works! Older card is found by VDR and can
tune channels, but there is no picture..
Any ideas?
It could be some hardware issue, if there is some conflict with two
cards.. But I have tried both cards in all PCI slots, no difference there.
:)
--
Teemu Suikki
http://www.z-power.fi
On Wed, 31 Jan 2007 [EMAIL PROTECTED] wrote:
Teemu Suikki wrote:
With only one card installed, both cards work fine. ...
This sounds like an interesting solution... Can you post a link to
picture showing this particular setup? :-P scnr
Bah. :)
It could be some hardware issue
solution. :)
--
Teemu Suikki
http://www.z-power.fi
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
that could be adjusted?
Both boxes use dxr3-plugin as output device, and pretty much identical
software setup (copied over from box1 to box2)..
VDR version is 1.4.5.
--
Teemu Suikki
http://www.z-power.fi
___
vdr mailing list
vdr@linuxtv.org
http
On Thu, 15 Feb 2007, Teemu Suikki wrote:
Why is the user input so slow? When I press a key in remote, there seems
to be a random delay of 0-0.5sec or so.. Sometimes it's fast, sometimes
not. It's fine in channel switching but really annoying when you a trying
to input filenames or something
On Thu, 15 Feb 2007, Laz wrote:
On Thursday 15 February 2007 11:30, Teemu Suikki wrote:
On Thu, 15 Feb 2007, Teemu Suikki wrote:
Why is the user input so slow? When I press a key in remote, there
seems to be a random delay of 0-0.5sec or so.. Sometimes it's fast,
sometimes not. It's
to stream VDR recordings, but so far I haven't been
able to get live video to work.. And even with recordings you need to
use transcoding because PS3 doesn't like MPEG-PES.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http
2008/4/29 Steffen Barszus [EMAIL PROTECTED]:
Teemu Suikki schrieb:
Has anyone written a direct UPnP/DLNA plugin, to stream out VDR
recordings and live TV to PS3 or XBOX 360?
no something like that doesnt exist. I have used a cron to fetch the m3u
of the channels list onto
2008/5/1 Gavin Hamill [EMAIL PROTECTED]:
On Thu, 2008-05-01 at 21:20 +0300, Teemu Suikki wrote:
I tried loading streamdev urls like http://vdr:3000/TS/3 with PS3
browser.. It does understand that it's some sort of stream, but I
think it mistakes it as mp3 audio for some reason
extra features like http streaming.. But still doesn't
work any better with PS3. :)
I wonder why the http streaming doesn't work, PS3 just reports some
server error but logs show that it has actually connected to the
stream just fine.
--
Teemu Suikki
http://www.z-power.fi
2008/5/3 Steffen Barszus [EMAIL PROTECTED]:
Teemu Suikki schrieb:
2008/4/29 Steffen Barszus [EMAIL PROTECTED]:
There is a good UPnP server available for linux, called Fuppes:
http://fuppes.ulrich-voelkel.de/
not tried that - found mediatomb to look more interesting
, to keep the kids quiet for a while. :)
The recordings-listing doesn't have many buttons assigned for
directories, only Open.. There could be a command to playback entire
directory, perhaps with some bookmark feature so it starts from the
episode that was previously played back.
--
Teemu Suikki
http
developer version for example?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
recompile of both..
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
can't be sure if
it's outputing something there. But I have selected digital output
in dxr3 plugin setup.
Also subtitles seem to bug a little, there's a lot of garbage on top
of the text, and sometimes the texts appear in top left corner, not in
bottom like they should.
--
Teemu Suikki
http
can see
unfilled letters where there's only the white outline and inside is
transparent.. This might be VDR bug actually, I have no idea where the
rendering takes place?
--
Teemu Suikki
http://www.z-power.fi/
its waiting in my local git
repository. I hope I can find some hours this week
to commit
to
check if that patch/hack has any effect on subtitles when used with the git
version of the plugin.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
. :)
Anyway, now the biggest problem is that I have about 1TB of recordings
recorded with older VDR.. I'd like to convert all of those to TS. :)
Is there some simple shell utility? Writing the actual script is not a
problem, if I just knew what program to use for the conversion.
--
Teemu Suikki
http
/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
etc to single
1.ts... This is because I couldn't make multiple file http
streaming work to ps3, now I don't have to worry about that. :) VDR
supports 2GB anyway if you enable it in the settings.
--
Teemu
2010/8/26 Éric Laly el...@free.fr:
Le 25/08/2010 18:43, Teemu Suikki a écrit :
Hi,
I
Hi!
This is a good idea, I didn't think about that!
I also watch my recordings with PS3, it has good support for H.264 TS too.
--
Teemu
2010/9/5 Rolf Ahrenberg rahre...@cc.hut.fi:
On Sun, 5 Sep 2010, Teemu Suikki wrote:
So basicly I would like to be able to compress vdr recording to divx
versions. :) git version is
fine except for the audio and subtitles, and 0.2.11 is fine except for
the OSD. So now we just need to combine the working features of both
versions. :)
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
-rewrite) and they also have 8bpp
removed just like above.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
the timeline
growing as the index is created. When it doesn't work, OK doesn't
bring up the timeline, nothing happens..
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
works fine with recordings where vdr index generation works too..
Any easy way to fix these somehow?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
after the first message, everything
works. This is why it never hangs when I'm actually watching the TV, I
always press the button quickly enough. :)
--
Teemu
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http
?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
frozen
for several days now, so perhaps there's no reason to bother with this
bug. :) Easy fix would be to limit the message display time to 15secs
for example, so user can't set it too high by accident.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing
-
Why doesn't it match? The descriptions are 100% identical.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
don't really understand the last check. Perhaps there should be ==
instead of != or something?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
2010/11/10 Dominic Evans oldma...@gmail.com:
On 10/11/10 09:09, Teemu Suikki wrote:
Why doesn't it match? The descriptions are 100% identical.
Check your search timer's configuration for comparing 'sub-title' when
avoiding repeats. Compare subtitle should be set to either
should be swapped?
I'm pretty sure yes worked like if present earlier, because my
timers worked just fine before upgrading..
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
ended up buying an used dxr3 card, they only cost a few bucks and
are well supported by dxr3-plugin..
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi!
I need a mp3 audio stream of live tv channels.. I tried to do it with
ffmpeg, but it doesn't work properly. No data is transferred, I guess
ffmpeg doesn't like to write to a fifo?
Any ideas?
___
vdr mailing list
vdr@linuxtv.org
much useless if there is a minute delay..
--
Teemu
2011/12/6 Johannes Truschnigg johan...@truschnigg.info:
Hi there,
On Tue, Dec 06, 2011 at 05:00:24PM +0200, Teemu Suikki wrote:
Hi!
I need a mp3 audio stream of live tv channels.. I tried to do it with ffmpeg,
but it doesn't work properly
, which I implemented (hopefully) properly.
However, some devices may ignore this pattern. I will try to find out,
which of these parameters is the offending one.
2012/2/16 Teemu Suikki tsui...@zuik.org:
Howdy!
There is an installation instructions for vdr-plugin-upnp here:
http://www.vdr
plugin that scans the
timers and modifies the channels if needed..
Even a separate script (cron job) would work, just scan timers.conf and
modify the channels when necessary?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http
on S1.0W.
Is there any way to make frontend1 higher priority, so it would be used
first if it can tune?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
;
+ dsyslog(New source 0x%x, 10sec wait forced in section
loop\n,PrevSource);
+ cCondWait::SleepMs(1);
+}
if (!DeviceHasLock)
cCondWait::SleepMs(100);
for (int i = 0; i NumFilters; i++) {
--
Teemu Suikki
http
think this happens very often.
But yes, I agree the patch could be cleaner somehow.
9.2.2013 12.50 Klaus Schmidinger klaus.schmidin...@tvdr.de kirjoitti:
On 08.02.2013 14:52, Teemu Suikki wrote:
Hi!
As I mentioned in my previous email, I'm using diseqc.conf to drive my
motorized dish.
I
Hi!
I was trying to find source code for the rotor plugin (not rotorng).. all
the links seem to be outdated. Anyone have any version?
I'm really only interested in seeing how the GotoX stuff works. I'm trying
to send gotox command from diseqc.conf, but the dish doesn't move at all.
I have the
be
included in the official release? I think all current diseqc motors have
gotox functionality, so plugins like rotor(ng) are really unnecessary if
gotox works.
--
Teemu
2013/2/12 Ales Jurik aju...@quick.cz
On 02/12/2013 12:17 PM, Teemu Suikki wrote:
Hi!
I was trying to find source code
reasonably well, but it also has
the problem that it just shows FTA or crypted, doesn't make a difference
between caid's.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I'm replying to an old message, because soon I will have similar setup so
I'm interested. :)
I currently have two tuners with fixed dish to S1.0W, and third tuner with
diseqc motor. I'm using diseqc.conf and the gotoxx patch, it works very
well!
However I'm adding fourth tuner soon. It will be
21.2.2013 10.35 Klaus Schmidinger klaus.schmidin...@tvdr.de kirjoitti:
So what you're trying to do is to bond the two devices in a way that
only takes into account the antenna position.
Maybe you could achieve this by changing cDvbTuner::GetBondingParams() in
a way that
extracts the
data from file.
Hi, Luca
Forum:
http://forum.vdr-italia.org
Web:
http://www.vdr-italia.org
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi
random summary is used from some previous scan?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
.
To what?
Gerald
!DSPAM:**5140aac1168913192934288!
__**_
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-**bin/mailman/listinfo/vdrhttp://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi
]
Symbol_rate: 2723840 (= 29.9000)
FEC_inner: 3 (0x03) [= 3/4 conv. code rate]
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
.. DVB-DescriptorTag's 65 and 67 appear in opposite order! Could it
be that VDR has transponder data still uninitialized when it is
scanning the service id, because 67 is not arrived yet?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr
won't touch the transponder data anymore.
Still a bit odd that it updated the transponder data.. S13E does not
have TID 7501 in any transponder, so where did the updated data come
from?
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr
Hi!
I have vdr 1.7.27 and epgsearch 1.0.1.beta2, from yavdr..
I'm recording Game of Thrones from Canal Digital Nordic. The third season
is starting in a few days..
The episodes have no episode name, and the description field simply says:
(1:10/s3) 3. kausi maailman suosituimmasta HBO-sarjasta.
matchLimit 95)
and let me know if it works for you.
cheers,
Christian
Am 04.04.2013 20:04, schrieb Teemu Suikki:
Hi!
I have vdr 1.7.27 and epgsearch 1.0.1.beta2, from yavdr..
I'm recording Game of Thrones from Canal Digital Nordic. The third
season is starting in a few days..
The episodes
, compareTitle, compareSubtitle,
compareSummary, compareDate, catvaluesAvoidRepeat,
compareSummaryMatchInPercent))
Seems to work now. Still needs your earlier patch in epgsearchtools.c of
course.
5.4.2013 5.48 Teemu Suikki tsui...@zuik.org kirjoitti:
I tried this, no change..
Then I added some
Hi!
I might be overlooking something really simple, but I can't figure
this out myself. :)
I'm trying to send red button to the LoadEPG plugin, to cancel the
scan. In theory, this is just:
svdrpsend hitk Menu 9 Red
(9 is the Loadepg mainmenu entry number)..
However, the above fails if there
Hi,
this would be very good, thanks! :)
--
Teemu
2013/4/12 lukkinosat lukkino...@yahoo.it:
On 09.04.2013 09:53, Teemu Suikki wrote:
Hi!
I might be overlooking something really simple, but I can't figure
this out myself. :)
I'm trying to send red button to the LoadEPG plugin, to cancel
mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
it, you simply use it like this (e.g.
from a cron job):
cpepg.pl S13.0E-318-12400-8511 T-318-1-3401
regards
davide
2013/4/18 Teemu Suikki tsui...@zuik.org
Hi!
Your patch is slightly broken, perhaps when emailing? There are a few
missing lines in the huffman tables.
I compared these two
/vdr-loadepg-0.2.6.tgz
- Add comand STOP to SVDRP interface
- Apply patch for correct timezone
Hi, Luca
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi
in order when finding tuner for given
satellite. That way you could have priorities, so a tuner with
positioner is not wasted if some other tuner can tune..
Just my thoughts.. :)
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr
Hi!
Is anyone using this patch with Sky Italia? It doesn't work for me.
Also with Sky UK, I have full epg for many channels, but missing for some.
For example ITV1 has 7 days epg, but ITV2-4 have none.
This patch looked so promising at first, but now I'm thinking of changing
back to LoadEPG
Handling of VDSB should be improved somehow, or at least add some
configuration.
It's annoying if VDR is recording multiple channels, and one channel has
VDSB.. emergency exit at this point will break all the other recordings,
which otherwise would be fine.
Also I think VDR should try tuning to
uot;duping" is normal a/v sync, what I see is something
different.
This is VDR 2.2.0, and quite recent softhddevice from yavdr ppa:
1:0.6.1rc1.git20150924.1231-0yavdr0~trusty
And the very same hardware worked just nicely with full yavdr install,
with vdr 2.0.x and some old version of softhddevice.
in: release o=LP-PPA-yavdr-testing-vdr
> Pin-Priority: 1001
>
> Package: *
> Pin: release o=LP-PPA-yavdr-testing-xbmc
> Pin-Priority: 1001
>
> Package: *
> Pin: release o=LP-PPA-yavdr-testing-yavdr
> Pin-Priority: 1001
>
> --- cut ---
>
> And finally run the u
biggest problem is the
lack of transcoding, but that would be very difficult to add.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Schmidinger <klaus.schmidin...@tvdr.de>:
> On 26.11.2017 19:09, Teemu Suikki wrote:
>>
>> I know I'm replying to a year old thread, but I'm having the exact same
>> problem.
>>
>> I upgraded my system from kernel 3.16.0 to 4.4.0, and also TBS dvb
>> driver
t even once?
>
> Klaus
>
>
>> 2017-11-27 0:08 GMT+02:00 Klaus Schmidinger <klaus.schmidin...@tvdr.de>:
>>>
>>> On 26.11.2017 19:09, Teemu Suikki wrote:
>>>>
>>>>
>>>> I know I'm replying to a year old thread, but I'm having the
other broadcaster also changes pids frequently but
> in an unpredictable way, then this doesn't help and pid changes mustn't be
> ignored.
>
>
>
>
>
> ___
> vdr mailing list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
VDRfuse
Fuse filesystem to "autoedit" VDR recordings!
(c) Teemu Suikki 2017
Based on the fuse example "passthrough_fh.c"
Latest version:
https://github.com/Zuikkis/vdrfuse
Using:
-
This filesystem can be used to mount the VDR recordings direc
am, it surely should
correct itself? Maybe try retuning with different tuner instead of
throwing 3000 lines of errors to log? :)
2017-11-27 20:04 GMT+02:00 Teemu Suikki <tsui...@zuik.org>:
> I now switched to the open source TBS drivers. They seem more stable
> than the official pr
ppen daily. It would however be great if it were fixed -
> hopefully we'll get to that point.
>
> ___
> vdr mailing list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Teemu Suikki
http://www.z-p
se it happens again.
2018-01-18 12:26 GMT+02:00 Klaus Schmidinger <klaus.schmidin...@tvdr.de>:
> On 18.01.2018 08:54, Teemu Suikki wrote:
>>
>> Ok, it might be the same thing.
>>
>> I added some debug as Klaus suggested. After restart, vdr instantly
>&
:37 GMT+02:00 Klaus Schmidinger <klaus.schmidin...@tvdr.de>:
> On 18.01.2018 21:26, Teemu Suikki wrote:
>>
>> Ok, I did some debugging.
>>
>> First of all, I noticed something weird that perhaps is not even
>> related to this problem. In vdr.c there is a
, and does not try
again.
17.1.2018 22.28 "Jouni Karvo" <jouni.ka...@iki.fi> kirjoitti:
> Klaus Schmidinger kirjoitti 17.01.2018 klo 11:59:
>
>> On 16.01.2018 19:44, Teemu Suikki wrote:
>>
>>> Hi,
>>>
>>> I j
the
.del directories easily from the command line. After manually deleting
them, disk is now only 85% full.. And that's 4TB drive. :) So there
were quite a bit of .del directories.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
around.. :) If
softhddevice is suspended and vdr left "idle", it will never enter
housekeeping because of the check.
--
Teemu Suikki
http://www.z-power.fi/
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
77 matches
Mail list logo