klaus Schmidinger ha escrit:
Please send me the channels.conf line of itv3
En/na Timothy D. Lenz ha escrit:
Mail should be text and any code should be limited to files that are in no
way run by the mail program.
Fact is, it *is* text. The problem is that outlook doesn't qualify as an
email reader.
Postel's law
http://en.wikipedia.org/wiki/Jon_Postel#Postel.27s_Law
On Sat, 18 Apr 2009 13:28:24 +0200
Udo Richter udo_rich...@gmx.de wrote:
This is mostly what the VDR skin interface already provides: A
semantically structured description of the interface. Most skins
translate this into a bitmapped OSD view, but they don't have to. The
skincurses plugin
En/na Rob Davis ha escrit:
I'm in a half way stage with VDR and h264. I didn't want the multipro
drivers, but wanted to get a few HD channels working with vdpau.
I have VDR working with BBC HD almost, and Sky HD +24 and a few others,
however, BBC doesn't seem to display properly, as well as
En/na Morfsta ha escrit:
If you turn Dolby Digital off in the VDR DVB menu then it will play
only the MPA track and the picture will then work fine in VDR.
I tried activating dolby digital (I usually have it set to no), and I
don't have a problem with the video (as long as I use xxmc,
En/na Rob Davis ha escrit:
I tried the turning off dolby digital and I get the Narrative track ok,
but I still get corruption on vdpau. It's like vertical banding,
I my case the bands are horizontal
reminiscent of trying to copy a video with macrovision. My pc doesn't
display it well
En/na Morfsta ha escrit:
On Tue, Apr 21, 2009 at 11:02 PM, Luca Olivetti l...@ventoso.org wrote:
I doubt it. I think it's simply a case of vdpau not working properly, or
some magic setting that has to be tweaked (I had really funky colors
until I reset the hue,saturation and contrast
En/na VDR User ha escrit:
On Thu, May 28, 2009 at 7:50 AM, Josce jo...@welho.com wrote:
Reelbox plugin still occasionally freezes, but so it has always done.
The reelbox plugin is of course a joke and I deeply regret buying the
card from Reel-Multimedia. Hopefully the VDPAU is more promising.
En/na VDR User ha escrit:
OTOH with my setup it works poorly (artifacts, banding, freezing,
changes in color, etc.) and I'm not the only one, so I'm not sure vdpau
support is mature enough for inclusion in xine-lib.
Are you sure you're not experiencing driver problems? Btw, the vdpau
devs
En/na scott ha escrit:
With live TV on SD material (e.g. BBC News), I get a lot of dropped frames
(
around 5 %) (HD is worse, around 20%):
video_out: throwing away image with pts 2405183661 because it's too old
[...]
# number of video buffers
# numeric, default: 500 - tried 500, 800, 900,
In the last weeks I'm having trouble tuning to a couple of transponders
at 28.2E
http://www.lyngsat.com/28east.html
The ITV 3 transponder (10906V) seems fine by day but with no signal at
night.
The BBCHD transponder (10847V) has some uncorrected errors that cause
artefacts, both during the
1 - 100 of 226 matches
Mail list logo
